PIMG-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: PIMG-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, INETMROUTE-STD-MIB, INET-ADDRESS-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 pimgMIB 1.3.6.1.3.1
The MIB module for management of PIM routers.
     pimgMIBObjects 1.3.6.1.3.1.1
         pimgTraps 1.3.6.1.3.1.1.0
             pimgNeighborLoss 1.3.6.1.3.1.1.0.1
A pimgNeighborLoss trap signifies the loss of an adjacency with a neighbor. This trap should be generated when the neighbor timer expires, and the router has no other neighbors on the same interface with a lower IP address than itself.
         pimg 1.3.6.1.3.1.1.1
             pimgJoinPruneInterval 1.3.6.1.3.1.1.1.1 integer32 read-write
The default interval at which periodic PIM-SM Join/Prune messages are to be sent.
             pimgInterfaceTable 1.3.6.1.3.1.1.1.2 no-access
The (conceptual) table listing the router's PIM interfaces. IGMP and PIM are enabled on all interfaces listed in this table.
                 pimgInterfaceEntry 1.3.6.1.3.1.1.1.2.1 no-access
An entry (conceptual row) in the pimgInterfaceTable.
                     pimgInterfaceIfIndex 1.3.6.1.3.1.1.1.2.1.1 interfaceindex no-access
The ifIndex value of this PIM interface.
                     pimgInterfaceAddressType 1.3.6.1.3.1.1.1.2.1.2 inetaddresstype read-only
A value indicating the address family of the address contained in pimgInterfaceAddress. Legal values correspond to the subset of address families for which PIM routing is supported.
                     pimgInterfaceAddress 1.3.6.1.3.1.1.1.2.1.3 inetaddress read-only
The IP address of the PIM interface.
                     pimgInterfaceNetMaskLen 1.3.6.1.3.1.1.1.2.1.4 integer read-only
The length in bits of the network mask which when combined with the corresponding value of pimgInterfaceAddress identifies the address of the network to which the PIM interface is attached.
                     pimgInterfaceMode 1.3.6.1.3.1.1.1.2.1.5 integer read-only
The configured mode of this PIM interface. A value of sparseDense is only valid for PIMv1. Enumeration: 'sparseDense': 3, 'dense': 1, 'sparse': 2.
                     pimgInterfaceDRType 1.3.6.1.3.1.1.1.2.1.6 inetaddresstype read-only
A value indicating the address family of the address contained in pimgInterfaceDR. The value MUST be the same as the value of pimgInterfaceAddressType.
                     pimgInterfaceDR 1.3.6.1.3.1.1.1.2.1.7 inetaddress read-only
The Designated Router on this PIM interface. For point-to-point interfaces, pimgInterfaceDR will be 0.0.0.0 in the case of an IPv4 entry, and 0:0:0:0:0:0:0:0 in the case of an IPv6 entry.
                     pimgInterfaceHelloInterval 1.3.6.1.3.1.1.1.2.1.8 integer32 read-only
The frequency at which PIM Hello messages are transmitted on this interface.
                     pimgInterfaceStatus 1.3.6.1.3.1.1.1.2.1.9 rowstatus read-only
The status of this entry. Creating the entry enables PIM on the interface; destroying the entry disables PIM on the interface.
                     pimgInterfaceJoinPruneInterval 1.3.6.1.3.1.1.1.2.1.10 integer32 read-only
The frequency at which PIM Join/Prune messages are transmitted on this PIM interface. The default value of this object is the pimgJoinPruneInterval.
                     pimgInterfaceCBSRPreference 1.3.6.1.3.1.1.1.2.1.11 integer32 read-only
The preference value for the local interface as a candidate bootstrap router. The value of -1 is used to indicate that the local interface is not a candidate BSR interface.
             pimgNeighborTable 1.3.6.1.3.1.1.1.3 no-access
The (conceptual) table listing the router's PIM neighbors.
                 pimgNeighborEntry 1.3.6.1.3.1.1.1.3.1 no-access
An entry (conceptual row) in the pimgNeighborTable.
                     pimgNeighborAddressType 1.3.6.1.3.1.1.1.3.1.1 inetaddresstype no-access
A value indicating the address family of the address contained in pimgNeighborAddress. Legal values correspond to the subset of address families for which PIM routing is supported.
                     pimgNeighborAddress 1.3.6.1.3.1.1.1.3.1.2 inetaddress no-access
The IP address of the PIM neighbor for which this entry contains information.
                     pimgNeighborIfIndex 1.3.6.1.3.1.1.1.3.1.3 interfaceindex read-only
The value of ifIndex for the interface used to reach this PIM neighbor.
                     pimgNeighborUpTime 1.3.6.1.3.1.1.1.3.1.4 timeticks read-only
The time since this PIM neighbor (last) became a neighbor of the local router.
                     pimgNeighborExpiryTime 1.3.6.1.3.1.1.1.3.1.5 timeticks read-only
The minimum time remaining before this PIM neighbor will be aged out.
                     pimgNeighborMode 1.3.6.1.3.1.1.1.3.1.6 integer read-only
The active PIM mode of this neighbor. This object is deprecated for PIMv2 routers since all neighbors on the interface must be either dense or sparse as determined by the protocol running on the interface. Enumeration: 'dense': 1, 'sparse': 2.
             pimgInetMRouteTable 1.3.6.1.3.1.1.1.4 no-access
The (conceptual) table listing PIM-specific information on a subset of the rows of the inetMRouteTable defined in the Inet Multicast MIB.
                 pimgInetMRouteEntry 1.3.6.1.3.1.1.1.4.1 no-access
An entry (conceptual row) in the pimgInetMRouteTable. There is one entry per entry in the inetMRouteTable whose incoming interface is running PIM.
                     pimgInetMRouteUpstreamAssertTimer 1.3.6.1.3.1.1.1.4.1.1 timeticks read-only
The time remaining before the router changes its upstream neighbor back to its RPF neighbor. This timer is called the Assert timer in the PIM Sparse and Dense mode specification. A value of 0 indicates that no Assert has changed the upstream neighbor away from the RPF neighbor.
                     pimgInetMRouteAssertMetric 1.3.6.1.3.1.1.1.4.1.2 integer32 read-only
The metric advertised by the assert winner on the upstream interface, or 0 if no such assert is in received.
                     pimgInetMRouteAssertMetricPref 1.3.6.1.3.1.1.1.4.1.3 integer32 read-only
The preference advertised by the assert winner on the upstream interface, or 0 if no such assert is in effect.
                     pimgInetMRouteAssertRPTBit 1.3.6.1.3.1.1.1.4.1.4 truthvalue read-only
The value of the RPT-bit advertised by the assert winner on the upstream interface, or false if no such assert is in effect.
                     pimgInetMRouteFlags 1.3.6.1.3.1.1.1.4.1.5 bits read-only
This object describes PIM-specific flags related to a multicast state entry. See the PIM Sparse Mode specification for the meaning of the RPT and SPT bits. Bits: 'spt': 1, 'rpt': 0.
             pimgRPTable 1.3.6.1.3.1.1.1.5 no-access
The (conceptual) table listing PIM version 1 information for the Rendezvous Points (RPs) for multicast groups. This table is deprecated since its function is replaced by the pimgRPSetTable for PIM version 2.
                 pimgRPEntry 1.3.6.1.3.1.1.1.5.1 no-access
An entry (conceptual row) in the pimgRPTable. There is one entry per RP address for each multicast group.
                     pimgRPGroupAddressType 1.3.6.1.3.1.1.1.5.1.1 inetaddresstype no-access
A value indicating the address family of the address contained in pimgRPGroupAddress. Legal values are: unknown(0), ipv4(1), ipv6(2), dns(16)
                     pimgRPGroupAddress 1.3.6.1.3.1.1.1.5.1.2 inetaddress no-access
The multicast group address for which this entry contains information about an RP.
                     pimgRPAddressType 1.3.6.1.3.1.1.1.5.1.3 inetaddresstype no-access
A value indicating the address family of the address contained in pimgRPAddress. The value MUST be the same as the value of pimgRPGroupAddressType.
                     pimgRPAddress 1.3.6.1.3.1.1.1.5.1.4 inetaddress no-access
The unicast address of the RP.
                     pimgRPState 1.3.6.1.3.1.1.1.5.1.5 integer read-only
The state of the RP. Enumeration: 'down': 2, 'up': 1.
                     pimgRPStateTimer 1.3.6.1.3.1.1.1.5.1.6 timeticks read-only
The minimum time remaining before the next state change. When pimgRPState is up, this is the minimum time which must expire until it can be declared down. When pimgRPState is down, this is the time until it will be declared up (in order to retry).
                     pimgRPLastChange 1.3.6.1.3.1.1.1.5.1.7 timeticks read-only
The value of sysUpTime at the time when the corresponding instance of pimgRPState last changed its value.
                     pimgRPRowStatus 1.3.6.1.3.1.1.1.5.1.8 rowstatus read-only
The status of this row, by which new entries may be created, or old entries deleted from this table.
             pimgRPSetTable 1.3.6.1.3.1.1.1.6 no-access
The (conceptual) table listing PIM information for candidate Rendezvous Points (RPs) for multicast groups. When the local router is the BSR, this information is obtained from received Candidate-RP- Advertisements. When the local router is not the BSR, this information is obtained from received RP- Set messages.
                 pimgRPSetEntry 1.3.6.1.3.1.1.1.6.1 no-access
An entry (conceptual row) in the pimgRPSetTable.
                     pimgRPSetGroupAddressType 1.3.6.1.3.1.1.1.6.1.1 inetaddresstype no-access
A value indicating the address family of the address contained in pimgRPSetGroupAddress. Legal values correspond to the subset of address families for which PIM routing is supported.
                     pimgRPSetGroupAddress 1.3.6.1.3.1.1.1.6.1.2 inetaddress no-access
The IP multicast group address which, when combined with the value of pimgRPSetGroupMaskLen, gives the group prefix for which this entry contains information about the Candidate-RP.
                     pimgRPSetGroupMaskLen 1.3.6.1.3.1.1.1.6.1.3 integer no-access
The length in bits of the mask which, when combined with pimgRPSetGroupAddress, gives the group prefix for which this entry contains information about the Candidate-RP.
                     pimgRPSetAddressType 1.3.6.1.3.1.1.1.6.1.4 inetaddresstype no-access
A value indicating the address family of the address contained in pimgRPSetAddress. The value MUST be the same as the value of pimgRPSetGroupAddressType.
                     pimgRPSetAddress 1.3.6.1.3.1.1.1.6.1.5 inetaddress no-access
The address of the Candidate-RP.
                     pimgRPSetHoldTime 1.3.6.1.3.1.1.1.6.1.6 integer32 read-only
The holdtime of a Candidate-RP. If the local router is not the BSR, this value is 0.
                     pimgRPSetExpiryTime 1.3.6.1.3.1.1.1.6.1.7 timeticks read-only
The minimum time remaining before the Candidate-RP will be declared down. If the local router is not the BSR, this value is 0.
                     pimgRPSetComponent 1.3.6.1.3.1.1.1.6.1.8 integer32 no-access
A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value.
             pimgInetMRouteNextHopTable 1.3.6.1.3.1.1.1.7 no-access
The (conceptual) table listing PIM-specific information on a subset of the rows of the inetMRouteNextHopTable defined in the IP Multicast MIB.
                 pimgInetMRouteNextHopEntry 1.3.6.1.3.1.1.1.7.1 no-access
An entry (conceptual row) in the pimgInetMRouteNextHopTable. There is one entry per entry in the inetMRouteNextHopTable whose interface is running PIM and whose inetMRouteNextHopState is pruned(1).
                     pimgInetMRouteNextHopPruneReason 1.3.6.1.3.1.1.1.7.1.2 integer read-only
This object indicates why the downstream interface was pruned, whether in response to a PIM prune message or due to PIM Assert processing. Enumeration: 'assert': 3, 'other': 1, 'prune': 2.
             pimgCandidateRPTable 1.3.6.1.3.1.1.1.11 no-access
The (conceptual) table listing the multicast groups for which the local router is to advertise itself as a Candidate-RP when the value of pimgComponentCRPHoldTime is non-zero. If this table is empty, then the local router will advertise itself as a Candidate-RP for all groups (providing the value of pimgComponentCRPHoldTime is non-zero).
                   pimgCandidateRPEntry 1.3.6.1.3.1.1.1.11.1 no-access
An entry (conceptual row) in the pimgCandidateRPTable.
                       pimgCandidateRPGroupAddressType 1.3.6.1.3.1.1.1.11.1.1 inetaddresstype no-access
A value indicating the address family of the address contained in pimgCandidateRPGroupAddress. Legal values correspond to the subset of address families for which PIM routing is supported.
                       pimgCandidateRPGroupAddress 1.3.6.1.3.1.1.1.11.1.2 inetaddress no-access
The multicast group address which, when combined with the corresponding value of pimgCandidateRPGroupMaskLen, identifies a group prefix for which the local router will advertise itself as a Candidate-RP.
                       pimgCandidateRPGroupMaskLen 1.3.6.1.3.1.1.1.11.1.3 integer no-access
The length in bits of the mask which, when combined with pimgCandidateRPGroupAddress, identifies a group prefix for which the local router will advertise itself as a Candidate-RP.
                       pimgCandidateRPAddressType 1.3.6.1.3.1.1.1.11.1.4 inetaddresstype read-only
A value indicating the address family of the address contained in pimgCandidateRPAddress. The value MUST be the same as the value of pimgCandidateRPGroupAddressType.
                       pimgCandidateRPAddress 1.3.6.1.3.1.1.1.11.1.5 inetaddress read-only
The (unicast) address of the interface which will be advertised as a Candidate-RP.
                       pimgCandidateRPRowStatus 1.3.6.1.3.1.1.1.11.1.6 rowstatus read-only
The status of this row, by which new entries may be created, or old entries deleted from this table.
             pimgComponentTable 1.3.6.1.3.1.1.1.12 no-access
The (conceptual) table containing objects specific to a PIM domain. One row exists for each domain to which the router is connected. A PIM-SM domain is defined as an area of the network over which Bootstrap messages are forwarded. Typically, a PIM- SM router will be a member of exactly one domain. This table also supports, however, routers which may form a border between two PIM-SM domains and do not forward Bootstrap messages between them.
                   pimgComponentEntry 1.3.6.1.3.1.1.1.12.1 no-access
An entry (conceptual row) in the pimgComponentTable.
                       pimgComponentIndex 1.3.6.1.3.1.1.1.12.1.1 integer32 no-access
A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value. Routers that only support membership in a single PIM-SM domain should use a pimgComponentIndex value of 1.
                       pimgComponentBSRAddressType 1.3.6.1.3.1.1.1.12.1.2 inetaddresstype read-only
A value indicating the address family of the address contained in pimgComponentBSRAddress. Legal values correspond to the subset of address families for which PIM routing is supported.
                       pimgComponentBSRAddress 1.3.6.1.3.1.1.1.12.1.3 inetaddress read-only
The address of the bootstrap router (BSR) for the local PIM region.
                       pimgComponentBSRExpiryTime 1.3.6.1.3.1.1.1.12.1.4 timeticks read-only
The minimum time remaining before the bootstrap router in the local domain will be declared down. For candidate BSRs, this is the time until the component sends an RP-Set message. For other routers, this is the time until it may accept an RP-Set message from a lower candidate BSR.
                       pimgComponentCRPHoldTime 1.3.6.1.3.1.1.1.12.1.5 integer32 read-only
The holdtime of the component when it is a candidate RP in the local domain. The value of 0 is used to indicate that the local system is not a Candidate-RP.
                       pimgComponentStatus 1.3.6.1.3.1.1.1.12.1.6 rowstatus read-only
The status of this entry. Creating the entry creates another protocol instance; destroying the entry disables a protocol instance.
     pimgMIBConformance 1.3.6.1.3.1.2
         pimgMIBCompliances 1.3.6.1.3.1.2.1
             pimgV1MIBCompliance 1.3.6.1.3.1.2.1.1
The compliance statement for routers running PIMv1 and implementing the PIM MIB.
             pimgSparseV2MIBCompliance 1.3.6.1.3.1.2.1.2
The compliance statement for routers running PIM Sparse Mode and implementing the PIM MIB.
             pimgDenseV2MIBCompliance 1.3.6.1.3.1.2.1.3
The compliance statement for routers running PIM Dense Mode and implementing the PIM MIB.
         pimgMIBGroups 1.3.6.1.3.1.2.2
             pimgNotificationGroup 1.3.6.1.3.1.2.2.1
A collection of notifications for signaling important PIM events.
             pimgV2MIBGroup 1.3.6.1.3.1.2.2.2
A collection of objects to support management of PIM Sparse Mode (version 2) routers.
             pimgV2CandidateRPMIBGroup 1.3.6.1.3.1.2.2.3
A collection of objects to support configuration of which groups a router is to advertise itself as a Candidate-RP.
             pimgV1MIBGroup 1.3.6.1.3.1.2.2.4
A collection of objects to support management of PIM (version 1) routers.
             pimgNextHopGroup 1.3.6.1.3.1.2.2.5
A collection of optional objects to provide per- next hop information for diagnostic purposes. Supporting this group may add a large number of instances to a tree walk, but the information in this group can be extremely useful in tracking down multicast connectivity problems.
             pimgAssertGroup 1.3.6.1.3.1.2.2.6
A collection of optional objects to provide extra information about the assert election process. There is no protocol reason to keep such information, but some implementations may already keep this information and make it available. These objects can also be very useful in debugging connectivity or duplicate packet problems, especially if the assert winner does not support the PIM and Inet Multicast MIBs.
             pimgDenseV2MIBGroup 1.3.6.1.3.1.2.2.7
A collection of objects to support management of PIM Dense Mode (version 2) routers.