PEA-TEST-IPDSLAM: View SNMP OID List / Download MIB

VENDOR: ERICSSON AB


 Home MIB: PEA-TEST-IPDSLAM
Download as:   
PEM-STANDARD, SNMPv2-CONF, SNMPv2-SMI, DIESEL-SMI, SNMPv2-TC, PEA-IF-IPDSLAM, PEA-BRIDGE-IPDSLAM

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 peaTestIpDslam 1.3.6.1.4.1.193.72.300.20
In this module are defined the control entries for input and output data for SELT (loop qualification) and NOISE tests.
       peaTestIpDslamObjects 1.3.6.1.4.1.193.72.300.20.1
           seltTestInputTable 1.3.6.1.4.1.193.72.300.20.1.1 no-access
This table provides the input parameters for the SELT test.
               seltTestInputEntry 1.3.6.1.4.1.193.72.300.20.1.1.1 no-access
An entry contains input parameters for the SELT test for the subscriber line identified by lineIndex.
                   seltNoiseNeAct 1.3.6.1.4.1.193.72.300.20.1.1.1.1 integer read-write
Value that indicates if Near-end noise should be measured or pre-selected. If the noise should be measured this should be Activated(1). If the noise should be pre-selected seltNoiseNeAct should be set to Deactivated(0). Enumeration: 'deactivated': 0, 'activated': 1.
                   seltNoiseFeAct 1.3.6.1.4.1.193.72.300.20.1.1.1.2 integer read-write
Value that indicates if Far-end noise should be measured or pre-selected. If the noise should be measured this should be Activated(1). If the noise should be pre-selected seltNoiseFeAct should be set to Deactivated(0). Enumeration: 'deactivated': 0, 'activated': 1.
                   seltAdvOutputTableAct 1.3.6.1.4.1.193.72.300.20.1.1.1.3 integer read-write
Switch that activates presentation of tone information or deactivates it. Enumeration: 'deactivated': 0, 'activated': 1.
                   seltToneProfile 1.3.6.1.4.1.193.72.300.20.1.1.1.8 integer read-write
Tone profile for different system configurations. The unused values for this parameter are reserved for comming standards or future proprietary techniques. Enumeration: 'g9923AnnexA': 13, 'g9923AnnexB': 14, 'g9921IsdnNonOverlapped': 4, 'g9923ReAnnexAandL': 16, 'etsi': 1, 'ansit1413': 0, 'g9921PotsNonOverlapped': 2, 'g9923AnnexJ': 15, 'g9925AnnexB': 19, 'g9925AnnexA': 18, 'g9921PotsOverlapped': 3, 'g9922PotsNonOverlapped': 8, 'sadsl64': 128, 'g9923ReNarrowPsdAnnexAandL': 17, 'g9925AnnexM': 20.
                   seltVop 1.3.6.1.4.1.193.72.300.20.1.1.1.9 unsigned32 read-write
Velocity of propagation is the speed at which an electric signal passes through a cable.
                   seltUsToneMask 1.3.6.1.4.1.193.72.300.20.1.1.1.10 octet string read-write
Upstream active tones assumed in capacity estimation. Using single bits in integer set specific tones on /off. Total number of tones is 256.
                   seltDsToneMask 1.3.6.1.4.1.193.72.300.20.1.1.1.11 octet string read-write
Downstream active tones assumed in capacity estimation. Using single bits in integer set specific tones on /off. Total number of tones is 512.
                   seltUsTransmitLevel 1.3.6.1.4.1.193.72.300.20.1.1.1.12 integer32 read-write
Upstream transmit level.
                   seltDsTransmitLevel 1.3.6.1.4.1.193.72.300.20.1.1.1.13 integer32 read-write
Downstream transmit level.
                   seltExtSplitterType 1.3.6.1.4.1.193.72.300.20.1.1.1.14 integer read-write
External splitter filter type. This parameter is used to inform the SELT software about any installed external splitter filter. The SELT performance is affected by this parameter. The unused values for this parameter are reserved for coming external splitter types or future proprietary options. Enumeration: 'edf324EtsiNcd90130R1a': 3, 'edf324Ncd90127R1a': 2, 'edf110i': 1, 'kroneIsdn': 4, 'noneOrPOTS': 0.
           seltTestBasicOutputTable 1.3.6.1.4.1.193.72.300.20.1.3 no-access
This table provides the basic output parameters for the SELT test.
               seltTestBasicOutputEntry 1.3.6.1.4.1.193.72.300.20.1.3.1 no-access
An entry contains the basic output parameters for the SELT test for the subscriber line identified by lineIndex.
                   seltLength 1.3.6.1.4.1.193.72.300.20.1.3.1.1 unsigned32 read-only
Loop length to termination.
                   seltSingleAttVal 1.3.6.1.4.1.193.72.300.20.1.3.1.2 unsigned32 read-only
Attenuation at 300kHz.
                   seltAdslDeployment 1.3.6.1.4.1.193.72.300.20.1.3.1.3 integer read-only
Parameter indicating the possibility for ADSL deployment. A value of Possible(0) indicates that the tested loop is possible for ADSL Deployment, Uncertain(1) indicates that it might be possible but some uncertainties exist. A value of NotPossible(2) indicates that ADSL deployment is not possible on the tested loop. Decision is based on parameters calculated in the selt algorithm. Enumeration: 'notPossible': 2, 'uncertain': 1, 'possible': 0.
                   seltCapacityUs 1.3.6.1.4.1.193.72.300.20.1.3.1.4 unsigned32 read-only
Total loop capacity in the upstream direction.
                   seltCapacityDs 1.3.6.1.4.1.193.72.300.20.1.3.1.5 unsigned32 read-only
Total loop capacity in the downstream direction.
                   seltTermination 1.3.6.1.4.1.193.72.300.20.1.3.1.6 integer read-only
Loop termination at customer side. The values between 6 and 254 are to be defined. Enumeration: 'cpePowerOnAnnexA': 3, 'cpePowerOnAnnexB': 4, 'short': 1, 'unknown': 255, 'cpePowerOnAnnexC': 5, 'open': 0, 'matched': 2.
                   seltBasicReliability 1.3.6.1.4.1.193.72.300.20.1.3.1.7 integer read-only
Reliability of the parameters in the seltTestBasicOutputTable. The values between 7 and 255 are to be defined. Enumeration: 'notRealiable': 2, 'modReliable': 1, 'reliable': 0, 'unsupportedHw': 4, 'shortLineReliable': 5, 'cpeDetected': 6, 'newMeasReq': 3.
                   seltUSMeanNoiseLevel 1.3.6.1.4.1.193.72.300.20.1.3.1.8 integer32 read-only
The mean US noise level present on the line seen from IPDSLAM.
                   seltDSMeanNoiseLevel 1.3.6.1.4.1.193.72.300.20.1.3.1.9 integer32 read-only
The mean DS noise level present on the line seen from IPDSLAM.
                   seltAttenLimit 1.3.6.1.4.1.193.72.300.20.1.3.1.10 unsigned32 read-only
Reported maximum measurable/reliable attenuation @ 300 kHz.
           seltTestAdvOutputTable 1.3.6.1.4.1.193.72.300.20.1.4 no-access
This table provides the advanced output parameters for the SELT test.
               seltTestAdvOutputEntry 1.3.6.1.4.1.193.72.300.20.1.4.1 no-access
An entry contains the advanced output parameters for the SELT test for the subscriber line identified by lineIndex.
                   seltEcho0 1.3.6.1.4.1.193.72.300.20.1.4.1.1 octet string read-only
Magnitude of the Echo Frequency Response of the line. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltEcho1 1.3.6.1.4.1.193.72.300.20.1.4.1.2 octet string read-only
Magnitude of the Echo Frequency Response of the line. Part 1. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltEcho2 1.3.6.1.4.1.193.72.300.20.1.4.1.3 octet string read-only
Magnitude of the Echo Frequency Response of the line. Part 2. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltEcho3 1.3.6.1.4.1.193.72.300.20.1.4.1.4 octet string read-only
Magnitude of the Echo Frequency Response of the line. Part 3. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltInsertionLoss0 1.3.6.1.4.1.193.72.300.20.1.4.1.5 octet string read-only
Line Insertion loss (attenuation) per tone. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltInsertionLoss1 1.3.6.1.4.1.193.72.300.20.1.4.1.6 octet string read-only
Line Insertion loss (attenuation) per tone. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltInsertionLoss2 1.3.6.1.4.1.193.72.300.20.1.4.1.7 octet string read-only
Line Insertion loss (attenuation) per tone. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltInsertionLoss3 1.3.6.1.4.1.193.72.300.20.1.4.1.8 octet string read-only
Line Insertion loss (attenuation) per tone. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltNoiseNe0 1.3.6.1.4.1.193.72.300.20.1.4.1.9 octet string read-only
Near-end line noise per tone in Upstream band. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltNoiseNe1 1.3.6.1.4.1.193.72.300.20.1.4.1.10 octet string read-only
Near-end line noise per tone in Upstream band. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltNoiseNe2 1.3.6.1.4.1.193.72.300.20.1.4.1.11 octet string read-only
Near-end line noise per tone in Upstream band. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltNoiseNe3 1.3.6.1.4.1.193.72.300.20.1.4.1.12 octet string read-only
Near-end line noise per tone in Upstream band. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltNoiseFe0 1.3.6.1.4.1.193.72.300.20.1.4.1.13 octet string read-only
Far-end line noise per tone in Downstream band. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltNoiseFe1 1.3.6.1.4.1.193.72.300.20.1.4.1.14 octet string read-only
Far-end line noise per tone in Downstream band. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltNoiseFe2 1.3.6.1.4.1.193.72.300.20.1.4.1.15 octet string read-only
Far-end line noise per tone in Downstream band. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltNoiseFe3 1.3.6.1.4.1.193.72.300.20.1.4.1.16 octet string read-only
Far-end line noise per tone in Downstream band. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltSnrNe0 1.3.6.1.4.1.193.72.300.20.1.4.1.17 octet string read-only
Signal to Noise ration per tone in Upstream band. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltSnrNe1 1.3.6.1.4.1.193.72.300.20.1.4.1.18 octet string read-only
Signal to Noise ration per tone in Upstream band. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltSnrNe2 1.3.6.1.4.1.193.72.300.20.1.4.1.19 octet string read-only
Signal to Noise ration per tone in Upstream band. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltSnrNe3 1.3.6.1.4.1.193.72.300.20.1.4.1.20 octet string read-only
Signal to Noise ration per tone in Upstream band. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltSnrFe0 1.3.6.1.4.1.193.72.300.20.1.4.1.21 octet string read-only
Signal to Noise ration per tone in Downstream band. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltSnrFe1 1.3.6.1.4.1.193.72.300.20.1.4.1.22 octet string read-only
Signal to Noise ration per tone in Downstream band. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltSnrFe2 1.3.6.1.4.1.193.72.300.20.1.4.1.23 octet string read-only
Signal to Noise ration per tone in Downstream band. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltSnrFe3 1.3.6.1.4.1.193.72.300.20.1.4.1.24 octet string read-only
Signal to Noise ration per tone in Downstream band. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltBitLoadingEstNe0 1.3.6.1.4.1.193.72.300.20.1.4.1.25 octet string read-only
Estimate of the maximum attainable load of bits per tone in Upstream band. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltBitLoadingEstNe1 1.3.6.1.4.1.193.72.300.20.1.4.1.26 octet string read-only
Estimate of the maximum attainable load of bits per tone in Upstream band. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltBitLoadingEstFe0 1.3.6.1.4.1.193.72.300.20.1.4.1.27 octet string read-only
Estimate of the maximum attainable load of bits per tone in Downstream band. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltBitLoadingEstFe1 1.3.6.1.4.1.193.72.300.20.1.4.1.28 octet string read-only
Estimate of the maximum attainable load of bits per tone in Downstream band. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltInsertionLoss4 1.3.6.1.4.1.193.72.300.20.1.4.1.29 octet string read-only
Line Insertion loss (attenuation) per tone. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltInsertionLoss5 1.3.6.1.4.1.193.72.300.20.1.4.1.30 octet string read-only
Line Insertion loss (attenuation) per tone. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltInsertionLoss6 1.3.6.1.4.1.193.72.300.20.1.4.1.31 octet string read-only
Line Insertion loss (attenuation) per tone. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltInsertionLoss7 1.3.6.1.4.1.193.72.300.20.1.4.1.32 octet string read-only
Line Insertion loss (attenuation) per tone. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltNoiseFe4 1.3.6.1.4.1.193.72.300.20.1.4.1.33 octet string read-only
Far-end line noise per tone in Downstream band. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltNoiseFe5 1.3.6.1.4.1.193.72.300.20.1.4.1.34 octet string read-only
Far-end line noise per tone in Downstream band. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltNoiseFe6 1.3.6.1.4.1.193.72.300.20.1.4.1.35 octet string read-only
Far-end line noise per tone in Downstream band. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltNoiseFe7 1.3.6.1.4.1.193.72.300.20.1.4.1.36 octet string read-only
Far-end line noise per tone in Downstream band. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltSnrFe4 1.3.6.1.4.1.193.72.300.20.1.4.1.37 octet string read-only
Signal to Noise ration per tone in Downstream band. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltSnrFe5 1.3.6.1.4.1.193.72.300.20.1.4.1.38 octet string read-only
Signal to Noise ration per tone in Downstream band. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltSnrFe6 1.3.6.1.4.1.193.72.300.20.1.4.1.39 octet string read-only
Signal to Noise ration per tone in Downstream band. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltSnrFe7 1.3.6.1.4.1.193.72.300.20.1.4.1.40 octet string read-only
Signal to Noise ration per tone in Downstream band. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltBitLoadingEstFe2 1.3.6.1.4.1.193.72.300.20.1.4.1.41 octet string read-only
Estimate of the maximum attainable load of bits per tone in Downstream band. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltBitLoadingEstFe3 1.3.6.1.4.1.193.72.300.20.1.4.1.42 octet string read-only
Estimate of the maximum attainable load of bits per tone in Downstream band. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltTDR0 1.3.6.1.4.1.193.72.300.20.1.4.1.43 octet string read-only
Time Domain Reflectometry (TDR) impulse diagram equivalent. Part 0. Consecutive values are spaced 1/(1024*4312.5) seconds in time. The value spacing can be interpretated in a length unit equal to [x meter], where x = 0.5*seltVop*10000*1/(1024*4312.5) corresponding to an one-way physical length fraction. seltVop is read/write available via seltTestInputEntry. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltTDR1 1.3.6.1.4.1.193.72.300.20.1.4.1.44 octet string read-only
Time Domain Reflectometry (TDR) impulse diagram equivalent. Part 0. Consecutive values are spaced 1/(1024*4312.5) seconds in time. The value spacing can be interpretated in a length unit equal to [x meter], where x = 0.5*seltVop*10000*1/(1024*4312.5) corresponding to an one-way physical length fraction. seltVop is read/write available via seltTestInputEntry. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltTDR2 1.3.6.1.4.1.193.72.300.20.1.4.1.45 octet string read-only
Time Domain Reflectometry (TDR) impulse diagram equivalent. Part 0. Consecutive values are spaced 1/(1024*4312.5) seconds in time. The value spacing can be interpretated in a length unit equal to [x meter], where x = 0.5*seltVop*10000*1/(1024*4312.5) corresponding to an one-way physical length fraction. seltVop is read/write available via seltTestInputEntry. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltTDR3 1.3.6.1.4.1.193.72.300.20.1.4.1.46 octet string read-only
Time Domain Reflectometry (TDR) impulse diagram equivalent. Part 0. Consecutive values are spaced 1/(1024*4312.5) seconds in time. The value spacing can be interpretated in a length unit equal to [x meter], where x = 0.5*seltVop*10000*1/(1024*4312.5) corresponding to an one-way physical length fraction. seltVop is read/write available via seltTestInputEntry. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltTDR4 1.3.6.1.4.1.193.72.300.20.1.4.1.47 octet string read-only
Time Domain Reflectometry (TDR) impulse diagram equivalent. Part 0. Consecutive values are spaced 1/(1024*4312.5) seconds in time. The value spacing can be interpretated in a length unit equal to [x meter], where x = 0.5*seltVop*10000*1/(1024*4312.5) corresponding to an one-way physical length fraction. seltVop is read/write available via seltTestInputEntry. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltTDR5 1.3.6.1.4.1.193.72.300.20.1.4.1.48 octet string read-only
Time Domain Reflectometry (TDR) impulse diagram equivalent. Part 0. Consecutive values are spaced 1/(1024*4312.5) seconds in time. The value spacing can be interpretated in a length unit equal to [x meter], where x = 0.5*seltVop*10000*1/(1024*4312.5) corresponding to an one-way physical length fraction. seltVop is read/write available via seltTestInputEntry. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltTDR6 1.3.6.1.4.1.193.72.300.20.1.4.1.49 octet string read-only
Time Domain Reflectometry (TDR) impulse diagram equivalent. Part 0. Consecutive values are spaced 1/(1024*4312.5) seconds in time. The value spacing can be interpretated in a length unit equal to [x meter], where x = 0.5*seltVop*10000*1/(1024*4312.5) corresponding to an one-way physical length fraction. seltVop is read/write available via seltTestInputEntry. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltTDR7 1.3.6.1.4.1.193.72.300.20.1.4.1.50 octet string read-only
Time Domain Reflectometry (TDR) impulse diagram equivalent. Part 0. Consecutive values are spaced 1/(1024*4312.5) seconds in time. The value spacing can be interpretated in a length unit equal to [x meter], where x = 0.5*seltVop*10000*1/(1024*4312.5) corresponding to an one-way physical length fraction. seltVop is read/write available via seltTestInputEntry. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltInputImpedance0 1.3.6.1.4.1.193.72.300.20.1.4.1.51 octet string read-only
Estimated input impedance of the line including far-end termination. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltInputImpedance1 1.3.6.1.4.1.193.72.300.20.1.4.1.52 octet string read-only
Estimated input impedance of the line including far-end termination. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltInputImpedance2 1.3.6.1.4.1.193.72.300.20.1.4.1.53 octet string read-only
Estimated input impedance of the line including far-end termination. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
                   seltInputImpedance3 1.3.6.1.4.1.193.72.300.20.1.4.1.54 octet string read-only
Estimated input impedance of the line including far-end termination. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
           atmPvcTestInputTable 1.3.6.1.4.1.193.72.300.20.1.10 no-access
This table provides the input parameters for the ATM PVC test.
                 atmPvcTestInputEntry 1.3.6.1.4.1.193.72.300.20.1.10.1 no-access
An entry contains input parameters for the ATM PVC test for the subscriber line identified by lineIndex.
                     atmF5EndToEndLoopbackInterval 1.3.6.1.4.1.193.72.300.20.1.10.1.1 integer read-write
A number of 'ATM OAM F5 end-to-end loopback' cell(s) are sent with this interval on each PVC created for the subscriber line identified by lineIndex. The CPE must return a reply within atmF5EndToEndLoopbackTimeout seconds. The value zero indicates that this test is disabled. The first cell will be send when a non-zero value is written into this variable - or when the line is ready. If a resolution in msec is needed, use atmF5EndToEndLoopbackIntervalFine. Note: In order to restart a batch (if atmF5EndToEndBatchCount != 0) this parameter should be set to 0 and then set to the new (or possible) same interval.
                     atmF5EndToEndLoopbackTimeout 1.3.6.1.4.1.193.72.300.20.1.10.1.2 integer read-write
Specifies the the maximum amount of time to wait for F5 replies for a batch. (The batch size is set in atmF5EndToEndBatchSize)
                     atmF5EndToEndLoopbackIntervalFine 1.3.6.1.4.1.193.72.300.20.1.10.1.3 integer read-write
A number of 'ATM OAM F5 end-to-end loopback' cell(s) are sent with this interval on each PVC created for the subscriber line identified by lineIndex. The CPE must return a reply within atmF5EndToEndLoopbackTimeout seconds. The value zero indicates that this test is disabled. The first cell will be send when a non-zero value is written into this variable - or when the line is ready. This parameter follows atmF5EndToEndLoopbackInterval with a finer resolution. Note: In order to restart a batch (if atmF5EndToEndBatchCount != 0) this parameter should be set to 0 and then set to the new (or possible) same interval.
                     atmF5EndToEndBatchSize 1.3.6.1.4.1.193.72.300.20.1.10.1.5 integer read-write
Specifies how many F5 cells that is be sent in an interval given by atmF5EndToEndLoopbackIntervalFine and atmF5EndToEndLoopbackInterval.
                     atmF5EndToEndBatchCount 1.3.6.1.4.1.193.72.300.20.1.10.1.6 integer read-write
Specifies how many batches that should be run before automatically stopping the test. Eg. A BatchCount of 4 and an interval of 3 seconds would run for 12 seconds and send a total of 20 F5 cells if BatchSize equals 5. Note: A BatchCount of 0 indicates that the test should run until it is stopped by setting interval to 0.
           atmPvcTestOutputTables 1.3.6.1.4.1.193.72.300.20.1.12
                 atmPvcTestOutputTableVpiIndex 1.3.6.1.4.1.193.72.300.20.1.12.1 unsigned32 no-access
The vpi index in atmPvcTestOutputTablePvc.
                 atmPvcTestOutputTableVciIndex 1.3.6.1.4.1.193.72.300.20.1.12.2 unsigned32 no-access
The vci index in atmPvcTestOutputTablePvc.
                 atmPvcTestOutputTableLine 1.3.6.1.4.1.193.72.300.20.1.12.4 no-access
This table provides the output parameters for the ATM PVC test (per line parameters).
                     atmPvcTestOutputEntryLine 1.3.6.1.4.1.193.72.300.20.1.12.4.1 no-access
An entry contains output parameters for the ATM PVC test for the subscriber line identified by lineIndex.
                         atmF5EndToEndBatchesLeft 1.3.6.1.4.1.193.72.300.20.1.12.4.1.1 counter32 read-only
If batches are used (defined with atmF5EndToEndBatchCount != 0) This counter states how many batches are left before all batches have been run.
                 atmPvcTestOutputTablePvc 1.3.6.1.4.1.193.72.300.20.1.12.6 no-access
This table provides the output parameters for the ATM PVC test (per pvc parameters).
                     atmPvcTestOutputEntryPvc 1.3.6.1.4.1.193.72.300.20.1.12.6.1 no-access
An entry contains output parameters for the ATM PVC test for the subscriber PVC identified by lineIndex, atmPvcTestOutputTableVpiIndex, and atmPvcTestOutputTableVciIndex.
                         atmF5EndToEndTransmitted 1.3.6.1.4.1.193.72.300.20.1.12.6.1.1 counter32 read-only
Number of F5 cells transmitted on the PVC since the test was started with atmF5EndToEndLoopbackIntervalFine or atmF5EndToEndLoopbackInterval.
                         atmF5EndToEndReceived 1.3.6.1.4.1.193.72.300.20.1.12.6.1.2 counter32 read-only
Number of F5 cells received on the PVC since the test was started with atmF5EndToEndLoopbackIntervalFine or atmF5EndToEndLoopbackInterval. Note: F5 cells from a previous batch that are received are droped and are not counted here. (ie. very late answers arriving later than atmF5EndToEndLoopbackInterval(Fine) or atmF5EndToEndLoopbackTimeout - whichever are smallest - after transmission of the requests)
           pppoeTestInputTable 1.3.6.1.4.1.193.72.300.20.1.20 no-access
This table provides the input parameters for the 'PPP-over-Ethernet' test. Note: This OID has to be specified in 'adslIfTestType' in order to activate the test. The test is a PADI packet broadcasted on the Ethernet (through the Bridge/Filter for this line). The test succeds when at least one 'Access Concentrator' server replies with a PADO packet. See description of result in pppoeTestOutputTable. The returned AC-Name & Service-Names from each PADO packet will be stored in pppoeTestOutputTable. Abbreviations: - PADI: PPPoE Active Discovery Initiation - PADO: PPPoE Active Discovery Offer - AC-Name: Access Concentrator Name See also: 'peaIfIpDslam.adslIffObjects.adslIfTestTable.adslIfTestEntry.adslIfTestType'
                 pppoeTestInputEntry 1.3.6.1.4.1.193.72.300.20.1.20.1 no-access
An entry contains input parameters for the 'PPP-over-Ethernet' test for the subscriber line identified by lineIndex. See also summary in pppoeTestInputTable.
                     pppoeServiceRequested 1.3.6.1.4.1.193.72.300.20.1.20.1.1 displaystring read-write
The ServiceName used in the PADI packets (PPPoE Active Discovery Initiation) during PPPoE tests (default empty).
                     pppoeVlanId 1.3.6.1.4.1.193.72.300.20.1.20.1.2 integer read-write
This is the VLANID used for the pppoeTest (accordingly to 802.1Q). The VLANID must have been configured for this line in the pvcTable. See also 'peaBridgeIpDslam.pvcTable.pvcEntry.pvcStatus.vlanID'
                     pppoeTimeout 1.3.6.1.4.1.193.72.300.20.1.20.1.3 integer read-write
Specifies the the maximum amount of time to wait from the PADI packet is broadcasted until all replies (PADI packets) must have arrived.
                     pppoeInnerVlanId 1.3.6.1.4.1.193.72.300.20.1.20.1.4 integer read-write
This is the InnerVlanId used for the pppoeTest (accordingly to 802.1Q). This object is valid only if vlanTagType value is QinQ (Double Vlan). The innerVlanId must have been configured for this line in the pvcTable. See also 'peaBridgeIpDslam.pvcTable.pvcEntry.pvcStatus.innerVlanId'
           pppoeTestOutputTable 1.3.6.1.4.1.193.72.300.20.1.21 no-access
This table provides the **additional** output parameters for the 'PPP-over-Ethernet' test. The test result can be read in the generic 'adslIfTestResult' variable, which can have the following values: - InProgress - UnableToRun, details in adslIfTestError: +- lanError: The specified VLAN-id is not used by any ATM PVCs that belongs to specified line (or line down). +- configurationOrCustomisationError: Bridge does now allow PPPoE frames for the PVC with specified VLAN-id. +- softwareError: Internal error. - TestFailed, details in adslIfTestError: +- timeoutExpired: No PADO reply received See also: 'peaIfIpDslam.adslIfObjects.adslIfTestTable'
                 pppoeTestOutputEntry 1.3.6.1.4.1.193.72.300.20.1.21.1 no-access
An entry contains **additional** output parameters for the 'PPP-over-Ethernet' test for the subscriber line identified by lineIndex. Zero or more entries may exists for each line.
                     pppoeAccessConcentrator 1.3.6.1.4.1.193.72.300.20.1.21.1.1 displaystring read-only
The name of the Access Concentrator reported in a PADO packet.
                     pppoeServiceOffered 1.3.6.1.4.1.193.72.300.20.1.21.1.2 displaystring read-only
The name of a Service reported in a PADO packet from the Access Concentrator.
                     resultIndex 1.3.6.1.4.1.193.72.300.20.1.21.1.3 unsigned32 no-access
Indicates the entry number for a line.
           loopDiagResultTable 1.3.6.1.4.1.193.72.300.20.1.23 no-access
This table provides the per line results of the ADSL2 Loop Diagnostics.
                 loopDiagResultEntry 1.3.6.1.4.1.193.72.300.20.1.23.1 no-access
An entry contains the per line results of the ADSL2 Loop Diagnostics for the subscriber line identified by lineIndex.
                     loopDiagStatus 1.3.6.1.4.1.193.72.300.20.1.23.1.1 integer read-only
Status of current Loop Diagnostics. NOTE that Loop Diagnostics data are only valid in case of status LoopDiagSuccess. Enumeration: 'loopDiagSuccess': 3, 'loopDiagNotStarted': 0, 'loopDiagMeasOk': 2, 'loopDiagFailed': 4, 'loopDiagInProgress': 1.
                     loopDiagAttainableBitRateNE 1.3.6.1.4.1.193.72.300.20.1.23.1.2 unsigned32 read-only
Near-end attainable bit rate in bit per second (bps). Compliant to G.997.1: 7.5.1.13 (ATTNDRus).
                     loopDiagLoopAttenuationNE 1.3.6.1.4.1.193.72.300.20.1.23.1.3 unsigned32 read-only
Near-end loop attenuation. Range is [1023..0], unit is 0.1 dB. LoopAttenuation = 1023 is a special value indicating that the loop attenuation is outside the represented range. Compliant to G.997.1: 7.5.1.7 (LATNus).
                     loopDiagSignalAttenuationNE 1.3.6.1.4.1.193.72.300.20.1.23.1.4 unsigned32 read-only
Near-end signal attenuation. Range is [1023..0], unit is 0.1 dB. SignalAttenuation = 1023 is a special value indicating that the attenuation is outside the represented range. Compliant to G.997.1: 7.5.1.9 (SATNus).
                     loopDiagSnrMarginNE 1.3.6.1.4.1.193.72.300.20.1.23.1.5 integer32 read-only
Near-end signal-to-noise ratio margin. Range is [511..-512], unit is 0.1 dB. snrMargin = -512 is a special value indicating that the signal-to-noise ratio margin is outside the represented range. Compliant to G.997.1: 7.5.1.11 (SNRMus).
                     loopDiagActualTxPowerFarEndNE 1.3.6.1.4.1.193.72.300.20.1.23.1.6 integer32 read-only
The far-end actual aggregate transmit power as determined by the near-end receive PMD function. Range is [511..-512], unit is 0.1 dBm. actualTxPowerFE = -512 is a special value indicating that the actual aggregate transmit power is outside the represented range. Compliant to G.997.1: 7.5.1.17 (ACTATPus).
                     loopDiagAttainableBitRateFE 1.3.6.1.4.1.193.72.300.20.1.23.1.7 unsigned32 read-only
Far-end attainable bit rate in bit per second (bps). Compliant to G.997.1: 7.5.1.12 (ATTNDRds).
                     loopDiagLoopAttenuationFE 1.3.6.1.4.1.193.72.300.20.1.23.1.8 unsigned32 read-only
Far-end loop attenuation. Range is [1023..0], unit is 0.1 dB. LoopAttenuation = 1023 is a special value indicating that the attenuation is outside the represented range. Compliant to G.997.1: 7.5.1.6 (LATNds).
                     loopDiagSignalAttenuationFE 1.3.6.1.4.1.193.72.300.20.1.23.1.9 unsigned32 read-only
Far-end signal attenuation. Range is [1023..0], unit is 0.1 dB. SignalAttenuation = 1023 is a special value indicating that the attenuation is outside the represented range. Compliant to G.997.1: 7.5.1.8 (SATNds).
                     loopDiagSnrMarginFE 1.3.6.1.4.1.193.72.300.20.1.23.1.10 integer32 read-only
Far-end signal-to-noise ratio margin. Range is [511..-512], unit is 0.1 dB. SnrMargin = -512 is a special value indicating that the signal-to-noise ratio margin is outside the represented range. Compliant to G.997.1: 7.5.1.10 (SNRMds).
                     loopDiagActualTxPowerFarEndFE 1.3.6.1.4.1.193.72.300.20.1.23.1.11 integer32 read-only
The near-end actual aggregate transmit power as determined by the far-end receive PMD function. Range is [511..-512], unit is 0.1 dBm. ActualTxPowerFE = -512 is a special value indicating that the actual aggregate transmit power is outside the represented range. Compliant to G.997.1: 7.5.1.16 (ACTATPds).
           loopDiagHlinNeTable 1.3.6.1.4.1.193.72.300.20.1.24 no-access
This table provides the per subcarrier Hlin results of the ADSL2 Loop Diagnostics. The linear complex channel transfer function values for the tone range specified by the partId. Hlin is calculated from the given values as follows: Hlin[i] = (HlinScale/215)*(Hlin[i].real + j*Hlin[i].imag)/215) Compliant to G.997.1: 7.5.1.18.5 (HLINSCus) and 7.5.1.18.6 (HLINpsus).
                 loopDiagHlinNeEntry 1.3.6.1.4.1.193.72.300.20.1.24.1 no-access
An entry contains the per subcarrier Hlin results of the ADSL2 Loop Diagnostics for the subscriber line identified by lineIndex. NOTE Low designates the first 32 tones and High is the upper 32 tones for that particular partId.
                     loopDiagHlinNeScale 1.3.6.1.4.1.193.72.300.20.1.24.1.1 unsigned32 read-only
Scale factor for the normalized complex numbers Hlin.
                     loopDiagHlinNeLow 1.3.6.1.4.1.193.72.300.20.1.24.1.2 octet string read-only
The linear complex channel transfer function values for the tone range specified by the partId. Bytes n*4 + [0..1]: Real part (int16) Bytes n*4 + [2..3]: Imaginary part (int16) real[n] = imag[n] = -32768 indicates no measurement.
                     loopDiagHlinNeHigh 1.3.6.1.4.1.193.72.300.20.1.24.1.3 octet string read-only
The linear complex channel transfer function values for the tone range specified by the partId. Bytes n*4 + [0..1]: Real part (int16) Bytes n*4 + [2..3]: Imaginary part (int16) real[n] = imag[n] = -32768 indicates no measurement.
           loopDiagHlinFeTable 1.3.6.1.4.1.193.72.300.20.1.25 no-access
This table provides the per subcarrier Hlin results of the ADSL2 Loop Diagnostics. The linear complex channel transfer function values for the tone range specified by the partId. Hlin is calculated from the given values as follows: Hlin[i] = (HlinScale/2^15)*(Hlin[i].real + j*Hlin[i].imag)/2^15) Compliant to G.997.1: 7.5.1.18.1 (HLINSCds) and 7.5.1.18.2 (HLINpsds).
                 loopDiagHlinFeEntry 1.3.6.1.4.1.193.72.300.20.1.25.1 no-access
An entry contains the per subcarrier Hlin results of the ADSL2 Loop Diagnostics for the subscriber line identified by lineIndex. NOTE: The partId specifies the section of the Hlin table to return. The Hlin values returned correspond to tones: partId * 64 to (partId * 64 + 63). PartId range is [0..7]. Low designates the first 32 tones and High is the upper 32 tones for that particular partId.
                     loopDiagHlinFeScalePart0 1.3.6.1.4.1.193.72.300.20.1.25.1.1 unsigned32 read-only
Scale factor for the normalized complex numbers Hlin.
                     loopDiagHlinFeScalePart1 1.3.6.1.4.1.193.72.300.20.1.25.1.2 unsigned32 read-only
Scale factor for the normalized complex numbers Hlin.
                     loopDiagHlinFeScalePart2 1.3.6.1.4.1.193.72.300.20.1.25.1.3 unsigned32 read-only
Scale factor for the normalized complex numbers Hlin.
                     loopDiagHlinFeScalePart3 1.3.6.1.4.1.193.72.300.20.1.25.1.4 unsigned32 read-only
Scale factor for the normalized complex numbers Hlin.
                     loopDiagHlinFeScalePart4 1.3.6.1.4.1.193.72.300.20.1.25.1.5 unsigned32 read-only
Scale factor for the normalized complex numbers Hlin.
                     loopDiagHlinFeScalePart5 1.3.6.1.4.1.193.72.300.20.1.25.1.6 unsigned32 read-only
Scale factor for the normalized complex numbers Hlin.
                     loopDiagHlinFeScalePart6 1.3.6.1.4.1.193.72.300.20.1.25.1.7 unsigned32 read-only
Scale factor for the normalized complex numbers Hlin.
                     loopDiagHlinFeScalePart7 1.3.6.1.4.1.193.72.300.20.1.25.1.8 unsigned32 read-only
Scale factor for the normalized complex numbers Hlin.
                     loopDiagHlinFePart0Low 1.3.6.1.4.1.193.72.300.20.1.25.1.9 octet string read-only
The linear complex channel transfer function values for the tone range specified by the partId. Range is [32767..-32768]. Bytes n*4 + [0..1]: Real part(n) (int16) Bytes n*4 + [2..3]: Imaginary part(n) (int16) real[n] = imag[n] = -32768 indicates no measurement.
                     loopDiagHlinFePart0High 1.3.6.1.4.1.193.72.300.20.1.25.1.10 octet string read-only
The linear complex channel transfer function values for the tone range specified by the partId. Range is [32767..-32768]. Bytes n*4 + [0..1]: Real part(n) (int16) Bytes n*4 + [2..3]: Imaginary part(n) (int16) real[n] = imag[n] = -32768 indicates no measurement.
                     loopDiagHlinFePart1Low 1.3.6.1.4.1.193.72.300.20.1.25.1.11 octet string read-only
The linear complex channel transfer function values for the tone range specified by the partId. Range is [32767..-32768]. Bytes n*4 + [0..1]: Real part(n) (int16) Bytes n*4 + [2..3]: Imaginary part(n) (int16) real[n] = imag[n] = -32768 indicates no measurement.
                     loopDiagHlinFePart1High 1.3.6.1.4.1.193.72.300.20.1.25.1.12 octet string read-only
The linear complex channel transfer function values for the tone range specified by the partId. Range is [32767..-32768]. Bytes n*4 + [0..1]: Real part(n) (int16) Bytes n*4 + [2..3]: Imaginary part(n) (int16) real[n] = imag[n] = -32768 indicates no measurement.
                     loopDiagHlinFePart2Low 1.3.6.1.4.1.193.72.300.20.1.25.1.13 octet string read-only
The linear complex channel transfer function values for the tone range specified by the partId. Range is [32767..-32768]. Bytes n*4 + [0..1]: Real part(n) (int16) Bytes n*4 + [2..3]: Imaginary part(n) (int16) real[n] = imag[n] = -32768 indicates no measurement.
                     loopDiagHlinFePart2High 1.3.6.1.4.1.193.72.300.20.1.25.1.14 octet string read-only
The linear complex channel transfer function values for the tone range specified by the partId. Range is [32767..-32768]. Bytes n*4 + [0..1]: Real part(n) (int16) Bytes n*4 + [2..3]: Imaginary part(n) (int16) real[n] = imag[n] = -32768 indicates no measurement.
                     loopDiagHlinFePart3Low 1.3.6.1.4.1.193.72.300.20.1.25.1.15 octet string read-only
The linear complex channel transfer function values for the tone range specified by the partId. Range is [32767..-32768]. Bytes n*4 + [0..1]: Real part(n) (int16) Bytes n*4 + [2..3]: Imaginary part(n) (int16) real[n] = imag[n] = -32768 indicates no measurement.
                     loopDiagHlinFePart3High 1.3.6.1.4.1.193.72.300.20.1.25.1.16 octet string read-only
The linear complex channel transfer function values for the tone range specified by the partId. Range is [32767..-32768]. Bytes n*4 + [0..1]: Real part(n) (int16) Bytes n*4 + [2..3]: Imaginary part(n) (int16) real[n] = imag[n] = -32768 indicates no measurement.
                     loopDiagHlinFePart4Low 1.3.6.1.4.1.193.72.300.20.1.25.1.17 octet string read-only
The linear complex channel transfer function values for the tone range specified by the partId. Range is [32767..-32768]. Bytes n*4 + [0..1]: Real part(n) (int16) Bytes n*4 + [2..3]: Imaginary part(n) (int16) real[n] = imag[n] = -32768 indicates no measurement.
                     loopDiagHlinFePart4High 1.3.6.1.4.1.193.72.300.20.1.25.1.18 octet string read-only
The linear complex channel transfer function values for the tone range specified by the partId. Range is [32767..-32768]. Bytes n*4 + [0..1]: Real part(n) (int16) Bytes n*4 + [2..3]: Imaginary part(n) (int16) real[n] = imag[n] = -32768 indicates no measurement.
                     loopDiagHlinFePart5Low 1.3.6.1.4.1.193.72.300.20.1.25.1.19 octet string read-only
The linear complex channel transfer function values for the tone range specified by the partId. Range is [32767..-32768]. Bytes n*4 + [0..1]: Real part(n) (int16) Bytes n*4 + [2..3]: Imaginary part(n) (int16) real[n] = imag[n] = -32768 indicates no measurement.
                     loopDiagHlinFePart5High 1.3.6.1.4.1.193.72.300.20.1.25.1.20 octet string read-only
The linear complex channel transfer function values for the tone range specified by the partId. Range is [32767..-32768]. Bytes n*4 + [0..1]: Real part(n) (int16) Bytes n*4 + [2..3]: Imaginary part(n) (int16) real[n] = imag[n] = -32768 indicates no measurement.
                     loopDiagHlinFePart6Low 1.3.6.1.4.1.193.72.300.20.1.25.1.21 octet string read-only
The linear complex channel transfer function values for the tone range specified by the partId. Range is [32767..-32768]. Bytes n*4 + [0..1]: Real part(n) (int16) Bytes n*4 + [2..3]: Imaginary part(n) (int16) real[n] = imag[n] = -32768 indicates no measurement.
                     loopDiagHlinFePart6High 1.3.6.1.4.1.193.72.300.20.1.25.1.22 octet string read-only
The linear complex channel transfer function values for the tone range specified by the partId. Range is [32767..-32768]. Bytes n*4 + [0..1]: Real part(n) (int16) Bytes n*4 + [2..3]: Imaginary part(n) (int16) real[n] = imag[n] = -32768 indicates no measurement.
                     loopDiagHlinFePart7Low 1.3.6.1.4.1.193.72.300.20.1.25.1.23 octet string read-only
The linear complex channel transfer function values for the tone range specified by the partId. Range is [32767..-32768]. Bytes n*4 + [0..1]: Real part(n) (int16) Bytes n*4 + [2..3]: Imaginary part(n) (int16) real[n] = imag[n] = -32768 indicates no measurement.
                     loopDiagHlinFePart7High 1.3.6.1.4.1.193.72.300.20.1.25.1.24 octet string read-only
The linear complex channel transfer function values for the tone range specified by the partId. Range is [32767..-32768]. Bytes n*4 + [0..1]: Real part(n) (int16) Bytes n*4 + [2..3]: Imaginary part(n) (int16) real[n] = imag[n] = -32768 indicates no measurement.
           loopDiagHlogTable 1.3.6.1.4.1.193.72.300.20.1.26 no-access
This table provides the per subcarrier Hlog results of the ADSL2 Loop Diagnostics. Hlog is calculated from the given values, as follows: Hlog[i] = 6 - hlogNE(i)/10(dB) and Hlog[i] = 6 - hlogFE(i)/10(dB) Compliant to G.997.1: 7.5.1.18.4 (HLOGpsds) and 7.5.1.18.8 (HLOGpsus)
                 loopDiagHlogEntry 1.3.6.1.4.1.193.72.300.20.1.26.1 no-access
An entry contains the per subcarrier Hlog results of the ADSL2 Loop Diagnostics for the subscriber line identified by lineIndex. NOTE: The partId specifies the section of the far-end (US) Hlog table to return. The hlog values returned correspond to tones partId * 128 to (partId * 128 + 127). PartId range is [3..0]. Low designates the first 64 tones and High is the upper 64 tones for that particular partId.
                     loopDiagHlogNE 1.3.6.1.4.1.193.72.300.20.1.26.1.1 octet string read-only
The near-end logarithmic scale channel transfer function magnitudes. Range is [1023..0]. The value 1023 indicates no measurement available. Bytes n*2 + [0..1]: Hlog(n) (uint16)
                     loopDiagHlogFEPart0Low 1.3.6.1.4.1.193.72.300.20.1.26.1.2 octet string read-only
The far-end logarithmic scale channel transfer function magnitudes. Range is [1023..0]. The value 1023 indicates no measurement available. Bytes n*2 + [0..1]: Hlog(n) (uint16)
                     loopDiagHlogFEPart0High 1.3.6.1.4.1.193.72.300.20.1.26.1.3 octet string read-only
The far-end logarithmic scale channel transfer function magnitudes. Range is [1023..0]. The value 1023 indicates no measurement available. Bytes n*2 + [0..1]: Hlog(n) (uint16)
                     loopDiagHlogFEPart1Low 1.3.6.1.4.1.193.72.300.20.1.26.1.4 octet string read-only
The far-end logarithmic scale channel transfer function magnitudes. Range is [1023..0]. The value 1023 indicates no measurement available. Bytes n*2 + [0..1]: Hlog(n) (uint16)
                     loopDiagHlogFEPart1High 1.3.6.1.4.1.193.72.300.20.1.26.1.5 octet string read-only
The far-end logarithmic scale channel transfer function magnitudes. Range is [1023..0]. The value 1023 indicates no measurement available. Bytes n*2 + [0..1]: Hlog(n) (uint16)
                     loopDiagHlogFEPart2Low 1.3.6.1.4.1.193.72.300.20.1.26.1.6 octet string read-only
The far-end logarithmic scale channel transfer function magnitudes. Range is [1023..0]. The value 1023 indicates no measurement available. Bytes n*2 + [0..1]: Hlog(n) (uint16)
                     loopDiagHlogFEPart2High 1.3.6.1.4.1.193.72.300.20.1.26.1.7 octet string read-only
The far-end logarithmic scale channel transfer function magnitudes. Range is [1023..0]. The value 1023 indicates no measurement available. Bytes n*2 + [0..1]: Hlog(n) (uint16)
                     loopDiagHlogFEPart3Low 1.3.6.1.4.1.193.72.300.20.1.26.1.8 octet string read-only
The far-end logarithmic scale channel transfer function magnitudes. Range is [1023..0]. The value 1023 indicates no measurement available. Bytes n*2 + [0..1]: Hlog(n) (uint16)
                     loopDiagHlogFEPart3High 1.3.6.1.4.1.193.72.300.20.1.26.1.9 octet string read-only
The far-end logarithmic scale channel transfer function magnitudes. Range is [1023..0]. The value 1023 indicates no measurement available. Bytes n*2 + [0..1]: Hlog(n) (uint16)
           loopDiagQlnTable 1.3.6.1.4.1.193.72.300.20.1.27 no-access
This table provides the per subcarrier Qln results of the ADSL2 Loop Diagnostics. QLN is calculated from the given values as follows: QLN[i] = -23 - (n[i]/2)(dBm/Hz), where n designates the QlnNE and QlnFE respectively. Compliant to G.997.1: 7.5.1.19.2 (QLNpsds) and 7.5.1.19.4 (QLNpsus)
                 loopDiagQlnEntry 1.3.6.1.4.1.193.72.300.20.1.27.1 no-access
An entry contains the per subcarrier Qln results of the ADSL2 Loop Diagnostics for the subscriber line identified by lineIndex. NOTE: The partId specifies the section of the far-end (US) QLN table to return. The QLN values returned correspond to tones partId * 256 to (partId * 256 + 255). PartId range is [1..0]. Low designates the first 128 tones and High is the upper 128 tones for that particular partId.
                     loopDiagQlnNE 1.3.6.1.4.1.193.72.300.20.1.27.1.1 octet string read-only
The near-end quiet line noise PSD. Range is [255..0]. The value 255 indicates no measurement available.
                     loopDiagQlnFEPart0Low 1.3.6.1.4.1.193.72.300.20.1.27.1.2 octet string read-only
The far-end quiet line noise PSD. Range is [255..0]. The value 255 indicates no measurement available.
                     loopDiagQlnFEPart0High 1.3.6.1.4.1.193.72.300.20.1.27.1.3 octet string read-only
The far-end quiet line noise PSD. Range is [255..0]. The value 255 indicates no measurement available.
                     loopDiagQlnFEPart1Low 1.3.6.1.4.1.193.72.300.20.1.27.1.4 octet string read-only
The far-end quiet line noise PSD. Range is [255..0]. The value 255 indicates no measurement available.
                     loopDiagQlnFEPart1High 1.3.6.1.4.1.193.72.300.20.1.27.1.5 octet string read-only
The far-end quiet line noise PSD. Range is [255..0]. The value 255 indicates no measurement available.
           loopDiagSnrTable 1.3.6.1.4.1.193.72.300.20.1.28 no-access
This table provides the per subcarrier Snr results of the ADSL2 Loop Diagnostics. SNR is calculated from the given values as follows: SNR[i] = -32 + (n[i]/2)(dB) where n designates the SnrNE and SnrFE respectively. Compliant to G.997.1: 7.5.1.20.2 (SNRpsds) and 7.5.1.20.4 (SNRpsus)
                 loopDiagSnrEntry 1.3.6.1.4.1.193.72.300.20.1.28.1 no-access
An entry contains the per subcarrier Snr results of the ADSL2 Loop Diagnostics for the subscriber line identified by lineIndex. NOTE: The partId specifies the section of the far-end (US) SNR table to return. The SNR values returned correspond to tones partId * 256 to (partId * 256 + 255). PartId range is [0..1]. Low designates the first 128 tones and High is the upper 128 tones for that particular partId.
                     loopDiagSnrNE 1.3.6.1.4.1.193.72.300.20.1.28.1.1 octet string read-only
The near-end signal-to-noise ratio. Range is [255..0]. The value 255 indicates no measurement available.
                     loopDiagSnrFEPart0Low 1.3.6.1.4.1.193.72.300.20.1.28.1.2 octet string read-only
The far-end signal-to-noise ratio. Range is [255..0]. The value 255 indicates no measurement available.
                     loopDiagSnrFEPart0High 1.3.6.1.4.1.193.72.300.20.1.28.1.3 octet string read-only
The far-end signal-to-noise ratio. Range is [255..0]. The value 255 indicates no measurement available.
                     loopDiagSnrFEPart1Low 1.3.6.1.4.1.193.72.300.20.1.28.1.4 octet string read-only
The far-end signal-to-noise ratio. Range is [255..0]. The value 255 indicates no measurement available.
                     loopDiagSnrFEPart1High 1.3.6.1.4.1.193.72.300.20.1.28.1.5 octet string read-only
The far-end signal-to-noise ratio. Range is [255..0]. The value 255 indicates no measurement available.
       peaTestIpDslamTraps 1.3.6.1.4.1.193.72.300.20.2
           peaTestIpDslamTrapsEntry 1.3.6.1.4.1.193.72.300.20.2.0
               ifTestCompletion 1.3.6.1.4.1.193.72.300.20.2.0.1
Indicates that the test is ready. Valid from: EDA 1.1R2A Parameters 1: Managed object class IP DSLAM Port 2: Managed object ID (MAC + PortNo) 3: Sequence number (Alarm sequence number) 4: Perceived severity Warning 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type Equipment 7: Probable cause Other 8: Test Result (Success, NotSupported, UnableToRun, Aborted or Failed) 9: Test Type (Type of the test performed) 10: Test Error (Probable cause value)
       peaTestIpDslamObjectsGroups 1.3.6.1.4.1.193.72.300.20.3
           peaTestIpDslamObjectsGroup 1.3.6.1.4.1.193.72.300.20.3.1
Objects for the fssServiceLine Group
       peaTestIpDslamTrapsGroups 1.3.6.1.4.1.193.72.300.20.4
           peaTestIpDslamTrapsGroup 1.3.6.1.4.1.193.72.300.20.4.2
Deprecated Notifications Group