PEA-LINE-MIRRORING-IPDSLAM: View SNMP OID List / Download MIB

VENDOR: ERICSSON AB


 Home MIB: PEA-LINE-MIRRORING-IPDSLAM
Download as:   
SNMPv2-CONF, SNMPv2-SMI, DIESEL-SMI, SNMPv2-TC, PEA-BRIDGE-IPDSLAM

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 peaLineMirroringIpDslam 1.3.6.1.4.1.193.72.300.90
This MIB is used to configure end-user line mirroring in the IP DSLAM. When upstream and downstream traffic mirroring is enabled, all traffic from an end-user line is replicated, tagged with an operator specified VLAN tag and sent on the IP DSLAM's uplink interface, as illustrated below. IP DSLAM _____________________________________ | | | Service VLAN | | -------------------------->-------->|----------> End-user uplink |/ ) | <-------->| / | |\ Downstream Mirror VLAN / | | \<------------------------ | |_____________________________________| IP DSLAM _____________________________________ | | | Service VLAN | | <-----------------------------<-----|<---------- End-user uplink |/ / | <-------->| / | |\ Upstream Mirror VLAN / | | \<------------------------ | |_____________________________________| Different VLANs can be used for upstream and downstream traffic mirroring, but the same VLAN may be used for both traffic directions. It is also possible to only mirror traffic in one direction, or to start mirroring on more than one line. The traffic mirroring function will not interfere with the normal services as long as the VLAN used for traffic mirroring is not used for services. If a mirror VLAN collides with a service VLAN, the behavior is undefined.
       lineMirroringTable 1.3.6.1.4.1.193.72.300.90.5 no-access
The lineMirroringTable is used to configure traffic mirroring for the end-user lines in the IP DSLAM.
           lineMirroringEntry 1.3.6.1.4.1.193.72.300.90.5.5 no-access
lineMirroringEntry is an entry in the lineMirroringTable. A lineMirroringEntry is used to configure line mirroring for one line in the IP DSLAM. The line to configure is identified by lineIndex.
               upstreamLineMirrorVlanId 1.3.6.1.4.1.193.72.300.90.5.5.5 unsigned32 read-write
The parameter upstreamLineMirrorVlanId is used to enable/disable mirroring of all upstream traffic on the specific line. When mirroring is enabled, upstream traffic from all PVC's in the line is replicated (before service VLAN tag is added) and tagged with the VLAN specified with upstreamLineMirrorVlanId. The traffic is then forwarded on the uplink interface of the IP DSLAM. To enable upstream traffic mirroring for a line, set upstreamLineMirrorVlanId to a value in the range 0x0000..0x0FFF, to disable upstream traffic mirroring set upstreamLineMirrorVlanId to 0xFFFF. The value configured with upstreamLineMirrorVlanId will survive a restart of the IP DSLAM.
               upstreamLineMirrorVlanPriority 1.3.6.1.4.1.193.72.300.90.5.5.10 unsigned32 read-write
The parameter upstreamLineMirrorVlanPriority is used in conjunction with upstreamLineMirrorVlanId when upstream traffic mirroring is enabled. upstreamLineMirrorVlanPriority specifies the VLAN priority used when sending the mirrored traffic on the IP DSLAM uplink interface. The value configured with upstreamLineMirrorVlanPriority will survive a restart of the IP DSLAM.
               downstreamLineMirrorVlanId 1.3.6.1.4.1.193.72.300.90.5.5.15 unsigned32 read-write
The parameter downstreamLineMirrorVlanId is used to enable/disable mirroring of all downstream traffic on the specific line. When mirroring is enabled, downstream traffic to all PVC's in the line is replicated (after service VLAN tag is removed) and tagged with the VLAN specified with downstreamLineMirrorVlanId. The traffic is then forwarded on the uplink interface of the IP DSLAM. To enable downstream traffic mirroring for a line, set downstreamLineMirrorVlanId to a value in the range 0x0000..0x0FFF, to disable upstream traffic mirroring, set downstreamLineMirrorVlanId to 0xFFFF. The value configured with downstreamLineMirrorVlanId will survive a restart of the IP DSLAM.
               downstreamLineMirrorVlanPriority 1.3.6.1.4.1.193.72.300.90.5.5.20 unsigned32 read-write
The parameter downstreamLineMirrorVlanPriority is used in conjunction with downstreamLineMirrorVlanId when upstream traffic mirroring is enabled. downstreamLineMirrorVlanPriority specifies the VLAN priority used when sending the mirrored traffic on the IP DSLAM uplink interface. The value configured with downstreamLineMirrorVlanPriority will survive a restart of the IP DSLAM.