PDUSNMP: View SNMP OID List / Download MIB
VENDOR: DESIGNER SYSTEMS
Home | MIB: PDUSNMP | |||
---|---|---|---|---|
Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
Object Name | OID | Type | Access | Info |
ipt_pdu_SNMP | 1.3.6.1.4.1.38218 | |||
pdu_SNMP | 1.3.6.1.4.1.38218.1 |
IPT SNMP PDU MIB definition |
||
slave_SiteTotals | 1.3.6.1.4.1.38218.1.1 | |||
slave_SiteTotalkWh | 1.3.6.1.4.1.38218.1.1.1 | integer32 | read-only |
Total Energy used by all slaves on site in kWh x10. |
slave_SiteTotalBtu | 1.3.6.1.4.1.38218.1.1.2 | integer32 | read-only |
Total Energy used by all slaves on site in Btu x10. |
slave_SiteTotalKgCO2 | 1.3.6.1.4.1.38218.1.1.3 | integer32 | read-only |
Total Energy used by all slaves on site in KgCO2 x10. |
slave_Server | 1.3.6.1.4.1.38218.1.2 | |||
slave_Nopdus | 1.3.6.1.4.1.38218.1.2.1 | integer | read-only |
Compatible - Number of pdu's connected in SLAVE mode |
slaves_Online | 1.3.6.1.4.1.38218.1.2.2 | integer | read-only |
Compatible - Number of pdu's ONLINE in SLAVE mode. |
slave_ServerStatus | 1.3.6.1.4.1.38218.1.2.3 | integer | read-only |
Compatible - Server status Enumeration: 'running': 1, 'stopped': 0, 'searching': 2, 'listening': 4, 'getinfo': 3. |
pdu_Configuration | 1.3.6.1.4.1.38218.1.3 | |||
pdu_ClientName | 1.3.6.1.4.1.38218.1.3.1 | displaystring | read-write |
Compatible - pdu Client name. |
pdu_LocationName | 1.3.6.1.4.1.38218.1.3.2 | displaystring | read-write |
Compatible - pdu Location Name. |
pdu_FirmwareVersion | 1.3.6.1.4.1.38218.1.3.3 | displaystring | read-only |
Compatible - pdu firmware version. |
pdu_KgCO2Conversion | 1.3.6.1.4.1.38218.1.3.4 | integer | read-write |
Compatible - KgCO2 conversion factor x1000 [544 = 0.544] |
pdu_MODBUSTimeout | 1.3.6.1.4.1.38218.1.3.5 | integer | read-write |
Compatible - MODBUS Timeout in mS. |
pdu_MODBUSRetry | 1.3.6.1.4.1.38218.1.3.6 | integer | read-write |
Compatible - MODBUS Retry value. |
pdu_NotUsed1 | 1.3.6.1.4.1.38218.1.3.7 | integer | read-only |
Compatible - Not used. |
pdu_AlarmPeriod | 1.3.6.1.4.1.38218.1.3.8 | integer | read-write |
Compatible - Alarm period check in minutes. |
pdu_DHCPStatus | 1.3.6.1.4.1.38218.1.3.9 | integer | read-write |
Compatible - DHCP Enable.Set to 1 to ENABLE or 0 to DISABLE DHCP support. Enumeration: 'disabled': 0, 'enabled': 1. |
pdu_IPAddress | 1.3.6.1.4.1.38218.1.3.10 | ipaddress | read-write |
Compatible - pdu IP Address. |
pdu_SubNetMask | 1.3.6.1.4.1.38218.1.3.11 | ipaddress | read-write |
Compatible - pdu Sub-net mask. |
pdu_CabinetID | 1.3.6.1.4.1.38218.1.3.12 | displaystring | read-write |
pdu Cabinet ID. |
pdu_socketPeriod | 1.3.6.1.4.1.38218.1.3.13 | integer | read-write |
pdu socket ON sequence period (mS) 0=OFF. |
pdu_LockPeriod | 1.3.6.1.4.1.38218.1.3.14 | integer | read-write |
pdu Lock activation period (S). |
pdu_RTC_Hour | 1.3.6.1.4.1.38218.1.3.15 | integer | read-write |
pdu RTC Hour [24 hour clock]. |
pdu_RTC_Minute | 1.3.6.1.4.1.38218.1.3.16 | integer | read-write |
pdu RTC Minute. |
pdu_RTC_Date | 1.3.6.1.4.1.38218.1.3.17 | integer | read-write |
pdu RTC Date. |
pdu_RTC_Month | 1.3.6.1.4.1.38218.1.3.18 | integer | read-write |
pdu RTC Month. |
pdu_RTC_Year | 1.3.6.1.4.1.38218.1.3.19 | integer | read-write |
pdu RTC Year [tens only]. |
trap_Destinations | 1.3.6.1.4.1.38218.1.4 | |||
trapDestinationsTable | 1.3.6.1.4.1.38218.1.4.1 | no-access | ||
1.3.6.1.4.1.38218.1.4.1.1 | no-access |
Table of Trap notification destinations. |
||
trapDestinationsIndex | 1.3.6.1.4.1.38218.1.4.1.1.1 | integer | no-access |
Trap destination index [0..1]. |
trapDestinationsStatus | 1.3.6.1.4.1.38218.1.4.1.1.2 | integer | read-write |
Trap destination status. Set to 1 to ENABLE or 0 to DISABLE trap destination. Enumeration: 'disabled': 0, 'enabled': 1. |
trapDestinationsIP | 1.3.6.1.4.1.38218.1.4.1.1.3 | ipaddress | read-write |
Trap destination IP address. Set to the IP address of the destination SNMP manager. |
trapDestinationsCommunity | 1.3.6.1.4.1.38218.1.4.1.1.4 | displaystring | read-write |
Trap destination SNMP community. Set to the community name to be used with the destination SNMP manager. |
pdu_Information | 1.3.6.1.4.1.38218.1.5 | |||
pdu_Firmware | 1.3.6.1.4.1.38218.1.5.1 | displaystring | read-only |
pdu Firmware version. |
pdu_Nosockets | 1.3.6.1.4.1.38218.1.5.2 | integer | read-only |
pdu Number of sockets. |
pdu_ProductName | 1.3.6.1.4.1.38218.1.5.3 | displaystring | read-only |
pdu Product name. |
pdu_SerialNumber | 1.3.6.1.4.1.38218.1.5.4 | displaystring | read-only |
pdu Serial number. |
pdu_Meters | 1.3.6.1.4.1.38218.1.6 | |||
pdu_meter1_VRMS | 1.3.6.1.4.1.38218.1.6.1 | integer | read-only |
pdu Meter 1 RMS Voltage (VAC) x10. |
pdu_meter1_IRMS | 1.3.6.1.4.1.38218.1.6.2 | integer | read-only |
pdu Meter 1 RMS Current (A) x100. |
pdu_meter1_KWH | 1.3.6.1.4.1.38218.1.6.3 | integer32 | read-only |
pdu Meter 1 total energy consumption (kW/h) x10. |
pdu_meter1_KW | 1.3.6.1.4.1.38218.1.6.4 | integer32 | read-only |
pdu Meter 1 Kilowatts (kW) x1000. |
pdu_meter1_TPMU | 1.3.6.1.4.1.38218.1.6.5 | integer | read-only |
pdu Meter 1 Internal Temperature (C) x10. |
pdu_meter1_IPK | 1.3.6.1.4.1.38218.1.6.6 | integer | read-only |
pdu Meter 1 Peak Current (A) x10. |
pdu_meter1_VPK | 1.3.6.1.4.1.38218.1.6.7 | integer | read-only |
pdu Meter 1 Peak Voltage (V) x10. |
pdu_meter1_PF | 1.3.6.1.4.1.38218.1.6.8 | integer | read-only |
pdu Meter 1 Power Factor x1000 |
pdu_meter1_Freq | 1.3.6.1.4.1.38218.1.6.9 | integer | read-only |
pdu Meter 1 Frequency x10 |
pdu_meter2_VRMS | 1.3.6.1.4.1.38218.1.6.10 | integer | read-only |
pdu Meter 2 RMS Voltage (VAC) x10. |
pdu_meter2_IRMS | 1.3.6.1.4.1.38218.1.6.11 | integer | read-only |
pdu Meter 2 RMS Current (A) x100. |
pdu_meter2_KWH | 1.3.6.1.4.1.38218.1.6.12 | integer32 | read-only |
pdu Meter 2 total energy consumption (kW/h) x10. |
pdu_meter2_KW | 1.3.6.1.4.1.38218.1.6.13 | integer32 | read-only |
pdu Meter 2 Kilowatts (kW) x1000. |
pdu_meter2_TPMU | 1.3.6.1.4.1.38218.1.6.14 | integer | read-only |
pdu Meter 2 Internal Temperature (C) x10. |
pdu_meter2_IPK | 1.3.6.1.4.1.38218.1.6.15 | integer | read-only |
pdu Meter 2 Peak Current (A) x10. |
pdu_meter2_VPK | 1.3.6.1.4.1.38218.1.6.16 | integer | read-only |
pdu Meter 2 Peak Voltage (V) x10. |
pdu_meter2_PF | 1.3.6.1.4.1.38218.1.6.17 | integer | read-only |
pdu Meter 2 Power Factor x1000 |
pdu_meter2_Freq | 1.3.6.1.4.1.38218.1.6.18 | integer | read-only |
pdu Meter 2 Frequency x10 |
pdu_meter3_VRMS | 1.3.6.1.4.1.38218.1.6.19 | integer | read-only |
pdu Meter 3 RMS Voltage (VAC) x100. |
pdu_meter3_IRMS | 1.3.6.1.4.1.38218.1.6.20 | integer | read-only |
pdu Meter 3 RMS Current (A) x10. |
pdu_meter3_KWH | 1.3.6.1.4.1.38218.1.6.21 | integer32 | read-only |
pdu Meter 3 total energy consumption (kW/h) x10. |
pdu_meter3_KW | 1.3.6.1.4.1.38218.1.6.22 | integer32 | read-only |
pdu Meter 3 Kilowatts (kW) x1000. |
pdu_meter3_TPMU | 1.3.6.1.4.1.38218.1.6.23 | integer | read-only |
pdu Meter 3 Internal Temperature (C) x10. |
pdu_meter3_IPK | 1.3.6.1.4.1.38218.1.6.24 | integer | read-only |
pdu Meter 3 Peak Current (A) x10. |
pdu_meter3_VPK | 1.3.6.1.4.1.38218.1.6.25 | integer | read-only |
pdu Meter 3 Peak Voltage (V) x10. |
pdu_meter3_PF | 1.3.6.1.4.1.38218.1.6.26 | integer | read-only |
pdu Meter 3 Power Factor x1000 |
pdu_meter3_Freq | 1.3.6.1.4.1.38218.1.6.27 | integer | read-only |
pdu Meter 3 Frequency x10 |
pdu_sockets | 1.3.6.1.4.1.38218.1.7 | |||
pdu_socketsTable | 1.3.6.1.4.1.38218.1.7.1 | no-access | ||
1.3.6.1.4.1.38218.1.7.1.1 | no-access |
Table of socket status parameters. |
||
socket_Index | 1.3.6.1.4.1.38218.1.7.1.1.1 | integer | no-access |
socket index |
socket_Number | 1.3.6.1.4.1.38218.1.7.1.1.2 | integer | read-only |
socket number [Range 1 to 48] |
socket_Equipment | 1.3.6.1.4.1.38218.1.7.1.1.3 | displaystring | read-write |
socket equipment name. |
socket_ONOFF | 1.3.6.1.4.1.38218.1.7.1.1.4 | integer | read-write |
socket ON/OFF status [Set to 1 to switch ON, 0 to switch OFF] Enumeration: 'on': 1, 'off': 0. |
socket_AMPS | 1.3.6.1.4.1.38218.1.7.1.1.5 | integer | read-only |
socket current (Amps) x10. |
socket_KWH | 1.3.6.1.4.1.38218.1.7.1.1.6 | integer32 | read-write |
socket Energy (kWh) x10. |
socket_INFO | 1.3.6.1.4.1.38218.1.7.1.1.7 | integer | read-only |
socket information (status, phase and picture). |
pdu_Environmental | 1.3.6.1.4.1.38218.1.8 | |||
pdu_environmental_Temp1 | 1.3.6.1.4.1.38218.1.8.1 | integer | read-only |
Environmental Temperature probe 1 (C) x100. |
pdu_environmental_Temp1_Location | 1.3.6.1.4.1.38218.1.8.2 | displaystring | read-write |
Environmental Temperature probe 1 location name. |
pdu_environmental_Temp2 | 1.3.6.1.4.1.38218.1.8.3 | integer | read-only |
Environmental Temperature probe 2 (C) x100. |
pdu_environmental_Temp2_Location | 1.3.6.1.4.1.38218.1.8.4 | displaystring | read-write |
Environmental Temperature probe 2 location name. |
pdu_environmental_Temp3 | 1.3.6.1.4.1.38218.1.8.5 | integer | read-only |
Environmental Temperature probe 3 (C) x100. |
pdu_environmental_Temp3_Location | 1.3.6.1.4.1.38218.1.8.6 | displaystring | read-write |
Environmental Temperature probe 3 location name. |
pdu_environmental_Temp4 | 1.3.6.1.4.1.38218.1.8.7 | integer | read-only |
Environmental Temperature probe 4 (C) x100. |
pdu_environmental_Temp4_Location | 1.3.6.1.4.1.38218.1.8.8 | displaystring | read-write |
Environmental Temperature probe 4 location name. |
pdu_environmental_Temp5 | 1.3.6.1.4.1.38218.1.8.9 | integer | read-only |
Environmental Temperature probe 5 (C) x100. |
pdu_environmental_Temp5_Location | 1.3.6.1.4.1.38218.1.8.10 | displaystring | read-write |
Environmental Temperature probe 5 location name. |
pdu_environmental_Temp6 | 1.3.6.1.4.1.38218.1.8.11 | integer | read-only |
Environmental Temperature probe 6 (C) x100. |
pdu_environmental_Temp6_Location | 1.3.6.1.4.1.38218.1.8.12 | displaystring | read-write |
Environmental Temperature probe 6 location name. |
pdu_environmental_Temp7 | 1.3.6.1.4.1.38218.1.8.13 | integer | read-only |
Environmental Temperature probe 7 (C) x100. |
pdu_environmental_Temp7_Location | 1.3.6.1.4.1.38218.1.8.14 | displaystring | read-write |
Environmental Temperature probe 7 location name. |
pdu_environmental_Temp8 | 1.3.6.1.4.1.38218.1.8.15 | integer | read-only |
Environmental Temperature probe 8 (C) x100. |
pdu_environmental_Temp8_Location | 1.3.6.1.4.1.38218.1.8.16 | displaystring | read-write |
Environmental Temperature probe 8 location name. |
pdu_environmental_HumidityTemp | 1.3.6.1.4.1.38218.1.8.17 | integer | read-only |
Environmental Humidity probe Temperature (C) x100. |
pdu_environmental_Humidity | 1.3.6.1.4.1.38218.1.8.18 | integer | read-only |
Environmental humidity probe (%) x100. |
pdu_environmental_Contact1 | 1.3.6.1.4.1.38218.1.8.19 | integer | read-only |
Environmental contact input 1 status. Enumeration: 'open': 0, 'closed': 1. |
pdu_environmental_Contact1_Location | 1.3.6.1.4.1.38218.1.8.20 | displaystring | read-write |
Environmental contact input 1 location name. |
pdu_environmental_Contact2 | 1.3.6.1.4.1.38218.1.8.21 | integer | read-only |
Environmental contact input 2 status. Enumeration: 'open': 0, 'closed': 1. |
pdu_environmental_Contact2_Location | 1.3.6.1.4.1.38218.1.8.22 | displaystring | read-write |
Environmental contact input 2 location name. |
pdu_environmental_Contact3 | 1.3.6.1.4.1.38218.1.8.23 | integer | read-only |
Environmental contact input 3 status. Enumeration: 'open': 0, 'closed': 1. |
pdu_environmental_Contact3_Location | 1.3.6.1.4.1.38218.1.8.24 | displaystring | read-write |
Environmental contact input 3 location name. |
pdu_Security | 1.3.6.1.4.1.38218.1.9 | |||
pdu_Security_Door | 1.3.6.1.4.1.38218.1.9.1 | integer | read-only |
Security door contact status. Enumeration: 'open': 0, 'closed': 1. |
pdu_Security_Lock | 1.3.6.1.4.1.38218.1.9.2 | integer | read-write |
Security lock status [Set to 1 to unlock] Enumeration: 'locked': 0, 'unlocked': 1. |
pdu_Security_Wild | 1.3.6.1.4.1.38218.1.9.3 | integer | read-write |
Security Card/PIN Wildcard status. Set with 1 to enable or 0 to disable Wildcard feature. Enumeration: 'disabled': 0, 'enabled': 1. |
pdu_Security_UnlockTimeDate | 1.3.6.1.4.1.38218.1.9.4 | displaystring | read-only |
Time and data of last unlock. |
pdu_SecurityTable | 1.3.6.1.4.1.38218.1.9.5 | no-access | ||
1.3.6.1.4.1.38218.1.9.5.1 | no-access |
Table of pdu- Card/PIN codes. |
||
pdu_Security_Index | 1.3.6.1.4.1.38218.1.9.5.1.1 | integer | no-access |
Security Card/PIN code index. |
pdu_Security_Code | 1.3.6.1.4.1.38218.1.9.5.1.2 | integer32 | read-write |
Security Card/PIN number. |
pdu_Logs | 1.3.6.1.4.1.38218.1.10 | |||
pdu_Logs_Number | 1.3.6.1.4.1.38218.1.10.1 | integer32 | read-only |
Log file number of log lines stored. |
pdu_Logs_Index | 1.3.6.1.4.1.38218.1.10.2 | integer32 | read-write |
Log file line index pointer. Set to line to be read. |
pdu_Logs_Data | 1.3.6.1.4.1.38218.1.10.3 | displaystring | read-only |
Log file log line data. |
pdu_Logs_Clear | 1.3.6.1.4.1.38218.1.10.4 | integer | read-write |
Log file clear. Set with 1 to clear log file. Enumeration: 'reset': 1. |
pdu_Traps | 1.3.6.1.4.1.38218.1.11 | |||
pdu_TrapThresholds | 1.3.6.1.4.1.38218.1.11.1 | |||
meter1_VRMSLowAlarm | 1.3.6.1.4.1.38218.1.11.1.1 | integer | read-write |
Meter 1 Voltage LOW alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
meter1_VRMSLow | 1.3.6.1.4.1.38218.1.11.1.2 | integer | read-write |
eter 1 Voltage LOW trap threshold x10. |
meter1_VRMSHighAlarm | 1.3.6.1.4.1.38218.1.11.1.3 | integer | read-write |
Meter 1 Voltage HIGH alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
meter1_VRMSHigh | 1.3.6.1.4.1.38218.1.11.1.4 | integer | read-write |
Meter 1 Voltage HIGH trap threshold x10. |
meter1_IRMSLowAlarm | 1.3.6.1.4.1.38218.1.11.1.5 | integer | read-write |
Meter 1 Current LOW alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
meter1_IRMSLow | 1.3.6.1.4.1.38218.1.11.1.6 | integer | read-write |
Meter 1 Current LOW trap threshold x10. |
meter1_IRMSHighAlarm | 1.3.6.1.4.1.38218.1.11.1.7 | integer | read-write |
Meter 1 Current HIGH alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
meter1_IRMSHigh | 1.3.6.1.4.1.38218.1.11.1.8 | integer | read-write |
Meter 1 Current HIGH trap threshold x10. |
meter1_KWSLowAlarm | 1.3.6.1.4.1.38218.1.11.1.9 | integer | read-write |
Meter 1 Kilowatts LOW alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
meter1_KWSLow | 1.3.6.1.4.1.38218.1.11.1.10 | integer | read-write |
Meter 1 Kilowatts LOW trap threshold x10. |
meter1_KWSHighAlarm | 1.3.6.1.4.1.38218.1.11.1.11 | integer | read-write |
Meter 1 Kilowatts HIGH alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
meter1_KWSHigh | 1.3.6.1.4.1.38218.1.11.1.12 | integer | read-write |
Meter 1 Kilowatts HIGH trap threshold x10. |
meter1_TempLowAlarm | 1.3.6.1.4.1.38218.1.11.1.13 | integer | read-write |
Meter 1 Internal temperature LOW alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
meter1_TempLow | 1.3.6.1.4.1.38218.1.11.1.14 | integer | read-write |
Meter 1 Internal temperature LOW trap threshold x10. |
meter1_TempHighAlarm | 1.3.6.1.4.1.38218.1.11.1.15 | integer | read-write |
Meter 1 Internal temperature HIGH alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
meter1_TempHigh | 1.3.6.1.4.1.38218.1.11.1.16 | integer | read-write |
Meter 1 Internal temperature HIGH trap threshold x10. |
meter1_PFLowAlarm | 1.3.6.1.4.1.38218.1.11.1.17 | integer | read-write |
Meter 1 Power factor LOW alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
meter1_PFLow | 1.3.6.1.4.1.38218.1.11.1.18 | integer | read-write |
Meter 1 Power factor LOW trap threshold x10. |
meter1_PFHighAlarm | 1.3.6.1.4.1.38218.1.11.1.19 | integer | read-write |
Meter 1 Power factor HIGH alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
meter1_PFHigh | 1.3.6.1.4.1.38218.1.11.1.20 | integer | read-write |
Meter 1 Power factor HIGH trap threshold x10. |
meter1_FreqLowAlarm | 1.3.6.1.4.1.38218.1.11.1.21 | integer | read-write |
Meter 1 Frequency LOW alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
meter1_FreqLow | 1.3.6.1.4.1.38218.1.11.1.22 | integer | read-write |
Meter 1 Frequency LOW trap threshold x10. |
meter1_FreqHighAlarm | 1.3.6.1.4.1.38218.1.11.1.23 | integer | read-write |
Meter 1 Frequency HIGH alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
meter1_FreqHigh | 1.3.6.1.4.1.38218.1.11.1.24 | integer | read-write |
Meter 1 Frequency HIGH trap threshold x10. |
meter2_VRMSLowAlarm | 1.3.6.1.4.1.38218.1.11.1.25 | integer | read-write |
Meter 2 Voltage LOW alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
meter2_VRMSLow | 1.3.6.1.4.1.38218.1.11.1.26 | integer | read-write |
eter 1 Voltage LOW trap threshold x10. |
meter2_VRMSHighAlarm | 1.3.6.1.4.1.38218.1.11.1.27 | integer | read-write |
Meter 2 Voltage HIGH alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
meter2_VRMSHigh | 1.3.6.1.4.1.38218.1.11.1.28 | integer | read-write |
Meter 2 Voltage HIGH trap threshold x10. |
meter2_IRMSLowAlarm | 1.3.6.1.4.1.38218.1.11.1.29 | integer | read-write |
Meter 2 Current LOW alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
meter2_IRMSLow | 1.3.6.1.4.1.38218.1.11.1.30 | integer | read-write |
Meter 2 Current LOW trap threshold x10. |
meter2_IRMSHighAlarm | 1.3.6.1.4.1.38218.1.11.1.31 | integer | read-write |
Meter 2 Current HIGH alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
meter2_IRMSHigh | 1.3.6.1.4.1.38218.1.11.1.32 | integer | read-write |
Meter 2 Current HIGH trap threshold x10. |
meter2_KWSLowAlarm | 1.3.6.1.4.1.38218.1.11.1.33 | integer | read-write |
Meter 2 Kilowatts LOW alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
meter2_KWSLow | 1.3.6.1.4.1.38218.1.11.1.34 | integer | read-write |
Meter 2 Kilowatts LOW trap threshold x10. |
meter2_KWSHighAlarm | 1.3.6.1.4.1.38218.1.11.1.35 | integer | read-write |
Meter 2 Kilowatts HIGH alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
meter2_KWSHigh | 1.3.6.1.4.1.38218.1.11.1.36 | integer | read-write |
Meter 2 Kilowatts HIGH trap threshold x10. |
meter2_TempLowAlarm | 1.3.6.1.4.1.38218.1.11.1.37 | integer | read-write |
Meter 2 Internal temperature LOW alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
meter2_TempLow | 1.3.6.1.4.1.38218.1.11.1.38 | integer | read-write |
Meter 2 Internal temperature LOW trap threshold x10. |
meter2_TempHighAlarm | 1.3.6.1.4.1.38218.1.11.1.39 | integer | read-write |
Meter 2 Internal temperature HIGH alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
meter2_TempHigh | 1.3.6.1.4.1.38218.1.11.1.40 | integer | read-write |
Meter 2 Internal temperature HIGH trap threshold x10. |
meter2_PFLowAlarm | 1.3.6.1.4.1.38218.1.11.1.41 | integer | read-write |
Meter 2 Power factor LOW alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
meter2_PFLow | 1.3.6.1.4.1.38218.1.11.1.42 | integer | read-write |
Meter 2 Power factor LOW trap threshold x10. |
meter2_PFHighAlarm | 1.3.6.1.4.1.38218.1.11.1.43 | integer | read-write |
Meter 2 Power factor HIGH alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
meter2_PFHigh | 1.3.6.1.4.1.38218.1.11.1.44 | integer | read-write |
Meter 2 Power factor HIGH trap threshold x10. |
meter2_FreqLowAlarm | 1.3.6.1.4.1.38218.1.11.1.45 | integer | read-write |
Meter 2 Frequency LOW alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
meter2_FreqLow | 1.3.6.1.4.1.38218.1.11.1.46 | integer | read-write |
Meter 2 Frequency LOW trap threshold x10. |
meter2_FreqHighAlarm | 1.3.6.1.4.1.38218.1.11.1.47 | integer | read-write |
Meter 2 Frequency HIGH alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
meter2_FreqHigh | 1.3.6.1.4.1.38218.1.11.1.48 | integer | read-write |
Meter 2 Frequency HIGH trap threshold x10. |
meter3_VRMSLowAlarm | 1.3.6.1.4.1.38218.1.11.1.49 | integer | read-write |
Meter 3 Voltage LOW alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
meter3_VRMSLow | 1.3.6.1.4.1.38218.1.11.1.50 | integer | read-write |
eter 1 Voltage LOW trap threshold x10. |
meter3_VRMSHighAlarm | 1.3.6.1.4.1.38218.1.11.1.51 | integer | read-write |
Meter 3 Voltage HIGH alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
meter3_VRMSHigh | 1.3.6.1.4.1.38218.1.11.1.52 | integer | read-write |
Meter 3 Voltage HIGH trap threshold x10. |
meter3_IRMSLowAlarm | 1.3.6.1.4.1.38218.1.11.1.53 | integer | read-write |
Meter 3 Current LOW alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
meter3_IRMSLow | 1.3.6.1.4.1.38218.1.11.1.54 | integer | read-write |
Meter 3 Current LOW trap threshold x10. |
meter3_IRMSHighAlarm | 1.3.6.1.4.1.38218.1.11.1.55 | integer | read-write |
Meter 3 Current HIGH alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
meter3_IRMSHigh | 1.3.6.1.4.1.38218.1.11.1.56 | integer | read-write |
Meter 3 Current HIGH trap threshold x10. |
meter3_KWSLowAlarm | 1.3.6.1.4.1.38218.1.11.1.57 | integer | read-write |
Meter 3 Kilowatts LOW alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
meter3_KWSLow | 1.3.6.1.4.1.38218.1.11.1.58 | integer | read-write |
Meter 3 Kilowatts LOW trap threshold x10. |
meter3_KWSHighAlarm | 1.3.6.1.4.1.38218.1.11.1.59 | integer | read-write |
Meter 3 Kilowatts HIGH alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
meter3_KWSHigh | 1.3.6.1.4.1.38218.1.11.1.60 | integer | read-write |
Meter 3 Kilowatts HIGH trap threshold x10. |
meter3_TempLowAlarm | 1.3.6.1.4.1.38218.1.11.1.61 | integer | read-write |
Meter 3 Internal temperature LOW alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
meter3_TempLow | 1.3.6.1.4.1.38218.1.11.1.62 | integer | read-write |
Meter 3 Internal temperature LOW trap threshold x10. |
meter3_TempHighAlarm | 1.3.6.1.4.1.38218.1.11.1.63 | integer | read-write |
Meter 3 Internal temperature HIGH alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
meter3_TempHigh | 1.3.6.1.4.1.38218.1.11.1.64 | integer | read-write |
Meter 3 Internal temperature HIGH trap threshold x10. |
meter3_PFLowAlarm | 1.3.6.1.4.1.38218.1.11.1.65 | integer | read-write |
Meter 3 Power factor LOW alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
meter3_PFLow | 1.3.6.1.4.1.38218.1.11.1.66 | integer | read-write |
Meter 3 Power factor LOW trap threshold x10. |
meter3_PFHighAlarm | 1.3.6.1.4.1.38218.1.11.1.67 | integer | read-write |
Meter 3 Power factor HIGH alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
meter3_PFHigh | 1.3.6.1.4.1.38218.1.11.1.68 | integer | read-write |
Meter 3 Power factor HIGH trap threshold x10. |
meter3_FreqLowAlarm | 1.3.6.1.4.1.38218.1.11.1.69 | integer | read-write |
Meter 3 Frequency LOW alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
meter3_FreqLow | 1.3.6.1.4.1.38218.1.11.1.70 | integer | read-write |
Meter 3 Frequency LOW trap threshold x10. |
meter3_FreqHighAlarm | 1.3.6.1.4.1.38218.1.11.1.71 | integer | read-write |
Meter 3 Frequency HIGH alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
meter3_FreqHigh | 1.3.6.1.4.1.38218.1.11.1.72 | integer | read-write |
Meter 3 Frequency HIGH trap threshold x10. |
socket_ThresholdsTable | 1.3.6.1.4.1.38218.1.11.1.73 | no-access | ||
1.3.6.1.4.1.38218.1.11.1.73.1 | no-access |
Table of socket trap notification thresholds. |
||
socket_ThresholdsNumber | 1.3.6.1.4.1.38218.1.11.1.73.1.1 | integer | no-access |
Trap threshold socket- number [1..48]. |
socket_AMPSLowAlarm | 1.3.6.1.4.1.38218.1.11.1.73.1.2 | integer | read-write |
socket Current LOW alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
socket_AMPSLow | 1.3.6.1.4.1.38218.1.11.1.73.1.3 | integer | read-write |
socket Current LOW trap threshold x10. |
socket_AMPSHighAlarm | 1.3.6.1.4.1.38218.1.11.1.73.1.4 | integer | read-write |
socket Current HIGH alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
socket_AMPSHigh | 1.3.6.1.4.1.38218.1.11.1.73.1.5 | integer | read-write |
socket Current HIGH trap threshold x10. |
environmental_Temp1LowAlarm | 1.3.6.1.4.1.38218.1.11.1.74 | integer | read-write |
Environmental temperature probe 1 LOW alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
environmental_Temp1Low | 1.3.6.1.4.1.38218.1.11.1.75 | integer | read-write |
Environmental temperature probe 1 LOW trap threshold x10. |
environmental_Temp1HighAlarm | 1.3.6.1.4.1.38218.1.11.1.76 | integer | read-write |
Environmental temperature probe 1 HIGH alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
environmental_Temp1High | 1.3.6.1.4.1.38218.1.11.1.77 | integer | read-write |
Environmental temperature probe 1 HIGH trap threshold x10. |
environmental_Temp2LowAlarm | 1.3.6.1.4.1.38218.1.11.1.78 | integer | read-write |
Environmental temperature probe 2 LOW alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
environmental_Temp2Low | 1.3.6.1.4.1.38218.1.11.1.79 | integer | read-write |
Environmental temperature probe 2 LOW trap threshold x10. |
environmental_Temp2HighAlarm | 1.3.6.1.4.1.38218.1.11.1.80 | integer | read-write |
Environmental temperature probe 2 HIGH alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
environmental_Temp2High | 1.3.6.1.4.1.38218.1.11.1.81 | integer | read-write |
Environmental temperature probe 2 HIGH trap threshold x10. |
environmental_Temp3LowAlarm | 1.3.6.1.4.1.38218.1.11.1.82 | integer | read-write |
Environmental temperature probe 3 LOW alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
environmental_Temp3Low | 1.3.6.1.4.1.38218.1.11.1.83 | integer | read-write |
Environmental temperature probe 3 LOW trap threshold x10. |
environmental_Temp3HighAlarm | 1.3.6.1.4.1.38218.1.11.1.84 | integer | read-write |
Environmental temperature probe 3 HIGH alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
environmental_Temp3High | 1.3.6.1.4.1.38218.1.11.1.85 | integer | read-write |
Environmental temperature probe 3 HIGH trap threshold x10. |
environmental_Temp4LowAlarm | 1.3.6.1.4.1.38218.1.11.1.86 | integer | read-write |
Environmental temperature probe 4 LOW alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
environmental_Temp4Low | 1.3.6.1.4.1.38218.1.11.1.87 | integer | read-write |
Environmental temperature probe 4 LOW trap threshold x10. |
environmental_Temp4HighAlarm | 1.3.6.1.4.1.38218.1.11.1.88 | integer | read-write |
Environmental temperature probe 4 HIGH alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
environmental_Temp4High | 1.3.6.1.4.1.38218.1.11.1.89 | integer | read-write |
Environmental temperature probe 4 HIGH trap threshold x10. |
environmental_Temp5LowAlarm | 1.3.6.1.4.1.38218.1.11.1.90 | integer | read-write |
Environmental temperature probe 5 LOW alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
environmental_Temp5Low | 1.3.6.1.4.1.38218.1.11.1.91 | integer | read-write |
Environmental temperature probe 5 LOW trap threshold x10. |
environmental_Temp5HighAlarm | 1.3.6.1.4.1.38218.1.11.1.92 | integer | read-write |
Environmental temperature probe 5 HIGH alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
environmental_Temp5High | 1.3.6.1.4.1.38218.1.11.1.93 | integer | read-write |
Environmental temperature probe 5 HIGH trap threshold x10. |
environmental_Temp6LowAlarm | 1.3.6.1.4.1.38218.1.11.1.94 | integer | read-write |
Environmental temperature probe 6 LOW alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
environmental_Temp6Low | 1.3.6.1.4.1.38218.1.11.1.95 | integer | read-write |
Environmental temperature probe 6 LOW trap threshold x10. |
environmental_Temp6HighAlarm | 1.3.6.1.4.1.38218.1.11.1.96 | integer | read-write |
Environmental temperature probe 6 HIGH alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
environmental_Temp6High | 1.3.6.1.4.1.38218.1.11.1.97 | integer | read-write |
Environmental temperature probe 6 HIGH trap threshold x10. |
environmental_Temp7LowAlarm | 1.3.6.1.4.1.38218.1.11.1.98 | integer | read-write |
Environmental temperature probe 7 LOW alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
environmental_Temp7Low | 1.3.6.1.4.1.38218.1.11.1.99 | integer | read-write |
Environmental temperature probe 7 LOW trap threshold x10. |
environmental_Temp7HighAlarm | 1.3.6.1.4.1.38218.1.11.1.100 | integer | read-write |
Environmental temperature probe 7 HIGH alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
environmental_Temp7High | 1.3.6.1.4.1.38218.1.11.1.101 | integer | read-write |
Environmental temperature probe 7 HIGH trap threshold x10. |
environmental_Temp8LowAlarm | 1.3.6.1.4.1.38218.1.11.1.102 | integer | read-write |
Environmental temperature probe 8 LOW alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
environmental_Temp8Low | 1.3.6.1.4.1.38218.1.11.1.103 | integer | read-write |
Environmental temperature probe 8 LOW trap threshold x10. |
environmental_Temp8HighAlarm | 1.3.6.1.4.1.38218.1.11.1.104 | integer | read-write |
Environmental temperature probe 8 HIGH alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
environmental_Temp8High | 1.3.6.1.4.1.38218.1.11.1.105 | integer | read-write |
Environmental temperature probe 8 HIGH trap threshold x10. |
environmental_HumidityTempLowAlarm | 1.3.6.1.4.1.38218.1.11.1.106 | integer | read-write |
Environmental humidity probe temperature LOW alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
environmental_HumidityTempLow | 1.3.6.1.4.1.38218.1.11.1.107 | integer | read-write |
Environmental humidity probe temperature LOW trap threshold x10. |
environmental_HumidityTempHighAlarm | 1.3.6.1.4.1.38218.1.11.1.108 | integer | read-write |
Environmental humidity probe temperature HIGH alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
environmental_HumidityTempHigh | 1.3.6.1.4.1.38218.1.11.1.109 | integer | read-write |
Environmental humidity probe temperature HIGH trap threshold x10. |
environmental_HumidityLowAlarm | 1.3.6.1.4.1.38218.1.11.1.110 | integer | read-write |
Environmental humidity probe LOW alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
environmental_HumidityLow | 1.3.6.1.4.1.38218.1.11.1.111 | integer | read-write |
Environmental humidity probe LOW trap threshold x10. |
environmental_HumidityHighAlarm | 1.3.6.1.4.1.38218.1.11.1.112 | integer | read-write |
Environmental humidity probe HIGH alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
environmental_HumidityHigh | 1.3.6.1.4.1.38218.1.11.1.113 | integer | read-write |
Environmental humidity probe HIGH trap threshold x10. |
environmental_Contact1OpenedAlarm | 1.3.6.1.4.1.38218.1.11.1.114 | integer | read-write |
Environmental Contact 1 OPENED alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
environmental_Contact1ClosedAlarm | 1.3.6.1.4.1.38218.1.11.1.115 | integer | read-write |
Environmental Contact 1 CLOSED alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
environmental_Contact2OpenedAlarm | 1.3.6.1.4.1.38218.1.11.1.116 | integer | read-write |
Environmental Contact 2 OPENED alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
environmental_Contact2ClosedAlarm | 1.3.6.1.4.1.38218.1.11.1.117 | integer | read-write |
Environmental Contact 2 CLOSED alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
environmental_Contact3OpenedAlarm | 1.3.6.1.4.1.38218.1.11.1.118 | integer | read-write |
Environmental Contact 3 OPENED alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
environmental_Contact3ClosedAlarm | 1.3.6.1.4.1.38218.1.11.1.119 | integer | read-write |
Environmental Contact 3 CLOSED alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
security_DoorOpenedAlarm | 1.3.6.1.4.1.38218.1.11.1.120 | integer | read-write |
Security Door OPENED alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
security_DoorClosedAlarm | 1.3.6.1.4.1.38218.1.11.1.121 | integer | read-write |
Security Door CLOSED alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
security_LockUnlockedAlarm | 1.3.6.1.4.1.38218.1.11.1.122 | integer | read-write |
Security Lock UNLOCKED alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
security_LockLockedAlarm | 1.3.6.1.4.1.38218.1.11.1.123 | integer | read-write |
Security Lock LOCKED alarm disabled/enabled. Enumeration: 'disabled': 0, 'enabled': 1. |
slave_pdus | 1.3.6.1.4.1.38218.2 | |||
slave_slaveSelected | 1.3.6.1.4.1.38218.2.1 | integer | read-write |
Compatible - Currently selected slave pdu. Set to number between 1 and slave-Nopdus |
slave_Information | 1.3.6.1.4.1.38218.2.2 | |||
slave_pduName | 1.3.6.1.4.1.38218.2.2.1 | displaystring | read-only |
Compatible - slave pdu Name. |
slave_pduStatus | 1.3.6.1.4.1.38218.2.2.2 | integer | read-write |
Compatible - slave pdu ONLINE / OFFLINE or DISABLED status. Enumeration: 'disabled': 2, 'offline': 0, 'online': 1. |
slave_pduAddress | 1.3.6.1.4.1.38218.2.2.3 | integer | read-only |
Compatible - slave pdu MODBUS Address. |
slave_pduFirmware | 1.3.6.1.4.1.38218.2.2.4 | displaystring | read-only |
Compatible - slave pdu Firmware version. |
slave_Info_NotUsed2 | 1.3.6.1.4.1.38218.2.2.5 | displaystring | read-only |
Compatible - Not used. |
slave_pduNosockets | 1.3.6.1.4.1.38218.2.2.6 | integer | read-only |
Compatible - slave pdu Number of sockets. |
slave_Info_NotUsed3 | 1.3.6.1.4.1.38218.2.2.7 | integer | read-only |
Compatible - Not used. |
slave_Info_NotUsed4 | 1.3.6.1.4.1.38218.2.2.8 | integer | read-only |
Compatible - Not used. |
slave_Info_pduReset | 1.3.6.1.4.1.38218.2.2.9 | integer | read-write |
Compatible - slave pdu Reset. |
slave_Info_pdukWhReset | 1.3.6.1.4.1.38218.2.2.10 | integer | read-write |
Compatible - slave pdu Reset energy. |
slave_Status | 1.3.6.1.4.1.38218.2.3 | |||
slave_meter1_VRMS | 1.3.6.1.4.1.38218.2.3.1 | integer | read-write |
Compatible - slave Meter 1 RMS Voltage (VAC) x10. |
slave_meter1_IRMS | 1.3.6.1.4.1.38218.2.3.2 | integer | read-only |
Compatible - slave Meter 1 RMS Current (A) x10. |
slave_meter1_KWH | 1.3.6.1.4.1.38218.2.3.3 | integer32 | read-only |
Compatible - slave Meter 1 total energy consumption (kW/h) x10. |
slave_meter1_KW | 1.3.6.1.4.1.38218.2.3.4 | integer32 | read-only |
Compatible - slave Meter 1 Kilowatts (kW) x1000. |
slave_meter1_TPMU | 1.3.6.1.4.1.38218.2.3.5 | integer | read-only |
Compatible - slave Meter 1 Internal Temperature (C) x10. |
slave_Status_NotUsed1 | 1.3.6.1.4.1.38218.2.3.6 | integer | read-only |
Compatible - Not used. |
slave_Status_NotUsed2 | 1.3.6.1.4.1.38218.2.3.7 | integer | read-only |
Compatible - Not used. |
slave_meter1_IPK | 1.3.6.1.4.1.38218.2.3.8 | integer | read-only |
Compatible - slave Meter 1 Peak Current (A) x10. |
slave_meter1_VPK | 1.3.6.1.4.1.38218.2.3.9 | integer | read-only |
Compatible - slave Meter 1 Peak Voltage (V) x10. |
slave_meter1_PF | 1.3.6.1.4.1.38218.2.3.10 | integer | read-only |
Compatible - slave Meter 1 Power Factor x1000 |
slave_Status_NotUsed3 | 1.3.6.1.4.1.38218.2.3.11 | integer | read-only |
Compatible - Not used. |
slave_Status_NotUsed4 | 1.3.6.1.4.1.38218.2.3.12 | integer | read-only |
Compatible - Not used. |
slave_Status_NotUsed5 | 1.3.6.1.4.1.38218.2.3.13 | integer | read-only |
Compatible - Not used. |
slave_meter1_Freq | 1.3.6.1.4.1.38218.2.3.14 | integer | read-only |
Compatible - slave Meter 1 Frequency x10 |
slave_meter2_VRMS | 1.3.6.1.4.1.38218.2.3.15 | integer | read-only |
Compatible - slave Meter 2 RMS Voltage (VAC) x10. |
slave_meter2_IRMS | 1.3.6.1.4.1.38218.2.3.16 | integer | read-only |
Compatible - slave Meter 2 RMS Current (A) x10. |
slave_meter2_KWH | 1.3.6.1.4.1.38218.2.3.17 | integer32 | read-only |
Compatible - slave Meter 2 total energy consumption (kW/h) x10. |
slave_meter2_KW | 1.3.6.1.4.1.38218.2.3.18 | integer32 | read-only |
Compatible - slave Meter 2 Kilowatts (kW) x1000. |
slave_meter2_TPMU | 1.3.6.1.4.1.38218.2.3.19 | integer | read-only |
Compatible - slave Meter 2 Internal Temperature (C) x10. |
slave_meter2_IPK | 1.3.6.1.4.1.38218.2.3.20 | integer | read-only |
Compatible - slave Meter 2 Peak Current (A) x10. |
slave_meter2_VPK | 1.3.6.1.4.1.38218.2.3.21 | integer | read-only |
Compatible - slave Meter 2 Peak Voltage (V) x10. |
slave_meter2_PF | 1.3.6.1.4.1.38218.2.3.22 | integer | read-only |
Compatible - slave Meter 2 Power Factor x1000 |
slave_meter2_Freq | 1.3.6.1.4.1.38218.2.3.23 | integer | read-only |
Compatible - slave Meter 2 Frequency x10 |
slave_meter3_VRMS | 1.3.6.1.4.1.38218.2.3.24 | integer | read-only |
Compatible - slave Meter 3 RMS Voltage (VAC) x10. |
slave_meter3_IRMS | 1.3.6.1.4.1.38218.2.3.25 | integer | read-only |
Compatible - slave Meter 3 RMS Current (A) x10. |
slave_meter3_KWH | 1.3.6.1.4.1.38218.2.3.26 | integer32 | read-only |
Compatible - slave Meter 3 total energy consumption (kW/h) x10. |
slave_meter3_KW | 1.3.6.1.4.1.38218.2.3.27 | integer32 | read-only |
Compatible - slave Meter 3 Kilowatts (kW) x1000. |
slave_meter3_TPMU | 1.3.6.1.4.1.38218.2.3.28 | integer | read-only |
Compatible - slave Meter 3 Internal Temperature (C) x10. |
slave_meter3_IPK | 1.3.6.1.4.1.38218.2.3.29 | integer | read-only |
Compatible - slave Meter 3 Peak Current (A) x10. |
slave_meter3_VPK | 1.3.6.1.4.1.38218.2.3.30 | integer | read-only |
Compatible - slave Meter 3 Peak Voltage (V) x10. |
slave_meter3_PF | 1.3.6.1.4.1.38218.2.3.31 | integer | read-only |
Compatible - slave Meter 3 Power Factor x1000 |
slave_meter3_Freq | 1.3.6.1.4.1.38218.2.3.32 | integer | read-only |
Compatible - slave Meter 3 Frequency x10 |
slave_sockets | 1.3.6.1.4.1.38218.2.4 | |||
slave_socketsTable | 1.3.6.1.4.1.38218.2.4.1 | no-access | ||
1.3.6.1.4.1.38218.2.4.1.1 | no-access |
Table of socket status parameters. |
||
slave_socket_Index | 1.3.6.1.4.1.38218.2.4.1.1.1 | integer | no-access |
socket index |
slave_socket_Number | 1.3.6.1.4.1.38218.2.4.1.1.2 | integer | no-access |
socket number [Range 1 to 48] |
slave_socket_NotUsed1 | 1.3.6.1.4.1.38218.2.4.1.1.3 | displaystring | read-only |
Compatible - Not used. |
slave_socket_ONOFF | 1.3.6.1.4.1.38218.2.4.1.1.4 | integer | read-write |
socket ON/OFF status [Compatible - Write ignored] Enumeration: 'on': 1, 'off': 0. |
slave_socket_AMPS | 1.3.6.1.4.1.38218.2.4.1.1.5 | integer | read-only |
socket current (Amps) x10. |
slave_socket_KWH | 1.3.6.1.4.1.38218.2.4.1.1.6 | integer32 | read-write |
socket Energy (kWh) x10. |
socket_Selected | 1.3.6.1.4.1.38218.2.4.2 | integer | read-write |
Compatible - Currently selected socket. Set to number between 1 and slave-pduNosockets |
socket_AllON | 1.3.6.1.4.1.38218.2.4.3 | integer | read-write |
Set all sockets in system to ON. |
socket_AllOFF | 1.3.6.1.4.1.38218.2.4.4 | integer | read-write |
Set all sockets in system to OFF. |
slave_Environmental | 1.3.6.1.4.1.38218.2.5 | |||
slave_environmental_Temp1 | 1.3.6.1.4.1.38218.2.5.1 | integer | read-only |
Compatible - Environmental Temperature probe 1 (C) x100. |
slave_environmental_Temp2 | 1.3.6.1.4.1.38218.2.5.2 | integer | read-only |
Compatible - Environmental Temperature probe 2 (C) x100. |
slave_environmental_Temp3 | 1.3.6.1.4.1.38218.2.5.3 | integer | read-only |
Compatible - Environmental Temperature probe 3 (C) x100. |
slave_environmental_Temp4 | 1.3.6.1.4.1.38218.2.5.4 | integer | read-only |
Compatible - Environmental Temperature probe 4 (C) x100. |
slave_environmental_Temp5 | 1.3.6.1.4.1.38218.2.5.5 | integer | read-only |
Compatible - Environmental Temperature probe 5 (C) x100. |
slave_environmental_Temp6 | 1.3.6.1.4.1.38218.2.5.6 | integer | read-only |
Compatible - Environmental Temperature probe 6 (C) x100. |
slave_environmental_Temp7 | 1.3.6.1.4.1.38218.2.5.7 | integer | read-only |
Compatible - Environmental Temperature probe 7 (C) x100. |
slave_environmental_Temp8 | 1.3.6.1.4.1.38218.2.5.8 | integer | read-only |
Compatible - Environmental Temperature probe 8 (C) x100. |
slave_environmental_HumidityTemp | 1.3.6.1.4.1.38218.2.5.9 | integer | read-only |
Compatible - Environmental Humidity probe Temperature (C) x100. |
slave_environmental_Humidity | 1.3.6.1.4.1.38218.2.5.10 | integer | read-only |
Compatible - Environmental humidity probe (%) x100. |
slave_environmental_Contact1 | 1.3.6.1.4.1.38218.2.5.11 | integer | read-write |
Compatible - Environmental contact input 1 status. Enumeration: 'open': 0, 'closed': 1. |
slave_environmental_Contact2 | 1.3.6.1.4.1.38218.2.5.12 | integer | read-write |
Compatible - Environmental contact input 2 status. Enumeration: 'open': 0, 'closed': 1. |
slave_environmental_Contact3 | 1.3.6.1.4.1.38218.2.5.13 | integer | read-write |
Compatible - Environmental contact input 3 status. Enumeration: 'open': 0, 'closed': 1. |
slave_Security | 1.3.6.1.4.1.38218.2.6 | |||
slave_Security_Door | 1.3.6.1.4.1.38218.2.6.1 | integer | read-only |
Compatible - Security door contact status. Enumeration: 'open': 0, 'closed': 1. |
slave_Security_Lock | 1.3.6.1.4.1.38218.2.6.2 | integer | read-write |
Compatible - Security lock status. Set with any data to force unlock. Enumeration: 'locked': 0, 'unlocked': 1. |
slave_Traps | 1.3.6.1.4.1.38218.2.7 | |||
slave_TrapSetNotifications | 1.3.6.1.4.1.38218.2.7.1 | |||
slave_Set_meter1_VRMSLow | 1.3.6.1.4.1.38218.2.7.1.1 |
Meter 1 Voltage LOW trap SET notification |
||
slave_Set_meter1_VRMSHigh | 1.3.6.1.4.1.38218.2.7.1.2 |
Meter 1 Voltage HIGH trap SET notification |
||
slave_Set_meter1_IRMSLow | 1.3.6.1.4.1.38218.2.7.1.3 |
Meter 1 Amps LOW trap SET notification |
||
slave_Set_meter1_IRMSHigh | 1.3.6.1.4.1.38218.2.7.1.4 |
Meter 1 Amps HIGH trap SET notification |
||
slave_Set_meter1_KWSLow | 1.3.6.1.4.1.38218.2.7.1.5 |
Meter 1 Kilowatts LOW trap SET notification |
||
slave_Set_meter1_KWSHigh | 1.3.6.1.4.1.38218.2.7.1.6 |
Meter 1 Kilowatts HIGH trap SET notification |
||
slave_Set_meter1_TempLow | 1.3.6.1.4.1.38218.2.7.1.7 |
Meter 1 Temperature LOW trap SET notification |
||
slave_Set_meter1_TempHigh | 1.3.6.1.4.1.38218.2.7.1.8 |
Meter 1 Temperature HIGH trap SET notification |
||
slave_Set_socket_AMPSLow | 1.3.6.1.4.1.38218.2.7.1.9 |
socket Amps LOW trap SET notification |
||
slave_Set_socket_AMPSHigh | 1.3.6.1.4.1.38218.2.7.1.10 |
socket Amps HIGH trap SET notification |
||
slave_Set_environmental_Temp1Low | 1.3.6.1.4.1.38218.2.7.1.11 |
Environmental Temperature probe 1 LOW trap SET notification |
||
slave_Set_environmental_Temp1High | 1.3.6.1.4.1.38218.2.7.1.12 |
Environmental Temperature probe 1 HIGH trap SET notification |
||
slave_Set_environmental_Temp2Low | 1.3.6.1.4.1.38218.2.7.1.13 |
Environmental Temperature probe 2 LOW trap SET notification |
||
slave_Set_environmental_Temp2High | 1.3.6.1.4.1.38218.2.7.1.14 |
Environmental Temperature probe 2 HIGH trap SET notification |
||
slave_Set_environmental_Temp3Low | 1.3.6.1.4.1.38218.2.7.1.15 |
Environmental Temperature probe 3 LOW trap SET notification |
||
slave_Set_environmental_Temp3High | 1.3.6.1.4.1.38218.2.7.1.16 |
Environmental Temperature probe 3 HIGH trap SET notification |
||
slave_Set_environmental_Temp4Low | 1.3.6.1.4.1.38218.2.7.1.17 |
Environmental Temperature probe 4 LOW trap SET notification |
||
slave_Set_environmental_Temp4High | 1.3.6.1.4.1.38218.2.7.1.18 |
Environmental Temperature probe 4 HIGH trap SET notification |
||
slave_Set_environmental_Temp5Low | 1.3.6.1.4.1.38218.2.7.1.19 |
Environmental Temperature probe 5 LOW trap SET notification |
||
slave_Set_environmental_Temp5High | 1.3.6.1.4.1.38218.2.7.1.20 |
Environmental Temperature probe 5 HIGH trap SET notification |
||
slave_Set_environmental_Temp6Low | 1.3.6.1.4.1.38218.2.7.1.21 |
Environmental Temperature probe 6 LOW trap SET notification |
||
slave_Set_environmental_Temp6High | 1.3.6.1.4.1.38218.2.7.1.22 |
Environmental Temperature probe 6 HIGH trap SET notification |
||
slave_Set_environmental_Temp7Low | 1.3.6.1.4.1.38218.2.7.1.23 |
Environmental Temperature probe 7 LOW trap SET notification |
||
slave_Set_environmental_Temp7High | 1.3.6.1.4.1.38218.2.7.1.24 |
Environmental Temperature probe 7 HIGH trap SET notification |
||
slave_Set_environmental_Temp8Low | 1.3.6.1.4.1.38218.2.7.1.25 |
Environmental Temperature probe 8 LOW trap SET notification |
||
slave_Set_environmental_Temp8High | 1.3.6.1.4.1.38218.2.7.1.26 |
Environmental Temperature probe 8 HIGH trap SET notification |
||
slave_Set_environmental_HumidityTempLow | 1.3.6.1.4.1.38218.2.7.1.27 |
Environmental Humidity probe Temperature LOW trap SET notification |
||
slave_Set_environmental_HumidityTempHigh | 1.3.6.1.4.1.38218.2.7.1.28 |
Environmental Humidity probe Temperature HIGH trap SET notification |
||
slave_Set_environmental_HumidityLow | 1.3.6.1.4.1.38218.2.7.1.29 |
Environmental Humidity probe LOW trap SET notification |
||
slave_Set_environmental_HumidityHigh | 1.3.6.1.4.1.38218.2.7.1.30 |
Environmental Humidity probe HIGH trap SET notification |
||
slave_Set_environmental_Contact1Open | 1.3.6.1.4.1.38218.2.7.1.31 |
Environmental Contact 1 OPEN trap SET notification |
||
slave_Set_environmental_Contact1Closed | 1.3.6.1.4.1.38218.2.7.1.32 |
Environmental Contact 1 CLOSED trap SET notification |
||
slave_Set_environmental_Contact2Open | 1.3.6.1.4.1.38218.2.7.1.33 |
Environmental Contact 2 OPEN trap SET notification |
||
slave_Set_environmental_Contact2Closed | 1.3.6.1.4.1.38218.2.7.1.34 |
Environmental Contact 2 CLOSED trap SET notification |
||
slave_Set_environmental_Contact3Open | 1.3.6.1.4.1.38218.2.7.1.35 |
Environmental Contact 3 OPEN trap SET notification |
||
slave_Set_environmental_Contact3Closed | 1.3.6.1.4.1.38218.2.7.1.36 |
Environmental Contact 3 CLOSED trap SET notification |
||
slave_Set_Security_DoorOpen | 1.3.6.1.4.1.38218.2.7.1.37 |
Environmental Door OPEN trap SET notification |
||
slave_Set_Security_DoorClosed | 1.3.6.1.4.1.38218.2.7.1.38 |
Environmental Door CLOSED trap SET notification |
||
slave_Set_Security_LockUnlocked | 1.3.6.1.4.1.38218.2.7.1.39 |
Environmental Lock UNLOCKED trap SET notification |
||
slave_Set_Security_LockLocked | 1.3.6.1.4.1.38218.2.7.1.40 |
Environmental Lock LOCKED trap SET notification |
||
slave_Set_pduOffline | 1.3.6.1.4.1.38218.2.7.1.41 |
pdu OFFLINE trap SET notification |
||
slave_Set_meter1_PFLow | 1.3.6.1.4.1.38218.2.7.1.42 |
Meter 1 Power Factor LOW trap SET notification |
||
slave_Set_meter1_PFHigh | 1.3.6.1.4.1.38218.2.7.1.43 |
Meter 1 Power Factor HIGH trap SET notification |
||
slave_Set_meter1_FreqLow | 1.3.6.1.4.1.38218.2.7.1.44 |
Meter 1 Frequency LOW trap SET notification |
||
slave_Set_meter1_FreqHigh | 1.3.6.1.4.1.38218.2.7.1.45 |
Meter 1 Frequency HIGH trap SET notification |
||
slave_Set_meter2_VRMSLow | 1.3.6.1.4.1.38218.2.7.1.46 |
Meter 2 Voltage LOW trap SET notification |
||
slave_Set_meter2_VRMSHigh | 1.3.6.1.4.1.38218.2.7.1.47 |
Meter 2 Voltage HIGH trap SET notification |
||
slave_Set_meter2_IRMSLow | 1.3.6.1.4.1.38218.2.7.1.48 |
Meter 2 Amps LOW trap SET notification |
||
slave_Set_meter2_IRMSHigh | 1.3.6.1.4.1.38218.2.7.1.49 |
Meter 2 Amps HIGH trap SET notification |
||
slave_Set_meter2_KWSLow | 1.3.6.1.4.1.38218.2.7.1.50 |
Meter 2 Kilowatts LOW trap SET notification |
||
slave_Set_meter2_KWSHigh | 1.3.6.1.4.1.38218.2.7.1.51 |
Meter 2 Kilowatts HIGH trap SET notification |
||
slave_Set_meter2_TempLow | 1.3.6.1.4.1.38218.2.7.1.52 |
Meter 2 Temperature LOW trap SET notification |
||
slave_Set_meter2_TempHigh | 1.3.6.1.4.1.38218.2.7.1.53 |
Meter 2 Temperature HIGH trap SET notification |
||
slave_Set_meter2_PFLow | 1.3.6.1.4.1.38218.2.7.1.54 |
Meter 2 Power Factor LOW trap SET notification |
||
slave_Set_meter2_PFHigh | 1.3.6.1.4.1.38218.2.7.1.55 |
Meter 2 Power Factor HIGH trap SET notification |
||
slave_Set_meter2_FreqLow | 1.3.6.1.4.1.38218.2.7.1.56 |
Meter 2 Frequency LOW trap SET notification |
||
slave_Set_meter2_FreqHigh | 1.3.6.1.4.1.38218.2.7.1.57 |
Meter 2 Frequency HIGH trap SET notification |
||
slave_Set_meter3_VRMSLow | 1.3.6.1.4.1.38218.2.7.1.58 |
Meter 3 Voltage LOW trap SET notification |
||
slave_Set_meter3_VRMSHigh | 1.3.6.1.4.1.38218.2.7.1.59 |
Meter 3 Voltage HIGH trap SET notification |
||
slave_Set_meter3_IRMSLow | 1.3.6.1.4.1.38218.2.7.1.60 |
Meter 3 Amps LOW trap SET notification |
||
slave_Set_meter3_IRMSHigh | 1.3.6.1.4.1.38218.2.7.1.61 |
Meter 3 Amps HIGH trap SET notification |
||
slave_Set_meter3_KWSLow | 1.3.6.1.4.1.38218.2.7.1.62 |
Meter 3 Kilowatts LOW trap SET notification |
||
slave_Set_meter3_KWSHigh | 1.3.6.1.4.1.38218.2.7.1.63 |
Meter 3 Kilowatts HIGH trap SET notification |
||
slave_Set_meter3_TempLow | 1.3.6.1.4.1.38218.2.7.1.64 |
Meter 3 Temperature LOW trap SET notification |
||
slave_Set_meter3_TempHigh | 1.3.6.1.4.1.38218.2.7.1.65 |
Meter 3 Temperature HIGH trap SET notification |
||
slave_Set_meter3_PFLow | 1.3.6.1.4.1.38218.2.7.1.66 |
Meter 3 Power Factor LOW trap SET notification |
||
slave_Set_meter3_PFHigh | 1.3.6.1.4.1.38218.2.7.1.67 |
Meter 3 Power Factor HIGH trap SET notification |
||
slave_Set_meter3_FreqLow | 1.3.6.1.4.1.38218.2.7.1.68 |
Meter 3 Frequency LOW trap SET notification |
||
slave_Set_meter3_FreqHigh | 1.3.6.1.4.1.38218.2.7.1.69 |
Meter 3 Frequency HIGH trap SET notification |
||
slave_TrapClearNotifications | 1.3.6.1.4.1.38218.2.7.2 | |||
slave_Clear_meter1_VRMSLow | 1.3.6.1.4.1.38218.2.7.2.1 |
Meter 1 Voltage LOW trap CLEAR notification |
||
slave_Clear_meter1_VRMSHigh | 1.3.6.1.4.1.38218.2.7.2.2 |
Meter 1 Voltage HIGH trap CLEAR notification |
||
slave_Clear_meter1_IRMSLow | 1.3.6.1.4.1.38218.2.7.2.3 |
Meter 1 Amps LOW trap CLEAR notification |
||
slave_Clear_meter1_IRMSHigh | 1.3.6.1.4.1.38218.2.7.2.4 |
Meter 1 Amps HIGH trap CLEAR notification |
||
slave_Clear_meter1_KWSLow | 1.3.6.1.4.1.38218.2.7.2.5 |
Meter 1 Kilowatts LOW trap CLEAR notification |
||
slave_Clear_meter1_KWSHigh | 1.3.6.1.4.1.38218.2.7.2.6 |
Meter 1 Kilowatts HIGH trap CLEAR notification |
||
slave_Clear_meter1_TempLow | 1.3.6.1.4.1.38218.2.7.2.7 |
Meter 1 Temperature LOW trap CLEAR notification |
||
slave_Clear_meter1_TempHigh | 1.3.6.1.4.1.38218.2.7.2.8 |
Meter 1 Temperature HIGH trap CLEAR notification |
||
slave_Clear_socket_AMPSLow | 1.3.6.1.4.1.38218.2.7.2.9 |
socket Amps LOW trap CLEAR notification |
||
slave_Clear_socket_AMPSHigh | 1.3.6.1.4.1.38218.2.7.2.10 |
socket Amps HIGH trap CLEAR notification |
||
slave_Clear_environmental_Temp1Low | 1.3.6.1.4.1.38218.2.7.2.11 |
Environmental Temperature probe 1 LOW trap CLEAR notification |
||
slave_Clear_environmental_Temp1High | 1.3.6.1.4.1.38218.2.7.2.12 |
Environmental Temperature probe 1 HIGH trap CLEAR notification |
||
slave_Clear_environmental_Temp2Low | 1.3.6.1.4.1.38218.2.7.2.13 |
Environmental Temperature probe 2 LOW trap CLEAR notification |
||
slave_Clear_environmental_Temp2High | 1.3.6.1.4.1.38218.2.7.2.14 |
Environmental Temperature probe 2 HIGH trap CLEAR notification |
||
slave_Clear_environmental_Temp3Low | 1.3.6.1.4.1.38218.2.7.2.15 |
Environmental Temperature probe 3 LOW trap CLEAR notification |
||
slave_Clear_environmental_Temp3High | 1.3.6.1.4.1.38218.2.7.2.16 |
Environmental Temperature probe 3 HIGH trap CLEAR notification |
||
slave_Clear_environmental_Temp4Low | 1.3.6.1.4.1.38218.2.7.2.17 |
Environmental Temperature probe 4 LOW trap CLEAR notification |
||
slave_Clear_environmental_Temp4High | 1.3.6.1.4.1.38218.2.7.2.18 |
Environmental Temperature probe 4 HIGH trap CLEAR notification |
||
slave_Clear_environmental_Temp5Low | 1.3.6.1.4.1.38218.2.7.2.19 |
Environmental Temperature probe 5 LOW trap CLEAR notification |
||
slave_Clear_environmental_Temp5High | 1.3.6.1.4.1.38218.2.7.2.20 |
Environmental Temperature probe 5 HIGH trap CLEAR notification |
||
slave_Clear_environmental_Temp6Low | 1.3.6.1.4.1.38218.2.7.2.21 |
Environmental Temperature probe 6 LOW trap CLEAR notification |
||
slave_Clear_environmental_Temp6High | 1.3.6.1.4.1.38218.2.7.2.22 |
Environmental Temperature probe 6 HIGH trap CLEAR notification |
||
slave_Clear_environmental_Temp7Low | 1.3.6.1.4.1.38218.2.7.2.23 |
Environmental Temperature probe 7 LOW trap CLEAR notification |
||
slave_Clear_environmental_Temp7High | 1.3.6.1.4.1.38218.2.7.2.24 |
Environmental Temperature probe 7 HIGH trap CLEAR notification |
||
slave_Clear_environmental_Temp8Low | 1.3.6.1.4.1.38218.2.7.2.25 |
Environmental Temperature probe 8 LOW trap CLEAR notification |
||
slave_Clear_environmental_Temp8High | 1.3.6.1.4.1.38218.2.7.2.26 |
Environmental Temperature probe 8 HIGH trap CLEAR notification |
||
slave_Clear_environmental_HumidityTempLow | 1.3.6.1.4.1.38218.2.7.2.27 |
Environmental Humidity probe Temperature LOW trap CLEAR notification |
||
slave_Clear_environmental_HumidityTempHigh | 1.3.6.1.4.1.38218.2.7.2.28 |
Environmental Humidity probe Temperature HIGH trap CLEAR notification |
||
slave_Clear_environmental_HumidityLow | 1.3.6.1.4.1.38218.2.7.2.29 |
Environmental Humidity probe LOW trap CLEAR notification |
||
slave_Clear_environmental_HumidityHigh | 1.3.6.1.4.1.38218.2.7.2.30 |
Environmental Humidity probe HIGH trap CLEAR notification |
||
slave_Clear_environmental_Contact1Open | 1.3.6.1.4.1.38218.2.7.2.31 |
Environmental Contact 1 OPEN trap CLEAR notification |
||
slave_Clear_environmental_Contact1Closed | 1.3.6.1.4.1.38218.2.7.2.32 |
Environmental Contact 1 CLOSED trap CLEAR notification |
||
slave_Clear_environmental_Contact2Open | 1.3.6.1.4.1.38218.2.7.2.33 |
Environmental Contact 2 OPEN trap CLEAR notification |
||
slave_Clear_environmental_Contact2Closed | 1.3.6.1.4.1.38218.2.7.2.34 |
Environmental Contact 2 CLOSED trap CLEAR notification |
||
slave_Clear_environmental_Contact3Open | 1.3.6.1.4.1.38218.2.7.2.35 |
Environmental Contact 3 OPEN trap CLEAR notification |
||
slave_Clear_environmental_Contact3Closed | 1.3.6.1.4.1.38218.2.7.2.36 |
Environmental Contact 3 CLOSED trap CLEAR notification |
||
slave_Clear_Security_DoorOpen | 1.3.6.1.4.1.38218.2.7.2.37 |
Environmental Door OPEN trap CLEAR notification |
||
slave_Clear_Security_DoorClosed | 1.3.6.1.4.1.38218.2.7.2.38 |
Environmental Door CLOSED trap CLEAR notification |
||
slave_Clear_Security_LockUnlocked | 1.3.6.1.4.1.38218.2.7.2.39 |
Environmental Lock UNLOCKED trap CLEAR notification |
||
slave_Clear_Security_LockLocked | 1.3.6.1.4.1.38218.2.7.2.40 |
Environmental Lock LOCKED trap CLEAR notification |
||
slave_Clear_pduOffline | 1.3.6.1.4.1.38218.2.7.2.41 |
pdu OFFLINE trap CLEAR notification |
||
slave_Clear_meter1_PFLow | 1.3.6.1.4.1.38218.2.7.2.42 |
Meter 1 Power Factor LOW trap CLEAR notification |
||
slave_Clear_meter1_PFHigh | 1.3.6.1.4.1.38218.2.7.2.43 |
Meter 1 Power Factor HIGH trap CLEAR notification |
||
slave_Clear_meter1_FreqLow | 1.3.6.1.4.1.38218.2.7.2.44 |
Meter 1 Frequency LOW trap CLEAR notification |
||
slave_Clear_meter1_FreqHigh | 1.3.6.1.4.1.38218.2.7.2.45 |
Meter 1 Frequency HIGH trap CLEAR notification |
||
slave_Clear_meter2_VRMSLow | 1.3.6.1.4.1.38218.2.7.2.46 |
Meter 2 Voltage LOW trap CLEAR notification |
||
slave_Clear_meter2_VRMSHigh | 1.3.6.1.4.1.38218.2.7.2.47 |
Meter 2 Voltage HIGH trap CLEAR notification |
||
slave_Clear_meter2_IRMSLow | 1.3.6.1.4.1.38218.2.7.2.48 |
Meter 2 Amps LOW trap CLEAR notification |
||
slave_Clear_meter2_IRMSHigh | 1.3.6.1.4.1.38218.2.7.2.49 |
Meter 2 Amps HIGH trap CLEAR notification |
||
slave_Clear_meter2_KWSLow | 1.3.6.1.4.1.38218.2.7.2.50 |
Meter 2 Kilowatts LOW trap CLEAR notification |
||
slave_Clear_meter2_KWSHigh | 1.3.6.1.4.1.38218.2.7.2.51 |
Meter 2 Kilowatts HIGH trap CLEAR notification |
||
slave_Clear_meter2_TempLow | 1.3.6.1.4.1.38218.2.7.2.52 |
Meter 2 Temperature LOW trap CLEAR notification |
||
slave_Clear_meter2_TempHigh | 1.3.6.1.4.1.38218.2.7.2.53 |
Meter 2 Temperature HIGH trap CLEAR notification |
||
slave_Clear_meter2_PFLow | 1.3.6.1.4.1.38218.2.7.2.54 |
Meter 2 Power Factor LOW trap CLEAR notification |
||
slave_Clear_meter2_PFHigh | 1.3.6.1.4.1.38218.2.7.2.55 |
Meter 2 Power Factor HIGH trap CLEAR notification |
||
slave_Clear_meter2_FreqLow | 1.3.6.1.4.1.38218.2.7.2.56 |
Meter 2 Frequency LOW trap CLEAR notification |
||
slave_Clear_meter2_FreqHigh | 1.3.6.1.4.1.38218.2.7.2.57 |
Meter 2 Frequency HIGH trap CLEAR notification |
||
slave_Clear_meter3_VRMSLow | 1.3.6.1.4.1.38218.2.7.2.58 |
Meter 3 Voltage LOW trap CLEAR notification |
||
slave_Clear_meter3_VRMSHigh | 1.3.6.1.4.1.38218.2.7.2.59 |
Meter 3 Voltage HIGH trap CLEAR notification |
||
slave_Clear_meter3_IRMSLow | 1.3.6.1.4.1.38218.2.7.2.60 |
Meter 3 Amps LOW trap CLEAR notification |
||
slave_Clear_meter3_IRMSHigh | 1.3.6.1.4.1.38218.2.7.2.61 |
Meter 3 Amps HIGH trap CLEAR notification |
||
slave_Clear_meter3_KWSLow | 1.3.6.1.4.1.38218.2.7.2.62 |
Meter 3 Kilowatts LOW trap CLEAR notification |
||
slave_Clear_meter3_KWSHigh | 1.3.6.1.4.1.38218.2.7.2.63 |
Meter 3 Kilowatts HIGH trap CLEAR notification |
||
slave_Clear_meter3_TempLow | 1.3.6.1.4.1.38218.2.7.2.64 |
Meter 3 Temperature LOW trap CLEAR notification |
||
slave_Clear_meter3_TempHigh | 1.3.6.1.4.1.38218.2.7.2.65 |
Meter 3 Temperature HIGH trap CLEAR notification |
||
slave_Clear_meter3_PFLow | 1.3.6.1.4.1.38218.2.7.2.66 |
Meter 3 Power Factor LOW trap CLEAR notification |
||
slave_Clear_meter3_PFHigh | 1.3.6.1.4.1.38218.2.7.2.67 |
Meter 3 Power Factor HIGH trap CLEAR notification |
||
slave_Clear_meter3_FreqLow | 1.3.6.1.4.1.38218.2.7.2.68 |
Meter 3 Frequency LOW trap CLEAR notification |
||
slave_Clear_meter3_FreqHigh | 1.3.6.1.4.1.38218.2.7.2.69 |
Meter 3 Frequency HIGH trap CLEAR notification |
||
slave_Global | 1.3.6.1.4.1.38218.3 | |||
slave_Global_Table | 1.3.6.1.4.1.38218.3.1 | no-access | ||
1.3.6.1.4.1.38218.3.1.1 | no-access |
Table of Trap notification destinations. |
||
slave_Global_Index | 1.3.6.1.4.1.38218.3.1.1.1 | integer | no-access |
pdu index [0..Nopdus]. |
slave_Global_Status | 1.3.6.1.4.1.38218.3.1.1.2 | integer | read-write |
Compatible - pdu ONLINE / OFFLINE or DISABLED status. Enumeration: 'disabled': 2, 'offline': 0, 'online': 1. |
slave_Global_Address | 1.3.6.1.4.1.38218.3.1.1.3 | integer | read-only |
Compatible - pdu MODBUS Address. |
slave_Global_Nosockets | 1.3.6.1.4.1.38218.3.1.1.4 | integer | read-only |
Compatible - pdu Number of sockets. |
slave_Global_meter1_VRMS | 1.3.6.1.4.1.38218.3.1.1.5 | integer | read-only |
Compatible - Meter 1 RMS Voltage (VAC) x10. |
slave_Global_meter1_IRMS | 1.3.6.1.4.1.38218.3.1.1.6 | integer | read-only |
Compatible - Meter 1 RMS Current (A) x10. |
slave_Global_meter1_KWH | 1.3.6.1.4.1.38218.3.1.1.7 | integer32 | read-only |
Compatible - Meter 1 Total energy consumption (kW/h) x10. |
slave_Global_meter1_KW | 1.3.6.1.4.1.38218.3.1.1.8 | integer32 | read-only |
Compatible - Meter 1 Kilowatts (kW) x1000. |
slave_Global_meter1_TPMU | 1.3.6.1.4.1.38218.3.1.1.9 | integer | read-only |
Compatible - Meter 1 Internal Temperature (C) x10. |
slave_Global_meter1_PF | 1.3.6.1.4.1.38218.3.1.1.10 | integer | read-only |
Compatible - Meter 1 Power Factor x1000 |
slave_Global_environmental_Temp1 | 1.3.6.1.4.1.38218.3.1.1.11 | integer | read-only |
Compatible - Environmental Temperature probe 1 (C) x100. |
slave_Global_environmental_Temp2 | 1.3.6.1.4.1.38218.3.1.1.12 | integer | read-only |
Compatible - Environmental Temperature probe 2 (C) x100. |
slave_Global_environmental_Temp3 | 1.3.6.1.4.1.38218.3.1.1.13 | integer | read-only |
Compatible - Environmental Temperature probe 3 (C) x100. |
slave_Global_environmental_Temp4 | 1.3.6.1.4.1.38218.3.1.1.14 | integer | read-only |
Compatible - Environmental Temperature probe 4 (C) x100. |
slave_Global_environmental_Temp5 | 1.3.6.1.4.1.38218.3.1.1.15 | integer | read-only |
Compatible - Environmental Temperature probe 5 (C) x100. |
slave_Global_environmental_Temp6 | 1.3.6.1.4.1.38218.3.1.1.16 | integer | read-only |
Compatible - Environmental Temperature probe 6 (C) x100. |
slave_Global_environmental_Temp7 | 1.3.6.1.4.1.38218.3.1.1.17 | integer | read-only |
Compatible - Environmental Temperature probe 7 (C) x100. |
slave_Global_environmental_Temp8 | 1.3.6.1.4.1.38218.3.1.1.18 | integer | read-only |
Compatible - Environmental Temperature probe 8 (C) x100. |
slave_Global_environmental_HumidityTemp | 1.3.6.1.4.1.38218.3.1.1.19 | integer | read-only |
Compatible - Environmental Humidity probe Temperature (C) x100. |
slave_Global_environmental_Humidity | 1.3.6.1.4.1.38218.3.1.1.20 | integer | read-only |
Compatible - Environmental humidity probe (%) x100. |
slave_Global_environmental_Contact1 | 1.3.6.1.4.1.38218.3.1.1.21 | integer | read-write |
Compatible - Environmental contact input 1 status. Set with any data to clear status. Enumeration: 'none': 3, 'open': 0, 'closed': 1. |
slave_Global_environmental_Contact2 | 1.3.6.1.4.1.38218.3.1.1.22 | integer | read-write |
Compatible - Environmental contact input 2 status. Set with any data to clear status. Enumeration: 'open': 0, 'closed': 1. |
slave_Global_environmental_Contact3 | 1.3.6.1.4.1.38218.3.1.1.23 | integer | read-write |
Compatible - Environmental contact input 3 status. Set with any data to clear status. Enumeration: 'open': 0, 'closed': 1. |
slave_Global_Security_Door | 1.3.6.1.4.1.38218.3.1.1.24 | integer | read-only |
Compatible - Environmental door contact status. Enumeration: 'open': 0, 'closed': 1. |
slave_Global_Security_Lock | 1.3.6.1.4.1.38218.3.1.1.25 | integer | read-write |
Compatible - Environmental lock status. Set with any data to force unlock. Enumeration: 'locked': 0, 'unlocked': 1. |
slave_Global_sockets | 1.3.6.1.4.1.38218.3.1.1.26 | integer32 | read-write |
Compatible - socket status bits 1 to 32 Set or clear bit to control socket, Bit 0 = socket 1, Bit 31 = socket 32 |
slave_Global_socket1Amps | 1.3.6.1.4.1.38218.3.1.1.27 | integer | read-only |
Compatible - socket Amps value x10. |
slave_Global_socket2Amps | 1.3.6.1.4.1.38218.3.1.1.28 | integer | read-only |
Compatible - socket Amps value x10. |
slave_Global_socket3Amps | 1.3.6.1.4.1.38218.3.1.1.29 | integer | read-only |
Compatible - socket Amps value x10. |
slave_Global_socket4Amps | 1.3.6.1.4.1.38218.3.1.1.30 | integer | read-only |
Compatible - socket Amps value x10. |
slave_Global_socket5Amps | 1.3.6.1.4.1.38218.3.1.1.31 | integer | read-only |
Compatible - socket Amps value x10. |
slave_Global_socket6Amps | 1.3.6.1.4.1.38218.3.1.1.32 | integer | read-only |
Compatible - socket Amps value x10. |
slave_Global_socket7Amps | 1.3.6.1.4.1.38218.3.1.1.33 | integer | read-only |
Compatible - socket Amps value x10. |
slave_Global_socket8Amps | 1.3.6.1.4.1.38218.3.1.1.34 | integer | read-only |
Compatible - socket Amps value x10. |
slave_Global_socket9Amps | 1.3.6.1.4.1.38218.3.1.1.35 | integer | read-only |
Compatible - socket Amps value x10. |
slave_Global_socket10Amps | 1.3.6.1.4.1.38218.3.1.1.36 | integer | read-only |
Compatible - socket Amps value x10. |
slave_Global_socket11Amps | 1.3.6.1.4.1.38218.3.1.1.37 | integer | read-only |
Compatible - socket Amps value x10. |
slave_Global_socket12Amps | 1.3.6.1.4.1.38218.3.1.1.38 | integer | read-only |
Compatible - socket Amps value x10. |
slave_Global_socket13Amps | 1.3.6.1.4.1.38218.3.1.1.39 | integer | read-only |
Compatible - socket Amps value x10. |
slave_Global_socket14Amps | 1.3.6.1.4.1.38218.3.1.1.40 | integer | read-only |
Compatible - socket Amps value x10. |
slave_Global_socket15Amps | 1.3.6.1.4.1.38218.3.1.1.41 | integer | read-only |
Compatible - socket Amps value x10. |
slave_Global_socket16Amps | 1.3.6.1.4.1.38218.3.1.1.42 | integer | read-only |
Compatible - socket Amps value x10. |
slave_Global_socket17Amps | 1.3.6.1.4.1.38218.3.1.1.43 | integer | read-only |
Compatible - socket Amps value x10. |
slave_Global_socket18Amps | 1.3.6.1.4.1.38218.3.1.1.44 | integer | read-only |
Compatible - socket Amps value x10. |
slave_Global_socket19Amps | 1.3.6.1.4.1.38218.3.1.1.45 | integer | read-only |
Compatible - socket Amps value x10. |
slave_Global_socket20Amps | 1.3.6.1.4.1.38218.3.1.1.46 | integer | read-only |
Compatible - socket Amps value x10. |
slave_Global_socket21Amps | 1.3.6.1.4.1.38218.3.1.1.47 | integer | read-only |
Compatible - socket Amps value x10. |
slave_Global_socket22Amps | 1.3.6.1.4.1.38218.3.1.1.48 | integer | read-only |
Compatible - socket Amps value x10. |
slave_Global_socket23Amps | 1.3.6.1.4.1.38218.3.1.1.49 | integer | read-only |
Compatible - socket Amps value x10. |
slave_Global_socket24Amps | 1.3.6.1.4.1.38218.3.1.1.50 | integer | read-only |
Compatible - socket Amps value x10. |
slave_Global_socket25Amps | 1.3.6.1.4.1.38218.3.1.1.51 | integer | read-only |
Compatible - socket Amps value x10. |
slave_Global_socket26Amps | 1.3.6.1.4.1.38218.3.1.1.52 | integer | read-only |
Compatible - socket Amps value x10. |
slave_Global_socket27Amps | 1.3.6.1.4.1.38218.3.1.1.53 | integer | read-only |
Compatible - socket Amps value x10. |
slave_Global_socket28Amps | 1.3.6.1.4.1.38218.3.1.1.54 | integer | read-only |
Compatible - socket Amps value x10. |
slave_Global_socket29Amps | 1.3.6.1.4.1.38218.3.1.1.55 | integer | read-only |
Compatible - socket Amps value x10. |
slave_Global_socket30Amps | 1.3.6.1.4.1.38218.3.1.1.56 | integer | read-only |
Compatible - socket Amps value x10. |
slave_Global_socket31Amps | 1.3.6.1.4.1.38218.3.1.1.57 | integer | read-only |
Compatible - socket Amps value x10. |
slave_Global_socket32Amps | 1.3.6.1.4.1.38218.3.1.1.58 | integer | read-only |
Compatible - socket Amps value x10. |
slave_Global_socket1kWh | 1.3.6.1.4.1.38218.3.1.1.59 | integer32 | read-only |
Compatible - socket kWh value x10. |
slave_Global_socket2kWh | 1.3.6.1.4.1.38218.3.1.1.60 | integer32 | read-only |
Compatible - socket kWh value x10. |
slave_Global_socket3kWh | 1.3.6.1.4.1.38218.3.1.1.61 | integer32 | read-only |
Compatible - socket kWh value x10. |
slave_Global_socket4kWh | 1.3.6.1.4.1.38218.3.1.1.62 | integer32 | read-only |
Compatible - socket kWh value x10. |
slave_Global_socket5kWh | 1.3.6.1.4.1.38218.3.1.1.63 | integer32 | read-only |
Compatible - socket kWh value x10. |
slave_Global_socket6kWh | 1.3.6.1.4.1.38218.3.1.1.64 | integer32 | read-only |
Compatible - socket kWh value x10. |
slave_Global_socket7kWh | 1.3.6.1.4.1.38218.3.1.1.65 | integer32 | read-only |
Compatible - socket kWh value x10. |
slave_Global_socket8kWh | 1.3.6.1.4.1.38218.3.1.1.66 | integer32 | read-only |
Compatible - socket kWh value x10. |
slave_Global_socket9kWh | 1.3.6.1.4.1.38218.3.1.1.67 | integer32 | read-only |
Compatible - socket kWh value x10. |
slave_Global_socket10kWh | 1.3.6.1.4.1.38218.3.1.1.68 | integer32 | read-only |
Compatible - socket kWh value x10. |
slave_Global_socket11kWh | 1.3.6.1.4.1.38218.3.1.1.69 | integer32 | read-only |
Compatible - socket kWh value x10. |
slave_Global_socket12kWh | 1.3.6.1.4.1.38218.3.1.1.70 | integer32 | read-only |
Compatible - socket kWh value x10. |
slave_Global_socket13kWh | 1.3.6.1.4.1.38218.3.1.1.71 | integer32 | read-only |
Compatible - socket kWh value x10. |
slave_Global_socket14kWh | 1.3.6.1.4.1.38218.3.1.1.72 | integer32 | read-only |
Compatible - socket kWh value x10. |
slave_Global_socket15kWh | 1.3.6.1.4.1.38218.3.1.1.73 | integer32 | read-only |
Compatible - socket kWh value x10. |
slave_Global_socket16kWh | 1.3.6.1.4.1.38218.3.1.1.74 | integer32 | read-only |
Compatible - socket kWh value x10. |
slave_Global_socket17kWh | 1.3.6.1.4.1.38218.3.1.1.75 | integer32 | read-only |
Compatible - socket kWh value x10. |
slave_Global_socket18kWh | 1.3.6.1.4.1.38218.3.1.1.76 | integer32 | read-only |
Compatible - socket kWh value x10. |
slave_Global_socket19kWh | 1.3.6.1.4.1.38218.3.1.1.77 | integer32 | read-only |
Compatible - socket kWh value x10. |
slave_Global_socket20kWh | 1.3.6.1.4.1.38218.3.1.1.78 | integer32 | read-only |
Compatible - socket kWh value x10. |
slave_Global_socket21kWh | 1.3.6.1.4.1.38218.3.1.1.79 | integer32 | read-only |
Compatible - socket kWh value x10. |
slave_Global_socket22kWh | 1.3.6.1.4.1.38218.3.1.1.80 | integer32 | read-only |
Compatible - socket kWh value x10. |
slave_Global_socket23kWh | 1.3.6.1.4.1.38218.3.1.1.81 | integer32 | read-only |
Compatible - socket kWh value x10. |
slave_Global_socket24kWh | 1.3.6.1.4.1.38218.3.1.1.82 | integer32 | read-only |
Compatible - socket kWh value x10. |
slave_Global_socket25kWh | 1.3.6.1.4.1.38218.3.1.1.83 | integer32 | read-only |
Compatible - socket kWh value x10. |
slave_Global_socket26kWh | 1.3.6.1.4.1.38218.3.1.1.84 | integer32 | read-only |
Compatible - socket kWh value x10. |
slave_Global_socket27kWh | 1.3.6.1.4.1.38218.3.1.1.85 | integer32 | read-only |
Compatible - socket kWh value x10. |
slave_Global_socket28kWh | 1.3.6.1.4.1.38218.3.1.1.86 | integer32 | read-only |
Compatible - socket kWh value x10. |
slave_Global_socket29kWh | 1.3.6.1.4.1.38218.3.1.1.87 | integer32 | read-only |
Compatible - socket kWh value x10. |
slave_Global_socket30kWh | 1.3.6.1.4.1.38218.3.1.1.88 | integer32 | read-only |
Compatible - socket kWh value x10. |
slave_Global_socket31kWh | 1.3.6.1.4.1.38218.3.1.1.89 | integer32 | read-only |
Compatible - socket kWh value x10. |
slave_Global_socket32kWh | 1.3.6.1.4.1.38218.3.1.1.90 | integer32 | read-only |
Compatible - socket kWh value x10. |
slave_Global_socket33Amps | 1.3.6.1.4.1.38218.3.1.1.91 | integer | read-only |
socket Amps value x10. |
slave_Global_socket34Amps | 1.3.6.1.4.1.38218.3.1.1.92 | integer | read-only |
socket Amps value x10. |
slave_Global_socket35Amps | 1.3.6.1.4.1.38218.3.1.1.93 | integer | read-only |
socket Amps value x10. |
slave_Global_socket36Amps | 1.3.6.1.4.1.38218.3.1.1.94 | integer | read-only |
socket Amps value x10. |
slave_Global_socket37Amps | 1.3.6.1.4.1.38218.3.1.1.95 | integer | read-only |
socket Amps value x10. |
slave_Global_socket38Amps | 1.3.6.1.4.1.38218.3.1.1.96 | integer | read-only |
socket Amps value x10. |
slave_Global_socket39Amps | 1.3.6.1.4.1.38218.3.1.1.97 | integer | read-only |
socket Amps value x10. |
slave_Global_socket40Amps | 1.3.6.1.4.1.38218.3.1.1.98 | integer | read-only |
socket Amps value x10. |
slave_Global_socket41Amps | 1.3.6.1.4.1.38218.3.1.1.99 | integer | read-only |
socket Amps value x10. |
slave_Global_socket42Amps | 1.3.6.1.4.1.38218.3.1.1.100 | integer | read-only |
socket Amps value x10. |
slave_Global_socket43Amps | 1.3.6.1.4.1.38218.3.1.1.101 | integer | read-only |
socket Amps value x10. |
slave_Global_socket44Amps | 1.3.6.1.4.1.38218.3.1.1.102 | integer | read-only |
socket Amps value x10. |
slave_Global_socket45Amps | 1.3.6.1.4.1.38218.3.1.1.103 | integer | read-only |
socket Amps value x10. |
slave_Global_socket46Amps | 1.3.6.1.4.1.38218.3.1.1.104 | integer | read-only |
socket Amps value x10. |
slave_Global_socket47Amps | 1.3.6.1.4.1.38218.3.1.1.105 | integer | read-only |
socket Amps value x10. |
slave_Global_socket48Amps | 1.3.6.1.4.1.38218.3.1.1.106 | integer | read-only |
socket Amps value x10. |
slave_Global_socket33kWh | 1.3.6.1.4.1.38218.3.1.1.107 | integer32 | read-only |
socket kWh value x10. |
slave_Global_socket34kWh | 1.3.6.1.4.1.38218.3.1.1.108 | integer32 | read-only |
socket kWh value x10. |
slave_Global_socket35kWh | 1.3.6.1.4.1.38218.3.1.1.109 | integer32 | read-only |
socket kWh value x10. |
slave_Global_socket36kWh | 1.3.6.1.4.1.38218.3.1.1.110 | integer32 | read-only |
socket kWh value x10. |
slave_Global_socket37kWh | 1.3.6.1.4.1.38218.3.1.1.111 | integer32 | read-only |
socket kWh value x10. |
slave_Global_socket38kWh | 1.3.6.1.4.1.38218.3.1.1.112 | integer32 | read-only |
socket kWh value x10. |
slave_Global_socket39kWh | 1.3.6.1.4.1.38218.3.1.1.113 | integer32 | read-only |
socket kWh value x10. |
slave_Global_socket40kWh | 1.3.6.1.4.1.38218.3.1.1.114 | integer32 | read-only |
socket kWh value x10. |
slave_Global_socket41kWh | 1.3.6.1.4.1.38218.3.1.1.115 | integer32 | read-only |
socket kWh value x10. |
slave_Global_socket42kWh | 1.3.6.1.4.1.38218.3.1.1.116 | integer32 | read-only |
socket kWh value x10. |
slave_Global_socket43kWh | 1.3.6.1.4.1.38218.3.1.1.117 | integer32 | read-only |
socket kWh value x10. |
slave_Global_socket44kWh | 1.3.6.1.4.1.38218.3.1.1.118 | integer32 | read-only |
socket kWh value x10. |
slave_Global_socket45kWh | 1.3.6.1.4.1.38218.3.1.1.119 | integer32 | read-only |
socket kWh value x10. |
slave_Global_socket46kWh | 1.3.6.1.4.1.38218.3.1.1.120 | integer32 | read-only |
socket kWh value x10. |
slave_Global_socket47kWh | 1.3.6.1.4.1.38218.3.1.1.121 | integer32 | read-only |
socket kWh value x10. |
slave_Global_socket48kWh | 1.3.6.1.4.1.38218.3.1.1.122 | integer32 | read-only |
socket kWh value x10. |
slave_Global_sockets2 | 1.3.6.1.4.1.38218.3.1.1.123 | integer32 | read-write |
socket status bits 33-48 Set or clear bit to control socket, Bit 0 = socket 33, Bit 15 = socket 48 |
slave_Global_meter1_Freq | 1.3.6.1.4.1.38218.3.1.1.124 | integer | read-only |
Meter 1 Frequency x10 |
slave_Global_meter2_VRMS | 1.3.6.1.4.1.38218.3.1.1.125 | integer | read-only |
Meter 2 RMS Voltage (VAC) x10. |
slave_Global_meter2_IRMS | 1.3.6.1.4.1.38218.3.1.1.126 | integer | read-only |
Meter 2 RMS Current (A) x10. |
slave_Global_meter2_KWH | 1.3.6.1.4.1.38218.3.1.1.127 | integer32 | read-only |
Meter 2 Total energy consumption (kW/h) x10. |
slave_Global_meter2_KW | 1.3.6.1.4.1.38218.3.1.1.128 | integer32 | read-only |
Meter 2 Kilowatts (kW) x1000. |
slave_Global_meter2_TPMU | 1.3.6.1.4.1.38218.3.1.1.129 | integer | read-only |
Meter 2 Internal Temperature (C) x10. |
slave_Global_meter2_PF | 1.3.6.1.4.1.38218.3.1.1.130 | integer | read-only |
Meter 2 Power Factor x1000 |
slave_Global_meter2_Freq | 1.3.6.1.4.1.38218.3.1.1.131 | integer | read-only |
Meter 2 Frequency x10 |
slave_Global_meter3_VRMS | 1.3.6.1.4.1.38218.3.1.1.132 | integer | read-only |
Meter 3 RMS Voltage (VAC) x10. |
slave_Global_meter3_IRMS | 1.3.6.1.4.1.38218.3.1.1.133 | integer | read-only |
Meter 3 RMS Current (A) x10. |
slave_Global_meter3_KWH | 1.3.6.1.4.1.38218.3.1.1.134 | integer32 | read-only |
Meter 3 Total energy consumption (kW/h) x10. |
slave_Global_meter3_KW | 1.3.6.1.4.1.38218.3.1.1.135 | integer32 | read-only |
Meter 3 Kilowatts (kW) x1000. |
slave_Global_meter3_TPMU | 1.3.6.1.4.1.38218.3.1.1.136 | integer | read-only |
Meter 3 Internal Temperature (C) x10. |
slave_Global_meter3_PF | 1.3.6.1.4.1.38218.3.1.1.137 | integer | read-only |
Meter 3 Power Factor x1000 |
slave_Global_meter3_Freq | 1.3.6.1.4.1.38218.3.1.1.138 | integer | read-only |
Meter 3 Frequency x10 |