PDN-MPE-DSLAM-SYSTEM-MIB: View SNMP OID List / Download MIB

VENDOR: PARADYNE


 Home MIB: PDN-MPE-DSLAM-SYSTEM-MIB
Download as:   
SNMPv2-CONF, ENTITY-MIB, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, PDN-TC, PDN-HEADER-MIB, SNMPv2-TC, PDN-MPE-MIB2-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 mpe_dslam 1.3.6.1.4.1.1795.2.24.12.24
The mpe dslam MIB. This MIB is written specifically to extend entPhysicalTable.
       mpeSysDevDslamMIBObjects 1.3.6.1.4.1.1795.2.24.12.24.1
           mpeEntExtAlarms 1.3.6.1.4.1.1795.2.24.12.24.1.1
               mpeEntExtAlarmTable 1.3.6.1.4.1.1795.2.24.12.24.1.1.1 no-access
This table lists the alarm states of the objects listed in the entity-MIB entPhysicalTable.
                   mpeEntExtAlarmEntry 1.3.6.1.4.1.1795.2.24.12.24.1.1.1.1 no-access
An mpeEntExtAlarmTable entry indicates the alarm state of the physical entity.
                       mpeEntExtAlarm 1.3.6.1.4.1.1795.2.24.12.24.1.1.1.1.1 truthvalue read-only
This variable indicates the alarm state of the physical entity.
           mpeAlarmRelay 1.3.6.1.4.1.1795.2.24.12.24.1.2
               mpeAlarmRelayEquipIndex 1.3.6.1.4.1.1795.2.24.12.24.1.2.1 integer32 no-access
This variable is the index of the equipment whose alarms are being relayed. It is a integer number starting from 1 until the max number of physical connectors the DSLAM device has to support relay. NOTE: This object has been deprecated. Please consider using the mpeAlarmRelayTable and mpeAlarmRelayInputStateChanged objects.
               mpeAlarmRelayInputContactState 1.3.6.1.4.1.1795.2.24.12.24.1.2.2 contactstate no-access
This variable indicates the alarm state of the Input Contact (open/closed). NOTE: This object has been deprecated. Please consider using the mpeAlarmRelayTable and mpeAlarmRelayInputStateChanged objects.
               mpeAlarmRelayTable 1.3.6.1.4.1.1795.2.24.12.24.1.2.3 no-access
This table holds objects that relate to Alarm Relay input or output.
                   mpeAlarmRelayEntry 1.3.6.1.4.1.1795.2.24.12.24.1.2.3.1 no-access
An entry in this table is a sparse augmentation of the entPhysicalEntry. As such, it is indexed by the entPhysicalIndex and not an augmentation of the entPhysicalTable.
                       mpeAlarmRelayState 1.3.6.1.4.1.1795.2.24.12.24.1.2.3.1.1 contactstate read-write
This object is used to read or write the state an alarm relay input or output.
           mpeEntExtMibObjects 1.3.6.1.4.1.1795.2.24.12.24.1.3
               mpeEntPhysicalExtTable 1.3.6.1.4.1.1795.2.24.12.24.1.3.1 no-access
This table contains entity information that is not defined in the standard ENTITY-MIB.
                   mpeEntPhysicalExtEntry 1.3.6.1.4.1.1795.2.24.12.24.1.3.1.1 no-access
An entry extends the entPhysicalEntry defined in the ENTITY-MIB.
                       mpeEntPhysicalExtUpTime 1.3.6.1.4.1.1795.2.24.12.24.1.3.1.1.1 timeticks read-only
The time (in hundredths of a second --just like the sysUpTime) since the entity was last re-initialized.
                       mpeEntPhysicalExtLocation 1.3.6.1.4.1.1795.2.24.12.24.1.3.1.1.2 snmpadminstring read-write
This object allows the manager to enter the location of the physical entity where applicable. For example, in a stack, chassis or units may be in different locations. In this case, it would be logical for the manager to set this object to the location of the associated chassis. Where the location doesn't make sense, it is recommended that the object return a zero-length string.
                       mpeEntPhysicalExtAdminStatus 1.3.6.1.4.1.1795.2.24.12.24.1.3.1.1.3 mpeentextadminstatus read-write
The desired state of the entity.
                       mpeEntPhysicalExtOperStatus 1.3.6.1.4.1.1795.2.24.12.24.1.3.1.1.4 mpeentextoperstatus read-only
The current operational state of the entity.
       mpeSysDevDslamMIBTraps 1.3.6.1.4.1.1795.2.24.12.24.2
           mpeSysDevDslamMIBNotifications 1.3.6.1.4.1.1795.2.24.12.24.2.0
               mpeAlarmRelayInputStateChanged 1.3.6.1.4.1.1795.2.24.12.24.2.0.26
This trap signifies that the state of the Alarm Relay Input has changed.
               mpeFanEntityModuleFailure 1.3.6.1.4.1.1795.2.24.12.24.2.0.27
This trap indicates the failure of the fan module on the device.
               mpeFanEntityModuleOperational 1.3.6.1.4.1.1795.2.24.12.24.2.0.28
This trap indicates the indicates the fan module on the device is back to operational.
               mpePowerSourceAFailure 1.3.6.1.4.1.1795.2.24.12.24.2.0.29
This trap indicates that power source A has failed.
               mpePowerSourceBFailure 1.3.6.1.4.1.1795.2.24.12.24.2.0.30
This trap indicates that power source B has failed.
               mpePowerSourceAOperational 1.3.6.1.4.1.1795.2.24.12.24.2.0.31
This trap indicates that the power source A is operational. This trap compliments powerSourceAFailure trap.
               mpePowerSourceBOperational 1.3.6.1.4.1.1795.2.24.12.24.2.0.32
This trap indicates that the power source B is operational. This trap compliments powerSourceBFailure trap.
           mpeCcn 1.3.6.1.4.1.1795.2.24.12.24.2.7
This trap signifies a Configuration change or software upgrade in the xDSL card. This trap is of 'warning' class
           mpeDeviceFailure 1.3.6.1.4.1.1795.2.24.12.24.2.15
This trap signifies that the sending protocol's device has failed and the failure was not a result of a device test. Note there are no variable bindings for this trap
           mpeDeviceFailureCleared 1.3.6.1.4.1.1795.2.24.12.24.2.16
This trap signifies that the sending protocol's device has failed but now it is operational. Failure was not a result of a device test.
           mpeNonSupportedMCC 1.3.6.1.4.1.1795.2.24.12.24.2.20
AN has detected MCC firmware release too low to support this device
           mpeNonSupportedChassis 1.3.6.1.4.1.1795.2.24.12.24.2.21
AN in slot xx has been installed in a chassis that cannot support one or more of its features.
           mpeAlarmRelayInputContactStateChanged 1.3.6.1.4.1.1795.2.24.12.24.2.22
This trap signifies that the state of the InputContact Alarm has changed since last time. NOTE: This object has been deprecated. Please consider using the mpeAlarmRelayInputStateChanged notification.
           mpeEntPhysicalExtEntityCreated 1.3.6.1.4.1.1795.2.24.12.24.2.23
This trap signifies that an instance of this entity has been created in the entPhysicalTable. This trap is generated in addition to the entConfigChange notification defined in RFC2737.
           mpeEntPhysicalExtEntityDeleted 1.3.6.1.4.1.1795.2.24.12.24.2.24
This trap signifies that an instance of this entity has been deleted from the entPhysicalTable. This trap is generated in addition to the entConfigChange notification defined in RFC2737.
           mpeEntPhysicalExtEntityChanged 1.3.6.1.4.1.1795.2.24.12.24.2.25
This trap signifies that an instance of this entity has been modified in the entPhysicalTable as a result of a change in any of the objects in that table. This trap is generated in addition to the entConfigChange notification defined in RFC2737.
       mpeSysDevDslamConformance 1.3.6.1.4.1.1795.2.24.12.24.3
           mpeSysDevDslamGroups 1.3.6.1.4.1.1795.2.24.12.24.3.1
               mpeSysDevDslamAlarmStateGroup 1.3.6.1.4.1.1795.2.24.12.24.3.1.1
The collection of objects which are used to describe alarm states for equipments physically connected to a DSLAM device.
               mpeEntityExtNotificationGroup 1.3.6.1.4.1.1795.2.24.12.24.3.1.2
The collection of objects which are used to notify that trap conditions are met.
               mpeSysDevDslamAlarmRelayGroup 1.3.6.1.4.1.1795.2.24.12.24.3.1.3
The collection of objects which are used for Alarm Relay objects.
               mpeEntPhysicalExtGroup 1.3.6.1.4.1.1795.2.24.12.24.3.1.4
The collection of objects which are used in extending the entPhysicalTable.
               mpeEntPhysicalExtNotificationObjectGroup 1.3.6.1.4.1.1795.2.24.12.24.3.1.5
A collection of objects that are included in the OBJECTS clause of notifications.
               mpeEntityExtPowerFailureNotificationGroup 1.3.6.1.4.1.1795.2.24.12.24.3.1.6
The collection of objects which are used to notify that trap conditions are met.
           mpeSysDevDslamCompliances 1.3.6.1.4.1.1795.2.24.12.24.3.2
               mpeSysDevDslamAlarmCompliances 1.3.6.1.4.1.1795.2.24.12.24.3.2.1
The compliance statement for entities and their alarms states.
               mpeSysDevDslamAlarmDeprecatedCompliances 1.3.6.1.4.1.1795.2.24.12.24.3.2.2
The compliance statement for deprecated groups
           mpeSysDevDslamDeprecatedGroup 1.3.6.1.4.1.1795.2.24.12.24.3.3
               mpeDslamDeprecatedObjectsGroup 1.3.6.1.4.1.1795.2.24.12.24.3.3.1
The collection of objects that have been deprecated.
               mpeDslamDeprecatedNotificationsGroup 1.3.6.1.4.1.1795.2.24.12.24.3.3.2
The collection of traps/notifications that have been deprecated.