PAIRGAIN-ETSI-HDSL-MIB: View SNMP OID List / Download MIB
VENDOR: PAIRGAIN TECHNOLOGIES
Home | MIB: PAIRGAIN-ETSI-HDSL-MIB | |||
---|---|---|---|---|
Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
Object Name | OID | Type | Access | Info |
hdslSpan15mPerformanceTable | 1.3.6.1.4.1.927.1.7.1 | no-access |
This table provides the 15-minute performance history monitoring of the last 24 hours for all HDSL spans Errored Seconds (ES), Severely Errored Seconds (SES) and Unavailable Seconds (UAS). |
|
1.3.6.1.4.1.927.1.7.1.1 | no-access |
Entries of the HDSL span 15-min performance table |
||
hdslSpan15mSlotId | 1.3.6.1.4.1.927.1.7.1.1.1 | integer | read-only |
Identifies the HDSL line occupied in the chassis. The slots are numbered 1 through 16 from left to right. |
hdslSpan15mSpanId | 1.3.6.1.4.1.927.1.7.1.1.2 | integer | read-only |
Identifies the span of the HDSL line we are monitoring. Depending on the number of regenerator(s) (REGs) present in an HDSL loop, a span will be numbered as follows: 0 REG - only 1 span. 1 REG - span between LTU and REG is identified as 1. span between REG and NTU is identified as 2. 2 REGs - span between LTU and REG #1 is identified as 1. span between REG #1 and REG #2 is identified as 2. span between REG #2 and NTU is identified as 3. |
hdslSpan15mHistoryId | 1.3.6.1.4.1.927.1.7.1.1.3 | integer | read-only |
Identify the history ID within the 96 15-minute performance history. |
hdsl15mESLoopANet | 1.3.6.1.4.1.927.1.7.1.1.4 | short | read-only |
HDSL 15-min ES count on Loop A's Network side of the span. |
hdsl15mESLoopBNet | 1.3.6.1.4.1.927.1.7.1.1.5 | short | read-only |
HDSL 15-min ES count on Loop B's Network side of the span. |
hdsl15mUASLoopANet | 1.3.6.1.4.1.927.1.7.1.1.6 | short | read-only |
HDSL 15-min UAS count on Loop A's Network side of the span. |
hdsl15mUASLoopBNet | 1.3.6.1.4.1.927.1.7.1.1.7 | short | read-only |
HDSL 15-min UAS count on Loop B's Network side of the span. |
hdsl15mSESLoopANet | 1.3.6.1.4.1.927.1.7.1.1.8 | short | read-only |
HDSL 15-min SES count on Loop A's Network side of the span. |
hdsl15mSESLoopBNet | 1.3.6.1.4.1.927.1.7.1.1.9 | short | read-only |
HDSL 15-min SES count on Loop B's Network side of the span. |
hdsl15mESLoopACust | 1.3.6.1.4.1.927.1.7.1.1.10 | short | read-only |
HDSL 15-min ES count on Loop A's Customer side of the span. |
hdsl15mESLoopBCust | 1.3.6.1.4.1.927.1.7.1.1.11 | short | read-only |
HDSL 15-min ES count on Loop B's Customer side of the span. |
hdsl15mUASLoopACust | 1.3.6.1.4.1.927.1.7.1.1.12 | short | read-only |
HDSL 15-min UAS count on Loop A's Customer side of the span. |
hdsl15mUASLoopBCust | 1.3.6.1.4.1.927.1.7.1.1.13 | short | read-only |
HDSL 15-min UAS count on Loop B's Customer side of the span. |
hdsl15mSESLoopACust | 1.3.6.1.4.1.927.1.7.1.1.14 | short | read-only |
HDSL 15-min SES count on Loop A's customer side of the span. |
hdsl15mSESLoopBCust | 1.3.6.1.4.1.927.1.7.1.1.15 | short | read-only |
HDSL 15-min SES count on Loop B's customer side of the span. |
hdslSpan24hPerformanceTable | 1.3.6.1.4.1.927.1.7.2 | no-access |
This table provides 24-hour performance history monitoring of the last 7 days for all HDSL spans Errored Seconds (ES), Severely Errored Seconds (SES) and Unavailable Seconds (UAS). |
|
1.3.6.1.4.1.927.1.7.2.1 | no-access |
Entries of the HDSL span 24-hour performance table |
||
hdslSpan24hSlotId | 1.3.6.1.4.1.927.1.7.2.1.1 | integer | read-only |
Identifies the HDSL line occupied in the chassis. The slots are numbered 1 through 16 from left to right. |
hdslSpan24hSpanId | 1.3.6.1.4.1.927.1.7.2.1.2 | integer | read-only |
Identifies the span of the HDSL line we are monitoring. Depending on the number of regenerator(s) (REGs) present in an HDSL loop, a span will be numbered as follows: 0 REG - only 1 span. 1 REG - span between LTU and REG is identified as 1. span between REG and NTU is identified as 2. 2 REGs - span between LTU and REG #1 is identified as 1. span between REG #1 and REG #2 is identified as 2. span between REG #2 and NTU is identified as 3. |
hdslSpan24hHistoryId | 1.3.6.1.4.1.927.1.7.2.1.3 | integer | read-only |
Identify the history ID within the 7 24-hour performance history. |
hdsl24hESLoopANet | 1.3.6.1.4.1.927.1.7.2.1.4 | integer | read-only |
HDSL 24-hour ES count on Loop A's Network side of the span. |
hdsl24hESLoopBNet | 1.3.6.1.4.1.927.1.7.2.1.5 | integer | read-only |
HDSL 24-hour ES count on Loop B's Network side of the span. |
hdsl24hUASLoopANet | 1.3.6.1.4.1.927.1.7.2.1.6 | integer | read-only |
HDSL 24-hour UAS count on Loop A's Network side of the span. |
hdsl24hUASLoopBNet | 1.3.6.1.4.1.927.1.7.2.1.7 | integer | read-only |
HDSL 24-hour UAS count on Loop B's Network side of the span. |
hdsl24hSESLoopANet | 1.3.6.1.4.1.927.1.7.2.1.8 | integer | read-only |
HDSL 24-hour SES count on Loop A's Network side of the span. |
hdsl24hSESLoopBNet | 1.3.6.1.4.1.927.1.7.2.1.9 | integer | read-only |
HDSL 24-hour SES count on Loop B's Network side of the span. |
hdsl24hESLoopACust | 1.3.6.1.4.1.927.1.7.2.1.10 | integer | read-only |
HDSL 24-hour ES count on Loop A's Customer side of the span. |
hdsl24hESLoopBCust | 1.3.6.1.4.1.927.1.7.2.1.11 | integer | read-only |
HDSL 24-hour ES count on Loop B's Customer side of the span. |
hdsl24hUASLoopACust | 1.3.6.1.4.1.927.1.7.2.1.12 | integer | read-only |
HDSL 24-hour UAS count on Loop A's Customer side of the span. |
hdsl24hUASLoopBCust | 1.3.6.1.4.1.927.1.7.2.1.13 | integer | read-only |
HDSL 24-hour UAS count on Loop B's Customer side of the span. |
hdsl24hSESLoopACust | 1.3.6.1.4.1.927.1.7.2.1.14 | integer | read-only |
HDSL 24-hour SES count on Loop A's Customer side of the span. |
hdsl24hSESLoopBCust | 1.3.6.1.4.1.927.1.7.2.1.15 | integer | read-only |
HDSL 24-hour SES count on Loop B's Customer side of the span. |
hdslSpanCurr24hPerformanceTable | 1.3.6.1.4.1.927.1.7.3 | no-access |
This table provides the current 24-hour performance history monitoring for all HDSL spans Errored Seconds (ES), Severely Errored Seconds (SES) and Unavailable Seconds (UAS). |
|
1.3.6.1.4.1.927.1.7.3.1 | no-access |
Entries of the HDSL span Current 24-hour PM counts table |
||
hdslSpanCurr24hSlotId | 1.3.6.1.4.1.927.1.7.3.1.1 | integer | read-only |
Identifies the HDSL line occupied in the chassis. The slots are numbered 1 through 16 from left to right. |
hdslSpanCurr24hSpanId | 1.3.6.1.4.1.927.1.7.3.1.2 | integer | read-only |
Identifies the span of the HDSL line we are monitoring. Depending on the number of regenerator(s) (REGs) present in an HDSL loop, a span will be numbered as follows: 0 REG - only 1 span. 1 REG - span between LTU and REG is identified as 1. span between REG and NTU is identified as 2. 2 REGs - span between LTU and REG #1 is identified as 1. span between REG #1 and REG #2 is identified as 2. span between REG #2 and NTU is identified as 3. |
hdslCurr24hESLoopANet | 1.3.6.1.4.1.927.1.7.3.1.3 | integer | read-only |
HDSL Current 24-hour ES count on Loop A's Network side of the span. |
hdslCurr24hESLoopBNet | 1.3.6.1.4.1.927.1.7.3.1.4 | integer | read-only |
HDSL 24-hour ES count on Loop B's Network side of the span. |
hdslCurr24hUASLoopANet | 1.3.6.1.4.1.927.1.7.3.1.5 | integer | read-only |
HDSL 24-hour UAS count on Loop A's Network side of the span. |
hdslCurr24hUASLoopBNet | 1.3.6.1.4.1.927.1.7.3.1.6 | integer | read-only |
HDSL 24-hour UAS count on Loop B's Network side of the span. |
hdslCurr24hSESLoopANet | 1.3.6.1.4.1.927.1.7.3.1.7 | integer | read-only |
HDSL 24-hour SES count on Loop A's Network side of the span. |
hdslCurr24hSESLoopBNet | 1.3.6.1.4.1.927.1.7.3.1.8 | integer | read-only |
HDSL 24-hour SES count on Loop B's Network side of the span. |
hdslCurr24hESLoopACust | 1.3.6.1.4.1.927.1.7.3.1.9 | integer | read-only |
HDSL 24-hour ES count on Loop A's Customer side of the span. |
hdslCurr24hESLoopBCust | 1.3.6.1.4.1.927.1.7.3.1.10 | integer | read-only |
HDSL 24-hour ES count on Loop B's Customer side of the span. |
hdslCurr24hUASLoopACust | 1.3.6.1.4.1.927.1.7.3.1.11 | integer | read-only |
HDSL 24-hour UAS count on Loop A's Customer side of the span. |
hdslCurr24hUASLoopBCust | 1.3.6.1.4.1.927.1.7.3.1.12 | integer | read-only |
HDSL 24-hour UAS count on Loop B's Customer side of the span. |
hdslCurr24hSESLoopACust | 1.3.6.1.4.1.927.1.7.3.1.13 | integer | read-only |
HDSL 24-hour SES count on Loop A's Customer side of the span. |
hdslCurr24hSESLoopBCust | 1.3.6.1.4.1.927.1.7.3.1.14 | integer | read-only |
HDSL 24-hour SES count on Loop B's Customer side of the span. |
hdslSpanStatisticsTable | 1.3.6.1.4.1.927.1.7.4 | no-access |
This table lists statistics for margin, pulse attenuation and state of the loop for all spans of the HDSL loop. |
|
1.3.6.1.4.1.927.1.7.4.1 | no-access |
Entries of the HDSL span statistics table |
||
hdslStatisticsSlotId | 1.3.6.1.4.1.927.1.7.4.1.1 | integer | read-only |
Identifies the HDSL line occupied in the chassis. The slots are numbered 1 through 16 from left to right. |
hdslStatisticsSpanId | 1.3.6.1.4.1.927.1.7.4.1.2 | integer | read-only |
Identifies the span of the HDSL line we are monitoring. Depending on the number of regenerator(s) (REGs) present in an HDSL loop, a span will be numbered as follows: 0 REG - only 1 span. 1 REG - span between LTU and REG is identified as 1. span between REG and NTU is identified as 2. 2 REGs - span between LTU and REG #1 is identified as 1. span between REG #1 and REG #2 is identified as 2. span between REG #2 and NTU is identified as 3. |
hdslLoopPairState | 1.3.6.1.4.1.927.1.7.4.1.3 | byte | read-only |
Current state on the HDSL loop of span: 0 - loop pair is normal 1 - loop pair is exchanged. |
hdslLoopATipRingReversal | 1.3.6.1.4.1.927.1.7.4.1.4 | byte | read-only |
Current TIP/RING state on the HDSL loop A of span: 0 - TIP/RING on loop A is not reversed. 1 - TIP/RING on loop A is reversed. |
hdslLoopBTipRingReversal | 1.3.6.1.4.1.927.1.7.4.1.5 | byte | read-only |
Current TIP/RING state on the HDSL loop B of span: 0 - TIP/RING on loop B is not reversed. 1 - TIP/RING on loop B is reversed. |
hdslLoopAUpState | 1.3.6.1.4.1.927.1.7.4.1.6 | byte | read-only |
Current loop state on loop A of the span: 0 - loop is up. 1 - loop is acquiring/converging. 2 - loop is signaling. |
hdslLoopBUpState | 1.3.6.1.4.1.927.1.7.4.1.7 | byte | read-only |
Current loop state on loop B of the span: 0 - loop is up. 1 - loop is acquiring/converging. 2 - loop is signaling. |
hdslMarginLoopANet | 1.3.6.1.4.1.927.1.7.4.1.8 | byte | read-only |
Current Margin on Loop A's Network side of the span. |
hdslMarginHighLoopANet | 1.3.6.1.4.1.927.1.7.4.1.9 | byte | read-only |
Highest Margin on Loop A's Network side of the span. |
hdslMarginLowLoopANet | 1.3.6.1.4.1.927.1.7.4.1.10 | byte | read-only |
Lowest Margin on Loop A's Network side of the span. |
hdslMarginLoopBNet | 1.3.6.1.4.1.927.1.7.4.1.11 | byte | read-only |
Current Margin on Loop B's Network side of the span. |
hdslMarginHighLoopBNet | 1.3.6.1.4.1.927.1.7.4.1.12 | byte | read-only |
Highest Margin on Loop B's Network side of the span. |
hdslMarginLowLoopBNet | 1.3.6.1.4.1.927.1.7.4.1.13 | byte | read-only |
Lowest Margin on Loop B's Network side of the span. |
hdslPulseAttenuationLoopANet | 1.3.6.1.4.1.927.1.7.4.1.14 | byte | read-only |
Pulse Attenuation on Loop A's Network side of the span. |
hdslPulseAttenuationLoopBNet | 1.3.6.1.4.1.927.1.7.4.1.15 | byte | read-only |
Pulse Attenuation on Loop B's Network side of the span. |
hdslMarginLoopACust | 1.3.6.1.4.1.927.1.7.4.1.16 | byte | read-only |
Current Margin on Loop A's Customer side of the span. |
hdslMarginHighLoopACust | 1.3.6.1.4.1.927.1.7.4.1.17 | byte | read-only |
Highest Margin on Loop A's Customer side of the span. |
hdslMarginLowLoopACust | 1.3.6.1.4.1.927.1.7.4.1.18 | byte | read-only |
Lowest Margin on Loop A's Customer side of the span. |
hdslMarginLoopBCust | 1.3.6.1.4.1.927.1.7.4.1.19 | byte | read-only |
Current Margin on Loop B's Customer side of the span. |
hdslMarginHighLoopBCust | 1.3.6.1.4.1.927.1.7.4.1.20 | byte | read-only |
Highest Margin on Loop B's Customer side of the span. |
hdslMarginLowLoopBCust | 1.3.6.1.4.1.927.1.7.4.1.21 | byte | read-only |
Lowest Margin on Loop B's Customer side of the span. |
hdslPulseAttenuationLoopACust | 1.3.6.1.4.1.927.1.7.4.1.22 | byte | read-only |
Pulse Attenuation on Loop A's Customer side of the span. |
hdslPulseAttenuationLoopBCust | 1.3.6.1.4.1.927.1.7.4.1.23 | byte | read-only |
Pulse Attenuation on Loop B's Customer side of the span. |
hdslSpanAlarmTable | 1.3.6.1.4.1.927.1.7.5 | no-access |
This table provides the HDSL alarms indication on both loops of the HDSL spans. |
|
1.3.6.1.4.1.927.1.7.5.1 | no-access |
Entries of the HDSL span alarm table |
||
hdslSpanAlarmSlotId | 1.3.6.1.4.1.927.1.7.5.1.1 | integer | read-only |
Identifies the HDSL line occupied in the chassis. The slots are numbered 1 through 16 from left to right. |
hdslSpanAlarmSpanId | 1.3.6.1.4.1.927.1.7.5.1.2 | integer | read-only |
Identifies the span of the HDSL line we are monitoring. Depending on the number of regenerator(s) (REGs) present in an HDSL loop, a span will be numbered as follows: 0 REG - only 1 span. 1 REG - span between LTU and REG is identified as 1. span between REG and NTU is identified as 2. 2 REGs - span between LTU and REG #1 is identified as 1. span between REG #1 and REG #2 is identified as 2. span between REG #2 and NTU is identified as 3. |
hdslMarginAlarmLoopANet | 1.3.6.1.4.1.927.1.7.5.1.3 | byte | read-only |
Margin Threshold Exceeded on loop A's Network side of the span. |
hdslMarginAlarmLoopBNet | 1.3.6.1.4.1.927.1.7.5.1.4 | byte | read-only |
Margin Threshold Exceeded on loop B's Network side of the span. |
hdslESAlarmLoopANet | 1.3.6.1.4.1.927.1.7.5.1.5 | byte | read-only |
Errored Seconds threshold exceeded on loop A's Network side of the span. |
hdslESAlarmLoopBNet | 1.3.6.1.4.1.927.1.7.5.1.6 | byte | read-only |
Errored Seconds threshold exceeded on loop B's Network side of the span. |
hdslUASAlarmLoopANet | 1.3.6.1.4.1.927.1.7.5.1.7 | byte | read-only |
Unavailable Seconds threshold exceeded on loop A's Network side of the span. |
hdslUASAlarmLoopBNet | 1.3.6.1.4.1.927.1.7.5.1.8 | byte | read-only |
Unavailable Seconds threshold exceeded on loop B's Network side of the span. |
hdslMarginAlarmLoopACust | 1.3.6.1.4.1.927.1.7.5.1.9 | byte | read-only |
Margin Threshold Exceeded on loop A's Customer side of the span. |
hdslMarginAlarmLoopBCust | 1.3.6.1.4.1.927.1.7.5.1.10 | byte | read-only |
Margin Threshold Exceeded on loop B's Customer side of the span. |
hdslESAlarmLoopACust | 1.3.6.1.4.1.927.1.7.5.1.11 | byte | read-only |
Errored Seconds Exceeded on loop A's Customer side of the span. |
hdslESAlarmLoopBCust | 1.3.6.1.4.1.927.1.7.5.1.12 | byte | read-only |
Errored Seconds Exceeded on loop B's Customer side of the span. |
hdslUASAlarmLoopACust | 1.3.6.1.4.1.927.1.7.5.1.13 | byte | read-only |
Unavailable Seconds threshold exceeded on loop A's customer side of the span. |
hdslUASAlarmLoopBCust | 1.3.6.1.4.1.927.1.7.5.1.14 | byte | read-only |
Unavailable Seconds threshold exceeded on loop B's customer side of the span. |
hdslLOSWAlarmLoopA | 1.3.6.1.4.1.927.1.7.5.1.15 | byte | read-only |
Loss of Sync Word (LOSW) occurred on loop A's Network side of the HDSL loop. |
hdslLOSWAlarmLoopB | 1.3.6.1.4.1.927.1.7.5.1.16 | byte | read-only |
Loss of Sync Word (LOSW) occurred on loop B's Network side of the HDSL loop. |
hdslPFOAlarmLoopA | 1.3.6.1.4.1.927.1.7.5.1.17 | byte | read-only |
Power Feed Open (PFO) on loop A's Network side of the HDSL loop. |
hdslPFOAlarmLoopB | 1.3.6.1.4.1.927.1.7.5.1.18 | byte | read-only |
Power Feed Open (PFO) on loop B's Network side of the HDSL loop. |
hdslPFSAlarmLoopA | 1.3.6.1.4.1.927.1.7.5.1.19 | byte | read-only |
Power Feed Short (PFS) on loop A's Network side of the HDSL loop. |
hdslPFSAlarmLoopB | 1.3.6.1.4.1.927.1.7.5.1.20 | byte | read-only |
Power Feed Short (PFS) on loop B's Network side of the HDSL loop. |
hdslBERAlarmLoopA | 1.3.6.1.4.1.927.1.7.5.1.21 | byte | read-only |
Bit Error Rate (BER) on loop A's Network side of the HDSL loop. |
hdslBERAlarmLoopB | 1.3.6.1.4.1.927.1.7.5.1.22 | byte | read-only |
Bit Error Rate (BER) on loop B's Network side of the HDSL loop. |
hdslSpanAlarmHistoryTable | 1.3.6.1.4.1.927.1.7.6 | no-access |
This table provides the HDSL alarms history on both loops of the HDSL spans. |
|
1.3.6.1.4.1.927.1.7.6.1 | no-access |
Entries of the HDSL span Alarm History table |
||
hdslSpanAlarmHistorySlotId | 1.3.6.1.4.1.927.1.7.6.1.1 | integer | read-only |
Identifies the HDSL line occupied in the chassis. The slots are numbered 1 through 16 from left to right. |
hdslSpanAlarmHistorySpanId | 1.3.6.1.4.1.927.1.7.6.1.2 | integer | read-only |
Identifies the span of the HDSL line we are monitoring. Depending on the number of regenerator(s) (REGs) present in an HDSL loop, a span will be numbered as follows: 0 REG - only 1 span. 1 REG - Span between LTU and REG is identified as 1. Span between REG and NTU is identified as 2. 2 REGs - Span between LTU and REG #1 is identified as 1. Span between REG #1 and REG #2 is identified as 2. Span between REG #2 and NTU is identified as 3. |
hdslMarginAlarmFirstLoopA | 1.3.6.1.4.1.927.1.7.6.1.3 | pgtimestamp | read-only |
Date and time Margin threshold exceeded alarm first occurred on Loop A of a span |
hdslMarginAlarmLastLoopA | 1.3.6.1.4.1.927.1.7.6.1.4 | pgtimestamp | read-only |
Date and time Margin threshold exceeded alarm last occurred on Loop A of a span |
hdslMarginAlarmCountLoopA | 1.3.6.1.4.1.927.1.7.6.1.5 | integer | read-only |
The number of times the Margin threshold exceeded alarm has occurred on Loop A of a span. |
hdslMarginAlarmFirstLoopB | 1.3.6.1.4.1.927.1.7.6.1.6 | pgtimestamp | read-only |
Date and time Margin threshold exceeded alarm first occurred on Loop B of a span |
hdslMarginAlarmLastLoopB | 1.3.6.1.4.1.927.1.7.6.1.7 | pgtimestamp | read-only |
Date and time Margin threshold exceeded alarm last occurred on Loop B of a span |
hdslMarginAlarmCountLoopB | 1.3.6.1.4.1.927.1.7.6.1.8 | integer | read-only |
The number of times the Margin threshold exceeded alarm has occurred on Loop B of a span. |
hdslESAlarmFirstLoopA | 1.3.6.1.4.1.927.1.7.6.1.9 | pgtimestamp | read-only |
Date and time Errored Seconds threshold exceeded alarm first occurred on Loop A of a span |
hdslESAlarmLastLoopA | 1.3.6.1.4.1.927.1.7.6.1.10 | pgtimestamp | read-only |
Date and time Errored Seconds threshold exceeded alarm last occurred on Loop A of a span |
hdslESAlarmCountLoopA | 1.3.6.1.4.1.927.1.7.6.1.11 | integer | read-only |
The number of times the Errored Seconds threshold exceeded alarm has occurred on Loop A of a span. |
hdslESAlarmFirstLoopB | 1.3.6.1.4.1.927.1.7.6.1.12 | pgtimestamp | read-only |
Date and time Errored Seconds threshold exceeded alarm first occurred on Loop B of a span |
hdslESAlarmLastLoopB | 1.3.6.1.4.1.927.1.7.6.1.13 | pgtimestamp | read-only |
Date and time Errored Seconds threshold exceeded alarm last occurred on Loop B of a span |
hdslESAlarmCountLoopB | 1.3.6.1.4.1.927.1.7.6.1.14 | integer | read-only |
The number of times the Errored Seconds threshold exceeded alarm has occurred on Loop B of a span. |
hdslUASAlarmFirstLoopA | 1.3.6.1.4.1.927.1.7.6.1.15 | pgtimestamp | read-only |
Date and time Unavailable Seconds threshold exceeded alarm first occurred on Loop A of a span |
hdslUASAlarmLastLoopA | 1.3.6.1.4.1.927.1.7.6.1.16 | pgtimestamp | read-only |
Date and time Unavailable Seconds threshold exceeded alarm last occurred on Loop A of a span |
hdslUASAlarmCountLoopA | 1.3.6.1.4.1.927.1.7.6.1.17 | integer | read-only |
The number of times the Unavailable Seconds threshold exceeded alarm has occurred on Loop A of a span. |
hdslUASAlarmFirstLoopB | 1.3.6.1.4.1.927.1.7.6.1.18 | pgtimestamp | read-only |
Date and time Unavailable Seconds threshold exceeded alarm first occurred on Loop B of a span |
hdslUASAlarmLastLoopB | 1.3.6.1.4.1.927.1.7.6.1.19 | pgtimestamp | read-only |
Date and time Unavailable Seconds threshold exceeded alarm last occurred on Loop B of a span |
hdslUASAlarmCountLoopB | 1.3.6.1.4.1.927.1.7.6.1.20 | integer | read-only |
The number of times the Unavailable Seconds threshold exceeded alarm has occurred on Loop B of a span. |
hdslLOSWAlarmFirstLoopA | 1.3.6.1.4.1.927.1.7.6.1.21 | pgtimestamp | read-only |
Date and time the Loss of Sync Word alarm first occurred on Loop A of a span |
hdslLOSWAlarmLastLoopA | 1.3.6.1.4.1.927.1.7.6.1.22 | pgtimestamp | read-only |
Date and time the Loss of Sync Word alarm last occurred on Loop A of a span |
hdslLOSWAlarmCountLoopA | 1.3.6.1.4.1.927.1.7.6.1.23 | integer | read-only |
The number of times the Loss of Sync Word alarm has occurred on Loop A of a span. |
hdslLOSWAlarmFirstLoopB | 1.3.6.1.4.1.927.1.7.6.1.24 | pgtimestamp | read-only |
Date and time the Loss of Sync Word alarm first occurred on Loop B of a span |
hdslLOSWAlarmLastLoopB | 1.3.6.1.4.1.927.1.7.6.1.25 | pgtimestamp | read-only |
Date and time the Loss of Sync Word alarm last occurred on Loop B of a span |
hdslLOSWAlarmCountLoopB | 1.3.6.1.4.1.927.1.7.6.1.26 | integer | read-only |
The number of times the Loss of Sync Word alarm has occurred on Loop B of a span. |
hdslPFOAlarmFirstLoopA | 1.3.6.1.4.1.927.1.7.6.1.27 | pgtimestamp | read-only |
Date and time the Power Feed Open alarm first occurred on Loop A of a span |
hdslPFOAlarmLastLoopA | 1.3.6.1.4.1.927.1.7.6.1.28 | pgtimestamp | read-only |
Date and time the Power Feed Open alarm last occurred on Loop A of a span |
hdslPFOAlarmCountLoopA | 1.3.6.1.4.1.927.1.7.6.1.29 | integer | read-only |
The number of times the Power Feed Open alarm has occurred on Loop A of a span. |
hdslPFOAlarmFirstLoopB | 1.3.6.1.4.1.927.1.7.6.1.30 | pgtimestamp | read-only |
Date and time the Power Feed Open alarm first occurred on Loop B of a span |
hdslPFOAlarmLastLoopB | 1.3.6.1.4.1.927.1.7.6.1.31 | pgtimestamp | read-only |
Date and time the Power Feed Open alarm last occurred on Loop B of a span |
hdslPFOAlarmCountLoopB | 1.3.6.1.4.1.927.1.7.6.1.32 | integer | read-only |
The number of times the Power Feed Open alarm has occurred on Loop B of a span. |
hdslPFSAlarmFirstLoopA | 1.3.6.1.4.1.927.1.7.6.1.33 | pgtimestamp | read-only |
Date and time the Power Feed Short alarm first occurred on Loop A of a span |
hdslPFSAlarmLastLoopA | 1.3.6.1.4.1.927.1.7.6.1.34 | pgtimestamp | read-only |
Date and time the Power Feed Short alarm last occurred on Loop A of a span |
hdslPFSAlarmCountLoopA | 1.3.6.1.4.1.927.1.7.6.1.35 | integer | read-only |
The number of times the Power Feed Short alarm has occurred on Loop A of a span. |
hdslPFSAlarmFirstLoopB | 1.3.6.1.4.1.927.1.7.6.1.36 | pgtimestamp | read-only |
Date and time the Power Feed Short alarm first occurred on Loop B of a span |
hdslPFSAlarmLastLoopB | 1.3.6.1.4.1.927.1.7.6.1.37 | pgtimestamp | read-only |
Date and time the Power Feed Short alarm last occurred on Loop B of a span |
hdslPFSAlarmCountLoopB | 1.3.6.1.4.1.927.1.7.6.1.38 | integer | read-only |
The number of times the Power Feed Short alarm has occurred on Loop B of a span. |
hdslBERAlarmFirstLoopA | 1.3.6.1.4.1.927.1.7.6.1.39 | pgtimestamp | read-only |
Date and time the BER threshold exceeded alarm first occurred on Loop A of a span |
hdslBERAlarmLastLoopA | 1.3.6.1.4.1.927.1.7.6.1.40 | pgtimestamp | read-only |
Date and time the BER threshold exceeded alarm last occurred on Loop A of a span |
hdslBERAlarmCountLoopA | 1.3.6.1.4.1.927.1.7.6.1.41 | integer | read-only |
The number of times the BER threshold exceeded alarm has occurred on Loop A of a span. |
hdslBERAlarmFirstLoopB | 1.3.6.1.4.1.927.1.7.6.1.42 | pgtimestamp | read-only |
Date and time the BER threshold exceeded alarm first occurred on Loop B of a span |
hdslBERAlarmLastLoopB | 1.3.6.1.4.1.927.1.7.6.1.43 | pgtimestamp | read-only |
Date and time the BER threshold exceeded alarm last occurred on Loop B of a span |
hdslBERAlarmCountLoopB | 1.3.6.1.4.1.927.1.7.6.1.44 | integer | read-only |
The number of times the BER threshold exceeded alarm has occurred on Loop B of a span. |
hdslSpanAlarmSeverityTable | 1.3.6.1.4.1.927.1.7.7 | no-access |
The HDSL span alarm severity table provides severity settings for HDSL alarms reporting and threshold settings for Errored Second(ES), Margin(MAR), Unavailable Seconds(UAS) and Bit Error Rate(BER). |
|
1.3.6.1.4.1.927.1.7.7.1 | no-access |
Entry in the hdslSpanAlarmSeverityTable |
||
hdslSpanAlarmSeveritySlotId | 1.3.6.1.4.1.927.1.7.7.1.1 | integer | read-only |
The slot number of the HDSL loop whose alarm severity or threshold we are setting. The slots are numbered 1 through 16 from left to right. |
hdslSpanAlarmSeveritySpanId | 1.3.6.1.4.1.927.1.7.7.1.2 | integer | read-only |
The span number of the HDSL loop whose alarm severity or threshold we are setting. Depending on the number of regenerator(s) (REGs) present in an HDSL loop, a span will be numbered as follows: 0 REG - only 1 span. 1 REG - span between LTU and REG is identified as 1. span between REG and NTU is identified as 2. 2 REGs - span between LTU and REG #1 is identified as 1. span between REG #1 and REG #2 is identified as 2. span between REG #2 and NTU is identified as 3. |
hdslSpanLOSWAlarmSetting | 1.3.6.1.4.1.927.1.7.7.1.3 | pgalarmseverityprotectionswitchmode | read-write |
Sets the severity for Loss of Sync Word alarm. |
hdslSpanPFOAlarmSetting | 1.3.6.1.4.1.927.1.7.7.1.4 | pgalarmseveritymode | read-write |
Sets the severity for Power Feed Open alarm. |
hdslSpanPFSAlarmSetting | 1.3.6.1.4.1.927.1.7.7.1.5 | pgalarmseveritymode | read-write |
Sets the severity for Power Feed Short alarm. |
hdslSpanMarginThreshold | 1.3.6.1.4.1.927.1.7.7.1.6 | byte | read-write |
Sets the HDSL Margin threshold value. |
hdslSpanMarginAlarmSetting | 1.3.6.1.4.1.927.1.7.7.1.7 | pgalarmseverityprotectionswitchmode | read-write |
Sets the severity for Margin threshold exceeded alarm. |
hdslSpanESThreshold | 1.3.6.1.4.1.927.1.7.7.1.8 | byte | read-write |
Sets the HDSL Errored Seconds threshold value. |
hdslSpanESAlarmSetting | 1.3.6.1.4.1.927.1.7.7.1.9 | pgalarmseverityprotectionswitchmode | read-write |
Sets the severity for Errored Seconds threshold exceeded alarm. |
hdslSpanUASThreshold | 1.3.6.1.4.1.927.1.7.7.1.10 | byte | read-write |
Sets the HDSL Unavailable Seconds threshold value. |
hdslSpanUASAlarmSetting | 1.3.6.1.4.1.927.1.7.7.1.11 | pgalarmseveritymode | read-write |
Sets the severity for UAS threshold exceeded alarm. |
hdslSpanBERThreshold | 1.3.6.1.4.1.927.1.7.7.1.12 | pgberthreshold | read-write |
Sets the HDSL BER threshold value. |
hdslSpanBERAlarmSetting | 1.3.6.1.4.1.927.1.7.7.1.13 | pgalarmseveritymode | read-write |
Sets the severity for HDSL BER threshold exceeded alarm. |