OC-STB-HOST-MIB: View SNMP OID List / Download MIB

VENDOR: CABLE TELEVISION LABORATORIES


 Home MIB: OC-STB-HOST-MIB
Download as:   
SNMPv2-CONF, CLAB-DEF-MIB, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, INET-ADDRESS-MIB, HOST-RESOURCES-MIB, DOCS-IF-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ocStbHostMibModule 1.3.6.1.4.1.4491.2.3.1
This MIB module contains the management objects for the management of OpenCable Set-top Host Device.
     ocStbHostNotifications 1.3.6.1.4.1.4491.2.3.1.0
     ocStbHostMibObjects 1.3.6.1.4.1.4491.2.3.1.1
         ocStbHostSystem 1.3.6.1.4.1.4491.2.3.1.1.1
             ocStbHostHWIdentifiers 1.3.6.1.4.1.4491.2.3.1.1.1.1
                 ocStbHostSerialNumber 1.3.6.1.4.1.4491.2.3.1.1.1.1.1
The manufacturers serial number for this device.
                 ocStbHostHostID 1.3.6.1.4.1.4491.2.3.1.1.1.1.2
Allows the manager to retrieve the 40-bit Host ID of the ocStbHost (SNMP apdu TLV #1) in the string format indicated below: M-MMU-UUU-UUU-UUL Where: M-MM is the decimal representation of the 10-bit CHICA assigned manufacturer number. U-UUU-UUU-UU is the decimal representation of the 30-bit manufacturer assigned unit number. L is a Luhn check digit calculated over the preceding 12 decimal digits. If the Host ID is unknown, then the string shall be all zeros e.g., 0-000-000-000-000.
                 ocStbHostCapabilities 1.3.6.1.4.1.4491.2.3.1.1.1.1.3
The capabilities indication of the STB device. other means a device which is not described by one of the other enumerations in this list. ochd2 means the STB device is an OpenCable Host Device Version 2 Compliant device. embedded means the STB device is of the non-removable security type. dcas means the STB device is of the downloadable security type. ochd21 means the STB device is an OpenCable Host Device Version 2.1 Compliant device. bocr means the STB is bi-directional OCUR compliant.
             ocStbHostInterfaces 1.3.6.1.4.1.4491.2.3.1.1.1.2
                 ocStbHostDevInterfaceTypes 1.3.6.1.4.1.4491.2.3.1.1.1.2.1
                     ocStbHostOther 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.1
The type identifier used for an interface not defined in this MIB.
                     ocStbHostScte55FdcRx 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.2
The type identifier used for SCTE-55 FDC Receiver (i.e., out-of-band downstream tuner).
                     ocStbHostScte55RdcTx 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.3
The type identifier used for SCTE-55 RDC Transmitter (i.e., out-of-band upstream transmitter).
                     ocStbHostScte40FatRx 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.4
The type identifier used for SCTE-40 FAT Receiver (i.e., in-band video tuner).
                     ocStbHostBbVideoIn 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.5
The type identifier used for baseband video input.
                     ocStbHostBbAudioIn 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.6
The type identifier used for baseband audio input.
                     ocStbHostBbVideoOut 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.7
The type identifier used for baseband video output.
                     ocStbHostBbAudioOut 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.8
The type identifier used for baseband audio output.
                     ocStbHostRfOutCh 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.9
The type identifier used for analog RF output.
                     ocStbHostSVideoIn 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.10
The type identifier used for SVideo input.
                     ocStbHostSVideoOut 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.11
The type identifier used for SVideo output.
                     ocStbHostComponentIn 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.12
The type identifier used for Component input.
                     ocStbHostComponentOut 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.13
The type identifier used for Component output.
                     ocStbHostDviIn 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.14
The type identifier used for DVI input.
                     ocStbHostDviOut 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.15
The type identifier used for DVI output.
                     ocStbHostHdmiIn 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.16
The type identifier used for HDMI input.
                     ocStbHostHdmiOut 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.17
The type identifier used for HDMI output.
                     ocStbHostRcaSpdifIn 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.18
The type identifier used for RCA SPDIF input.
                     ocStbHostRcaSpdifOut 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.19
The type identifier used for RCA SPDIF output.
                     ocStbHostToslinkSpdifIn 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.20
The type identifier used for Toslink SPDIF input.
                     ocStbHostToslinkSpdifOut 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.21
The type identifier used for Toslink SPDIF output.
                     ocStbHostDisplayOut 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.22
The type identifier used for the television screen output.
                     ocStbHost1394In 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.23
The type identifier used for IEEE-1394 input.
                     ocStbHost1394Out 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.24
The type identifier used for IEEE-1394 output.
                     ocStbHostDRIInterface 1.3.6.1.4.1.4491.2.3.1.1.1.2.1.25
The type identifier used for the DRI interface.
                 ocStbHostAVInterfaceTable 1.3.6.1.4.1.4491.2.3.1.1.1.2.2
This table contains a list of A/V (Audio/Video) interfaces (video inputs/outputs, tuners, audio inputs/outputs) in the ocStbHost.
                     ocStbHostAVInterfaceEntry 1.3.6.1.4.1.4491.2.3.1.1.1.2.2.1
Each entry describes the type and status of the A/V interface on the ocStbHost. The details of A/V interface entries may be defined in table extensions as indicated in the MIB object ocStbHostAVInterfaceType.
                         ocStbHostAVInterfaceIndex 1.3.6.1.4.1.4491.2.3.1.1.1.2.2.1.1
Index of the table.
                         ocStbHostAVInterfaceType 1.3.6.1.4.1.4491.2.3.1.1.1.2.2.1.2
An indication of the type of interface. If this value is ocStbHostComponentOut then a corresponding entry exists in the ocStbHostComponentVideoTable. If this value is ocStbHostRFOutCh then a corresponding entry exists in the ocStbHostRFChannelOutTable. If this value is ocStbHostScte40FatRx then a corresponding entry exists in the ocStbHostInBandTunerTable. If this value is ocStbHostDviOut or ocStbHostHdmiOut then a corresponding entry exists in the ocStbHostDVIHDMITable If this value is ocStbHost1394Out then a corresponding entry exists in the ocStbHostIEEE1394Table If this value is hrDeviceOther then no further information is available for the device.
                         ocStbHostAVInterfaceDesc 1.3.6.1.4.1.4491.2.3.1.1.1.2.2.1.3
Textual description of the A/V Interface
                         ocStbHostAVInterfaceStatus 1.3.6.1.4.1.4491.2.3.1.1.1.2.2.1.4
Status of the interface. enabled indicates the A/V interface is active and can be used for the user. disabled indicates the A/V interface is currently not available for the user due to hardware, software or configuration conditions. Additional information about the interface status may be available in the A/V Type interface Table extensions.
                 ocStbHostIEEE1394Objects 1.3.6.1.4.1.4491.2.3.1.1.1.2.3
                     ocStbHostIEEE1394Table 1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1
This table contains attributes associated with the ocStbHost Interfaces of type IEEE 1394.
                         ocStbHostIEEE1394Entry 1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1
An entry exists in this table for each interface of the type IEEE 1394.
                             ocStbHostIEEE1394ActiveNodes 1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1.1
This object allows the manager to retrieve the number of nodes connected to the 1394 bus of the ocStbHost. The value -1 means unknown number of nodes.
                             ocStbHostIEEE1394DataXMission 1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1.2
This object allows the manager to retrieve the state of data being transmitted over the 1394 bus. True indicates that data is being transmitted over the 1394 bus.
                             ocStbHostIEEE1394DTCPStatus 1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1.3
This object allows the manager to retrieve the state of DTCP on the device. True indicates that DTCP is enabled and content is being encrypted of the 1394 link on the ocStbHost.
                             ocStbHostIEEE1394LoopStatus 1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1.4
This object allows the manager to retrieve the state of a Loop present on the 1394 bus. True indicates that a Loop is present on the 1394 bus.
                             ocStbHostIEEE1394RootStatus 1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1.5
This object allows the manager to retrieve the state of Root Status on the device. True indicates that the set-top is the Root node on the 1394 bus.
                             ocStbHostIEEE1394CycleIsMaster 1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1.6
This object allows the manager to retrieve the state of Cycle Master on the device. True indicates that the set-top is Cycle Master on the 1394 bus.
                             ocStbHostIEEE1394IRMStatus 1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1.7
This object allows the manager to retrieve the state of Isochronous Resource Master on the device. True indicates that the set-top is IRM on the 1394 bus.
                             ocStbHostIEEE1394AudioMuteStatus 1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1.8
The value true indicates that the audio signal is muted for this Interface. false means the audio is not muted.
                             ocStbHostIEEE1394VideoMuteStatus 1.3.6.1.4.1.4491.2.3.1.1.1.2.3.1.1.9
The value true indicates that the video signal is muted for this Interface. false means the video signal is not muted.
                     ocStbHostIEEE1394ConnectedDevicesTable 1.3.6.1.4.1.4491.2.3.1.1.1.2.3.2
This table contains A/D Source Selection attributes associated to devices connected to the ocStbHost Interfaces of type IEEE 1394.
                         ocStbHostIEEE1394ConnectedDevicesEntry 1.3.6.1.4.1.4491.2.3.1.1.1.2.3.2.1
An entry exist in this table for each device connected to all Interfaces of the type IEEE 1394.
                             ocStbHostIEEE1394ConnectedDevicesIndex 1.3.6.1.4.1.4491.2.3.1.1.1.2.3.2.1.1
The unique identifier of the connected device entry.
                             ocStbHostIEEE1394ConnectedDevicesAVInterfaceIndex 1.3.6.1.4.1.4491.2.3.1.1.1.2.3.2.1.2
This object allows the manager to retrieve the index value associated with the IEEE1394 instance of ocStbHostAVInterfaceIndex to which the device is physically connected.
                             ocStbHostIEEE1394ConnectedDevicesSubUnitType 1.3.6.1.4.1.4491.2.3.1.1.1.2.3.2.1.3
This object allows the manager to retrieve the Subunit Type associated with the device connected to the ocStbHosts IEEE1394 interface.
                             ocStbHostIEEE1394ConnectedDevicesEui64 1.3.6.1.4.1.4491.2.3.1.1.1.2.3.2.1.4
This object allows the manager to retrieve the 64-bit Extended Unique Identifier (EUI-64) associated with the device connected to the ocStbHosts IEEE1394 interface.
                             ocStbHostIEEE1394ConnectedDevicesADSourceSelectSupport 1.3.6.1.4.1.4491.2.3.1.1.1.2.3.2.1.5
This object allows the manager to retrieve the status of Analog/Digital Source Selection support associated with the device connected to the ocStbHosts IEEE1394 interface. true indicates that the device supports A/D source selection.
                 ocStbHostDigitalVideoOutput 1.3.6.1.4.1.4491.2.3.1.1.1.2.4
                     ocStbHostDVIHDMITable 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1
This table allows the manager to retrieve information about the DVI/HDMI port of the ocStbHost.
                         ocStbHostDVIHDMIEntry 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1
An entry exists for each A/V interface of type HDMI or DVI of the ocStbHost.
                             ocStbHostDVIHDMIOutputType 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.2
This object defines the operational mode of the interface, where valid modes are dependant on the physical interface defined. If ocStbHostAVInterfaceIndex is DVI, then this value is always set to 1 (DVI). If ocStbHostAVInterfaceIndex is HDMI, then this value is either 1 (DVI) or 2 (HDMI).
                             ocStbHostDVIHDMIConnectionStatus 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.3
This object allows the manager to retrieve the state of the DVI/HDMI port on the device. true indicates that a device is connected to the ocStbHost.
                             ocStbHostDVIHDMIRepeaterStatus 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.4
This object allows the manager to retrieve the presence of a repeater connected to the ocStbHost. true indicates that a repeater is connected to the ocStbHost.
                             ocStbHostDVIHDMIVideoXmissionStatus 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.5
This object allows the manager to retrieve the state of video transmission over the DVI/HDMI port of the ocStbHost. true indicates that video is being transmitted over the DVI/HDMI link to a connected device.
                             ocStbHostDVIHDMIHDCPStatus 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.6
This object allows the manager to retrieve the state of the digital copy protection protocol in the interface. true indicates that HDCP encryption is enabled.
                             ocStbHostDVIHDMIVideoMuteStatus 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.7
The value true indicates that the video signal is being muted over the DVI/HDMI link. false means the video signal is not muted.
                             ocStbHostDVIHDMIOutputFormat 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.8
This object allows the manager to retrieve the video timing format currently being transmitted over the DVI/HDMI link.
                             ocStbHostDVIHDMIAspectRatio 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.9
This object allows the manager to retrieve the aspect ratio applicable to the video timing format currently being transmitted over the DVI/HDMI link. e.g., 4/3 or 16/9.
                             ocStbHostDVIHDMIHostDeviceHDCPStatus 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.10
Connected device HDCP status.
                             ocStbHostDVIHDMIAudioFormat 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.11
This object allows the manager to retrieve the audio format being transmitted over the HDMI link. If this entry corresponds to a DVI interface, this object is not instantiated.
                             ocStbHostDVIHDMIAudioSampleRate 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.12
This object allows the manager to retrieve the audio sample rate being transmitted over the HDMI link. If this entry corresponds to a DVI interface, this object is not instantiated.
                             ocStbHostDVIHDMIAudioChannelCount 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.13
This object allows the manager to retrieve the audio channel count being transmitted over the HDMI link. If this entry corresponds to a DVI interface, this object is not instantiated.
                             ocStbHostDVIHDMIAudioMuteStatus 1.3.6.1.4.1.4491.2.3.1.1.1.2.4.1.1.14
The value true indicates that the audio signal is muted over the DVI/HDMI link. false means the audio is not muted. This object is not instantiated for entries of ocStbHostDVIHDMIOutputType dvi.
                 ocStbHostAnalogOutput 1.3.6.1.4.1.4491.2.3.1.1.1.2.5
                     ocStbHostComponentVideoTable 1.3.6.1.4.1.4491.2.3.1.1.1.2.5.1
This table allows the manager to retrieve information about a Component Video interface of the ocStbHost.
                         ocStbHostComponentVideoEntry 1.3.6.1.4.1.4491.2.3.1.1.1.2.5.1.1
An entry for each interface of type ocStbHostComponentOut.
                             ocStbHostComponentVideoConstrainedStatus 1.3.6.1.4.1.4491.2.3.1.1.1.2.5.1.1.1
This object allows the manager to retrieve the state of Constrained Video Image on the port. True indicates that video is being constrained over the component video output port.
                             ocStbHostComponentOutputFormat 1.3.6.1.4.1.4491.2.3.1.1.1.2.5.1.1.2
This object allows the manager to retrieve the video format currently being transmitted over the Component Video output port.
                             ocStbHostComponentAspectRatio 1.3.6.1.4.1.4491.2.3.1.1.1.2.5.1.1.3
This object allows the manager to retrieve the video aspect ratio currently being transmitted over the Component Video output port.
                             ocStbHostComponentVideoMuteStatus 1.3.6.1.4.1.4491.2.3.1.1.1.2.5.1.1.4
The value true indicates that the video signal is muted for this Interface. false means the video signal is not muted.
                     ocStbHostRFChannelOutTable 1.3.6.1.4.1.4491.2.3.1.1.1.2.5.2
This table allows the manager to retrieve information about an RF channel output interface of the ocStbHost.
                         ocStbHostRFChannelOutEntry 1.3.6.1.4.1.4491.2.3.1.1.1.2.5.2.1
An entry for each interface of type ocStbHostRFOutCh.
                             ocStbHostRFChannelOut 1.3.6.1.4.1.4491.2.3.1.1.1.2.5.2.1.2
Indicates the RF channel out value. Typical values are 3 or 4 for Channels 3 and 4, respectively.
                             ocStbHostRFChannelOutAudioMuteStatus 1.3.6.1.4.1.4491.2.3.1.1.1.2.5.2.1.3
The value true indicates that the audio signal is muted for this Interface. false means the audio is not muted.
                             ocStbHostRFChannelOutVideoMuteStatus 1.3.6.1.4.1.4491.2.3.1.1.1.2.5.2.1.4
The value true indicates that the video signal is muted for this Interface. false means the video signal is not muted.
                 ocStbHostSPDIfTable 1.3.6.1.4.1.4491.2.3.1.1.1.2.6
This table allows the manager to retrieve information about the SONY, Philips Digital (SPD) Interface of the ocStbHost.
                     ocStbHostSPDIfEntry 1.3.6.1.4.1.4491.2.3.1.1.1.2.6.1
An entry exists for each Audio interface of type SPD.
                         ocStbHostSPDIfAudioFormat 1.3.6.1.4.1.4491.2.3.1.1.1.2.6.1.1
The format of the Audio stream transmitted over this interface.
                         ocStbHostSPDIfAudioMuteStatus 1.3.6.1.4.1.4491.2.3.1.1.1.2.6.1.2
The value true indicates that the audio signal is muted over the SPDIF link. false means the audio is not muted.
                 ocStbHostServiceProgramInfo 1.3.6.1.4.1.4491.2.3.1.1.1.2.7
                     ocStbHostInBandTunerTable 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1
This Object Table allows the manager to retrieve information regarding the In-Band tuner(s) in the ocStbHost.
                         ocStbHostInBandTunerEntry 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1
This entry contains information regarding a tuner of type ocStbHostScte40FatRx in the ocStbHost.
                             ocStbHostInBandTunerModulationMode 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.1
The In-band tuner modulation mode. Modulation modes are as follows: other - IB is configured in a manner not described by any other listed mode. Analog - IB is configured for analog service. QAM-64 - IB is configured for a digital service that is 64-QAM. QAM-256 - IB is configured for a digital service that is 256-QAM.
                             ocStbHostInBandTunerFrequency 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.2
This object allows the manager to retrieve the center frequency of the currently tuned channel in Hz.
                             ocStbHostInBandTunerInterleaver 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.3
The in-band interface interleaver value. set to 3 current operational mode taps64Increment2 set to 4 current operational mode taps128Increment1 set to 5 current operational mode taps128increment2 set to 6 current operational mode taps128increment3 set to 7 current operational mode taps128increment4 set to 8 current operational mode taps32increment4 set to 9 current operational mode taps16increment8 set to 10 current operational mode taps8increment16
                             ocStbHostInBandTunerPower 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.4
The received power level of this in-band interface.
                             ocStbHostInBandTunerAGCValue 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.5
This object allows the manager to retrieve the In-band channel AGC value (%). When an In-band Carrier Lock is indicated, a value of 0 (zero) indicates that the ocStbHost does not compute the value.
                             ocStbHostInBandTunerSNRValue 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.6
This object allows the manager to retrieve the In-band channel SNR value (1/10 dB). When an In-band Carrier Lock is indicated, a value of 0 (zero) indicates that the ocStbHost does not compute the value.
                             ocStbHostInBandTunerUnerroreds 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.7
Codewords received on this channel without error. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and at other times as indicated by the value of ifCounterDiscontinuityTime for the associated ifIndex.
                             ocStbHostInBandTunerCorrecteds 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.8
Codewords received on this in-band channel with correctable errors. Discontinuities in the value of this counter can occur at reinitialization of the managed system.
                             ocStbHostInBandTunerUncorrectables 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.9
Codewords received on this in-band channel with uncorrectable errors. Discontinuities in the value of this counter can occur at reinitialization of the managed system.
                             ocStbHostInBandTunerCarrierLockLost 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.10
The number of times the ocStbHost has detected carrier Lock is lost. Discontinuities in the value of this counter can occur at reinitialization of the managed system.
                             ocStbHostInBandTunerPCRErrors 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.11
The number of times the Program Clock Reference (PCR) detected Synchronization errors; e.g., wrong PCR from multiplexer, excessive CPR Jitter, etc. Discontinuities in the value of this counter can occur at reinitialization of the managed system.
                             ocStbHostInBandTunerPTSErrors 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.12
The number of Presentation TimeStamp (PTS) packets that encounter sequencing errors. Discontinuities in the value of this counter can occur at reinitialization of the managed system.
                             ocStbHostInBandTunerState 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.13
The In-band tuner current state. Modulation modes are as follows: ready - indicates that the tuner is in idle mode (not currently in use). waitingSync - indicates that the tuner is trying to find sync on an analog channel. waitingQam - indicates that the tuner is trying to tune to the desired QAM frequency and lock onto valid data. foundSync - indicates that the tuner has successfully tuned to an analog channel. foundQam - indicates that the tuner has successfully tuned to a digital channel.
                             ocStbHostInBandTunerBER 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.14
The average Bit Error Rate range since last tune to a digital channel. This value is determined by dividing the number of erroneous bits by the total number of bits transmitted since QAM lock. Report value of 7 if tuned to an analog channel.
                             ocStbHostInBandTunerSecsSinceLock 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.15
The amount of time, in seconds, since the last tuner lock on a valid data signal. Each time the tuner locks the ocStbHostInBandTunerUnerroreds, ocStbHostInBandTunerCorrecteds, and ocStbHostInBandTunerUncorrectables, counters should be set to 0.
                             ocStbHostInBandTunerEqGain 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.16
The value of the equalizer gain on the QAM data channel. A value of 0 (zero) indicates that the ocStbHost does not compute the value.
                             ocStbHostInBandTunerMainTapCoeff 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.1.1.17
The normalized main tap coefficient used for calibrating data path delay or frequency response. A value of 0 (zero) indicates that the ocStbHost does not compute the value.
                     ocStbHostProgramStatusTable 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.2
A table of current program content being forwarded by the ocStbHost.
                         ocStbHostProgramStatusEntry 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.2.1
There is an entry in this table for each active program content path. This means that the same program content source and/or destination can be associated to multiple A/V interface combinations as different entries in this table.
                             ocStbHostProgramIndex 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.2.1.1
Index for Program Status Entry Table.
                             ocStbHostProgramAVSource 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.2.1.2
Defines the source interface associated with this entry. Example sources are interfaces listed in the ifTable, interfaces listed in ocStbAVInterfaceTable, or a Host Resources Device such as a DVR. If the source corresponds to an entry in the ocStbAVInterfaceTable, this object reports the ocStbAVInterfaceType instance of the source interface. If the source corresponds to a resource listed in the ifTable, this object reports the ifIndex instance of the source interface. If the source corresponds to a resource listed in hrDeviceTable, this object reports the hrDeviceType instance of the source interface. Other table rows may be designated by this object as appropriate to the particular source.
                             ocStbHostProgramAVDestination 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.2.1.3
Defines the destination interface associated with this entry. Example destinations are interfaces listed in the ifTable, interfaces listed in ocStbAVInterfaceTable, or a Host Resource Device such as a DVR. If the destination corresponds to an entry in the ocStbAVInterfaceTable, this object reports the ocStbAVInterfaceType instance of the destination interface. If the destination corresponds to an interface listed in the ifTable, this object reports the ifIndex instance of the destination interface. If the destination corresponds to a resource listed in the hrDeviceTable, this object reports the hrDeviceType instance of the destination interface. Other table rows may be designated by this object as appropriate to the particular destination.
                             ocStbHostProgramContentSource 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.2.1.4
A pointer to the first visible object structure that defines the type of content associated to the A/V source interface. If the content is from an MPEG2 stream, this object points to the first visible object in ocStbHostMpeg2ContentEntry. Vendor-specific Content models may be defined in the vendor enterprise IANA assigned OID. This object reports zeroDotZero value if no content information is available.
                             ocStbHostProgramContentDestination 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.2.1.5
A pointer to the first visible object structure that defines the type of content associated to the A/V destination interface. For example, if the content for the destination interface is an MPEG2 stream (e.g., IEEE 1394 SPTS), this object points to the first visible object in ocStbHostMpeg2ContentEntry. Vendor-specific Content models may be defined in the vendor enterprise IANA assigned OID. This object reports zeroDotZero value if no content information is available.
                     ocStbHostMpeg2ContentTable 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3
Contains information associated to an MPEG-2 Program carried by an MPEG-2 transport stream. Entries in this table can be associated to interfaces receiving or forwarding MPEG-2 content.
                         ocStbHostMpeg2ContentEntry 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1
The conceptual row for this table.
                             ocStbHostMpeg2ContentIndex 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.1
The unique identifier for the Mpeg2 Content entries in this table.
                             ocStbHostMpeg2ContentProgramNumber 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.2
The program Number associated with active content within the ocStbHost.
                             ocStbHostMpeg2ContentTransportStreamID 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.3
Defines the transport stream ID associated with the program number.
                             ocStbHostMpeg2ContentTotalStreams 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.4
Defines the total number of elementary streams associated with the program number.
                             ocStbHostMpeg2ContentSelectedVideoPID 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.5
This object allows the manager to retrieve the PID associated to the selected video stream. The value -1 indicates that no video stream is being selected or identified. The value is the 13-bit PID value expressed in decimal.
                             ocStbHostMpeg2ContentSelectedAudioPID 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.6
The selected audio PID. The value -1 indicates no audio stream identified.
                             ocStbHostMpeg2ContentOtherAudioPIDs 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.7
Then value true indicates the MPEG-2 program has more than one audio PID. false indicates the MPEG-2 program has only one audio PID.
                             ocStbHostMpeg2ContentCCIValue 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.8
This value allows the manager to retrieve the encryption Mode Indication (EMI) Bits of the Copy Control Information (CCI) byte associated with the service.
                             ocStbHostMpeg2ContentAPSValue 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.9
This value allows the manager to retrieve the Analog Protection System (APS) bits of the Copy Control Information (CCI) byte associated with the service. type1 indicates AGC ON, split burst OFF type2 indicates AGC ON, 2-line split burst type3 indicates AGC ON, 4-line split burst.
                             ocStbHostMpeg2ContentCITStatus 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.10
This value allows the manager to retrieve the state of the Constrained Image Trigger(CIT). true indicates image constraint required. false indicates image constraint not asserted.
                             ocStbHostMpeg2ContentBroadcastFlagStatus 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.11
This value allows the manager to retrieve the state of Broadcast Flag in the source interface. true indicates Broadcast Flag present. false indicates Broadcast Flag not present.
                             ocStbHostMpeg2ContentEPNStatus 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.12
This object allows the manager to retrieve the EPN status of the MPEG stream. true indicates that EPN is asserted.
                             ocStbHostMpeg2ContentPCRPID 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.13
This object allows the manager to retrieve the PCR PID associated to the selected video stream. The value -1 indicates that no video stream is being selected or identified. The value is the 13-bit PCR PID value expressed in decimal.
                             ocStbHostMpeg2ContentPCRLockStatus 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.14
The status of the Program Clock Reference lock.
                             ocStbHostMpeg2ContentDecoderPTS 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.15
The value of the MPEG decoder Presentation TimeStamp (PTS).
                             ocStbHostMpeg2ContentDiscontinuities 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.16
The sum of the audio and video PID discontinuities detected on the MPEG stream. The values are based on the time since PCR lock on the current PIDs or stream being reported
                             ocStbHostMpeg2ContentPktErrors 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.17
The number of errors detected in the MPEG stream. The Values are based on the time since PCR lock on the Current PIDs or stream being reported
                             ocStbHostMpeg2ContentPipelineErrors 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.18
The number of errors reported exclusively by the MPEG decoder.
                             ocStbHostMpeg2ContentDecoderRestarts 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.3.1.19
The number of times the software driver restarted the MPEG decoding process.
                     ocStbHostAnalogVideoTable 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.4
Contains information about the Analog Video signal. Entries in this table can be associated to interfaces receiving or forwarding analog content.
                         ocStbHostAnalogVideoEntry 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.4.1
The conceptual row for this table.
                             ocStbHostAnalogVideoProtectionStatus 1.3.6.1.4.1.4491.2.3.1.1.1.2.7.4.1.1
The analog protection system (APS) of this Video content entry. The possible values are: copyProtectionOff means the Macrovision Analog protection is off splitBurstOff means the AGC (Automatic Gain Control) is on and the split burst is off. twoLineSplitBurst means AGC is on with two-line split burst. fourLineSplitBurst means AGC is on with four-line split burst. This object is instantiated only for A/V output interfaces that support APS like but not limited to: ocStbHostRfOutCh, ocStbHostSVideoOut and ocStbHostBbVideoOut. The A/V interfaces ocStbHostComponentOut only support splitBurstOff APS mode for the video formats format480i and format480p.
                 ocStbHostQpskObjects 1.3.6.1.4.1.4491.2.3.1.1.1.2.8
                     ocStbHostQpskFDCFreq 1.3.6.1.4.1.4491.2.3.1.1.1.2.8.1
The frequency to which the QPSK receiver is currently tuned.
                     ocStbHostQpskRDCFreq 1.3.6.1.4.1.4491.2.3.1.1.1.2.8.2
The frequency to which the QPSK transmitter is currently tuned.
                     ocStbHostQpskFDCBer 1.3.6.1.4.1.4491.2.3.1.1.1.2.8.3
The rate at which bit errors are occurring based on the number of data errors since the frequency has been locked.
                     ocStbHostQpskFDCStatus 1.3.6.1.4.1.4491.2.3.1.1.1.2.8.4
Forward data channel lock status.
                     ocStbHostQpskFDCBytesRead 1.3.6.1.4.1.4491.2.3.1.1.1.2.8.5
The number of bytes successfully read since the frequency was locked.
                     ocStbHostQpskFDCPower 1.3.6.1.4.1.4491.2.3.1.1.1.2.8.6
The power level, in dBmV, of the forward data channel.
                     ocStbHostQpskFDCLockedTime 1.3.6.1.4.1.4491.2.3.1.1.1.2.8.7
The number of seconds that the current FDC frequency has been locked.
                     ocStbHostQpskFDCSNR 1.3.6.1.4.1.4491.2.3.1.1.1.2.8.8
This object allows the manager to retrieve the FDC SNR value (1/10 dB).
                     ocStbHostQpskAGC 1.3.6.1.4.1.4491.2.3.1.1.1.2.8.9
This object allows the manager to retrieve the OOB channel Automatic Gain Control value (%).
                     ocStbHostQpskRDCPower 1.3.6.1.4.1.4491.2.3.1.1.1.2.8.10
The power output level, in dBmV, of the QPSK transmitter.
                     ocStbHostQpskRDCDataRate 1.3.6.1.4.1.4491.2.3.1.1.1.2.8.11
The data rate (in kbps) of the RDC.
             ocStbHostEasObjects 1.3.6.1.4.1.4491.2.3.1.1.1.3
                 ocStbHostEasCodes 1.3.6.1.4.1.4491.2.3.1.1.1.3.1
                     ocStbEasMessageStateCode 1.3.6.1.4.1.4491.2.3.1.1.1.3.1.1
This object allows the manager to retrieve the EAS State Code utilized by the STB. A value of 0 indicates that the code is not defined, thus the eSTB does not discriminate any State Code defined in an EAS message.
                     ocStbEasMessageCountyCode 1.3.6.1.4.1.4491.2.3.1.1.1.3.1.2
This object allows the manager to retrieve the EAS County Code utilized by the STB. A value of 0 indicates that the code is not defined, thus the eSTB ignores any County Code defined in an EAS message.
                     ocStbEasMessageCountySubdivisionCode 1.3.6.1.4.1.4491.2.3.1.1.1.3.1.3
This object allows the manager to retrieve the EAS County Sub Code utilized by the STB. A value of 0 indicates that the code is not defined, thus the eSTB ignores it and any County Subdivision Code defined in an EAS message is accepted.
         ocStbHostSecuritySubSystem 1.3.6.1.4.1.4491.2.3.1.1.2
             ocStbHostSecurityIdentifier 1.3.6.1.4.1.4491.2.3.1.1.2.2
The security identifier of the ocStbHost. This object represents the 40-bit Host_ID obtained from the Host x509 certificate.
             ocStbHostCASystemIdentifier 1.3.6.1.4.1.4491.2.3.1.1.2.3
Conditional access system identifier defined by DVB and MPEG. This object represents the 16-bit CA_system_id obtained from the ca_info_reply apdu.
             ocStbHostCAType 1.3.6.1.4.1.4491.2.3.1.1.2.4
The Conditional Access (CA) supported by the host device. other means a CA which is not described by one of the other enumerations in this list. embedded means a vendor-specific embedded CA cablecard means OpenCable CableCARD is supported. dcas means software downloadable CA is supported.
         ocStbHostSoftware 1.3.6.1.4.1.4491.2.3.1.1.3
             ocStbHostDeviceSoftwareBase 1.3.6.1.4.1.4491.2.3.1.1.3.1
                 ocStbHostSoftwareFirmwareVersion 1.3.6.1.4.1.4491.2.3.1.1.3.1.1
The platform code software version currently operating in this device. This object should be in the syntax used by the individual vendor to identify software versions. The device must return a string descriptive of the current software load. This object is shared with docsDevSwCurrentVers.
                 ocStbHostSoftwareOCAPVersion 1.3.6.1.4.1.4491.2.3.1.1.3.1.2
This object returns a string indicating the latest version of the OCAP profile supported by this device, e.g., 1.0.
             ocStbHostFirmwareDownloadStatus 1.3.6.1.4.1.4491.2.3.1.1.3.2
                 ocStbHostFirmwareImageStatus 1.3.6.1.4.1.4491.2.3.1.1.3.2.1
This object details the image status recently downloaded imageAuthorized means the image is valid. imageCorrupted means the image is invalid. imageCertFailure means CVC authentication has failed. imageMaxDownloadRetry means the maximum number of code file download retries has been reached. When the value of this object is imageMaxDownloadRetry(4), the value of ocStbHostSoftwareCodeDownloadStatus must be downloadingFailed(3). imageMaxRebootRetry means the maximum number of reboots has occurred after code file download.
                 ocStbHostFirmwareCodeDownloadStatus 1.3.6.1.4.1.4491.2.3.1.1.3.2.2
This object details the download status of the target image. downloadingComplete means the image download was successful. downloadingFailed means the image download failed.
                 ocStbHostFirmwareCodeObjectName 1.3.6.1.4.1.4491.2.3.1.1.3.2.3
The file name of the software image to be loaded into this device. This object value may optionally contain server and path information about the file name when applicable. If unknown, the string (unknown) is returned. This object is shared with docsDevSwFilename.
                 ocStbHostFirmwareDownloadFailedStatus 1.3.6.1.4.1.4491.2.3.1.1.3.2.4
This object details the firmware download failed status codes. cdlError1, No Failure cdlError2, Improper code file controls - CVC subject organizationName for manufacturer does not match the Host device manufacturer name cdlError3, Improper code file controls - CVC subject organizationName for code cosigning agent does not match the Host device current code cosigning agent. cdlError4, Improper code file controls - The manufacturers PKCS #7 signingTime value is equal-to or less-than the codeAccessStart value currently held in the Host device. cdlError5, Improper code file controls - The manufacturers PKCS #7 validity start time value is less-than the cvcAccessStart value currently held in the Host device. cdlError6, Improper code file controls - The manufacturers CVC validity start time is less-than the cvcAccessStart value currently held in the Host device. cdlError7, Improper code file controls - The manufacturers PKCS #7 signingTime value is less-than the CVC validity start time. cdlError8, Improper code file controls - Missing or improper extendedKeyUsage extension in the manufacturer CVC. cdlError9, Improper code file controls - The cosigners PKCS #7 signingTime value is equal-to or less-than the codeAccessStart value currently held in the Host device. cdlError10, Improper code file controls - The cosigners PKCS #7 validity start time value is less-than the cvcAccessStart value currently held in the Host device. cdlError11, Improper code file controls - The cosigners CVC validity start time is less-than the cvcAccessStart value currently held in the Host device. cdlError12, Improper code file controls - The cosigners PKCS #7 signingTime value is less-than the CVC validity start time. cdlError13, Improper code file controls - Missing or improper extended key-usage extension in the cosigners CVC. cdlError14, Code file manufacturer CVC validation failure. cdlError15, Code file manufacturer CVS validation failure. cdlError16, Code file cosigner CVC validation failure. cdlError17, Code file cosigner CVS validation failure. cdlError18, Improper eCM configuration file CVC format (e.g., missing or improper key usage attribute). cdlError19, eCM configuration file CVC validation failure. cdlError20, Improper SNMP CVC format. cdlError21, CVC subject organizationName for manufacturer does not match the Host devices manufacturer name. cdlError22, CVC subject organizationName for code cosigning agent does not match the Host devices current code cosigning agent. cdlError23, The CVC validity start time is less-than or equal-to the corresponding subjects cvcAccessStart value currently held in the Host device. cdlError24, Missing or improper key usage attribute. cdlError25, SNMP CVC validation failure.
             ocStbHostSoftwareApplicationInfo 1.3.6.1.4.1.4491.2.3.1.1.3.3
                 ocStbHostSoftwareApplicationInfoTable 1.3.6.1.4.1.4491.2.3.1.1.3.3.1
This table allows the manager to display and retrieve self-diagnostic software information of all available applications.
                     ocStbHostSoftwareApplicationInfoEntry 1.3.6.1.4.1.4491.2.3.1.1.3.3.1.1
An entry exists for each available application.
                         ocStbHostSoftwareAppNameString 1.3.6.1.4.1.4491.2.3.1.1.3.3.1.1.1
The applications name string.
                         ocStbHostSoftwareAppVersionNumber 1.3.6.1.4.1.4491.2.3.1.1.3.3.1.1.2
The applications version number.
                         ocStbHostSoftwareStatus 1.3.6.1.4.1.4491.2.3.1.1.3.3.1.1.3
The software status of the application.
                         ocStbHostSoftwareApplicationInfoIndex 1.3.6.1.4.1.4491.2.3.1.1.3.3.1.1.4
Table Index added in this position (4) because it replaced an external index.
         ocStbHostStatus 1.3.6.1.4.1.4491.2.3.1.1.4
             ocStbHostPower 1.3.6.1.4.1.4491.2.3.1.1.4.1
                 ocStbHostPowerStatus 1.3.6.1.4.1.4491.2.3.1.1.4.1.1
Indicates the current power status of the ocStbHost.
                 ocStbHostAcOutletStatus 1.3.6.1.4.1.4491.2.3.1.1.4.1.2
Indicates the AC accessory power outlet status of the ocStbHost. unSwitched Indicates AC accessory power outlet is present and provides power as long as the ocStbHost is connected to a powered AC outlet. switchedOn Indicates the AC accessory power outlet is currently switched to ON and provides power as long as the value of ocStbHostPowerStatus is powerOn. switchedOff Indicates the AC accessory power outlet is currently switched to OFF and does not provide power. notInstalled Indicates no AC accessory power outlet is present in the ocStbHost.
             ocStbHostUserSettings 1.3.6.1.4.1.4491.2.3.1.1.4.2
                 ocStbHostUserSettingsPreferedLanguage 1.3.6.1.4.1.4491.2.3.1.1.4.2.1
The preferred language of the audio streams indicated as the 3-octet code specified in ISO 639-2.
             ocStbHostSystemObjects 1.3.6.1.4.1.4491.2.3.1.1.4.3
                 ocStbHostSystemTempTable 1.3.6.1.4.1.4491.2.3.1.1.4.3.1
This table contains the temperature sensors of the ocStbHost.
                     ocStbHostSystemTempEntry 1.3.6.1.4.1.4491.2.3.1.1.4.3.1.1
Conceptual row of a temperature sensor device associated with a Host Resource device (e.g. DVR) of the ocStbHost.
                         ocStbHostSystemTempIndex 1.3.6.1.4.1.4491.2.3.1.1.4.3.1.1.1
The identifier of the temperature sensor for the corresponding hrDeviceIdx.
                         ocStbHostSystemTempDescr 1.3.6.1.4.1.4491.2.3.1.1.4.3.1.1.2
The text containing information about the temperature sensor.
                         ocStbHostSystemTempValue 1.3.6.1.4.1.4491.2.3.1.1.4.3.1.1.3
The temperature measured by the sensor. If the temperature sensor does not report a value, this object indicates a value of 0.
                         ocStbHostSystemTempLastUpdate 1.3.6.1.4.1.4491.2.3.1.1.4.3.1.1.4
The value of sysUpTime of the last time this value was measured by the ocStbHost. A value 0 means the temperature value is invalid.
                 ocStbHostSystemHomeNetworkTable 1.3.6.1.4.1.4491.2.3.1.1.4.3.2
This table contains info about Home Network Clients connected to the ocStbHost.
                     ocStbHostSystemHomeNetworkEntry 1.3.6.1.4.1.4491.2.3.1.1.4.3.2.1
Conceptual row of a Home Network device ocStbHost support/status.
                         ocStbHostSystemHomeNetworkIndex 1.3.6.1.4.1.4491.2.3.1.1.4.3.2.1.1
The identifier of the Home network Client connected to the ocStbHost.
                         ocStbHostSystemHomeNetworkMaxClients 1.3.6.1.4.1.4491.2.3.1.1.4.3.2.1.2
Maximum number of clients the Host can support. NOTE: If the Host does not support home network clients, then it SHALL report 0x00.
                         ocStbHostSystemHomeNetworkHostDRMStatus 1.3.6.1.4.1.4491.2.3.1.1.4.3.2.1.3
The ocStbHost support for Digital Right Management (DRM).
                         ocStbHostSystemHomeNetworkConnectedClients 1.3.6.1.4.1.4491.2.3.1.1.4.3.2.1.4
The number of Home Network Clients currently connected to the ocStbHost.
                         ocStbHostSystemHomeNetworkClientMacAddress 1.3.6.1.4.1.4491.2.3.1.1.4.3.2.1.5
The MAC address of Home Network Client.
                         ocStbHostSystemHomeNetworkClientIpAddress 1.3.6.1.4.1.4491.2.3.1.1.4.3.2.1.6
The Ip address of Home Network Client.
                         ocStbHostSystemHomeNetworkClientDRMStatus 1.3.6.1.4.1.4491.2.3.1.1.4.3.2.1.7
The Home Network Clients support for Digital Rights Management (DRM).
                 ocStbHostSystemMemoryReportTable 1.3.6.1.4.1.4491.2.3.1.1.4.3.3
This table contains the Id of each memory type reported by the ocStbHost.
                     ocStbHostSystemMemoryReportEntry 1.3.6.1.4.1.4491.2.3.1.1.4.3.3.1
Conceptual row of a memory type reported by the ocStbHost.
                         ocStbHostSystemMemoryReportIndex 1.3.6.1.4.1.4491.2.3.1.1.4.3.3.1.1
The identifier of the memory type.
                         ocStbHostSystemMemoryReportMemoryType 1.3.6.1.4.1.4491.2.3.1.1.4.3.3.1.2
Designates the type of memory that is being reported.
                         ocStbHostSystemMemoryReportMemorySize 1.3.6.1.4.1.4491.2.3.1.1.4.3.3.1.3
Designates the physical size of the reported memory type. The units are kilobytes, defined to be 1,024 bytes.
             ocStbCardInfo 1.3.6.1.4.1.4491.2.3.1.1.4.4
                 ocStbHostCardMacAddress 1.3.6.1.4.1.4491.2.3.1.1.4.4.1
The Mac Address associated with the Card.
                 ocStbHostCardIpAddressType 1.3.6.1.4.1.4491.2.3.1.1.4.4.2
The network address Type of ocStbHostCardIpAddress.
                 ocStbHostCardIpAddress 1.3.6.1.4.1.4491.2.3.1.1.4.4.3
The network address of the Card.
                 ocStbHostCCMMI 1.3.6.1.4.1.4491.2.3.1.1.4.4.5
                     ocStbHostCCApplications 1.3.6.1.4.1.4491.2.3.1.1.4.4.5.1
                         ocStbHostCCAppInfoTable 1.3.6.1.4.1.4491.2.3.1.1.4.4.5.1.1
This table allows the manager to retrieve the HTML pages for Card applications retrieved by the Host using the Application Info resource.
                             ocStbHostCCAppInfoEntry 1.3.6.1.4.1.4491.2.3.1.1.4.4.5.1.1.1
The conceptual row for this table.
                                 ocStbHostCCAppInfoIndex 1.3.6.1.4.1.4491.2.3.1.1.4.4.5.1.1.1.1
This object was the index for this table in a previous version of the MIB. Currently used only as a placeholder to avoid changing OID values.
                                 ocStbHostCCApplicationType 1.3.6.1.4.1.4491.2.3.1.1.4.4.5.1.1.1.2
Index for this table. Contains the application_type field in the application_info_cnf() APDU.
                                 ocStbHostCCApplicationName 1.3.6.1.4.1.4491.2.3.1.1.4.4.5.1.1.1.3
Contains the application name.
                                 ocStbHostCCApplicationVersion 1.3.6.1.4.1.4491.2.3.1.1.4.4.5.1.1.1.4
Contains the application version.
                                 ocStbHostCCAppInfoPage 1.3.6.1.4.1.4491.2.3.1.1.4.4.5.1.1.1.5
All HTML data for this application. If a page as reported from the Card contains links, the links shall be traversed, and all HTML from each page traversed shall be included in a single, valid HTML string (with per-page start/end HTML and BODY tags removed). The resulting HTML SHOULD be structured as an HTML table consisting of one column, with one row for each page from the Card. If the full HTML from the application (all pages concatenated) will not fit within the SNMP buffer, text indicating this SHALL follow the table; otherwise nothing except the close BODY and HTML tags SHOULD follow the table.
             ocStbHostInfo 1.3.6.1.4.1.4491.2.3.1.1.4.5
                 ocStbHostIpAddressType 1.3.6.1.4.1.4491.2.3.1.1.4.5.1
This object was the address type for ocStbHostIpAddress, which was never implemented in a previous version of the MIB. Currently used only as a placeholder to avoid changing OID values.
                 ocStbHostIpSubNetMask 1.3.6.1.4.1.4491.2.3.1.1.4.5.2
The IP subnet mask of the Host address.
             ocStbHostRebootInfo 1.3.6.1.4.1.4491.2.3.1.1.4.6
                 ocStbHostRebootType 1.3.6.1.4.1.4491.2.3.1.1.4.6.1
Describes the type of reboot that occurred the last time the host device rebooted. Unknown(0), unknown reboot. 0 is used as a sentinel value to denote that the reboot reporting mechanism is initialized and ready for use. If it appears in a reboot report as a reboot reason, it means that something (of unknown cause) prevented a reboot reason from being saved. This is a spontaneous reboot. Davic/DOCSIS(1), Davic/DOCSIS switch. The set-top rebooted because the network switched from Davic to DOCSIS or vice versa. This is a controlled reboot. User(2), User reboot. The set-top rebooted at the specific request of the user, typically the MSO, but can also be the subscriber. Includes, but not limited to, headend-initiated reboots, pass-thru and SNMP messages to reboot, new application versions that require a reboot in order to reload, the staging toolkit, hard disk re-format requests, CableCARD inserted or firmware upgrade, and more. This is a controlled reboot. System(3), System reboot. The set-top rebooted because its software determined it cannot continue operation. This can be due to any number of reasons, including: detection of logic errors, exhaustion of various system resources, detection of memory corruption, and more. This is a spontaneous reboot. Trap(4), Trap reboot. A fatal error detected by the CPU. This varies between CPU manufacturers; some possible causes are illegal address references, misaligned instruction or data access, memory protection violations, attempt to decode an unrecognized instruction, etc. This is a spontaneous reboot. Silent or Watchdog(5). Depending on platform, this is either a Silent Reboot (A reboot of unknown origin that reports no information) or a Watchdog reboot. This is a spontaneous reboot. Bootloader(6), Bootloader reboot. For use by bootloader software. This is a spontaneous reboot. PowerUp(7), Power-up reboot. The set-top rebooted because power was lost and then restored. This is a controlled reboot. Upgrade(8), Upgrade Reboot due to loading new resident set-top software. This is a controlled reboot. Hardware(9), Hardware Reset reboot. This depends on the design of a particular set-top. It might be due to a hardware reset line being triggered or by a button push of some kind. Manufacturers sometimes provide a way to hard reset a box besides removing power. This is a spontaneous reboot. CablecardError(10), CablecardError. The Host rebooted because the communication with the CableCARD was lost and could not be reestablished.
                 ocStbHostRebootReset 1.3.6.1.4.1.4491.2.3.1.1.4.6.2
Setting this object to true(1) causes the device to reset, equivalent to a power reset. Reading this object always returns false(2).
             ocStbHostMemoryInfo 1.3.6.1.4.1.4491.2.3.1.1.4.7
                 ocStbHostLargestAvailableBlock 1.3.6.1.4.1.4491.2.3.1.1.4.7.1
The largest available continuous block of DRAM available on the host device, in kilobytes.
                 ocStbHostTotalVideoMemory 1.3.6.1.4.1.4491.2.3.1.1.4.7.2
The total amount of DRAM dedicated to video decoding and display on the host device, in kilobytes.
                 ocStbHostAvailableVideoMemory 1.3.6.1.4.1.4491.2.3.1.1.4.7.3
The total amount of DRAM dedicated to video decoding and display on the host device that is not allocated and available for use, in kilobytes.
             ocStbHostJVMInfo 1.3.6.1.4.1.4491.2.3.1.1.4.8
                 ocStbHostJVMHeapSize 1.3.6.1.4.1.4491.2.3.1.1.4.8.1
The total amount of DRAM allocated to the Java Virtual Machine heap. The units are kilobytes, defined to be 1,024 bytes.
                 ocStbHostJVMAvailHeap 1.3.6.1.4.1.4491.2.3.1.1.4.8.2
The amount of DRAM in the Java Virtual Machine heap that is not allocated and is available for use. The units are kilobytes, defined to be 1,024 bytes.
                 ocStbHostJVMLiveObjects 1.3.6.1.4.1.4491.2.3.1.1.4.8.3
The number of active object instances in the Java Virtual Machine that are reachable from running code.
                 ocStbHostJVMDeadObjects 1.3.6.1.4.1.4491.2.3.1.1.4.8.4
The number of object instances in the Java Virtual Machine that are NOT reachable from running Code.
     ocStbHostConformance 1.3.6.1.4.1.4491.2.3.1.2
         ocStbHostMIBCompliances 1.3.6.1.4.1.4491.2.3.1.2.1
             ocStbHostMIBCompliance 1.3.6.1.4.1.4491.2.3.1.2.1.1
The requirements for conformance to the OpenCable Set-top HOST MIB.
         ocStbHostMIBGroups 1.3.6.1.4.1.4491.2.3.1.2.2
             ocStbHostSystemGroup 1.3.6.1.4.1.4491.2.3.1.2.2.1
Defines the objects contained with the ocStbHost System Group.
             ocStbHostSoftwareGroup 1.3.6.1.4.1.4491.2.3.1.2.2.2
The ocStbHost Software group.
             ocStbHostStatusGroup 1.3.6.1.4.1.4491.2.3.1.2.2.3
The object group related to multiple ocStbHost status.
             ocStbHostSecuritySubSystemGroup 1.3.6.1.4.1.4491.2.3.1.2.2.4
The ocStbHost Security Subsystem group.