Nortel-MsCarrier-MscPassport-FileSystemMIB: View SNMP OID List / Download MIB

VENDOR: NORTHERN TELECOM


 Home MIB: Nortel-MsCarrier-MscPassport-FileSystemMIB
Download as:   
SNMPv2-CONF, Nortel-MsCarrier-MscPassport-TextualConventionsMIB, SNMPv2-SMI, Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB, Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 mscFs 1.3.6.1.4.1.562.36.2.1.15
       mscFsRowStatusTable 1.3.6.1.4.1.562.36.2.1.15.1 no-access
This entry controls the addition and deletion of mscFs components.
           mscFsRowStatusEntry 1.3.6.1.4.1.562.36.2.1.15.1.1 no-access
A single entry in the table represents a single mscFs component.
               mscFsRowStatus 1.3.6.1.4.1.562.36.2.1.15.1.1.1 rowstatus read-only
This variable is used as the basis for SNMP naming of mscFs components. These components cannot be added nor deleted.
               mscFsComponentName 1.3.6.1.4.1.562.36.2.1.15.1.1.2 displaystring read-only
This variable provides the component's string name for use with the ASCII Console Interface
               mscFsStorageType 1.3.6.1.4.1.562.36.2.1.15.1.1.4 storagetype read-only
This variable represents the storage type value for the mscFs tables.
               mscFsIndex 1.3.6.1.4.1.562.36.2.1.15.1.1.10 nonreplicated no-access
This variable represents the index for the mscFs tables.
       mscFsDisk 1.3.6.1.4.1.562.36.2.1.15.2
           mscFsDiskRowStatusTable 1.3.6.1.4.1.562.36.2.1.15.2.1 no-access
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscFsDisk components.
               mscFsDiskRowStatusEntry 1.3.6.1.4.1.562.36.2.1.15.2.1.1 no-access
A single entry in the table represents a single mscFsDisk component.
                   mscFsDiskRowStatus 1.3.6.1.4.1.562.36.2.1.15.2.1.1.1 rowstatus read-only
This variable is used as the basis for SNMP naming of mscFsDisk components. These components cannot be added nor deleted.
                   mscFsDiskComponentName 1.3.6.1.4.1.562.36.2.1.15.2.1.1.2 displaystring read-only
This variable provides the component's string name for use with the ASCII Console Interface
                   mscFsDiskStorageType 1.3.6.1.4.1.562.36.2.1.15.2.1.1.4 storagetype read-only
This variable represents the storage type value for the mscFsDisk tables.
                   mscFsDiskIndex 1.3.6.1.4.1.562.36.2.1.15.2.1.1.10 integer32 no-access
This variable represents the index for the mscFsDisk tables.
           mscFsDiskTest 1.3.6.1.4.1.562.36.2.1.15.2.2
               mscFsDiskTestRowStatusTable 1.3.6.1.4.1.562.36.2.1.15.2.2.1 no-access
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscFsDiskTest components.
                   mscFsDiskTestRowStatusEntry 1.3.6.1.4.1.562.36.2.1.15.2.2.1.1 no-access
A single entry in the table represents a single mscFsDiskTest component.
                       mscFsDiskTestRowStatus 1.3.6.1.4.1.562.36.2.1.15.2.2.1.1.1 rowstatus read-only
This variable is used as the basis for SNMP naming of mscFsDiskTest components. These components cannot be added nor deleted.
                       mscFsDiskTestComponentName 1.3.6.1.4.1.562.36.2.1.15.2.2.1.1.2 displaystring read-only
This variable provides the component's string name for use with the ASCII Console Interface
                       mscFsDiskTestStorageType 1.3.6.1.4.1.562.36.2.1.15.2.2.1.1.4 storagetype read-only
This variable represents the storage type value for the mscFsDiskTest tables.
                       mscFsDiskTestIndex 1.3.6.1.4.1.562.36.2.1.15.2.2.1.1.10 nonreplicated no-access
This variable represents the index for the mscFsDiskTest tables.
               mscFsDiskTestStateTable 1.3.6.1.4.1.562.36.2.1.15.2.2.10 no-access
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
                     mscFsDiskTestStateEntry 1.3.6.1.4.1.562.36.2.1.15.2.2.10.1 no-access
An entry in the mscFsDiskTestStateTable.
                         mscFsDiskTestAdminState 1.3.6.1.4.1.562.36.2.1.15.2.2.10.1.1 integer read-only
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. Enumeration: 'locked': 0, 'shuttingDown': 2, 'unlocked': 1.
                         mscFsDiskTestOperationalState 1.3.6.1.4.1.562.36.2.1.15.2.2.10.1.2 integer read-only
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. Enumeration: 'disabled': 0, 'enabled': 1.
                         mscFsDiskTestUsageState 1.3.6.1.4.1.562.36.2.1.15.2.2.10.1.3 integer read-only
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. Enumeration: 'active': 1, 'idle': 0, 'busy': 2.
               mscFsDiskTestSetupTable 1.3.6.1.4.1.562.36.2.1.15.2.2.11 no-access
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the Test component operational data. The testCount, duration and type can be set to control the duration and the test type which will be run.
                     mscFsDiskTestSetupEntry 1.3.6.1.4.1.562.36.2.1.15.2.2.11.1 no-access
An entry in the mscFsDiskTestSetupTable.
                         mscFsDiskTestTestCount 1.3.6.1.4.1.562.36.2.1.15.2.2.11.1.1 unsigned32 read-write
This attribute indicates the number of times that the test will run. Note that the test will not run that many times if 'duration' is not long enough to allow the test to complete. The test will execute at least one and then stop at the count where duration has just exceeded.
                         mscFsDiskTestDuration 1.3.6.1.4.1.562.36.2.1.15.2.2.11.1.2 unsigned32 read-write
This attribute is the maximum duration (in minutes) that the test will run. The test can finish in less time if the number of tests, as recorded by testCount, is reached before this time. A test may take longer than the specified duration since a test cycle (or pass) is not interruptible.
                         mscFsDiskTestType 1.3.6.1.4.1.562.36.2.1.15.2.2.11.1.3 integer read-write
This attribute is the type of the test to be run. The diskRead test reads every sector on the disk once and reports bad sectors. The filesystemCheck does a sanity check and attempts to repair corruption. The flakyBitDetection test reads every sector on the disk twice and compares the two read results. The surfaceAnalysis test writes a magnetically hard to record pattern to the disk and reads back the pattern to determine the condition of the magnetic surface of the disk. The surface analysis test destroys all the data and disk should be formatted afterward. Enumeration: 'flakyBitDetection': 2, 'surfaceAnalysis': 3, 'filesystemCheck': 0, 'diskRead': 1.
               mscFsDiskTestResultsTable 1.3.6.1.4.1.562.36.2.1.15.2.2.12 no-access
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the results of the test.
                     mscFsDiskTestResultsEntry 1.3.6.1.4.1.562.36.2.1.15.2.2.12.1 no-access
An entry in the mscFsDiskTestResultsTable.
                         mscFsDiskTestCauseOfTermination 1.3.6.1.4.1.562.36.2.1.15.2.2.12.1.1 integer read-only
This attribute records the reason why the test was terminated. The reasons are: testCountReached: the test ran the number of times specified in the attribute testCount and ended normally. error: the test was terminated by an error that is recorded in the natureOfError attribute. neverStarted: the test was never started. stoppedByOperator: the test was terminated by the Stop command. testTimeExpired: the duration of the test expired. testRunning: the test is still running. unknown: the test terminated for unknown reasons. internalError: An internal error terminated the test. Enumeration: 'unknown': 7, 'stoppedByOperator': 2, 'internalError': 6, 'testTimeExpired': 1, 'neverStarted': 3, 'error': 5, 'testCountReached': 0, 'testRunning': 4.
                         mscFsDiskTestNatureOfError 1.3.6.1.4.1.562.36.2.1.15.2.2.12.1.2 integer read-only
This attribute describes the error found by a test. A logical error can be fixed by a filesystemCheck test followed eventually by a synchronization. A media error indicates that a fault in the disk hardware is suspected. A failedToComplete error indicates that the test was terminated. Enumeration: 'media': 1, 'noErrorDetected': 2, 'logical': 0, 'failedToComplete': 3.
                         mscFsDiskTestSeverity 1.3.6.1.4.1.562.36.2.1.15.2.2.12.1.3 integer read-only
This attribute describes the severity of the error found by a test. There are three types of severity: no data was lost, data was lost and hardware problem. If the test found no error(s), this will be reported as noError. If the test found error(s) but no data was lost, then noDataLost is reported. Enumeration: 'dataLost': 1, 'noError': 3, 'hardwareProblem': 2, 'noDataLost': 0.
                         mscFsDiskTestElapsedTime 1.3.6.1.4.1.562.36.2.1.15.2.2.12.1.4 unsigned32 read-only
This attribute records the elapsed time (in minutes) since the test was started.
                         mscFsDiskTestTestExecutionCount 1.3.6.1.4.1.562.36.2.1.15.2.2.12.1.5 unsigned32 read-only
The number of times the test had actually run.
           mscFsDiskStateTable 1.3.6.1.4.1.562.36.2.1.15.2.10 no-access
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
                 mscFsDiskStateEntry 1.3.6.1.4.1.562.36.2.1.15.2.10.1 no-access
An entry in the mscFsDiskStateTable.
                     mscFsDiskAdminState 1.3.6.1.4.1.562.36.2.1.15.2.10.1.1 integer read-only
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. Enumeration: 'locked': 0, 'shuttingDown': 2, 'unlocked': 1.
                     mscFsDiskOperationalState 1.3.6.1.4.1.562.36.2.1.15.2.10.1.2 integer read-only
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. Enumeration: 'disabled': 0, 'enabled': 1.
                     mscFsDiskUsageState 1.3.6.1.4.1.562.36.2.1.15.2.10.1.3 integer read-only
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. Enumeration: 'active': 1, 'idle': 0, 'busy': 2.
           mscFsDiskOperTable 1.3.6.1.4.1.562.36.2.1.15.2.11 no-access
*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the disk component operational data.
                 mscFsDiskOperEntry 1.3.6.1.4.1.562.36.2.1.15.2.11.1 no-access
An entry in the mscFsDiskOperTable.
                     mscFsDiskVolumeName 1.3.6.1.4.1.562.36.2.1.15.2.11.1.1 asciistring read-write
This attribute describes the volume name of the disk. The volume names of the two disks must be identical to be synchronized.
                     mscFsDiskCapacity 1.3.6.1.4.1.562.36.2.1.15.2.11.1.2 unsigned32 read-only
This attribute describes the total formatted disk size (in bytes) of the disk.
                     mscFsDiskFreeSpace 1.3.6.1.4.1.562.36.2.1.15.2.11.1.3 unsigned32 read-only
freeSpace This attribute indicates the available free disk space(in bytes) on the disk. Free space is reduced by bad blocks (if any). If there are different numbers of bad blocks on the disks in a dual-disk system, the reported free space will differ on the two disks. Moreover, due to the DOS file system internal representation of directories and files, adding and deleting files may fragment the disks differently resulting in some disk space wasted. A small discrepancy (less than 1% of the disk size) in the disks free space is considered as normal.
                     mscFsDiskBadBlocksPercentage 1.3.6.1.4.1.562.36.2.1.15.2.11.1.4 gauge32 read-only
This attribute records the percentage of the disk space lost because of defects. If this percentage is high, it is recommended to change the disk.
                     mscFsDiskUnformattedCapacity 1.3.6.1.4.1.562.36.2.1.15.2.11.1.5 unsigned32 read-only
unformattedCapacity This attribute indicates the physical disk size (in bytes). The physical disk size may be different from the formatted disk size if there are bad blocks or the disk has been formatted to a smaller disk size for backward compatibility with older releases.
       mscFsStateTable 1.3.6.1.4.1.562.36.2.1.15.10 no-access
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
             mscFsStateEntry 1.3.6.1.4.1.562.36.2.1.15.10.1 no-access
An entry in the mscFsStateTable.
                 mscFsAdminState 1.3.6.1.4.1.562.36.2.1.15.10.1.1 integer read-only
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. Enumeration: 'locked': 0, 'shuttingDown': 2, 'unlocked': 1.
                 mscFsOperationalState 1.3.6.1.4.1.562.36.2.1.15.10.1.2 integer read-only
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. Enumeration: 'disabled': 0, 'enabled': 1.
                 mscFsUsageState 1.3.6.1.4.1.562.36.2.1.15.10.1.3 integer read-only
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. Enumeration: 'active': 1, 'idle': 0, 'busy': 2.
       mscFsOperTable 1.3.6.1.4.1.562.36.2.1.15.11 no-access
This group contains the filesystem operational data.
             mscFsOperEntry 1.3.6.1.4.1.562.36.2.1.15.11.1 no-access
An entry in the mscFsOperTable.
                 mscFsVolumeName 1.3.6.1.4.1.562.36.2.1.15.11.1.1 asciistring read-only
This attribute describes the volume name of the filesystem. This is the active disk volume name.
                 mscFsActiveDisk 1.3.6.1.4.1.562.36.2.1.15.11.1.2 rowpointer read-only
The activeDisk attribute value is the Disk component instance value of the active disk. This is also the card number of the active control processor.
                 mscFsSyncStatus 1.3.6.1.4.1.562.36.2.1.15.11.1.3 integer read-only
The synchronization status value indicates whether the file system is synchronized or not. Enumeration: 'unSynchronized': 1, 'synchronizing': 2, 'synchronized': 0.
                 mscFsSyncProgress 1.3.6.1.4.1.562.36.2.1.15.11.1.4 gauge32 read-only
The synchronization progress value indicates the percentage of the standby disk already synchronized with the active disk. This value is equal to 100 if the two disks are synchronized or 0 if they are out of synchronization.
                 mscFsCapacity 1.3.6.1.4.1.562.36.2.1.15.11.1.5 unsigned32 read-only
The Capacity attribute value is the total size of the filesystem (in bytes). This value is equal to the smallest disk size in a synchronized filesystem, otherwise it is the capacity of the active disk.
                 mscFsFreeSpace 1.3.6.1.4.1.562.36.2.1.15.11.1.6 unsigned32 read-only
This attribute describes the free disk space (in bytes) currently available in the filesystem. It is equal to the smallest free disk space size of the active and standby disks in a synchronized filesystem. When the filesystem is unsynchronized it is the free disk space of the active disk.
                 mscFsUsage 1.3.6.1.4.1.562.36.2.1.15.11.1.7 gauge32 read-only
This attribute describes the percentage of the free space available on the filesystem.
 fileSystemMIB 1.3.6.1.4.1.562.36.2.2.16
       fileSystemGroup 1.3.6.1.4.1.562.36.2.2.16.1
           fileSystemGroupCA 1.3.6.1.4.1.562.36.2.2.16.1.1
               fileSystemGroupCA02 1.3.6.1.4.1.562.36.2.2.16.1.1.3
                   fileSystemGroupCA02A 1.3.6.1.4.1.562.36.2.2.16.1.1.3.2
       fileSystemCapabilities 1.3.6.1.4.1.562.36.2.2.16.3
           fileSystemCapabilitiesCA 1.3.6.1.4.1.562.36.2.2.16.3.1
               fileSystemCapabilitiesCA02 1.3.6.1.4.1.562.36.2.2.16.3.1.3
                   fileSystemCapabilitiesCA02A 1.3.6.1.4.1.562.36.2.2.16.3.1.3.2