Nortel-Magellan-Passport-ModAtmQosMIB: View SNMP OID List / Download MIB

VENDOR: NORTHERN TELECOM


 Home MIB: Nortel-Magellan-Passport-ModAtmQosMIB
Download as:   
SNMPv2-CONF, Nortel-Magellan-Passport-ModCommonMIB, SNMPv2-SMI, Nortel-Magellan-Passport-StandardTextualConventionsMIB, Nortel-Magellan-Passport-UsefulDefinitionsMIB, Nortel-Magellan-Passport-TextualConventionsMIB, SNMPv2-TC, Nortel-Magellan-Passport-ShelfMIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
           modFrsAtmNet 1.3.6.1.4.1.562.2.4.1.16.3.2
               modFrsAtmNetRowStatusTable 1.3.6.1.4.1.562.2.4.1.16.3.2.1 no-access
This entry controls the addition and deletion of modFrsAtmNet components.
                   modFrsAtmNetRowStatusEntry 1.3.6.1.4.1.562.2.4.1.16.3.2.1.1 no-access
A single entry in the table represents a single modFrsAtmNet component.
                       modFrsAtmNetRowStatus 1.3.6.1.4.1.562.2.4.1.16.3.2.1.1.1 rowstatus read-only
This variable is used as the basis for SNMP naming of modFrsAtmNet components. These components cannot be added nor deleted.
                       modFrsAtmNetComponentName 1.3.6.1.4.1.562.2.4.1.16.3.2.1.1.2 displaystring read-only
This variable provides the component's string name for use with the ASCII Console Interface
                       modFrsAtmNetStorageType 1.3.6.1.4.1.562.2.4.1.16.3.2.1.1.4 storagetype read-only
This variable represents the storage type value for the modFrsAtmNet tables.
                       modFrsAtmNetIndex 1.3.6.1.4.1.562.2.4.1.16.3.2.1.1.10 nonreplicated no-access
This variable represents the index for the modFrsAtmNet tables.
               modFrsAtmNetTpm 1.3.6.1.4.1.562.2.4.1.16.3.2.2
                   modFrsAtmNetTpmRowStatusTable 1.3.6.1.4.1.562.2.4.1.16.3.2.2.1 no-access
This entry controls the addition and deletion of modFrsAtmNetTpm components.
                       modFrsAtmNetTpmRowStatusEntry 1.3.6.1.4.1.562.2.4.1.16.3.2.2.1.1 no-access
A single entry in the table represents a single modFrsAtmNetTpm component.
                           modFrsAtmNetTpmRowStatus 1.3.6.1.4.1.562.2.4.1.16.3.2.2.1.1.1 rowstatus read-write
This variable is used as the basis for SNMP naming of modFrsAtmNetTpm components. These components can be added.
                           modFrsAtmNetTpmComponentName 1.3.6.1.4.1.562.2.4.1.16.3.2.2.1.1.2 displaystring read-only
This variable provides the component's string name for use with the ASCII Console Interface
                           modFrsAtmNetTpmStorageType 1.3.6.1.4.1.562.2.4.1.16.3.2.2.1.1.4 storagetype read-only
This variable represents the storage type value for the modFrsAtmNetTpm tables.
                           modFrsAtmNetTpmIndex 1.3.6.1.4.1.562.2.4.1.16.3.2.2.1.1.10 integer32 no-access
This variable represents the index for the modFrsAtmNetTpm tables.
                   modFrsAtmNetTpmProvTable 1.3.6.1.4.1.562.2.4.1.16.3.2.2.2 no-access
This group specifies the mapping from Frame Relay parameters to ATM parameters for a Frame Relay using the defined transfer priority.
                       modFrsAtmNetTpmProvEntry 1.3.6.1.4.1.562.2.4.1.16.3.2.2.2.1 no-access
An entry in the modFrsAtmNetTpmProvTable.
                           modFrsAtmNetTpmEmissionPriority 1.3.6.1.4.1.562.2.4.1.16.3.2.2.2.1.1 unsigned32 read-write
This attribute specifies the egress emission priority at the FR to ATM interface. A value of 3 specifies the highest priority, whereas a value of 0 specifies the lowest priority.
                           modFrsAtmNetTpmAtmServiceCategory 1.3.6.1.4.1.562.2.4.1.16.3.2.2.2.1.2 integer read-write
This attribute specifies the ATM class of service value to be used on a transport connection. Enumeration: 'cbr': 1, 'rtVbr': 2, 'nrtVbr': 3, 'ubr': 0.
                           modFrsAtmNetTpmAvgFrameSize 1.3.6.1.4.1.562.2.4.1.16.3.2.2.2.1.3 unsigned32 read-write
This attribute specifies the average frame size that is used in the traffic parameter conversion policy calculations for this transfer priority to determine the overhead factor for FR to ATM interworking. The overhead factor affects the granularity of the bandwidth requirements. The values should be identical across the network. Otherwise, there may result in bandwidth conversion inconsistencies.
                           modFrsAtmNetTpmTrafficParmConversionPolicy 1.3.6.1.4.1.562.2.4.1.16.3.2.2.2.1.4 integer read-write
This attribute specifies the traffic parameter conversion policy to use for this transfer priority to specify the equivalent bandwidth rate at the FrAtm interface. Policy 3 characterizes the traffic in the following way: - ATM traffic descriptor type 6 is selected - PCR0+1 is based on the AR - SCR0+1 is based on the CIR and EIR - MBS0+1 is based on Bc,Be,CIR,EIR and AR - Takes into account that the instananeous rate of the frame relay stream can burst above CIR and up tp the AR. Policy 4 characterizes the traffic in the following way: - ATM traffic descriptor type 7 or 8 is selected. Type 7 is chosen when non-conforming cells are to be discarded and type 8 when non-conforming cells are tagged by UPC traffic policer. - PCR0+1 is based on the AR - SCR0 is based on the CIR - MBS0 is based on Bc,CIR and AR - There is no direct characterization of EIR. The allowed EIR can be derived using the difference between the AR and CIR. Policy 5 characterizes the traffic in the following way: - ATM traffic descriptor type 7 or 8 is selected . Type 7 is chosen when non-conforming cells are to be discarded and type 8 when non-conforming cells are tagged by UPC traffic policer - PCR0+1 is based on CIR and EIR - SCR0 is based on the CIR - MBS0 is based on the Bc,CIR and AR - The maximum PCR is no longer based on AR but based on the CIR and EIR. Policy 6 characterizes the traffic in the following way: - ATM traffic descriptor type 3 is selected - PCR0+1 is based only on CIR. Enumeration: 'n3': 3, 'n4': 4, 'n5': 5, 'n6': 6.
                           modFrsAtmNetTpmAssignedBandwidthPool 1.3.6.1.4.1.562.2.4.1.16.3.2.2.2.1.5 integer read-write
This attribute specifies the bandwidth pool which is used to support this transfer priority. The bandwidth pool is defined in the frAtm Ca component. Enumeration: 'n12': 12, 'n13': 13, 'n10': 10, 'n11': 11, 'n14': 14, 'n15': 15, 'n8': 8, 'n9': 9, 'n0': 0, 'n1': 1, 'n2': 2, 'n3': 3, 'n4': 4, 'n5': 5, 'n6': 6, 'n7': 7.
               modFrsAtmNetProvTable 1.3.6.1.4.1.562.2.4.1.16.3.2.10 no-access
This group contains information related to the Frame Relay to ATM interworking.
                     modFrsAtmNetProvEntry 1.3.6.1.4.1.562.2.4.1.16.3.2.10.1 no-access
An entry in the modFrsAtmNetProvTable.
                         modFrsAtmNetRetryTimerPeriod 1.3.6.1.4.1.562.2.4.1.16.3.2.10.1.1 unsigned32 read-write
This attribute specifies the module wide retry timer interval for failed SPVC calls using Frame Relay to ATM Networking. Changes to this attribute will take effect on subsequent call setups.
 modAtmQosMIB 1.3.6.1.4.1.562.2.4.2.75
       modAtmQosGroup 1.3.6.1.4.1.562.2.4.2.75.1
           modAtmQosGroupBE 1.3.6.1.4.1.562.2.4.2.75.1.5
               modAtmQosGroupBE01 1.3.6.1.4.1.562.2.4.2.75.1.5.2
                   modAtmQosGroupBE01A 1.3.6.1.4.1.562.2.4.2.75.1.5.2.2
       modAtmQosCapabilities 1.3.6.1.4.1.562.2.4.2.75.3
           modAtmQosCapabilitiesBE 1.3.6.1.4.1.562.2.4.2.75.3.5
               modAtmQosCapabilitiesBE01 1.3.6.1.4.1.562.2.4.2.75.3.5.2
                   modAtmQosCapabilitiesBE01A 1.3.6.1.4.1.562.2.4.2.75.3.5.2.2