NTWS-CLIENT-SESSION-MIB: View SNMP OID List / Download MIB

VENDOR: SYNOPTICS


 Home MIB: NTWS-CLIENT-SESSION-MIB
Download as:   
SNMPv2-CONF, NTWS-CLIENT-SESSION-TC, NTWS-BASIC-TC, NTWS-ROOT-MIB, SNMPv2-SMI, NTWS-AP-TC, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ntwsClientSessionMib 1.3.6.1.4.1.45.6.1.4.4
Client Session MIB. AP = Access Point; AC = Access Controller (wireless switch), the device that runs a SNMP Agent implementing this MIB. Copyright 2008 Nortel Networks. All rights reserved. This Nortel Networks SNMP Management Information Base Specification (Specification) embodies Nortel Networks' confidential and proprietary intellectual property. This Specification is supplied 'AS IS' and Nortel Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
     ntwsClientSessionObjects 1.3.6.1.4.1.45.6.1.4.4.1
         ntwsClientSessionDataObjects 1.3.6.1.4.1.45.6.1.4.4.1.1
             ntwsClSessClientSessionTable 1.3.6.1.4.1.45.6.1.4.4.1.1.1 no-access
Client Session Table.
                 ntwsClSessClientSessionEntry 1.3.6.1.4.1.45.6.1.4.4.1.1.1.1 no-access
Information about a particular client session.
                     ntwsClSessClientSessMacAddress 1.3.6.1.4.1.45.6.1.4.4.1.1.1.1.1 macaddress no-access
Client MAC address.
                     ntwsClSessClientSessSessionId 1.3.6.1.4.1.45.6.1.4.4.1.1.1.1.2 displaystring read-only
Session ID is a string long enough to be sure we can make it unique over a long time.
                     ntwsClSessClientSessUsername 1.3.6.1.4.1.45.6.1.4.4.1.1.1.1.3 displaystring read-only
Client user name.
                     ntwsClSessClientSessIpAddress 1.3.6.1.4.1.45.6.1.4.4.1.1.1.1.4 ipaddress read-only
Client IP address. If the client has no IP address, the value will be 0.0.0.0.
                     ntwsClSessClientSessEncryptionType 1.3.6.1.4.1.45.6.1.4.4.1.1.1.1.5 ntwsencryptiontype read-only
Encryption type.
                     ntwsClSessClientSessVlan 1.3.6.1.4.1.45.6.1.4.4.1.1.1.1.6 displaystring read-only
The name of the client VLAN.
                     ntwsClSessClientSessApSerialNum 1.3.6.1.4.1.45.6.1.4.4.1.1.1.1.7 ntwsapserialnum read-only
Serial Number of the AP this client is connected to. It is a zero length string when wired access is used.
                     ntwsClSessClientSessRadioNum 1.3.6.1.4.1.45.6.1.4.4.1.1.1.1.8 ntwsradionum read-only
Number of the Radio that provides service to this client. It is 'not-applicable' when wired access is used.
                     ntwsClSessClientSessAccessType 1.3.6.1.4.1.45.6.1.4.4.1.1.1.1.9 ntwsaccesstype read-only
Access type this client uses (via AP, DAP or wired). Obsoleted by ntwsClSessClientSessAccessMode.
                     ntwsClSessClientSessAuthMethod 1.3.6.1.4.1.45.6.1.4.4.1.1.1.1.10 ntwsauthmethod read-only
Authentication Method. Deprecated, use ntwsClSessClientSessDot1xAuthMethod instead.
                     ntwsClSessClientSessAuthServer 1.3.6.1.4.1.45.6.1.4.4.1.1.1.1.11 ipaddress read-only
Authentication Server's IP Address. If the client is authenticated via the local DB, or not authenticated, its value will be the system IP.
                     ntwsClSessClientSessPortOrNum 1.3.6.1.4.1.45.6.1.4.4.1.1.1.1.12 unsigned32 read-only
Port number. Obsoleted by ntwsClSessClientSessApNum.
                     ntwsClSessClientSessVlanTag 1.3.6.1.4.1.45.6.1.4.4.1.1.1.1.13 unsigned32 read-only
VLAN tag.
                     ntwsClSessClientSessTimeStamp 1.3.6.1.4.1.45.6.1.4.4.1.1.1.1.14 timestamp read-only
Session start time stamp.
                     ntwsClSessClientSessSsid 1.3.6.1.4.1.45.6.1.4.4.1.1.1.1.15 displaystring read-only
SSID.
                     ntwsClSessClientSessState 1.3.6.1.4.1.45.6.1.4.4.1.1.1.1.16 ntwssessstate read-only
Session state. Deprecated, use ntwsClSessClientSessSessionState instead.
                     ntwsClSessClientSessLoginType 1.3.6.1.4.1.45.6.1.4.4.1.1.1.1.17 ntwsuseraccesstype read-only
Login type (mac, web, dot1x or last-resort).
                     ntwsClSessClientSessDot1xAuthMethod 1.3.6.1.4.1.45.6.1.4.4.1.1.1.1.18 ntwsclientauthenprotocoltype read-only
Dot1x Authentication Method.
                     ntwsClSessClientSessSessionState 1.3.6.1.4.1.45.6.1.4.4.1.1.1.1.19 ntwsclientsessionstate read-only
Session non-intermediate state.
                     ntwsClSessClientSessAccessMode 1.3.6.1.4.1.45.6.1.4.4.1.1.1.1.20 ntwsclientaccessmode read-only
Access mode (type) this client uses (via AP or wired). Obsoletes ntwsClSessClientSessAccessType since in 6.0 directly attached APs and DAPs were unified.
                     ntwsClSessClientSessApNum 1.3.6.1.4.1.45.6.1.4.4.1.1.1.1.21 ntwsapnum read-only
The AP providing wireless service to this client is identified by its administratively assigned AP Number, unique on same AC (switch), regardless of how APs are attached to the AC. Meaningful when ntwsClSessClientSessAccessMode = 'ap'. Obsoletes ntwsClSessClientSessPortOrNum since in 6.0 directly attached APs and DAPs were unified.
                     ntwsClSessClientSessPhysPortNum 1.3.6.1.4.1.45.6.1.4.4.1.1.1.1.22 ntwsphysportnumberorzero read-only
The physical port used by this wired-auth client is identified by its port number on the AC (switch). Zero means the port is unknown or not applicable (for example, when ntwsClSessClientSessAccessMode = 'ap'). Meaningful when ntwsClSessClientSessAccessMode = 'wired'.
             ntwsClSessRoamingHistoryTable 1.3.6.1.4.1.45.6.1.4.4.1.1.2 no-access
Roaming History Table. Expansion of Client Session Table.
                 ntwsClSessRoamingHistoryEntry 1.3.6.1.4.1.45.6.1.4.4.1.1.2.1 no-access
Roaming History Entry.
                     ntwsClSessRoamHistMacAddress 1.3.6.1.4.1.45.6.1.4.4.1.1.2.1.1 macaddress no-access
Client MAC address.
                     ntwsClSessRoamHistIndex 1.3.6.1.4.1.45.6.1.4.4.1.1.2.1.2 unsigned32 no-access
Entry index.
                     ntwsClSessRoamHistApSerialNum 1.3.6.1.4.1.45.6.1.4.4.1.1.2.1.3 ntwsapserialnum read-only
Serial Number of the AP this client was connected to.
                     ntwsClSessRoamHistRadioNum 1.3.6.1.4.1.45.6.1.4.4.1.1.2.1.4 ntwsradionum read-only
Number of the Radio that provided service to this client.
                     ntwsClSessRoamHistAccessType 1.3.6.1.4.1.45.6.1.4.4.1.1.2.1.5 ntwsaccesstype read-only
Access type used by this client (via AP, DAP or wired). Obsoleted by ntwsClSessRoamHistAccessMode.
                     ntwsClSessRoamHistApNumOrPort 1.3.6.1.4.1.45.6.1.4.4.1.1.2.1.6 unsigned32 read-only
AP port number, DAP number, or Port number for wired access. Obsoleted by ntwsClSessRoamHistApNum.
                     ntwsClSessRoamHistIpAddress 1.3.6.1.4.1.45.6.1.4.4.1.1.2.1.7 ipaddress read-only
IP address of the AC (wireless switch) the client or AP was connected to.
                     ntwsClSessRoamHistTimeStamp 1.3.6.1.4.1.45.6.1.4.4.1.1.2.1.8 timestamp read-only
The difference between the time the session was created on the roamed-to switch and the time the last switch, the one where the user is at currently, started. The timestamp unit is in hundredths of seconds.
                     ntwsClSessRoamHistAccessMode 1.3.6.1.4.1.45.6.1.4.4.1.1.2.1.9 ntwsclientaccessmode read-only
Access mode (type) used by this client (via AP or wired). Obsoletes ntwsClSessRoamHistAccessType since in 6.0 directly attached APs and DAPs were unified.
                     ntwsClSessRoamHistApNum 1.3.6.1.4.1.45.6.1.4.4.1.1.2.1.10 ntwsapnum read-only
The administratively assigned AP Number, unique on same AC (switch), regardless of how APs are attached to the AC. Obsoletes ntwsClSessRoamHistApNumOrPort since in 6.0 directly attached APs and DAPs were unified.
                     ntwsClSessRoamHistPhysPortNum 1.3.6.1.4.1.45.6.1.4.4.1.1.2.1.11 ntwsphysportnumberorzero read-only
The physical port used by this wired-auth client is identified by its port number on the AC (switch). Zero means the port is unknown or not applicable (for example, when ntwsClSessRoamHistAccessMode = 'ap'). Meaningful when ntwsClSessRoamHistAccessMode = 'wired'.
             ntwsClSessClientSessionStatisticsTable 1.3.6.1.4.1.45.6.1.4.4.1.1.3 no-access
Client Session Statistics Table.
                 ntwsClSessClientSessionStatisticsEntry 1.3.6.1.4.1.45.6.1.4.4.1.1.3.1 no-access
Client Session Statistics Table Entry.
                     ntwsClSessClientSessStatsMacAddress 1.3.6.1.4.1.45.6.1.4.4.1.1.3.1.1 macaddress no-access
Client MAC address.
                     ntwsClSessClientSessStatsUniPktIn 1.3.6.1.4.1.45.6.1.4.4.1.1.3.1.2 counter64 read-only
Unicast packets in.
                     ntwsClSessClientSessStatsUniOctetIn 1.3.6.1.4.1.45.6.1.4.4.1.1.3.1.3 counter64 read-only
Unicast octets in.
                     ntwsClSessClientSessStatsUniPktOut 1.3.6.1.4.1.45.6.1.4.4.1.1.3.1.4 counter64 read-only
Unicast packets out.
                     ntwsClSessClientSessStatsUniOctetOut 1.3.6.1.4.1.45.6.1.4.4.1.1.3.1.5 counter64 read-only
Unicast octets out.
                     ntwsClSessClientSessStatsMultiPktIn 1.3.6.1.4.1.45.6.1.4.4.1.1.3.1.6 counter64 read-only
Multicast packets in.
                     ntwsClSessClientSessStatsMultiOctetIn 1.3.6.1.4.1.45.6.1.4.4.1.1.3.1.7 counter64 read-only
Multicast octets in.
                     ntwsClSessClientSessStatsEncErrPkt 1.3.6.1.4.1.45.6.1.4.4.1.1.3.1.8 counter64 read-only
Number of packets with encryption errors.
                     ntwsClSessClientSessStatsEncErrOctet 1.3.6.1.4.1.45.6.1.4.4.1.1.3.1.9 counter64 read-only
Number of octets with encryption errors.
                     ntwsClSessClientSessStatsLastRate 1.3.6.1.4.1.45.6.1.4.4.1.1.3.1.10 ntwsradiorate read-only
Last packet data rate.
                     ntwsClSessClientSessStatsLastRssi 1.3.6.1.4.1.45.6.1.4.4.1.1.3.1.11 ntwsrssi read-only
RSSI (Received Signal Strength Indicator) for last packet, in decibels referred to 1 milliwatt (dBm). A higher value indicates a stronger signal.
                     ntwsClSessClientSessStatsLastSNR 1.3.6.1.4.1.45.6.1.4.4.1.1.3.1.12 integer32 read-only
Last packet data Signal to Noise Ratio.
             ntwsClSessTotalSessions 1.3.6.1.4.1.45.6.1.4.4.1.1.4 unsigned32 read-only
Total number of sessions.
         ntwsClientSessionConformance 1.3.6.1.4.1.45.6.1.4.4.1.2
             ntwsClientSessionCompliances 1.3.6.1.4.1.45.6.1.4.4.1.2.1
                 ntwsClientSessionCompliance 1.3.6.1.4.1.45.6.1.4.4.1.2.1.1
The compliance statement for devices that implement the Client Session MIB. This compliance statement was for releases 4.1 and 4.2 of AC (wireless switch) software. This compliance statement is replaced by ntwsClientSessionComplianceRev2.
                 ntwsClientSessionComplianceRev2 1.3.6.1.4.1.45.6.1.4.4.1.2.1.2
The compliance statement for devices that implement the Client Session MIB. This compliance statement was for releases 5.0 and 6.0 of AC (wireless switch) software. This compliance statement is replaced by ntwsClientSessionComplianceRev3.
                 ntwsClientSessionComplianceRev3 1.3.6.1.4.1.45.6.1.4.4.1.2.1.3
The compliance statement for devices that implement the Client Session MIB. This compliance statement is for releases 6.2 and greater of AC (wireless switch) software.
             ntwsClientSessionGroups 1.3.6.1.4.1.45.6.1.4.4.1.2.2
                 ntwsClientSessionCommonGroup 1.3.6.1.4.1.45.6.1.4.4.1.2.2.1
Mandatory group of objects implemented to provide Client Session info in releases 4.1 and 4.2 of AC (wireless switch) software. Replaced by ntwsClientSessClientSessionTableGroup, ntwsClientSessRoamingHistoryTableGroup, ntwsClientSessClientSessionStatisticsTableGroup.
                 ntwsClientSessScalarsGroup 1.3.6.1.4.1.45.6.1.4.4.1.2.2.2
Group of scalar objects implemented to provide general Client info in releases 5.0 and greater.
                 ntwsClientSessClientSessionTableGroup 1.3.6.1.4.1.45.6.1.4.4.1.2.2.3
Group of columnar objects implemented to provide Client Session info in releases 5.0 and 6.0. Replaced by ntwsClientSessClientSessionTableGroupRev2.
                 ntwsClientSessRoamingHistoryTableGroup 1.3.6.1.4.1.45.6.1.4.4.1.2.2.4
Group of columnar objects implemented to provide roaming history per Client Session in releases 5.0 and 6.0. Replaced by ntwsClientSessRoamingHistoryTableGroupRev2.
                 ntwsClientSessClientSessionStatisticsTableGroup 1.3.6.1.4.1.45.6.1.4.4.1.2.2.5
Group of columnar objects implemented to provide statistics per Client Session in releases 5.0 and greater.
                 ntwsClientSessClientSessionTableGroupRev2 1.3.6.1.4.1.45.6.1.4.4.1.2.2.6
Group of columnar objects implemented to provide Client Session info in releases 6.2 and greater.
                 ntwsClientSessRoamingHistoryTableGroupRev2 1.3.6.1.4.1.45.6.1.4.4.1.2.2.7
Group of columnar objects implemented to provide roaming history per Client Session in releases 6.2 and greater.