NTWS-AP-IF-MIB: View SNMP OID List / Download MIB

VENDOR: SYNOPTICS


 Home MIB: NTWS-AP-IF-MIB
Download as:   
SNMPv2-CONF, NTWS-ROOT-MIB, SNMPv2-SMI, IANAifType-MIB, NTWS-AP-TC, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ntwsApIfMib 1.3.6.1.4.1.45.6.1.4.16
AP network Interface objects for Nortel Networks wireless switches. AP = Access Point; AC = Access Controller (wireless switch), the device that runs a SNMP Agent implementing this MIB. Copyright 2009 Nortel Networks. All rights reserved. This Nortel Networks SNMP Management Information Base Specification (Specification) embodies Nortel Networks' confidential and proprietary intellectual property. This Specification is supplied 'AS IS' and Nortel Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
       ntwsApIfMibObjects 1.3.6.1.4.1.45.6.1.4.16.1
           ntwsApIfTable 1.3.6.1.4.1.45.6.1.4.16.1.1 no-access
A table describing the network interfaces on all the APs currently present and managed by this AC (APs in ''ALIVE'' state).
               ntwsApIfEntry 1.3.6.1.4.1.45.6.1.4.16.1.1.1 no-access
Information about a particular network interface on an AP attached to the AC.
                   ntwsApIfApSerialNum 1.3.6.1.4.1.45.6.1.4.16.1.1.1.1 ntwsapserialnum no-access
The Serial Number of the AP containing this network interface.
                   ntwsApIfIndex 1.3.6.1.4.1.45.6.1.4.16.1.1.1.2 ntwsapinterfaceindex no-access
A unique value, greater than zero, for each AP network interface.
                   ntwsApIfName 1.3.6.1.4.1.45.6.1.4.16.1.1.1.3 displaystring read-only
The textual name of the interface.
                   ntwsApIfType 1.3.6.1.4.1.45.6.1.4.16.1.1.1.4 ianaiftype read-only
The type of AP network interfaces.
                   ntwsApIfMtu 1.3.6.1.4.1.45.6.1.4.16.1.1.1.5 unsigned32 read-only
The size of the largest packet which can be sent/received on the interface, specified in octets.
                   ntwsApIfHighSpeed 1.3.6.1.4.1.45.6.1.4.16.1.1.1.6 gauge32 read-only
The nominal bandwidth of AP network interfaces in units of 1,000,000 bits per second.
                   ntwsApIfMac 1.3.6.1.4.1.45.6.1.4.16.1.1.1.7 macaddress read-only
The MAC address of this network interface.
       ntwsApIfConformance 1.3.6.1.4.1.45.6.1.4.16.2
           ntwsApIfCompliances 1.3.6.1.4.1.45.6.1.4.16.2.1
               ntwsApIfCompliance 1.3.6.1.4.1.45.6.1.4.16.2.1.1
The compliance statement for devices that implement AP If MIB. This compliance statement is for releases 7.1 and greater of AC (wireless switch) software.
           ntwsApIfGroups 1.3.6.1.4.1.45.6.1.4.16.2.2
               ntwsApIfBasicGroup 1.3.6.1.4.1.45.6.1.4.16.2.2.1
Group of columnar objects implemented to provide basic Interface info in releases 7.1 and greater.