NTRON714FX6-MIB: View SNMP OID List / Download MIB

VENDOR: RED LION CONTROLS (N-TRON)


 Home MIB: NTRON714FX6-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ntron 1.3.6.1.4.1.28381
             ntron7xx 1.3.6.1.4.1.28381.700
                     ntron714fx6 1.3.6.1.4.1.28381.700.7
Added ntron and series specific identifiers, fixed port Sequence and changed TRAP-TYPE to NOTIFICATION-TYPE
                         ntronSysGroup 1.3.6.1.4.1.28381.700.7.1
                             ntronSysReset 1.3.6.1.4.1.28381.700.7.1.1 integer read-write
Setting this object to 'switchReset' will cause the switch to perform a hardware reset within approximately 4-6 seconds.Setting this object to 'switchNoReset ' will have no effect.The value 'switchNoReset' will be returned whenever this object is retrieved . Enumeration: 'switchReset': 2, 'switchNoReset': 1.
                             ntronSwVersion 1.3.6.1.4.1.28381.700.7.1.2 displaystring read-only
This object identifies the Version Number of Current Release.
                             ntronBuildDateAndTime 1.3.6.1.4.1.28381.700.7.1.3 displaystring read-only
This object will hold the image build date and time.
                             ntronTotalRam 1.3.6.1.4.1.28381.700.7.1.4 integer32 read-only
This object will give the total RAM available in the system.
                             ntronTotalFlash 1.3.6.1.4.1.28381.700.7.1.5 integer32 read-only
This object will give the total Flash available in system.
                             ntronEthernetPortCount 1.3.6.1.4.1.28381.700.7.1.6 integer32 read-only
This object will return the number of 10/100 Mbps Ethernet ports on the switch.
                             ntronCurrentIpAddress 1.3.6.1.4.1.28381.700.7.1.7 ipaddress read-only
The Current IP address is the one which is currently used and is obtained dynamically through protocol interaction.( DHCP ) This address is NULL if the Address is Statically configured.
                             ntronConfiguredIpAddress 1.3.6.1.4.1.28381.700.7.1.8 ipaddress read-write
The Configured IP address of the device. This is the address configured through Network or cli.
                             ntronConfiguredSubnetMask 1.3.6.1.4.1.28381.700.7.1.9 ipaddress read-write
The Configured Subnet Mask of the device.
                             ntronConfiguredGateway 1.3.6.1.4.1.28381.700.7.1.10 ipaddress read-write
The Configured Gateway/Router address of the device
                             ntronUpdateConfiguredIpAddr 1.3.6.1.4.1.28381.700.7.1.11 integer read-write
By setting this object to enable will update the ipaddress, subnetmask and the router ip address. Enumeration: 'enable': 2, 'disable': 1.
                             ntronIPAddressStatus 1.3.6.1.4.1.28381.700.7.1.12 integer read-only
The IP Address can be obtained/configured by any of the above different ways. This object specifies how IP address currently on the switch , was configured/obtained. Enumeration: 'fromCli': 1, 'fromDhcp': 2.
                             ntronTotalNoOfPorts 1.3.6.1.4.1.28381.700.7.1.13 integer32 read-only
This object will give the total number of ports available in the device .
                             ntronMacAddress 1.3.6.1.4.1.28381.700.7.1.14 displaystring read-only
The mac address of the system .
                             ntronContactStatus 1.3.6.1.4.1.28381.700.7.1.15 integer read-only
The status of the switch contact . Enumeration: 'open': 1, 'closed': 2, 'unsupported': 3.
                             ntronPowerFault 1.3.6.1.4.1.28381.700.7.1.16 integer read-only
The power fault status . Enumeration: 'faultNone': 1, 'faultPower2': 3, 'faultPower1': 2.
                             ntronModelString 1.3.6.1.4.1.28381.700.7.1.17 displaystring read-only
This object will hold the switch model string.
                             ntronBlVersion 1.3.6.1.4.1.28381.700.7.1.18 displaystring read-only
This object identifies the Version Number of Current Bootloader Release.
                         ntronNViewGroup 1.3.6.1.4.1.28381.700.7.2
                             ntronNViewState 1.3.6.1.4.1.28381.700.7.2.1 integer read-write
Global status of NView broadcasts. Enumeration: 'enable': 2, 'disable': 1.
                             ntronNViewInterval 1.3.6.1.4.1.28381.700.7.2.2 integer32 read-write
Global interval between NView broadcasts.
                             ntronNViewTable 1.3.6.1.4.1.28381.700.7.2.3 no-access
The table that contains the information about the per port NView status.
                                 ntronNViewEntry 1.3.6.1.4.1.28381.700.7.2.3.1 no-access
An entry in the ntronNViewTable.
                                     ntronNViewPortNumber 1.3.6.1.4.1.28381.700.7.2.3.1.1 integer32 read-only
The unique identifier to identify the entry in the ntronNViewTable.
                                     ntronNViewMulticast 1.3.6.1.4.1.28381.700.7.2.3.1.2 integer read-write
The status of a port for transmitting NView packets. Enumeration: 'enable': 2, 'disable': 1.
                                     ntronNViewStats 1.3.6.1.4.1.28381.700.7.2.3.1.3 integer read-write
The status of a port for having its stats sent as NView packets. Enumeration: 'enable': 2, 'disable': 1.
                         ntronTFTPGroup 1.3.6.1.4.1.28381.700.7.3
                             ntronTFTPServerIpAddress 1.3.6.1.4.1.28381.700.7.3.1 ipaddress read-write
The ipaddress of the Tftp server.
                             ntronTFTPRemoteFileName 1.3.6.1.4.1.28381.700.7.3.2 displaystring read-write
The field gives the file name to be downloaded.
                             ntronTFTPAction 1.3.6.1.4.1.28381.700.7.3.3 integer read-write
Setting this object to the value mentioned above will cause the specific function to be called. When performing config actions either the config flags below or the same defaults as on the web will be used if not set as below. Enumeration: 'downloadImage': 2, 'configDownload': 4, 'configUpload': 3, 'downloadBootImage': 6, 'noAction': 1.
                             ntronTFTPConfigFlags 1.3.6.1.4.1.28381.700.7.3.4 integer read-write
If not manually set by the user the web default values will be used in the above action. Flags are reset to use the default values when ntronTFTPAction is complete Enumeration: 'keepCurrentIp': 32, 'snmp': 2, 'macSec': 8, 'macSecManualOnly': 16, 'dhcp': 4, 'main': 1.
                         ntronPortMirroringGroup 1.3.6.1.4.1.28381.700.7.7
                             ntronMirroringState 1.3.6.1.4.1.28381.700.7.7.1 integer read-write
This Field gives the current state of the mirror. Setting this object to an value enable the mirror .If disabled, port operation works normally. No Traffic gets routed from MirroringSourcePort to Destination Mirrored Port. Enumeration: 'enable': 1, 'disable': 2.
                             ntronMirroringDestinationPort 1.3.6.1.4.1.28381.700.7.7.2 integer32 read-write
This is the Destination port number for which there is another mirror port.If the ntronMirroringState is Enabled then the mirror port gets routed with all the packets going in and out of Destination port. This arrangement is to put an RMON Probe on mirrored port to Probe the traffic on the Destination port. One of the port is dedicated to this so that for any port as destination port, this dedicated port can be a mirrored port. This object will return a '0' if the MirrorState is not enabled.
                             ntronPortMirroringTable 1.3.6.1.4.1.28381.700.7.7.3 no-access
The table which contains the mirroring information of the ports .
                                 ntronPortMirroringEntry 1.3.6.1.4.1.28381.700.7.7.3.1 no-access
An entry in the ntronPortMirroringTable.
                                     ntronPortMirroringNo 1.3.6.1.4.1.28381.700.7.7.3.1.1 integer32 read-only
This object identifies the port of the switch.
                                     ntronPortMirroringTx 1.3.6.1.4.1.28381.700.7.7.3.1.2 integer32 read-write
This object shows the mirror Tx status of the port.
                                     ntronPortMirroringRx 1.3.6.1.4.1.28381.700.7.7.3.1.3 integer32 read-write
This object shows the mirror Rx status of the port.
                         ntronPortConfigGroup 1.3.6.1.4.1.28381.700.7.8
                             ntronPortConfigTable 1.3.6.1.4.1.28381.700.7.8.1 no-access
The table which contains the statistics information of the ports.
                                 ntronPortConfigEntry 1.3.6.1.4.1.28381.700.7.8.1.1 no-access
An entry in the ntronPortStatisticsTable.
                                     ntronPortNo 1.3.6.1.4.1.28381.700.7.8.1.1.1 integer32 read-only
This object identifies the port of the switch.
                                     ntronPortName 1.3.6.1.4.1.28381.700.7.8.1.1.2 displaystring read-only
This attribute associates a user defined string name with the port.
                                     ntronPortAdminState 1.3.6.1.4.1.28381.700.7.8.1.1.3 integer read-write
This attribute allows an administrative request to disable or enable communications on this port. Enumeration: 'disabled': 1, 'enabled': 2.
                                     ntronPortSpeed 1.3.6.1.4.1.28381.700.7.8.1.1.4 integer read-write
This attribute allows an administrative request to read/write the speed of this port. Enumeration: 'tenMbps': 1, 'hundredMbps': 2, 'thousandMbps': 3.
                                     ntronPortDuplexStatus 1.3.6.1.4.1.28381.700.7.8.1.1.5 integer read-write
This attribute allows an administrative request to read the status of Duplex on this port. Enumeration: 'full': 2, 'half': 1.
                                     ntronPortLinkState 1.3.6.1.4.1.28381.700.7.8.1.1.6 integer read-only
This attribute allows an administrative request to read the status of link state on this port. Enumeration: 'down': 1, 'up': 2.
                                     ntronPortPriority 1.3.6.1.4.1.28381.700.7.8.1.1.7 integer32 read-write
This attribute allows an administrative request to read/write the Priority of the port.
                                     ntronPortFlowControl 1.3.6.1.4.1.28381.700.7.8.1.1.8 integer read-write
This per-port attribute describes whether the port identified has flow Control Enabled or not. Flow Control on Full Duplex and Half Duplex is detected and Automatically, flow control accordingly is taken care of. BY Default, Flow Control is Disabled. Enumeration: 'enable': 2, 'disable': 1.
                                     ntronPortBackPressure 1.3.6.1.4.1.28381.700.7.8.1.1.9 integer read-write
This per-port attribute describes whether the port identified has BackPressure Enabled or not. BY Default, BackPressure is Disabled. Enumeration: 'enable': 2, 'disable': 1.
                                     ntronPortAutonegotiation 1.3.6.1.4.1.28381.700.7.8.1.1.10 integer read-write
This per-port attribute describes whether the port identified has AutoNegotiation Enabled or not. BY Default, BackPressure is Disabled. Enumeration: 'enable': 2, 'disable': 1.
                                     ntronPortOverWritePriority 1.3.6.1.4.1.28381.700.7.8.1.1.11 integer read-write
This per-port attribute describes whether the port identified has OverWritePriority Enabled or not. BY Default, BackPressure is Disabled. Enumeration: 'enable': 2, 'disable': 1.
                                     ntronPortPVID 1.3.6.1.4.1.28381.700.7.8.1.1.12 integer32 read-write
This is the port VLAN ID.
                                     ntronPortCrossover 1.3.6.1.4.1.28381.700.7.8.1.1.13 integer read-write
This is the port setting for Crossover. Enumeration: 'auto': 1, 'yes': 2, 'no': 3.
                         ntronIgmpGroup 1.3.6.1.4.1.28381.700.7.9
                             ntronIgmpState 1.3.6.1.4.1.28381.700.7.9.1 integer read-write
This object holds the current state of the igmp. By configuring this to Enable, the igmp will be enabled. Enumeration: 'enable': 2, 'disable': 1.
                             ntronQueryMode 1.3.6.1.4.1.28381.700.7.9.2 integer read-write
To set the switch's query mode. Enumeration: 'on': 3, 'off': 1, 'auto': 2.
                             ntronRouterMode 1.3.6.1.4.1.28381.700.7.9.3 integer read-write
To set the switch's router mode. Enumeration: 'auto': 2, 'none': 1, 'manual': 3.
                             ntronIgmpMemberTable 1.3.6.1.4.1.28381.700.7.9.4 no-access
The table that contains the information about the igmp members.
                                 ntronIgmpMemberEntry 1.3.6.1.4.1.28381.700.7.9.4.1 no-access
An entry in the igmp member table.
                                     ntronIgmpMemberTableIndex 1.3.6.1.4.1.28381.700.7.9.4.1.1 integer32 read-only
The unique identifier to identify the igmp member.
                                     ntronIgmpGroupIpAddress 1.3.6.1.4.1.28381.700.7.9.4.1.2 ipaddress read-only
The IpAddress of the Multicast Group.
                                     ntronIgmpPortNumber 1.3.6.1.4.1.28381.700.7.9.4.1.3 integer32 read-only
The port number from which the multicast Ip is received.
                                     ntronIgmpVlanId 1.3.6.1.4.1.28381.700.7.9.4.1.4 integer32 read-only
The Vlan Id to which the igmpPortNumber belongs.
                             ntronIgmpRouterTable 1.3.6.1.4.1.28381.700.7.9.5 no-access
The table that contains the information about the igmp routers.
                                 ntronIgmpRouterEntry 1.3.6.1.4.1.28381.700.7.9.5.1 no-access
An entry in the igmp router table.
                                     ntronIgmpRouterTableIndex 1.3.6.1.4.1.28381.700.7.9.5.1.1 integer32 read-only
The unique identifier to identify the igmp router.
                                     ntronIgmpRouterIpAddress 1.3.6.1.4.1.28381.700.7.9.5.1.2 ipaddress read-only
The IpAddress of the Router.
                                     ntronIgmpRouterPortNumber 1.3.6.1.4.1.28381.700.7.9.5.1.3 integer32 read-only
The port no from which the router query has been received.
                             ntronIgmpPortTable 1.3.6.1.4.1.28381.700.7.9.6 no-access
The table that contains the information about the igmp port status.
                                 ntronIgmpPortEntry 1.3.6.1.4.1.28381.700.7.9.6.1 no-access
An entry in the igmp port table.
                                     ntronIgmpPortTableIndex 1.3.6.1.4.1.28381.700.7.9.6.1.1 integer32 read-only
The unique identifier to identify the igmp port.
                                     ntronIgmpPortManRouter 1.3.6.1.4.1.28381.700.7.9.6.1.2 integer read-write
Per-Port Attribute for if the port is a Manual Router Port Enumeration: 'enable': 2, 'disable': 1.
                                     ntronIgmpPortRFilter 1.3.6.1.4.1.28381.700.7.9.6.1.3 integer read-write
Per-Port Attribute for if the port has RFilter enabled Enumeration: 'enable': 2, 'disable': 1.
                         ntronBroadcastGroup 1.3.6.1.4.1.28381.700.7.13
                               ntronBroadcastBPCLTable 1.3.6.1.4.1.28381.700.7.13.1 no-access
The table that contains the information about the best packet count limit.
                                   ntronBroadcastBPCLEntry 1.3.6.1.4.1.28381.700.7.13.1.1 no-access
An entry in the ntronBroadcastBPCLTable.
                                       ntronBroadcastPortNumber 1.3.6.1.4.1.28381.700.7.13.1.1.1 integer32 read-only
The unique identifier to identify the entry in the ntronBroadcastBPCLTable.
                                       ntronBroadcastPercentage 1.3.6.1.4.1.28381.700.7.13.1.1.2 integer32 read-write
The percentage of broadcast packets that can be allowed.
                         ntronConfigGroup 1.3.6.1.4.1.28381.700.7.14
                               ntronConfigSave 1.3.6.1.4.1.28381.700.7.14.1 integer read-write
If this configurable object is set to enable then all the Configured data of the all the modules is written into flash. Enumeration: 'enable': 2, 'disable': 1.
                               ntronConfigErase 1.3.6.1.4.1.28381.700.7.14.2 integer read-write
Setting this object to the value mentioned above will cause the specific function to be called. When performing the enable action either the config flags below or the same defaults as on the web will be used if not set as below. Any of the other options will ignore the below flags and do as they are described Enumeration: 'enable': 2, 'keepipandusers': 5, 'keepusers': 4, 'keepip': 3, 'disable': 1.
                               ntronConfigEraseFlags 1.3.6.1.4.1.28381.700.7.14.3 integer read-write
If not manually set by the user the web default values will be used in the above action. Flags are reset to use the default values when ntronConfigErase is complete Enumeration: 'keepUsers': 2, 'keepMacSec': 16, 'keepDHCPS': 8, 'keepIp': 1, 'keepSNMP': 4.
                         ntronSnmpGroup 1.3.6.1.4.1.28381.700.7.15
                               ntronSnmpGetCommunityName 1.3.6.1.4.1.28381.700.7.15.1 displaystring read-write
The community name used to authenticate the get/getnext request from snmp Manager.
                               ntronSnmpTrapCommunityName 1.3.6.1.4.1.28381.700.7.15.2 displaystring read-write
The community name used to authenticate the Trap request to snmp Manager.
                               ntronSnmpManagerIpAddressTable 1.3.6.1.4.1.28381.700.7.15.3 no-access
The ip address table of the snmp managers.
                                   ntronSnmpManagerIpAddressEntry 1.3.6.1.4.1.28381.700.7.15.3.1 no-access
An entry in the ntronSnmpManagerIpAddressTable
                                       ntronSnmpManagerTableIndex 1.3.6.1.4.1.28381.700.7.15.3.1.1 integer32 read-only
The index of the snmp manager.
                                       ntronSnmpManagerIpAddress 1.3.6.1.4.1.28381.700.7.15.3.1.2 ipaddress read-write
The Ip Address of the snmp Manager.
                         ntronNRingGroup 1.3.6.1.4.1.28381.700.7.16
                               ntronNRingMode 1.3.6.1.4.1.28381.700.7.16.1 integer read-only
Operational mode of NRing system. Enumeration: 'disabled': 1, 'activemember': 3, 'manager': 4, 'multimember': 5, 'automember': 2.
                               ntronNRingState 1.3.6.1.4.1.28381.700.7.16.2 integer read-only
Status of NRing system. Enumeration: 'healthy': 1, 'broken-hi': 3, 'broken-lo': 2, 'broken': 4.
                               ntronNRingVersion 1.3.6.1.4.1.28381.700.7.16.3 integer32 read-only
Version of NRing system.
                         ntronTrapGroup 1.3.6.1.4.1.28381.700.7.18
                               ntronPowerChange 1.3.6.1.4.1.28381.700.7.18.1
An ntronPowerChange trap signifies that the sending SNMP application entity recognizes a change in the power fault variable either from a power failure or a restoration of power.