NT-ENTERPRISE-DATA-TASMAN-MGMT-ETHERNET-MIB: View SNMP OID List / Download MIB

VENDOR: NORTHERN TELECOM


 Home MIB: NT-ENTERPRISE-DATA-TASMAN-MGMT-ETHERNET-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, NT-ENTERPRISE-DATA-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 nnethernetMib 1.3.6.1.4.1.562.73.1.1.2.4
Ethernet MIB for defining ethernet parameters
     nnethernetTable 1.3.6.1.4.1.562.73.1.1.2.4.1 no-access
Ethernet management related parameters are defined in this table.
         nnethernetTableEntry 1.3.6.1.4.1.562.73.1.1.2.4.1.1 no-access
Ethernet management parameters are listed in this table.
             nnethernetId 1.3.6.1.4.1.562.73.1.1.2.4.1.1.1 integer read-only
ethernetId is the identifier for the ethernet interfaces.
             nnethernetDescr 1.3.6.1.4.1.562.73.1.1.2.4.1.1.2 displaystring read-only
Brief description of the ethernet.The maximum length of this parameter is 25 characters.
             nnethernetDhcpRelayServerAddr 1.3.6.1.4.1.562.73.1.1.2.4.1.1.3 ipaddress read-only
The DHCP relay server Ipaddress.
             nnethernetDhcpRelayGatewayAddr 1.3.6.1.4.1.562.73.1.1.2.4.1.1.4 ipaddress read-only
The DHCP relay gateway address.
             nnethernetFailOverEnable 1.3.6.1.4.1.562.73.1.1.2.4.1.1.5 truthvalue read-only
This object toggles the failover enable mode for a particular Ethernet interface. The default mode is failover disabled. At present this is only applicable for data using source forwarding on an Ethernet interface. If failover is enabled on a particular Ethernet interface and the Ethernet interface link goes down, source forwarded traffic will switch over to the other Ethernet interface.
             nnethernetHoldDownTime 1.3.6.1.4.1.562.73.1.1.2.4.1.1.6 integer read-only
The time, in seconds, that an Ethernet interface should be in holdDown when it receives an up signal. In other words, no source forwarding traffic should be sent on the Ethernet interface during the holdDown time period. The default is 3 seconds and the maximum is 900 seconds (15 minutes). This applies when failover is enabled on the interface and traffic has switched over to the other Ethernet interface .
             nnethernetIcmpRedirectEnable 1.3.6.1.4.1.562.73.1.1.2.4.1.1.7 truthvalue read-only
This object toggles the ICMP redirect mode for a particular Ethernet interface. The default mode is redirect disabled.
             nnethernetIcmpUnreachableEnable 1.3.6.1.4.1.562.73.1.1.2.4.1.1.8 truthvalue read-only
This object toggles the ICMP unreachable mode for a particular Ethernet interface. The default mode is unreachable disabled.
             nnethernetIpAddr 1.3.6.1.4.1.562.73.1.1.2.4.1.1.9 ipaddress read-only
The ethernet IP address. The parameters ethernetIpAddr and ethernetSubnetMask have to be set together,giving first IpAddress and then Subnetmask, in a same request. Unless an IpAddress and a Subnet mask are not set the network activity for the specified ethernet interface will not be up for service.
             nnethernetSubnetMask 1.3.6.1.4.1.562.73.1.1.2.4.1.1.10 ipaddress read-only
The ethernet subnet mask. The parameters ethernetIpAddr and ethernetSubnetMask have to be set together,giving first IpAddress and then Subnetmask, in a same request. Unless an IpAddress and a Subnet mask are not set the network activity for the specified ethernet interface will not be up for service.
             nnethernetIpDirectedBroadcastEnable 1.3.6.1.4.1.562.73.1.1.2.4.1.1.11 truthvalue read-only
This object toggles the IP directed braodcast mode for a particular Ethernet interface. The default mode is unreachable disabled.
             nnethernetIpMulticast 1.3.6.1.4.1.562.73.1.1.2.4.1.1.12 integer read-only
Specifies the multicast type. Enumeration: 'ospfrip2': 3, 'block': 2, 'pass': 1.
             nnethernetMtu 1.3.6.1.4.1.562.73.1.1.2.4.1.1.13 integer32 read-only
Specifies the message transfer size. It has a range of 64-4072. The default value is 1500.
             nnethernetSpeed 1.3.6.1.4.1.562.73.1.1.2.4.1.1.14 integer read-only
Specifies the ethernet speed. The values are 10 or 100 or auto. Enumeration: 'speed-100MBPs': 2, 'speed-Auto': 3, 'speed-10MBPs': 1.
             nnethernetMode 1.3.6.1.4.1.562.73.1.1.2.4.1.1.15 integer read-only
Specifies the ethernet mode to be half-duplex or full-duplex. The default value is half-duplex. Enumeration: 'half-duplex': 1, 'full-duplex': 2.
             nnethernetShutdownEnable 1.3.6.1.4.1.562.73.1.1.2.4.1.1.16 truthvalue read-only
This object when enabled shuts down the particular Ehternet interface. Default value is disabled. Both cannot be shutdown at same time. Either of the two Ethernet interfaces, with valid IpAddress, should be up and running for a network activity.
             nnethernetVlanId 1.3.6.1.4.1.562.73.1.1.2.4.1.1.17 integer read-only
Vlan Tagging enabled in VLAN forwarding mode for this Id.
             nnethernetRowStatus 1.3.6.1.4.1.562.73.1.1.2.4.1.1.18 rowstatus read-only
RowStatus is used to add/delete a row in the table. Adding or deleting a row corresponds to creating or deleting an ethernet entry. In order to add a row to the ethernet table, a set should be done with the value 4 (createAndGo) along with the value of 65535 as an index for both RowStatus and Ethernet Descr. A request to create a row can be completed successfully if and only if a set on the ethernetRowStatus and the ethernetDescr come in the same request with first RowStatus and then Ethernet Description. To delete a row this parameter has to be set with the value 6(destroy).
             nnethernetDropPackets 1.3.6.1.4.1.562.73.1.1.2.4.1.1.19 counter32 read-only
The total number of drop packet statistics for the LAN interface when the box encounters packet drops like Tunnel encapsulation errors, VLAN packets dropped due to QoS (classification errors, queuing errors),VLAN packets dropped due to RED, Input/Output interface is down with respect to VLAN, VLAN errors such as unrecognized VLAN id, multiple dot1q encapsulations in the packet, system errors from the time box is up. This list is only a subset of the numerous reasons for the packets to be dropped by the agent per interface