NSCDXCDA-MIB: View SNMP OID List / Download MIB

VENDOR: NSC


 Home MIB: NSCDXCDA-MIB
Download as:   
NSC-MIB, SNMPv2-CONF, SNMPv2-TC, SNMPv2-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 nscDxCda 1.3.6.1.4.1.10.2.1.3.3
     nscDxCdaTraceInfoTable 1.3.6.1.4.1.10.2.1.3.3.1 no-access
List of trace information entries.
         nscDxCdaTraceInfoEntry 1.3.6.1.4.1.10.2.1.3.3.1.1 no-access
Trace information entry.
             nscDxCdaTraceInfoEntKeyId 1.3.6.1.4.1.10.2.1.3.3.1.1.1 integer read-only
Processor Key ID (KID). This is a unique value for each interface.
             nscDxCdaTraceInfoEntTraceSeverity 1.3.6.1.4.1.10.2.1.3.3.1.1.2 integer read-write
Trace buffer severity level. Higher numbers indicate that the message is more important than lower numbers.
             nscDxCdaTraceInfoEntTraceFacilityMask 1.3.6.1.4.1.10.2.1.3.3.1.1.3 integer read-write
Bit mask of trace facilities enabled. Facilities available: Executive (0x00000001), Console (0x00000002), Packets (0x00000004), Bridge (0x00000008), LocalIP (0x00000010), Dlcx (0x00000020), Xport (0x00020000), Session (0x00040000), Device (0x00080000), Bus&tag (0x00100000), Escon (0x00200000), Greenline (0x00400000), Ho15 (0x00800000), Isr (0x01000000), All (0xffffffff), None (0x0)
             nscDxCdaTraceInfoEntTrapSeverity 1.3.6.1.4.1.10.2.1.3.3.1.1.4 integer read-write
Trap severity level. Higher numbers indicate that the message is more important than lower numbers.
             nscDxCdaTraceInfoEntTrapFacilityMask 1.3.6.1.4.1.10.2.1.3.3.1.1.5 integer read-write
Bit mask of trap facilities enabled. Facilities available: Executive (0x00000001), Console (0x00000002), Packets (0x00000004), Bridge (0x00000008), LocalIP (0x00000010), Dlcx (0x00000020), Xport (0x00020000), Session (0x00040000), Device (0x00080000), Bus&tag (0x00100000), Escon (0x00200000), Greenline (0x00400000), Ho15 (0x00800000), Isr (0x01000000), All (0xffffffff), None (0x0)
             nscDxCdaTraceInfoEntFacility 1.3.6.1.4.1.10.2.1.3.3.1.1.6 integer read-only
Facility (activity in progress) of last trace/trap. Enumeration: 'bridge': 3, 'console': 1, 'isr': 24, 'executive': 0, 'packets': 2, 'ho15': 23, 'localip': 4, 'bus-tag': 20, 'session': 18, 'dlcx': 5, 'device': 19, 'xport': 17, 'greenline': 22, 'escon': 21.
             nscDxCdaTraceInfoEntSeverity 1.3.6.1.4.1.10.2.1.3.3.1.1.7 integer read-only
Severity of last trace/trap. Higher numbers indicate that the message is more important than lower numbers.
             nscDxCdaTraceInfoEntMsgnum 1.3.6.1.4.1.10.2.1.3.3.1.1.8 integer read-only
Message number representing the last trace/trap.
             nscDxCdaTraceInfoEntTimestamp 1.3.6.1.4.1.10.2.1.3.3.1.1.9 counter read-only
Timestamp of last trace/trap. This value is an unsigned 32 bit integer which wraps when it reaches it highest value. The speed that the count changes is board dependent, but it is usually the processor clock speed.
             nscDxCdaTraceInfoEntMsg 1.3.6.1.4.1.10.2.1.3.3.1.1.10 displaystring read-only
Ascii string of last trace/trap.
     nscDxCdaTraceTable 1.3.6.1.4.1.10.2.1.3.3.2 no-access
List of trace entries.
         nscDxCdaTraceEntry 1.3.6.1.4.1.10.2.1.3.3.2.1 no-access
Trace entry.
             nscDxCdaTraceEntKeyId 1.3.6.1.4.1.10.2.1.3.3.2.1.1 integer read-only
Processor Key ID (KID). This is a unique value for each interface.
             nscDxCdaTraceEntNum 1.3.6.1.4.1.10.2.1.3.3.2.1.2 integer read-only
Trace entry number.
             nscDxCdaTraceEntFacility 1.3.6.1.4.1.10.2.1.3.3.2.1.3 integer read-only
Facility of this trace message. Enumeration: 'bridge': 3, 'console': 1, 'isr': 24, 'executive': 0, 'packets': 2, 'ho15': 23, 'localip': 4, 'bus-tag': 20, 'session': 18, 'dlcx': 5, 'device': 19, 'xport': 17, 'greenline': 22, 'escon': 21.
             nscDxCdaTraceEntSeverity 1.3.6.1.4.1.10.2.1.3.3.2.1.4 integer read-only
Severity of this trace message. Higher numbers indicate that the message is more important than lower numbers.
             nscDxCdaTraceEntMsgnum 1.3.6.1.4.1.10.2.1.3.3.2.1.5 integer read-only
Message number representing this trace message.
             nscDxCdaTraceEntTimestamp 1.3.6.1.4.1.10.2.1.3.3.2.1.6 counter read-only
Timestamp of last trace/trap. This value is an unsigned 32 bit integer which wraps when it reaches it highest value. The speed that the count changes is board dependent, but it is usually the processor clock speed.
             nscDxCdaTraceEntMsg 1.3.6.1.4.1.10.2.1.3.3.2.1.7 displaystring read-only
Ascii string of this trace message.
     nscDxCdaProfilesTable 1.3.6.1.4.1.10.2.1.3.3.3 no-access
List of profile entries.
         nscDxCdaProfilesEntry 1.3.6.1.4.1.10.2.1.3.3.3.1 no-access
Profile entry.
             nscDxCdaProfilesEntKeyId 1.3.6.1.4.1.10.2.1.3.3.3.1.1 integer read-only
Processor Key ID (KID). This is a unique value for each interface.
             nscDxCdaProfilesEntDateWritten 1.3.6.1.4.1.10.2.1.3.3.3.1.2 integer read-only
The date that the profiles were last saved. The date is stored with the high order (first) byte zero, the second byte is the month, the third byte is the day and the low order (fourth) byte is the year. Each byte is stored as two, four bit decimal digits (BCD). For example the value 0x11 represents 11 in decimal.
             nscDxCdaProfilesEntTimeWritten 1.3.6.1.4.1.10.2.1.3.3.3.1.3 integer read-only
The time that the profiles were last saved. The time is stored with the high order (first) byte zero, the second byte is the hour, the third byte is the minute and the low order (fourth) byte is the second. Each byte is stored as two, four bit decimal digits (BCD). For example the value 0x53 represents 53 in decimal.
             nscDxCdaProfilesEntName 1.3.6.1.4.1.10.2.1.3.3.3.1.4 displaystring read-write
Console name displayed in console prompt.
             nscDxCdaProfilesEntSaveProfiles 1.3.6.1.4.1.10.2.1.3.3.3.1.5 integer read-write
Toggle switch to save profiles in eeprom. Enumeration: 'up-to-date': 2, 'modified': 1.
             nscDxCdaProfilesEntProcessorSpecific 1.3.6.1.4.1.10.2.1.3.3.3.1.6 object identifier read-only
A reference to MIB definitions specific to the particular processor being used to realize the interface. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.
   nscDxTrace 1.3.6.1.4.1.10.2.1.30.1
The nscDxTrace event is generated when a trace message is generated with (1) severity greater or equal to the trap severity and (2) facility included in the trap faclility.