NORTEL-SECURE-NETWORK-ACCESS-MIB: View SNMP OID List / Download MIB

VENDOR: SYNOPTICS


 Home MIB: NORTEL-SECURE-NETWORK-ACCESS-MIB
Download as:   
SNMPv2-CONF, SYNOPTICS-ROOT-MIB, IF-MIB, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, INET-ADDRESS-MIB, Q-BRIDGE-MIB, RAPID-CITY, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 nortelSecureNetworkAccessMib 1.3.6.1.4.1.45.5.10
Nortel Networks NSNA MIB Copyright 2004 Nortel Networks, Inc. All rights reserved. This Nortel Networks SNMP Management Information Base Specification embodies Nortel Networks' confidential and proprietary intellectual property. Nortel Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS,' and Nortel Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
       nsnaNotifications 1.3.6.1.4.1.45.5.10.0
           nsnaClosedConnectionToSnas 1.3.6.1.4.1.45.5.10.0.1
This notification is generated whenever the device closes the connection to the NSNAS. The reason why the connection is closed is indicated in nsnaClosedConnectionReason.
           nsnaStatusQuoIntervalExpired 1.3.6.1.4.1.45.5.10.0.2
This notification is generated whenever the status-quo interval expires after the connection to the NSNAS has closed. Note that if the configured status-quo interval is 0 (indicating no status quo interval), this notification will be generated at the same time as the corresponding nsnaClosedConnectionToSnas notification.
           nsnaInvalidMessageFromSnas 1.3.6.1.4.1.45.5.10.0.3
This notification is generated whenever the device receives an invalid message from the NSNAS. This generally means that the received message is corrupted. As much of the message header as is available will be included in nsnaInvalidMessageHeader.
           nsnaSnasConnected 1.3.6.1.4.1.45.5.10.0.4
This notification is generated whenever an NSNAS successfully connects to the switch.
       nsnaObjects 1.3.6.1.4.1.45.5.10.1
           nsnaScalars 1.3.6.1.4.1.45.5.10.1.1
               nsnaEnabled 1.3.6.1.4.1.45.5.10.1.1.1 truthvalue read-write
Indicates whether NSNA is globally enabled for the system.
               nsnaNsnasConnectionState 1.3.6.1.4.1.45.5.10.1.1.3 integer read-only
Indicates whether the switch currently has a connection to an NSNAS, whether the switch is currently in the process of establishing a connection to an NSNAS, or whether an existing connecting to an NSNAS is in the process of being closed. Enumeration: 'notConnected': 1, 'connecting': 3, 'closing': 4, 'connected': 2.
               nsnaNsnasInetAddressType 1.3.6.1.4.1.45.5.10.1.1.4 inetaddresstype read-only
If a NSNAS is currently connected to the switch, this indicates the type of the internet address from which the NSNAS connected. The contents of nsnaSnasInetAddress will be of this type. If there is not currently a NSNAS connected, the value will be unknown(0).
               nsnaNsnasInetAddress 1.3.6.1.4.1.45.5.10.1.1.5 inetaddress read-only
If a NSNAS is currently connected to the switch, this indicates the internet address from which the NSNAS connected. If there is not currently a NSNAS connected, this will be an empty string.
               nsnaNsnasSendHelloInterval 1.3.6.1.4.1.45.5.10.1.1.6 integer32 read-only
The interval for sending SSCP Hello messages for the current SSCP connection. If this period of time passes without any SSCP messages being sent, a Hello message will be generated. If there is not curently an NSNAS connected, this value will be zero, otherwise it will be non-zero.
               nsnaNsnasInactivityInterval 1.3.6.1.4.1.45.5.10.1.1.7 integer32 read-only
The inactivity interval for the current SSCP connection. If this period of time passes without any SSCP messages being received, the SSCP connection will be closed. If there is not curently an NSNAS connected, this value will be zero, otherwise it will be non-zero.
               nsnaNsnasStatusQuoInterval 1.3.6.1.4.1.45.5.10.1.1.8 integer32 read-only
The status-quo interval for the current or last SSCP connection. If the NSNAS is disconnected from the switch for any reason, the switch will wait this period of time before moving all NSNA enabled ports to the red VLAN. The maximum value, 65535, indicates an infinite status quo interval, i.e., SSA enabled ports will not be moved to the red VLAN. A value of 0 means no status quo interval is used, and ports are immediately moved the the red VLAN if the NSNAS is disconnected. If the NSNAS has disconnected and the status-quo interval timer is running, this value will reflect the remaining time until the status-quo timer will expire.
               nsnaMacAuthenticationEnabled 1.3.6.1.4.1.45.5.10.1.1.9 truthvalue read-only
This object indicates whether MAC Authentication is currently enabled on the switch.
               nsnaFailOpenEnabled 1.3.6.1.4.1.45.5.10.1.1.10 truthvalue read-write
This object indicates whether the Fail-Open feature is currently enabled on the switch.
               nsnaFailOpenVlan 1.3.6.1.4.1.45.5.10.1.1.11 vlanidornone read-write
This object indicates the current Fail-Open Vlan ID. A value of 0 indicates the value either has not been set, or that the previous value is no longer valid.
               nsnaFailOpenFilterVlan 1.3.6.1.4.1.45.5.10.1.1.12 vlanidornone read-write
This object indicates the current Vlan ID whose associated filters are to be used as the Fail-Open filters. A value of 0 indicates the value either has not been set, or that the previous value is no longer valid.
               nsnaNsnasConnectionVersion 1.3.6.1.4.1.45.5.10.1.1.14 integer32 read-only
This object indicates the SSCP version being used in the current NSNAS connection. If there is no current connection, the value will be 0.
               nsnaNsnasRadiusServerEnabled 1.3.6.1.4.1.45.5.10.1.1.15 truthvalue read-only
This object indicates whether the NSNAS currently connected to the switch is acting as a RADIUS server.
               nsnaNsnasRadiusServerPort 1.3.6.1.4.1.45.5.10.1.1.16 inetportnumber read-only
If there is an NSNAS currently connected to the switch that is acting as a RADIUS server, this object returns the port on which that server listens for RADIUS requests.
           nsnaNsnasTable 1.3.6.1.4.1.45.5.10.1.2 no-access
The table of subnets from which NSNASs will connect.
               nsnaNsnasEntry 1.3.6.1.4.1.45.5.10.1.2.1 no-access
A set of objects that specify a subnet from which NSNASs will connect, along with related configuration parameters.
                   nsnaNsnasAddressType 1.3.6.1.4.1.45.5.10.1.2.1.1 inetaddresstype no-access
The type of internet address contained in nsnaNsnasAddress.
                   nsnaNsnasAddress 1.3.6.1.4.1.45.5.10.1.2.1.2 inetaddress no-access
The internet address portion of the NSNAS subnet. This combined with the value of nsnaNsnasAddressMask specifies the subnet of the NSNAS.
                   nsnaNsnasAddressMask 1.3.6.1.4.1.45.5.10.1.2.1.3 inetaddressprefixlength no-access
The address mask portion of the NSNAS subnet. This combined with the value of nsnaNsnasAddress specifies the subnet of the NSNAS.
                   nsnaNsnasPort 1.3.6.1.4.1.45.5.10.1.2.1.4 inetportnumber read-only
The port on which NSNASs connecting from this subnet will connect.
                   nsnaNsnasRowStatus 1.3.6.1.4.1.45.5.10.1.2.1.5 rowstatus read-only
This object is used for row create/deletion.
           nsnaPortTable 1.3.6.1.4.1.45.5.10.1.3 no-access
The table of per-port NSNA configuration parameters. There must be an entry in this table for each NSNA-capable port.
               nsnaPortEntry 1.3.6.1.4.1.45.5.10.1.3.1 no-access
NSNA configuration parameters for a port.
                   nsnaPortIfIndex 1.3.6.1.4.1.45.5.10.1.3.1.1 interfaceindex no-access
The ifIndex corresponding to the port.
                   nsnaPortMode 1.3.6.1.4.1.45.5.10.1.3.1.2 integer read-write
The NSNA mode of the port. Enumeration: 'disabled': 1, 'dynamic': 3, 'static': 2, 'uplink': 4, 'secure': 5.
                   nsnaPortGreenVlanId 1.3.6.1.4.1.45.5.10.1.3.1.3 nsnavlanidornone read-write
The green VLAN ID of the port. This value is only used when the corresponding value of nsnaPortMode is static(2). Otherwise, the value will be 0.
                   nsnaPortVoipVlans 1.3.6.1.4.1.45.5.10.1.3.1.4 idlist read-write
The set of VOIP VLANs to which this port belongs. This value is only used when the corresponding value of nsnaPortMode is static(2), dynamic(3), or secure(5).
                   nsnaPortUplinkVlans 1.3.6.1.4.1.45.5.10.1.3.1.5 idlist read-write
The set of uplink VLANs to which this port belongs. This value is only used when the corresponding value of nsnaPortMode is uplink(4).
                   nsnaPortState 1.3.6.1.4.1.45.5.10.1.3.1.6 integer read-only
The current NSNA color of the port. Enumeration: 'none': 1, 'green': 3, 'yellow': 4, 'red': 2.
                   nsnaPortDhcpState 1.3.6.1.4.1.45.5.10.1.3.1.7 integer read-only
The DHCP state of the port. Enumeration: 'unblocked': 2, 'blocked': 1.
                   nsnaPortHubModeEnabled 1.3.6.1.4.1.45.5.10.1.3.1.8 truthvalue read-write
Indicates whether Hub Mode is enabled on a port.
                   nsnaPortHubModeMaxClients 1.3.6.1.4.1.45.5.10.1.3.1.9 integer32 read-write
The maximum number of clients allowed on a port when Hub Mode is enabled. The value is ignored if Hub Mode is disabled.
           nsnaVlanTable 1.3.6.1.4.1.45.5.10.1.4 no-access
The table of per-Vlan NSNA configuration parameters. There must be an entry in this table for every Vlan.
               nsnaVlanEntry 1.3.6.1.4.1.45.5.10.1.4.1 no-access
NSNA configuration parameters for a Vlan.
                   nsnaVlanId 1.3.6.1.4.1.45.5.10.1.4.1.1 vlanid no-access
The ID of the Vlan.
                   nsnaVlanColor 1.3.6.1.4.1.45.5.10.1.4.1.2 integer read-write
The NSNA color of the Vlan. Enumeration: 'voip': 5, 'none': 1, 'green': 3, 'yellow': 4, 'red': 2.
                   nsnaVlanFilterSetName 1.3.6.1.4.1.45.5.10.1.4.1.3 snmpadminstring read-write
The name of the filter set associated with the VLAN. An empty value means that no filter set is associated with the VLAN.
                   nsnaVlanFilterSetId 1.3.6.1.4.1.45.5.10.1.4.1.4 integer32 read-write
The ID of the filter set associated with the VLAN. A value of 0 means that no filter set is associated with the VLAN.
                   nsnaVlanYellowSubnetType 1.3.6.1.4.1.45.5.10.1.4.1.5 inetaddresstype read-write
The type of internet address contained in the corresponding instance of nsnaVlanYellowSubnet.
                   nsnaVlanYellowSubnet 1.3.6.1.4.1.45.5.10.1.4.1.6 inetaddress read-write
The yellow subnet address of the VLAN. This value is only used when the corresponding value of nsnaVlanColor is yellow(4).
                   nsnaVlanYellowSubnetMask 1.3.6.1.4.1.45.5.10.1.4.1.7 inetaddressprefixlength read-write
The number of bits in the network mask of the yellow subnet address of the VLAN. This value is only used when the corresponding value of nsnaVlanColor is yellow(4).
           nsnaClientTable 1.3.6.1.4.1.45.5.10.1.5 no-access
The table of per-client NSNA state information. There must be an entry in this table for every NSNA client.
               nsnaClientEntry 1.3.6.1.4.1.45.5.10.1.5.1 no-access
State information for an NSNA client.
                   nsnaClientIfIndex 1.3.6.1.4.1.45.5.10.1.5.1.1 interfaceindex no-access
The ifIndex of the port on which the client is attached.
                   nsnaClientMacAddress 1.3.6.1.4.1.45.5.10.1.5.1.2 macaddress no-access
The MAC address of the client.
                   nsnaClientDeviceType 1.3.6.1.4.1.45.5.10.1.5.1.3 integer read-only
The type of device of the client. Enumeration: 'passive': 3, 'unknown': 0, 'ipPhone': 2, 'pc': 1.
                   nsnaClientVlanId 1.3.6.1.4.1.45.5.10.1.5.1.4 vlanid read-only
The Vlan ID of the client.
                   nsnaClientAddressType 1.3.6.1.4.1.45.5.10.1.5.1.5 inetaddresstype read-only
The type of address contained in the corresponding instance of nsnaClientAddress.
                   nsnaClientAddress 1.3.6.1.4.1.45.5.10.1.5.1.6 inetaddress read-only
The IP address of the client.
                   nsnaClientExpired 1.3.6.1.4.1.45.5.10.1.5.1.7 truthvalue read-only
Indicates whether this client has been aged-out.
                   nsnaClientFilterVlanId 1.3.6.1.4.1.45.5.10.1.5.1.8 vlanid read-only
The Vlan ID whose associated filter set is installed on this port for this client. This is used when MAC Authentication is enabled. If MAC Authentication is no enabled, this object will return the same value as nsnaClientVlanId.
                   nsnaClientStatus 1.3.6.1.4.1.45.5.10.1.5.1.9 integer read-only
The status of this client. Enumeration: 'blacklistedByNsnas': 5, 'authenticatedByNsnas': 1, 'isolatedByNsnas': 4, 'disallowedByNsnas': 3, 'authenticatedLocally': 2.
           nsnaStaticClientTable 1.3.6.1.4.1.45.5.10.1.6 no-access
The table of static NSNA client configuration. This is used for authenticating clients on static NSNA ports.
               nsnaStaticClientEntry 1.3.6.1.4.1.45.5.10.1.6.1 no-access
Static NSNA client configuration.
                   nsnaStaticClientVlanId 1.3.6.1.4.1.45.5.10.1.6.1.1 vlanid no-access
The VLAN ID in which a client is allowed.
                   nsnaStaticClientMacAddress 1.3.6.1.4.1.45.5.10.1.6.1.2 macaddress no-access
The MAC address of an allowed client.
                   nsnaStaticClientDeviceType 1.3.6.1.4.1.45.5.10.1.6.1.3 integer read-only
The type of device of the allowed client. Enumeration: 'passive': 3, 'pc': 1, 'ipPhone': 2.
                   nsnaStaticClientAddressType 1.3.6.1.4.1.45.5.10.1.6.1.4 inetaddresstype read-only
The type of address contained in the corresponding instance of nsnaStaticClientAddress.
                   nsnaStaticClientAddress 1.3.6.1.4.1.45.5.10.1.6.1.5 inetaddress read-only
The IP address to be used for the allowed client.
                   nsnaStaticClientRowStatus 1.3.6.1.4.1.45.5.10.1.6.1.6 rowstatus read-only
Used for row creation/deletion. When creating a row, the corresponding instances of nsnaStaticClientDeviceType, nsnaStaticClientAddressType, and nsnaStaticClientAddress must be set before this object can be made active(1).
           nsnaIpPhoneSignatureTable 1.3.6.1.4.1.45.5.10.1.7 no-access
The table of IP phone signature string configuration. This is used for recognizing IP phones.
               nsnaIpPhoneSignatureEntry 1.3.6.1.4.1.45.5.10.1.7.1 no-access
IP phone signature string configuration.
                   nsnaIpPhoneSignatureString 1.3.6.1.4.1.45.5.10.1.7.1.1 octet string no-access
The signature string of an IP phone.
                   nsnaIpPhoneSignatureRowStatus 1.3.6.1.4.1.45.5.10.1.7.1.2 rowstatus read-only
Used for row creation/deletion.
           nsnaNotificationObjects 1.3.6.1.4.1.45.5.10.1.8
               nsnaClosedConnectionReason 1.3.6.1.4.1.45.5.10.1.8.1 integer no-access
Indicates the reason why the connection to the NSNAS was closed. Enumeration: 'bufferAllocationFailure': 4, 'messageProcessingFailure': 5, 'dataStreamCorrupted': 3, 'unknown': 1, 'snasClosedConnection': 2, 'nsnaAdministrativelyDown': 7, 'inactivityIntervalExpired': 6.
               nsnaInvalidMessageHeader 1.3.6.1.4.1.45.5.10.1.8.2 octet string no-access
The header of an invalid message from the NSNAS. Note that if an entire header is not available, only the portion that is available will be provided in this object.