NMS-EPON-OLT-PON: View SNMP OID List / Download MIB

VENDOR: PACIFIC BROADBANK NETWORKS


 Home MIB: NMS-EPON-OLT-PON
Download as:   
SNMPv2-CONF, SNMPv2-TC, IF-MIB, SNMPv2-SMI, NMS-OPTICAL-PORT-MIB, NMS-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 nmsEponOltPon 1.3.6.1.4.1.11606.10.101.6
     nmseponoltponTable 1.3.6.1.4.1.11606.10.101.6.1 no-access
A list of epon olt pon property table entries.
         nmsEponOltPonEntry 1.3.6.1.4.1.11606.10.101.6.1.1 no-access
A collection of additional objects in the epon olt pon property table.
             ponIfIndex 1.3.6.1.4.1.11606.10.101.6.1.1.1 integer read-only
The only diid of PON port in System.
             llidSequenceNo 1.3.6.1.4.1.11606.10.101.6.1.1.2 integer read-only
Currnet LLID seqence number.
             onuAuthMethod 1.3.6.1.4.1.11606.10.101.6.1.1.3 integer read-write
ONU authentication method. Enumeration: 'loid': 4, 'hybrid': 6, 'none': 0, 'manual': 1, 'mac': 3.
             isCheckOnuMac 1.3.6.1.4.1.11606.10.101.6.1.1.4 integer read-only
Check ONU MAC when registering. Enumeration: 'yes': 1, 'no': 2.
             isPONBelongtoPSG 1.3.6.1.4.1.11606.10.101.6.1.1.5 integer read-only
Check if PON belongs to PSG. Enumeration: 'alone-pon': 0, 'standby-pon': 3, 'b-psg': 1, 'active-pon': 2, 'c-psg': 4.
             pONBelongtoPSGID 1.3.6.1.4.1.11606.10.101.6.1.1.6 integer read-only
PSG ID that PON belongs to.
             isUsingMpcpRegisteAckDelayTime 1.3.6.1.4.1.11606.10.101.6.1.1.7 integer read-write
If using MPCP registe Ack delay time. Enumeration: 'yes': 1, 'no': 2.
             mpcpRegisteAckDelayTime 1.3.6.1.4.1.11606.10.101.6.1.1.8 integer read-write
MPCP registe Ack delay time,range is 1-50ms.
             ponIfAdminStatus 1.3.6.1.4.1.11606.10.101.6.1.1.9 integer read-write
PON interface Administration Status. Enumeration: 'down': 2, 'up': 1.
             ponIfInFecStatus 1.3.6.1.4.1.11606.10.101.6.1.1.10 integer read-write
PON interface in FEC Status. Enumeration: 'on': 1, 'off': 2.
             ponIfOutFecStatus 1.3.6.1.4.1.11606.10.101.6.1.1.11 integer read-write
PON interface out FEC Status. Enumeration: 'on': 1, 'off': 2.
             ponIfLaserStatus 1.3.6.1.4.1.11606.10.101.6.1.1.12 integer read-write
PON interface Laser Status. Enumeration: 'on': 1, 'off': 2.
             isOnuDataSwitch 1.3.6.1.4.1.11606.10.101.6.1.1.13 integer read-write
PON interface data exchange Status with ONU. Enumeration: 'on': 1, 'off': 2.
             ponIfProtectedStatus 1.3.6.1.4.1.11606.10.101.6.1.1.14 integer read-write
PON interface protected Status. Enumeration: 'on': 1, 'off': 2.
             ponIfDynamicMacLearningStatus 1.3.6.1.4.1.11606.10.101.6.1.1.15 integer read-write
PON interface dynamic MAC address learning Status. Enumeration: 'on': 1, 'off': 2.
             ponIfMacACL 1.3.6.1.4.1.11606.10.101.6.1.1.16 displaystring read-write
PON interface MAC address ACL.
             ponIfIpACL 1.3.6.1.4.1.11606.10.101.6.1.1.17 displaystring read-write
PON interface IP address ACL.
             fiberProtectHandInHand 1.3.6.1.4.1.11606.10.101.6.1.1.18 integer read-write
Fiber protect hand in hand. 1-enable,2-disable. Default is disable.
             fiberProtectGroup 1.3.6.1.4.1.11606.10.101.6.1.1.19 integer read-write
Fiber protect group. The range of groupID is 0-32. 0 means disable. Default is disable.
             splittingRatio 1.3.6.1.4.1.11606.10.101.6.1.1.20 integer read-only
Fiber splits ratio, for each OLT PON port, which means the max number of ONU.
             activeOnuNum 1.3.6.1.4.1.11606.10.101.6.1.1.21 integer read-only
Currnet active ONU number.
             inactiveOnuNum 1.3.6.1.4.1.11606.10.101.6.1.1.22 integer read-only
Currnet inactive ONU number.
             llidIfindexString 1.3.6.1.4.1.11606.10.101.6.1.1.23 octet string read-only
Llid ports ifindex string. Seperated with comma.
     ponOpticsParameterAlarmSetTable 1.3.6.1.4.1.11606.10.101.6.2 no-access
A list of epon olt pon optics Parameter Alarm set table entries.
         ponOpticsParameterAlarmSetEntry 1.3.6.1.4.1.11606.10.101.6.2.1 no-access
A collection of additional objects in the epon olt pon optics Parameter Alarm set table.
             ifIndex 1.3.6.1.4.1.11606.10.101.6.2.1.1 integer read-only
The only diid of PON port in System.
             txPowerAlarmUpLimitEnable 1.3.6.1.4.1.11606.10.101.6.2.1.2 integer read-write
Enable or disable the alarm of PON hign TX power. 1-enable, 2-disable. Default is disable. Enumeration: 'enable': 1, 'disable': 2.
             txPowerAlarmUpLimitThreshold 1.3.6.1.4.1.11606.10.101.6.2.1.3 integer read-write
The upper threshold of tx power alarm. The unit is 0.1DBm. The range is -400-82. Default is 82.
             txPowerAlarmUpLimitClearThreshold 1.3.6.1.4.1.11606.10.101.6.2.1.4 integer read-write
The upper threshold of tx power alarm cleared. The unit is 0.1DBm. The range is -400-82. Default is 82.
             txPowerAlarmLowLimitEnable 1.3.6.1.4.1.11606.10.101.6.2.1.5 integer read-write
Enable or disable the alarm of PON low TX power. 1-enable, 2-disable. Default is disable. Enumeration: 'enable': 1, 'disable': 2.
             txPowerAlarmLowLimitThreshold 1.3.6.1.4.1.11606.10.101.6.2.1.6 integer read-write
The low threshold of tx power alarm. The unit is 0.1DBm. The range is -400-82. Default is -400.
             txPowerAlarmLowLimitClearThreshold 1.3.6.1.4.1.11606.10.101.6.2.1.7 integer read-write
The low threshold tx power alarm cleared. The unit is 0.1DBm. The range is -400-82. Default is -400.
             temperatureAlarmUpLimitEnable 1.3.6.1.4.1.11606.10.101.6.2.1.8 integer read-write
Enable or disable the alarm of PON high temperature. 1-enable, 2-disable. Default is disable. Enumeration: 'enable': 1, 'disable': 2.
             temperatureAlarmUpLimitThreshold 1.3.6.1.4.1.11606.10.101.6.2.1.9 integer read-write
The upper threshold of temperature alarm. The unit is 0.1 degree. The range is -1280-1280. Default is 1280.
             temperatureAlarmUpLimitClearThreshold 1.3.6.1.4.1.11606.10.101.6.2.1.10 integer read-write
The upper threshold temperature alarm cleared. The unit is 0.1 degree. The range is -1280-1280. Default is 1280.
             temperatureAlarmLowLimitEnable 1.3.6.1.4.1.11606.10.101.6.2.1.11 integer read-write
Enable or disable the alarm of PON low temperature. 1-enable, 2-disable. Default is disable. Enumeration: 'enable': 1, 'disable': 2.
             temperatureAlarmLowLimitThreshold 1.3.6.1.4.1.11606.10.101.6.2.1.12 integer read-write
The low threshold of temperature alarm. The unit is 0.1 degree. The range is -1280-1280. Default is -1280.
             temperatureAlarmLowLimitClearThreshold 1.3.6.1.4.1.11606.10.101.6.2.1.13 integer read-write
The low threshold temperature alarm cleared. The unit is 0.1 degree. The range is -1280-1280. Default is -1280.
             voltageAlarmUpLimitEnable 1.3.6.1.4.1.11606.10.101.6.2.1.14 integer read-write
Enable or disable the alarm of PON high voltage. 1-enable, 2-disable. Default is disable. Enumeration: 'enable': 1, 'disable': 2.
             voltageAlarmUpLimitThreshold 1.3.6.1.4.1.11606.10.101.6.2.1.15 integer read-write
The upper threshold of voltage alarm. The unit is 0.1V. The range is 0-65. Default is 65.
             voltageAlarmUpLimitClearThreshold 1.3.6.1.4.1.11606.10.101.6.2.1.16 integer read-write
The upper threshold voltage alarm cleared. The unit is 0.1V. The range is 0-65. Default is 65.
             voltageAlarmLowLimitEnable 1.3.6.1.4.1.11606.10.101.6.2.1.17 integer read-write
Enable or disable the alarm of PON low voltage. 1-enable, 2-disable. Default is disable. Enumeration: 'enable': 1, 'disable': 2.
             voltageAlarmLowLimitThreshold 1.3.6.1.4.1.11606.10.101.6.2.1.18 integer read-write
The low threshold of voltage alarm. The unit is 0.1V. The range is 0-65. Default is 0.
             voltageAlarmLowLimitClearThreshold 1.3.6.1.4.1.11606.10.101.6.2.1.19 integer read-write
The low threshold voltage alarm cleared. The unit is 0.1V. The range is 0-65. Default is 0.
             currentAlarmUpLimitEnable 1.3.6.1.4.1.11606.10.101.6.2.1.20 integer read-write
Enable or disable the alarm of PON high current. 1-enable, 2-disable. Default is disable. Enumeration: 'enable': 1, 'disable': 2.
             currentAlarmUpLimitThreshold 1.3.6.1.4.1.11606.10.101.6.2.1.21 integer read-write
The upper threshold of current alarm. The unit is 0.1mA. The range is 0-1310. Default is 1310.
             currentAlarmUpLimitClearThreshold 1.3.6.1.4.1.11606.10.101.6.2.1.22 integer read-write
The upper threshold current alarm cleared. The unit is 0.1mA. The range is 0-1310. Default is 1310.
             currentAlarmLowLimitEnable 1.3.6.1.4.1.11606.10.101.6.2.1.23 integer read-write
Enable or disable the alarm of PON hign TX power. 1-enable, 2-disable. Default is disable. Enumeration: 'enable': 1, 'disable': 2.
             currentAlarmLowLimitThreshold 1.3.6.1.4.1.11606.10.101.6.2.1.24 integer read-write
The low threshold of current alarm. The unit is 0.1mA. The range is 0-1310. Default is 0.
             currentAlarmLowLimitClearThreshold 1.3.6.1.4.1.11606.10.101.6.2.1.25 integer read-write
The low threshold current alarm cleared. The unit is 0.1mA. The range is 0-1310. Default is 0.
     ponSfpParameterAlarmsNotifications 1.3.6.1.4.1.11606.10.101.6.3
         alarmStatus 1.3.6.1.4.1.11606.10.101.6.3.1 integer no-access
Alarm status definition. 1-above, 2-below, 3-normal. Enumeration: 'below': 2, 'above': 1, 'normal': 3.
         ponSfpParameterAlarmsNotification 1.3.6.1.4.1.11606.10.101.6.3.2
The agent generates this trap when olt optical module works in abnormal status or return to normal .
     ponPortMigration 1.3.6.1.4.1.11606.10.101.6.4
         ponPortMigLlidSet 1.3.6.1.4.1.11606.10.101.6.4.1 octet string read-write
Llid ports ifindex string. Seperated with semicolon. For example, if we migrate the PON port configuration from port EPON3/1(llid:25) to port EPON3/2(llid:26), this value should be set to '25;26'.