NEXTNET-MIB: View SNMP OID List / Download MIB
VENDOR: NEXTNET
| Home | MIB: NEXTNET-MIB | |||
|---|---|---|---|---|
| Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
| Object Name | OID | Type | Access | Info |
| nextnet | 1.3.6.1.4.1.4743 | |||
| expedDev | 1.3.6.1.4.1.4743.1 | |||
| expedDevMIBObjects | 1.3.6.1.4.1.4743.1.1 | |||
| expedDevBase | 1.3.6.1.4.1.4743.1.1.1 | |||
| expedDevRole | 1.3.6.1.4.1.4743.1.1.1.1 | integer | read-only |
Defines the current role of this device. cpe (1) is a Customer Premises Equipment, bssActive(2) is a Base Station System which is controlling the system of CPE devices, and bssBackup(3) is a Base Station system which is currently connected, but not controlling the system (not currently used). In general, if this device is a 'cpe', its role will not change during operation or between reboots. If the device is a 'bss' it may change between bssActive and bssBackup and back again during normal operation. At this time, the NextNet Expedience system does not support the concept of a backup BSS, bssBackup is included for completeness. Enumeration: 'bssActive': 2, 'cpe': 1, 'bssBackup': 3. |
| expedDevDateTime | 1.3.6.1.4.1.4743.1.1.1.2 | dateandtime | read-only |
The date and time, with optional timezone information. |
| expedDevSerialNumber | 1.3.6.1.4.1.4743.1.1.1.3 | displaystring | read-only |
The manufacturer's serial number for this device. |
| expedDevSTPControl | 1.3.6.1.4.1.4743.1.1.1.4 | integer | read-only |
This object controls operation of the spanning tree protocol (as distinguished from transparent bridging). If set to stEnabled(1) then the spanning tree protocol is enabled, subject to bridging constraints. If noStFilterBpdu(2), then spanning tree is not active, and Bridge PDUs received are discarded. If noStPassBpdu(3) then spanning tree is not active and Bridge PDUs are transparently forwarded. Note that a device need not implement all of these options, but that noStFilterBpdu(2) is required. Enumeration: 'noStPassBpd': 3, 'stEnabled': 1, 'noStFilterBpd': 2. |
| expedDevGpsStatus | 1.3.6.1.4.1.4743.1.1.1.5 | displaystring | read-only |
The status string coming from the GPS |
| expedDevGpsMonitorState | 1.3.6.1.4.1.4743.1.1.1.6 | integer | read-only |
The state of the GPS Clock Monitor. The following states are possible. gCState-NoGps (No GPS for this base station), gCState-Init (Waiting for init to complete), gCState-Correcting (initial time solved, needs correction) gCState-Undetermined (floating init time solution), gCState-Unreliable (init time drifted too far), gCState-Locked (full time solution), gCState-Floating (Floating full time solution), and gCState-Drifted (full time solution drifted too far. Enumeration: 'gCState-Correcting': 2, 'gCState-Drifted': 7, 'gCState-Locked': 5, 'gCState-Init': 1, 'gCState-NoGps': 0, 'gCState-Unreliable': 4, 'gCState-Floating': 6, 'gCState-Undetermined': 3. |
| expedDevGpsClockOK | 1.3.6.1.4.1.4743.1.1.1.7 | truthvalue | read-only |
Indicates whether the GPS timing pulse is considered valid. If a base is operating without a GPS unit, then this element will be True. |
| expedDevPpsStatus | 1.3.6.1.4.1.4743.1.1.1.8 | truthvalue | read-only |
Indicates whether the one-second timing pulse is being delivered to the base station. If a base is operating with a GPS unit, then the timing pulse refers to the pulse being delivered by the GPS unit. |
| expedDevAirlinkStatus | 1.3.6.1.4.1.4743.1.1.1.9 | truthvalue | read-only |
The status of the Airlink. |
| expedDevWriteFlash | 1.3.6.1.4.1.4743.1.1.1.10 | integer | read-write |
Setting this flag to enable will cause the configuration to be written to flash Enumeration: 'enable': 1, 'disable': 2. |
| expedDevRebootDevice | 1.3.6.1.4.1.4743.1.1.1.11 | integer | read-write |
Setting this flag to enable will cause the device to be rebooted Enumeration: 'enable': 1, 'disable': 2. |
| expedDevZeroStats | 1.3.6.1.4.1.4743.1.1.1.12 | integer | read-write |
Zeros out the appropriate stats Enumeration: 'none': 0, 'aaa': 4, 'relay': 5, 'all': 7, 'throughput': 6, 'device': 1, 'ethernet': 3, 'airlink': 2. |
| expedDevTemperature | 1.3.6.1.4.1.4743.1.1.1.13 | integer | read-only |
Current temperature of the device |
| expedDevModelId | 1.3.6.1.4.1.4743.1.1.1.14 | displaystring | read-only |
Model Identifier for the base station. The primary hardware features of the base station are specified by this string representation of a hexidecimal, 32-bit number with a range of 00000000 - FFFFFFFF and a format of ABCCDDEE. A => Model Category 0 => Outdoor Base Station 1 => Indoor CPE 2 => Outdoor CPE 3 => Indoor Base Station 4 => Mobile Subscriber Unit B => Reserved 0 => Default CC => Board Type 01 => FPGA Wedge 02 => Dual Board ASIC Wedge, Davicom 03 => Single Board ASIC Wedge, SMSC, Indoor 04 => Single Board ASIC, SMSC, Outdoor 05 => Slimline, ASIC 12 => AMOD Dual Board, ASIC 15 => AMOD Slimline, ASIC 16 => AMOD 5407 Coldfire, ASIC 17 => AMOD LX CPE 18 => AMOD LX SoC CPE 22 => AMOD 5484 Coldfire, ASIC Base DD => Reserved 00 => 2.6 GHz 01 => 3.3 GHz 02 => 3.5 GHz 03 => 2.4 GHz 04 => 2.3 GHz 05 => 700MHz 06 => 3.7 GHz EE => Special Options 00 => External Antenna 01 => Vertical Antenna 02 => Horizontal Antenna |
| expedDevSoftware | 1.3.6.1.4.1.4743.1.1.2 | |||
| expedDevSwCurrentVers | 1.3.6.1.4.1.4743.1.1.2.1 | displaystring | read-only |
The software version currently operating in this device. |
| expedDevServer | 1.3.6.1.4.1.4743.1.1.3 | |||
| expedDevBootState | 1.3.6.1.4.1.4743.1.1.3.1 | integer | read-only |
If operational(1), the device has completed loading and processing of configuration parameters and the Base Station is operational. If airlinkdisabled(2) then the device was administratively disabled. If privatemode(3), the device is operational and is in privatemode. Enumeration: 'privatemode': 3, 'unknown': 4, 'airlinkdisabled': 2, 'operational': 1. |
| expedDevDhcp | 1.3.6.1.4.1.4743.1.1.3.2 | ipaddress | read-only |
The IP address of the DHCP server that assigned an IP address to this device. Returns 0.0.0.0 if DHCP was not used for IP address assignment. |
| expedDevFTPPort | 1.3.6.1.4.1.4743.1.1.3.3 | integer | read-write |
The port number that FTP is listening on. |
| expedDevFTPRemote | 1.3.6.1.4.1.4743.1.1.3.4 | ipaddress | read-write |
The IP address mask that is allowed access to FTP. 255.255.255.255 allows access to everyone. |
| expedDevFTPTimeout | 1.3.6.1.4.1.4743.1.1.3.5 | integer | read-write |
The max timeout in seconds to allow an FTP session to remain idle. |
| expedDevFTPState | 1.3.6.1.4.1.4743.1.1.3.6 | integer | read-write |
Enables/Disables FTP. Enumeration: 'enable': 1, 'disable': 2. |
| expedDevHostTraceAddress | 1.3.6.1.4.1.4743.1.1.3.7 | displaystring | read-write |
The MAC address of the host to trace for debugging host traffic. |
| expedDevHostTraceFilter | 1.3.6.1.4.1.4743.1.1.3.8 | integer | read-write |
This parameter allows a user to filter out host trace messages (i.e. discard them) for broadcast, or uplink or downlink frames. Enumeration: 'none': 1, 'downstream': 4, 'upstream': 3, 'broadcast-downstream': 6, 'broadcast': 2, 'broadcast-upstream': 5. |
| expedDevHostTraceState | 1.3.6.1.4.1.4743.1.1.3.9 | integer | read-write |
Enable/Disable individual host syslog tracing. Enumeration: 'enable': 1, 'disable': 2. |
| expedDevTelnetPort | 1.3.6.1.4.1.4743.1.1.3.10 | integer | read-write |
The port number that Telnet is listening on. |
| expedDevTelnetRemote | 1.3.6.1.4.1.4743.1.1.3.11 | ipaddress | read-write |
The IP address mask that is allowed access to Telnet. 255.255.255.255 allows access to everyone. |
| expedDevTelnetTimeout | 1.3.6.1.4.1.4743.1.1.3.12 | integer | read-write |
The max timeout in seconds to allow a Telnet session to remain idle. |
| expedDevTelnetState | 1.3.6.1.4.1.4743.1.1.3.13 | integer | read-write |
Enables/Disables Telnet. Enumeration: 'enable': 1, 'disable': 2. |
| expedDevWebPort | 1.3.6.1.4.1.4743.1.1.3.14 | integer | read-write |
The port number that WEB is listening on. This object is obsolete as of base station software version 4.3 and has no replacement. |
| expedDevWebRemote | 1.3.6.1.4.1.4743.1.1.3.15 | ipaddress | read-write |
The IP address mask that is allowed access to Web. 255.255.255.255 allows access to everyone. This object is obsolete as of base station software version 4.3 and has no replacement. |
| expedDevWebState | 1.3.6.1.4.1.4743.1.1.3.16 | integer | read-write |
Enables/Disables WEB. This object is obsolete as of base station software version 4.3 and has no replacement. Enumeration: 'enable': 1, 'disable': 2. |
| expedDevVTTimeout | 1.3.6.1.4.1.4743.1.1.3.17 | integer | read-write |
The max timeout in seconds to allow a Virtual Telnet session to wait for a reponse. This object is obsolete as of base station software version 4.3 and has no replacement. |
| expedDevSysSector | 1.3.6.1.4.1.4743.1.1.3.18 | displaystring | read-write |
The system sector. |
| expedDevSysCell | 1.3.6.1.4.1.4743.1.1.3.19 | displaystring | read-write |
The system cell. |
| expedDevVlanPortID | 1.3.6.1.4.1.4743.1.1.3.20 | integer | read-write |
The Ethernet Port VLAN ID. The PVID is the VLAN ID that is applied to any received frames on the Ethernet port that are not tagged with a VLAN ID. This parameter only takes effect following a reboot of the base station. Setting to 0 disables this feature. |
| expedDevVlanLegacyID | 1.3.6.1.4.1.4743.1.1.3.21 | integer | read-write |
The VLAN legacy ID. Selects the VLAN ID for all legacy CPEs that register with the base station. This parameter only takes effect following a reboot of the base station. A legacy CPE is defined as a CPE running 1.X code. Note that this VLAN ID is applied to all CPE's when AAA Authority is local. This object is obsolete as of base station software version 4.3 and is replaced by expedIfBssAAALocalVlan. |
| expedDevVlanMgmtID | 1.3.6.1.4.1.4743.1.1.3.22 | integer | read-write |
The VLAN Management ID. Selects the VLAN ID of the management VLAN, which is the VLAN used by the local IP stack of the base stations. This parameter only takes effect following a reboot of the base station. |
| expedDevVlanUntaggedID | 1.3.6.1.4.1.4743.1.1.3.23 | integer | read-write |
The VLAN Untagged ID. Configures the selected VLAN to transmit untagged frames (no 802.1Q tag). This parameter only takes effect following a reboot of the base station. Any Ethernet frames transmitted from the base station on this VLAN will be untagged. Setting to 0 disables this feature. |
| expedDevSysLocation | 1.3.6.1.4.1.4743.1.1.3.24 | displaystring | read-write |
The system location. |
| expedDevSysName | 1.3.6.1.4.1.4743.1.1.3.25 | displaystring | read-write |
The system name. |
| expedDevCpuUtilization | 1.3.6.1.4.1.4743.1.1.3.26 | integer | read-only |
The current base station CPU utilization, expressed as a percentage. |
| expedDevEvent | 1.3.6.1.4.1.4743.1.1.4 | |||
| expedDevEvSyslog | 1.3.6.1.4.1.4743.1.1.4.1 | ipaddress | read-write |
The IP address of the Syslog server. If 0.0.0.0, syslog transmission is inhibited. |
| expedDevEvSyslogState | 1.3.6.1.4.1.4743.1.1.4.2 | integer | read-write |
Enables/Disables Syslog. Enumeration: 'enable': 1, 'disable': 2. |
| expedDevEvControlTable | 1.3.6.1.4.1.4743.1.1.4.3 | no-access |
This table allows control of the reporting of event classes. For each event facility, the minimum level to send a syslog message and the minimum level to send a trap can be configured. |
|
| 1.3.6.1.4.1.4743.1.1.4.3.1 | no-access |
Allows configuration of the reporting mechanisms for a particular event priority. |
||
| expedDevEvFacility | 1.3.6.1.4.1.4743.1.1.4.3.1.1 | integer | read-only |
The Facility Level to control for sending traps and syslog messages. log-fac-cfginit is used to control traps and syslog messagesfor configuration and initialization, log-fac-airlink-mac is used to control traps and syslog messagesfor the airlink mac, log-fac-nnmgr is used to control traps and syslog messages for the the airlink manager, log-fac-relay is used to control traps and syslog messages for the the relay, log-fac-stack is used to control traps and syslog messages for the the ip stack, log-fac-aaa is used to control traps and syslog messages for the aaa server, log-fac-ether-mac is used to control traps and syslog messages for the ethernet driver Enumeration: 'log-fac-airlink-mac': 17, 'log-fac-nnmgr': 18, 'log-fac-aaa': 21, 'log-fac-stack': 20, 'log-fac-relay': 19, 'log-fac-cfginit': 16. |
| expedDevEvSyslogMin | 1.3.6.1.4.1.4743.1.1.4.3.1.2 | integer | read-write |
Defines the minimum level for sending a syslog message, all syslog messages at and above this level will be sent to the syslog server Enumeration: 'log-priority-notice': 5, 'log-priority-critical': 2, 'log-priority-debug': 7, 'log-priority-error': 3, 'log-priority-emergency': 0, 'log-priority-info': 6, 'log-priority-alert': 1, 'log-priority-warning': 4. |
| expedDevEvTrapMin | 1.3.6.1.4.1.4743.1.1.4.3.1.3 | integer | read-write |
Defines the minimum level for sending a syslog message, all syslog messages at and above this level will be sent to the SNMP manger as a trap Enumeration: 'log-priority-notice': 5, 'log-priority-critical': 2, 'log-priority-debug': 7, 'log-priority-error': 3, 'log-priority-emergency': 0, 'log-priority-info': 6, 'log-priority-alert': 1, 'log-priority-warning': 4. |
| expedDevFilter | 1.3.6.1.4.1.4743.1.1.5 | |||
| expedIfMibObjects | 1.3.6.1.4.1.4743.1.2 | |||
| expedIfBaseObjects | 1.3.6.1.4.1.4743.1.2.1 | |||
| expedIfAddress | 1.3.6.1.4.1.4743.1.2.1.1 | physaddress | read-only |
The Device airlink MAC address |
| expedIfChannelId | 1.3.6.1.4.1.4743.1.2.1.2 | integer | read-write |
The Base Station System identification of the channel within this particular MAC interface. If the interface is down, the object returns the most current value. If the channel ID is unknown, this object returns a value of 0. This object is obsolete as of base station software version 4.3 and is replaced by expedIfRadioFrequency. |
| expedIfChannelFrequency | 1.3.6.1.4.1.4743.1.2.1.3 | integer | read-only |
The center of the frequency associated with the channel in use, which is stored in expedIfChannelId. The unit of this object is KHz. This object is obsolete as of base station software version 4.3 and is replaced by expedIfRadioFrequency. |
| expedIfChannelWidth | 1.3.6.1.4.1.4743.1.2.1.4 | integer | read-only |
The width of the channel in use, which is stored in expedIfChannelId. Most implementations are expected to support a channel width of 6 MHz (North America) and/or 8 MHz (Europe). The unit of this object is KHz. This object is obsolete as of base station software version 4.3 and is replaced by expedIfRadioFrequency. |
| expedIfTXAGC | 1.3.6.1.4.1.4743.1.2.1.5 | integer | read-only |
This specifies the automatic gain control (AGC) applied to the transmitter, for setting the maximum power output of the transmitter. This object is obsolete as of base station software version 4.3 and has no replacement. |
| expedIfAirlinkState | 1.3.6.1.4.1.4743.1.2.1.6 | integer | read-write |
This enables and disables the airlink Enumeration: 'enable': 1, 'disable': 2. |
| expedIfRXAGC | 1.3.6.1.4.1.4743.1.2.1.7 | integer | read-only |
This specifies the the automatic gain control applied to the receiver. This object is obsolete as of base station software version 4.3 and has no replacement. |
| expedIfAirlinkTiming | 1.3.6.1.4.1.4743.1.2.1.9 | integer | read-write |
This selects the source for the one pulse-per-second. The source will either be external, meaning a GPS source, internal, or external pulse-per-second generated without a GPS unit. The time synchronization signal is needed to ascertain the proper timing for TDD (Time Division Duplexing). Enumeration: 'external-no-GPS': 3, 'internal': 2, 'external': 1. |
| expedIfAirlinkColorCode | 1.3.6.1.4.1.4743.1.2.1.10 | integer | read-write |
This sets the home color code for this base station. The color code is broadcasted to all CPE's. |
| expedIfAirlinkExtRange | 1.3.6.1.4.1.4743.1.2.1.11 | integer | read-write |
This sets the maximum cell size that is broadcasted to all CPE's. Each step indicates a 5 mile radius cell size. CPE's outside the advertised cell size will not try to register with this base. |
| expedIfBaseRegNotPref | 1.3.6.1.4.1.4743.1.2.1.12 | integer | read-write |
Controls registration for this base. If set to True then this Base is advertising to other CPE's that it is busy and should try other bases first. This object is obsolete as of base station software version 4.3 and has no replacement. Enumeration: 'enable': 1, 'disable': 2. |
| expedIfBssDownChannelPower | 1.3.6.1.4.1.4743.1.2.1.13 | tenthdbmv | read-write |
The Base Station System operational transmit power. The range is 6 to 31 for 2 watts base, 10 to 31 for 2 watts base and 16 to 31 for 0.5 watts base. If the interface is down, this object either returns the configured value, the most current value or the value of 0. |
| expedIfBssDownlinkBias | 1.3.6.1.4.1.4743.1.2.1.14 | integer | read-write |
The Base Station System Downlink Bias. This Bias sets up the number of uplink and downlink slots. |
| expedIfBssDownSlots | 1.3.6.1.4.1.4743.1.2.1.15 | integer | read-only |
Directs the Base Station to transmit this number of down link symbols in each frame. Note that this number must be related to the number of up link symbols as follows: (Down Link Symbols) = (Up Link Symbols) + (Down Link Up Link Bias) * 4. |
| expedIfBssUpSlots | 1.3.6.1.4.1.4743.1.2.1.16 | integer | read-only |
Directs the Base Station to expect this number of up link symbols in each frame. This is the number of down link symbols that will contain an UCS field. A CPE determines the existence of an up link symbol slot by detecting this UCS. This is a system wide configuration number and is used by the CPEs to facilitate frame synchronization. This number is to be a multiple of three (0,3,6,x). If this number is 0 then the system will be set up for continuous down link operation, allowing no up link operation. |
| expedIfAirlinkPowerControl | 1.3.6.1.4.1.4743.1.2.1.17 | integer | read-only |
Enables and disables the airlink power control task. This task when enabled will shut the airlink down when power goes below a pre-determined power level or goes above a pre-determined power level. Enumeration: 'enable': 1, 'disable': 2. |
| expedIfUplinkSlotUsageTable | 1.3.6.1.4.1.4743.1.2.1.18 | no-access |
At the CPE, describes the PHY signal quality of downstream channels. At the BSS, describes the PHY signal quality of upstream channels. |
|
| 1.3.6.1.4.1.4743.1.2.1.18.1 | no-access |
Status information for an uplink slot. |
||
| expedIfUplinkSlotUsageIndex | 1.3.6.1.4.1.4743.1.2.1.18.1.1 | integer | read-only |
Index value to uniquely identify an entry in this table, on a per-slot basis. |
| expedIfUplinkSlotUsageUseCount | 1.3.6.1.4.1.4743.1.2.1.18.1.2 | counter | read-only |
Number of good symbols in slot. |
| expedIfUplinkSlotUsageFreeCount | 1.3.6.1.4.1.4743.1.2.1.18.1.3 | counter | read-only |
Number of free slots. |
| expedIfUplinkSlotUsageRetryCount | 1.3.6.1.4.1.4743.1.2.1.18.1.4 | counter | read-only |
Number of symbols that had to be retried. |
| expedIfUplinkSlotUsageBytesRecvd | 1.3.6.1.4.1.4743.1.2.1.18.1.5 | counter | read-only |
Number of bytes in the received messages. |
| expedIfUplinkSlotUsageMsgsRecvd | 1.3.6.1.4.1.4743.1.2.1.18.1.6 | counter | read-only |
Number of received messages. |
| expedIfUplinkSlotTotUseCount | 1.3.6.1.4.1.4743.1.2.1.19 | counter | read-only |
Number of good symbols in all 6 slots combined. |
| expedIfUplinkSlotTotFreeCount | 1.3.6.1.4.1.4743.1.2.1.20 | counter | read-only |
Number of free slots in all 6 slots combined. |
| expedIfUplinkSlotTotRetryCount | 1.3.6.1.4.1.4743.1.2.1.21 | counter | read-only |
Number of symbols that had to be retried in all 6 slots combined. |
| expedIfUplinkSlotTotBytesRecvd | 1.3.6.1.4.1.4743.1.2.1.22 | counter | read-only |
Number of bytes in the received messages in all 6 slots combined. |
| expedIfUplinkSlotTotMsgsRecvd | 1.3.6.1.4.1.4743.1.2.1.23 | counter | read-only |
Number of received messages in all 6 slots combined. |
| expedIfDownlinkBytes | 1.3.6.1.4.1.4743.1.2.1.24 | counter | read-only |
Number of bytes on the downlink. |
| expedIfDownlinkSymbolsUsed | 1.3.6.1.4.1.4743.1.2.1.25 | counter | read-only |
Number of symbols used on the downlink. |
| expedIfDownlinkSymbolsFree | 1.3.6.1.4.1.4743.1.2.1.26 | counter | read-only |
Number of symbols free on the downlink. |
| expedIfDownlinkMsgsUnicast | 1.3.6.1.4.1.4743.1.2.1.27 | counter | read-only |
Number of messages on the downlink that are unicast. |
| expedIfDownlinkMsgsNUnicast | 1.3.6.1.4.1.4743.1.2.1.28 | counter | read-only |
Number of messages on the downlink that are broadcast. |
| expedIfDownlinkSaturation | 1.3.6.1.4.1.4743.1.2.1.29 | integer | read-only |
Percent of slot usage on the downlink. |
| expedIfUplinkSaturation | 1.3.6.1.4.1.4743.1.2.1.30 | integer | read-only |
Percent of saturation on the uplink. |
| expedIfMaxModLevel | 1.3.6.1.4.1.4743.1.2.1.31 | integer | read-write |
Maximum modulation level for base. The acceptable values are 0 (QPSK), 1 (16 QAM), 2 (64 QAM) and 5 (16 QAM Lite). |
| expedIfMaxModLevelString | 1.3.6.1.4.1.4743.1.2.1.32 | displaystring | read-only |
Maximum modulation level for base in string format. |
| expedIfSoftRssi | 1.3.6.1.4.1.4743.1.2.1.33 | integer | read-write |
This setting represents a transmit limit on the registered CPEs. A CPE will reduce its transmit power if its downlink RSSI is greater than this value. Transmit power will be reduced by the difference between the downlink RSSI and this value. |
| expedIfRadioFrequency | 1.3.6.1.4.1.4743.1.2.1.34 | displaystring | read-write |
This object represents the configured frequency and bandwidth for the Airlink tranceiver in the target base station device. The format of this string is |
| expedIfBssDownChannelPowerLimit | 1.3.6.1.4.1.4743.1.2.1.35 | tenthdbmv | read-only |
The minimum limit of the Base Station System operational transmit power. The value is 16 for 0.5 watts base, 10 for 2 watts base, and 6 for 5 watts base. |
| expedIfMaxModLevelLimit | 1.3.6.1.4.1.4743.1.2.1.36 | integer | read-only |
The limit of the maximum modulation level for base. The acceptable values are 0 (QPSK), 1 (16 QAM), 2 (64 QAM) and 5 (16 QAM Lite). |
| expedIfMaxNumOfCPEs | 1.3.6.1.4.1.4743.1.2.1.37 | integer | read-write |
Maximum cpes supported by the base DB. |
| expedIfMaxNumOfCPEsLimit | 1.3.6.1.4.1.4743.1.2.1.38 | integer | read-only |
The limit of the maximum cpes supported by the base DB. |
| expedIfMaxNumOfHosts | 1.3.6.1.4.1.4743.1.2.1.39 | integer | read-write |
Maximum hosts supported by the base DB. |
| expedIfBssObjects | 1.3.6.1.4.1.4743.1.2.2 | |||
| expedIfBssCapabilities | 1.3.6.1.4.1.4743.1.2.2.1 | integer | read-only |
Identifies the capabilities of the BSS MAC implementation at this interface. Note that packet transmission is always supported. Therefore, there is no specific bit required to explicitely indicate this capability. Enumeration: 'voiceCells-atmCells-concat': 5, 'voiceCells': 2, 'packet': 0, 'atmCells': 1, 'voiceCells-atmCells': 4, 'concatenation-voiceCells': 3. |
| expedIfBssNumOfCPEs | 1.3.6.1.4.1.4743.1.2.2.2 | integer | read-only |
Number of CPE's currently registered on the Base station |
| expedIfBssNumOfHosts | 1.3.6.1.4.1.4743.1.2.2.3 | integer | read-only |
Number of Hosts currently registered on the Base station |
| expedIfBssNumOfCPEsHighMark | 1.3.6.1.4.1.4743.1.2.2.4 | counter | read-only |
Highest Number of CPE's that were registered on the Base station |
| expedIfBssNumOfHostsHighMark | 1.3.6.1.4.1.4743.1.2.2.5 | counter | read-only |
Highest Number of Hosts that were registered on the Base station |
| expedIfBssRelayCpeIdleTime | 1.3.6.1.4.1.4743.1.2.2.6 | integer | read-write |
The amount of time in seconds that the CPE can be idle before it is deleted from the base station. Idle time is defined as no uplink traffic from the CPE. |
| expedIfBssRelayDHCPTimeout | 1.3.6.1.4.1.4743.1.2.2.7 | integer | read-write |
The amount of time in seconds waiting for completion of the DHCP conversation. |
| expedIfBssRelayMaxTransit | 1.3.6.1.4.1.4743.1.2.2.8 | integer | read-write |
The max amount of time in 10ths of a second a datagram frame can live within the device before it is considered stale and is deleted. |
| expedIfBssAAAState | 1.3.6.1.4.1.4743.1.2.2.9 | integer | read-write |
Enables/Disables AAA Server. Enumeration: 'enable': 1, 'disable': 2. |
| expedIfBssAAAConnectionTime | 1.3.6.1.4.1.4743.1.2.2.10 | displaystring | read-only |
Date and Time of the current AAA connection. |
| expedIfBssAAAConnectionAttempts | 1.3.6.1.4.1.4743.1.2.2.11 | counter | read-only |
Number of attempts for the current AAA connection. |
| expedIfBssAAAConfigConnection | 1.3.6.1.4.1.4743.1.2.2.12 | displaystring | read-write |
The configuration parameter that controls the address of the AAA server(s). This can be one or two IP addresses, separated by a space or comma, to specify a primary and a backup AAA server. expedIfBssAAACurrentConnection shows the IP address currently being used. |
| expedIfBssAAACurrentConnection | 1.3.6.1.4.1.4743.1.2.2.13 | ipaddress | read-only |
IP address of the current AAA connection. |
| expedIfBssAAAAuthority | 1.3.6.1.4.1.4743.1.2.2.14 | integer | read-write |
The Authority can be either local or remote. Local uses local authority parameters defined in ExpedIfBssLocalConfig for CPE permissions. Remote looks for authority from a Remote AAA Server for CPE permissions. Enumeration: 'remote': 2, 'local': 1. |
| expedIfBssAAACaching | 1.3.6.1.4.1.4743.1.2.2.15 | integer | read-write |
Enables/Disables aaa caching during remote authority. When enabled if the cpe is known by the base then the base will act as a cache and give authorization based on the last registration. This object is obsolete as of base station software version 4.3 and has no replacement. Enumeration: 'enable': 1, 'disable': 2. |
| expedIfBssAAAPort | 1.3.6.1.4.1.4743.1.2.2.16 | integer | read-write |
The Port the AAA Server is listening on. |
| expedIfBssAAARegRequests | 1.3.6.1.4.1.4743.1.2.2.17 | counter | read-only |
Number of CPE registration requests received over the air. |
| expedIfBssAAARegDenys | 1.3.6.1.4.1.4743.1.2.2.18 | counter | read-only |
Number of permission vectors that indicate a deny for a CPE registration. |
| expedIfBssAAARegConfirms | 1.3.6.1.4.1.4743.1.2.2.19 | counter | read-only |
Number of permission vectors that indicate a confirm for a CPE registration. |
| expedIfBssAAARegCache | 1.3.6.1.4.1.4743.1.2.2.20 | counter | read-only |
Number of registration confirms due to caching. This object is obsolete as of base station software version 4.3 and has no replacement. |
| expedIfBssAAARegDuplicates | 1.3.6.1.4.1.4743.1.2.2.21 | counter | read-only |
Number of registration requests that are duplicates of a current registration request. Indicates that a second registration was received for a given CPE before the permission vector was received from the AAA server. |
| expedIfBssAAANoAAAResponse | 1.3.6.1.4.1.4743.1.2.2.22 | counter | read-only |
Number of registration requests that never received a permission vector from the AAA server. |
| expedIfBssAAACDRsSent | 1.3.6.1.4.1.4743.1.2.2.23 | counter | read-only |
Number of CDR's sent to the AAA server. |
| expedIfBssAAAPVsRecv | 1.3.6.1.4.1.4743.1.2.2.24 | counter | read-only |
Number of PV's received from the AAA server. |
| expedIfBssAAAUnexpectedPV | 1.3.6.1.4.1.4743.1.2.2.25 | counter | read-only |
Number of PV's received from the AAA server, that were not expected. |
| expedIfBssCpeStatusTable | 1.3.6.1.4.1.4743.1.2.2.26 | no-access |
A set of objects in the BSS, maintained for each CPE connected to this base station. |
|
| 1.3.6.1.4.1.4743.1.2.2.26.1 | no-access |
Status information for a single CPE. An entry in this table exists for each CPE that is connected to the BSS implementing this table. |
||
| expedIfBssCpeStatusIndex | 1.3.6.1.4.1.4743.1.2.2.26.1.1 | integer | read-only |
Index value to uniquely identify an entry in this table. For an individual CPE, this index value should not change during BSS uptime. |
| expedIfBssCpeStatusMacAddress | 1.3.6.1.4.1.4743.1.2.2.26.1.2 | displaystring | read-only |
MAC address of this CPE. If the CPE has multiple MAC addresses, this is the MAC address associated with the Airlink interface. |
| expedIfBssCpeStatusBytesFrom | 1.3.6.1.4.1.4743.1.2.2.26.1.3 | counter | read-only |
Number of bytes in from this CPE. |
| expedIfBssCpeStatusBytesTo | 1.3.6.1.4.1.4743.1.2.2.26.1.4 | counter | read-only |
Number of bytes out to this CPE. |
| expedIfBssCpeStatusMsgsFrom | 1.3.6.1.4.1.4743.1.2.2.26.1.5 | counter | read-only |
Number of Msgs in from this CPE. |
| expedIfBssCpeStatusMsgsTo | 1.3.6.1.4.1.4743.1.2.2.26.1.6 | counter | read-only |
Number of Msgs out to this CPE. |
| expedIfBssCpeNumOfHosts | 1.3.6.1.4.1.4743.1.2.2.26.1.7 | integer | read-only |
Number of hosts allowed for this CPE. |
| expedIfBssCpeISPId | 1.3.6.1.4.1.4743.1.2.2.26.1.8 | integer | read-only |
This contains the ID of the ISP that owns this CPE . |
| expedIfBssCpeVID | 1.3.6.1.4.1.4743.1.2.2.26.1.9 | integer | read-only |
This contains the VLAN ID the CPE has been assigned to. |
| expedIfBssCpeStatusLastTime | 1.3.6.1.4.1.4743.1.2.2.26.1.10 | dateandtime | read-only |
The date and time last heard from this CPE. |
| expedIfBssDynamicIPAssignment | 1.3.6.1.4.1.4743.1.2.2.26.1.11 | truthvalue | read-only |
A true indicates that hosts behind this CPE acquire their IP Address via DHCP. False indicates static IP assignment. This object is obsolete. |
| expedIfBssCpeSwVersion | 1.3.6.1.4.1.4743.1.2.2.26.1.12 | displaystring | read-only |
Version of software this CPE is running. |
| expedIfBssCpeNumOfCalls | 1.3.6.1.4.1.4743.1.2.2.26.1.13 | integer | read-only |
Number Of Current Calls on this CPE |
| expedIfBssCpeDataPolls | 1.3.6.1.4.1.4743.1.2.2.26.1.14 | counter | read-only |
Number Of Data Polls from this CPE |
| expedIfBssCpeDryPolls | 1.3.6.1.4.1.4743.1.2.2.26.1.15 | counter | read-only |
Number Of Dry Polls from this CPE |
| expedIfBssCpeNoResponse | 1.3.6.1.4.1.4743.1.2.2.26.1.16 | counter | read-only |
Number Of No Response to Polls from this CPE |
| expedIfBssCpeCallEfficiency | 1.3.6.1.4.1.4743.1.2.2.26.1.17 | integer | read-only |
Efficiency use of the Bandwidth for this CPE |
| expedIfBssCpeBWUsage | 1.3.6.1.4.1.4743.1.2.2.26.1.18 | integer | read-only |
Sync Session Bandwidth Usage for all calls on this CPE from the perspective of base |
| expedIfBssCpeDownModulation | 1.3.6.1.4.1.4743.1.2.2.26.1.19 | displaystring | read-only |
Downlink Modulation Level |
| expedIfBssCpeDownLinkBandWidth | 1.3.6.1.4.1.4743.1.2.2.26.1.20 | displaystring | read-only |
Provisioned Downlink BandWidth limit. Unit is kbps. 'none' means no limit. |
| expedIfBssCpeUplinkBandWidth | 1.3.6.1.4.1.4743.1.2.2.26.1.21 | displaystring | read-only |
Provisioned Uplink BandWidth limit. Unit is kbps. 'none' means no limit. |
| expedIfBssCpeIdleTime | 1.3.6.1.4.1.4743.1.2.2.26.1.22 | counter | read-only |
Amount of time the CPE has been idle |
| expedIfBssCpeModelId | 1.3.6.1.4.1.4743.1.2.2.26.1.23 | displaystring | read-only |
Model Identifier for the subscriber unit. The primary hardware features of the subscriber unit are specified by this string representation of a hexidecimal, 32-bit number with a range of 00000000 - FFFFFFFF and a format of ABCCDDEE. A => Model Category 0 => Outdoor Base Station 1 => Indoor CPE 2 => Outdoor CPE 3 => Indoor Base Station 4 => Mobile Subscriber Unit B => Reserved 0 => Default CC => Board Type 01 => FPGA Wedge 02 => Dual Board ASIC Wedge, Davicom 03 => Single Board ASIC Wedge, SMSC, Indoor 04 => Single Board ASIC, SMSC, Outdoor 05 => Slimline, ASIC 12 => AMOD Dual Board, ASIC 15 => AMOD Slimline, ASIC 16 => AMOD 5407 Coldfire, ASIC 17 => AMOD LX CPE 18 => AMOD LX SoC CPE 22 => AMOD 5484 Coldfire, ASIC Base DD => Reserved 00 => 2.6 GHz 01 => 3.3 GHz 02 => 3.5 GHz 03 => 2.4 GHz 04 => 2.3 GHz 05 => 700MHz 06 => 3.7 GHz EE => Special Options 00 => External Antenna 01 => Vertical Antenna 02 => Horizontal Antenna |
| expedIfBssNumStaticHosts | 1.3.6.1.4.1.4743.1.2.2.26.1.24 | integer | read-only |
Number of static hosts allowed for this CPE. |
| expedIfBssCpeHostTable | 1.3.6.1.4.1.4743.1.2.2.27 | no-access |
A set of objects in the BSS, maintained for each Host/CPE connected to this base station. |
|
| 1.3.6.1.4.1.4743.1.2.2.27.1 | no-access |
Host information for a single CPE. An entry in this table exists for each CPE/Host that is connected to the BSS implementing this table. |
||
| expedIfBssCpeHostIndex | 1.3.6.1.4.1.4743.1.2.2.27.1.1 | integer | read-only |
Index value to uniquely identify an entry in this table. |
| expedIfBssCpeHostMacAddress | 1.3.6.1.4.1.4743.1.2.2.27.1.2 | displaystring | read-only |
MAC address of this CPE/Host. |
| expedIfBssCpeAirlinkMacAddress | 1.3.6.1.4.1.4743.1.2.2.27.1.3 | displaystring | read-only |
Airlink MAC address of this CPE. |
| expedIfBssCpeHostIpAddress | 1.3.6.1.4.1.4743.1.2.2.27.1.4 | ipaddress | read-only |
IP address of this Host. |
| expedIfBssCpeHostIpType | 1.3.6.1.4.1.4743.1.2.2.27.1.5 | displaystring | read-only |
Indicates the type of host. Either dynamic, static or bound CPE Host. |
| expedIfBssCpeHostPPPOE | 1.3.6.1.4.1.4743.1.2.2.27.1.6 | displaystring | read-only |
Indicates status of any PPOE sessions. |
| expedIfBssCpeHostVLANID | 1.3.6.1.4.1.4743.1.2.2.27.1.7 | integer | read-only |
Indicates VLAN ID the Host is on |
| expedIfBssVlanTable | 1.3.6.1.4.1.4743.1.2.2.28 | no-access |
A set of objects in the BSS, maintained for each CPE connected to this base station. |
|
| 1.3.6.1.4.1.4743.1.2.2.28.1 | no-access |
Stats information for a single VLAN ID. An entry in this table exists for each VLAN. |
||
| expedIfBssVlanIndex | 1.3.6.1.4.1.4743.1.2.2.28.1.1 | integer | read-only |
Index value to uniquely identify an entry in this table. For an individual VLAN, this index value should not change during BSS uptime. |
| expedIfBssVlanNumOfCpes | 1.3.6.1.4.1.4743.1.2.2.28.1.2 | integer | read-only |
Number of CPEs on this VLAN |
| expedIfBssVlanUpBytes | 1.3.6.1.4.1.4743.1.2.2.28.1.3 | counter | read-only |
Number of uplink bytes for this VLAN. |
| expedIfBssVlanUpUnicastPkts | 1.3.6.1.4.1.4743.1.2.2.28.1.4 | counter | read-only |
Number of uplink unicast packets for this VLAN. |
| expedIfBssVlanUpNUnicastPkts | 1.3.6.1.4.1.4743.1.2.2.28.1.5 | counter | read-only |
Number of uplink broadcast packets for this VLAN. |
| expedIfBssVlanDnBytes | 1.3.6.1.4.1.4743.1.2.2.28.1.6 | counter | read-only |
Number of downlink bytes for this VLAN. |
| expedIfBssVlanDnUnicastPkts | 1.3.6.1.4.1.4743.1.2.2.28.1.7 | counter | read-only |
Number of downlink unicast packets for this VLAN. |
| expedIfBssVlanDnNUnicastPkts | 1.3.6.1.4.1.4743.1.2.2.28.1.8 | counter | read-only |
Number of downlink broadcast packets for this VLAN. |
| expedIfBssVlanNumOfHosts | 1.3.6.1.4.1.4743.1.2.2.28.1.9 | integer | read-only |
Number of hosts on this VLAN |
| expedIfBssCPERemoteStatsTable | 1.3.6.1.4.1.4743.1.2.2.29 | no-access |
Table of remote snmp stats gatherered over the air from each CPE. |
|
| 1.3.6.1.4.1.4743.1.2.2.29.1 | no-access |
Table of remote snmp stats gatherered over the air from each CPE. |
||
| expedIfBssRemoteCPEIndex | 1.3.6.1.4.1.4743.1.2.2.29.1.1 | integer | read-only |
Index value to uniquely identify an entry in this table. For an individual CPE, this index value should not change during BSS uptime. |
| expedIfBssRemoteCPEMacAddress | 1.3.6.1.4.1.4743.1.2.2.29.1.2 | displaystring | read-only |
Mac Address of the CPE being remotely monitored. |
| expedIfBssRemoteCPEPollSuccess | 1.3.6.1.4.1.4743.1.2.2.29.1.3 | truthvalue | read-only |
Indicates the success of the last poll. True indicates a succes, False indicates SNMP was not able to get stats from the CPE. |
| expedIfBssRemoteSlot1_Success | 1.3.6.1.4.1.4743.1.2.2.29.1.4 | counter | read-only |
Number of messages successful on slot. |
| expedIfBssRemoteSlot1_NoAccess | 1.3.6.1.4.1.4743.1.2.2.29.1.5 | counter | read-only |
Number of message send failures due to uplink slot acquisition failure on slot. |
| expedIfBssRemoteSlot1_Failed | 1.3.6.1.4.1.4743.1.2.2.29.1.6 | counter | read-only |
Number of message send failures due to loss of uplink slot. |
| expedIfBssRemoteSlot2_Success | 1.3.6.1.4.1.4743.1.2.2.29.1.7 | counter | read-only |
Number of messages successful on slot. |
| expedIfBssRemoteSlot2_NoAccess | 1.3.6.1.4.1.4743.1.2.2.29.1.8 | counter | read-only |
Number of message send failures due to uplink slot acquisition failure on slot. |
| expedIfBssRemoteSlot2_Failed | 1.3.6.1.4.1.4743.1.2.2.29.1.9 | counter | read-only |
Number of message send failures due to loss of uplink slot. |
| expedIfBssRemoteSlot3_Success | 1.3.6.1.4.1.4743.1.2.2.29.1.10 | counter | read-only |
Number of messages successful on slot. |
| expedIfBssRemoteSlot3_NoAccess | 1.3.6.1.4.1.4743.1.2.2.29.1.11 | counter | read-only |
Number of message send failures due to uplink slot acquisition failure on slot. |
| expedIfBssRemoteSlot3_Failed | 1.3.6.1.4.1.4743.1.2.2.29.1.12 | counter | read-only |
Number of message send failures due to loss of uplink slot. |
| expedIfBssRemoteSlot4_Success | 1.3.6.1.4.1.4743.1.2.2.29.1.13 | counter | read-only |
Number of messages successful on slot |
| expedIfBssRemoteSlot4_NoAccess | 1.3.6.1.4.1.4743.1.2.2.29.1.14 | counter | read-only |
Number of message send failures due to uplink slot acquisition failure on slot. |
| expedIfBssRemoteSlot4_Failed | 1.3.6.1.4.1.4743.1.2.2.29.1.15 | counter | read-only |
Number of message send failures due to loss of uplink slot. |
| expedIfBssRemoteSlot5_Success | 1.3.6.1.4.1.4743.1.2.2.29.1.16 | counter | read-only |
Number of messages successful on slot |
| expedIfBssRemoteSlot5_NoAccess | 1.3.6.1.4.1.4743.1.2.2.29.1.17 | counter | read-only |
Number of message send failures due to uplink slot acquisition failure on slot. |
| expedIfBssRemoteSlot5_Failed | 1.3.6.1.4.1.4743.1.2.2.29.1.18 | counter | read-only |
Number of message send failures due to loss of uplink slot. |
| expedIfBssRemoteSlot6_Success | 1.3.6.1.4.1.4743.1.2.2.29.1.19 | counter | read-only |
Number of messages successful on slot. |
| expedIfBssRemoteSlot6_NoAccess | 1.3.6.1.4.1.4743.1.2.2.29.1.20 | counter | read-only |
Number of message send failures due to uplink slot acquisition failure on slot. |
| expedIfBssRemoteSlot6_Failed | 1.3.6.1.4.1.4743.1.2.2.29.1.21 | counter | read-only |
Number of message send failures due to loss of uplink slot. |
| expedIfBssRemoteSlot1_ACK | 1.3.6.1.4.1.4743.1.2.2.29.1.22 | counter | read-only |
Number of successful symbol transmissions. |
| expedIfBssRemoteSlot1_NACK | 1.3.6.1.4.1.4743.1.2.2.29.1.23 | counter | read-only |
Number of symbol retries. |
| expedIfBssRemoteSlot1_Busy | 1.3.6.1.4.1.4743.1.2.2.29.1.24 | counter | read-only |
Number of slot acquisition backoff due to slot busy. |
| expedIfBssRemoteSlot1_Free | 1.3.6.1.4.1.4743.1.2.2.29.1.25 | counter | read-only |
Number of slot acquisition failures. |
| expedIfBssRemoteSlot1_Lost | 1.3.6.1.4.1.4743.1.2.2.29.1.26 | counter | read-only |
Number of slot failures due to lost contention. |
| expedIfBssRemoteSlot1_Attempt | 1.3.6.1.4.1.4743.1.2.2.29.1.27 | counter | read-only |
Number of slot acquisitions. |
| expedIfBssRemoteSlot2_ACK | 1.3.6.1.4.1.4743.1.2.2.29.1.28 | counter | read-only |
Number of successful symbol transmissions. |
| expedIfBssRemoteSlot2_NACK | 1.3.6.1.4.1.4743.1.2.2.29.1.29 | counter | read-only |
Number of symbol retries. |
| expedIfBssRemoteSlot2_Busy | 1.3.6.1.4.1.4743.1.2.2.29.1.30 | counter | read-only |
Number of slot acquisition backoff due to slot busy. |
| expedIfBssRemoteSlot2_Free | 1.3.6.1.4.1.4743.1.2.2.29.1.31 | counter | read-only |
Number of slot acquisition failures. |
| expedIfBssRemoteSlot2_Lost | 1.3.6.1.4.1.4743.1.2.2.29.1.32 | counter | read-only |
Number of slot failures due to lost contention. |
| expedIfBssRemoteSlot2_Attempt | 1.3.6.1.4.1.4743.1.2.2.29.1.33 | counter | read-only |
Number of slot acquisitions. |
| expedIfBssRemoteSlot3_ACK | 1.3.6.1.4.1.4743.1.2.2.29.1.34 | counter | read-only |
Number of successful symbol transmissions. |
| expedIfBssRemoteSlot3_NACK | 1.3.6.1.4.1.4743.1.2.2.29.1.35 | counter | read-only |
Number of symbol retries. |
| expedIfBssRemoteSlot3_Busy | 1.3.6.1.4.1.4743.1.2.2.29.1.36 | counter | read-only |
Number of slot acquisition backoff due to slot busy. |
| expedIfBssRemoteSlot3_Free | 1.3.6.1.4.1.4743.1.2.2.29.1.37 | counter | read-only |
Number of slot acquisition failures. |
| expedIfBssRemoteSlot3_Lost | 1.3.6.1.4.1.4743.1.2.2.29.1.38 | counter | read-only |
Number of slot failures due to lost contention. |
| expedIfBssRemoteSlot3_Attempt | 1.3.6.1.4.1.4743.1.2.2.29.1.39 | counter | read-only |
Number of slot acquisitions. |
| expedIfBssRemoteSlot4_ACK | 1.3.6.1.4.1.4743.1.2.2.29.1.40 | counter | read-only |
Number of successful symbol transmissions. |
| expedIfBssRemoteSlot4_NACK | 1.3.6.1.4.1.4743.1.2.2.29.1.41 | counter | read-only |
Number of symbol retries. |
| expedIfBssRemoteSlot4_Busy | 1.3.6.1.4.1.4743.1.2.2.29.1.42 | counter | read-only |
Number of slot acquisition backoff due to slot busy. |
| expedIfBssRemoteSlot4_Free | 1.3.6.1.4.1.4743.1.2.2.29.1.43 | counter | read-only |
Number of slot acquisition failures. |
| expedIfBssRemoteSlot4_Lost | 1.3.6.1.4.1.4743.1.2.2.29.1.44 | counter | read-only |
Number of slot failures due to lost contention. |
| expedIfBssRemoteSlot4_Attempt | 1.3.6.1.4.1.4743.1.2.2.29.1.45 | counter | read-only |
Number of slot acquisitions. |
| expedIfBssRemoteSlot5_ACK | 1.3.6.1.4.1.4743.1.2.2.29.1.46 | counter | read-only |
Number of successful symbol transmissions. |
| expedIfBssRemoteSlot5_NACK | 1.3.6.1.4.1.4743.1.2.2.29.1.47 | counter | read-only |
Number of symbol retries. |
| expedIfBssRemoteSlot5_Busy | 1.3.6.1.4.1.4743.1.2.2.29.1.48 | counter | read-only |
Number of slot acquisition backoff due to slot busy. |
| expedIfBssRemoteSlot5_Free | 1.3.6.1.4.1.4743.1.2.2.29.1.49 | counter | read-only |
Number of slot acquisition failures. |
| expedIfBssRemoteSlot5_Lost | 1.3.6.1.4.1.4743.1.2.2.29.1.50 | counter | read-only |
Number of slot failures due to lost contention. |
| expedIfBssRemoteSlot5_Attempt | 1.3.6.1.4.1.4743.1.2.2.29.1.51 | counter | read-only |
Number of slot acquisitions. |
| expedIfBssRemoteSlot6_ACK | 1.3.6.1.4.1.4743.1.2.2.29.1.52 | counter | read-only |
Number of successful symbol transmissions. |
| expedIfBssRemoteSlot6_NACK | 1.3.6.1.4.1.4743.1.2.2.29.1.53 | counter | read-only |
Number of symbol retries. |
| expedIfBssRemoteSlot6_Busy | 1.3.6.1.4.1.4743.1.2.2.29.1.54 | counter | read-only |
Number of slot acquisition backoff due to slot busy. |
| expedIfBssRemoteSlot6_Free | 1.3.6.1.4.1.4743.1.2.2.29.1.55 | counter | read-only |
Number of slot acquisition failures. |
| expedIfBssRemoteSlot6_Lost | 1.3.6.1.4.1.4743.1.2.2.29.1.56 | counter | read-only |
Number of slot failures due to lost contention. |
| expedIfBssRemoteSlot6_Attempt | 1.3.6.1.4.1.4743.1.2.2.29.1.57 | counter | read-only |
Number of slot acquisitions. |
| expedIfBssRemoteGoodSymbols | 1.3.6.1.4.1.4743.1.2.2.29.1.58 | counter | read-only |
Number of good symbols received by the CPE. |
| expedIfBssRemoteBadSymbols | 1.3.6.1.4.1.4743.1.2.2.29.1.59 | counter | read-only |
Number of bad symbols received by the CPE. |
| expedIfBssRemoteUnderFlows | 1.3.6.1.4.1.4743.1.2.2.29.1.60 | counter | read-only |
Number of times the signal processor was in an underflow condition. |
| expedIfBssRemoteOverFlows | 1.3.6.1.4.1.4743.1.2.2.29.1.61 | counter | read-only |
Number of times the signal processor was in an overflow condition. |
| expedIfBssRemoteSymbolCount | 1.3.6.1.4.1.4743.1.2.2.29.1.62 | counter | read-only |
Number of symbols evaluated to accumulate the score. |
| expedIfBssRemoteBadSymbolCount | 1.3.6.1.4.1.4743.1.2.2.29.1.63 | counter | read-only |
Number of bad symbols in the evaluation of the score. |
| expedIfBssRemoteBER | 1.3.6.1.4.1.4743.1.2.2.29.1.64 | integer | read-only |
Bit Error rate calculated during the score evaluation. |
| expedIfBssRemoteAvRSSI | 1.3.6.1.4.1.4743.1.2.2.29.1.65 | integer | read-only |
Average RSSI calculated during the score evaluation. |
| expedIfBssRemoteAvVT | 1.3.6.1.4.1.4743.1.2.2.29.1.66 | integer | read-only |
Average Viterbi calculated during the score evaluation. |
| expedIfBssRemoteAccumRS | 1.3.6.1.4.1.4743.1.2.2.29.1.67 | counter | read-only |
Reed Solomon errors calculated during the score evaluation. |
| expedIfBssRemoteScore | 1.3.6.1.4.1.4743.1.2.2.29.1.68 | counter | read-only |
Accumulated calculated score. |
| expedIfBssRemoteAirConnectTime | 1.3.6.1.4.1.4743.1.2.2.29.1.69 | displaystring | read-only |
Indicates how long the CPE has been connected to a base station. |
| expedIfBssRemoteDiscDownlink | 1.3.6.1.4.1.4743.1.2.2.29.1.70 | counter | read-only |
Number of disconnects due to a downlink failure. |
| expedIfBssRemoteDisconnectUpLink | 1.3.6.1.4.1.4743.1.2.2.29.1.71 | counter | read-only |
Number of disconnects due to a uplink failure. |
| expedIfBssRemoteHomeColorCode | 1.3.6.1.4.1.4743.1.2.2.29.1.72 | integer | read-only |
Indicates the home color code assigned to this CPE. |
| expedIfBssRemoteExtendedRange | 1.3.6.1.4.1.4743.1.2.2.29.1.73 | truthvalue | read-only |
Indicates whether the CPE is enabled for extended range or not. |
| expedIfBssRemoteRangingValue | 1.3.6.1.4.1.4743.1.2.2.29.1.74 | integer | read-only |
Indicates the maximum distance (range) the CPE will try to register at, before moving on to a different base. |
| expedIfBssRemoteTriggerValue | 1.3.6.1.4.1.4743.1.2.2.29.1.75 | integer | read-only |
The actual trigger value that the signal processor is programmed with. |
| expedIfBssRemoteCPEBaseObsCh1 | 1.3.6.1.4.1.4743.1.2.2.29.1.76 | integer | read-only |
Channel of the base station observed by the CPE in the base observation table. |
| expedIfBssRemoteCPEBaseObsMac1 | 1.3.6.1.4.1.4743.1.2.2.29.1.77 | displaystring | read-only |
Mac address of the base station observed by the CPE in the observation table. |
| expedIfBssRemoteCPEBaseObsCC1 | 1.3.6.1.4.1.4743.1.2.2.29.1.78 | integer | read-only |
Color code of the base station observed by the CPE in the observation table. |
| expedIfBssRemoteCPEBaseObsScore1 | 1.3.6.1.4.1.4743.1.2.2.29.1.79 | integer | read-only |
Score of the base station observed by the CPE in the observation table. |
| expedIfBssRemoteCPEBaseObsAuth1 | 1.3.6.1.4.1.4743.1.2.2.29.1.80 | truthvalue | read-only |
True indicates the CPE is authorized to use this base, False indicates that this CPE has been denied by this base. |
| expedIfBssRemoteCPEBaseObsBusy1 | 1.3.6.1.4.1.4743.1.2.2.29.1.81 | truthvalue | read-only |
True indicates this base observed is busy and is not recommending registrations to it. |
| expedIfBssRemoteCPEBaseObsRang1 | 1.3.6.1.4.1.4743.1.2.2.29.1.82 | truthvalue | read-only |
True indicates the CPE has completed extended ranging with this base station. |
| expedIfBssRemoteCPEBaseObsCh2 | 1.3.6.1.4.1.4743.1.2.2.29.1.83 | integer | read-only |
Channel of the base station observed by the CPE in the base observation table. |
| expedIfBssRemoteCPEBaseObsMac2 | 1.3.6.1.4.1.4743.1.2.2.29.1.84 | displaystring | read-only |
Mac address of the base station observed by the CPE in the observation table. |
| expedIfBssRemoteCPEBaseObsCC2 | 1.3.6.1.4.1.4743.1.2.2.29.1.85 | integer | read-only |
Color code of the base station observed by the CPE in the observation table. |
| expedIfBssRemoteCPEBaseObsScore2 | 1.3.6.1.4.1.4743.1.2.2.29.1.86 | integer | read-only |
Score of the base station observed by the CPE in the observation table. |
| expedIfBssRemoteCPEBaseObsAuth2 | 1.3.6.1.4.1.4743.1.2.2.29.1.87 | truthvalue | read-only |
True indicates the CPE is authorized to use this base, False indicates that this CPE has been denied by this base. |
| expedIfBssRemoteCPEBaseObsBusy2 | 1.3.6.1.4.1.4743.1.2.2.29.1.88 | truthvalue | read-only |
True indicates this base observed is busy and is not recommending registrations to it. |
| expedIfBssRemoteCPEBaseObsRang2 | 1.3.6.1.4.1.4743.1.2.2.29.1.89 | truthvalue | read-only |
True indicates the CPE has completed extended ranging with this base station. |
| expedIfBssRemoteCPEBaseObsCh3 | 1.3.6.1.4.1.4743.1.2.2.29.1.90 | integer | read-only |
Channel of the base station observed by the CPE in the base observation table. |
| expedIfBssRemoteCPEBaseObsMac3 | 1.3.6.1.4.1.4743.1.2.2.29.1.91 | displaystring | read-only |
Mac address of the base station observed by the CPE in the observation table. |
| expedIfBssRemoteCPEBaseObsCC3 | 1.3.6.1.4.1.4743.1.2.2.29.1.92 | integer | read-only |
Color code of the base station observed by the CPE in the observation table. |
| expedIfBssRemoteCPEBaseObsScore3 | 1.3.6.1.4.1.4743.1.2.2.29.1.93 | integer | read-only |
Score of the base station observed by the CPE in the observation table. |
| expedIfBssRemoteCPEBaseObsAuth3 | 1.3.6.1.4.1.4743.1.2.2.29.1.94 | truthvalue | read-only |
True indicates the CPE is authorized to use this base, False indicates that this CPE has been denied by this base. |
| expedIfBssRemoteCPEBaseObsBusy3 | 1.3.6.1.4.1.4743.1.2.2.29.1.95 | truthvalue | read-only |
True indicates this base observed is busy and is not recommending registrations to it. |
| expedIfBssRemoteCPEBaseObsRang3 | 1.3.6.1.4.1.4743.1.2.2.29.1.96 | truthvalue | read-only |
True indicates the CPE has completed extended ranging with this base station. |
| expedIfBssRemoteCPEBaseObsCh4 | 1.3.6.1.4.1.4743.1.2.2.29.1.97 | integer | read-only |
Channel of the base station observed by the CPE in the base observation table. |
| expedIfBssRemoteCPEBaseObsMac4 | 1.3.6.1.4.1.4743.1.2.2.29.1.98 | displaystring | read-only |
Mac address of the base station observed by the CPE in the observation table. |
| expedIfBssRemoteCPEBaseObsCC4 | 1.3.6.1.4.1.4743.1.2.2.29.1.99 | integer | read-only |
Color code of the base station observed by the CPE in the observation table. |
| expedIfBssRemoteCPEBaseObsScore4 | 1.3.6.1.4.1.4743.1.2.2.29.1.100 | integer | read-only |
Score of the base station observed by the CPE in the observation table. |
| expedIfBssRemoteCPEBaseObsAuth4 | 1.3.6.1.4.1.4743.1.2.2.29.1.101 | truthvalue | read-only |
True indicates the CPE is authorized to use this base, False indicates that this CPE has been denied by this base. |
| expedIfBssRemoteCPEBaseObsBusy4 | 1.3.6.1.4.1.4743.1.2.2.29.1.102 | truthvalue | read-only |
True indicates this base is observed busy and is not recommending registrations to it. |
| expedIfBssRemoteCPEBaseObsRang4 | 1.3.6.1.4.1.4743.1.2.2.29.1.103 | truthvalue | read-only |
True indicates the CPE has completed extended ranging with this base station. |
| expedIfBssRemoteCPEBaseObsCh5 | 1.3.6.1.4.1.4743.1.2.2.29.1.104 | integer | read-only |
Channel of the base station observed by the CPE in the base observation table. |
| expedIfBssRemoteCPEBaseObsMac5 | 1.3.6.1.4.1.4743.1.2.2.29.1.105 | displaystring | read-only |
Mac address of the base station observed by the CPE in the observation table. |
| expedIfBssRemoteCPEBaseObsCC5 | 1.3.6.1.4.1.4743.1.2.2.29.1.106 | integer | read-only |
Color code of the base station observed by the CPE in the observation table. |
| expedIfBssRemoteCPEBaseObsScore5 | 1.3.6.1.4.1.4743.1.2.2.29.1.107 | integer | read-only |
Score of the base station observed by the CPE in the observation table. |
| expedIfBssRemoteCPEBaseObsAuth5 | 1.3.6.1.4.1.4743.1.2.2.29.1.108 | truthvalue | read-only |
True indicates the CPE is authorized to use this base, False indicates that this CPE has been denied by this base. |
| expedIfBssRemoteCPEBaseObsBusy5 | 1.3.6.1.4.1.4743.1.2.2.29.1.109 | truthvalue | read-only |
True indicates this base observed is busy and is not recommending registrations to it. |
| expedIfBssRemoteCPEBaseObsRang5 | 1.3.6.1.4.1.4743.1.2.2.29.1.110 | truthvalue | read-only |
True indicates the CPE has completed extended ranging with this base station. |
| expedIfBssRemoteCPEBaseObsCh6 | 1.3.6.1.4.1.4743.1.2.2.29.1.111 | integer | read-only |
Channel of the base station observed by the CPE in the base observation table. |
| expedIfBssRemoteCPEBaseObsMac6 | 1.3.6.1.4.1.4743.1.2.2.29.1.112 | displaystring | read-only |
Mac address of the base station observed by the CPE in the observation table. |
| expedIfBssRemoteCPEBaseObsCC6 | 1.3.6.1.4.1.4743.1.2.2.29.1.113 | integer | read-only |
Color code of the base station observed by the CPE in the observation table. |
| expedIfBssRemoteCPEBaseObsScore6 | 1.3.6.1.4.1.4743.1.2.2.29.1.114 | integer | read-only |
Score of the base station observed by the CPE in the observation table. |
| expedIfBssRemoteCPEBaseObsAuth6 | 1.3.6.1.4.1.4743.1.2.2.29.1.115 | truthvalue | read-only |
True indicates the CPE is authorized to use this base, False indicates that this CPE has been denied by this base. |
| expedIfBssRemoteCPEBaseObsBusy6 | 1.3.6.1.4.1.4743.1.2.2.29.1.116 | truthvalue | read-only |
True indicates this base observed is busy and is not recommending registrations to it. |
| expedIfBssRemoteCPEBaseObsRang6 | 1.3.6.1.4.1.4743.1.2.2.29.1.117 | truthvalue | read-only |
True indicates the CPE has completed extended ranging with this base station. |
| expedIfBssRemoteCPENumActCalls | 1.3.6.1.4.1.4743.1.2.2.29.1.118 | integer | read-only |
Number of active calls on the CPE. |
| expedIfBssRemoteCPEDataPolls | 1.3.6.1.4.1.4743.1.2.2.29.1.119 | counter | read-only |
Number Of Data Polls for this CPE |
| expedIfBssRemoteCPEDryPolls | 1.3.6.1.4.1.4743.1.2.2.29.1.120 | counter | read-only |
Number Of Dry Polls for this CPE |
| expedIfBssRemoteCPEUnexpected | 1.3.6.1.4.1.4743.1.2.2.29.1.121 | counter | read-only |
Number Of Unexpected Polls for this CPE |
| expedIfBssRemoteCPEBWUsage | 1.3.6.1.4.1.4743.1.2.2.29.1.122 | integer | read-only |
Sync Session Bandwidth Usage for all calls on this CPE from the perspective of CPE |
| expedIfBssRemoteCPEEfficiency | 1.3.6.1.4.1.4743.1.2.2.29.1.123 | integer | read-only |
Efficiency use of bandwidth for all calls on this CPE |
| expedIfBssRemoteCPEHighWater | 1.3.6.1.4.1.4743.1.2.2.29.1.124 | counter | read-only |
Highest Queue Depth for call symbols. |
| expedIfBssRemoteCPEVoiceFrRt | 1.3.6.1.4.1.4743.1.2.2.29.1.125 | integer | read-only |
Rate of packets received over the Ethernet for Voice Call. |
| expedIfBssRemoteCPEAvgNPI | 1.3.6.1.4.1.4743.1.2.2.29.1.126 | integer | read-only |
Avg Next Poll Interval (NPI). This tells the base how often the CPE wants to be polled. |
| expedIfBssRemoteCPEConcatBuffers | 1.3.6.1.4.1.4743.1.2.2.29.1.127 | counter | read-only |
Number of times concatenation took place on the uplink. |
| expedIfBssRemoteCPENumBufConcat | 1.3.6.1.4.1.4743.1.2.2.29.1.128 | counter | read-only |
Number of ethernet frames that were concatenated together. |
| expedIfBssRemoteCPECurrentTemp | 1.3.6.1.4.1.4743.1.2.2.29.1.129 | integer | read-only |
Current Temperature on the CPE in Celsius. A value of -273 indicates that the CPE has no temperature sensor. |
| expedIfBssRemoteCPETxPower | 1.3.6.1.4.1.4743.1.2.2.29.1.130 | integer | read-only |
Current Transmit power on the CPE in dB. A value of 0 indicates that the CPE has no power sensor. |
| expedIfBssRemoteCPEQPSKUp | 1.3.6.1.4.1.4743.1.2.2.29.1.131 | counter | read-only |
Number of bytes on the uplink at QPSK modulation level |
| expedIfBssRemoteCPEQPSKDown | 1.3.6.1.4.1.4743.1.2.2.29.1.132 | counter | read-only |
Number of bytes on the downlink at QPSK modulation level |
| expedIfBssRemoteCPE16QUp | 1.3.6.1.4.1.4743.1.2.2.29.1.133 | counter | read-only |
Number of bytes on the uplink at 16 QAM modulation level |
| expedIfBssRemoteCPE16QDown | 1.3.6.1.4.1.4743.1.2.2.29.1.134 | counter | read-only |
Number of bytes on the downlink at 16 QAM modulation level |
| expedIfBssRemoteCPE64QUp | 1.3.6.1.4.1.4743.1.2.2.29.1.135 | counter | read-only |
Number of bytes on the uplink at 64 QAM modulation level |
| expedIfBssRemoteCPE64QDown | 1.3.6.1.4.1.4743.1.2.2.29.1.136 | counter | read-only |
Number of bytes on the downlink at 64 QAM modulation level |
| expedIfBssRemoteCPE16QLiteUp | 1.3.6.1.4.1.4743.1.2.2.29.1.137 | counter | read-only |
Number of bytes on the uplink at 16 QAM Lite modulation level |
| expedIfBssRemoteCPE16QLiteDown | 1.3.6.1.4.1.4743.1.2.2.29.1.138 | counter | read-only |
Number of bytes on the downlink at 16 QAM Lite modulation level |
| expedIfBssRemoteCurrentRxLevel | 1.3.6.1.4.1.4743.1.2.2.29.1.139 | displaystring | read-only |
Current RX Modulation Level |
| expedIfBssRemoteCurrentTxLevel | 1.3.6.1.4.1.4743.1.2.2.29.1.140 | displaystring | read-only |
Current TX Modulation Level |
| expedIfBssRemotePollInterval | 1.3.6.1.4.1.4743.1.2.2.30 | integer | read-write |
Indicates how often each CPE in the BssRemoteCPE table will be queried for over the air SNMP stats. |
| expedIfBssRemotePollTimeout | 1.3.6.1.4.1.4743.1.2.2.31 | integer | read-write |
Indicates how long to wait for an over the air SNMP query to complete before indicating that the Poll was unsuccessful. |
| expedIfBssAAADroppedCDRS | 1.3.6.1.4.1.4743.1.2.2.32 | counter | read-only |
Number of CDR's dropped due to out of buffer condition. |
| expedIfBssNoResToPollTimeout | 1.3.6.1.4.1.4743.1.2.2.33 | integer | read-write |
Number of seconds to wait for a Response to a Poll before tearing down the call. |
| expedIfBssMaxNumberOfCalls | 1.3.6.1.4.1.4743.1.2.2.34 | integer | read-only |
Maximum number of calls this base has been provisioned for. |
| expedIfBssCurrentNumberOfCalls | 1.3.6.1.4.1.4743.1.2.2.35 | integer | read-only |
Current number of active calls on this base. |
| expedIfBssQPSKCpes | 1.3.6.1.4.1.4743.1.2.2.36 | counter | read-only |
Current number of CPEs with downlink modulation at QPSK. This object is obsolete as of base station software version 4.3 and is replaced by expedIfBssModTbl. |
| expedIfBss16QAMCpes | 1.3.6.1.4.1.4743.1.2.2.37 | counter | read-only |
Current number of CPEs with downlink modulation at 16 QAM. This object is obsolete as of base station software version 4.3 and is replaced by expedIfBssModTbl. |
| expedIfBss64QAMCpes | 1.3.6.1.4.1.4743.1.2.2.38 | counter | read-only |
Current number of CPEs with downlink modulation at 64 QAM. This object is obsolete as of base station software version 4.3 and is replaced by expedIfBssModTbl. |
| expedIfBss16QAMLiteCpes | 1.3.6.1.4.1.4743.1.2.2.39 | counter | read-only |
Current number of CPEs with downlink modulation at 16 QAMLite. This object is obsolete as of base station software version 4.3 and is replaced by expedIfBssModTbl. |
| expedIfBssQPSKDownBytes | 1.3.6.1.4.1.4743.1.2.2.40 | counter | read-only |
Total number of QPSK bytes sent from the base on the downlink. This object is obsolete as of base station software version 4.3 and is replaced by expedIfBssModTbl. |
| expedIfBssQPSKUpBytes | 1.3.6.1.4.1.4743.1.2.2.41 | counter | read-only |
Total number of QPSK bytes received by the base on the uplink. This object is obsolete as of base station software version 4.3 and is replaced by expedIfBssModTbl. |
| expedIfBss16QAMDownBytes | 1.3.6.1.4.1.4743.1.2.2.42 | counter | read-only |
Total number of 16 QAM bytes sent from the base on the downlink. This object is obsolete as of base station software version 4.3 and is replaced by expedIfBssModTbl. |
| expedIfBss16QAMUpBytes | 1.3.6.1.4.1.4743.1.2.2.43 | counter | read-only |
Total number of 16 QAM bytes received by the base on the uplink. This object is obsolete as of base station software version 4.3 and is replaced by expedIfBssModTbl. |
| expedIfBss64QAMDownBytes | 1.3.6.1.4.1.4743.1.2.2.44 | counter | read-only |
Total number of 64 QAM bytes sent from the base on the downlink. This object is obsolete as of base station software version 4.3 and is replaced by expedIfBssModTbl. |
| expedIfBss64QAMUpBytes | 1.3.6.1.4.1.4743.1.2.2.45 | counter | read-only |
Total number of 64 QAM bytes received by the base on the uplink. This object is obsolete as of base station software version 4.3 and is replaced by expedIfBssModTbl. |
| expedIfBss16QAMLiteDownBytes | 1.3.6.1.4.1.4743.1.2.2.46 | counter | read-only |
Total number of 16 QAM Lite bytes sent from the base on the downlink. This object is obsolete as of base station software version 4.3 and is replaced by expedIfBssModTbl. |
| expedIfBss16QAMLiteUpBytes | 1.3.6.1.4.1.4743.1.2.2.47 | counter | read-only |
Total number of 16 QAM Lite bytes received by the base on the uplink. This object is obsolete as of base station software version 4.3 and is replaced by expedIfBssModTbl. |
| expedIfBssRelayIPHosts | 1.3.6.1.4.1.4743.1.2.2.48 | integer | read-only |
The current number of dynamic hosts that have IP access using DHCP. |
| expedIfBssRelayPPPOEHosts | 1.3.6.1.4.1.4743.1.2.2.49 | integer | read-only |
The current number of dynamic hosts that have PPPoE access. This count does not include PPPoE access by static IP hosts. |
| expedIfBssLocalAllow | 1.3.6.1.4.1.4743.1.2.2.50 | integer | read-write |
The permission the Local Authority gives to each CPE, where enable allows CPEs to register, and disable disallows CPEs to register. Note: When a CPE is disallowed the CPE must be rebooted in order to register with this base station again. This defaults to enable Enumeration: 'enable': 1, 'disable': 2. |
| expedIfBssLocalHosts | 1.3.6.1.4.1.4743.1.2.2.51 | integer | read-write |
The number of hosts Local Authority allows behind each CPE. This defaults to 10 |
| expedIfBssLocalSla | 1.3.6.1.4.1.4743.1.2.2.52 | displaystring | read-write |
The Service Level Agreement (SLA) parameters given to each CPE. This is of the form up-down, where up and down are decimal numbers between 0 and 10000, inclusive, separated by a dash character. This defaults to 100-100. |
| expedIfBssLocalVlan | 1.3.6.1.4.1.4743.1.2.2.53 | integer | read-write |
The VLAN identifier Local Authority assigns to each CPE. This object replaces the expedDevVlanLegacyID object. This defaults to 1. |
| expedIfBssLocalVoipAddress | 1.3.6.1.4.1.4743.1.2.2.54 | ipaddress | read-write |
The VoIP server address Local Authority assigns to each CPE. allows the VoIP use through the CPE and disable disallows VoIP use through the CPE. This defaults to 0.0.0.0. |
| expedIfBssLocalVoipState | 1.3.6.1.4.1.4743.1.2.2.55 | integer | read-write |
The VoIP state Local Authority assigns to each CPE, where enable allows the VoIP use through the CPE and disable disallows VoIP use through the CPE. This defaults to enable. Enumeration: 'enable': 1, 'disable': 2. |
| expedIfBssModTbl | 1.3.6.1.4.1.4743.1.2.2.56 | no-access |
Table of stats for throughput at each modulation. |
|
| 1.3.6.1.4.1.4743.1.2.2.56.1 | no-access |
Table of stats for throughput at each modulation. |
||
| expedIfBssModTblIndex | 1.3.6.1.4.1.4743.1.2.2.56.1.1 | integer | read-only |
Index for each modulation |
| expedIfBssModTblName | 1.3.6.1.4.1.4743.1.2.2.56.1.2 | displaystring | read-only |
Descriptive name for the modulation. |
| expedIfBssModTblUpSlotUsage | 1.3.6.1.4.1.4743.1.2.2.56.1.3 | counter | read-only |
Total uplink slots at each modulation. |
| expedIfBssModTblUpSlotVOIP | 1.3.6.1.4.1.4743.1.2.2.56.1.4 | counter | read-only |
Total uplink slots for voip at each modulation. |
| expedIfBssModTblUpBytes | 1.3.6.1.4.1.4743.1.2.2.56.1.5 | counter | read-only |
Total uplink bytes at each modulation. |
| expedIfBssModTblUpMessages | 1.3.6.1.4.1.4743.1.2.2.56.1.6 | counter | read-only |
Total uplink messages at each modulation. |
| expedIfBssModTblDownSlotUsage | 1.3.6.1.4.1.4743.1.2.2.56.1.7 | counter | read-only |
Total downlink slot usage at each modulation. |
| expedIfBssModTblDownBytes | 1.3.6.1.4.1.4743.1.2.2.56.1.8 | counter | read-only |
Total downlink bytes at each modulation (includes VoIP bytes). |
| expedIfBssModTblNumCPES | 1.3.6.1.4.1.4743.1.2.2.56.1.9 | integer | read-only |
Number CPEs at each modulation. |
| expedIfBssModTblChgReqs | 1.3.6.1.4.1.4743.1.2.2.56.1.10 | counter | read-only |
Number change modulation requests received for each modulation. |
| expedIfBssModTblDownBytesVOIP | 1.3.6.1.4.1.4743.1.2.2.56.1.11 | counter | read-only |
Total VoIP downlink bytes at each modulation. |
| expedIfBssModTblUpBytesVOIP | 1.3.6.1.4.1.4743.1.2.2.56.1.12 | counter | read-only |
Total VoIP uplink bytes at each modulation. |
| expedIfBssModUpSlotsPerSec | 1.3.6.1.4.1.4743.1.2.2.57 | integer | read-only |
Total uplink slots per second. |
| expedIfBssModDownSlotsPerSec | 1.3.6.1.4.1.4743.1.2.2.58 | integer | read-only |
Total down slots per second. |
| expedIfBssAAAAllow | 1.3.6.1.4.1.4743.1.2.2.59 | counter | read-only |
Total number of allow PV's. |
| expedIfBssAAADeny | 1.3.6.1.4.1.4743.1.2.2.60 | counter | read-only |
Total number of deny PV's. |
| expedIfBssAAADeregCPE | 1.3.6.1.4.1.4743.1.2.2.61 | counter | read-only |
Total number of de-reg CPE PV's. |
| expedIfBssAAABindIP | 1.3.6.1.4.1.4743.1.2.2.62 | counter | read-only |
Total number of bind IP PV's. |
| expedIfBssAAAPutConfig | 1.3.6.1.4.1.4743.1.2.2.63 | counter | read-only |
Total number of put config PV's. |
| expedIfBssAAAFetchConfig | 1.3.6.1.4.1.4743.1.2.2.64 | counter | read-only |
Total number of fetch config PV's. |
| expedIfBssAAAUnkBase | 1.3.6.1.4.1.4743.1.2.2.65 | counter | read-only |
Total number of unknown base PV's. |
| expedIfBssAAAVlanAtts | 1.3.6.1.4.1.4743.1.2.2.66 | counter | read-only |
Total number of VLAN attribute PV's. |
| expedIfBssAAABaseAtts | 1.3.6.1.4.1.4743.1.2.2.67 | counter | read-only |
Total number of base attribute PV's. |
| expedIfBssAAAReconnect | 1.3.6.1.4.1.4743.1.2.2.68 | counter | read-only |
Total number of reconnect to primary AAA PV's. |
| expedIfBssAAAHbCdr | 1.3.6.1.4.1.4743.1.2.2.69 | counter | read-only |
Total number of heartbeat messages (CDRs) sent. |
| expedIfBssAAAHbPv | 1.3.6.1.4.1.4743.1.2.2.70 | counter | read-only |
Total number of heartbeat messages (PVs) received. |
| expedIfBssAAAHbInterval | 1.3.6.1.4.1.4743.1.2.2.71 | integer | read-only |
Heartbeat interval received on the AAA connection. |
| expedIfBssAAAHbDisconnects | 1.3.6.1.4.1.4743.1.2.2.72 | counter | read-only |
Total number of times the heartbeat detector forced disconnection from AAA due to timeout. |
| expedIfBssRelayMaxSSTransit | 1.3.6.1.4.1.4743.1.2.2.73 | integer | read-write |
The max amount of time in 10ths of a second a sync session frame can live within the device before it is considered stale and is deleted. |
| expedIfBssRelayDHCPAgentCircuitId | 1.3.6.1.4.1.4743.1.2.2.74 | truthvalue | read-write |
Indicate whether a relay DHCP agent circuit id is attached to all the client-to-server DHCP messages. |
| expedIfBssRelayDHCPAgentRemoteId | 1.3.6.1.4.1.4743.1.2.2.75 | truthvalue | read-write |
Indicate whether a relay DHCP agent remote id is attached to all the client-to-server DHCP messages. |
| expedIfBssRelayDHCPNumAddAgentFail | 1.3.6.1.4.1.4743.1.2.2.76 | counter | read-only |
The number of failing to add agent circuit id and/or remote id in the client-to-server DHCP packets due to not enough space in the packets. |
| expedIfBssRelayDHCPNumDiscardExtraRelayInfo | 1.3.6.1.4.1.4743.1.2.2.77 | counter | read-only |
The number of DHCP packets discarded due to the existing relay agent information in the client-to-server DHCP packet when adding DHCP agent circuit id and/or remote id to it. |
| expedIfBssRelayDHCPNumDiscardNoEnd | 1.3.6.1.4.1.4743.1.2.2.78 | counter | read-only |
The number of DHCP packets discarded due to DHCP_END option missing when adding DHCP agent circuit id and/or remote id to client-to-server DHCP packets. |
| expedIfBssAdmissionCtrl | 1.3.6.1.4.1.4743.1.2.2.79 | integer | read-write |
VoIP admission control. The enable of VoIP admission control turns on the stream precedence and preemption capability. Enumeration: 'enable': 1, 'disable': 2. |
| expedIfBssNumberOfReleaseRetries | 1.3.6.1.4.1.4743.1.2.2.80 | integer | read-write |
Number of retransmission of Sync Session release message. |
| expedIfBssHiModulation | 1.3.6.1.4.1.4743.1.2.2.81 | integer | read-write |
Controls whether or not high modulation can be used to transport VoIP traffic on the uplink. When enabled, a transmitting CPE is allowed to use a modulation higher than the basic QPSK modulation level. When disabled, CPEs must use QPSK modulation for all uplink VoIP data. Note that this only controls uplink VoIP modulation. Enumeration: 'enable': 1, 'disable': 2. |
| expedIfBssNumOfCallPri0 | 1.3.6.1.4.1.4743.1.2.2.82 | counter | read-only |
The total number of calls requested by a CPE on this base at priority 0. |
| expedIfBssNumOfCallPri1 | 1.3.6.1.4.1.4743.1.2.2.83 | counter | read-only |
The total number of calls requested by a CPE on this base at priority 1. |
| expedIfBssNumOfCallPri2 | 1.3.6.1.4.1.4743.1.2.2.84 | counter | read-only |
The total number of calls requested by a CPE on this base at priority 2. |
| expedIfBssNumOfCallPri3 | 1.3.6.1.4.1.4743.1.2.2.85 | counter | read-only |
The total number of calls requested by a CPE on this base at priority 3. |
| expedIfBssNumOfCallPreemptedPri0 | 1.3.6.1.4.1.4743.1.2.2.86 | counter | read-only |
The number of calls preempted at priority 0. |
| expedIfBssNumOfCallPreemptedPri1 | 1.3.6.1.4.1.4743.1.2.2.87 | counter | read-only |
The number of calls preempted at priority 1. |
| expedIfBssNumOfCallPreemptedPri2 | 1.3.6.1.4.1.4743.1.2.2.88 | counter | read-only |
The number of calls preempted at priority 2. |
| expedIfBssNumOfBusyCallOrigPri0 | 1.3.6.1.4.1.4743.1.2.2.89 | counter | read-only |
The number of calls at priority 0 that is failed to make due to originator VoIP busy. |
| expedIfBssNumOfBusyCallOrigPri1 | 1.3.6.1.4.1.4743.1.2.2.90 | counter | read-only |
The number of calls at priority 1 that is failed to make due to originator VoIP busy. |
| expedIfBssNumOfBusyCallOrigPri2 | 1.3.6.1.4.1.4743.1.2.2.91 | counter | read-only |
The number of calls at priority 2 that is failed to make due to originator VoIP busy. |
| expedIfBssNumOfBusyCallOrigPri3 | 1.3.6.1.4.1.4743.1.2.2.92 | counter | read-only |
The number of calls at priority 3 that is failed to make due to originator VoIP busy. |
| expedIfBssNumOfBusyCallTermPri0 | 1.3.6.1.4.1.4743.1.2.2.93 | counter | read-only |
The number of calls at priority 0 that is failed to make due to terminator VoIP busy. |
| expedIfBssNumOfBusyCallTermPri1 | 1.3.6.1.4.1.4743.1.2.2.94 | counter | read-only |
The number of calls at priority 1 that is failed to make due to terminator VoIP busy. |
| expedIfBssNumOfBusyCallTermPri2 | 1.3.6.1.4.1.4743.1.2.2.95 | counter | read-only |
The number of calls at priority 2 that is failed to make due to terminator VoIP busy. |
| expedIfBssNumOfBusyCallTermPri3 | 1.3.6.1.4.1.4743.1.2.2.96 | counter | read-only |
The number of calls at priority 3 that is failed to make due to terminator VoIP busy. |
| expedIfBssNumOfVoIPNotAllowOrig | 1.3.6.1.4.1.4743.1.2.2.97 | counter | read-only |
The number of calls that is failed to make due to originator cpe not provisioned. |
| expedIfBssNumOfVoIPNotAllowTerm | 1.3.6.1.4.1.4743.1.2.2.98 | counter | read-only |
The number of calls that is failed to make due to terminator cpe not provisioned. |
| expedIfBssNumOfVoIPNotAuthOrig | 1.3.6.1.4.1.4743.1.2.2.99 | counter | read-only |
The number of calls that is failed to make due to originator cpe requesting a wrong SIP server. |
| expedIfBssNumOfVoIPNotAuthTerm | 1.3.6.1.4.1.4743.1.2.2.100 | counter | read-only |
The number of calls that is failed to make due to terminator cpe requesting a wrong SIP server. |
| expedIfBssNumOfCallRoamPri0 | 1.3.6.1.4.1.4743.1.2.2.101 | counter | read-only |
The total number of calls roamed to this base at priority 0. |
| expedIfBssNumOfCallRoamPri1 | 1.3.6.1.4.1.4743.1.2.2.102 | counter | read-only |
The total number of calls roamed to this base at priority 1. |
| expedIfBssNumOfCallRoamPri2 | 1.3.6.1.4.1.4743.1.2.2.103 | counter | read-only |
The total number of calls roamed to this base at priority 2. |
| expedIfBssNumOfCallRoamPri3 | 1.3.6.1.4.1.4743.1.2.2.104 | counter | read-only |
The total number of calls roamed to this base at priority 3. |
| expedDevTrap | 1.3.6.1.4.1.4743.2 | |||
| expedDevTrapVars | 1.3.6.1.4.1.4743.2.3 | |||
| expedDevTrapBTSName | 1.3.6.1.4.1.4743.2.3.1 | displaystring | read-only |
System name of the BTS sending the trap. This object is obsolete as of base station software version 4.3 and has no replacement. |
| expedDevTrapBTSLocation | 1.3.6.1.4.1.4743.2.3.2 | displaystring | read-only |
System location of the BTS sending the trap. This object is obsolete as of base station software version 4.3 and has no replacement. |
| expedDevTrapBTSMessage | 1.3.6.1.4.1.4743.2.3.3 | displaystring | read-only |
Message that is accompanying the trap. This object is obsolete as of base station software version 4.3 and has no replacement. |
| nextnetTraps | 1.3.6.1.4.1.47430.0 |
Specifies the nextnet traps. This object is obsolete as of base station software version 4.3 and has no replacement. |
||