NETWORK-APPLIANCE-MIB: View SNMP OID List / Download MIB

VENDOR: NETWORK APPLIANCE CORPORATION


 Home MIB: NETWORK-APPLIANCE-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 netapp 1.3.6.1.4.1.789
             userDefined 1.3.6.1.4.1.789.0.2
A polling-style trap built using the 'snmp traps' command on the filer.
             dhmNoticeDegradedIO 1.3.6.1.4.1.789.0.6
Disk Health Monitor - Reported a Disk Degraded-I/O Event
             dhmNoticePFAEvent 1.3.6.1.4.1.789.0.7
Disk Health Monitor - Reported a Disk Predictive-Failure Event
             emergencyTrap 1.3.6.1.4.1.789.0.11
A user-defined trap indicating an extremely urgent situation, usually indicating that the system has failed and is shutting down.
             alertTrap 1.3.6.1.4.1.789.0.12
A user-defined trap indicating a condition that should be corrected immediately, such as a failed disk.
             criticalTrap 1.3.6.1.4.1.789.0.13
A user-defined trap indicating a critical condition, such as a hard device error.
             errorTrap 1.3.6.1.4.1.789.0.14
A user-defined trap indicating an error condition, such as a mistake in a configuration file.
             warningTrap 1.3.6.1.4.1.789.0.15
A user-defined trap indicating a condition which is not an error, but which may require special handling.
             notificationTrap 1.3.6.1.4.1.789.0.16
A user-defined trap meant to provide notification, such as an hourly uptime message.
             informationalTrap 1.3.6.1.4.1.789.0.17
A user-defined trap used for informational purposes.
             dbgTrap 1.3.6.1.4.1.789.0.18
A user-defined trap used for debugging purposes. This trap was previously mis-documented as being trap number 17, with the name debugTrap. It has always, actually, been trap 18. The name change is to avoid issues with environments that already have a record for debugTrap.
             diskFailedShutdown 1.3.6.1.4.1.789.0.21
System is shutting down because the system has been running in degraded mode for 24 hours. The trap includes a string describing the failed disk.
             diskFailed 1.3.6.1.4.1.789.0.22
One or more disks failed. The trap includes a string describing the failed disk(s).
             diskRepaired 1.3.6.1.4.1.789.0.26
The failed disks have been repaired. This trap is a placeholder - it is not currently sent by Data ONTAP.
             fanFailureShutdown 1.3.6.1.4.1.789.0.31
Critical chassis or cpu fans have failed and the system is shutting down.
             fanFailed 1.3.6.1.4.1.789.0.33
One or more chassis fans failed. The trap includes a string describing the failed fan(s).
             fanWarning 1.3.6.1.4.1.789.0.35
One or more chassis or cpu fans are in warning state. The trap includes a string describing the fan(s) in the warning state.
             fanRepaired 1.3.6.1.4.1.789.0.36
All fans are repaired.
             powerSupplyFailureShutdown 1.3.6.1.4.1.789.0.41
Critical power supplies or power rails failed and the system is shutting down.
             powerSupplyFailed 1.3.6.1.4.1.789.0.43
One or more redundant power supplies failed. Include in the trap a string describing the failed power supply(ies).
             powerSupplyWarning 1.3.6.1.4.1.789.0.45
One or more power supplies or power rails in warning state. Include in the trap a string describing the power supply(ies) or the power rail(s) in the warning state.
             powerSupplyRepaired 1.3.6.1.4.1.789.0.46
Previously-failed power supplies or power rails have been repaired.
             cpuTooBusy 1.3.6.1.4.1.789.0.55
CPU utilization exceeds 90%. This trap is not enabled by default. To enable this trap set the registry entry options.monitor.cpu.enable to on. Note that as the threshold for this trap is checked once a minute it is possible to receive multiple instances of this trap in a short time.
             cpuOk 1.3.6.1.4.1.789.0.56
CPU utilization has dropped back below 90%. This trap is a placeholder - it is not currently sent by Data ONTAP.
             nvramBatteryDischarged 1.3.6.1.4.1.789.0.62
The NVRAM battery is fully discharged.
             nvramBatteryLow 1.3.6.1.4.1.789.0.63
The charge in the NVRAM battery is low.
             clusterNodeFailed 1.3.6.1.4.1.789.0.72
A node in a Cluster FailOver configuration failed. Its partner will assume service for the failed node.
             clusterNodeTakenOver 1.3.6.1.4.1.789.0.75
The partner has taken over for a failed cluster node.
             clusterNodeRepaired 1.3.6.1.4.1.789.0.76
A cluster node has resumed operation.
             volumeFull 1.3.6.1.4.1.789.0.82
At least one volume is more than 98% full. The string sent with the trap gives the name of the volume or volumes which exceed the volumeFull or volumeNearlyFull thresholds
             volumeNearlyFull 1.3.6.1.4.1.789.0.85
At least one volume is more than 95% full. The string sent with the trap gives the name of the volume or volumes which exceed the volumeFull or volumeNearlyFull thresholds
             volumeRepaired 1.3.6.1.4.1.789.0.86
All volumes are now under 95% full.
             volumesStillFull 1.3.6.1.4.1.789.0.87
At least one volume that was full or nearly full is now OK, but more volumes still exceed the volumeNearlyFull or volumeFull thresholds. This trap is generally sent within a short time of when a volume becomes OK, though if two volumes become OK within this timeframe, only one trap is sent. The string sent with the trap gives the name of the volume or volumes which still exceed the volumeFull or volumeNearlyFull thresholds. It does not send the name of any volume that is OK.
             overTempShutdown 1.3.6.1.4.1.789.0.91
System temperature is too high to continue operating. The system is shutting down.
             overTemp 1.3.6.1.4.1.789.0.95
System temperature is too high and in the warning level.
             overTempRepaired 1.3.6.1.4.1.789.0.96
System temperature has returned to an acceptable value.
             shelfFault 1.3.6.1.4.1.789.0.103
A disk storage shelf reported a fault, probably due to a problem with drive placement, fans, power, or temperature.
             shelfRepaired 1.3.6.1.4.1.789.0.106
A previously-reported shelf fault is now corrected.
             globalStatusNonRecoverable 1.3.6.1.4.1.789.0.111
The appliance's overall status changed to 'nonRecoverable', indicating a problem so severe that the appliance is shutting down.
             globalStatusCritical 1.3.6.1.4.1.789.0.113
The appliance's overall status changed to 'critical', indicating a problem that needs immediate attention.
             globalStatusNonCritical 1.3.6.1.4.1.789.0.115
The appliance's overall status changed to 'nonCritical', indicating a problem that needs attention.
             globalStatusOk 1.3.6.1.4.1.789.0.116
The appliance's overall status returned to normal.
             softQuotaExceeded 1.3.6.1.4.1.789.0.126
A user has exceeded their soft quota limit.
             softQuotaNormal 1.3.6.1.4.1.789.0.127
A user is safely back under their soft quota limit.
             autosupportSendError 1.3.6.1.4.1.789.0.134
Unable to send autosupport. The trap includes a string describing the reason for the failure.
             autosupportConfigurationError 1.3.6.1.4.1.789.0.135
Autosupport may be configured incorrectly. The trap includes a string describing the mis-configuration.
             autosupportSent 1.3.6.1.4.1.789.0.136
Autosupport was sent successfully.
             upsLinePowerOff 1.3.6.1.4.1.789.0.142
UPS: Input line power has failed and UPS is now on battery.
             upsBatteryCritical 1.3.6.1.4.1.789.0.143
UPS: Battery is nearly exhausted, starting graceful shutdown.
             upsShuttingDown 1.3.6.1.4.1.789.0.144
UPS: Shutting down now: Time left on battery is exhuasted.
             upsBatteryWarning 1.3.6.1.4.1.789.0.145
UPS: Warning: Time left on battery is getting critical.
             upsLinePowerRetored 1.3.6.1.4.1.789.0.146
UPS: Input line power has been restored and UPS is now off battery.
             appEmergency 1.3.6.1.4.1.789.0.151
The application encountered an extremely urgent situation and requires an immediate response.
             appAlert 1.3.6.1.4.1.789.0.152
The application is in a condition that should be corrected immediately.
             appCritical 1.3.6.1.4.1.789.0.153
The application encountered a critical condition.
             appError 1.3.6.1.4.1.789.0.154
The application encountered an error condition.
             appWarning 1.3.6.1.4.1.789.0.155
The application is in a condition which is not an error, but which may require special handling.
             appNotice 1.3.6.1.4.1.789.0.156
The application is notifing of a certain event.
             appInfo 1.3.6.1.4.1.789.0.157
The application's message is meant for informational purposes.
             appTrap 1.3.6.1.4.1.789.0.158
The application requires to be debugged.
             alfFilewrap 1.3.6.1.4.1.789.0.162
The internal audit file has wrapped. You are currently losing event records. Warning the user.
             alfFileSaved 1.3.6.1.4.1.789.0.166
The internal audit log has been autosaved to an external evt file. Notifying the user.
             alfFileNearlyFull 1.3.6.1.4.1.789.0.167
The internal audit log file is nearly full. The file is going to wrap. Notifying the user.
             quotaExceeded 1.3.6.1.4.1.789.0.176
One of the quota limits has been exceeded. The trap includes a string describing the specific event which triggered the trap. The string is structured in the following form: Quota Event: status=exceeded, type={hard|soft|threshold}, user={username}, volume={volume}, limit_item={files|disk}, limit_value={#files|#kilobytes} [ , treeid={tree-id} ] [ , vfiler={vfiler} ] An example of a complete message would be: Quota Event: status=exceeded, type=soft, user=admin, volume=vol1, limit_item=disk, limit_value=1000000, treeid=8 Additional key=value items may, in the future, be appended to this message.
             quotaNormal 1.3.6.1.4.1.789.0.177
One of the quota limits has gone back down to a normal level. The trap includes a string describing the specific event which triggered the trap. The string is structured in the following form: Quota Event: status=normal, type={hard|soft|threshold}, user={username}, volume={volume}, limit_item={files|disk}, limit_value={#files|#kilobytes} [ , treeid={tree-id} ] [ , vfiler={vfiler} ] An example of a complete message would be: Quota Event: status=normal, type=soft, user=admin, volume=vol1, limit_item=disk, limit_value=1000000, treeid=8 Additional key=value items may, in the future, be appended to this message.
             waflDirNearlyFull 1.3.6.1.4.1.789.0.186
The directory has surpassed 90% of its sub-directory limit. The priority of waflDirFull and this trap are out of order for backwards compatibility.
             waflDirFull 1.3.6.1.4.1.789.0.187
The directory has reached its sub-directory limit
             eccSummary 1.3.6.1.4.1.789.0.192
Memory ECC: number of new correctable ECC errors
             eccMasked 1.3.6.1.4.1.789.0.195
Memory ECC: High frequency of ECC errors
             ftpdError 1.3.6.1.4.1.789.0.204
Ftp daemon: service stopped
             ftpdMaxConnNotice 1.3.6.1.4.1.789.0.206
Ftp daemon: number of connections hits maximum number
             ftpdMaxConnThresholdNotice 1.3.6.1.4.1.789.0.216
Ftp daemon: number of connections nearly hits maximum number
             scsitgtFCPLinkBreak 1.3.6.1.4.1.789.0.222
SCSI Target: Link Break on FCP adapter
             scsitgtPartnerPathMisconfigured 1.3.6.1.4.1.789.0.224
SCSI Target: FCP Partner Path Misconfigured
             scsitgtThrottleNotice 1.3.6.1.4.1.789.0.226
SCSI Target: Throttle limit event notification
             vifPrimaryLinkFailed 1.3.6.1.4.1.789.0.237
Vif: The primary Interface on a Single mode vif has failed
             vifAllLinksFailed 1.3.6.1.4.1.789.0.238
Vif: All the links of the vif have failed
             vfStopped 1.3.6.1.4.1.789.0.245
A vFiler has stopped.
             vfStarted 1.3.6.1.4.1.789.0.246
A vFiler has started.
             vscanVirusDetectedError 1.3.6.1.4.1.789.0.254
VScan: A virus scanner has detected a virus on the Filer
             vscanDisConnection 1.3.6.1.4.1.789.0.255
VScan: A virus scanner has dropped its connection from the Filer
             vscanConfigurationChange 1.3.6.1.4.1.789.0.256
VScan: There has been a change to the vscan configuration
             vscanConnection 1.3.6.1.4.1.789.0.257
VScan: A virus scanner has made a connection to the Filer
             vscanServerUpgrade 1.3.6.1.4.1.789.0.266
VScan: The Vscan server has been upgraded
             volumeRestrictedByMirrorBigIo 1.3.6.1.4.1.789.0.272
A volume that experienced a medium error during reconstruction is restricted and marked wafl-inconsistent, but starting wafliron has failed. This trap is issued to alert operator that a volume is not accessible and wafliron must be started to allow access to it.
             volumeInconsistentUmount 1.3.6.1.4.1.789.0.274
This trap is issued when we unmount a volume due to an inconsistency.
             volumeStateChanged 1.3.6.1.4.1.789.0.275
Volume is being taken offline or being restricted. The string sent with trap specifies name of affected volume and its state.
             volumeOnline 1.3.6.1.4.1.789.0.276
Volume is online now. The string sent with trap specifies name of volume which is online now.
             rmcCardNeedsReplacement 1.3.6.1.4.1.789.0.283
Remote Management Controller card needs replacement. The trap includes a string specifying the reason for replacement
             rmcCardMissingCables 1.3.6.1.4.1.789.0.284
Remote Management Controller card is missing its internal cable, or LAN cable or power supply cable. The trap includes a string specifing the missing component.
             volumeRemoteUnreachable 1.3.6.1.4.1.789.0.294
Local volume encountered an error while communicating to remote volume.
             volumeRemoteOk 1.3.6.1.4.1.789.0.296
The communication between remote volume and local volume returned to normal.
             volumeRemoteRestored 1.3.6.1.4.1.789.0.297
The data on remote volume has been fully restored to local volume.
             volumeRemoteRestoreBegin 1.3.6.1.4.1.789.0.298
The data on remote volume has started being restored to local volume by Restore-on-Demand.
             volumeRestrictedRootConflict 1.3.6.1.4.1.789.0.304
Volume is restricted due to a root volume conflict. The string sent with trap specifies name of conflicting volume which is being restricted.
             volumeOfflineTooBig 1.3.6.1.4.1.789.0.314
Volume can not be brought online because its raw size is larger than maximum allowed size. The string sent with trap specifies name of affected volume and its raw size, and maximum allowed size.
             volumeOffline 1.3.6.1.4.1.789.0.324
Volume is being taken offline. The string sent with trap specifies name of affected volume and reason for being taken offline.
             volumeRestricted 1.3.6.1.4.1.789.0.334
Volume is being restricted. The string sent with trap specifies name of affected volume and reason for being restricted.
             volumeDegradedDirty 1.3.6.1.4.1.789.0.344
Volume is degraded and has dirty parity. WAFL_check must be run on this volume before it can be brought online. The string sent with trap specifies name of affected volume.
             volumeError 1.3.6.1.4.1.789.0.354
This trap is issued when a volume can not be brought online due to an error. The string sent with trap specifies name of affected volume and error description.
             snapmirrorSyncFailed 1.3.6.1.4.1.789.0.364
Synchronous SnapMirror failed and went into asynchronous mode.
             snapmirrorSyncOk 1.3.6.1.4.1.789.0.366
Synchronous SnapMirror went into synchronous mode.
             chassisTemperatureShutdown 1.3.6.1.4.1.789.0.371
The chassis temperature is extreme. The appliance has initiated a shutdown to protect itself. The operating environment should be monitored and corrected before restarting the appliance.
             chassisTemperatureWarning 1.3.6.1.4.1.789.0.372
The chassis temperature is either too high or too low. The temperature should be monitored and, if possible, corrected.
             chassisTemperatureUnknown 1.3.6.1.4.1.789.0.375
The chassis temperature is unknown, because reading can't be obtained from the chassis temperature sensor.
             chassisTemperatureOk 1.3.6.1.4.1.789.0.376
The chassis temperature is OK.
             chassisCPUFanStopped 1.3.6.1.4.1.789.0.381
One or more CPU fans have stopped. The appliance has initiated a shutdown to protect itself. A new motherboard may be required to correct the fan. Contact Network Appliance for direction.
             chassisCPUFanSlow 1.3.6.1.4.1.789.0.383
A CPU fan is spinning too slowly. A new motherboard may be required to correct the fan. Contact Network Appliance for direction.
             chassisCPUFanOk 1.3.6.1.4.1.789.0.386
All CPU fan(s) are properly functioning.
             chassisPowerSuppliesFailed 1.3.6.1.4.1.789.0.391
Multiple chassis power supplies failed.
             chassisPowerSupplyDegraded 1.3.6.1.4.1.789.0.392
One or more chassis power supplies are degraded. A description of the degraded state has been logged to the console and message log file.
             chassisPowerSupplyFailed 1.3.6.1.4.1.789.0.393
One chassis power supply failed.
             chassisPowerSupplyRemoved 1.3.6.1.4.1.789.0.394
One or more chassis power supplies are removed.
             chassisPowerSupplyOff 1.3.6.1.4.1.789.0.395
One or more chassis power supplies are off.
             chassisPowerSuppliesOk 1.3.6.1.4.1.789.0.396
The chassis power supplies are all functioning properly.
             chassisPowerSupplyOk 1.3.6.1.4.1.789.0.397
This chassis power supply is functioning properly.
             chassisPowerDegraded 1.3.6.1.4.1.789.0.403
The power within the chassis is degraded. A description of the degraded state has been logged to the console and message log file.
             chassisPowerOk 1.3.6.1.4.1.789.0.406
The power within the chassis is functioning properly.
             chassisFanDegraded 1.3.6.1.4.1.789.0.412
A chassis fan has been degraded.
             chassisFanRemoved 1.3.6.1.4.1.789.0.413
A chassis fan FRU has been removed.
             chassisFanStopped 1.3.6.1.4.1.789.0.414
One or more chassis fans have stopped.
             chassisFanWarning 1.3.6.1.4.1.789.0.415
One or more chassis fans is spinning slowly or too fast.
             chassisFanOk 1.3.6.1.4.1.789.0.416
All chassis fans are functioning properly.
             writeVerificationFailed 1.3.6.1.4.1.789.0.424
A write has failed a verification test on a SnapValidator enabled volume.
             domainControllerDisconnect 1.3.6.1.4.1.789.0.435
A CIFS domain controller connection to the filer has failed.
             dcPasswdChangeFailed 1.3.6.1.4.1.789.0.436
An attempt to change the filer's password with the domain controller has failed.
             domainControllerConnected 1.3.6.1.4.1.789.0.437
A CIFS domain controller connection to the filer has been established.
             plexFailed 1.3.6.1.4.1.789.0.444
This trap is issued when one plex of a mirrored traditional volume or aggregate is failed. The string sent with this trap specifies name of affected plex or mirrored traditional volume or aggregate.
             plexOffline 1.3.6.1.4.1.789.0.454
This trap is issued when a plex becomes offline. The string sent with this trap specifies name of affected plex or mirrored traditional volume or aggregate.
             shelfSESElectronicsFailed 1.3.6.1.4.1.789.0.464
One or more of the enclosure services devices in a disk shelf has failed. Some shelf designs combine the enclosure monitoring hardware function into the module that provides the storage interface to the shelf. A failure in the enclosure monitoring section of these combined modules does not necessarily indicate a failure in disk or loop or bus operation, which may be able to continue.
             shelfSESElectronicsInfo 1.3.6.1.4.1.789.0.467
A previously reported failure of an enclosure services device in a disk shelf has been corrected, or the device has reported information that does not necessarily require customer action.
             shelfIFModuleFailed 1.3.6.1.4.1.789.0.473
One or more of the storage interface modules in a disk shelf has failed. Some shelf designs combine the enclosure monitoring hardware function into the module that operates the fibre channel loop or SCSI in the shelf. This failure is of the storage interface itself, not a failure of the enclosure monitoring, which may be able to continue. This failure may make one or more disks in the shelf or in the loop or bus unavailable.
             shelfIFModuleWarning 1.3.6.1.4.1.789.0.475
One or more of the storage interface modules in a disk shelf has a warning condition. Some shelf designs combine the enclosure monitoring hardware function into the module that operates the fibre channel loop or SCSI in the shelf. This warning condition is of the storage interface itself, not a failure of the enclosure monitoring, which may be able to continue.
             shelfIFModuleInfo 1.3.6.1.4.1.789.0.477
A previously reported failure of a disk shelf interface module has been corrected, or the module has reported information that does not necessarily require customer action.
             maxDirSizeAlert 1.3.6.1.4.1.789.0.482
A directory has reached it's maxdirsize limit. Either increase the maxdirsize or clean up the directory.
             maxDirSizeWarning 1.3.6.1.4.1.789.0.485
A directory is getting close to it's maxdirsize limit. Either increase the maxdirsize or clean up the directory.
             cifsStatsExhaustMemCtrlBlk 1.3.6.1.4.1.789.0.497
A request for a CIFS control block can not be granted. All control blocks are in use.
             chassisPSRemovedxMinShutdown 1.3.6.1.4.1.789.0.501
Power Supply Unit is removed from the system. System will be shutdown in x minutes if it is not put back.
             chassisPSUsMismatch 1.3.6.1.4.1.789.0.505
Power Supply Units in the system are of different type. Please replace them with correct Power Supply Units.
             chassisFanFailxMinShutdown 1.3.6.1.4.1.789.0.511
Multiple chassis fan failure. System will shut down in a few minutes if not corrected.
             chassisPSUwrongInput 1.3.6.1.4.1.789.0.515
Power Supply Unit (PSU) in the system is connected to an incompatible external power source. Please change the power source being used or replace the PSU with one that matches the current power source.
             powerSupplyFanFailxMinShutdown 1.3.6.1.4.1.789.0.521
Multiple power supply fans failure. System will shut down in a few minutes if not corrected.
             remoteSystemMgtAlert 1.3.6.1.4.1.789.0.532
system remote management detected a system down event. The trap includes a string describing the specific event which triggered the trap. The string is structured in the following form: Remote Management Event: type={system_down|system_up|test|keep_alive}, severity={alert|warning|notice|normal|debug|info}, event={post_error|watchdog_reset|power_loss|abnormal_reboot}, key=value An example of a complete message would be: Remote Management Event: type=system_down, severity=alert, event=watchdog_reset, ss=16bytes Additional key=value items may, in the future, be appended to this message. The events that would generate this trap would be: post_error: Fatal POST error on boot power_loss: Loss of power to system abnormal_reboot: l2_watchdog_reset
             remoteSystemMgmtWarning 1.3.6.1.4.1.789.0.535
system remote management detected a system down event. The trap includes a string describing the specific event which triggered the trap. The string is structured in the following form: Remote Management Event: type={system_down|system_up|test|keep_alive}, severity={alert|warning|notice|normal|debug|info}, event={loss-of-heartbeat}, key=value An example of a complete message would be: Remote Management Event: type=system_down, severity=warning, event=loss_of_heartbeat, ss=16bytes Additional key=value items may, in the future, be appended to this message. The events that would generate this trap would be: loss_of_heartbeat: Loss of heartbeat to the RLM.
             remoteSystemMgmtNotification 1.3.6.1.4.1.789.0.536
system remote management detected a system down event. The trap includes a string describing the specific event which triggered the trap. The string is structured in the following form: Remote Management Event: type={system_down|system_up|test|keep_alive}, severity={alert|warning|notice|normal|debug|info}, event={power_off_via_rlm,power_cycle_via_rlm,reset_via_rlm}, key=value An example of a complete message would be: Remote Management Event: type=system_down, severity=notice, event=power_off_via_rlm, ss=16bytes Additional key=value items may, in the future, be appended to this message. The events that would generate this trap would be: power_off_via_rlm: This indicates system power off power_cycle_via_rlm: This indicates system power cycle reset_via_rlm: This indicates system reset.
             remoteSystemMgmtPeriodic 1.3.6.1.4.1.789.0.547
This is a periodic keep alive from system remote management. The trap includes a string describing the specific event which triggered the trap. The string is structured in the following form: Remote Management Event: type={system_down|system_up|test|keep_alive}, severity={alert|warning|notice|normal|debug|info}, event={periodic_message} An example of a complete message would be: Remote Management Event: type=keep_alive, severity=info, event=periodic_message Additional key=value items may, in the future, be appended to this message.
             remotesystemMgmtTest 1.3.6.1.4.1.789.0.556
This is a test trap from system remote management. The trap includes a string describing the specific event which triggered the trap. The string is structured in the following form: Remote Management Event: type={system_down|system_up|test|keep_alive}, severity={alert|warning|notice|normal|debug|info}, event={periodic_message} An example of a complete message would be: Remote Management Event: type=test, severity=notice, event=test Additional key=value items may, in the future, be appended to this message.
             diskMultipathOneSwitch 1.3.6.1.4.1.789.0.562
A multipathed disk is only connected to one switch.
             diskMultipathNoTakeover 1.3.6.1.4.1.789.0.563
Multipath disks or luns could not be detected for the partner. The node will be unable to takeover correctly.
             diskMultipathWarning 1.3.6.1.4.1.789.0.565
Synchronous mirroring is enabled, even though disks are not multipathed.
             driveDisableErr 1.3.6.1.4.1.789.0.574
A drive has been disabled by the shelf module due to hardware errors. If it is the only drive in the shelf that is disabled, replace the drive.
             hbaOfflineInformation 1.3.6.1.4.1.789.0.587
A host bus adapter (HBA) port has been disabled. This state may be caused either by user command or by errors that make the interface unable to communicate with attached devices.
             lunSnapRestoreStatus 1.3.6.1.4.1.789.0.606
Status of the Snap Restore
             lunCloneCreate 1.3.6.1.4.1.789.0.616
Created a LUN Clone
             lunCloneSplitStart 1.3.6.1.4.1.789.0.626
LUN Clone Split started
             lunCloneSplitComplete 1.3.6.1.4.1.789.0.627
LUN Clone Split completed
             flexCloneSplitStart 1.3.6.1.4.1.789.0.636
Flex Clone Split started
             flexCloneSplitComplete 1.3.6.1.4.1.789.0.637
Flex Clone Split completed
             volumeCloneCreate 1.3.6.1.4.1.789.0.646
Created a Volume Clone
             snapAutoDelete 1.3.6.1.4.1.789.0.656
Snapshot Autodeleted
             volumeAutogrow 1.3.6.1.4.1.789.0.666
Volume is Autogrown
         netapp1 1.3.6.1.4.1.789.1
             product 1.3.6.1.4.1.789.1.1
                 productType 1.3.6.1.4.1.789.1.1.1 integer read-only
The product type representing the target platform. Enumeration: 'pciBased': 2, 'eisaBased': 1.
                 productVersion 1.3.6.1.4.1.789.1.1.2 displaystring read-only
Version String for the Software Running on this platform.
                 productId 1.3.6.1.4.1.789.1.1.3 displaystring read-only
The System ID of this system.
                 productVendor 1.3.6.1.4.1.789.1.1.4 integer read-only
The vendor id of this system, indicating the company that has supplied the product. Enumeration: 'netapp': 1, 'dell': 2, 'ibm': 3.
                 productModel 1.3.6.1.4.1.789.1.1.5 displaystring read-only
The model name of the system. Examples are FAS980 and FAS3050.
                 productFirmwareVersion 1.3.6.1.4.1.789.1.1.6 displaystring read-only
Version string for the Firmware running on this platform.
                 productGuiUrl 1.3.6.1.4.1.789.1.1.7 displaystring read-only
The complete URL used to access the administrative GUI for a browser-based interface.
                 productApiUrl 1.3.6.1.4.1.789.1.1.8 displaystring read-only
The complete URL used to access the administrative API for a programmatic interface.
                 productSerialNum 1.3.6.1.4.1.789.1.1.9 displaystring read-only
The product serial number. Returns unknown if it cannot be determined.
                 productPartnerSerialNum 1.3.6.1.4.1.789.1.1.10 displaystring read-only
The partner's serial number, not applicable if there is no partner, and unknown if it cannot be determined.
                 productCPUArch 1.3.6.1.4.1.789.1.1.11 integer read-only
The CPU architecture type of this appliance Enumeration: 'alpha': 2, 'sparc': 4, 'x86': 1, 'mips': 3.
                 productTrapData 1.3.6.1.4.1.789.1.1.12 displaystring read-only
This returns a static string. This object is used as a placeholder for enterprise traps.
                 productMachineType 1.3.6.1.4.1.789.1.1.13 displaystring read-only
The machine type of the system. Examples are FAS980 and FAS3050.
             sysStat 1.3.6.1.4.1.789.1.2
                 cpu 1.3.6.1.4.1.789.1.2.1
                     cpuUpTime 1.3.6.1.4.1.789.1.2.1.1 timeticks read-only
The time (in hundredths of a second) that the CPU has been up since the last boot.
                     cpuBusyTime 1.3.6.1.4.1.789.1.2.1.2 timeticks read-only
The time (in hundredths of a second) that the CPU has been doing useful work since the last boot.
                     cpuBusyTimePerCent 1.3.6.1.4.1.789.1.2.1.3 integer32 read-only
The percent of time that the CPU has been doing useful work since the last time a client requested the cpuBusyTimePerCent.
                     cpuIdleTime 1.3.6.1.4.1.789.1.2.1.4 timeticks read-only
The time (in hundredths of a second) that the CPU has been idle since the last boot.
                     cpuIdleTimePerCent 1.3.6.1.4.1.789.1.2.1.5 integer32 read-only
The percent of time that the CPU has been idle since the last time a client requested the cpuBusyTimePerCent.
                     cpuCount 1.3.6.1.4.1.789.1.2.1.6 integer32 read-only
The number of CPUs in the system.
                     cpuSwitchInvocations 1.3.6.1.4.1.789.1.2.1.7 counter32 read-only
The number of sk_switch invocations.
                     cpuContextSwitches 1.3.6.1.4.1.789.1.2.1.8 counter32 read-only
The number of hardware context switches.
                     cpuInterrupts 1.3.6.1.4.1.789.1.2.1.9 counter32 read-only
The number of interrupts during a CP.
                     cpuNonCPInterrupts 1.3.6.1.4.1.789.1.2.1.10 counter32 read-only
The number of interrupts not during a CP.
                     cpuCPInterruptPercent 1.3.6.1.4.1.789.1.2.1.11 integer32 read-only
The percentage of time handling CP interrupts.
                     cpuNonCPInterruptPercent 1.3.6.1.4.1.789.1.2.1.12 integer32 read-only
The percentage of time handling non-cp interrupts.
                     cpuTotalDomainSwitches 1.3.6.1.4.1.789.1.2.1.13 counter32 read-only
The total number of Domain Switches.
                 misc 1.3.6.1.4.1.789.1.2.2
                     miscNfsOps 1.3.6.1.4.1.789.1.2.2.1 integer32 read-only
The total number of Server side NFS calls since the last boot
                     miscNetRcvdKB 1.3.6.1.4.1.789.1.2.2.2 integer32 read-only
The total number of KBytes received on all the network interfaces, since the last boot.
                     miscNetSentKB 1.3.6.1.4.1.789.1.2.2.3 integer32 read-only
The total number of KBytes transmitted on all the network interfaces, since the last boot.
                     miscGlobalStatus 1.3.6.1.4.1.789.1.2.2.4 integer read-only
This indicates the overall status of the appliance. The algorithm to determine the value uses both hardware status (e.g. the number of failed fans) and volume status (e.g. number of volumes that are full). The algorithm is subject to change in future releases, but the range of values will not change. Enumeration: 'ok': 3, 'unknown': 2, 'other': 1, 'critical': 5, 'nonCritical': 4, 'nonRecoverable': 6.
                     miscHighNfsOps 1.3.6.1.4.1.789.1.2.2.5 counter32 read-only
The total number of Server side NFS calls since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                     miscLowNfsOps 1.3.6.1.4.1.789.1.2.2.6 counter32 read-only
The total number of Server side NFS calls since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                     miscHighCifsOps 1.3.6.1.4.1.789.1.2.2.7 counter32 read-only
The total number of Server side CIFS calls since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                     miscLowCifsOps 1.3.6.1.4.1.789.1.2.2.8 counter32 read-only
The total number of Server side CIFS calls since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                     miscHighHttpOps 1.3.6.1.4.1.789.1.2.2.9 counter32 read-only
The total number of HTTP operations received since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                     miscLowHttpOps 1.3.6.1.4.1.789.1.2.2.10 counter32 read-only
The total number of HTTP operations received since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                     miscHighNetRcvdBytes 1.3.6.1.4.1.789.1.2.2.11 counter32 read-only
The total number of bytes received on all the network interfaces, since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                     miscLowNetRcvdBytes 1.3.6.1.4.1.789.1.2.2.12 counter32 read-only
The total number of bytes received on all the network interfaces, since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                     miscHighNetSentBytes 1.3.6.1.4.1.789.1.2.2.13 counter32 read-only
The total number of bytes transmitted on all the network interfaces, since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                     miscLowNetSentBytes 1.3.6.1.4.1.789.1.2.2.14 counter32 read-only
The total number of bytes transmitted on all the network interfaces, since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                     miscHighDiskReadBytes 1.3.6.1.4.1.789.1.2.2.15 counter32 read-only
The total number of bytes read from disk since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                     miscLowDiskReadBytes 1.3.6.1.4.1.789.1.2.2.16 counter32 read-only
The total number of bytes read from disk since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                     miscHighDiskWriteBytes 1.3.6.1.4.1.789.1.2.2.17 counter32 read-only
The total number of bytes written to disk since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                     miscLowDiskWriteBytes 1.3.6.1.4.1.789.1.2.2.18 counter32 read-only
The total number of bytes written to disk since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                     miscHighTapeReadBytes 1.3.6.1.4.1.789.1.2.2.19 counter32 read-only
The total number of bytes read from tape since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                     miscLowTapeReadBytes 1.3.6.1.4.1.789.1.2.2.20 counter32 read-only
The total number of bytes read from tape since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                     miscHighTapeWriteBytes 1.3.6.1.4.1.789.1.2.2.21 counter32 read-only
The total number of bytes written to tape since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                     miscLowTapeWriteBytes 1.3.6.1.4.1.789.1.2.2.22 counter32 read-only
The total number of bytes written to tape since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                     miscCacheAge 1.3.6.1.4.1.789.1.2.2.23 integer32 read-only
Age in minutes of the oldest read-only blocks in the buffer cache. This indicates how fast read operations are cycling through system memory; when the appliance is reading very large files (larger than the machine's memory size), buffer cache age will be very low.
                     miscCorrectedMachineChecks 1.3.6.1.4.1.789.1.2.2.24 counter32 read-only
Number of corrected machine checks since the last boot.
                     miscGlobalStatusMessage 1.3.6.1.4.1.789.1.2.2.25 displaystring read-only
A string describing the global status, including a description of the condition (if any) that caused the status to be anything other than ok(3).
                     miscWindowsSetupWizardVersion 1.3.6.1.4.1.789.1.2.2.26 integer32 read-only
The version number of Windows Setup Wizard required to configure the appliance. Windows Setup Wizard with a version number lower than this integer is not capable of configuring the appliance.
                     misc64NfsOps 1.3.6.1.4.1.789.1.2.2.27 counter64 read-only
The total number of Server side NFS calls since the last boot. This object returns all of the 64 bit unsigned integer.
                     misc64CifsOps 1.3.6.1.4.1.789.1.2.2.28 counter64 read-only
The total number of Server side CIFS calls since the last boot. This object returns all of the 64 bit unsigned integer.
                     misc64HttpOps 1.3.6.1.4.1.789.1.2.2.29 counter64 read-only
The total number of HTTP operations received since the last boot. This object returns all of the 64 bit unsigned integer.
                     misc64NetRcvdBytes 1.3.6.1.4.1.789.1.2.2.30 counter64 read-only
The total number of bytes received on all the network interfaces, since the last boot. This object returns all of the 64 bit unsigned integer.
                     misc64NetSentBytes 1.3.6.1.4.1.789.1.2.2.31 counter64 read-only
The total number of bytes transmitted on all the network interfaces, since the last boot. This object returns all of the 64 bit unsigned integer.
                     misc64DiskReadBytes 1.3.6.1.4.1.789.1.2.2.32 counter64 read-only
The total number of bytes read from disk since the last boot. This object returns all of the 64 bit unsigned integer.
                     misc64DiskWriteBytes 1.3.6.1.4.1.789.1.2.2.33 counter64 read-only
The total number of bytes written to disk since the last boot. This object returns all of the 64 bit unsigned integer.
                     misc64TapeReadBytes 1.3.6.1.4.1.789.1.2.2.34 counter64 read-only
The total number of bytes read from tape since the last boot. This object returns all of the 64 bit unsigned integer.
                     misc64TapeWriteBytes 1.3.6.1.4.1.789.1.2.2.35 counter64 read-only
The total number of bytes written to tape since the last boot. This object returns all of the 64 bit unsigned integer.
                 cf 1.3.6.1.4.1.789.1.2.3
                     cfSettings 1.3.6.1.4.1.789.1.2.3.1 integer read-only
Clustered Failover configuration settings. The value notConfigured(1) indicates that the cluster is not licensed. The thisNodeDead(5) setting indicates that this node has been taken over. Enumeration: 'disabled': 3, 'enabled': 2, 'thisNodeDead': 5, 'notConfigured': 1, 'takeoverByPartnerDisabled': 4.
                     cfState 1.3.6.1.4.1.789.1.2.3.2 integer read-only
Clustered Failover state. Enumeration: 'canTakeover': 2, 'takeover': 4, 'cannotTakeover': 3, 'dead': 1.
                     cfCannotTakeoverCause 1.3.6.1.4.1.789.1.2.3.3 integer read-only
The reason this node cannot takeover its partner Enumeration: 'disabledByPartner': 5, 'ok': 1, 'interconnectOffline': 4, 'unknownReason': 2, 'takeoverFailed': 6, 'disabledByOperator': 3.
                     cfPartnerStatus 1.3.6.1.4.1.789.1.2.3.4 integer read-only
This is the status last returned by the Clustered Failover partner. Enumeration: 'maybeDown': 1, 'ok': 2, 'dead': 3.
                     cfPartnerLastStatusUpdate 1.3.6.1.4.1.789.1.2.3.5 timeticks read-only
If non-zero, the absolute time of the last update from the Clustered Failover partner.
                     cfPartnerName 1.3.6.1.4.1.789.1.2.3.6 displaystring read-only
Hostname for Clustered Failover partner.
                     cfPartnerSysid 1.3.6.1.4.1.789.1.2.3.7 integer32 read-only
System ID for Clustered Failover partner.
                     cfInterconnectStatus 1.3.6.1.4.1.789.1.2.3.8 integer read-only
The current status of the interconnect. The partialFailure(3) status indicates that one of the links in the interconnect hardware is down. Enumeration: 'down': 2, 'partialFailure': 3, 'notPresent': 1, 'up': 4.
                 environment 1.3.6.1.4.1.789.1.2.4
                     envOverTemperature 1.3.6.1.4.1.789.1.2.4.1 integer read-only
An indication of whether the hardware is currently operating outside of its recommended temperature range. The hardware will shutdown if the temperature exceeds critical thresholds. Enumeration: 'yes': 2, 'no': 1.
                     envFailedFanCount 1.3.6.1.4.1.789.1.2.4.2 integer32 read-only
Count of the number of chassis fans which are not operating within the recommended RPM range.
                     envFailedFanMessage 1.3.6.1.4.1.789.1.2.4.3 displaystring read-only
Text message describing the current condition of chassis fans. This is useful only if envFailedFanCount is not zero.
                     envFailedPowerSupplyCount 1.3.6.1.4.1.789.1.2.4.4 integer32 read-only
Count of the number of power supplies which are in degraded mode.
                     envFailedPowerSupplyMessage 1.3.6.1.4.1.789.1.2.4.5 displaystring read-only
Text message describing the state of any power supplies which are currently degraded. This is useful only if envFailedPowerSupplyCount is not zero.
                 nvram 1.3.6.1.4.1.789.1.2.5
                     nvramBatteryStatus 1.3.6.1.4.1.789.1.2.5.1 integer read-only
An indication of the current status of the NVRAM battery or batteries. Batteries which are fully or partially discharged may not fully protect the system during a crash. The end-of-life status values are based on the manufacturer's recommended life for the batteries. Enumeration: 'ok': 1, 'nearEndOfLife': 5, 'atEndOfLife': 6, 'unknown': 7, 'fullyCharged': 9, 'fullyDischarged': 3, 'partiallyDischarged': 2, 'overCharged': 8, 'notPresent': 4.
                 cp 1.3.6.1.4.1.789.1.2.6
                     cpTime 1.3.6.1.4.1.789.1.2.6.1 timeticks read-only
The time (in hundredths of a second) since boot during which the system has had a consistency point (cp) operation in progress.
                     cpFromTimerOps 1.3.6.1.4.1.789.1.2.6.2 counter32 read-only
The number of consistency point operations since boot that were caused by timer.
                     cpFromSnapshotOps 1.3.6.1.4.1.789.1.2.6.3 counter32 read-only
The number of consistency point operations since boot that were caused by snapshot operation.
                     cpFromLowWaterOps 1.3.6.1.4.1.789.1.2.6.4 counter32 read-only
The number of consistency point operations since boot that were caused by low water mark.
                     cpFromHighWaterOps 1.3.6.1.4.1.789.1.2.6.5 counter32 read-only
The number of consistency point operations since boot that were caused by high water mark.
                     cpFromLogFullOps 1.3.6.1.4.1.789.1.2.6.6 counter32 read-only
The number of consistency point operations since boot that were caused by nv-log full.
                     cpFromCpOps 1.3.6.1.4.1.789.1.2.6.7 counter32 read-only
The number of back to back consistency point operations since boot.
                     cpTotalOps 1.3.6.1.4.1.789.1.2.6.8 counter32 read-only
The total number of consistency point operations since boot.
                     cpFromFlushOps 1.3.6.1.4.1.789.1.2.6.9 counter32 read-only
The number of consistency point operations since boot that were caused by flushing unlogged write data.
                     cpFromSyncOps 1.3.6.1.4.1.789.1.2.6.10 counter32 read-only
The number of consistency point operations since boot that were caused by file system sync requests.
                     cpFromLowVbufOps 1.3.6.1.4.1.789.1.2.6.11 counter32 read-only
The number of consistency point operations since boot that were caused by low virtual buffers.
                     cpFromCpDeferredOps 1.3.6.1.4.1.789.1.2.6.12 counter32 read-only
The number of back to back consistency point operations since boot that were deferred.
                     cpFromLowDatavecsOps 1.3.6.1.4.1.789.1.2.6.13 counter32 read-only
The number of consistency point operations since boot that were caused by low datavecs.
                 autosupport 1.3.6.1.4.1.789.1.2.7
                     autosupportStatus 1.3.6.1.4.1.789.1.2.7.1 integer read-only
An indication of the current status of autosupport on the appliance. describes the success or failure of most recent attempts to send autosupports. Enumeration: 'unknown': 5, 'postFailure': 3, 'ok': 1, 'smtpFailure': 2, 'smtpPostFailure': 4.
                     autosupportStatusMessage 1.3.6.1.4.1.789.1.2.7.2 displaystring read-only
A string describing the autosupport status, including a description of the condition (if any) that caused the status to be anything other than ok(1).
                     autosupportSuccessfulSends 1.3.6.1.4.1.789.1.2.7.3 counter32 read-only
Count of the number of autosupport messages successfully sent since the last reset.
                     autosupportFailedSends 1.3.6.1.4.1.789.1.2.7.4 counter32 read-only
Count of the number of autosupport messages not sent successfully since the last reset.
             nfs 1.3.6.1.4.1.789.1.3
                 curNfs 1.3.6.1.4.1.789.1.3.1
                     rpcServ 1.3.6.1.4.1.789.1.3.1.1
                         rpcCalls 1.3.6.1.4.1.789.1.3.1.1.1 counter32 read-only
The total number of RPC calls received, since the last time the statistics were cleared.
                         rpcBadCalls 1.3.6.1.4.1.789.1.3.1.1.2 counter32 read-only
The total number of calls rejected by the RPC layer, since the last time the statistics were cleared.
                         rpcNullRecvs 1.3.6.1.4.1.789.1.3.1.1.3 counter32 read-only
The number of times an RPC call was not available when it was thought to be received, since the last time the statistics were cleared.
                         rpcBadLens 1.3.6.1.4.1.789.1.3.1.1.4 counter32 read-only
The number of RPC calls received with a length shorter than a minimum-sized RPC call, since the last time the statistics were cleared.
                         rpcServXDRCalls 1.3.6.1.4.1.789.1.3.1.1.5 counter32 read-only
The number of RPC calls received whose header could not be XDR decoded, since the last time the statistics were cleared.
                         rcpTcpCalls 1.3.6.1.4.1.789.1.3.1.1.6 counter32 read-only
The total number of RPC calls received for the TCP protocol, since the last time the statistics were cleared.
                         rcpTcpBadCalls 1.3.6.1.4.1.789.1.3.1.1.7 counter32 read-only
The total number of calls rejected by the RPC layer for the TCP protocol, since the last time the statistics were cleared.
                         rcpTcpNullRecvs 1.3.6.1.4.1.789.1.3.1.1.8 counter32 read-only
The number of times an RPC call for the TCP protocol was not available when it was thought to be received, since the last time the statistics were cleared.
                         rcpTcpBadLens 1.3.6.1.4.1.789.1.3.1.1.9 counter32 read-only
The number of RPC calls for the TCP protocol received with a length shorter than a minimum-sized RPC call, since the last time the statistics were cleared.
                         rcpTcpServXDRCalls 1.3.6.1.4.1.789.1.3.1.1.10 counter32 read-only
The number of RPC calls for the TCP protocol received whose header could not be XDR decoded, since the last time the statistics were cleared.
                         rpcUdpCalls 1.3.6.1.4.1.789.1.3.1.1.11 counter32 read-only
The total number of RPC calls received for the UDP protocol, since the last time the statistics were cleared.
                         rpcUdpBadCalls 1.3.6.1.4.1.789.1.3.1.1.12 counter32 read-only
The total number of calls rejected by the RPC layer for the UDP protocol, since the last time the statistics were cleared.
                         rpcUdpNullRecvs 1.3.6.1.4.1.789.1.3.1.1.13 counter32 read-only
The number of times an RPC call for the UDP protocol was not available when it was thought to be received, since the last time the statistics were cleared.
                         rpcUdpBadLens 1.3.6.1.4.1.789.1.3.1.1.14 counter32 read-only
The number of RPC calls for the UDP protocol received with a length shorter than a minimum-sized RPC call, since the last time the statistics were cleared.
                         rpcUdpServXDRCalls 1.3.6.1.4.1.789.1.3.1.1.15 counter32 read-only
The number of RPC calls for the UDP protocol received whose header could not be XDR decoded, since the last time the statistics were cleared.
                     nfsServ 1.3.6.1.4.1.789.1.3.1.2
                         nfsCalls 1.3.6.1.4.1.789.1.3.1.2.1 counter32 read-only
The total number of NFS calls received, since the last time the statistics were cleared.
                         nfsServBadCalls 1.3.6.1.4.1.789.1.3.1.2.2 counter32 read-only
The total number of received NFS calls rejected, since the last time the statistics were cleared.
                         nfsV2 1.3.6.1.4.1.789.1.3.1.2.3
                             v2Calls 1.3.6.1.4.1.789.1.3.1.2.3.1
                                 v2cNulls 1.3.6.1.4.1.789.1.3.1.2.3.1.1 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_NULL (Do Nothing) procedure, since the last time the statistics were cleared.
                                 v2cGetattrs 1.3.6.1.4.1.789.1.3.1.2.3.1.2 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_GETATTR (Get File Attributes) procedure, since the last time the statistics were cleared.
                                 v2cSetattrs 1.3.6.1.4.1.789.1.3.1.2.3.1.3 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_SETATTR (Set File Attributes) procedure, since the last time the statistics were cleared.
                                 v2cRoots 1.3.6.1.4.1.789.1.3.1.2.3.1.4 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_ROOT (Get Filesystem Root) procedure, since the last time the statistics were cleared.
                                 v2cLookups 1.3.6.1.4.1.789.1.3.1.2.3.1.5 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_LOOKUP (Look Up File Name) procedure, since the last time the statistics were cleared.
                                 v2cReadlinks 1.3.6.1.4.1.789.1.3.1.2.3.1.6 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_READLINK (Read From Symbolic Link) procedure, since the last time the statistics were cleared.
                                 v2cReads 1.3.6.1.4.1.789.1.3.1.2.3.1.7 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_READ (Read From File) procedure, since the last time the statistics were cleared.
                                 v2cWrcaches 1.3.6.1.4.1.789.1.3.1.2.3.1.8 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_WRITECACHE (Write to Cache) procedure, since the last time the statistics were cleared.
                                 v2cWrites 1.3.6.1.4.1.789.1.3.1.2.3.1.9 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_WRITE (Write to File) procedure, since the last time the statistics were cleared.
                                 v2cCreates 1.3.6.1.4.1.789.1.3.1.2.3.1.10 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_CREATE (Create File) procedure, since the last time the statistics were cleared.
                                 v2cRemoves 1.3.6.1.4.1.789.1.3.1.2.3.1.11 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_REMOVE (Remove File) procedure, since the last time the statistics were cleared.
                                 v2cRenames 1.3.6.1.4.1.789.1.3.1.2.3.1.12 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_RENAME (Rename File) procedure, since the last time the statistics were cleared.
                                 v2cLinks 1.3.6.1.4.1.789.1.3.1.2.3.1.13 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_LINK (Create Link to File) procedure, since the last time the statistics were cleared.
                                 v2cSymlinks 1.3.6.1.4.1.789.1.3.1.2.3.1.14 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_SYMLINK (Create Symbolic Link) procedure, since the last time the statistics were cleared.
                                 v2cMkdirs 1.3.6.1.4.1.789.1.3.1.2.3.1.15 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_MKDIR (Create Directory) procedure, since the last time the statistics were cleared.
                                 v2cRmdirs 1.3.6.1.4.1.789.1.3.1.2.3.1.16 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_RMDIR (Remove Directory) procedure, since the last time the statistics were cleared.
                                 v2cReaddirs 1.3.6.1.4.1.789.1.3.1.2.3.1.17 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_READDIR (Read From Directory) procedure, since the last time the statistics were cleared.
                                 v2cStatfss 1.3.6.1.4.1.789.1.3.1.2.3.1.18 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_STATFS (Get Filesystem Attributes) procedure, since the last time the statistics were cleared.
                             v2Percent 1.3.6.1.4.1.789.1.3.1.2.3.2
                                 v2pNulls 1.3.6.1.4.1.789.1.3.1.2.3.2.1 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_NULL (Do Nothing) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.
                                 v2pGetattrs 1.3.6.1.4.1.789.1.3.1.2.3.2.2 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_GETATTR (Get File Attributes) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.
                                 v2pSetattrs 1.3.6.1.4.1.789.1.3.1.2.3.2.3 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_SETATTR (Set File Attributes) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.
                                 v2pRoots 1.3.6.1.4.1.789.1.3.1.2.3.2.4 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_ROOT (Get Filesystem Root) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.
                                 v2pLookups 1.3.6.1.4.1.789.1.3.1.2.3.2.5 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_LOOKUP (Look Up File Name) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.
                                 v2pReadlinks 1.3.6.1.4.1.789.1.3.1.2.3.2.6 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_READLINK (Read From Symbolic Link) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.
                                 v2pReads 1.3.6.1.4.1.789.1.3.1.2.3.2.7 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_READ (Read From File) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.
                                 v2pWrcaches 1.3.6.1.4.1.789.1.3.1.2.3.2.8 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_WRITECACHE (Write to Cache) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.
                                 v2pWrites 1.3.6.1.4.1.789.1.3.1.2.3.2.9 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_WRITE (Write to File) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.
                                 v2pCreates 1.3.6.1.4.1.789.1.3.1.2.3.2.10 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_CREATE (Create File) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.
                                 v2pRemoves 1.3.6.1.4.1.789.1.3.1.2.3.2.11 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_REMOVE (Remove File) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.
                                 v2pRenames 1.3.6.1.4.1.789.1.3.1.2.3.2.12 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_RENAME (Rename File) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.
                                 v2pLinks 1.3.6.1.4.1.789.1.3.1.2.3.2.13 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_LINK (Create Link to File) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.
                                 v2pSymlinks 1.3.6.1.4.1.789.1.3.1.2.3.2.14 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_SYMLINK (Create Symbolic Link) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.
                                 v2pMkdirs 1.3.6.1.4.1.789.1.3.1.2.3.2.15 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_MKDIR (Create Directory) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.
                                 v2pRmdirs 1.3.6.1.4.1.789.1.3.1.2.3.2.16 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_RMDIR (Remove Directory) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.
                                 v2pReaddirs 1.3.6.1.4.1.789.1.3.1.2.3.2.17 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_READDIR (Read From Directory) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.
                                 v2pStatfss 1.3.6.1.4.1.789.1.3.1.2.3.2.18 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_STATFS (Get Filesystem Attributes) procedure as a percentage of total NFS calls received, since the last time the statistics were cleared.
                             v2CachedCalls 1.3.6.1.4.1.789.1.3.1.2.3.3
                                 v2ccNulls 1.3.6.1.4.1.789.1.3.1.2.3.3.1 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_NULL (Do Nothing) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v2ccGetattrs 1.3.6.1.4.1.789.1.3.1.2.3.3.2 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_GETATTR (Get File Attributes) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v2ccSetattrs 1.3.6.1.4.1.789.1.3.1.2.3.3.3 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_SETATTR (Set File Attributes) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v2ccRoots 1.3.6.1.4.1.789.1.3.1.2.3.3.4 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_ROOT (Get Filesystem Root) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v2ccLookups 1.3.6.1.4.1.789.1.3.1.2.3.3.5 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_LOOKUP (Look Up File Name) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v2ccReadlinks 1.3.6.1.4.1.789.1.3.1.2.3.3.6 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_READLINK (Read From Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v2ccReads 1.3.6.1.4.1.789.1.3.1.2.3.3.7 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_READ (Read From File) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v2ccWrcaches 1.3.6.1.4.1.789.1.3.1.2.3.3.8 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_WRITECACHE (Write to Cache) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v2ccWrites 1.3.6.1.4.1.789.1.3.1.2.3.3.9 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_WRITE (Write to File) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v2ccCreates 1.3.6.1.4.1.789.1.3.1.2.3.3.10 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_CREATE (Create File) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v2ccRemoves 1.3.6.1.4.1.789.1.3.1.2.3.3.11 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_REMOVE (Remove File) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v2ccRenames 1.3.6.1.4.1.789.1.3.1.2.3.3.12 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_RENAME (Rename File) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v2ccLinks 1.3.6.1.4.1.789.1.3.1.2.3.3.13 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_LINK (Create Link to File) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v2ccSymlinks 1.3.6.1.4.1.789.1.3.1.2.3.3.14 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_SYMLINK (Create Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v2ccMkdirs 1.3.6.1.4.1.789.1.3.1.2.3.3.15 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_MKDIR (Create Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v2ccRmdirs 1.3.6.1.4.1.789.1.3.1.2.3.3.16 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_RMDIR (Remove Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v2ccReaddirs 1.3.6.1.4.1.789.1.3.1.2.3.3.17 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_READDIR (Read From Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v2ccStatfss 1.3.6.1.4.1.789.1.3.1.2.3.3.18 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_STATFS (Get Filesystem Attributes) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                             v2CachedPerCent 1.3.6.1.4.1.789.1.3.1.2.3.4
                                 v2cpNulls 1.3.6.1.4.1.789.1.3.1.2.3.4.1 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_NULL (Do Nothing) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v2cpGetattrs 1.3.6.1.4.1.789.1.3.1.2.3.4.2 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_GETATTR (Get File Attributes) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v2cpSetattrs 1.3.6.1.4.1.789.1.3.1.2.3.4.3 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_SETATTR (Set File Attributes) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v2cpRoots 1.3.6.1.4.1.789.1.3.1.2.3.4.4 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_ROOT (Get Filesystem Root) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v2cpLookups 1.3.6.1.4.1.789.1.3.1.2.3.4.5 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_LOOKUP (Look Up File Name) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v2cpReadlinks 1.3.6.1.4.1.789.1.3.1.2.3.4.6 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_READLINK (Read From Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v2cpReads 1.3.6.1.4.1.789.1.3.1.2.3.4.7 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_READ (Read From File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v2cpWrcaches 1.3.6.1.4.1.789.1.3.1.2.3.4.8 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_WRITECACHE (Write to Cache) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v2cpWrites 1.3.6.1.4.1.789.1.3.1.2.3.4.9 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_WRITE (Write to File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v2cpCreates 1.3.6.1.4.1.789.1.3.1.2.3.4.10 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_CREATE (Create File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v2cpRemoves 1.3.6.1.4.1.789.1.3.1.2.3.4.11 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_REMOVE (Remove File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v2cpRenames 1.3.6.1.4.1.789.1.3.1.2.3.4.12 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_RENAME (Rename File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v2cpLinks 1.3.6.1.4.1.789.1.3.1.2.3.4.13 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_LINK (Create Link to File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v2cpSymlinks 1.3.6.1.4.1.789.1.3.1.2.3.4.14 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_SYMLINK (Create Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v2cpMkdirs 1.3.6.1.4.1.789.1.3.1.2.3.4.15 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_MKDIR (Create Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v2cpRmdirs 1.3.6.1.4.1.789.1.3.1.2.3.4.16 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_RMDIR (Remove Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v2cpReaddirs 1.3.6.1.4.1.789.1.3.1.2.3.4.17 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_READDIR (Read From Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v2cpStatfss 1.3.6.1.4.1.789.1.3.1.2.3.4.18 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_STATFS (Get Filesystem Attributes) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                         nfsV3 1.3.6.1.4.1.789.1.3.1.2.4
                             v3Calls 1.3.6.1.4.1.789.1.3.1.2.4.1
                                 v3cNulls 1.3.6.1.4.1.789.1.3.1.2.4.1.1 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_NULL (Do Nothing) procedure, since the last time the statistics were cleared.
                                 v3cGetattrs 1.3.6.1.4.1.789.1.3.1.2.4.1.2 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_GETATTR (Get File Attributes) procedure, since the last time the statistics were cleared.
                                 v3cSetattrs 1.3.6.1.4.1.789.1.3.1.2.4.1.3 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_SETATTR (Set File Attributes) procedure, since the last time the statistics were cleared.
                                 v3cLookups 1.3.6.1.4.1.789.1.3.1.2.4.1.4 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_LOOKUP (Lookup Filename) procedure, since the last time the statistics were cleared.
                                 v3cAccesss 1.3.6.1.4.1.789.1.3.1.2.4.1.5 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_ACCESS (Check Access Permission) procedure, since the last time the statistics were cleared.
                                 v3cReadlinks 1.3.6.1.4.1.789.1.3.1.2.4.1.6 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, since the last time the statistics were cleared.
                                 v3cReads 1.3.6.1.4.1.789.1.3.1.2.4.1.7 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_READ (Read From File) procedure, since the last time the statistics were cleared.
                                 v3cWrites 1.3.6.1.4.1.789.1.3.1.2.4.1.8 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_WRITE (Write to File) procedure, since the last time the statistics were cleared.
                                 v3cCreates 1.3.6.1.4.1.789.1.3.1.2.4.1.9 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_CREATE (Create a File) procedure, since the last time the statistics were cleared.
                                 v3cMkdirs 1.3.6.1.4.1.789.1.3.1.2.4.1.10 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_MKDIR (Create a Directory) procedure, since the last time the statistics were cleared.
                                 v3cSymlinks 1.3.6.1.4.1.789.1.3.1.2.4.1.11 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, since the last time the statistics were cleared.
                                 v3cMknods 1.3.6.1.4.1.789.1.3.1.2.4.1.12 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_MKNOD (Create a Special Device) procedure, since the last time the statistics were cleared.
                                 v3cRemoves 1.3.6.1.4.1.789.1.3.1.2.4.1.13 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_REMOVE (Remove a File) procedure, since the last time the statistics were cleared.
                                 v3cRmdirs 1.3.6.1.4.1.789.1.3.1.2.4.1.14 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_RMDIR (Remove a Directory) procedure, since the last time the statistics were cleared.
                                 v3cRenames 1.3.6.1.4.1.789.1.3.1.2.4.1.15 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_RENAME (Rename a File or Directory) procedure, since the last time the statistics were cleared.
                                 v3cLinks 1.3.6.1.4.1.789.1.3.1.2.4.1.16 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_LINK (Create Link to an Object) procedure, since the last time the statistics were cleared.
                                 v3cReaddirs 1.3.6.1.4.1.789.1.3.1.2.4.1.17 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_READDIR (Read From Directory) procedure, since the last time the statistics were cleared.
                                 v3cReaddirPluss 1.3.6.1.4.1.789.1.3.1.2.4.1.18 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_READDIRPLUS (Extended Read from Directory) procedure, since the last time the statistics were cleared.
                                 v3cFsstats 1.3.6.1.4.1.789.1.3.1.2.4.1.19 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, since the last time the statistics were cleared.
                                 v3cFsinfos 1.3.6.1.4.1.789.1.3.1.2.4.1.20 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_FSINFO (Get Static File System Information) procedure, since the last time the statistics were cleared.
                                 v3cPathconfs 1.3.6.1.4.1.789.1.3.1.2.4.1.21 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, since the last time the statistics were cleared.
                                 v3cCommits 1.3.6.1.4.1.789.1.3.1.2.4.1.22 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, since the last time the statistics were cleared.
                             v3Percent 1.3.6.1.4.1.789.1.3.1.2.4.2
                                 v3pNulls 1.3.6.1.4.1.789.1.3.1.2.4.2.1 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_NULL (Do Nothing) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
                                 v3pGetattrs 1.3.6.1.4.1.789.1.3.1.2.4.2.2 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_GETATTR (Get File Attributes) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
                                 v3pSetattrs 1.3.6.1.4.1.789.1.3.1.2.4.2.3 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_SETATTR (Set File Attributes) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
                                 v3pLookups 1.3.6.1.4.1.789.1.3.1.2.4.2.4 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_LOOKUP (Lookup Filename) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
                                 v3pAccesss 1.3.6.1.4.1.789.1.3.1.2.4.2.5 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_ACCESS (Check Access Permission) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
                                 v3pReadlinks 1.3.6.1.4.1.789.1.3.1.2.4.2.6 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
                                 v3pReads 1.3.6.1.4.1.789.1.3.1.2.4.2.7 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_READ (Read From File) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
                                 v3pWrites 1.3.6.1.4.1.789.1.3.1.2.4.2.8 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_WRITE (Write to File) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
                                 v3pCreates 1.3.6.1.4.1.789.1.3.1.2.4.2.9 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_CREATE (Create a File) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
                                 v3pMkdirs 1.3.6.1.4.1.789.1.3.1.2.4.2.10 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_MKDIR (Create a Directory) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
                                 v3pSymlinks 1.3.6.1.4.1.789.1.3.1.2.4.2.11 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
                                 v3pMknods 1.3.6.1.4.1.789.1.3.1.2.4.2.12 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_MKNOD (Create a Special Device) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
                                 v3pRemoves 1.3.6.1.4.1.789.1.3.1.2.4.2.13 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_REMOVE (Remove a File) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
                                 v3pRmdirs 1.3.6.1.4.1.789.1.3.1.2.4.2.14 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_RMDIR (Remove a Directory) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
                                 v3pRenames 1.3.6.1.4.1.789.1.3.1.2.4.2.15 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_RENAME (Rename a File or Directory) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
                                 v3pLinks 1.3.6.1.4.1.789.1.3.1.2.4.2.16 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_LINK (Create Link to an Object) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
                                 v3pReaddirs 1.3.6.1.4.1.789.1.3.1.2.4.2.17 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_READDIR (Read From Directory) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
                                 v3pReaddirPluss 1.3.6.1.4.1.789.1.3.1.2.4.2.18 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_READDIRPLUS (Extended Read from Directory) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
                                 v3pFsstats 1.3.6.1.4.1.789.1.3.1.2.4.2.19 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
                                 v3pFsinfos 1.3.6.1.4.1.789.1.3.1.2.4.2.20 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_FSINFO (Get Static File System Information) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
                                 v3pPathconfs 1.3.6.1.4.1.789.1.3.1.2.4.2.21 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
                                 v3pCommits 1.3.6.1.4.1.789.1.3.1.2.4.2.22 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, as a percentage of the total NFS calls received, since the last time the statistics were cleared.
                             v3CachedCalls 1.3.6.1.4.1.789.1.3.1.2.4.3
                                 v3ccNulls 1.3.6.1.4.1.789.1.3.1.2.4.3.1 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_NULL (Do Nothing) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v3ccGetattrs 1.3.6.1.4.1.789.1.3.1.2.4.3.2 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_GETATTR (Get File Attributes) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v3ccSetattrs 1.3.6.1.4.1.789.1.3.1.2.4.3.3 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_SETATTR (Set File Attributes) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v3ccLookups 1.3.6.1.4.1.789.1.3.1.2.4.3.4 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_LOOKUP (Lookup Filename) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v3ccAccesss 1.3.6.1.4.1.789.1.3.1.2.4.3.5 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_ACCESS (Check Access Permission) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v3ccReadlinks 1.3.6.1.4.1.789.1.3.1.2.4.3.6 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v3ccReads 1.3.6.1.4.1.789.1.3.1.2.4.3.7 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_READ (Read From File) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v3ccWrites 1.3.6.1.4.1.789.1.3.1.2.4.3.8 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_WRITE (Write to File) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v3ccCreates 1.3.6.1.4.1.789.1.3.1.2.4.3.9 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_CREATE (Create a File) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v3ccMkdirs 1.3.6.1.4.1.789.1.3.1.2.4.3.10 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_MKDIR (Create a Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v3ccSymlinks 1.3.6.1.4.1.789.1.3.1.2.4.3.11 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v3ccMknods 1.3.6.1.4.1.789.1.3.1.2.4.3.12 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_MKNOD (Create a Special Device) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v3ccRemoves 1.3.6.1.4.1.789.1.3.1.2.4.3.13 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_REMOVE (Remove a File) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v3ccRmdirs 1.3.6.1.4.1.789.1.3.1.2.4.3.14 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_RMDIR (Remove a Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v3ccRenames 1.3.6.1.4.1.789.1.3.1.2.4.3.15 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_RENAME (Rename a File or Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v3ccLinks 1.3.6.1.4.1.789.1.3.1.2.4.3.16 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_LINK (Create Link to an Object) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v3ccReaddirs 1.3.6.1.4.1.789.1.3.1.2.4.3.17 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_READDIR (Read From Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v3ccReaddirPluss 1.3.6.1.4.1.789.1.3.1.2.4.3.18 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_READDIRPLUS (Extended Read from Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v3ccFsstats 1.3.6.1.4.1.789.1.3.1.2.4.3.19 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v3ccFsinfos 1.3.6.1.4.1.789.1.3.1.2.4.3.20 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_FSINFO (Get Static File System Information) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v3ccPathconfs 1.3.6.1.4.1.789.1.3.1.2.4.3.21 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                                 v3ccCommits 1.3.6.1.4.1.789.1.3.1.2.4.3.22 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, that did not result in the filesystem blocking to read from disk, since the last time the statistics were cleared.
                             v3CachedPerCent 1.3.6.1.4.1.789.1.3.1.2.4.4
                                 v3cpNulls 1.3.6.1.4.1.789.1.3.1.2.4.4.1 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_NULL (Do Nothing) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v3cpGetattrs 1.3.6.1.4.1.789.1.3.1.2.4.4.2 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_GETATTR (Get File Attributes) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v3cpSetattrs 1.3.6.1.4.1.789.1.3.1.2.4.4.3 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_SETATTR (Set File Attributes) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v3cpLookups 1.3.6.1.4.1.789.1.3.1.2.4.4.4 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_LOOKUP (Lookup Filename) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v3cpAccesss 1.3.6.1.4.1.789.1.3.1.2.4.4.5 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_ACCESS (Check Access Permission) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v3cpReadlinks 1.3.6.1.4.1.789.1.3.1.2.4.4.6 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v3cpReads 1.3.6.1.4.1.789.1.3.1.2.4.4.7 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_READ (Read From File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v3cpWrites 1.3.6.1.4.1.789.1.3.1.2.4.4.8 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_WRITE (Write to File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v3cpCreates 1.3.6.1.4.1.789.1.3.1.2.4.4.9 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_CREATE (Create a File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v3cpMkdirs 1.3.6.1.4.1.789.1.3.1.2.4.4.10 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_MKDIR (Create a Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v3cpSymlinks 1.3.6.1.4.1.789.1.3.1.2.4.4.11 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v3cpMknods 1.3.6.1.4.1.789.1.3.1.2.4.4.12 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_MKNOD (Create a Special Device) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v3cpRemoves 1.3.6.1.4.1.789.1.3.1.2.4.4.13 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_REMOVE (Remove a File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v3cpRmdirs 1.3.6.1.4.1.789.1.3.1.2.4.4.14 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_RMDIR (Remove a Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v3cpRenames 1.3.6.1.4.1.789.1.3.1.2.4.4.15 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_RENAME (Rename a File or Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v3cpLinks 1.3.6.1.4.1.789.1.3.1.2.4.4.16 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_LINK (Create Link to an Object) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v3cpReaddirs 1.3.6.1.4.1.789.1.3.1.2.4.4.17 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_READDIR (Read From Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v3cpReaddirPluss 1.3.6.1.4.1.789.1.3.1.2.4.4.18 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_READDIRPLUS (Extended Read from Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v3cpFsstats 1.3.6.1.4.1.789.1.3.1.2.4.4.19 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v3cpFsinfos 1.3.6.1.4.1.789.1.3.1.2.4.4.20 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_FSINFO (Get Static File System Information) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v3cpPathconfs 1.3.6.1.4.1.789.1.3.1.2.4.4.21 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                                 v3cpCommits 1.3.6.1.4.1.789.1.3.1.2.4.4.22 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last time the statistics were cleared.
                         replyCache 1.3.6.1.4.1.789.1.3.1.2.5
                             rcInProgressHits 1.3.6.1.4.1.789.1.3.1.2.5.1 counter32 read-only
The number of NFS requests that were dropped, for calls already in progress, since the last time the statistics were cleared.
                             rcDelayHits 1.3.6.1.4.1.789.1.3.1.2.5.2 counter32 read-only
The number of NFS requests that were dropped, for replies already generated within a short interval, since the last time the statistics were cleared. These stats are deprecated. A value of zero will always be returned for these stats.
                             rcMisses 1.3.6.1.4.1.789.1.3.1.2.5.3 counter32 read-only
The number of NFS requests received for which there were no corresponding entries already in the Reply Cache, since the last time the statistics were cleared.
                             rcNonIdemDoneHits 1.3.6.1.4.1.789.1.3.1.2.5.4 counter32 read-only
The number of NFS requests received that resulted in replies being replayed from the Reply Cache, since the last time the statistics were cleared.
                             rcNonIdemNotDoneHits 1.3.6.1.4.1.789.1.3.1.2.5.5 counter32 read-only
The number of NFS requests received for calls that resulted in this request being processed as a new request even when a corresponding entry existed in the Reply Cache, since the last time the statistics were cleared.
                             rcTcpInProgressHits 1.3.6.1.4.1.789.1.3.1.2.5.6 counter32 read-only
The number of NFS requests that were dropped for the TCP protocol, for calls already in progress, since the last time the statistics were cleared.
                             rcTcpDelayHits 1.3.6.1.4.1.789.1.3.1.2.5.7 counter32 read-only
The number of NFS requests that were dropped for the TCP protocol, for replies already generated within a short interval, since the last time the statistics were cleared. These stats are deprecated. A value of zero will always be returned for these stats.
                             rcTcpMisses 1.3.6.1.4.1.789.1.3.1.2.5.8 counter32 read-only
The number of NFS requests received for the TCP protocol for which there were no corresponding entries already in the Reply Cache, since the last time the statistics were cleared.
                             rcTcpNonIdemDoneHits 1.3.6.1.4.1.789.1.3.1.2.5.9 counter32 read-only
The number of NFS requests received for the TCP protocol that resulted in replies being replayed from the Reply Cache, since the last time the statistics were cleared.
                             rcTcpNonIdemNotDoneHits 1.3.6.1.4.1.789.1.3.1.2.5.10 counter32 read-only
The number of NFS requests received for the TCP protocol for calls that resulted in this request being processed as a new request even when a corresponding entry existed in the Reply Cache, since the last time the statistics were cleared.
                             rcUdpInProgressHits 1.3.6.1.4.1.789.1.3.1.2.5.11 counter32 read-only
The number of NFS requests that were dropped for the UDP protocol, for calls already in progress, since the last time the statistics were cleared.
                             rcUdpDelayHits 1.3.6.1.4.1.789.1.3.1.2.5.12 counter32 read-only
The number of NFS requests that were dropped for the UDP protocol, for replies already generated within a short interval, since the last time the statistics were cleared. These stats are deprecated. A value of zero will always be returned for these stats.
                             rcUdpMisses 1.3.6.1.4.1.789.1.3.1.2.5.13 counter32 read-only
The number of NFS requests received for the UDP protocol for which there were no corresponding entries already in the Reply Cache, since the last time the statistics were cleared.
                             rcUdpNonIdemDoneHits 1.3.6.1.4.1.789.1.3.1.2.5.14 counter32 read-only
The number of NFS requests received for the UDP protocol that resulted in replies being replayed from the Reply Cache, since the last time the statistics were cleared.
                             rcUdpNonIdemNotDoneHits 1.3.6.1.4.1.789.1.3.1.2.5.15 counter32 read-only
The number of NFS requests received for the UDP protocol for calls that resulted in this request being processed as a new request even when a corresponding entry existed in the Reply Cache, since the last time the statistics were cleared.
                         nfsrwStats 1.3.6.1.4.1.789.1.3.1.2.6
                             v2ReadStats 1.3.6.1.4.1.789.1.3.1.2.6.1
                                 v2Read512Calls 1.3.6.1.4.1.789.1.3.1.2.6.1.1 counter32 read-only
The number of NFS Version 2 read calls received by the server since last zeroing with request sizes between 0-511 bytes.
                                 v2Read1KCalls 1.3.6.1.4.1.789.1.3.1.2.6.1.2 counter32 read-only
The number of NFS Version 2 read calls received by the server since last zeroing with request sizes between 512-1023 bytes.
                                 v2Read2KCalls 1.3.6.1.4.1.789.1.3.1.2.6.1.3 counter32 read-only
The number of NFS Version 2 read calls received by the server since last zeroing with request sizes between 1K-2047 bytes.
                                 v2Read4KCalls 1.3.6.1.4.1.789.1.3.1.2.6.1.4 counter32 read-only
The number of NFS Version 2 read calls received by the server since last zeroing with request sizes between 2K-4095 bytes.
                                 v2Read8KCalls 1.3.6.1.4.1.789.1.3.1.2.6.1.5 counter32 read-only
The number of NFS Version 2 read calls received by the server since last zeroing with request sizes between 4K-8191 bytes.
                                 v2Read16KCalls 1.3.6.1.4.1.789.1.3.1.2.6.1.6 counter32 read-only
The number of NFS Version 2 read calls received by the server since last zeroing with request sizes between 8K-16383 bytes.
                                 v2Read32KCalls 1.3.6.1.4.1.789.1.3.1.2.6.1.7 counter32 read-only
The number of NFS Version 2 read calls received by the server since last zeroing with request sizes between 16K-32767 bytes.
                                 v2Read64KCalls 1.3.6.1.4.1.789.1.3.1.2.6.1.8 counter32 read-only
The number of NFS Version 2 read calls received by the server since last zeroing with request sizes between 32K-65535 bytes.
                                 v2Read128KCalls 1.3.6.1.4.1.789.1.3.1.2.6.1.9 counter32 read-only
The number of NFS Version 2 read calls received by the server since last zeroing with request sizes between 64K-131071 bytes.
                             v2WriteStats 1.3.6.1.4.1.789.1.3.1.2.6.2
                                 v2Write512Calls 1.3.6.1.4.1.789.1.3.1.2.6.2.1 counter32 read-only
The number of NFS Version 2 write calls received by the server since last zeroing with request sizes between 0-511 bytes.
                                 v2Write1KCalls 1.3.6.1.4.1.789.1.3.1.2.6.2.2 counter32 read-only
The number of NFS Version 2 write calls received by the server since last zeroing with request sizes between 512-1023 bytes.
                                 v2Write2KCalls 1.3.6.1.4.1.789.1.3.1.2.6.2.3 counter32 read-only
The number of NFS Version 2 write calls received by the server since last zeroing with request sizes between 1K-2047 bytes.
                                 v2Write4KCalls 1.3.6.1.4.1.789.1.3.1.2.6.2.4 counter32 read-only
The number of NFS Version 2 write calls received by the server since last zeroing with request sizes between 2K-4095 bytes.
                                 v2Write8KCalls 1.3.6.1.4.1.789.1.3.1.2.6.2.5 counter32 read-only
The number of NFS Version 2 write calls received by the server since last zeroing with request sizes between 4K-8191 bytes.
                                 v2Write16KCalls 1.3.6.1.4.1.789.1.3.1.2.6.2.6 counter32 read-only
The number of NFS Version 2 write calls received by the server since last zeroing with request sizes between 8K-16383 bytes.
                                 v2Write32KCalls 1.3.6.1.4.1.789.1.3.1.2.6.2.7 counter32 read-only
The number of NFS Version 2 write calls received by the server since last zeroing with request sizes between 16K-32767 bytes.
                                 v2Write64KCalls 1.3.6.1.4.1.789.1.3.1.2.6.2.8 counter32 read-only
The number of NFS Version 2 write calls received by the server since last zeroing with request sizes between 32K-65535 bytes.
                                 v2Write128KCalls 1.3.6.1.4.1.789.1.3.1.2.6.2.9 counter32 read-only
The number of NFS Version 2 write calls received by the server since last zeroing with request sizes between 64K-131071 bytes.
                             v3ReadStats 1.3.6.1.4.1.789.1.3.1.2.6.3
                                 v3Read512Calls 1.3.6.1.4.1.789.1.3.1.2.6.3.1 counter32 read-only
The number of NFS Version 3 read calls received by the server since last boot with request sizes between 0-511 bytes.
                                 v3Read1KCalls 1.3.6.1.4.1.789.1.3.1.2.6.3.2 counter32 read-only
The number of NFS Version 3 read calls received by the server since last zeroing with request sizes between 512-1023 bytes.
                                 v3Read2KCalls 1.3.6.1.4.1.789.1.3.1.2.6.3.3 counter32 read-only
The number of NFS Version 3 read calls received by the server since last zeroing with request sizes between 1K-2047 bytes.
                                 v3Read4KCalls 1.3.6.1.4.1.789.1.3.1.2.6.3.4 counter32 read-only
The number of NFS Version 3 read calls received by the server since last zeroing with request sizes between 2K-4095 bytes.
                                 v3Read8KCalls 1.3.6.1.4.1.789.1.3.1.2.6.3.5 counter32 read-only
The number of NFS Version 3 read calls received by the server since last zeroing with request sizes between 4K-8191 bytes.
                                 v3Read16KCalls 1.3.6.1.4.1.789.1.3.1.2.6.3.6 counter32 read-only
The number of NFS Version 3 read calls received by the server since last zeroing with request sizes between 8K-16383 bytes.
                                 v3Read32KCalls 1.3.6.1.4.1.789.1.3.1.2.6.3.7 counter32 read-only
The number of NFS Version 3 read calls received by the server since last zeroing with request sizes between 16K-32767 bytes.
                                 v3Read64KCalls 1.3.6.1.4.1.789.1.3.1.2.6.3.8 counter32 read-only
The number of NFS Version 3 read calls received by the server since last zeroing with request sizes between 32K-65535 bytes.
                                 v3Read128KCalls 1.3.6.1.4.1.789.1.3.1.2.6.3.9 counter32 read-only
The number of NFS Version 3 read calls received by the server since last zeroing with request sizes between 64K-131071 bytes.
                             v3WriteStats 1.3.6.1.4.1.789.1.3.1.2.6.4
                                 v3Write512Calls 1.3.6.1.4.1.789.1.3.1.2.6.4.1 counter32 read-only
The number of NFS Version 3 write calls received by the server since last zeroing with request sizes between 0-511 bytes.
                                 v3Write1KCalls 1.3.6.1.4.1.789.1.3.1.2.6.4.2 counter32 read-only
The number of NFS Version 3 write calls received by the server since last zeroing with request sizes between 512-1023 bytes.
                                 v3Write2KCalls 1.3.6.1.4.1.789.1.3.1.2.6.4.3 counter32 read-only
The number of NFS Version 3 write calls received by the server since last zeroing with request sizes between 1K-2047 bytes.
                                 v3Write4KCalls 1.3.6.1.4.1.789.1.3.1.2.6.4.4 counter32 read-only
The number of NFS Version 3 write calls received by the server since last zeroing with request sizes between 2K-4095 bytes.
                                 v3Write8KCalls 1.3.6.1.4.1.789.1.3.1.2.6.4.5 counter32 read-only
The number of NFS Version 3 write calls received by the server since last zeroing with request sizes between 4K-8191 bytes.
                                 v3Write16KCalls 1.3.6.1.4.1.789.1.3.1.2.6.4.6 counter32 read-only
The number of NFS Version 3 write calls received by the server since last zeroing with request sizes between 8K-16383 bytes.
                                 v3Write32KCalls 1.3.6.1.4.1.789.1.3.1.2.6.4.7 counter32 read-only
The number of NFS Version 3 write calls received by the server since last zeroing with request sizes between 16K-32767 bytes.
                                 v3Write64KCalls 1.3.6.1.4.1.789.1.3.1.2.6.4.8 counter32 read-only
The number of NFS Version 3 write calls received by the server since last zeroing with request sizes between 32K-65535 bytes.
                                 v3Write128KCalls 1.3.6.1.4.1.789.1.3.1.2.6.4.9 counter32 read-only
The number of NFS Version 3 write calls received by the server since last zeroing with request sizes between 64K-131071 bytes.
                     nfsPerClient 1.3.6.1.4.1.789.1.3.1.3
                         pclTable 1.3.6.1.4.1.789.1.3.1.3.1 no-access
Provide a report of per-client NFS statistics since the last time the statistics were cleared.
                             pclEntry 1.3.6.1.4.1.789.1.3.1.3.1.1 no-access
Provide a report of NFS statistics for the referenced NFS client since the last time the statistics were cleared.
                                 pclIpAddr 1.3.6.1.4.1.789.1.3.1.3.1.1.1 ipaddress read-only
The IP address of the referenced client.
                                 pclRpcCalls 1.3.6.1.4.1.789.1.3.1.3.1.1.2 counter32 read-only
The total number of RPC calls received from the referenced client, since the last time the statistics were cleared.
                                 pclRpcBadCalls 1.3.6.1.4.1.789.1.3.1.3.1.1.3 counter32 read-only
The total number of calls received from the referenced client that were rejected by the RPC layer, since the last time the statistics were cleared.
                                 pclRpcNullRecvs 1.3.6.1.4.1.789.1.3.1.3.1.1.4 counter32 read-only
The number of times an RPC call was not available when it was thought to be received from referenced client, since the last time the statistics were cleared.
                                 pclRpcBadLens 1.3.6.1.4.1.789.1.3.1.3.1.1.5 counter32 read-only
The number of RPC calls received from the referenced client with a length shorter than a minimum-sized RPC call, since the last time the statistics were cleared.
                                 pclRpcServXDRCalls 1.3.6.1.4.1.789.1.3.1.3.1.1.6 counter32 read-only
The number of RPC calls received from the referenced client whose header could not be XDR decoded, since the last time the statistics were cleared.
                                 pclNfsCalls 1.3.6.1.4.1.789.1.3.1.3.1.1.7 counter32 read-only
The total number of NFS calls received from the referenced client, since the last time the statistics were cleared.
                                 pclNfsServBadCalls 1.3.6.1.4.1.789.1.3.1.3.1.1.8 counter32 read-only
The total number of NFS calls received from the referenced client that were rejected, since the last time the statistics were cleared.
                                 pclNfsV2Nulls 1.3.6.1.4.1.789.1.3.1.3.1.1.9 counter32 read-only
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_NULL (Do Nothing) procedure, since the last time the statistics were cleared.
                                 pclNfsV2Getattrs 1.3.6.1.4.1.789.1.3.1.3.1.1.10 counter32 read-only
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_GETATTR (Get File Attributes) procedure, since the last time the statistics were cleared.
                                 pclNfsV2Setattrs 1.3.6.1.4.1.789.1.3.1.3.1.1.11 counter32 read-only
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_SETATTR (Set File Attributes) procedure, since the last time the statistics were cleared.
                                 pclNfsV2Roots 1.3.6.1.4.1.789.1.3.1.3.1.1.12 counter32 read-only
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_ROOT (Get Filesystem Root) procedure, since the last time the statistics were cleared.
                                 pclNfsV2Lookups 1.3.6.1.4.1.789.1.3.1.3.1.1.13 counter32 read-only
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_LOOKUP (Look Up File Name) procedure, since the last time the statistics were cleared.
                                 pclNfsV2Readlinks 1.3.6.1.4.1.789.1.3.1.3.1.1.14 counter32 read-only
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_READLINK (Read From Symbolic Link) procedure, since the last time the statistics were cleared.
                                 pclNfsV2Reads 1.3.6.1.4.1.789.1.3.1.3.1.1.15 counter32 read-only
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_READ (Read From File) procedure, since the last time the statistics were cleared.
                                 pclNfsV2Wrcaches 1.3.6.1.4.1.789.1.3.1.3.1.1.16 counter32 read-only
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_WRITECACHE (Write to Cache) procedure, since the last time the statistics were cleared.
                                 pclNfsV2Writes 1.3.6.1.4.1.789.1.3.1.3.1.1.17 counter32 read-only
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_WRITE (Write to File) procedure, since the last time the statistics were cleared.
                                 pclNfsV2Creates 1.3.6.1.4.1.789.1.3.1.3.1.1.18 counter32 read-only
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_CREATE (Create File) procedure, since the last time the statistics were cleared.
                                 pclNfsV2Removes 1.3.6.1.4.1.789.1.3.1.3.1.1.19 counter32 read-only
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_REMOVE (Remove File) procedure, since the last time the statistics were cleared.
                                 pclNfsV2Renames 1.3.6.1.4.1.789.1.3.1.3.1.1.20 counter32 read-only
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_RENAME (Rename File) procedure, since the last time the statistics were cleared.
                                 pclNfsV2Links 1.3.6.1.4.1.789.1.3.1.3.1.1.21 counter32 read-only
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_LINK (Create Link to File) procedure, since the last time the statistics were cleared.
                                 pclNfsV2Symlinks 1.3.6.1.4.1.789.1.3.1.3.1.1.22 counter32 read-only
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_SYMLINK (Create Symbolic Link) procedure, since the last time the statistics were cleared.
                                 pclNfsV2Mkdirs 1.3.6.1.4.1.789.1.3.1.3.1.1.23 counter32 read-only
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_MKDIR (Create Directory) procedure, since the last time the statistics were cleared.
                                 pclNfsV2Rmdirs 1.3.6.1.4.1.789.1.3.1.3.1.1.24 counter32 read-only
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_RMDIR (Remove Directory) procedure, since the last time the statistics were cleared.
                                 pclNfsV2Readdirs 1.3.6.1.4.1.789.1.3.1.3.1.1.25 counter32 read-only
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_READDIR (Read From Directory) procedure, since the last time the statistics were cleared.
                                 pclNfsV2Statfss 1.3.6.1.4.1.789.1.3.1.3.1.1.26 counter32 read-only
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_STATFS (Get Filesystem Attributes) procedure, since the last time the statistics were cleared.
                                 pclNfsV3Nulls 1.3.6.1.4.1.789.1.3.1.3.1.1.27 counter32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_NULL (Do Nothing) procedure, since the last time the statistics were cleared.
                                 pclNfsV3Getattrs 1.3.6.1.4.1.789.1.3.1.3.1.1.28 counter32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_GETATTR (Get File Attributes) procedure, since the last time the statistics were cleared.
                                 pclNfsV3Setattrs 1.3.6.1.4.1.789.1.3.1.3.1.1.29 counter32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_SETATTR (Set File Attributes) procedure, since the last time the statistics were cleared.
                                 pclNfsV3Lookups 1.3.6.1.4.1.789.1.3.1.3.1.1.30 counter32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_LOOKUP (Lookup Filename) procedure, since the last time the statistics were cleared.
                                 pclNfsV3Accesss 1.3.6.1.4.1.789.1.3.1.3.1.1.31 counter32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_ACCESS (Check Access Permission) procedure, since the last time the statistics were cleared.
                                 pclNfsV3Readlinks 1.3.6.1.4.1.789.1.3.1.3.1.1.32 counter32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, since the last time the statistics were cleared.
                                 pclNfsV3Reads 1.3.6.1.4.1.789.1.3.1.3.1.1.33 counter32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_READ (Read From File) procedure, since the last time the statistics were cleared.
                                 pclNfsV3Writes 1.3.6.1.4.1.789.1.3.1.3.1.1.34 counter32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_WRITE (Write to File) procedure, since the last time the statistics were cleared.
                                 pclNfsV3Creates 1.3.6.1.4.1.789.1.3.1.3.1.1.35 counter32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_CREATE (Create a File) procedure, since the last time the statistics were cleared.
                                 pclNfsV3Mkdirs 1.3.6.1.4.1.789.1.3.1.3.1.1.36 counter32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_MKDIR (Create a Directory) procedure, since the last time the statistics were cleared.
                                 pclNfsV3Symlinks 1.3.6.1.4.1.789.1.3.1.3.1.1.37 counter32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, since the last time the statistics were cleared.
                                 pclNfsV3Mknods 1.3.6.1.4.1.789.1.3.1.3.1.1.38 counter32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_MKNOD (Create a Special Device) procedure, since the last time the statistics were cleared.
                                 pclNfsV3Removes 1.3.6.1.4.1.789.1.3.1.3.1.1.39 counter32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_REMOVE (Remove a File) procedure, since the last time the statistics were cleared.
                                 pclNfsV3Rmdirs 1.3.6.1.4.1.789.1.3.1.3.1.1.40 counter32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_RMDIR (Remove a Directory) procedure, since the last time the statistics were cleared.
                                 pclNfsV3Renames 1.3.6.1.4.1.789.1.3.1.3.1.1.41 counter32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_RENAME (Rename a File or Directory) procedure, since the last time the statistics were cleared.
                                 pclNfsV3Links 1.3.6.1.4.1.789.1.3.1.3.1.1.42 counter32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_LINK (Create Link to an Object) procedure, since the last time the statistics were cleared.
                                 pclNfsV3Readdirs 1.3.6.1.4.1.789.1.3.1.3.1.1.43 counter32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_READDIR (Read From Directory) procedure, since the last time the statistics were cleared.
                                 pclNfsV3ReaddirPluss 1.3.6.1.4.1.789.1.3.1.3.1.1.44 counter32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_READDIRPLUS (Extended Read from Directory) procedure, since the last time the statistics were cleared.
                                 pclNfsV3Fsstats 1.3.6.1.4.1.789.1.3.1.3.1.1.45 counter32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, since the last time the statistics were cleared.
                                 pclNfsV3Fsinfos 1.3.6.1.4.1.789.1.3.1.3.1.1.46 counter32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_FSINFO (Get Static File System Information) procedure, since the last time the statistics were cleared.
                                 pclNfsV3Pathconfs 1.3.6.1.4.1.789.1.3.1.3.1.1.47 counter32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, since the last time the statistics were cleared.
                                 pclNfsV3Commits 1.3.6.1.4.1.789.1.3.1.3.1.1.48 counter32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, since the last time the statistics were cleared.
                                 pclPerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.49 integer32 read-only
The number of the total NFS calls for the referenced client as a percentage of the total NFS calls received from all clients, since the last time the statistics were cleared.
                                 pclNfsV2NullPerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.50 integer32 read-only
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_NULL (Do Nothing) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV2GetattrPerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.51 integer32 read-only
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_GETATTR (Get File Attributes) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV2SetattrPerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.52 integer32 read-only
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_SETATTR (Set File Attributes) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV2RootPerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.53 integer32 read-only
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_ROOT (Get Filesystem Root) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV2LookupPerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.54 integer32 read-only
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_LOOKUP (Look Up File Name) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV2ReadlinkPerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.55 integer32 read-only
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_READLINK (Read From Symbolic Link) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV2ReadPerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.56 integer32 read-only
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_READ (Read From File) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV2WrcachePerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.57 integer32 read-only
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_WRITECACHE (Write to Cache) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV2WritePerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.58 integer32 read-only
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_WRITE (Write to File) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV2CreatePerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.59 integer32 read-only
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_CREATE (Create File) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV2RemovePerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.60 integer32 read-only
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_REMOVE (Remove File) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV2RenamePerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.61 integer32 read-only
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_RENAME (Rename File) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV2LinkPerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.62 integer32 read-only
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_LINK (Create Link to File) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV2SymlinkPerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.63 integer32 read-only
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_SYMLINK (Create Symbolic Link) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV2MkdirPerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.64 integer32 read-only
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_MKDIR (Create Directory) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV2RmdirPerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.65 integer32 read-only
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_RMDIR (Remove Directory) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV2ReaddirPerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.66 integer32 read-only
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_READDIR (Read From Directory) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV2StatfsPerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.67 integer32 read-only
The number of NFS Version 2 calls received from the referenced client for the NFSPROC_STATFS (Get Filesystem Attributes) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV3NullPerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.68 integer32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_NULL (Do Nothing) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV3GetattrPerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.69 integer32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_GETATTR (Get File Attributes) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV3SetattrPerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.70 integer32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_SETATTR (Set File Attributes) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV3LookupPerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.71 integer32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_LOOKUP (Lookup Filename) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV3AccessPerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.72 integer32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_ACCESS (Check Access Permission) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV3ReadlinkPerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.73 integer32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV3ReadPerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.74 integer32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_READ (Read From File) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV3WritePerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.75 integer32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_WRITE (Write to File) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV3CreatePerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.76 integer32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_CREATE (Create a File) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV3MkdirPerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.77 integer32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_MKDIR (Create a Directory) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV3SymlinkPerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.78 integer32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV3MknodPerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.79 integer32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_MKNOD (Create a Special Device) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV3RemovePerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.80 integer32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_REMOVE (Remove a File) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV3RmdirPerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.81 integer32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_RMDIR (Remove a Directory) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV3RenamePerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.82 integer32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_RENAME (Rename a File or Directory) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV3LinkPerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.83 integer32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_LINK (Create Link to an Object) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV3ReaddirPerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.84 integer32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_READDIR (Read From Directory) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV3ReaddirPlusPerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.85 integer32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_READDIRPLUS (Extended Read from Directory) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV3FsstatPerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.86 integer32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV3FsinfoPerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.87 integer32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_FSINFO (Get Static File System Information) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV3PathconfPerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.88 integer32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV3CommitPerCent 1.3.6.1.4.1.789.1.3.1.3.1.1.89 integer32 read-only
The number of NFS Version 3 calls received from the referenced client for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, as a percentage of the total calls received from this client, since the last time the statistics were cleared.
                                 pclNfsV2Read512Calls 1.3.6.1.4.1.789.1.3.1.3.1.1.90 counter32 read-only
The number of NFS Version 2 read calls with request sizes between 0-511 bytes received from this client.
                                 pclNfsV2Read1KCalls 1.3.6.1.4.1.789.1.3.1.3.1.1.91 counter32 read-only
The number of NFS Version 2 read calls with request sizes between 512-1023 bytes received from this client.
                                 pclNfsV2Read2KCalls 1.3.6.1.4.1.789.1.3.1.3.1.1.92 counter32 read-only
The number of NFS Version 2 read calls with request sizes between 1K-2047 bytes received from this client.
                                 pclNfsV2Read4KCalls 1.3.6.1.4.1.789.1.3.1.3.1.1.93 counter32 read-only
The number of NFS Version 2 read calls with request sizes between 2K-4095 bytes received from this client.
                                 pclNfsV2Read8KCalls 1.3.6.1.4.1.789.1.3.1.3.1.1.94 counter32 read-only
The number of NFS Version 2 read calls with request sizes between 4K-8191 bytes received from this client.
                                 pclNfsV2Read16KCalls 1.3.6.1.4.1.789.1.3.1.3.1.1.95 counter32 read-only
The number of NFS Version 2 read calls with request sizes between 8K-16383 bytes received from this client.
                                 pclNfsV2Read32KCalls 1.3.6.1.4.1.789.1.3.1.3.1.1.96 counter32 read-only
The number of NFS Version 2 read calls with request sizes between 16K-32767 bytes received from this client.
                                 pclNfsV2Read64KCalls 1.3.6.1.4.1.789.1.3.1.3.1.1.97 counter32 read-only
The number of NFS Version 2 read calls with request sizes between 32K-65535 bytes received from this client.
                                 pclNfsV2Read128KCalls 1.3.6.1.4.1.789.1.3.1.3.1.1.98 counter32 read-only
The number of NFS Version 2 read calls with request sizes between 64K-131071 bytes received from this client.
                                 pclNfsV2Write512Calls 1.3.6.1.4.1.789.1.3.1.3.1.1.99 counter32 read-only
The number of NFS Version 2 write calls with request sizes between 0-511 bytes received from this client.
                                 pclNfsV2Write1KCalls 1.3.6.1.4.1.789.1.3.1.3.1.1.100 counter32 read-only
The number of NFS Version 2 write calls with request sizes between 512-1023 bytes received from this client.
                                 pclNfsV2Write2KCalls 1.3.6.1.4.1.789.1.3.1.3.1.1.101 counter32 read-only
The number of NFS Version 2 write calls with request sizes between 1K-2047 bytes received from this client.
                                 pclNfsV2Write4KCalls 1.3.6.1.4.1.789.1.3.1.3.1.1.102 counter32 read-only
The number of NFS Version 2 write calls with request sizes between 2K-4095 bytes received from this client.
                                 pclNfsV2Write8KCalls 1.3.6.1.4.1.789.1.3.1.3.1.1.103 counter32 read-only
The number of NFS Version 2 write calls with request sizes between 4K-8191 bytes received from this client.
                                 pclNfsV2Write16KCalls 1.3.6.1.4.1.789.1.3.1.3.1.1.104 counter32 read-only
The number of NFS Version 2 write calls with request sizes between 8K-16383 bytes received from this client.
                                 pclNfsV2Write32KCalls 1.3.6.1.4.1.789.1.3.1.3.1.1.105 counter32 read-only
The number of NFS Version 2 write calls with request sizes between 16K-32767 bytes received from this client.
                                 pclNfsV2Write64KCalls 1.3.6.1.4.1.789.1.3.1.3.1.1.106 counter32 read-only
The number of NFS Version 2 write calls with request sizes between 32K-65535 bytes received from this client.
                                 pclNfsV2Write128KCalls 1.3.6.1.4.1.789.1.3.1.3.1.1.107 counter32 read-only
The number of NFS Version 2 write calls with request sizes between 64K-131071 bytes received from this client.
                                 pclNfsV3Read512Calls 1.3.6.1.4.1.789.1.3.1.3.1.1.108 counter32 read-only
The number of NFS Version 3 read calls with request sizes between 0-511 bytes received from this client.
                                 pclNfsV3Read1KCalls 1.3.6.1.4.1.789.1.3.1.3.1.1.109 counter32 read-only
The number of NFS Version 3 read calls with request sizes between 512-1023 bytes received from this client.
                                 pclNfsV3Read2KCalls 1.3.6.1.4.1.789.1.3.1.3.1.1.110 counter32 read-only
The number of NFS Version 3 read calls with request sizes between 1K-2047 bytes received from this client.
                                 pclNfsV3Read4KCalls 1.3.6.1.4.1.789.1.3.1.3.1.1.111 counter32 read-only
The number of NFS Version 3 read calls with request sizes between 2K-4095 bytes received from this client.
                                 pclNfsV3Read8KCalls 1.3.6.1.4.1.789.1.3.1.3.1.1.112 counter32 read-only
The number of NFS Version 3 read calls with request sizes between 4K-8191 bytes received from this client.
                                 pclNfsV3Read16KCalls 1.3.6.1.4.1.789.1.3.1.3.1.1.113 counter32 read-only
The number of NFS Version 3 read calls with request sizes between 8K-16383 bytes received from this client.
                                 pclNfsV3Read32KCalls 1.3.6.1.4.1.789.1.3.1.3.1.1.114 counter32 read-only
The number of NFS Version 3 read calls with request sizes between 16K-32767 bytes received from this client.
                                 pclNfsV3Read64KCalls 1.3.6.1.4.1.789.1.3.1.3.1.1.115 counter32 read-only
The number of NFS Version 3 read calls with request sizes between 32K-65535 bytes received from this client.
                                 pclNfsV3Read128KCalls 1.3.6.1.4.1.789.1.3.1.3.1.1.116 counter32 read-only
The number of NFS Version 3 read calls with request sizes between 64K-131071 bytes received from this client.
                                 pclNfsV3Write512Calls 1.3.6.1.4.1.789.1.3.1.3.1.1.117 counter32 read-only
The number of NFS Version 3 write calls with request sizes between 0-511 bytes received from this client.
                                 pclNfsV3Write1KCalls 1.3.6.1.4.1.789.1.3.1.3.1.1.118 counter32 read-only
The number of NFS Version 3 write calls with request sizes between 512-1023 bytes received from this client.
                                 pclNfsV3Write2KCalls 1.3.6.1.4.1.789.1.3.1.3.1.1.119 counter32 read-only
The number of NFS Version 3 write calls with request sizes between 1K-2047 bytes received from this client.
                                 pclNfsV3Write4KCalls 1.3.6.1.4.1.789.1.3.1.3.1.1.120 counter32 read-only
The number of NFS Version 3 write calls with request sizes between 2K-4095 bytes received from this client.
                                 pclNfsV3Write8KCalls 1.3.6.1.4.1.789.1.3.1.3.1.1.121 counter32 read-only
The number of NFS Version 3 write calls with request sizes between 4K-8191 bytes received from this client.
                                 pclNfsV3Write16KCalls 1.3.6.1.4.1.789.1.3.1.3.1.1.122 counter32 read-only
The number of NFS Version 3 write calls with request sizes between 8K-16383 bytes received from this client.
                                 pclNfsV3Write32KCalls 1.3.6.1.4.1.789.1.3.1.3.1.1.123 counter32 read-only
The number of NFS Version 3 write calls with request sizes between 16K-32767 bytes received from this client.
                                 pclNfsV3Write64KCalls 1.3.6.1.4.1.789.1.3.1.3.1.1.124 counter32 read-only
The number of NFS Version 3 write calls with request sizes between 32K-65535 bytes received from this client.
                                 pclNfsV3Write128KCalls 1.3.6.1.4.1.789.1.3.1.3.1.1.125 counter32 read-only
The number of NFS Version 3 write calls with request sizes between 64K-131071 bytes received from this client.
                         pclNumber 1.3.6.1.4.1.789.1.3.1.3.2 integer32 read-only
Number of entries in the pclTable table.
                 totNfs 1.3.6.1.4.1.789.1.3.2
                     trpcServ 1.3.6.1.4.1.789.1.3.2.1
                         trpcCalls 1.3.6.1.4.1.789.1.3.2.1.1 counter32 read-only
The total number of RPC calls received, since the last boot.
                         trpcBadCalls 1.3.6.1.4.1.789.1.3.2.1.2 counter32 read-only
The total number of calls rejected by the RPC layer, since the last boot.
                         trpcNullRecvs 1.3.6.1.4.1.789.1.3.2.1.3 counter32 read-only
The number of times an RPC call was not available when it was thought to be received, since the last boot.
                         trpcBadLens 1.3.6.1.4.1.789.1.3.2.1.4 counter32 read-only
The number of RPC calls received with a length shorter than a minimum-sized RPC call, since the last boot.
                         trpcServXDRCalls 1.3.6.1.4.1.789.1.3.2.1.5 counter32 read-only
The number of RPC calls received whose header could not be XDR decoded, since the last boot.
                     tnfsServ 1.3.6.1.4.1.789.1.3.2.2
                         tnfsCalls 1.3.6.1.4.1.789.1.3.2.2.1 counter32 read-only
The total number of NFS calls received, since last boot.
                         tnfsServBadCalls 1.3.6.1.4.1.789.1.3.2.2.2 counter32 read-only
The total number of received NFS calls rejected, since last boot.
                         tnfsV2 1.3.6.1.4.1.789.1.3.2.2.3
                             tv2Calls 1.3.6.1.4.1.789.1.3.2.2.3.1
                                 tv2cNulls 1.3.6.1.4.1.789.1.3.2.2.3.1.1 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_NULL (Do Nothing) procedure, since the last boot.
                                 tv2cGetattrs 1.3.6.1.4.1.789.1.3.2.2.3.1.2 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_GETATTR (Get File Attributes) procedure, since the last boot.
                                 tv2cSetattrs 1.3.6.1.4.1.789.1.3.2.2.3.1.3 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_SETATTR (Set File Attributes) procedure, since the the last boot.
                                 tv2cRoots 1.3.6.1.4.1.789.1.3.2.2.3.1.4 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_ROOT (Get Filesystem Root) procedure, since the last boot.
                                 tv2cLookups 1.3.6.1.4.1.789.1.3.2.2.3.1.5 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_LOOKUP (Look Up File Name) procedure, since the last boot.
                                 tv2cReadlinks 1.3.6.1.4.1.789.1.3.2.2.3.1.6 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_READLINK (Read From Symbolic Link) procedure, since the last boot.
                                 tv2cReads 1.3.6.1.4.1.789.1.3.2.2.3.1.7 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_READ (Read From File) procedure, since the last boot.
                                 tv2cWrcaches 1.3.6.1.4.1.789.1.3.2.2.3.1.8 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_WRITECACHE (Write to Cache) procedure, since the last boot.
                                 tv2cWrites 1.3.6.1.4.1.789.1.3.2.2.3.1.9 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_WRITE (Write to File) procedure, since the last boot.
                                 tv2cCreates 1.3.6.1.4.1.789.1.3.2.2.3.1.10 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_CREATE (Create File) procedure, since the last boot.
                                 tv2cRemoves 1.3.6.1.4.1.789.1.3.2.2.3.1.11 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_REMOVE (Remove File) procedure, since the last boot.
                                 tv2cRenames 1.3.6.1.4.1.789.1.3.2.2.3.1.12 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_RENAME (Rename File) procedure, since the last boot.
                                 tv2cLinks 1.3.6.1.4.1.789.1.3.2.2.3.1.13 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_LINK (Create Link to File) procedure, since the last boot.
                                 tv2cSymlinks 1.3.6.1.4.1.789.1.3.2.2.3.1.14 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_SYMLINK (Create Symbolic Link) procedure, since the last boot.
                                 tv2cMkdirs 1.3.6.1.4.1.789.1.3.2.2.3.1.15 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_MKDIR (Create Directory) procedure, since the last boot.
                                 tv2cRmdirs 1.3.6.1.4.1.789.1.3.2.2.3.1.16 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_RMDIR (Remove Directory) procedure, since the last boot.
                                 tv2cReaddirs 1.3.6.1.4.1.789.1.3.2.2.3.1.17 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_READDIR (Read From Directory) procedure, since the last boot.
                                 tv2cStatfss 1.3.6.1.4.1.789.1.3.2.2.3.1.18 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_STATFS (Get Filesystem Attributes) procedure, since the last boot.
                             tv2Percent 1.3.6.1.4.1.789.1.3.2.2.3.2
                                 tv2pNulls 1.3.6.1.4.1.789.1.3.2.2.3.2.1 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_NULL (Do Nothing) procedure as a percentage of total NFS calls received, since the last boot.
                                 tv2pGetattrs 1.3.6.1.4.1.789.1.3.2.2.3.2.2 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_GETATTR (Get File Attributes) procedure as a percentage of total NFS calls received, since the last boot.
                                 tv2pSetattrs 1.3.6.1.4.1.789.1.3.2.2.3.2.3 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_SETATTR (Set File Attributes) procedure as a percentage of total NFS calls received, since the last boot.
                                 tv2pRoots 1.3.6.1.4.1.789.1.3.2.2.3.2.4 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_ROOT (Get Filesystem Root) procedure as a percentage of total NFS calls received, since the last boot.
                                 tv2pLookups 1.3.6.1.4.1.789.1.3.2.2.3.2.5 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_LOOKUP (Look Up File Name) procedure as a percentage of total NFS calls received, since the last boot.
                                 tv2pReadlinks 1.3.6.1.4.1.789.1.3.2.2.3.2.6 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_READLINK (Read From Symbolic Link) procedure as a percentage of total NFS calls received, since the last boot.
                                 tv2pReads 1.3.6.1.4.1.789.1.3.2.2.3.2.7 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_READ (Read From File) procedure as a percentage of total NFS calls received, since the last boot.
                                 tv2pWrcaches 1.3.6.1.4.1.789.1.3.2.2.3.2.8 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_WRITECACHE (Write to Cache) procedure as a percentage of total NFS calls received, since the last boot.
                                 tv2pWrites 1.3.6.1.4.1.789.1.3.2.2.3.2.9 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_WRITE (Write to File) procedure as a percentage of total NFS calls received, since the last boot.
                                 tv2pCreates 1.3.6.1.4.1.789.1.3.2.2.3.2.10 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_CREATE (Create File) procedure as a percentage of total NFS calls received, since the last boot.
                                 tv2pRemoves 1.3.6.1.4.1.789.1.3.2.2.3.2.11 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_REMOVE (Remove File) procedure as a percentage of total NFS calls received, since the last boot.
                                 tv2pRenames 1.3.6.1.4.1.789.1.3.2.2.3.2.12 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_RENAME (Rename File) procedure as a percentage of total NFS calls received, since the last boot.
                                 tv2pLinks 1.3.6.1.4.1.789.1.3.2.2.3.2.13 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_LINK (Create Link to File) procedure as a percentage of total NFS calls received, since the last boot.
                                 tv2pSymlinks 1.3.6.1.4.1.789.1.3.2.2.3.2.14 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_SYMLINK (Create Symbolic Link) procedure as a percentage of total NFS calls received, since the last boot.
                                 tv2pMkdirs 1.3.6.1.4.1.789.1.3.2.2.3.2.15 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_MKDIR (Create Directory) procedure as a percentage of total NFS calls received, since the last boot.
                                 tv2pRmdirs 1.3.6.1.4.1.789.1.3.2.2.3.2.16 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_RMDIR (Remove Directory) procedure as a percentage of total NFS calls received, since the last boot.
                                 tv2pReaddirs 1.3.6.1.4.1.789.1.3.2.2.3.2.17 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_READDIR (Read From Directory) procedure as a percentage of total NFS calls received, since the last boot.
                                 tv2pStatfss 1.3.6.1.4.1.789.1.3.2.2.3.2.18 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_STATFS (Get Filesystem Attributes) procedure as a percentage of total NFS calls received, since the last boot.
                             tv2CachedCalls 1.3.6.1.4.1.789.1.3.2.2.3.3
                                 tv2ccNulls 1.3.6.1.4.1.789.1.3.2.2.3.3.1 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_NULL (Do Nothing) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv2ccGetattrs 1.3.6.1.4.1.789.1.3.2.2.3.3.2 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_GETATTR (Get File Attributes) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv2ccSetattrs 1.3.6.1.4.1.789.1.3.2.2.3.3.3 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_SETATTR (Set File Attributes) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv2ccRoots 1.3.6.1.4.1.789.1.3.2.2.3.3.4 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_ROOT (Get Filesystem Root) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv2ccLookups 1.3.6.1.4.1.789.1.3.2.2.3.3.5 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_LOOKUP (Look Up File Name) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv2ccReadlinks 1.3.6.1.4.1.789.1.3.2.2.3.3.6 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_READLINK (Read From Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv2ccReads 1.3.6.1.4.1.789.1.3.2.2.3.3.7 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_READ (Read From File) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv2ccWrcaches 1.3.6.1.4.1.789.1.3.2.2.3.3.8 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_WRITECACHE (Write to Cache) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv2ccWrites 1.3.6.1.4.1.789.1.3.2.2.3.3.9 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_WRITE (Write to File) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv2ccCreates 1.3.6.1.4.1.789.1.3.2.2.3.3.10 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_CREATE (Create File) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv2ccRemoves 1.3.6.1.4.1.789.1.3.2.2.3.3.11 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_REMOVE (Remove File) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv2ccRenames 1.3.6.1.4.1.789.1.3.2.2.3.3.12 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_RENAME (Rename File) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv2ccLinks 1.3.6.1.4.1.789.1.3.2.2.3.3.13 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_LINK (Create Link to File) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv2ccSymlinks 1.3.6.1.4.1.789.1.3.2.2.3.3.14 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_SYMLINK (Create Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv2ccMkdirs 1.3.6.1.4.1.789.1.3.2.2.3.3.15 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_MKDIR (Create Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv2ccRmdirs 1.3.6.1.4.1.789.1.3.2.2.3.3.16 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_RMDIR (Remove Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv2ccReaddirs 1.3.6.1.4.1.789.1.3.2.2.3.3.17 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_READDIR (Read From Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv2ccStatfss 1.3.6.1.4.1.789.1.3.2.2.3.3.18 counter32 read-only
The number of NFS Version 2 calls received for the NFSPROC_STATFS (Get Filesystem Attributes) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                             tv2CachedPerCent 1.3.6.1.4.1.789.1.3.2.2.3.4
                                 tv2cpNulls 1.3.6.1.4.1.789.1.3.2.2.3.4.1 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_NULL (Do Nothing) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                                 tv2cpGetattrs 1.3.6.1.4.1.789.1.3.2.2.3.4.2 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_GETATTR (Get File Attributes) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                                 tv2cpSetattrs 1.3.6.1.4.1.789.1.3.2.2.3.4.3 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_SETATTR (Set File Attributes) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                                 tv2cpRoots 1.3.6.1.4.1.789.1.3.2.2.3.4.4 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_ROOT (Get Filesystem Root) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                                 tv2cpLookups 1.3.6.1.4.1.789.1.3.2.2.3.4.5 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_LOOKUP (Look Up File Name) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                                 tv2cpReadlinks 1.3.6.1.4.1.789.1.3.2.2.3.4.6 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_READLINK (Read From Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                                 tv2cpReads 1.3.6.1.4.1.789.1.3.2.2.3.4.7 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_READ (Read From File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                                 tv2cpWrcaches 1.3.6.1.4.1.789.1.3.2.2.3.4.8 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_WRITECACHE (Write to Cache) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                                 tv2cpWrites 1.3.6.1.4.1.789.1.3.2.2.3.4.9 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_WRITE (Write to File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                                 tv2cpCreates 1.3.6.1.4.1.789.1.3.2.2.3.4.10 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_CREATE (Create File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                                 tv2cpRemoves 1.3.6.1.4.1.789.1.3.2.2.3.4.11 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_REMOVE (Remove File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                                 tv2cpRenames 1.3.6.1.4.1.789.1.3.2.2.3.4.12 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_RENAME (Rename File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                                 tv2cpLinks 1.3.6.1.4.1.789.1.3.2.2.3.4.13 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_LINK (Create Link to File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                                 tv2cpSymlinks 1.3.6.1.4.1.789.1.3.2.2.3.4.14 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_SYMLINK (Create Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                                 tv2cpMkdirs 1.3.6.1.4.1.789.1.3.2.2.3.4.15 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_MKDIR (Create Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                                 tv2cpRmdirs 1.3.6.1.4.1.789.1.3.2.2.3.4.16 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_RMDIR (Remove Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                                 tv2cpReaddirs 1.3.6.1.4.1.789.1.3.2.2.3.4.17 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_READDIR (Read From Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                                 tv2cpStatfss 1.3.6.1.4.1.789.1.3.2.2.3.4.18 integer32 read-only
The number of NFS Version 2 calls received for the NFSPROC_STATFS (Get Filesystem Attributes) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                         tnfsV3 1.3.6.1.4.1.789.1.3.2.2.4
                             tv3Calls 1.3.6.1.4.1.789.1.3.2.2.4.1
                                 tv3cNulls 1.3.6.1.4.1.789.1.3.2.2.4.1.1 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_NULL (Do Nothing) procedure, since the last boot.
                                 tv3cGetattrs 1.3.6.1.4.1.789.1.3.2.2.4.1.2 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_GETATTR (Get File Attributes) procedure, since the last boot.
                                 tv3cSetattrs 1.3.6.1.4.1.789.1.3.2.2.4.1.3 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_SETATTR (Set File Attributes) procedure, since the last boot.
                                 tv3cLookups 1.3.6.1.4.1.789.1.3.2.2.4.1.4 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_LOOKUP (Lookup Filename) procedure, since the last boot.
                                 tv3cAccesss 1.3.6.1.4.1.789.1.3.2.2.4.1.5 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_ACCESS (Check Access Permission) procedure, since the last boot.
                                 tv3cReadlinks 1.3.6.1.4.1.789.1.3.2.2.4.1.6 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, since the last boot.
                                 tv3cReads 1.3.6.1.4.1.789.1.3.2.2.4.1.7 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_READ (Read From File) procedure, since the last boot.
                                 tv3cWrites 1.3.6.1.4.1.789.1.3.2.2.4.1.8 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_WRITE (Write to File) procedure, since the last boot.
                                 tv3cCreates 1.3.6.1.4.1.789.1.3.2.2.4.1.9 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_CREATE (Create a File) procedure, since the last boot.
                                 tv3cMkdirs 1.3.6.1.4.1.789.1.3.2.2.4.1.10 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_MKDIR (Create a Directory) procedure, since the last boot.
                                 tv3cSymlinks 1.3.6.1.4.1.789.1.3.2.2.4.1.11 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, since the last boot.
                                 tv3cMknods 1.3.6.1.4.1.789.1.3.2.2.4.1.12 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_MKNOD (Create a Special Device) procedure, since the last boot.
                                 tv3cRemoves 1.3.6.1.4.1.789.1.3.2.2.4.1.13 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_REMOVE (Remove a File) procedure, since the last boot.
                                 tv3cRmdirs 1.3.6.1.4.1.789.1.3.2.2.4.1.14 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_RMDIR (Remove a Directory) procedure, since the last boot.
                                 tv3cRenames 1.3.6.1.4.1.789.1.3.2.2.4.1.15 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_RENAME (Rename a File or Directory) procedure, since the last boot.
                                 tv3cLinks 1.3.6.1.4.1.789.1.3.2.2.4.1.16 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_LINK (Create Link to an Object) procedure, since the last boot.
                                 tv3cReaddirs 1.3.6.1.4.1.789.1.3.2.2.4.1.17 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_READDIR (Read From Directory) procedure, since the last boot.
                                 tv3cReaddirPluss 1.3.6.1.4.1.789.1.3.2.2.4.1.18 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_READDIRPLUS (Extended Read from Directory) procedure, since the last boot.
                                 tv3cFsstats 1.3.6.1.4.1.789.1.3.2.2.4.1.19 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, since the last boot.
                                 tv3cFsinfos 1.3.6.1.4.1.789.1.3.2.2.4.1.20 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_FSINFO (Get Static File System Information) procedure, since the last boot.
                                 tv3cPathconfs 1.3.6.1.4.1.789.1.3.2.2.4.1.21 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, since the last boot.
                                 tv3cCommits 1.3.6.1.4.1.789.1.3.2.2.4.1.22 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, since the last boot.
                             tv3Percent 1.3.6.1.4.1.789.1.3.2.2.4.2
                                 tv3pNulls 1.3.6.1.4.1.789.1.3.2.2.4.2.1 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_NULL (Do Nothing) procedure, as a percentage of the total NFS calls received, since the last boot.
                                 tv3pGetattrs 1.3.6.1.4.1.789.1.3.2.2.4.2.2 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_GETATTR (Get File Attributes) procedure, as a percentage of the total NFS calls received, since the last boot.
                                 tv3pSetattrs 1.3.6.1.4.1.789.1.3.2.2.4.2.3 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_SETATTR (Set File Attributes) procedure, as a percentage of the total NFS calls received, since the last boot.
                                 tv3pLookups 1.3.6.1.4.1.789.1.3.2.2.4.2.4 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_LOOKUP (Lookup Filename) procedure, as a percentage of the total NFS calls received, since the last boot.
                                 tv3pAccesss 1.3.6.1.4.1.789.1.3.2.2.4.2.5 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_ACCESS (Check Access Permission) procedure, as a percentage of the total NFS calls received, since the last boot.
                                 tv3pReadlinks 1.3.6.1.4.1.789.1.3.2.2.4.2.6 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, as a percentage of the total NFS calls received, since the last boot.
                                 tv3pReads 1.3.6.1.4.1.789.1.3.2.2.4.2.7 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_READ (Read From File) procedure, as a percentage of the total NFS calls received, since the last boot.
                                 tv3pWrites 1.3.6.1.4.1.789.1.3.2.2.4.2.8 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_WRITE (Write to File) procedure, as a percentage of the total NFS calls received, since the last boot.
                                 tv3pCreates 1.3.6.1.4.1.789.1.3.2.2.4.2.9 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_CREATE (Create a File) procedure, as a percentage of the total NFS calls received, since the last boot.
                                 tv3pMkdirs 1.3.6.1.4.1.789.1.3.2.2.4.2.10 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_MKDIR (Create a Directory) procedure, as a percentage of the total NFS calls received, since the last boot.
                                 tv3pSymlinks 1.3.6.1.4.1.789.1.3.2.2.4.2.11 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, as a percentage of the total NFS calls received, since the last boot.
                                 tv3pMknods 1.3.6.1.4.1.789.1.3.2.2.4.2.12 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_MKNOD (Create a Special Device) procedure, as a percentage of the total NFS calls received, since the last boot.
                                 tv3pRemoves 1.3.6.1.4.1.789.1.3.2.2.4.2.13 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_REMOVE (Remove a File) procedure, as a percentage of the total NFS calls received, since the last boot.
                                 tv3pRmdirs 1.3.6.1.4.1.789.1.3.2.2.4.2.14 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_RMDIR (Remove a Directory) procedure, as a percentage of the total NFS calls received, since the last boot.
                                 tv3pRenames 1.3.6.1.4.1.789.1.3.2.2.4.2.15 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_RENAME (Rename a File or Directory) procedure, as a percentage of the total NFS calls received, since the last boot.
                                 tv3pLinks 1.3.6.1.4.1.789.1.3.2.2.4.2.16 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_LINK (Create Link to an Object) procedure, as a percentage of the total NFS calls received, since the last boot.
                                 tv3pReaddirs 1.3.6.1.4.1.789.1.3.2.2.4.2.17 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_READDIR (Read From Directory) procedure, as a percentage of the total NFS calls received, since the last boot.
                                 tv3pReaddirPluss 1.3.6.1.4.1.789.1.3.2.2.4.2.18 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_READDIRPLUS (Extended Read from Directory) procedure, as a percentage of the total NFS calls received, since the last boot.
                                 tv3pFsstats 1.3.6.1.4.1.789.1.3.2.2.4.2.19 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, as a percentage of the total NFS calls received, since the last boot.
                                 tv3pFsinfos 1.3.6.1.4.1.789.1.3.2.2.4.2.20 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_FSINFO (Get Static File System Information) procedure, as a percentage of the total NFS calls received, since the last boot.
                                 tv3pPathconfs 1.3.6.1.4.1.789.1.3.2.2.4.2.21 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, as a percentage of the total NFS calls received, since the last boot.
                                 tv3pCommits 1.3.6.1.4.1.789.1.3.2.2.4.2.22 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, as a percentage of the total NFS calls received, since the last boot.
                             tv3CachedCalls 1.3.6.1.4.1.789.1.3.2.2.4.3
                                 tv3ccNulls 1.3.6.1.4.1.789.1.3.2.2.4.3.1 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_NULL (Do Nothing) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv3ccGetattrs 1.3.6.1.4.1.789.1.3.2.2.4.3.2 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_GETATTR (Get File Attributes) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv3ccSetattrs 1.3.6.1.4.1.789.1.3.2.2.4.3.3 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_SETATTR (Set File Attributes) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv3ccLookups 1.3.6.1.4.1.789.1.3.2.2.4.3.4 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_LOOKUP (Lookup Filename) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv3ccAccesss 1.3.6.1.4.1.789.1.3.2.2.4.3.5 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_ACCESS (Check Access Permission) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv3ccReadlinks 1.3.6.1.4.1.789.1.3.2.2.4.3.6 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv3ccReads 1.3.6.1.4.1.789.1.3.2.2.4.3.7 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_READ (Read From File) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv3ccWrites 1.3.6.1.4.1.789.1.3.2.2.4.3.8 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_WRITE (Write to File) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv3ccCreates 1.3.6.1.4.1.789.1.3.2.2.4.3.9 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_CREATE (Create a File) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv3ccMkdirs 1.3.6.1.4.1.789.1.3.2.2.4.3.10 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_MKDIR (Create a Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv3ccSymlinks 1.3.6.1.4.1.789.1.3.2.2.4.3.11 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv3ccMknods 1.3.6.1.4.1.789.1.3.2.2.4.3.12 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_MKNOD (Create a Special Device) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv3ccRemoves 1.3.6.1.4.1.789.1.3.2.2.4.3.13 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_REMOVE (Remove a File) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv3ccRmdirs 1.3.6.1.4.1.789.1.3.2.2.4.3.14 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_RMDIR (Remove a Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv3ccRenames 1.3.6.1.4.1.789.1.3.2.2.4.3.15 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_RENAME (Rename a File or Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv3ccLinks 1.3.6.1.4.1.789.1.3.2.2.4.3.16 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_LINK (Create Link to an Object) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv3ccReaddirs 1.3.6.1.4.1.789.1.3.2.2.4.3.17 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_READDIR (Read From Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv3ccReaddirPluss 1.3.6.1.4.1.789.1.3.2.2.4.3.18 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_READDIRPLUS (Extended Read from Directory) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv3ccFsstats 1.3.6.1.4.1.789.1.3.2.2.4.3.19 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv3ccFsinfos 1.3.6.1.4.1.789.1.3.2.2.4.3.20 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_FSINFO (Get Static File System Information) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv3ccPathconfs 1.3.6.1.4.1.789.1.3.2.2.4.3.21 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                                 tv3ccCommits 1.3.6.1.4.1.789.1.3.2.2.4.3.22 counter32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, that did not result in the filesystem blocking to read from disk, since the last boot.
                             tv3CachedPerCent 1.3.6.1.4.1.789.1.3.2.2.4.4
                                 tv3cpNulls 1.3.6.1.4.1.789.1.3.2.2.4.4.1 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_NULL (Do Nothing) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                                 tv3cpGetattrs 1.3.6.1.4.1.789.1.3.2.2.4.4.2 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_GETATTR (Get File Attributes) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                                 tv3cpSetattrs 1.3.6.1.4.1.789.1.3.2.2.4.4.3 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_SETATTR (Set File Attributes) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                                 tv3cpLookups 1.3.6.1.4.1.789.1.3.2.2.4.4.4 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_LOOKUP (Lookup Filename) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                                 tv3cpAccesss 1.3.6.1.4.1.789.1.3.2.2.4.4.5 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_ACCESS (Check Access Permission) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                                 tv3cpReadlinks 1.3.6.1.4.1.789.1.3.2.2.4.4.6 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_READLINK (Read from Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last last boot.
                                 tv3cpReads 1.3.6.1.4.1.789.1.3.2.2.4.4.7 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_READ (Read From File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                                 tv3cpWrites 1.3.6.1.4.1.789.1.3.2.2.4.4.8 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_WRITE (Write to File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                                 tv3cpCreates 1.3.6.1.4.1.789.1.3.2.2.4.4.9 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_CREATE (Create a File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                                 tv3cpMkdirs 1.3.6.1.4.1.789.1.3.2.2.4.4.10 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_MKDIR (Create a Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                                 tv3cpSymlinks 1.3.6.1.4.1.789.1.3.2.2.4.4.11 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_SYMLINK (Create a Symbolic Link) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                                 tv3cpMknods 1.3.6.1.4.1.789.1.3.2.2.4.4.12 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_MKNOD (Create a Special Device) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                                 tv3cpRemoves 1.3.6.1.4.1.789.1.3.2.2.4.4.13 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_REMOVE (Remove a File) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                                 tv3cpRmdirs 1.3.6.1.4.1.789.1.3.2.2.4.4.14 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_RMDIR (Remove a Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                                 tv3cpRenames 1.3.6.1.4.1.789.1.3.2.2.4.4.15 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_RENAME (Rename a File or Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                                 tv3cpLinks 1.3.6.1.4.1.789.1.3.2.2.4.4.16 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_LINK (Create Link to an Object) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                                 tv3cpReaddirs 1.3.6.1.4.1.789.1.3.2.2.4.4.17 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_READDIR (Read From Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                                 tv3cpReaddirPluss 1.3.6.1.4.1.789.1.3.2.2.4.4.18 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_READIRPLUS (Extended Read from Directory) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                                 tv3cpFsstats 1.3.6.1.4.1.789.1.3.2.2.4.4.19 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_FSSTAT (Get Dynamic File System Information) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                                 tv3cpFsinfos 1.3.6.1.4.1.789.1.3.2.2.4.4.20 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_FSINFO (Get Static File System Information) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                                 tv3cpPathconfs 1.3.6.1.4.1.789.1.3.2.2.4.4.21 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_PATHCONF (Retrieve POSIX Information) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                                 tv3cpCommits 1.3.6.1.4.1.789.1.3.2.2.4.4.22 integer32 read-only
The number of NFS Version 3 calls received for the NFSPROC3_COMMIT (Commit Cached Data on a Server to Stable Storage) procedure, that did not result in the filesystem blocking to read from disk, as a percentage of the total number of calls received for this procedure, since the last boot.
                         treplyCache 1.3.6.1.4.1.789.1.3.2.2.5
                             trcInProgressHits 1.3.6.1.4.1.789.1.3.2.2.5.1 counter32 read-only
The number of NFS requests that were dropped, for calls already in progress, since the last boot.
                             trcDelayHits 1.3.6.1.4.1.789.1.3.2.2.5.2 counter32 read-only
The number of NFS requests that were dropped, for replies already generated within a short interval, since the last boot. These stats are deprecated. A value of zero will always be returned for these stats.
                             trcMisses 1.3.6.1.4.1.789.1.3.2.2.5.3 counter32 read-only
The number of NFS requests received for which there were no corresponding entries already in the Reply Cache, since the last boot.
                             trcNonIdemDoneHits 1.3.6.1.4.1.789.1.3.2.2.5.4 counter32 read-only
The number of NFS requests received that resulted in replies being replayed from the Reply Cache, since the last boot.
                             trcNonIdemNotDoneHits 1.3.6.1.4.1.789.1.3.2.2.5.5 counter32 read-only
The number of NFS requests received for calls that resulted in this request being processed as a new request even when a corresponding entry existed in the Reply Cache, since the last boot.
                             trcTcpInProgressHits 1.3.6.1.4.1.789.1.3.2.2.5.6 counter32 read-only
The number of NFS requests that were dropped for the TCP protocol, for calls already in progress, since the last boot.
                             trcTcpDelayHits 1.3.6.1.4.1.789.1.3.2.2.5.7 counter32 read-only
The number of NFS requests that were dropped for the TCP protocol, for replies already generated within a short interval, since the last boot. These stats are deprecated. A value of zero will always be returned for these stats.
                             trcTcpMisses 1.3.6.1.4.1.789.1.3.2.2.5.8 counter32 read-only
The number of NFS requests received for the TCP protocol for which there were no corresponding entries already in the Reply Cache, since the last boot.
                             trcTcpNonIdemDoneHits 1.3.6.1.4.1.789.1.3.2.2.5.9 counter32 read-only
The number of NFS requests received for the TCP protocol that resulted in replies being replayed from the Reply Cache, since the last boot.
                             trcTcpNonIdemNotDoneHits 1.3.6.1.4.1.789.1.3.2.2.5.10 counter32 read-only
The number of NFS requests received for the TCP protocol for calls that resulted in this request being processed as a new request even when a corresponding entry existed in the Reply Cache, since the last boot.
                             trcUdpInProgressHits 1.3.6.1.4.1.789.1.3.2.2.5.11 counter32 read-only
The number of NFS requests that were dropped for the UDP protocol, for calls already in progress, since the last boot.
                             trcUdpDelayHits 1.3.6.1.4.1.789.1.3.2.2.5.12 counter32 read-only
The number of NFS requests that were dropped for the UDP protocol, for replies already generated within a short interval, since the last boot. These stats are deprecated. A value of zero will always be returned for these stats.
                             trcUdpMisses 1.3.6.1.4.1.789.1.3.2.2.5.13 counter32 read-only
The number of NFS requests received for the UDP protocol for which there were no corresponding entries already in the Reply Cache, since the last boot.
                             trcUdpNonIdemDoneHits 1.3.6.1.4.1.789.1.3.2.2.5.14 counter32 read-only
The number of NFS requests received for the UDP protocol that resulted in replies being replayed from the Reply Cache, since the last boot.
                             trcUdpNonIdemNotDoneHits 1.3.6.1.4.1.789.1.3.2.2.5.15 counter32 read-only
The number of NFS requests received for the UDP protocol for calls that resulted in this request being processed as a new request even when a corresponding entry existed in the Reply Cache, since the last boot.
                         tnfsrwStats 1.3.6.1.4.1.789.1.3.2.2.6
                             tv2ReadStats 1.3.6.1.4.1.789.1.3.2.2.6.1
                                 tv2Read512Calls 1.3.6.1.4.1.789.1.3.2.2.6.1.1 counter32 read-only
The number of NFS Version 2 read calls received by the server since last boot with request sizes between 0-511 bytes.
                                 tv2Read1KCalls 1.3.6.1.4.1.789.1.3.2.2.6.1.2 counter32 read-only
The number of NFS Version 2 read calls received by the server since last boot with request sizes between 512-1023 bytes.
                                 tv2Read2KCalls 1.3.6.1.4.1.789.1.3.2.2.6.1.3 counter32 read-only
The number of NFS Version 2 read calls received by the server since last boot with request sizes between 1K-2047 bytes.
                                 tv2Read4KCalls 1.3.6.1.4.1.789.1.3.2.2.6.1.4 counter32 read-only
The number of NFS Version 2 read calls received by the server since last boot with request sizes between 2K-4095 bytes.
                                 tv2Read8KCalls 1.3.6.1.4.1.789.1.3.2.2.6.1.5 counter32 read-only
The number of NFS Version 2 read calls received by the server since last boot with request sizes between 4K-8191 bytes.
                                 tv2Read16KCalls 1.3.6.1.4.1.789.1.3.2.2.6.1.6 counter32 read-only
The number of NFS Version 2 read calls received by the server since last boot with request sizes between 8K-16383 bytes.
                                 tv2Read32KCalls 1.3.6.1.4.1.789.1.3.2.2.6.1.7 counter32 read-only
The number of NFS Version 2 read calls received by the server since last boot with request sizes between 16K-32767 bytes.
                                 tv2Read64KCalls 1.3.6.1.4.1.789.1.3.2.2.6.1.8 counter32 read-only
The number of NFS Version 2 read calls received by the server since last boot with request sizes between 32K-65535 bytes.
                                 tv2Read128KCalls 1.3.6.1.4.1.789.1.3.2.2.6.1.9 counter32 read-only
The number of NFS Version 2 read calls received by the server since last boot with request sizes between 64K-131071 bytes.
                             tv2WriteStats 1.3.6.1.4.1.789.1.3.2.2.6.2
                                 tv2Write512Calls 1.3.6.1.4.1.789.1.3.2.2.6.2.1 counter32 read-only
The number of NFS Version 2 write calls received by the server since last boot with request sizes between 0-511 bytes.
                                 tv2Write1KCalls 1.3.6.1.4.1.789.1.3.2.2.6.2.2 counter32 read-only
The number of NFS Version 2 write calls received by the server since last boot with request sizes between 512-1023 bytes.
                                 tv2Write2KCalls 1.3.6.1.4.1.789.1.3.2.2.6.2.3 counter32 read-only
The number of NFS Version 2 write calls received by the server since last boot with request sizes between 1K-2047 bytes.
                                 tv2Write4KCalls 1.3.6.1.4.1.789.1.3.2.2.6.2.4 counter32 read-only
The number of NFS Version 2 write calls received by the server since last boot with request sizes between 2K-4095 bytes.
                                 tv2Write8KCalls 1.3.6.1.4.1.789.1.3.2.2.6.2.5 counter32 read-only
The number of NFS Version 2 write calls received by the server since last boot with request sizes between 4K-8191 bytes.
                                 tv2Write16KCalls 1.3.6.1.4.1.789.1.3.2.2.6.2.6 counter32 read-only
The number of NFS Version 2 write calls received by the server since last boot with request sizes between 8K-16383 bytes.
                                 tv2Write32KCalls 1.3.6.1.4.1.789.1.3.2.2.6.2.7 counter32 read-only
The number of NFS Version 2 write calls received by the server since last boot with request sizes between 16K-32767 bytes.
                                 tv2Write64KCalls 1.3.6.1.4.1.789.1.3.2.2.6.2.8 counter32 read-only
The number of NFS Version 2 write calls received by the server since last boot with request sizes between 32K-65535 bytes.
                                 tv2Write128KCalls 1.3.6.1.4.1.789.1.3.2.2.6.2.9 counter32 read-only
The number of NFS Version 2 write calls received by the server since last boot with request sizes between 64K-131071 bytes.
                             tv3ReadStats 1.3.6.1.4.1.789.1.3.2.2.6.3
                                 tv3Read512Calls 1.3.6.1.4.1.789.1.3.2.2.6.3.1 counter32 read-only
The number of NFS Version 3 read calls received by the server since last boot with request sizes between 0-511 bytes.
                                 tv3Read1KCalls 1.3.6.1.4.1.789.1.3.2.2.6.3.2 counter32 read-only
The number of NFS Version 3 read calls received by the server since last boot with request sizes between 512-1023 bytes.
                                 tv3Read2KCalls 1.3.6.1.4.1.789.1.3.2.2.6.3.3 counter32 read-only
The number of NFS Version 3 read calls received by the server since last boot with request sizes between 1K-2047 bytes.
                                 tv3Read4KCalls 1.3.6.1.4.1.789.1.3.2.2.6.3.4 counter32 read-only
The number of NFS Version 3 read calls received by the server since last boot with request sizes between 2K-4095 bytes.
                                 tv3Read8KCalls 1.3.6.1.4.1.789.1.3.2.2.6.3.5 counter32 read-only
The number of NFS Version 3 read calls received by the server since last boot with request sizes between 4K-8191 bytes.
                                 tv3Read16KCalls 1.3.6.1.4.1.789.1.3.2.2.6.3.6 counter32 read-only
The number of NFS Version 3 read calls received by the server since last boot with request sizes between 8K-16383 bytes.
                                 tv3Read32KCalls 1.3.6.1.4.1.789.1.3.2.2.6.3.7 counter32 read-only
The number of NFS Version 3 read calls received by the server since last boot with request sizes between 16K-32767 bytes.
                                 tv3Read64KCalls 1.3.6.1.4.1.789.1.3.2.2.6.3.8 counter32 read-only
The number of NFS Version 3 read calls received by the server since last boot with request sizes between 32K-65535 bytes.
                                 tv3Read128KCalls 1.3.6.1.4.1.789.1.3.2.2.6.3.9 counter32 read-only
The number of NFS Version 3 read calls received by the server since last boot with request sizes between 64K-131071 bytes.
                             tv3WriteStats 1.3.6.1.4.1.789.1.3.2.2.6.4
                                 tv3Write512Calls 1.3.6.1.4.1.789.1.3.2.2.6.4.1 counter32 read-only
The number of NFS Version 3 write calls received by the server since last boot with request sizes between 0-511 bytes.
                                 tv3Write1KCalls 1.3.6.1.4.1.789.1.3.2.2.6.4.2 counter32 read-only
The number of NFS Version 3 write calls received by the server since last boot with request sizes between 512-1023 bytes.
                                 tv3Write2KCalls 1.3.6.1.4.1.789.1.3.2.2.6.4.3 counter32 read-only
The number of NFS Version 3 write calls received by the server since last boot with request sizes between 1K-2047 bytes.
                                 tv3Write4KCalls 1.3.6.1.4.1.789.1.3.2.2.6.4.4 counter32 read-only
The number of NFS Version 3 write calls received by the server since last boot with request sizes between 2K-4095 bytes.
                                 tv3Write8KCalls 1.3.6.1.4.1.789.1.3.2.2.6.4.5 counter32 read-only
The number of NFS Version 3 write calls received by the server since last boot with request sizes between 4K-8191 bytes.
                                 tv3Write16KCalls 1.3.6.1.4.1.789.1.3.2.2.6.4.6 counter32 read-only
The number of NFS Version 3 write calls received by the server since last boot with request sizes between 8K-16383 bytes.
                                 tv3Write32KCalls 1.3.6.1.4.1.789.1.3.2.2.6.4.7 counter32 read-only
The number of NFS Version 3 write calls received by the server since last boot with request sizes between 16K-32767 bytes.
                                 tv3Write64KCalls 1.3.6.1.4.1.789.1.3.2.2.6.4.8 counter32 read-only
The number of NFS Version 3 write calls received by the server since last boot with request sizes between 32K-65535 bytes.
                                 tv3Write128KCalls 1.3.6.1.4.1.789.1.3.2.2.6.4.9 counter32 read-only
The number of NFS Version 3 write calls received by the server since last boot with request sizes between 64K-131071 bytes.
                 nfsOptions 1.3.6.1.4.1.789.1.3.3
                     nfsIsLicensed 1.3.6.1.4.1.789.1.3.3.1 integer read-only
Whether the nfs protocol is licensed on the filer. Enumeration: 'true': 2, 'false': 1.
             quota 1.3.6.1.4.1.789.1.4
                 quotaState 1.3.6.1.4.1.789.1.4.1 integer read-only
Indicates whether the root volume's quotas are ON, OFF or initializing. This object is deprecated - use qvStateTable.qvStateStat instead. Enumeration: 'quotaStateOff': 1, 'quotaStateOn': 2, 'quotaStateInit': 3.
                 quotaInitPercent 1.3.6.1.4.1.789.1.4.2 integer32 read-only
Indicates percentage of root volume quota computation done while quotas are in initializing state. This object is deprecated - use qvStateTable.qvInitPercent instead.
                 qrTable 1.3.6.1.4.1.789.1.4.3 no-access
Provide a report of the current file and space consumption for each user or group with a quota in /etc/quotas. All quotas are displayed regardless of volume, and no volume information is given. This table is deprecated - use qrVTable instead.
                     qrEntry 1.3.6.1.4.1.789.1.4.3.1 no-access
Provide a report of the current file and space consumption for a referenced entry with a quota in the file /etc/quotas. All quotas are displayed regardless of volume, and no volume information is given. This object is deprecated - use qrVEntry instead.
                         qrIndex 1.3.6.1.4.1.789.1.4.3.1.1 integer32 read-only
A number that identifies this entry in the file /etc/quotas.
                         qrType 1.3.6.1.4.1.789.1.4.3.1.2 integer read-only
Identifies the kind of quota for this qrEntry. Enumeration: 'qrTypeUser': 1, 'qrTypeUnknown': 4, 'qrTypeGroup': 2, 'qrTypeTree': 3.
                         qrId 1.3.6.1.4.1.789.1.4.3.1.3 integer32 read-only
The UID (user's numerical ID) or the GID (numerical ID of the group that a user belongs to), as applicable, associated with this qrEntry.
                         qrKBytesUsed 1.3.6.1.4.1.789.1.4.3.1.4 integer32 read-only
The current number of KBytes used for this qrEntry.
                         qrKBytesLimit 1.3.6.1.4.1.789.1.4.3.1.5 integer32 read-only
The limit of KBytes that can be used for this qrEntry.
                         qrFilesUsed 1.3.6.1.4.1.789.1.4.3.1.6 integer32 read-only
The current number of files used for this qrEntry.
                         qrFileLimit 1.3.6.1.4.1.789.1.4.3.1.7 integer32 read-only
The limit of files that can be used for this qrEntry.
                         qrPathName 1.3.6.1.4.1.789.1.4.3.1.8 displaystring read-only
A textual string that contains the path corresponding to this qrEntry.
                 qvStateTable 1.3.6.1.4.1.789.1.4.4 no-access
Provide a report of the current quota state of each volume in the system.
                     qvStateEntry 1.3.6.1.4.1.789.1.4.4.1 no-access
Provide a report of the current quota state of each volume in the system.
                         qvStateVolume 1.3.6.1.4.1.789.1.4.4.1.1 integer32 read-only
A number that identifies this volume. The mapping of this number to actual volumes may change if volumes are added or deleted. Use qvStateName to unambiguously identify a volume. The mapping established by this object is the same as the mapping of qrVVolume (below) to actual volumes. For instance, if a qvStateVolume value of '5' represents the volume 'vol2', a value of '5' in qrVVolume also represents the volume 'vol2'.
                         qvStateName 1.3.6.1.4.1.789.1.4.4.1.2 displaystring read-only
Indicates the name of this volume.
                         qvStateStat 1.3.6.1.4.1.789.1.4.4.1.3 integer read-only
Indicates whether quotas are ON, OFF or initializing. Enumeration: 'quotaStateOff': 1, 'quotaStateOn': 2, 'quotaStateInit': 3.
                         qvStateInitPercent 1.3.6.1.4.1.789.1.4.4.1.4 integer32 read-only
Indicates percentage of quota computation done while quotas are in initializing state.
                 qrVTable 1.3.6.1.4.1.789.1.4.5 no-access
Provide a report of the current file and space consumption for each user or group with a quota in /etc/quotas.
                     qrVEntry 1.3.6.1.4.1.789.1.4.5.1 no-access
Provide a report of the current file and space consumption for a referenced entry with a quota in the file /etc/quotas. Indices select the volume of the quota and the quota entry itself.
                         qrVIndex 1.3.6.1.4.1.789.1.4.5.1.1 integer32 read-only
A number that identifies this entry in the file /etc/quotas in the given volume.
                         qrVType 1.3.6.1.4.1.789.1.4.5.1.2 integer read-only
Identifies the kind of quota for this qrVEntry. Enumeration: 'qrVTypeTree': 3, 'qrVTypeGroup': 2, 'qrVTypeUser': 1, 'qrVTypeUnknown': 6, 'qrVTypeGroupDefault': 5, 'qrVTypeUserDefault': 4.
                         qrVId 1.3.6.1.4.1.789.1.4.5.1.3 integer32 read-only
The UID (user's numerical ID) or the GID (numerical ID of the group that a user belongs to), as applicable, associated with this qrVEntry. Check the qrVIdType field to see if this field is valid.
                         qrVKBytesUsed 1.3.6.1.4.1.789.1.4.5.1.4 integer32 read-only
The current number of KBytes used for this qrVEntry.
                         qrVKBytesLimit 1.3.6.1.4.1.789.1.4.5.1.5 integer32 read-only
The limit of KBytes that can be used for this qrVEntry.
                         qrVFilesUsed 1.3.6.1.4.1.789.1.4.5.1.6 integer32 read-only
The current number of files used for this qrVEntry.
                         qrVFileLimit 1.3.6.1.4.1.789.1.4.5.1.7 integer32 read-only
The limit of files that can be used for this qrVEntry.
                         qrVPathName 1.3.6.1.4.1.789.1.4.5.1.8 displaystring read-only
A textual string that contains the path corresponding to this qrVEntry.
                         qrVVolume 1.3.6.1.4.1.789.1.4.5.1.9 integer32 read-only
A number that identifies the volume for which this quota is in effect on. The volume that this value represents can be determined by checking the value of qvStateName (above) with qvStateVolume set to the value found here.
                         qrVTree 1.3.6.1.4.1.789.1.4.5.1.10 displaystring read-only
A string that indicates which qtree this quota belongs to.
                         qrVIdType 1.3.6.1.4.1.789.1.4.5.1.11 integer read-only
A value that indicates which ID field is valid. Enumeration: 'qrVSidValid': 2, 'qrVIdValid': 1.
                         qrVSid 1.3.6.1.4.1.789.1.4.5.1.12 displaystring read-only
The one or more IDs associated with this qrVEntry. If the qrVentry is associated with a Windows ID, the text form of the Windows ID (the SID) is here. If the qrVEntry is associated with more than one id, this contains a blank separated list of those IDs. Check the qrVIdType field to see if this field is valid.
                         qrVKBytesThreshold 1.3.6.1.4.1.789.1.4.5.1.13 integer32 read-only
A number of KBytes that when used by this entry produces a warning message.
                         qrVKBytesLimitSoft 1.3.6.1.4.1.789.1.4.5.1.14 integer32 read-only
The limit of KBytes that can be used for this qrVEntry before a warning message and SNMP trap is produced.
                         qrVFileLimitSoft 1.3.6.1.4.1.789.1.4.5.1.15 integer32 read-only
The limit of files that can be used for this qrVEntry before a warning message and SNMP trap is produced.
                 qrV2Table 1.3.6.1.4.1.789.1.4.6 no-access
Provide a report of the current file and space consumption for each user or group with a quota in /etc/quotas.
                     qrV2Entry 1.3.6.1.4.1.789.1.4.6.1 no-access
Provide a report of the current file and space consumption for a referenced entry with a quota in the file /etc/quotas. Indices select the volume of the quota and the quota entry itself.
                         qrV2Index 1.3.6.1.4.1.789.1.4.6.1.1 integer32 read-only
A number that identifies this entry in the file /etc/quotas in the given volume.
                         qrV2Type 1.3.6.1.4.1.789.1.4.6.1.2 integer read-only
Identifies the kind of quota for this qrV2Entry. Enumeration: 'qrV2TypeUnknown': 6, 'qrV2TypeGroupDefault': 5, 'qrV2TypeUserDefault': 4, 'qrV2TypeUser': 1, 'qrV2TypeTree': 3, 'qrV2TypeGroup': 2.
                         qrV2Id 1.3.6.1.4.1.789.1.4.6.1.3 integer32 read-only
The UID (user's numerical ID) or the GID (numerical ID of the group that a user belongs to), as applicable, associated with this qrV2Entry. Check the qrV2IdType field to see if this field is valid.
                         qrV2HighKBytesUsed 1.3.6.1.4.1.789.1.4.6.1.4 integer32 read-only
The current number of KBytes used for this qrV2Entry. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                         qrV2LowKBytesUsed 1.3.6.1.4.1.789.1.4.6.1.5 integer32 read-only
The current number of KBytes used for this qrV2Entry. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                         qrV2QuotaUnlimited 1.3.6.1.4.1.789.1.4.6.1.6 integer read-only
This flag designates whether or not the size based quota limit for this qrV2Entry is unlimited. If false(1) then qrV2*KBytesLimit OID's are valid, if true(0) then qrV2*KBytesLimit OID's are unused and will return 0. Enumeration: 'true': 2, 'false': 1.
                         qrV2HighKBytesLimit 1.3.6.1.4.1.789.1.4.6.1.7 integer32 read-only
The limit of KBytes that can be used for this qrV2Entry. This object returns the most significant 32 bits of the 64 bit unsigned integer. This will return 0 if qrV2QuotaUnlimited is true.
                         qrV2LowKBytesLimit 1.3.6.1.4.1.789.1.4.6.1.8 integer32 read-only
The limit of KBytes that can be used for this qrV2Entry. This object returns the least significant 32 bits of the 64 bit unsigned integer. This will return 0 if qrV2QuotaUnlimited is true.
                         qrV2FilesUsed 1.3.6.1.4.1.789.1.4.6.1.9 integer32 read-only
The current number of files used for this qrV2Entry.
                         qrV2FileQuotaUnlimited 1.3.6.1.4.1.789.1.4.6.1.10 integer read-only
This flag designates whether or not the file based quota limit for this qrV2Entry is unlimited. If false(1) then qrV2FileLimit is valid, if true(0) qrV2FileLimit will return 0. Enumeration: 'true': 2, 'false': 1.
                         qrV2FileLimit 1.3.6.1.4.1.789.1.4.6.1.11 integer32 read-only
The limit of files that can be used for this qrV2Entry.
                         qrV2PathName 1.3.6.1.4.1.789.1.4.6.1.12 displaystring read-only
A textual string that contains the path corresponding to this qrV2Entry.
                         qrV2Volume 1.3.6.1.4.1.789.1.4.6.1.13 integer32 read-only
A number that identifies the volume for which this quota is in effect on. The volume that this value represents can be determined by checking the value of qvStateName (above) with qvStateVolume set to the value found here.
                         qrV2Tree 1.3.6.1.4.1.789.1.4.6.1.14 displaystring read-only
A string that indicates which qtree this quota belongs to.
                         qrV2IdType 1.3.6.1.4.1.789.1.4.6.1.15 integer read-only
A value that indicates which ID field is valid. Enumeration: 'qrV2SidValid': 2, 'qrV2IdValid': 1.
                         qrV2Sid 1.3.6.1.4.1.789.1.4.6.1.16 displaystring read-only
The one or more IDs associated with this qrV2Entry. If the qrV2entry is associated with a Windows ID, the text form of the Windows ID (the SID) is here. If the qrV2Entry is associated with more than one id, this contains a blank separated list of those IDs. Check the qrV2IdType field to see if this field is valid.
                         qrV2ThresholdUnlimited 1.3.6.1.4.1.789.1.4.6.1.17 integer read-only
This flag designates whether or not the size based threshold limit for this qrV2Entry is unlimited. If false(1) then qrV2*KBytesThreshold OID's are valid, if true(0) then qrV2*KBytesThreshold OID's are unused and will return 0. Enumeration: 'true': 2, 'false': 1.
                         qrV2HighKBytesThreshold 1.3.6.1.4.1.789.1.4.6.1.18 integer32 read-only
A number of KBytes that when used by this entry produces a warning message. This object returns the most significant 32 bits of the 64 bit unsigned integer. This will return 0 if qrV2ThresholdUnlimited is true.
                         qrV2LowKBytesThreshold 1.3.6.1.4.1.789.1.4.6.1.19 integer32 read-only
A number of KBytes that when used by this entry produces a warning message. This object returns the least significant 32 bits of the 64 bit unsigned integer. This will return 0 if qrV2ThresholdUnlimited is true.
                         qrV2SoftQuotaUnlimited 1.3.6.1.4.1.789.1.4.6.1.20 integer read-only
This flag designates whether or not the size based soft quota limit for this qrV2Entry is unlimited. If false(1) then qrV2*KBytesSoftLimit OID's are valid, if true(0) the qrV2*KBytesSoftLimit OID's are unused and will return 0. Enumeration: 'true': 2, 'false': 1.
                         qrV2HighKBytesSoftLimit 1.3.6.1.4.1.789.1.4.6.1.21 integer32 read-only
The limit of KBytes that can be used for this qrV2Entry before a warning message and SNMP trap is produced. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                         qrV2LowKBytesSoftLimit 1.3.6.1.4.1.789.1.4.6.1.22 integer32 read-only
The limit of KBytes that can be used for this qrV2Entry before a warning message and SNMP trap is produced. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                         qrV2SoftFileQuotaUnlimited 1.3.6.1.4.1.789.1.4.6.1.23 integer read-only
This flag designates whether or not the file based soft quota limit for this qrV2Entry is unlimited. If false(1) then qrV2SoftFileLimit is valid, if true(0) qrV2SoftFileLimit is unused and will return 0. Enumeration: 'true': 2, 'false': 1.
                         qrV2SoftFileLimit 1.3.6.1.4.1.789.1.4.6.1.24 integer32 read-only
The limit of files that can be used for this qrV2Entry before a warning message and SNMP trap is produced. This will return 0 if qrV2SoftFileQuotaUnlimited is true.
                         qrV264KBytesUsed 1.3.6.1.4.1.789.1.4.6.1.25 counter64 read-only
The current number of KBytes used for this qrV2Entry. This object returns all of the 64 bit unsigned integer.
                         qrV264KBytesLimit 1.3.6.1.4.1.789.1.4.6.1.26 counter64 read-only
The limit of KBytes that can be used for this qrV2Entry. This object returns all of the 64 bit unsigned integer. This will return 0 if qrV2QuotaUnlimited is true.
                         qrV264KBytesThreshold 1.3.6.1.4.1.789.1.4.6.1.27 counter64 read-only
A number of KBytes that when used by this entry produces a warning message. This object returns the all of the 64 bit unsigned integer. This will return 0 if qrV2ThresholdUnlimited is true.
                         qrV264KBytesSoftLimit 1.3.6.1.4.1.789.1.4.6.1.28 counter64 read-only
The limit of KBytes that can be used for this qrV2Entry before a warning message and SNMP trap is produced. This object returns all of the 64 bit unsigned integer.
             filesys 1.3.6.1.4.1.789.1.5
                 filesysMaxfilesAvail 1.3.6.1.4.1.789.1.5.1 integer32 read-only
The count of the maximum number of files allowable on the root volume. This object is deprecated - use dfEntry.dfMaxFilesAvail instead.
                 filesysMaxfilesUsed 1.3.6.1.4.1.789.1.5.2 integer32 read-only
The count of the number of files currently in use on the root volume. This object is deprecated - use dfEntry.dfMaxFilesUsed instead.
                 filesysMaxfilesPossible 1.3.6.1.4.1.789.1.5.3 integer32 read-only
The largest value to which the filesysMaxfilesAvail parameter above can be increased by reconfiguration on the root volume. This object is deprecated - use dfEntry.dfMaxFilesPossible.
                 dfTable 1.3.6.1.4.1.789.1.5.4 no-access
Provide a report of the available disk space on the file systems. The tables shows the available disk space for volumes as well as aggregates.
                     dfEntry 1.3.6.1.4.1.789.1.5.4.1 no-access
Provide a report of the available disk space on the referenced file system.
                         dfIndex 1.3.6.1.4.1.789.1.5.4.1.1 integer32 read-only
A number that identifies this entry for the referenced file system.
                         dfFileSys 1.3.6.1.4.1.789.1.5.4.1.2 displaystring read-only
The name for the referenced file system.
                         dfKBytesTotal 1.3.6.1.4.1.789.1.5.4.1.3 integer32 read-only
The total capacity in KBytes for the referenced file system.
                         dfKBytesUsed 1.3.6.1.4.1.789.1.5.4.1.4 integer32 read-only
The total disk space in KBytes that is in use on the referenced file system.
                         dfKBytesAvail 1.3.6.1.4.1.789.1.5.4.1.5 integer32 read-only
The total disk space in KBytes that is free for use on the referenced file system.
                         dfPerCentKBytesCapacity 1.3.6.1.4.1.789.1.5.4.1.6 integer32 read-only
The percentage of disk space currently in use on the referenced file system.
                         dfInodesUsed 1.3.6.1.4.1.789.1.5.4.1.7 integer32 read-only
The total number of inodes in use on the referenced file system.
                         dfInodesFree 1.3.6.1.4.1.789.1.5.4.1.8 integer32 read-only
The total number of inodes that are available for use on the referenced file system.
                         dfPerCentInodeCapacity 1.3.6.1.4.1.789.1.5.4.1.9 integer32 read-only
The percentage of disk space currently in use based on inode counts, on the referenced file system.
                         dfMountedOn 1.3.6.1.4.1.789.1.5.4.1.10 displaystring read-only
The name of the file on which this file system is mounted.
                         dfMaxFilesAvail 1.3.6.1.4.1.789.1.5.4.1.11 integer32 read-only
The count of the maximum number of files allowable on the referenced file system.
                         dfMaxFilesUsed 1.3.6.1.4.1.789.1.5.4.1.12 integer32 read-only
The count of the number of files currently in use on the referenced file system.
                         dfMaxFilesPossible 1.3.6.1.4.1.789.1.5.4.1.13 integer32 read-only
The largest value to which the filesysMaxfilesAvail parameter above can be increased by reconfiguration on the referenced file system.
                         dfHighTotalKBytes 1.3.6.1.4.1.789.1.5.4.1.14 integer32 read-only
The total capacity in KBytes for the referenced file system. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                         dfLowTotalKBytes 1.3.6.1.4.1.789.1.5.4.1.15 integer32 read-only
The total capacity in KBytes for the referenced file system. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                         dfHighUsedKBytes 1.3.6.1.4.1.789.1.5.4.1.16 integer32 read-only
The total disk space in KBytes that is in use on the referenced file system. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                         dfLowUsedKBytes 1.3.6.1.4.1.789.1.5.4.1.17 integer32 read-only
The total disk space in KBytes that is in use on the referenced file system. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                         dfHighAvailKBytes 1.3.6.1.4.1.789.1.5.4.1.18 integer32 read-only
The total disk space in KBytes that is free for use on the referenced file system. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                         dfLowAvailKBytes 1.3.6.1.4.1.789.1.5.4.1.19 integer32 read-only
The total disk space in KBytes that is free for use on the referenced file system. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                         dfStatus 1.3.6.1.4.1.789.1.5.4.1.20 integer read-only
The status of the file system. Enumeration: 'replayed': 10, 'creating': 5, 'frozen': 3, 'mounting': 6, 'replaying': 9, 'unmounting': 7, 'destroying': 4, 'nofsinfo': 8, 'unmounted': 1, 'mounted': 2.
                         dfMirrorStatus 1.3.6.1.4.1.789.1.5.4.1.21 integer read-only
Overall mirror status of the file system. Enumeration: 'uninitialized': 2, 'cpcheckwait': 4, 'failed': 9, 'normal': 6, 'invalid': 1, 'needcpcheck': 3, 'unmirrored': 5, 'resyncing': 8, 'degraded': 7, 'limbo': 10.
                         dfPlexCount 1.3.6.1.4.1.789.1.5.4.1.22 integer32 read-only
Number of plexes in this file system.
                         dfType 1.3.6.1.4.1.789.1.5.4.1.23 integer read-only
Indicates the type of container. Enumeration: 'traditionalVolume': 1, 'flexibleVolume': 2, 'aggregate': 3.
                         dfHighSisSharedKBytes 1.3.6.1.4.1.789.1.5.4.1.24 integer32 read-only
The total amount of data in KBytes that is shared by more that one instance on the referenced file system. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                         dfLowSisSharedKBytes 1.3.6.1.4.1.789.1.5.4.1.25 integer32 read-only
The total amount of data in KBytes that is shared by more that one instance on the referenced file system. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                         dfHighSisSavedKBytes 1.3.6.1.4.1.789.1.5.4.1.26 integer32 read-only
The total disk space in KBytes that is saved by storing only one copy of the duplicated blocks on the referenced file system. The object returns the most significant 32 bits of the 64 bit unsigned integer.
                         dfLowSisSavedKBytes 1.3.6.1.4.1.789.1.5.4.1.27 integer32 read-only
The total disk space in KBytes that is saved by storing only one copy of the duplicated blocks on the referenced file system. The object returns the least significant 32 bits of the 64 bit unsigned integer.
                         dfPerCentSaved 1.3.6.1.4.1.789.1.5.4.1.28 integer32 read-only
The percentage of disk space saved by eliminating the duplicated blocks on the referenced file system.
                         df64TotalKBytes 1.3.6.1.4.1.789.1.5.4.1.29 counter64 read-only
The total capacity in KBytes for the referenced file system. This object returns all of the 64 bit unsigned integer.
                         df64UsedKBytes 1.3.6.1.4.1.789.1.5.4.1.30 counter64 read-only
The total disk space in KBytes that is in use on the referenced file system. This object returns all of the 64 bit unsigned integer.
                         df64AvailKBytes 1.3.6.1.4.1.789.1.5.4.1.31 counter64 read-only
The total disk space in KBytes that is free for use on the referenced file system. This object returns all of the 64 bit unsigned integer.
                         df64SisSharedKBytes 1.3.6.1.4.1.789.1.5.4.1.32 counter64 read-only
The total amount of data in KBytes that is shared by more that one instance on the referenced file system. This object returns all of the 64 bit unsigned integer.
                         df64SisSavedKBytes 1.3.6.1.4.1.789.1.5.4.1.33 counter64 read-only
The total disk space in KBytes that is saved by storing only one copy of the duplicated blocks on the referenced file system. The object returns all of the 64 bit unsigned integer.
                 snapshot 1.3.6.1.4.1.789.1.5.5
                     slTable 1.3.6.1.4.1.789.1.5.5.1 no-access
Provide a report of the snapshots on the root volume. This table is deprecated - use slVTable instead.
                         slEntry 1.3.6.1.4.1.789.1.5.5.1.1 no-access
Provide a report on a given snapshot on the root volume. This object is deprecated - use slVEntry instead.
                             slIndex 1.3.6.1.4.1.789.1.5.5.1.1.1 integer32 read-only
A number that identifies this entry for the referenced file system.
                             slMonth 1.3.6.1.4.1.789.1.5.5.1.1.2 integer read-only
The month in which the snapshot was created. Enumeration: 'february': 2, 'october': 10, 'march': 3, 'august': 8, 'september': 9, 'may': 5, 'january': 1, 'june': 6, 'april': 4, 'december': 12, 'july': 7, 'november': 11.
                             slDay 1.3.6.1.4.1.789.1.5.5.1.1.3 integer32 read-only
The day on which the snapshot was created.
                             slHour 1.3.6.1.4.1.789.1.5.5.1.1.4 integer32 read-only
The hour in which the snapshot was created.
                             slMinutes 1.3.6.1.4.1.789.1.5.5.1.1.5 integer32 read-only
The minute in which the snapshot was created.
                             slName 1.3.6.1.4.1.789.1.5.5.1.1.6 displaystring read-only
The name of the referenced snapshot.
                     slVTable 1.3.6.1.4.1.789.1.5.5.2 no-access
Provide a report of the snapshots on the file systems.
                         slVEntry 1.3.6.1.4.1.789.1.5.5.2.1 no-access
Provide a report on a given snapshot on the file system. Indices select the volume of the snapshot and the snapshot entry itself.
                             slVIndex 1.3.6.1.4.1.789.1.5.5.2.1.1 integer32 read-only
A number that identifies this entry for the referenced file system.
                             slVMonth 1.3.6.1.4.1.789.1.5.5.2.1.2 integer read-only
The month in which the snapshot was created. Enumeration: 'february': 2, 'october': 10, 'march': 3, 'august': 8, 'september': 9, 'may': 5, 'january': 1, 'june': 6, 'april': 4, 'december': 12, 'july': 7, 'november': 11.
                             slVDay 1.3.6.1.4.1.789.1.5.5.2.1.3 integer32 read-only
The day on which the snapshot was created.
                             slVHour 1.3.6.1.4.1.789.1.5.5.2.1.4 integer32 read-only
The hour in which the snapshot was created.
                             slVMinutes 1.3.6.1.4.1.789.1.5.5.2.1.5 integer32 read-only
The minute in which the snapshot was created.
                             slVName 1.3.6.1.4.1.789.1.5.5.2.1.6 displaystring read-only
The name of the referenced snapshot.
                             slVVolume 1.3.6.1.4.1.789.1.5.5.2.1.7 integer32 read-only
A number that identifies the volume / aggregate that contains this snapshot.
                             slVNumber 1.3.6.1.4.1.789.1.5.5.2.1.8 integer32 read-only
Number of snapshots for this volume / aggregate.
                             slVVolumeName 1.3.6.1.4.1.789.1.5.5.2.1.9 displaystring read-only
The name of the volume / aggregate. This does not have a /vol/ prefix.
                             slVType 1.3.6.1.4.1.789.1.5.5.2.1.10 integer read-only
Indicates the type of container for this snapshot. Enumeration: 'traditionalVolume': 1, 'flexibleVolume': 2, 'aggregate': 3.
                     slQTable 1.3.6.1.4.1.789.1.5.5.3 no-access
Provide a report of the snapshots and their contents on the file systems.
                         slQEntry 1.3.6.1.4.1.789.1.5.5.3.1 no-access
Provide a report on a given snapshot for a given qtree on the file system. Indices select the volume and qtree of the snapshot and the snapshot entry itself.
                             slQIndex 1.3.6.1.4.1.789.1.5.5.3.1.1 integer32 read-only
A number that identifies this entry for the referenced file system.
                             slQVolume 1.3.6.1.4.1.789.1.5.5.3.1.2 integer32 read-only
A number that identifies the volume that contains this snapshot.
                             slQQtree 1.3.6.1.4.1.789.1.5.5.3.1.3 integer32 read-only
A number that identifies the qtree that contains this snapshot.
                             slQSnapshotName 1.3.6.1.4.1.789.1.5.5.3.1.4 displaystring read-only
The name of the referenced snapshot.
                             slQSnapshotTime 1.3.6.1.4.1.789.1.5.5.3.1.5 integer32 read-only
Time of the snapshot on the system. The time in seconds since January 1, 1970.
                             slQQtreeName 1.3.6.1.4.1.789.1.5.5.3.1.6 displaystring read-only
A string that indicates which qtree is in this snapshot
                             slQQtreeContent 1.3.6.1.4.1.789.1.5.5.3.1.7 integer read-only
The content of the qtree tree Enumeration: 'transitioning': 2, 'replica': 1, 'original': 3.
                             slQSource 1.3.6.1.4.1.789.1.5.5.3.1.8 octet string read-only
The source of this qtree for a replicated qtree. '-' for a original qtree.
                             slQSourceTime 1.3.6.1.4.1.789.1.5.5.3.1.9 integer32 read-only
Time of the source snapshot for a replicated qtree. Time of the current snapshot for an original qtree. The time in seconds since January 1, 1970. 0 if the qtree is in a transitioning stage
                             slQVolumeName 1.3.6.1.4.1.789.1.5.5.3.1.10 displaystring read-only
The name of the volume. This does not have a /vol/ prefix.
                 dfNumber 1.3.6.1.4.1.789.1.5.6 integer32 read-only
Number of entries in the dfTable table.
                 fsStatus 1.3.6.1.4.1.789.1.5.7
                     fsOverallStatus 1.3.6.1.4.1.789.1.5.7.1 integer read-only
An indication of overall file system health. 'ok' indicates that all file systems have adequate space. 'nearlyFull' means that one or more is nearly full (more than 95% full). 'full' means that one or more are more than 98% full. Enumeration: 'nearlyFull': 2, 'full': 3, 'ok': 1.
                     fsStatusMessage 1.3.6.1.4.1.789.1.5.7.2 displaystring read-only
A string indicating any file systems which are full or nearly full.
                     fsMaxUsedBytesPerCent 1.3.6.1.4.1.789.1.5.7.3 integer32 read-only
The percentage of space currently in use by the file system which is most full.
                     fsMaxUsedInodesPerCent 1.3.6.1.4.1.789.1.5.7.4 integer32 read-only
The percentage of inodes currently in use by the file system which is most full.
                     fsMaxUsedReservedPerCent 1.3.6.1.4.1.789.1.5.7.5 integer32 read-only
The percentage of reserved space currently in use by the file system which is most full.
                 volTable 1.3.6.1.4.1.789.1.5.8 no-access
List the volumes defined on the system, including offline volumes.
                     volEntry 1.3.6.1.4.1.789.1.5.8.1 no-access
Provide details about a particular volume.
                         volIndex 1.3.6.1.4.1.789.1.5.8.1.1 integer32 read-only
A number that identifies this volume. The volIndex is not related to any other table defined in this MIB, and may change as volumes are created and destroyed.
                         volName 1.3.6.1.4.1.789.1.5.8.1.2 displaystring read-only
Name of the volume. This includes no /vol/ prefix.
                         volFSID 1.3.6.1.4.1.789.1.5.8.1.3 displaystring read-only
Unique identifier for this volume.
                         volOwningHost 1.3.6.1.4.1.789.1.5.8.1.4 integer read-only
Indication of which host owns this volume. Enumeration: 'partner': 2, 'local': 1.
                         volState 1.3.6.1.4.1.789.1.5.8.1.5 displaystring read-only
State of the volume, such as 'online' or 'offline'.
                         volStatus 1.3.6.1.4.1.789.1.5.8.1.6 displaystring read-only
Status of the volume, such as 'normal' or 'reconstructing'. May include several values separated by comma and space.
                         volOptions 1.3.6.1.4.1.789.1.5.8.1.7 displaystring read-only
Options associated with the volume, such as 'root' and 'nosnapdir=off'. May include several values separated by comma.
                         volUUID 1.3.6.1.4.1.789.1.5.8.1.8 displaystring read-only
A unique id associated with the volume.
                         volAggrName 1.3.6.1.4.1.789.1.5.8.1.9 displaystring read-only
Name of the aggregate this flexible volume is a part of.
                         volType 1.3.6.1.4.1.789.1.5.8.1.10 integer read-only
Type of this volume, older volumes are traditional while newer volumes contained in aggregates are flexible. Enumeration: 'traditional': 1, 'flexible': 2.
                         volClone 1.3.6.1.4.1.789.1.5.8.1.11 integer read-only
True indicates flexible volume is a clone. Enumeration: 'true': 2, 'false': 1.
                         volCloneOf 1.3.6.1.4.1.789.1.5.8.1.12 displaystring read-only
Name of flexible volume this flexible volume is a clone of.
                         volCloneSnap 1.3.6.1.4.1.789.1.5.8.1.13 displaystring read-only
Name of original cloned snapshot.
                 volNumber 1.3.6.1.4.1.789.1.5.9 integer32 read-only
Number of volumes in the volTable.
                 qtreeTable 1.3.6.1.4.1.789.1.5.10 no-access
Provide a list of the qtrees on the system.
                       qtreeEntry 1.3.6.1.4.1.789.1.5.10.1 no-access
Provide details about a particular qtree.
                           qtreeIndex 1.3.6.1.4.1.789.1.5.10.1.1 integer32 read-only
Index into the qtree table.
                           qtreeVolume 1.3.6.1.4.1.789.1.5.10.1.2 integer32 read-only
A number that identifies the volume that contains this qtree.
                           qtreeVolumeName 1.3.6.1.4.1.789.1.5.10.1.3 displaystring read-only
The name of the volume that contains this qtree. This includes no /vol/prefix.
                           qtreeId 1.3.6.1.4.1.789.1.5.10.1.4 integer32 read-only
The Id number of the qtree.
                           qtreeName 1.3.6.1.4.1.789.1.5.10.1.5 displaystring read-only
The name of the qtree.
                           qtreeStyle 1.3.6.1.4.1.789.1.5.10.1.6 integer read-only
The security style of the qtree. Enumeration: 'mixed': 3, 'unix': 1, 'ntfs': 2.
                           qtreeStatus 1.3.6.1.4.1.789.1.5.10.1.7 integer read-only
The status of the qtree. Enumeration: 'snapvaulted': 3, 'snapmirrored': 2, 'normal': 1.
                           qtreeOplock 1.3.6.1.4.1.789.1.5.10.1.8 integer read-only
An indication of whether the oplocks is enabled or not for this qtree. Enumeration: 'disabled': 2, 'enabled': 1.
                 aggrTable 1.3.6.1.4.1.789.1.5.11 no-access
List the aggregates defined on the system, including offline aggregates.
                       aggrEntry 1.3.6.1.4.1.789.1.5.11.1 no-access
Provide details about a particular aggregate.
                           aggrIndex 1.3.6.1.4.1.789.1.5.11.1.1 integer32 read-only
A number that identifies this aggregate. The aggrIndex is not related to any other table defined in this MIB, and may change as aggregates are created and destroyed.
                           aggrName 1.3.6.1.4.1.789.1.5.11.1.2 displaystring read-only
Name of the aggregate. This includes no /vol/ prefix.
                           aggrFSID 1.3.6.1.4.1.789.1.5.11.1.3 displaystring read-only
Unique identifier for this aggregate.
                           aggrOwningHost 1.3.6.1.4.1.789.1.5.11.1.4 integer read-only
Indication of which host owns this aggregate. Enumeration: 'partner': 2, 'local': 1.
                           aggrState 1.3.6.1.4.1.789.1.5.11.1.5 displaystring read-only
State of the aggregate, such as 'online' or 'offline'.
                           aggrStatus 1.3.6.1.4.1.789.1.5.11.1.6 displaystring read-only
Status of the aggregate, such as 'normal' or 'reconstructing'. May include several values separated by comma and space.
                           aggrOptions 1.3.6.1.4.1.789.1.5.11.1.7 displaystring read-only
Options associated with the aggregate.
                           aggrUUID 1.3.6.1.4.1.789.1.5.11.1.8 displaystring read-only
A unique id associated with the aggregate.
                           aggrFlexvollist 1.3.6.1.4.1.789.1.5.11.1.9 octet string read-only
List of all the flexible volumes within this aggregate.
                           aggrType 1.3.6.1.4.1.789.1.5.11.1.10 integer read-only
Type of this container, containers containing flexible volumes are aggregate. Enumeration: 'traditional': 1, 'aggregate': 2.
                           aggrRaidType 1.3.6.1.4.1.789.1.5.11.1.11 displaystring read-only
Type of raid protection of the aggregate, such as 'raid0', 'mirrored raid0', 'raid4', 'mirrored raid4', 'raid_dp', 'mirrored raid_dp'.
                 aggrNumber 1.3.6.1.4.1.789.1.5.12 integer32 read-only
Number of aggregates in the aggrTable.
             raid 1.3.6.1.4.1.789.1.6
                 raidTable 1.3.6.1.4.1.789.1.6.1 no-access
Display RAID configuration information for the root volume. This table is deprecated - use raidVTable instead.
                     raidEntry 1.3.6.1.4.1.789.1.6.1.1 no-access
Display RAID configuration information for the referenced disk drive. This only works for disks contained within the root volume, and will include spare drives. This object is deprecated - use raidVEntry instead.
                         raidIndex 1.3.6.1.4.1.789.1.6.1.1.1 integer32 read-only
A number that identifies this entry for the referenced disk drive.
                         raidDiskName 1.3.6.1.4.1.789.1.6.1.1.2 displaystring read-only
The name identifying the referenced disk drive.
                         raidStatus 1.3.6.1.4.1.789.1.6.1.1.3 integer read-only
The status of the referenced disk drive. Enumeration: 'reconstructionInProgress': 2, 'prefailed': 9, 'parityVerificationInProgress': 4, 'failed': 6, 'parityReconstructionInProgress': 3, 'scrubbingInProgress': 5, 'spare': 8, 'active': 1, 'offline': 10, 'addingSpare': 7.
                         raidDiskId 1.3.6.1.4.1.789.1.6.1.1.4 integer32 read-only
The disk identifier for the referenced disk drive.
                         raidScsiAdapter 1.3.6.1.4.1.789.1.6.1.1.5 displaystring read-only
The identifier of the SCSI adapter for the referenced disk drive.
                         raidScsiId 1.3.6.1.4.1.789.1.6.1.1.6 integer32 read-only
The identifier for the referenced disk drive on the referenced SCSI adapter.
                         raidUsedMb 1.3.6.1.4.1.789.1.6.1.1.7 integer32 read-only
The number of MBytes currently in use on the referenced disk drive.
                         raidUsedBlocks 1.3.6.1.4.1.789.1.6.1.1.8 integer32 read-only
The number of Blocks currently in use on the referenced disk drive.
                         raidTotalMb 1.3.6.1.4.1.789.1.6.1.1.9 integer32 read-only
The number of MBytes physically available on the referenced disk drive.
                         raidTotalBlocks 1.3.6.1.4.1.789.1.6.1.1.10 integer32 read-only
The number of Blocks physically available on the referenced disk drive.
                         raidCompletionPerCent 1.3.6.1.4.1.789.1.6.1.1.11 integer32 read-only
In the case when reconstruction/adding a spare, verification or scrubbing is in progress, the percent of such reconstruction, verification or scrubbing that has been completed on the referenced disk drive.
                 raidVTable 1.3.6.1.4.1.789.1.6.2 no-access
Display RAID configuration information.
                     raidVEntry 1.3.6.1.4.1.789.1.6.2.1 no-access
Display RAID configuration information for the referenced volume, raid group, and disk drive.
                         raidVIndex 1.3.6.1.4.1.789.1.6.2.1.1 integer32 read-only
A number that identifies this disk drive within the given volume and RAID group.
                         raidVDiskName 1.3.6.1.4.1.789.1.6.2.1.2 displaystring read-only
The name identifying the referenced disk drive.
                         raidVStatus 1.3.6.1.4.1.789.1.6.2.1.3 integer read-only
The status of the referenced disk drive. Enumeration: 'reconstructionInProgress': 2, 'prefailed': 9, 'parityVerificationInProgress': 4, 'failed': 6, 'parityReconstructionInProgress': 3, 'scrubbingInProgress': 5, 'active': 1, 'offline': 10.
                         raidVDiskId 1.3.6.1.4.1.789.1.6.2.1.4 integer32 read-only
The disk identifier for the referenced disk drive.
                         raidVScsiAdapter 1.3.6.1.4.1.789.1.6.2.1.5 displaystring read-only
The identifier of the SCSI adapter for the referenced disk drive.
                         raidVScsiId 1.3.6.1.4.1.789.1.6.2.1.6 integer32 read-only
The identifier for the referenced disk drive on the referenced SCSI adapter.
                         raidVUsedMb 1.3.6.1.4.1.789.1.6.2.1.7 integer32 read-only
The number of MBytes currently in use on the referenced disk drive.
                         raidVUsedBlocks 1.3.6.1.4.1.789.1.6.2.1.8 integer32 read-only
The number of Blocks currently in use on the referenced disk drive.
                         raidVTotalMb 1.3.6.1.4.1.789.1.6.2.1.9 integer32 read-only
The number of MBytes physically available on the referenced disk drive.
                         raidVTotalBlocks 1.3.6.1.4.1.789.1.6.2.1.10 integer32 read-only
The number of Blocks physically available on the referenced disk drive.
                         raidVCompletionPerCent 1.3.6.1.4.1.789.1.6.2.1.11 integer32 read-only
In the case when rapid raid recovery, disk copy, reconstruction/adding a spare, verification or scrubbing is in progress, the percent of such copy, reconstruction, verification or scrubbing that has been completed on the referenced disk drive.
                         raidVVol 1.3.6.1.4.1.789.1.6.2.1.12 integer32 read-only
A number that identifies the volume that this entry belongs to. The first volume is '1'.
                         raidVGroup 1.3.6.1.4.1.789.1.6.2.1.13 integer32 read-only
A number that identifies the RAID group within the given volume that this entry belongs to. The first RAID group is '1', and number across all plexes.
                         raidVDiskNumber 1.3.6.1.4.1.789.1.6.2.1.14 integer32 read-only
The number of disks within this RAID group.
                         raidVGroupNumber 1.3.6.1.4.1.789.1.6.2.1.15 integer32 read-only
The number of RAID groups within this volume.
                         raidVDiskPort 1.3.6.1.4.1.789.1.6.2.1.16 integer read-only
A number that indicates which port of the disk is being used by the primary path to the disk. For a dual-ported disk, values of portA and portB indicate which port is being used. If the disk only has a single port, the value is portSingle, and if the port is not active, the value is portNone. Enumeration: 'portNone': 4, 'portSingle': 3, 'portB': 2, 'portA': 1.
                         raidVSecondaryDiskName 1.3.6.1.4.1.789.1.6.2.1.17 displaystring read-only
The name identifying the secondary path to the referenced disk drive.
                         raidVSecondaryDiskPort 1.3.6.1.4.1.789.1.6.2.1.18 integer read-only
A number that indicates which port of the disk is being used by the secondary path to the disk. For a dual-ported disk, values of portA and portB indicate which port is being used. If the disk only has a single port, the value is portSingle, and if the port is not active, the value is portNone. Enumeration: 'portNone': 4, 'portSingle': 3, 'portB': 2, 'portA': 1.
                         raidVShelf 1.3.6.1.4.1.789.1.6.2.1.19 integer32 read-only
Number identifying the shelf where the disk is located.
                         raidVBay 1.3.6.1.4.1.789.1.6.2.1.20 integer32 read-only
Number identifying the disk bay within the shelf where the disk is located.
                         raidVPlex 1.3.6.1.4.1.789.1.6.2.1.21 integer32 read-only
A number that identifies the plex within the given volume that this entry belongs to. The first plex is '1'.
                         raidVPlexGroup 1.3.6.1.4.1.789.1.6.2.1.22 integer32 read-only
A number that identifies the RAID group within the given plex that this entry belongs to. The first RAID group is '1'.
                         raidVPlexNumber 1.3.6.1.4.1.789.1.6.2.1.23 integer32 read-only
The number of plexes within this volume. This number is always 1 or 2.
                         raidVPlexName 1.3.6.1.4.1.789.1.6.2.1.24 displaystring read-only
A name that identifies the plex that this entry belongs to. A plex name can be anything, but is usually a string like 'plex0' or 'plex1'.
                         raidVSectorSize 1.3.6.1.4.1.789.1.6.2.1.25 integer32 read-only
A number that specifies bytes per sector for this entry. Values are '512' or '520'.
                         raidVDiskSerialNumber 1.3.6.1.4.1.789.1.6.2.1.26 displaystring read-only
Serial number of the referenced disk drive.
                         raidVDiskVendor 1.3.6.1.4.1.789.1.6.2.1.27 displaystring read-only
The vendor of the referenced disk drive.
                         raidVDiskModel 1.3.6.1.4.1.789.1.6.2.1.28 displaystring read-only
Model string of the referenced disk drive.
                         raidVDiskFirmwareRevision 1.3.6.1.4.1.789.1.6.2.1.29 displaystring read-only
Firmware revision number of the referenced disk drive.
                         raidVDiskRPM 1.3.6.1.4.1.789.1.6.2.1.30 displaystring read-only
RPM of the referenced disk drive.
                         raidVDiskType 1.3.6.1.4.1.789.1.6.2.1.31 displaystring read-only
Interface type of the referenced disk drive. e.g SCSI, or ATA.
                         raidVDiskPool 1.3.6.1.4.1.789.1.6.2.1.32 displaystring read-only
A name that identifies the disk pool that this entry belongs to.
                         raidVDiskCopyDestDiskName 1.3.6.1.4.1.789.1.6.2.1.33 displaystring read-only
When raidVStatus value is prefailed, this string identifies the name of the disk which is the copy target of the referenced prefailed disk.
                 spareTable 1.3.6.1.4.1.789.1.6.3 no-access
Display spare disk configuration information.
                     spareEntry 1.3.6.1.4.1.789.1.6.3.1 no-access
Display configuration information for the referenced spare disk drive.
                         spareIndex 1.3.6.1.4.1.789.1.6.3.1.1 integer32 read-only
A number that identifies this entry for the referenced disk drive in the list of spare disk drives.
                         spareDiskName 1.3.6.1.4.1.789.1.6.3.1.2 displaystring read-only
The name identifying the referenced spare disk drive.
                         spareStatus 1.3.6.1.4.1.789.1.6.3.1.3 integer read-only
The status of the referenced spare disk drive. Enumeration: 'bypassed': 3, 'offline': 10, 'addingspare': 2, 'spare': 1, 'unknown': 4.
                         spareDiskId 1.3.6.1.4.1.789.1.6.3.1.4 integer32 read-only
The disk identifier for the referenced spare disk drive.
                         spareScsiAdapter 1.3.6.1.4.1.789.1.6.3.1.5 displaystring read-only
The identifier of the SCSI adapter for the referenced spare disk drive.
                         spareScsiId 1.3.6.1.4.1.789.1.6.3.1.6 integer32 read-only
The identifier for the referenced spare disk drive on the referenced SCSI adapter.
                         spareTotalMb 1.3.6.1.4.1.789.1.6.3.1.7 integer32 read-only
The number of MBytes physically available on the referenced spare disk drive.
                         spareTotalBlocks 1.3.6.1.4.1.789.1.6.3.1.8 integer32 read-only
The number of Blocks physically available on the referenced spare disk drive.
                         spareDiskPort 1.3.6.1.4.1.789.1.6.3.1.9 integer read-only
A number that indicates which port of the disk is being used by the primary path to the disk. For a dual-ported disk, values of portA and portB indicate which port is being used. If the disk only has a single port, the value is portSingle, and if the port is not active, the value is portNone. Enumeration: 'portNone': 4, 'portSingle': 3, 'portB': 2, 'portA': 1.
                         spareSecondaryDiskName 1.3.6.1.4.1.789.1.6.3.1.10 displaystring read-only
The name identifying the secondary path to the referenced disk drive.
                         spareSecondaryDiskPort 1.3.6.1.4.1.789.1.6.3.1.11 integer read-only
A number that indicates which port of the disk is being used by the secondary path to the disk. For a dual-ported disk, values of portA and portB indicate which port is being used. If the disk only has a single port, the value is portSingle, and if the port is not active, the value is portNone. Enumeration: 'portNone': 4, 'portSingle': 3, 'portB': 2, 'portA': 1.
                         spareShelf 1.3.6.1.4.1.789.1.6.3.1.12 integer32 read-only
Number identifying the shelf where the disk is located.
                         spareBay 1.3.6.1.4.1.789.1.6.3.1.13 integer32 read-only
Number identifying the disk bay within the shelf where the disk is located.
                         sparePool 1.3.6.1.4.1.789.1.6.3.1.14 displaystring read-only
A name that identifies the disk pool that this entry belongs to.
                         spareSectorSize 1.3.6.1.4.1.789.1.6.3.1.15 integer32 read-only
A number that specifies bytes per sector for this entry. Values are '512' or '520'.
                         spareDiskSerialNumber 1.3.6.1.4.1.789.1.6.3.1.16 displaystring read-only
Serial number of the referenced disk drive.
                         spareDiskVendor 1.3.6.1.4.1.789.1.6.3.1.17 displaystring read-only
The vendor of the referenced disk drive.
                         spareDiskModel 1.3.6.1.4.1.789.1.6.3.1.18 displaystring read-only
Model string of the referenced disk drive.
                         spareDiskFirmwareRevision 1.3.6.1.4.1.789.1.6.3.1.19 displaystring read-only
Firmware revision number of the referenced disk drive.
                         spareDiskRPM 1.3.6.1.4.1.789.1.6.3.1.20 displaystring read-only
RPM of the referenced disk drive.
                         spareDiskType 1.3.6.1.4.1.789.1.6.3.1.21 displaystring read-only
Interface type of the referenced disk drive. e.g SCSI, or ATA.
                 diskSummary 1.3.6.1.4.1.789.1.6.4
                     diskTotalCount 1.3.6.1.4.1.789.1.6.4.1 integer32 read-only
The total number of disks on the system.
                     diskActiveCount 1.3.6.1.4.1.789.1.6.4.2 integer32 read-only
The number of disks which are currently active, including parity disks.
                     diskReconstructingCount 1.3.6.1.4.1.789.1.6.4.3 integer32 read-only
The number of disks which are currently being reconstructed.
                     diskReconstructingParityCount 1.3.6.1.4.1.789.1.6.4.4 integer32 read-only
The number of parity disks which are currently being reconstructed.
                     diskVerifyingParityCount 1.3.6.1.4.1.789.1.6.4.5 integer32 read-only
The number of parity disks which are currently being verified.
                     diskScrubbingCount 1.3.6.1.4.1.789.1.6.4.6 integer32 read-only
The number of disks which are currently being scrubbed.
                     diskFailedCount 1.3.6.1.4.1.789.1.6.4.7 integer32 read-only
The number of disks which are currently broken.
                     diskSpareCount 1.3.6.1.4.1.789.1.6.4.8 integer32 read-only
The number of available spare disks.
                     diskAddingSpareCount 1.3.6.1.4.1.789.1.6.4.9 integer32 read-only
The number of spare disks which are currently being added into a RAID group.
                     diskFailedMessage 1.3.6.1.4.1.789.1.6.4.10 displaystring read-only
If diskFailedCount is non-zero, this is a string describing the failed disk or disks. Each failed disk is described with a sentence like Parity disk in volume vol0, RAID group 1, failed. or Disk on adapter 8a, shelf 1, bay 0, failed.
                     diskPrefailedCount 1.3.6.1.4.1.789.1.6.4.11 integer32 read-only
The number of disks which are prefailed and marked for rapid raid recovery.
                 raidVNumber 1.3.6.1.4.1.789.1.6.5 integer32 read-only
Number of entries in the raidVTable table. This is the number of volumes in the system.
                 spareNumber 1.3.6.1.4.1.789.1.6.6 integer32 read-only
Number of entries in the spareTable table.
                 otherDiskNumber 1.3.6.1.4.1.789.1.6.7 integer32 read-only
Number of entries in the otherDiskTable table.
                 raidPNumber 1.3.6.1.4.1.789.1.6.8 integer32 read-only
Number of entries in the raidPTable table. This is the number of volumes in the system.
                 otherDiskTable 1.3.6.1.4.1.789.1.6.9 no-access
Display out-of-service disk configuration information.
                     otherDiskEntry 1.3.6.1.4.1.789.1.6.9.1 no-access
Display configuration information for the referenced disk drive.
                         otherDiskIndex 1.3.6.1.4.1.789.1.6.9.1.1 integer32 read-only
A number that identifies this entry for the referenced disk drive in the list of out-of-service diskdrives. Out-of-service disks include all disks that are not in service in a raid group or available as a spare disk.
                         otherDiskDiskName 1.3.6.1.4.1.789.1.6.9.1.2 displaystring read-only
The name identifying the referenced disk drive.
                         otherDiskStatus 1.3.6.1.4.1.789.1.6.9.1.3 integer read-only
The status of the referenced disk drive. Enumeration: 'broken': 1, 'bypassed': 2, 'unknown': 3.
                         otherDiskDiskId 1.3.6.1.4.1.789.1.6.9.1.4 integer32 read-only
The disk identifier for the referenced disk drive.
                         otherDiskScsiAdapter 1.3.6.1.4.1.789.1.6.9.1.5 displaystring read-only
The identifier of the SCSI adapter for the referenced disk drive.
                         otherDiskScsiId 1.3.6.1.4.1.789.1.6.9.1.6 integer32 read-only
The identifier for the referenced disk drive on the referenced SCSI adapter.
                         otherDiskTotalMb 1.3.6.1.4.1.789.1.6.9.1.7 integer32 read-only
The number of MBytes physically available on the referenced disk drive.
                         otherDiskTotalBlocks 1.3.6.1.4.1.789.1.6.9.1.8 integer32 read-only
The number of Blocks physically available on the referenced disk drive.
                         otherDiskDiskPort 1.3.6.1.4.1.789.1.6.9.1.9 integer read-only
A number that indicates which port of the disk is being used by the primary path to the disk. For a dual-ported disk, values of portA and portB indicate which port is being used. If the disk only has a single port, the value is portSingle, and if the port is not active, the value is portNone. Enumeration: 'portNone': 4, 'portSingle': 3, 'portB': 2, 'portA': 1.
                         otherDiskSecondaryDiskName 1.3.6.1.4.1.789.1.6.9.1.10 displaystring read-only
The name identifying the secondary path to the referenced disk drive.
                         otherDiskSecondaryDiskPort 1.3.6.1.4.1.789.1.6.9.1.11 integer read-only
A number that indicates which port of the disk is being used by the secondary path to the disk. For a dual-ported disk, values of portA and portB indicate which port is being used. If the disk only has a single port, the value is portSingle, and if the port is not active, the value is portNone. Enumeration: 'portNone': 4, 'portSingle': 3, 'portB': 2, 'portA': 1.
                         otherDiskShelf 1.3.6.1.4.1.789.1.6.9.1.12 integer32 read-only
Number identifying the shelf where the disk is located.
                         otherDiskBay 1.3.6.1.4.1.789.1.6.9.1.13 integer32 read-only
Number identifying the disk bay within the shelf where the disk is located.
                         otherDiskPool 1.3.6.1.4.1.789.1.6.9.1.14 displaystring read-only
A name that identifies the disk pool that this entry belongs to.
                         otherDiskSectorSize 1.3.6.1.4.1.789.1.6.9.1.15 integer32 read-only
A number that specifies bytes per sector for this entry. Values are '512' or '520'.
                         otherDiskSerialNumber 1.3.6.1.4.1.789.1.6.9.1.16 displaystring read-only
Serial number of the referenced disk drive.
                         otherDiskVendor 1.3.6.1.4.1.789.1.6.9.1.17 displaystring read-only
The vendor of the referenced disk drive.
                         otherDiskModel 1.3.6.1.4.1.789.1.6.9.1.18 displaystring read-only
Model string of the referenced disk drive.
                         otherDiskFirmwareRevision 1.3.6.1.4.1.789.1.6.9.1.19 displaystring read-only
Firmware revision number of the referenced disk drive.
                         otherDiskRPM 1.3.6.1.4.1.789.1.6.9.1.20 displaystring read-only
RPM of the referenced disk drive.
                         otherDiskType 1.3.6.1.4.1.789.1.6.9.1.21 displaystring read-only
Interface type of the referenced disk drive. e.g SCSI, or ATA.
                 raidPTable 1.3.6.1.4.1.789.1.6.10 no-access
Display RAID configuration information.
                       raidPEntry 1.3.6.1.4.1.789.1.6.10.1 no-access
Display RAID configuration information for the referenced volume, plex, raid group, and disk drive.
                           raidPIndex 1.3.6.1.4.1.789.1.6.10.1.1 integer32 read-only
A number that identifies this disk drive within the given volume and RAID group.
                           raidPStatus 1.3.6.1.4.1.789.1.6.10.1.2 integer read-only
The status of the referenced disk drive. Enumeration: 'reconstructionInProgress': 2, 'prefailed': 9, 'parityVerificationInProgress': 4, 'failed': 6, 'parityReconstructionInProgress': 3, 'scrubbingInProgress': 5, 'active': 1, 'offline': 10.
                           raidPVol 1.3.6.1.4.1.789.1.6.10.1.3 integer32 read-only
A number that identifies the volume that this entry belongs to. The first volume is '1'.
                           raidPPlex 1.3.6.1.4.1.789.1.6.10.1.4 integer32 read-only
A number that identifies the plex that this entry belongs to. The first plex is '1'.
                           raidPGroup 1.3.6.1.4.1.789.1.6.10.1.5 integer32 read-only
A number that identifies the RAID group within the given plex that this entry belongs to. The first RAID group is '1'.
                           raidPPlexNumber 1.3.6.1.4.1.789.1.6.10.1.6 integer32 read-only
The number of plexes within this volume. This number is always 1 or 2.
                           raidPGroupNumber 1.3.6.1.4.1.789.1.6.10.1.7 integer32 read-only
The number of RAID groups within this plex.
                           raidPDiskNumber 1.3.6.1.4.1.789.1.6.10.1.8 integer32 read-only
The number of disks within this RAID group.
                           raidPPlexName 1.3.6.1.4.1.789.1.6.10.1.9 displaystring read-only
A name that identifies the plex that this entry belongs to. A plex name can be anything, but is usually a string like 'plex0' or 'plex1'.
                           raidPDiskName 1.3.6.1.4.1.789.1.6.10.1.10 displaystring read-only
The name identifying the referenced disk drive.
                           raidPDiskPort 1.3.6.1.4.1.789.1.6.10.1.11 integer read-only
A number that indicates which port of the disk is being used by the primary path to the disk. For a dual-ported disk, values of portA and portB indicate which port is being used. If the disk only has a single port, the value is portSingle, and if the port is not active, the value is portNone. Enumeration: 'portNone': 4, 'portSingle': 3, 'portB': 2, 'portA': 1.
                           raidPSecondaryDiskName 1.3.6.1.4.1.789.1.6.10.1.12 displaystring read-only
The name identifying the secondary path to the referenced disk drive.
                           raidPSecondaryDiskPort 1.3.6.1.4.1.789.1.6.10.1.13 integer read-only
A number that indicates which port of the disk is being used by the secondary path to the disk. For a dual-ported disk, values of portA and portB indicate which port is being used. If the disk only has a single port, the value is portSingle, and if the port is not active, the value is portNone. Enumeration: 'portNone': 4, 'portSingle': 3, 'portB': 2, 'portA': 1.
                           raidPScsiAdapter 1.3.6.1.4.1.789.1.6.10.1.14 displaystring read-only
The identifier of the SCSI adapter for the referenced disk drive.
                           raidPScsiId 1.3.6.1.4.1.789.1.6.10.1.15 integer32 read-only
The identifier for the referenced disk drive on the referenced SCSI adapter.
                           raidPDiskId 1.3.6.1.4.1.789.1.6.10.1.16 integer32 read-only
The disk identifier for the referenced disk drive.
                           raidPShelf 1.3.6.1.4.1.789.1.6.10.1.17 integer32 read-only
Number identifying the shelf where the disk is located.
                           raidPBay 1.3.6.1.4.1.789.1.6.10.1.18 integer32 read-only
Number identifying the disk bay within the shelf where the disk is located.
                           raidPSectorSize 1.3.6.1.4.1.789.1.6.10.1.19 integer32 read-only
A number that specifies bytes per sector for this entry. Values are '512' or '520'.
                           raidPUsedMb 1.3.6.1.4.1.789.1.6.10.1.20 integer32 read-only
The number of MBytes currently in use on the referenced disk drive.
                           raidPUsedBlocks 1.3.6.1.4.1.789.1.6.10.1.21 integer32 read-only
The number of Blocks currently in use on the referenced disk drive.
                           raidPTotalMb 1.3.6.1.4.1.789.1.6.10.1.22 integer32 read-only
The number of MBytes physically available on the referenced disk drive.
                           raidPTotalBlocks 1.3.6.1.4.1.789.1.6.10.1.23 integer32 read-only
The number of Blocks physically available on the referenced disk drive.
                           raidPCompletionPerCent 1.3.6.1.4.1.789.1.6.10.1.24 integer32 read-only
In the case when rapid raid recovery, disk copy, reconstruction or adding a spare, verification or scrubbing is in progress, the percent of such copy, reconstruction, verification or scrubbing that has been completed on the referenced disk drive.
                           raidPDiskSerialNumber 1.3.6.1.4.1.789.1.6.10.1.25 displaystring read-only
Serial number of the referenced disk drive.
                           raidPDiskVendor 1.3.6.1.4.1.789.1.6.10.1.26 displaystring read-only
The vendor of the referenced disk drive.
                           raidPDiskModel 1.3.6.1.4.1.789.1.6.10.1.27 displaystring read-only
Model string of the referenced disk drive.
                           raidPDiskFirmwareRevision 1.3.6.1.4.1.789.1.6.10.1.28 displaystring read-only
Firmware revision number of the referenced disk drive.
                           raidPDiskRPM 1.3.6.1.4.1.789.1.6.10.1.29 displaystring read-only
RPM of the referenced disk drive.
                           raidPDiskType 1.3.6.1.4.1.789.1.6.10.1.30 displaystring read-only
Interface type of the referenced disk drive. e.g SCSI, or ATA.
                           raidPDiskPool 1.3.6.1.4.1.789.1.6.10.1.31 displaystring read-only
A name that identifies the disk pool that this entry belongs to.
                           raidPDiskCopyDestDiskName 1.3.6.1.4.1.789.1.6.10.1.32 displaystring read-only
When raidPStatus value is prefailed, this string identifies the name of the disk which is the copy target of the referenced prefailed disk.
                 plexTable 1.3.6.1.4.1.789.1.6.11 no-access
A table containing plex specific information.
                       plexEntry 1.3.6.1.4.1.789.1.6.11.1 no-access
Provide a report on file system plexes.
                           plexIndex 1.3.6.1.4.1.789.1.6.11.1.1 integer32 read-only
A number that identifies this entry for the referenced plex.
                           plexName 1.3.6.1.4.1.789.1.6.11.1.2 displaystring read-only
The identifier of the plex.
                           plexVolName 1.3.6.1.4.1.789.1.6.11.1.3 displaystring read-only
The volume to which this plex belongs.
                           plexStatus 1.3.6.1.4.1.789.1.6.11.1.4 integer read-only
The status of the plex. Enumeration: 'offline': 1, 'online': 3, 'resyncing': 2.
                           plexPercentResyncing 1.3.6.1.4.1.789.1.6.11.1.5 integer32 read-only
If the plex is resyncing, the percent completion of the resync.
                 outOfDateDiskCount 1.3.6.1.4.1.789.1.6.12 integer32 read-only
Number of entries in the outOfDateDiskTable table.
                 outOfDateDiskTable 1.3.6.1.4.1.789.1.6.13 no-access
Display out-of-date disk information.
                       outOfDateDiskEntry 1.3.6.1.4.1.789.1.6.13.1 no-access
Display information for the referenced out-of-date disk.
                           outOfDateDiskIndex 1.3.6.1.4.1.789.1.6.13.1.1 integer32 read-only
A number that identifies this entry for the referenced disk drive in the list of out-of-date diskdrives.
                           outOfDateDiskDiskName 1.3.6.1.4.1.789.1.6.13.1.2 displaystring read-only
The name identifying the referenced disk drive.
                           outOfDateDiskDiskId 1.3.6.1.4.1.789.1.6.13.1.3 integer32 read-only
The disk identifier for the referenced disk drive.
                           outOfDateDiskScsiAdapter 1.3.6.1.4.1.789.1.6.13.1.4 displaystring read-only
The identifier of the SCSI adapter for the referenced disk drive.
                           outOfDateDiskScsiId 1.3.6.1.4.1.789.1.6.13.1.5 integer32 read-only
The identifier for the referenced disk drive on the referenced SCSI adapter.
                           outOfDateDiskTotalMb 1.3.6.1.4.1.789.1.6.13.1.6 integer32 read-only
The number of MBytes physically available on the referenced disk drive.
                           outOfDateDiskTotalBlocks 1.3.6.1.4.1.789.1.6.13.1.7 integer32 read-only
The number of Blocks physically available on the referenced disk drive.
                           outOfDateDiskDiskPort 1.3.6.1.4.1.789.1.6.13.1.8 integer read-only
A number that indicates which port of the disk is being used by the primary path to the disk. For a dual-ported disk, values of portA and portB indicate which port is being used. If the disk only has a single port, the value is portSingle, and if the port is not active, the value is portNone. Enumeration: 'portNone': 4, 'portSingle': 3, 'portB': 2, 'portA': 1.
                           outOfDateDiskSecondaryDiskName 1.3.6.1.4.1.789.1.6.13.1.9 displaystring read-only
The name identifying the secondary path to the referenced disk drive.
                           outOfDateDiskSecondaryDiskPort 1.3.6.1.4.1.789.1.6.13.1.10 integer read-only
A number that indicates which port of the disk is being used by the secondary path to the disk. For a dual-ported disk, values of portA and portB indicate which port is being used. If the disk only has a single port, the value is portSingle, and if the port is not active, the value is portNone. Enumeration: 'portNone': 4, 'portSingle': 3, 'portB': 2, 'portA': 1.
                           outOfDateDiskShelf 1.3.6.1.4.1.789.1.6.13.1.11 integer32 read-only
Number identifying the shelf where the disk is located.
                           outOfDateDiskBay 1.3.6.1.4.1.789.1.6.13.1.12 integer32 read-only
Number identifying the disk bay within the shelf where the disk is located.
                           outOfDateDiskPool 1.3.6.1.4.1.789.1.6.13.1.13 displaystring read-only
A name that identifies the disk pool that this entry belongs to.
                           outOfDateDiskSectorSize 1.3.6.1.4.1.789.1.6.13.1.14 integer32 read-only
A number that specifies bytes per sector for this entry. Values are '512' or '520'.
                           outOfDateDiskSerialNumber 1.3.6.1.4.1.789.1.6.13.1.15 displaystring read-only
Serial number of the referenced disk drive.
                           outOfDateDiskVendor 1.3.6.1.4.1.789.1.6.13.1.16 displaystring read-only
The vendor of the referenced disk drive.
                           outOfDateDiskModel 1.3.6.1.4.1.789.1.6.13.1.17 displaystring read-only
Model string of the referenced disk drive.
                           outOfDateDiskFirmwareRevision 1.3.6.1.4.1.789.1.6.13.1.18 displaystring read-only
Firmware revision number of the referenced disk drive.
                           outOfDateDiskRPM 1.3.6.1.4.1.789.1.6.13.1.19 displaystring read-only
RPM of the referenced disk drive.
                           outOfDateDiskType 1.3.6.1.4.1.789.1.6.13.1.20 displaystring read-only
Interface type of the referenced disk drive. e.g SCSI, or ATA.
             cifs 1.3.6.1.4.1.789.1.7
                 cifsOptions 1.3.6.1.4.1.789.1.7.1
                     cifsIsEnabled 1.3.6.1.4.1.789.1.7.1.1 integer read-only
Whether the CIFS protocol is active on the filer. Enumeration: 'true': 2, 'false': 1.
                     cifsIsLoginEnabled 1.3.6.1.4.1.789.1.7.1.2 integer read-only
Whether new CIFS connections to the filer are currently allowed. Enumeration: 'true': 2, 'false': 1.
                     cifsHostName 1.3.6.1.4.1.789.1.7.1.3 displaystring read-only
The host name used by the CIFS protocol on this filer.
                     cifsAltNames 1.3.6.1.4.1.789.1.7.1.4 displaystring read-only
Alternate names recognized by the filer.
                     cifsDomainJoined 1.3.6.1.4.1.789.1.7.1.5 integer read-only
Has the filer joined an NT domain? If this value is true, cifsDomainName will contain the name of the domain. Otherwise, the filer may have joined a WorkGroup, and cifsWGName will contain the name of the WorkGroup. Enumeration: 'true': 2, 'false': 1.
                     cifsDomainName 1.3.6.1.4.1.789.1.7.1.6 displaystring read-only
The domain name used by the CIFS protocol on this filer.
                     cifsWGName 1.3.6.1.4.1.789.1.7.1.7 displaystring read-only
The workgroup name (if any) used by the CIFS protocol on this filer.
                     cifsDCName 1.3.6.1.4.1.789.1.7.1.8 displaystring read-only
The name of the Domain Controller used by this filer to authenticate users and file requests.
                     cifsIsWinsEnabled 1.3.6.1.4.1.789.1.7.1.9 integer read-only
True if WINS name resolution is enabled on the filer. Enumeration: 'true': 2, 'false': 1.
                     cifsWinsServers 1.3.6.1.4.1.789.1.7.1.10 displaystring read-only
The name(s) of the WINS servers registered with the filer.
                     cifsSecurityModel 1.3.6.1.4.1.789.1.7.1.11 integer read-only
Which type of authentication semantics (Unix or PC) are in use for PC access to Unix files on the filer. If Unix semantics are in use, no ACL on a Unix file is ever checked. If PC semantics are in use, the share level ACL on the share containing the file is used for authentication instead of the group portion of the permissions on the file. Enumeration: 'pc': 2, 'unix': 1.
                     cifsPCGenericUser 1.3.6.1.4.1.789.1.7.1.12 displaystring read-only
The name of the generic PC user, if any. This username is used for CIFS access by Unix users who have not authenticated through CIFS or NT.
                     cifsOplocksEnabled 1.3.6.1.4.1.789.1.7.1.15 integer read-only
Whether oplocks are enabled on the filer. Enumeration: 'enabled': 2, 'notEnabled': 1.
                     cifsLevel2OplocksEnabled 1.3.6.1.4.1.789.1.7.1.16 integer read-only
Whether level 2 oplocks are enabled on the filer. Enumeration: 'enabled': 2, 'notEnabled': 1.
                     cifsPreserveCase 1.3.6.1.4.1.789.1.7.1.17 integer read-only
If this option is set to preserve-case (the default), all filename references will be case preserving. Otherwise, they are forced to lowercase. Enumeration: 'preserveCase': 2, 'noPreserveCase': 1.
                     cifsSymlinksEnabled 1.3.6.1.4.1.789.1.7.1.19 integer read-only
If this option is enabled, CIFS accesses will follow symbolic links using Unix semantics. Enumeration: 'enabled': 2, 'notEnabled': 1.
                     cifsSymlinkCycleProtEnabled 1.3.6.1.4.1.789.1.7.1.20 integer read-only
If this option is enabled, CIFS accesses will through symbolic links will check for cycles in the link graph. Enumeration: 'enabled': 2, 'notEnabled': 1.
                     cifsIsLicensed 1.3.6.1.4.1.789.1.7.1.21 integer read-only
Whether the CIFS protocol is licensed on the filer. Enumeration: 'true': 2, 'false': 1.
                     cifsPerClientStatsEnabled 1.3.6.1.4.1.789.1.7.1.22 integer read-only
True when cifs.per_client_stats are being collected. Enumeration: 'true': 2, 'false': 1.
                 cifsInfo 1.3.6.1.4.1.789.1.7.2
                     cifsStatus 1.3.6.1.4.1.789.1.7.2.1 integer32 read-only
Encoding of CIFS startup state on the filer.
                     cifsNeedPW 1.3.6.1.4.1.789.1.7.2.2 integer32 read-only
Does the administrative password need to be set before start?
                     cifsTimeToShutdown 1.3.6.1.4.1.789.1.7.2.3 integer32 read-only
Time remaining until CIFS shutdown
                     cifsMaxConnections 1.3.6.1.4.1.789.1.7.2.4 integer32 read-only
The maximum number of simultaneous CIFS connections allowed on the filer.
                     cifsMaxTrees 1.3.6.1.4.1.789.1.7.2.5 integer32 read-only
The maximum number of simultaneous CIFS trees allowed on the filer.
                     cifsMaxShares 1.3.6.1.4.1.789.1.7.2.6 integer32 read-only
The maximum number of simultaneous CIFS shares allowed on the filer.
                     cifsMaxFiles 1.3.6.1.4.1.789.1.7.2.7 integer32 read-only
The maximum number of concurrently open CIFS files and directories allowed on the filer.
                     cifsMaxACLs 1.3.6.1.4.1.789.1.7.2.8 integer32 read-only
This object is deprecated, and always has a value of 0.
                     cifsConnectedUsers 1.3.6.1.4.1.789.1.7.2.9 counter32 read-only
The current number of CIFS users on the filer.
                     cifsNTrees 1.3.6.1.4.1.789.1.7.2.10 counter32 read-only
The current number of CIFS trees on the filer.
                     cifsNShares 1.3.6.1.4.1.789.1.7.2.11 counter32 read-only
The current number of CIFS shares on the filer.
                     cifsNSessions 1.3.6.1.4.1.789.1.7.2.12 counter32 read-only
The current number of active CIFS sessions on the filer.
                     cifsNOpenFiles 1.3.6.1.4.1.789.1.7.2.13 counter32 read-only
The number of open CIFS files and directories on the filer.
                     cifsNOpenDirs 1.3.6.1.4.1.789.1.7.2.14 counter32 read-only
The number of open CIFS directories on the filer.
                     cifsNOplockBreakWaits 1.3.6.1.4.1.789.1.7.2.16 counter32 read-only
The number of open files waiting for oplock break messages to be sent.
                     cifsNOplockAckWaits 1.3.6.1.4.1.789.1.7.2.17 counter32 read-only
The number of open files waiting for acknowledgements to oplock break messages.
                     cifsSuspectOps 1.3.6.1.4.1.789.1.7.2.18 integer32 read-only
A smoothed average of the number of events per second of the type frequently seen during virus attacks.
                     cifsNDomainControllers 1.3.6.1.4.1.789.1.7.2.19 integer32 read-only
The number of Domain Controllers found.
                 cifsStats 1.3.6.1.4.1.789.1.7.3
                     cifsServ 1.3.6.1.4.1.789.1.7.3.1
                         cifsOps 1.3.6.1.4.1.789.1.7.3.1.1
                             cifsTotalOps 1.3.6.1.4.1.789.1.7.3.1.1.1 counter32 read-only
The number of CIFS operations done by the filer, since the last time the statistics were cleared.
                             cifsTotalCalls 1.3.6.1.4.1.789.1.7.3.1.1.2 counter32 read-only
The total number of CIFS calls received, since the last time the statistics were cleared. This is the number of cifsTotalOps plus the number of miscellaneous operations that are not logged which were received in that time period.
                             cifsBadCalls 1.3.6.1.4.1.789.1.7.3.1.1.3 counter32 read-only
The total number of received CIFS calls rejected, since the last time the statistics were cleared.
                             cifsGetAttrs 1.3.6.1.4.1.789.1.7.3.1.1.4 counter32 read-only
The total number of CIFS operations to get the attributes on a file or directory, since the last time the statistics were reset.
                             cifsReads 1.3.6.1.4.1.789.1.7.3.1.1.5 counter32 read-only
The total number of CIFS Read operations on a file or directory, since the last time the statistics were reset.
                             cifsWrites 1.3.6.1.4.1.789.1.7.3.1.1.6 counter32 read-only
The total number of CIFS write operations on a file or directory, since the last time the statistics were reset.
                             cifsLocks 1.3.6.1.4.1.789.1.7.3.1.1.7 counter32 read-only
The number of CIFS file locking requests since the last time the statistics were reset.
                             cifsOpens 1.3.6.1.4.1.789.1.7.3.1.1.8 counter32 read-only
The number of calls, via CIFS, to open a file or directory, since the last time the statistics were reset.
                             cifsDirOps 1.3.6.1.4.1.789.1.7.3.1.1.9 counter32 read-only
The number of CIFS directory operations, since the last time the statistics were reset.
                             cifsOthers 1.3.6.1.4.1.789.1.7.3.1.1.10 counter32 read-only
The number of CIFS operations, since the last time the statistics were reset, that don't fall into the categories for GetAttr, Read, Write, Lock, DirOp and Open.
                         cifsReqs 1.3.6.1.4.1.789.1.7.3.1.2
                             smbNegProts 1.3.6.1.4.1.789.1.7.3.1.2.1 counter32 read-only
The number of SMB NEGOTIATE requests, since the last time the statistics were cleared.
                             smbSessionSetupAndXs 1.3.6.1.4.1.789.1.7.3.1.2.2 counter32 read-only
The number of SMB SESSION_SETUP_ANDX requests, since the last time the statistics were cleared.
                             smbLogoffAndXs 1.3.6.1.4.1.789.1.7.3.1.2.3 counter32 read-only
The number of SMB LOGOFF_ANDX requests, since the last time the statistics were cleared.
                             smbTreeConnectAndXs 1.3.6.1.4.1.789.1.7.3.1.2.4 counter32 read-only
The number of SMB TREE_CONNECT_ANDX requests, since the last time the statistics were cleared.
                             smbTreeDisconnects 1.3.6.1.4.1.789.1.7.3.1.2.5 counter32 read-only
The number of SMB TREE_DISCONNECT requests, since the last time the statistics were cleared.
                             smbTrans2QueryFSInfos 1.3.6.1.4.1.789.1.7.3.1.2.6 counter32 read-only
The number of SMB TRANS2_QUERY_FS_INFORMATION requests, since the last time the statistics were cleared.
                             smbEchos 1.3.6.1.4.1.789.1.7.3.1.2.7 counter32 read-only
The number of SMB ECHO requests, since the last time the statistics were cleared.
                             smbNTCancels 1.3.6.1.4.1.789.1.7.3.1.2.8 counter32 read-only
The number of SMB NT_CANCEL requests, since the last time the statistics were cleared.
                             smbNTCreateAndXs 1.3.6.1.4.1.789.1.7.3.1.2.9 counter32 read-only
The number of SMB NT_CREATE_ANDX requests, since the last time the statistics were cleared.
                             smbNTTransactCreates 1.3.6.1.4.1.789.1.7.3.1.2.10 counter32 read-only
The number of SMB NT_TRANSACT_CREATE requests, since the last time the statistics were cleared.
                             smbCreateTemporaries 1.3.6.1.4.1.789.1.7.3.1.2.11 counter32 read-only
The SMB CREATE_TEMPORARY operation is not presently supported, so this value should always be zero.
                             smbReadAndXs 1.3.6.1.4.1.789.1.7.3.1.2.12 counter32 read-only
The number of SMB READ_ANDX requests, since the last time the statistics were cleared.
                             smbWriteAndXs 1.3.6.1.4.1.789.1.7.3.1.2.13 counter32 read-only
The number of SMB WRITE_ANDX requests, since the last time the statistics were cleared.
                             smbLockingAndXs 1.3.6.1.4.1.789.1.7.3.1.2.14 counter32 read-only
The number of SMB LOCKING_ANDX requests, since the last time the statistics were cleared.
                             smbSeeks 1.3.6.1.4.1.789.1.7.3.1.2.15 counter32 read-only
The number of SMB SEEK requests, since the last time the statistics were cleared.
                             smbFlushes 1.3.6.1.4.1.789.1.7.3.1.2.16 counter32 read-only
The number of SMB FLUSH requests, since the last time the statistics were cleared.
                             smbCloses 1.3.6.1.4.1.789.1.7.3.1.2.17 counter32 read-only
The number of SMB CLOSE requests, since the last time the statistics were cleared.
                             smbDeletes 1.3.6.1.4.1.789.1.7.3.1.2.18 counter32 read-only
The number of SMB DELETE requests, since the last time the statistics were cleared.
                             smbRenames 1.3.6.1.4.1.789.1.7.3.1.2.19 counter32 read-only
The number of SMB RENAME requests, since the last time the statistics were cleared.
                             smbMoves 1.3.6.1.4.1.789.1.7.3.1.2.20 counter32 read-only
The SMB MOVE request is not presently supported, so this value should always be zero.
                             smbCopies 1.3.6.1.4.1.789.1.7.3.1.2.21 counter32 read-only
The SMB COPY request is not presently supported, so this value should always be zero.
                             smbTrans2QueryPathInfos 1.3.6.1.4.1.789.1.7.3.1.2.22 counter32 read-only
The number of SMB TRANS2_QUERY_PATH_INFORMATION requests, since the last time the statistics were cleared.
                             smbTrans2QueryFileInfos 1.3.6.1.4.1.789.1.7.3.1.2.23 counter32 read-only
The number of SMB TRANS2_QUERY_FILE_INFORMATION requests, since the last time the statistics were cleared.
                             smbTrans2SetPathInfos 1.3.6.1.4.1.789.1.7.3.1.2.24 counter32 read-only
The number of SMB TRANS2_SET_PATH_INFORMATION requests, since the last time the statistics were cleared.
                             smbTrans2SetFileInfos 1.3.6.1.4.1.789.1.7.3.1.2.25 counter32 read-only
The number of SMB TRANS2_SET_FILE_INFORMATION requests, since the last time the statistics were cleared.
                             smbDeleteDirs 1.3.6.1.4.1.789.1.7.3.1.2.26 counter32 read-only
The number of SMB DELETE_DIRECTORY requests, since the last time the statistics were cleared.
                             smbCheckDirs 1.3.6.1.4.1.789.1.7.3.1.2.27 counter32 read-only
The SMB COPY request is not presently supported, so this value should always be zero.
                             smbTrans2FindFirst2s 1.3.6.1.4.1.789.1.7.3.1.2.28 counter32 read-only
The number of SMB TRANS2_FIND_FIRST2 requests, since the last time the statistics were cleared.
                             smbTrans2FindNext2s 1.3.6.1.4.1.789.1.7.3.1.2.29 counter32 read-only
The number of SMB TRANS2_FIND_NEXT2 requests, since the last time the statistics were cleared.
                             smbFindClose2s 1.3.6.1.4.1.789.1.7.3.1.2.30 counter32 read-only
The number of SMB FIND_CLOSE2 requests, since the last time the statistics were cleared.
                             smbNTTransactNotifyChgs 1.3.6.1.4.1.789.1.7.3.1.2.31 counter32 read-only
The number of SMB NT_TRANSACT_NOTIFY_CHANGE requests, since the last time the statistics were cleared.
                             smbTrans2GetDFSReferrals 1.3.6.1.4.1.789.1.7.3.1.2.32 counter32 read-only
The SMB TRANS2_GET_DFS_REFERRAL request is not presently supported, so this value should always be zero.
                             smbTrans2ReportDFSIncs 1.3.6.1.4.1.789.1.7.3.1.2.33 counter32 read-only
The SMB TRANS2_REPORT_DFS_INCONSISTENCY request is not presently supported, so this value should always be zero.
                             smbOpenPrintFiles 1.3.6.1.4.1.789.1.7.3.1.2.34 counter32 read-only
The SMB OPEN_PRINT_FILE request is not supported, so this value should always be zero.
                             smbGetPrintQueues 1.3.6.1.4.1.789.1.7.3.1.2.35 counter32 read-only
The SMB GET_PRINT_QUEUE request is not supported, so this value should always be zero.
                             smbNTTransactIoctls 1.3.6.1.4.1.789.1.7.3.1.2.36 counter32 read-only
The number of SMB NT_TRANSACT_IOCTL requests, since the last time the statistics were cleared.
                             smbNTTransactQuerySecDescs 1.3.6.1.4.1.789.1.7.3.1.2.37 counter32 read-only
The number of SMB NT_TRANSACT_QUERY_SECURITY_DESC requests, since the last time the statistics were cleared.
                             smbNTTransactSetSecDescs 1.3.6.1.4.1.789.1.7.3.1.2.38 counter32 read-only
The number of SMB NT_TRANSACT_SET_SECURITY_DESC requests, since the last time the statistics were cleared.
                             smbTrans2CreateDirs 1.3.6.1.4.1.789.1.7.3.1.2.39 counter32 read-only
The number of SMB TRANS2_CREATE_DIRECTORY requests, since the last time the statistics were cleared.
                             smbNTCancelCNs 1.3.6.1.4.1.789.1.7.3.1.2.40 counter32 read-only
The number of SMB NT_CANCEL requests against change notifications since the last time the statistics were cleared.
                             smbNTCancelOthers 1.3.6.1.4.1.789.1.7.3.1.2.41 counter32 read-only
The number of SMB NT_CANCEL requests against operations other than change notifications, since the last time the statistics were cleared.
                         cifsPercent 1.3.6.1.4.1.789.1.7.3.1.3
                             smbNegProtPct 1.3.6.1.4.1.789.1.7.3.1.3.1 integer32 read-only
The number of SMB NEGOTIATE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbSessionSetupAndXPct 1.3.6.1.4.1.789.1.7.3.1.3.2 integer32 read-only
The number of SMB SESSION_SETUP_ANDX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbLogoffAndXPct 1.3.6.1.4.1.789.1.7.3.1.3.3 integer32 read-only
The number of SMB LOGOFF_ANDX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbTreeConnectAndXPct 1.3.6.1.4.1.789.1.7.3.1.3.4 integer32 read-only
The number of SMB TREE_CONNECT_ANDX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbTreeDisconnectAndXPct 1.3.6.1.4.1.789.1.7.3.1.3.5 integer32 read-only
The number of SMB TREE_DISCONNECT_ANDX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbTrans2QueryFSInfoPct 1.3.6.1.4.1.789.1.7.3.1.3.6 integer32 read-only
The number of SMB TRANS2_QUERY_FS_INFORMATION requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbEchoPct 1.3.6.1.4.1.789.1.7.3.1.3.7 integer32 read-only
The number of SMB ECHO requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbNTCancelPct 1.3.6.1.4.1.789.1.7.3.1.3.8 integer32 read-only
The number of SMB NT_CANCEL requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbCreateAndXPct 1.3.6.1.4.1.789.1.7.3.1.3.9 integer32 read-only
The number of SMB NT_CREATE_ANDX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbTransactCreatePct 1.3.6.1.4.1.789.1.7.3.1.3.10 integer32 read-only
The number of SMB NT_TRANSACT_CREATE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbCreateTemporaryPct 1.3.6.1.4.1.789.1.7.3.1.3.11 integer32 read-only
The number of SMB CREATE_TEMPORARY requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbReadAndXPct 1.3.6.1.4.1.789.1.7.3.1.3.12 integer32 read-only
The number of SMB READ_ANDX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbWriteAndXPct 1.3.6.1.4.1.789.1.7.3.1.3.13 integer32 read-only
The number of SMB WRITE_ANDX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbLockingAndXPct 1.3.6.1.4.1.789.1.7.3.1.3.14 integer32 read-only
The number of SMB LOCKING_ANDX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbSeekPct 1.3.6.1.4.1.789.1.7.3.1.3.15 integer32 read-only
The number of SMB SEEK requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbFlushPct 1.3.6.1.4.1.789.1.7.3.1.3.16 integer32 read-only
The number of SMB FLUSH requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbClosePct 1.3.6.1.4.1.789.1.7.3.1.3.17 integer32 read-only
The number of SMB CLOSE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbDeletePct 1.3.6.1.4.1.789.1.7.3.1.3.18 integer32 read-only
The number of SMB DELETE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbRenamePct 1.3.6.1.4.1.789.1.7.3.1.3.19 integer32 read-only
The number of SMB RENAME requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbMovePct 1.3.6.1.4.1.789.1.7.3.1.3.20 integer32 read-only
The number of SMB MOVE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbCopyPct 1.3.6.1.4.1.789.1.7.3.1.3.21 integer32 read-only
The number of SMB COPY requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbTrans2QueryPathInfoPct 1.3.6.1.4.1.789.1.7.3.1.3.22 integer32 read-only
The number of SMB TRANS2_QUERY_PATH_INFORMATION requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbTrans2QueryFileInfoPct 1.3.6.1.4.1.789.1.7.3.1.3.23 integer32 read-only
The number of SMB TRANS2_QUERY_FILE_INFORMATION requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbTrans2SetPathInfoPct 1.3.6.1.4.1.789.1.7.3.1.3.24 integer32 read-only
The number of SMB TRANS2_SET_PATH_INFORMATION requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbTrans2SetFileInfoPct 1.3.6.1.4.1.789.1.7.3.1.3.25 integer32 read-only
The number of SMB TRANS2_SET_FILE_INFORMATION requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbDeleteDirPct 1.3.6.1.4.1.789.1.7.3.1.3.26 integer32 read-only
The number of SMB DELETE_DIRECTORY requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbCheckDirPct 1.3.6.1.4.1.789.1.7.3.1.3.27 integer32 read-only
The number of SMB CHECK_DIRECTORY requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbTrans2FindFirst2Pct 1.3.6.1.4.1.789.1.7.3.1.3.28 integer32 read-only
The number of SMB TRANS2_FIND_FIRST2 requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbTrans2FindNext2Pct 1.3.6.1.4.1.789.1.7.3.1.3.29 integer32 read-only
The number of SMB TRANS2_FIND_NEXT2 requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbFindClose2Pct 1.3.6.1.4.1.789.1.7.3.1.3.30 integer32 read-only
The number of SMB FIND_CLOSE2 requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbNTTransactNotifyChgPct 1.3.6.1.4.1.789.1.7.3.1.3.31 integer32 read-only
The number of SMB NT_TRANSACT_NOTIFY_CHANGE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbTrans2GetDFSReferralPct 1.3.6.1.4.1.789.1.7.3.1.3.32 integer32 read-only
The number of SMB TRANS2_GET_DFS_REFERRAL requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbTrans2ReportDFSIncPct 1.3.6.1.4.1.789.1.7.3.1.3.33 integer32 read-only
The number of SMB TRANS2_REPORT_DFS_INCONSISTENCY requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbOpenPrintFilePct 1.3.6.1.4.1.789.1.7.3.1.3.34 integer32 read-only
The number of SMB OPEN_PRINT_FILE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbGetPrintQueuePct 1.3.6.1.4.1.789.1.7.3.1.3.35 integer32 read-only
The number of SMB GET_PRINT_QUEUE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbNTTransactIoctlPct 1.3.6.1.4.1.789.1.7.3.1.3.36 integer32 read-only
The number of SMB NT_TRANSACT_IOCTL requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbNTTransactQuerySecDescPct 1.3.6.1.4.1.789.1.7.3.1.3.37 integer32 read-only
The number of SMB NT_TRANSACT_QUERY_SECURITY_DESC requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbNTTransactSetSecDescPct 1.3.6.1.4.1.789.1.7.3.1.3.38 integer32 read-only
The number of SMB NT_TRANSACT_SET_SECURITY_DESC requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbTrans2CreateDirPct 1.3.6.1.4.1.789.1.7.3.1.3.39 integer32 read-only
The number of SMB TRANS2_CREATE_DIRECTORY requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbNTCancelCNPct 1.3.6.1.4.1.789.1.7.3.1.3.40 integer32 read-only
The number of SMB NT_CANCEL requests against change notifications, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             smbNTCancelOtherPct 1.3.6.1.4.1.789.1.7.3.1.3.41 integer32 read-only
The number of SMB NT_CANCEL requests against calls other than change notifications, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                         cifsObsReqs 1.3.6.1.4.1.789.1.7.3.1.4
                             obsSmbClosePrintFiles 1.3.6.1.4.1.789.1.7.3.1.4.1 counter32 read-only
The number of SMB CLOSE_PRINT_FILE requests, since the last time the statistics were cleared.
                             obsSmbCreates 1.3.6.1.4.1.789.1.7.3.1.4.2 counter32 read-only
The number of SMB CREATE requests, since the last time the statistics were cleared.
                             obsSmbCreateDirs 1.3.6.1.4.1.789.1.7.3.1.4.3 counter32 read-only
The number of SMB CREATE_DIRECTORY requests, since the last time the statistics were cleared.
                             obsSmbCreateNews 1.3.6.1.4.1.789.1.7.3.1.4.4 counter32 read-only
The number of SMB CREATE_NEW requests, since the last time the statistics were cleared.
                             obsSmbLockAndReads 1.3.6.1.4.1.789.1.7.3.1.4.5 counter32 read-only
The number of SMB LOCK_AND_READ requests, since the last time the statistics were cleared.
                             obsSmbLockByteRanges 1.3.6.1.4.1.789.1.7.3.1.4.6 counter32 read-only
The number of SMB LOCK_BYTE_RANGE requests, since the last time the statistics were cleared.
                             obsSmbOpens 1.3.6.1.4.1.789.1.7.3.1.4.7 counter32 read-only
The number of SMB OPEN requests, since the last time the statistics were cleared.
                             obsSmbOpenAndXs 1.3.6.1.4.1.789.1.7.3.1.4.8 counter32 read-only
The number of SMB OPEN_ANDX requests, since the last time the statistics were cleared.
                             obsSmbProcessExits 1.3.6.1.4.1.789.1.7.3.1.4.9 counter32 read-only
The number of SMB PROCESS_EXIT requests, since the last time the statistics were cleared.
                             obsSmbQueryInfos 1.3.6.1.4.1.789.1.7.3.1.4.10 counter32 read-only
The number of SMB QUERY_INFORMATION requests, since the last time the statistics were cleared.
                             obsSmbQueryInfo2s 1.3.6.1.4.1.789.1.7.3.1.4.11 counter32 read-only
The number of SMB QUERY_INFORMATION2 requests, since the last time the statistics were cleared.
                             obsSmbReads 1.3.6.1.4.1.789.1.7.3.1.4.12 counter32 read-only
The number of SMB READ requests, since the last time the statistics were cleared.
                             obsSmbReadMPXs 1.3.6.1.4.1.789.1.7.3.1.4.13 counter32 read-only
The SMB READ_MPX request is not supported, so this value should always be zero.
                             obsSmbReadRaws 1.3.6.1.4.1.789.1.7.3.1.4.14 counter32 read-only
The number of SMB READ_RAW requests, since the last time the statistics were cleared.
                             obsSmbSearchs 1.3.6.1.4.1.789.1.7.3.1.4.15 counter32 read-only
The number of SMB SEARCH requests, since the last time the statistics were cleared.
                             obsSmbSetInfos 1.3.6.1.4.1.789.1.7.3.1.4.16 counter32 read-only
The number of SMB SET_INFORMATION requests, since the last time the statistics were cleared.
                             obsSmbSetInfo2s 1.3.6.1.4.1.789.1.7.3.1.4.17 counter32 read-only
The number of SMB SET_INFORMATION2 requests, since the last time the statistics were cleared.
                             obsSmbQueryInfoDisks 1.3.6.1.4.1.789.1.7.3.1.4.18 counter32 read-only
The number of SMB QUERY_INFORMATION_DISK requests, since the last time the statistics were cleared.
                             obsSmbTrans2Open2s 1.3.6.1.4.1.789.1.7.3.1.4.19 counter32 read-only
The number of SMB TRANS2_OPEN2 requests, since the last time the statistics were cleared.
                             obsSmbTreeConnects 1.3.6.1.4.1.789.1.7.3.1.4.20 counter32 read-only
The number of SMB TREE_CONNECT requests, since the last time the statistics were cleared.
                             obsSmbUnlockByteRanges 1.3.6.1.4.1.789.1.7.3.1.4.21 counter32 read-only
The number of SMB UNLOCK_BYTE_RANGE requests, since the last time the statistics were cleared.
                             obsSmbWrites 1.3.6.1.4.1.789.1.7.3.1.4.22 counter32 read-only
The number of SMB WRITE requests, since the last time the statistics were cleared.
                             obsSmbWriteAndUnlocks 1.3.6.1.4.1.789.1.7.3.1.4.23 counter32 read-only
The number of SMB WRITE_AND_UNLOCK requests, since the last time the statistics were cleared.
                             obsSmbWriteAndCloses 1.3.6.1.4.1.789.1.7.3.1.4.24 counter32 read-only
The number of SMB WRITE_AND_CLOSE requests, since the last time the statistics were cleared.
                             obsSmbWriteMPXs 1.3.6.1.4.1.789.1.7.3.1.4.25 counter32 read-only
The SMB WRITE_MPX request is not supported, so this value should always be zero.
                             obsSmbWritePrintFiles 1.3.6.1.4.1.789.1.7.3.1.4.26 counter32 read-only
The SMB WRITE_PRINT_FILE request is not supported, so this value should always be zero.
                             obsSmbWriteRaws 1.3.6.1.4.1.789.1.7.3.1.4.27 counter32 read-only
The number of SMB WRITE_RAW requests, since the last time the statistics were cleared.
                         cifsObsPercent 1.3.6.1.4.1.789.1.7.3.1.5
                             obsSmbClosePrintFilePct 1.3.6.1.4.1.789.1.7.3.1.5.1 integer32 read-only
The number of SMB CLOSE_PRINT_FILE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             obsSmbCreatePct 1.3.6.1.4.1.789.1.7.3.1.5.2 integer32 read-only
The number of SMB CREATE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             obsSmbCreateDirPct 1.3.6.1.4.1.789.1.7.3.1.5.3 integer32 read-only
The number of SMB CREATE_DIRECTORY requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             obsSmbCreateNewPct 1.3.6.1.4.1.789.1.7.3.1.5.4 integer32 read-only
The number of SMB CREATE_NEW requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             obsSmbLockAndReadPct 1.3.6.1.4.1.789.1.7.3.1.5.5 integer32 read-only
The number of SMB LOCK_AND_READ requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             obsSmbLockByteRangePct 1.3.6.1.4.1.789.1.7.3.1.5.6 integer32 read-only
The number of SMB LOCK_BYTE_RANGE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             obsSmbOpenPct 1.3.6.1.4.1.789.1.7.3.1.5.7 integer32 read-only
The number of SMB OPEN requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             obsSmbOpenAndXPct 1.3.6.1.4.1.789.1.7.3.1.5.8 integer32 read-only
The number of SMB OPEN_ANDX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             obsSmbProcessExitPct 1.3.6.1.4.1.789.1.7.3.1.5.9 integer32 read-only
The number of SMB PROCESS_EXIT requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             obsSmbQueryInfoPct 1.3.6.1.4.1.789.1.7.3.1.5.10 integer32 read-only
The number of SMB QUERY_INFORMATION requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             obsSmbQueryInfo2Pct 1.3.6.1.4.1.789.1.7.3.1.5.11 integer32 read-only
The number of SMB QUERY_INFORMATION2 requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             obsSmbReadPct 1.3.6.1.4.1.789.1.7.3.1.5.12 integer32 read-only
The number of SMB READ requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             obsSmbReadMPXPct 1.3.6.1.4.1.789.1.7.3.1.5.13 integer32 read-only
The number of SMB READ_MPX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             obsSmbReadRawPct 1.3.6.1.4.1.789.1.7.3.1.5.14 integer32 read-only
The number of SMB READ_RAW requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             obsSmbSearchPct 1.3.6.1.4.1.789.1.7.3.1.5.15 integer32 read-only
The number of SMB SEARCH requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             obsSmbSetInfoPct 1.3.6.1.4.1.789.1.7.3.1.5.16 integer32 read-only
The number of SMB SET_INFORMATION requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             obsSmbSetInfo2Pct 1.3.6.1.4.1.789.1.7.3.1.5.17 integer32 read-only
The number of SMB SET_INFORMATION2 requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             obsSmbQueryInfoDiskPct 1.3.6.1.4.1.789.1.7.3.1.5.18 integer32 read-only
The number of SMB QUERY_INFORMATION_DISK requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             obsSmbTrans2Open2Pct 1.3.6.1.4.1.789.1.7.3.1.5.19 integer32 read-only
The number of SMB TRANS2_OPEN2 requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             obsSmbTreeConnectPct 1.3.6.1.4.1.789.1.7.3.1.5.20 integer32 read-only
The number of SMB TREE_CONNECT requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             obsSmbUnlockByteRangePct 1.3.6.1.4.1.789.1.7.3.1.5.21 integer32 read-only
The number of SMB UNLOCK_BYTE_RANGE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             obsSmbWritePct 1.3.6.1.4.1.789.1.7.3.1.5.22 integer32 read-only
The number of SMB WRITE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             obsSmbWriteAndUnlockPct 1.3.6.1.4.1.789.1.7.3.1.5.23 integer32 read-only
The number of SMB WRITE_AND_UNLOCK requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             obsSmbWriteAndClosePct 1.3.6.1.4.1.789.1.7.3.1.5.24 integer32 read-only
The number of SMB WRITE_AND_CLOSE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             obsSmbWriteMPXPct 1.3.6.1.4.1.789.1.7.3.1.5.25 integer32 read-only
The number of SMB WRITE_MPX requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             obsSmbWritePrintFilePct 1.3.6.1.4.1.789.1.7.3.1.5.26 integer32 read-only
The number of SMB WRITE_PRINT_FILE requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                             obsSmbWriteRawPct 1.3.6.1.4.1.789.1.7.3.1.5.27 integer32 read-only
The number of SMB WRITE_RAW requests, as a percentage of total CIFS calls received, since the last time the statistics were cleared.
                 cifsMisc 1.3.6.1.4.1.789.1.7.4
                     cifsCancelLocks 1.3.6.1.4.1.789.1.7.4.1 counter32 read-only
Undocumented
                     cifsWaitLocks 1.3.6.1.4.1.789.1.7.4.2 counter32 read-only
Undocumented
                     cifsCopyToAligns 1.3.6.1.4.1.789.1.7.4.3 counter32 read-only
Undocumented
                     cifsAlignedSmalls 1.3.6.1.4.1.789.1.7.4.4 counter32 read-only
Undocumented
                     cifsAlignedLarges 1.3.6.1.4.1.789.1.7.4.5 counter32 read-only
Undocumented
                     cifsAlignedSmallRels 1.3.6.1.4.1.789.1.7.4.6 counter32 read-only
Undocumented
                     cifsAlignedLargeRels 1.3.6.1.4.1.789.1.7.4.7 counter32 read-only
Undocumented
                     cifsMbufWaits 1.3.6.1.4.1.789.1.7.4.8 counter32 read-only
Undocumented
                     cifsNbtWaits 1.3.6.1.4.1.789.1.7.4.9 counter32 read-only
Undocumented
                     cifsCwaWaits 1.3.6.1.4.1.789.1.7.4.10 counter32 read-only
Undocumented
                     cifsMultipleVCs 1.3.6.1.4.1.789.1.7.4.11 counter32 read-only
Undocumented
                     cifsPDCUpcalls 1.3.6.1.4.1.789.1.7.4.12 counter32 read-only
Undocumented
                     cifsQueuedWriteRaws 1.3.6.1.4.1.789.1.7.4.13 counter32 read-only
Undocumented
                     cifsNBTDisconnects 1.3.6.1.4.1.789.1.7.4.14 counter32 read-only
Undocumented
                     cifsSMBDisconnects 1.3.6.1.4.1.789.1.7.4.15 counter32 read-only
Undocumented
                     cifsDupDisconnects 1.3.6.1.4.1.789.1.7.4.16 counter32 read-only
Undocumented
                     cifsOpLkBatchToL2s 1.3.6.1.4.1.789.1.7.4.17 counter32 read-only
Undocumented
                     cifsOpLkBatchToNones 1.3.6.1.4.1.789.1.7.4.18 counter32 read-only
Undocumented
                     cifsOpLkL2ToNones 1.3.6.1.4.1.789.1.7.4.19 counter32 read-only
Undocumented
                     cifsOpLkNoBreakAcks 1.3.6.1.4.1.789.1.7.4.20 counter32 read-only
Undocumented
                     cifsOpLkIgnoredAcks 1.3.6.1.4.1.789.1.7.4.21 counter32 read-only
Undocumented
                     cifsOpLkMultiWaiters 1.3.6.1.4.1.789.1.7.4.22 counter32 read-only
Undocumented
                     cifsSharingErrorRetries 1.3.6.1.4.1.789.1.7.4.23 counter32 read-only
Undocumented
                     cifsOpLkWaiterTimedOuts 1.3.6.1.4.1.789.1.7.4.24 counter32 read-only
Undocumented
                     cifsOpLkDelayedBreaks 1.3.6.1.4.1.789.1.7.4.25 counter32 read-only
Undocumented
                     cifsOpLkEarlyNFSs 1.3.6.1.4.1.789.1.7.4.26 counter32 read-only
Undocumented
                     cifsOpLkNFSWaiteds 1.3.6.1.4.1.789.1.7.4.27 counter32 read-only
Undocumented
                     cifsMaxNFSBkWaiterCount 1.3.6.1.4.1.789.1.7.4.28 integer32 read-only
Undocumented
                     cifsClearTextPasswd 1.3.6.1.4.1.789.1.7.4.29 integer read-only
This indicates whether the cifs clients are using clear text passwords when authenticating with the filer. If cifsDomainJoined is false and this variable is also false, then the filer is using NT Security from a local user list. Enumeration: 'yes': 2, 'no': 1.
             netcache 1.3.6.1.4.1.789.1.8
                 ncOptions 1.3.6.1.4.1.789.1.8.1
                     ncIsEnabled 1.3.6.1.4.1.789.1.8.1.1 integer read-only
Whether Netcache is enabled on this system. Enumeration: 'true': 2, 'false': 1.
                     ncIsLicensed 1.3.6.1.4.1.789.1.8.1.2 integer read-only
Whether Netcache is licensed on this system. Enumeration: 'true': 2, 'false': 1.
                     ncDnsOptions 1.3.6.1.4.1.789.1.8.1.3
                         ncDnsIsEnabled 1.3.6.1.4.1.789.1.8.1.3.1 integer read-only
Whether the Domain Name System (DNS) is enabled on this system. Enumeration: 'true': 2, 'false': 1.
                     ncHttpOptions 1.3.6.1.4.1.789.1.8.1.4
                         ncHttpIsEnabled 1.3.6.1.4.1.789.1.8.1.4.1 integer read-only
Whether HTTP is enabled on this system. Enumeration: 'true': 2, 'false': 1.
                     ncNntpOptions 1.3.6.1.4.1.789.1.8.1.5
                         ncNntpIsEnabled 1.3.6.1.4.1.789.1.8.1.5.1 integer read-only
Whether NNTP is enabled on this system. Enumeration: 'true': 2, 'false': 1.
                         ncNntpIsLicensed 1.3.6.1.4.1.789.1.8.1.5.2 integer read-only
Whether NNTP is licensed on this system. Enumeration: 'true': 2, 'false': 1.
                     ncStreamingOptions 1.3.6.1.4.1.789.1.8.1.6
                         ncStreamingMmsIsEnabled 1.3.6.1.4.1.789.1.8.1.6.1 integer read-only
Whether Microsoft Media Services (MMS) is enabled on this system. Enumeration: 'true': 2, 'false': 1.
                         ncStreamingMmsIsLicensed 1.3.6.1.4.1.789.1.8.1.6.2 integer read-only
Whether Microsoft Windows Media Service (MMS) is licensed on this system. Enumeration: 'true': 2, 'false': 1.
                         ncStreamingMmsProIsLicensed 1.3.6.1.4.1.789.1.8.1.6.3 integer read-only
Whether Microsoft Windows Media Service Pro (MMS) is licensed on this system. Enumeration: 'true': 2, 'false': 1.
                         ncStreamingRtspIsEnabled 1.3.6.1.4.1.789.1.8.1.6.4 integer read-only
Whether the Real Time Streaming Protocol (RTSP) is enabled on this system. Enumeration: 'true': 2, 'false': 1.
                         ncStreamingQuickTimeIsLicensed 1.3.6.1.4.1.789.1.8.1.6.5 integer read-only
Whether QuickTime is licensed on this system. Enumeration: 'true': 2, 'false': 1.
                         ncStreamingRealIsLicensed 1.3.6.1.4.1.789.1.8.1.6.6 integer read-only
Whether Real Media streaming is licensed on this system. Enumeration: 'true': 2, 'false': 1.
                         ncStreamingMmsUltraIsLicensed 1.3.6.1.4.1.789.1.8.1.6.7 integer read-only
Whether Microsoft Windows Media Service Ultra (MMS) is licensed on this system. Enumeration: 'true': 2, 'false': 1.
                         ncStreamingRealProIsLicensed 1.3.6.1.4.1.789.1.8.1.6.8 integer read-only
Whether Real Media Pro streaming is licensed on this system. Enumeration: 'true': 2, 'false': 1.
                         ncStreamingRealUltraIsLicensed 1.3.6.1.4.1.789.1.8.1.6.9 integer read-only
Whether Real Media Ultra streaming is licensed on this system. Enumeration: 'true': 2, 'false': 1.
                     ncIcapOptions 1.3.6.1.4.1.789.1.8.1.7
                         ncIcapIsEnabled 1.3.6.1.4.1.789.1.8.1.7.1 integer read-only
Whether ICAP v0.95 is enabled on this system. Enumeration: 'true': 2, 'false': 1.
                         ncIcapIsLicensed 1.3.6.1.4.1.789.1.8.1.7.2 integer read-only
Whether ICAP is licensed on this system. Enumeration: 'true': 2, 'false': 1.
                         ncIcapv1IsEnabled 1.3.6.1.4.1.789.1.8.1.7.3 integer read-only
Whether ICAP v1.0 is enabled on this system. Enumeration: 'true': 2, 'false': 1.
                     ncGrmOptions 1.3.6.1.4.1.789.1.8.1.8
                         ncGrmServerOptions 1.3.6.1.4.1.789.1.8.1.8.1
                             ncGrmServerIsEnabled 1.3.6.1.4.1.789.1.8.1.8.1.1 integer read-only
Whether the Global Request Manager (GRM) Server is enabled on this system. Enumeration: 'true': 2, 'false': 1.
                             ncGrmServerIsLicensed 1.3.6.1.4.1.789.1.8.1.8.1.2 integer read-only
Whether the Global Request Manager (GRM) Server is licensed on this system. Enumeration: 'true': 2, 'false': 1.
                         ncGrmAgentOptions 1.3.6.1.4.1.789.1.8.1.8.2
                             ncGrmAgentIsEnabled 1.3.6.1.4.1.789.1.8.1.8.2.1 integer read-only
Whether the Global Request Manager (GRM) Agent enabled on this system. Enumeration: 'true': 2, 'false': 1.
                             ncGrmAgentIsLicensed 1.3.6.1.4.1.789.1.8.1.8.2.2 integer read-only
Whether the Global Request Manager (GRM) Agent is licensed on this system. Enumeration: 'true': 2, 'false': 1.
                     ncCdOptions 1.3.6.1.4.1.789.1.8.1.9
                         ncCdIsEnabled 1.3.6.1.4.1.789.1.8.1.9.1 integer read-only
Whether Content Director is enabled on this system. Enumeration: 'true': 2, 'false': 1.
                     ncHttpsProxyOptions 1.3.6.1.4.1.789.1.8.1.10
                           ncHttpsProxyIsEnabled 1.3.6.1.4.1.789.1.8.1.10.1 integer read-only
Whether HTTPS is enabled on this system. Enumeration: 'true': 2, 'false': 1.
                           ncHttpsProxyIsLicensed 1.3.6.1.4.1.789.1.8.1.10.2 integer read-only
Whether HTTPS is licensed on this system. Enumeration: 'true': 2, 'false': 1.
                     ncCmsOptions 1.3.6.1.4.1.789.1.8.1.11
                           ncCmsIsEnabled 1.3.6.1.4.1.789.1.8.1.11.1 integer read-only
Whether CMS is enabled on this system. Enumeration: 'true': 2, 'false': 1.
                 ncInfo 1.3.6.1.4.1.789.1.8.2
                     ncVersion 1.3.6.1.4.1.789.1.8.2.1 displaystring read-only
The Netcache version string.
                     ncAdminPort 1.3.6.1.4.1.789.1.8.2.2 integer32 read-only
Netcache Admin Port number - this is the first in the list of admin ports configured for the NetCache.
                     accelmonitor 1.3.6.1.4.1.789.1.8.2.3
                         amNumber 1.3.6.1.4.1.789.1.8.2.3.1 integer32 read-only
The number of entries in the acceleration monitor table.
                         amMonitor 1.3.6.1.4.1.789.1.8.2.3.2 integer read-only
Variable for user defined SNMP traps to monitor whether there has been a status change of any of the acceleration servers that netcache is probing. Enumeration: 'toggleb': 2, 'togglea': 1.
                         amMonitorString 1.3.6.1.4.1.789.1.8.2.3.3 displaystring read-only
Used in conjunction with amMonitor. This returns a string in format of: 'IP:port status' which reports the status of all the servers netcache is accelerating as of last status change.
                         amTable 1.3.6.1.4.1.789.1.8.2.3.4 no-access
A list of acceleration server and port entries. The number of entries is given by the value of amNumber.
                             amEntry 1.3.6.1.4.1.789.1.8.2.3.4.1 no-access
An acceleration monitor entry contains: the server IP address, server port and the status.
                                 amIndex 1.3.6.1.4.1.789.1.8.2.3.4.1.1 integer32 read-only
A unique value for each entry in the acceleration monitor table.
                                 amAddress 1.3.6.1.4.1.789.1.8.2.3.4.1.2 ipaddress read-only
The IP address of the acceleration server the NetCache is monitoring.
                                 amPort 1.3.6.1.4.1.789.1.8.2.3.4.1.3 integer32 read-only
The corresponding port on the server that NetCache is monitoring.
                                 amStatus 1.3.6.1.4.1.789.1.8.2.3.4.1.4 integer read-only
The status of the service running on the server. active - in queue but no probes done yet. up - the server is reachable and responding to probes. down - the server is unreachable. inactive - monitoring is disabled. Enumeration: 'active': 1, 'down': 3, 'inactive': 4, 'up': 2.
                     ncLocalConfigChanged 1.3.6.1.4.1.789.1.8.2.4 integer read-only
Whether the local configuration file on NetCache was changed without using DFM configuration management. Enumeration: 'true': 2, 'false': 1.
                     ncLocalConfigVersion 1.3.6.1.4.1.789.1.8.2.5 integer32 read-only
The current cache configuration's version.
                     grmMonitor 1.3.6.1.4.1.789.1.8.2.6
                         grmMonitorToggle 1.3.6.1.4.1.789.1.8.2.6.1 integer read-only
Variable for user defined SNMP traps to monitor whether there has been a status change of any of the GRM agents reporting to this GRM server. Enumeration: 'toggleb': 2, 'togglea': 1.
                         grmMonitorString 1.3.6.1.4.1.789.1.8.2.6.2 displaystring read-only
Used in conjunction with grmMonitor. This returns a string in format of: 'IP status.' which reports the status of all the GRM agents reporting to this GRM server as of last status change.
                     takeoverinfo 1.3.6.1.4.1.789.1.8.2.7
                         takeoverAddrs 1.3.6.1.4.1.789.1.8.2.7.1 displaystring read-only
Indicates the list of interfaces and their corresponding IP addresses of the partner NetCache that this appliance has taken over.
                         takeoverMode 1.3.6.1.4.1.789.1.8.2.7.2 integer read-only
Indicates the current takeover mode of this appliance. Enumeration: 'takingover': 2, 'giveback': 4, 'takenover': 3, 'normal': 1.
                         takeoverStatus 1.3.6.1.4.1.789.1.8.2.7.3 integer read-only
Indicates the current status of the takeover partner of this appliance. up(1) indicates that the takeover partner is reachable. unknown(2) indicates that an unknown error occured. failed(3) indicates that the partner has failed, takeoverAddrs indicates the partner's IP address this appliance has taken over. Enumeration: 'unknown': 2, 'up': 1, 'failed': 3.
                 ncStats 1.3.6.1.4.1.789.1.8.3
                     ncObjectsStored 1.3.6.1.4.1.789.1.8.3.1 integer32 read-only
The total number of objects stored currently.
                     ncBytesToClients 1.3.6.1.4.1.789.1.8.3.2 counter32 read-only
Total bytes sent to clients
                     ncBytesFromClients 1.3.6.1.4.1.789.1.8.3.3 counter32 read-only
Total bytes received from clients
                     ncBytesToServers 1.3.6.1.4.1.789.1.8.3.4 counter32 read-only
Total bytes sent to servers
                     ncBytesFromServers 1.3.6.1.4.1.789.1.8.3.5 counter32 read-only
Total bytes received from servers
                     ncHttp 1.3.6.1.4.1.789.1.8.3.6
                         ncHttpTotalRequests 1.3.6.1.4.1.789.1.8.3.6.1 counter32 read-only
Total HTTP requests so far
                         ncHttpHitRequests 1.3.6.1.4.1.789.1.8.3.6.2 counter32 read-only
HTTP requests that resulted in hits so far
                         ncHttpMissRequests 1.3.6.1.4.1.789.1.8.3.6.3 counter32 read-only
HTTP requests that resulted in misses so far
                         ncHttpServConns 1.3.6.1.4.1.789.1.8.3.6.4 integer32 read-only
Number of currently open TCP/IP connections to HTTP servers (active and idle)
                         ncHttpCliConns 1.3.6.1.4.1.789.1.8.3.6.5 integer32 read-only
Number of currently open TCP/IP connections to HTTP clients (active and idle)
                         ncHttpBWSavings 1.3.6.1.4.1.789.1.8.3.6.6 integer32 read-only
Bandwidth savings for HTTP requests
                         ncHttpObjHitrate 1.3.6.1.4.1.789.1.8.3.6.7 integer32 read-only
Object Hitrate HTTP requests
                         ncHttpRespTimePerByte 1.3.6.1.4.1.789.1.8.3.6.8 integer32 read-only
Response time in milliseconds per byte for HTTP requests.
                         ncHttpAvgRespTime 1.3.6.1.4.1.789.1.8.3.6.9 integer32 read-only
Average response time in milliseconds for all HTTP requests.
                         ncHttpAvgHitRespTime 1.3.6.1.4.1.789.1.8.3.6.10 integer32 read-only
Average response time in milliseconds for HTTP hit requests.
                         ncHttpAvgMissRespTime 1.3.6.1.4.1.789.1.8.3.6.11 integer32 read-only
Average response time in milliseconds for HTTP miss requests.
                         ncHttpInstAvgRespTime 1.3.6.1.4.1.789.1.8.3.6.12 integer32 read-only
Average response time in milliseconds for all HTTP requests during the last 60 seconds.
                         ncHttpInstAvgHitRespTime 1.3.6.1.4.1.789.1.8.3.6.13 integer32 read-only
Average response time in milliseconds for HTTP hit requests during the last 60 seconds.
                         ncHttpInstAvgMissRespTime 1.3.6.1.4.1.789.1.8.3.6.14 integer32 read-only
Average response time in milliseconds for HTTP miss requests during the last 60 seconds.
                         ncHttpTotalRespTime 1.3.6.1.4.1.789.1.8.3.6.15 integer32 read-only
Total fetch time in milliseconds for HTTP requests
                         ncHttpTotalHitRespTime 1.3.6.1.4.1.789.1.8.3.6.16 integer32 read-only
Total fetch time in milliseconds for HTTP HIT requests
                         ncHttpTotalMissRespTime 1.3.6.1.4.1.789.1.8.3.6.17 integer32 read-only
Total fetch time in milliseconds for HTTP MISS requests
                         ncHttpBytesToClients 1.3.6.1.4.1.789.1.8.3.6.18 counter32 read-only
Total HTTP bytes sent to clients
                         ncHttpBytesFromClients 1.3.6.1.4.1.789.1.8.3.6.19 counter32 read-only
Total HTTP bytes received from clients
                         ncHttpBytesToServers 1.3.6.1.4.1.789.1.8.3.6.20 counter32 read-only
Total HTTP bytes sent to servers
                         ncHttpBytesFromServers 1.3.6.1.4.1.789.1.8.3.6.21 counter32 read-only
Total HTTP bytes received from servers
                         ncHttpHighTotalRespTimes 1.3.6.1.4.1.789.1.8.3.6.22 counter32 read-only
Total fetch time in milliseconds for HTTP requests. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                         ncHttpLowTotalRespTimes 1.3.6.1.4.1.789.1.8.3.6.23 counter32 read-only
Total fetch time in milliseconds for HTTP requests. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                         ncHttpHighTotalHitRespTimes 1.3.6.1.4.1.789.1.8.3.6.24 counter32 read-only
Total fetch time in milliseconds for HTTP HIT requests. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                         ncHttpLowTotalHitRespTimes 1.3.6.1.4.1.789.1.8.3.6.25 counter32 read-only
Total fetch time in milliseconds for HTTP HIT requests. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                         ncHttpHighTotalMissRespTimes 1.3.6.1.4.1.789.1.8.3.6.26 counter32 read-only
Total fetch time in milliseconds for HTTP MISS requests. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                         ncHttpLowTotalMissRespTimes 1.3.6.1.4.1.789.1.8.3.6.27 counter32 read-only
Total fetch time in milliseconds for HTTP MISS requests. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                         ncHttpReqRate 1.3.6.1.4.1.789.1.8.3.6.28 integer32 read-only
Request Rate for HTTP requests
                         ncHttpObjHitRateLast1Min 1.3.6.1.4.1.789.1.8.3.6.29 integer32 read-only
HTTP object hit rate in the last 1 minute.
                         ncHttpObjHitRateLast5Min 1.3.6.1.4.1.789.1.8.3.6.30 integer32 read-only
HTTP object hit rate in the last 5 minutes.
                         ncHttpByteHitRateLast1Min 1.3.6.1.4.1.789.1.8.3.6.31 integer32 read-only
HTTP byte hit rate in the last 1 minute.
                         ncHttpByteHitRateLast5Min 1.3.6.1.4.1.789.1.8.3.6.32 integer32 read-only
HTTP byte hit rate in the last 5 minutes.
                         ncHttpBWSavingsLast1Min 1.3.6.1.4.1.789.1.8.3.6.33 integer32 read-only
Bandwidth savings for HTTP requests in the last 1 minute
                         ncHttpBWSavingsLast5Min 1.3.6.1.4.1.789.1.8.3.6.34 integer32 read-only
Bandwidth savings for HTTP requests in the last 5 minutes
                         ncHttpActiveServConns 1.3.6.1.4.1.789.1.8.3.6.35 integer32 read-only
Number of currently active TCP/IP connections to HTTP servers
                         ncHttpActiveCliConns 1.3.6.1.4.1.789.1.8.3.6.36 integer32 read-only
Number of currently active TCP/IP connections to HTTP clients
                         ncHttpAccelTable 1.3.6.1.4.1.789.1.8.3.6.37 no-access
Number of kilobytes sent to and recieved from the client side per acceleration rule
                               ncHttpAccelEntry 1.3.6.1.4.1.789.1.8.3.6.37.1 no-access
Each entry contains the number of kilobytes sent and received to/from the clients side per acceleration rule
                                   ncHttpAccelIndex 1.3.6.1.4.1.789.1.8.3.6.37.1.1 integer32 read-only
A unique value for each entry in the http acceleration stats table
                                   ncHttpAccelKbytesFromClient 1.3.6.1.4.1.789.1.8.3.6.37.1.2 counter32 read-only
The total number of kilobytes received from the client for this acceleration rule
                                   ncHttpAccelKbytesToClient 1.3.6.1.4.1.789.1.8.3.6.37.1.3 counter32 read-only
The total number of kilobytes sent to the client for this acceleration rule
                                   ncHttpAccelHits 1.3.6.1.4.1.789.1.8.3.6.37.1.4 counter32 read-only
The number of times this acceleration rule has been hit
                         ncHttpsAccelTable 1.3.6.1.4.1.789.1.8.3.6.38 no-access
Number of kilobytes sent to and recieved from the client side per acceleration rule
                               ncHttpsAccelEntry 1.3.6.1.4.1.789.1.8.3.6.38.1 no-access
Each entry contains the number of kilobytes sent and received to/from the clients side per acceleration rule
                                   ncHttpsAccelIndex 1.3.6.1.4.1.789.1.8.3.6.38.1.1 integer32 read-only
A unique value for each entry in the http acceleration stats table
                                   ncHttpsAccelKbytesFromClient 1.3.6.1.4.1.789.1.8.3.6.38.1.2 counter32 read-only
The total number of kilobytes received from the client for this acceleration rule
                                   ncHttpsAccelKbytesToClient 1.3.6.1.4.1.789.1.8.3.6.38.1.3 counter32 read-only
The total number of kilobytes sent to the client for this acceleration rule
                                   ncHttpsAccelHits 1.3.6.1.4.1.789.1.8.3.6.38.1.4 counter32 read-only
The number of times this acceleration rule has been hit
                     ncNntp 1.3.6.1.4.1.789.1.8.3.7
                         ncNntpTotalRequests 1.3.6.1.4.1.789.1.8.3.7.1 counter32 read-only
NNTP total requests so far
                         ncNntpCacheableRequests 1.3.6.1.4.1.789.1.8.3.7.2 counter32 read-only
NNTP requests that were cacheable
                         ncNntpProxyRequests 1.3.6.1.4.1.789.1.8.3.7.3 counter32 read-only
NNTP requests that were non-cacheable
                         ncNntpServConns 1.3.6.1.4.1.789.1.8.3.7.4 integer32 read-only
Number of currently open TCP/IP connections to NNTP servers (active and idle)
                         ncNntpCliConns 1.3.6.1.4.1.789.1.8.3.7.5 integer32 read-only
Number of currently open TCP/IP connections to NNTP clients (active and idle)
                         ncNntpBWSavings 1.3.6.1.4.1.789.1.8.3.7.6 integer32 read-only
Bandwidth savings for NNTP requests
                         ncNntpRespTimePerByte 1.3.6.1.4.1.789.1.8.3.7.7 integer32 read-only
Response time per byte for NNTP requests
                         ncNntpBytesToClients 1.3.6.1.4.1.789.1.8.3.7.8 counter32 read-only
Total NNTP bytes sent to clients
                         ncNntpBytesFromClients 1.3.6.1.4.1.789.1.8.3.7.9 counter32 read-only
Total NNTP bytes received from clients
                         ncNntpBytesToServers 1.3.6.1.4.1.789.1.8.3.7.10 counter32 read-only
Total NNTP bytes sent to servers
                         ncNntpBytesFromServers 1.3.6.1.4.1.789.1.8.3.7.11 counter32 read-only
Total NNTP bytes received from servers
                         ncNntpObjHitrate 1.3.6.1.4.1.789.1.8.3.7.12 integer32 read-only
Object Hitrate of NNTP requests
                         ncNntpActiveServConns 1.3.6.1.4.1.789.1.8.3.7.13 integer32 read-only
Number of currently active TCP/IP connections to NNTP servers
                         ncNntpActiveCliConns 1.3.6.1.4.1.789.1.8.3.7.14 integer32 read-only
Number of currently active TCP/IP connections to NNTP clients
                     ncFtp 1.3.6.1.4.1.789.1.8.3.8
                         ncFtpTotalRequests 1.3.6.1.4.1.789.1.8.3.8.1 counter32 read-only
FTP total requests so far
                         ncFtpHitRequests 1.3.6.1.4.1.789.1.8.3.8.2 counter32 read-only
FTP requests that resulted in hits so far
                         ncFtpMissRequests 1.3.6.1.4.1.789.1.8.3.8.3 counter32 read-only
FTP requests that resulted in misses so far
                         ncFtpServConns 1.3.6.1.4.1.789.1.8.3.8.4 integer32 read-only
Number of currently open TCP/IP connections to FTP servers (active and idle)
                         ncFtpCliConns 1.3.6.1.4.1.789.1.8.3.8.5 integer32 read-only
Number of currently open TCP/IP connections to FTP clients (active and idle)
                         ncFtpBWSavings 1.3.6.1.4.1.789.1.8.3.8.6 integer32 read-only
Bandwidth savings for FTP requests
                         ncFtpRespTimePerByte 1.3.6.1.4.1.789.1.8.3.8.7 integer32 read-only
Response time per byte for FTP requests
                         ncFtpBytesToClients 1.3.6.1.4.1.789.1.8.3.8.8 counter32 read-only
Total FTP bytes sent to clients
                         ncFtpBytesFromClients 1.3.6.1.4.1.789.1.8.3.8.9 counter32 read-only
Total FTP bytes received from clients
                         ncFtpBytesToServers 1.3.6.1.4.1.789.1.8.3.8.10 counter32 read-only
Total FTP bytes sent to servers
                         ncFtpBytesFromServers 1.3.6.1.4.1.789.1.8.3.8.11 counter32 read-only
Total FTP bytes received from servers
                         ncFtpObjHitrate 1.3.6.1.4.1.789.1.8.3.8.12 integer32 read-only
Object Hitrate of FTP requests
                         ncFtpActiveServConns 1.3.6.1.4.1.789.1.8.3.8.13 integer32 read-only
Number of currently active TCP/IP connections to FTP servers
                         ncFtpActiveCliConns 1.3.6.1.4.1.789.1.8.3.8.14 integer32 read-only
Number of currently active TCP/IP connections to FTP clients
                     ncStreaming 1.3.6.1.4.1.789.1.8.3.9
                         ncStreamingServConns 1.3.6.1.4.1.789.1.8.3.9.1 integer32 read-only
Number of currently open TCP/IP connections to streaming servers (active and idle)
                         ncStreamingCliConns 1.3.6.1.4.1.789.1.8.3.9.2 integer32 read-only
Number of currently open TCP/IP connections to streaming clients (active and idle)
                         ncStreamingBWSavings 1.3.6.1.4.1.789.1.8.3.9.3 integer32 read-only
Bandwidth savings for all streaming requests
                         ncStreamingRespTimePerByte 1.3.6.1.4.1.789.1.8.3.9.4 integer32 read-only
Response time per byte for all streaming requests
                         ncStreamingHitRequests 1.3.6.1.4.1.789.1.8.3.9.5 counter32 read-only
STREAMING requests that resulted in hits so far
                         ncStreamingMissRequests 1.3.6.1.4.1.789.1.8.3.9.6 counter32 read-only
STREAMING requests that resulted in misses so far
                         ncStreamingTotalRequests 1.3.6.1.4.1.789.1.8.3.9.7 counter32 read-only
STREAMING total requests so far
                         ncStreamingLiveBytesToClients 1.3.6.1.4.1.789.1.8.3.9.8 counter32 read-only
Total Streaming Live bytes sent to clients
                         ncStreamingLiveBytesFromClients 1.3.6.1.4.1.789.1.8.3.9.9 counter32 read-only
Total Streaming Live bytes received from clients
                         ncStreamingLiveBytesToServers 1.3.6.1.4.1.789.1.8.3.9.10 counter32 read-only
Total Streaming Live bytes sent to servers
                         ncStreamingLiveBytesFromServers 1.3.6.1.4.1.789.1.8.3.9.11 counter32 read-only
Total Streaming Live bytes received from servers
                         ncStreamingProxyBytesToClients 1.3.6.1.4.1.789.1.8.3.9.12 counter32 read-only
Total Streaming Proxy bytes sent to clients
                         ncStreamingProxyBytesFromClients 1.3.6.1.4.1.789.1.8.3.9.13 counter32 read-only
Total Streaming Proxy bytes received from clients
                         ncStreamingProxyBytesToServers 1.3.6.1.4.1.789.1.8.3.9.14 counter32 read-only
Total Streaming Proxy bytes sent to servers
                         ncStreamingProxyBytesFromServers 1.3.6.1.4.1.789.1.8.3.9.15 counter32 read-only
Total Streaming Proxy bytes received from servers
                         ncStreamingOBTClients 1.3.6.1.4.1.789.1.8.3.9.16 counter32 read-only
Total Streaming Ondemand bytes sent to clients
                         ncStreamingOBFClients 1.3.6.1.4.1.789.1.8.3.9.17 counter32 read-only
Total Streaming Ondemand bytes received from clients
                         ncStreamingOBTServers 1.3.6.1.4.1.789.1.8.3.9.18 counter32 read-only
Total Streaming Ondemand bytes sent to servers
                         ncStreamingOBFServers 1.3.6.1.4.1.789.1.8.3.9.19 counter32 read-only
Total Streaming Ondemand bytes received from servers
                         ncStreamingObjHitrate 1.3.6.1.4.1.789.1.8.3.9.20 integer32 read-only
Object Hitrate of Streaming requests
                         ncStreamingRealBytesToClients 1.3.6.1.4.1.789.1.8.3.9.21 counter32 read-only
Total Streaming Real bytes sent to clients
                         ncStreamingRealBytesFromClients 1.3.6.1.4.1.789.1.8.3.9.22 counter32 read-only
Total Streaming Real bytes received from clients
                         ncStreamingRealBytesToServers 1.3.6.1.4.1.789.1.8.3.9.23 counter32 read-only
Total Streaming Real bytes sent to servers
                         ncStreamingRealBytesFromServers 1.3.6.1.4.1.789.1.8.3.9.24 counter32 read-only
Total Streaming Real bytes received from servers
                         ncStreamingMmsBytesToClients 1.3.6.1.4.1.789.1.8.3.9.25 counter32 read-only
Total Streaming Mms bytes sent to clients
                         ncStreamingMmsBytesFromClients 1.3.6.1.4.1.789.1.8.3.9.26 counter32 read-only
Total Streaming Mms bytes received from clients
                         ncStreamingMmsBytesToServers 1.3.6.1.4.1.789.1.8.3.9.27 counter32 read-only
Total Streaming Mms bytes sent to servers
                         ncStreamingMmsBytesFromServers 1.3.6.1.4.1.789.1.8.3.9.28 counter32 read-only
Total Streaming Mms bytes received from servers
                         ncStreamingQTBTClients 1.3.6.1.4.1.789.1.8.3.9.29 counter32 read-only
Total Streaming QuickTime bytes sent to clients
                         ncStreamingQTBFClients 1.3.6.1.4.1.789.1.8.3.9.30 counter32 read-only
Total Streaming QuickTime bytes received from clients
                         ncStreamingQTBTServers 1.3.6.1.4.1.789.1.8.3.9.31 counter32 read-only
Total Streaming QuickTime bytes sent to servers
                         ncStreamingQTBFServers 1.3.6.1.4.1.789.1.8.3.9.32 counter32 read-only
Total Streaming QuickTime bytes received from servers
                         ncStreamingLiveBWSavings 1.3.6.1.4.1.789.1.8.3.9.33 integer32 read-only
Bandwidth savings for all Live streaming requests
                         ncStreamingOndemandBWSavings 1.3.6.1.4.1.789.1.8.3.9.34 integer32 read-only
Bandwidth savings for all VOD streaming requests
                         ncStreamingRealBWSavings 1.3.6.1.4.1.789.1.8.3.9.35 integer32 read-only
Bandwidth savings for all Real streaming requests
                         ncStreamingMmsBWSavings 1.3.6.1.4.1.789.1.8.3.9.36 integer32 read-only
Bandwidth savings for all MMS streaming requests
                         ncStreamingQuickTimeBWSavings 1.3.6.1.4.1.789.1.8.3.9.37 integer32 read-only
Bandwidth savings for all QuickTime streaming requests
                         ncStreamingActiveServConns 1.3.6.1.4.1.789.1.8.3.9.38 integer32 read-only
Number of currently active TCP/IP connections to streaming servers
                         ncStreamingActiveCliConns 1.3.6.1.4.1.789.1.8.3.9.39 integer32 read-only
Number of currently active TCP/IP connections to streaming clients
                         ncStreamingRtspWMBytesToClients 1.3.6.1.4.1.789.1.8.3.9.40 counter32 read-only
Total Streaming Windows Media RTSP bytes sent to clients
                         ncStreamingRtspWMBFClients 1.3.6.1.4.1.789.1.8.3.9.41 counter32 read-only
Total Streaming Windows Media RTSP bytes received from clients
                         ncStreamingRtspWMBytesToServers 1.3.6.1.4.1.789.1.8.3.9.42 counter32 read-only
Total Streaming Windows Media RTSP bytes sent to servers
                         ncStreamingRtspWMBFServers 1.3.6.1.4.1.789.1.8.3.9.43 counter32 read-only
Total Streaming Windows Media RTSP bytes received from servers
                         ncStreamingRtspWMBWSavings 1.3.6.1.4.1.789.1.8.3.9.44 integer32 read-only
Bandwidth savings for all Windows Media RTSP streaming requests
                         ncStreamingAccelTable 1.3.6.1.4.1.789.1.8.3.9.45 no-access
Number of kilobytes sent to and recieved from the client side per acceleration rule
                               ncStreamingAccelEntry 1.3.6.1.4.1.789.1.8.3.9.45.1 no-access
Each entry contains the number of kilobytes sent and received to/from the clients side per acceleration rule
                                   ncStreamingAccelIndex 1.3.6.1.4.1.789.1.8.3.9.45.1.1 integer32 read-only
A unique value for each entry in the streaming acceleration stats table
                                   ncStreamingAccelKbytesFromClient 1.3.6.1.4.1.789.1.8.3.9.45.1.2 counter32 read-only
The total number of kilobytes received from the client for this acceleration rule
                                   ncStreamingAccelKbytesToClient 1.3.6.1.4.1.789.1.8.3.9.45.1.3 counter32 read-only
The total number of kilobytes sent to the client for this acceleration rule
                                   ncStreamingAccelHits 1.3.6.1.4.1.789.1.8.3.9.45.1.4 counter32 read-only
The number of times this acceleration rule has been hit
                         ncStreamingClientsDelayedSW 1.3.6.1.4.1.789.1.8.3.9.46 counter32 read-only
Number of clients delayed because of a Bandwidth Limit
                     ncTotalBWSavings 1.3.6.1.4.1.789.1.8.3.10 integer32 read-only
Total Bandwidth savings for HTTP, FTP, NNTP, and Streaming protocols
                     ncDns 1.3.6.1.4.1.789.1.8.3.11
                           ncDnsRequestsReceived 1.3.6.1.4.1.789.1.8.3.11.1 counter32 read-only
Total DNS requests received from clients
                           ncDnsCacheHits 1.3.6.1.4.1.789.1.8.3.11.2 counter32 read-only
Hits on the DNS cache. This includes hits for DNS lookups generated by NetCache internally
                           ncDnsCacheMisses 1.3.6.1.4.1.789.1.8.3.11.3 counter32 read-only
Misses on the DNS cache. This includes misses for DNS lookups generated by NetCache internally
                           ncDnsSuccessfulForwardLookups 1.3.6.1.4.1.789.1.8.3.11.4 counter32 read-only
Forward DNS lookups that are successful
                           ncDnsFailedForwardLookups 1.3.6.1.4.1.789.1.8.3.11.5 counter32 read-only
Forward DNS lookups that failed
                           ncDnsPendingForwardLookups 1.3.6.1.4.1.789.1.8.3.11.6 integer32 read-only
Forward DNS lookups that are in progress
                           ncDnsSuccessfulReverseLookups 1.3.6.1.4.1.789.1.8.3.11.7 counter32 read-only
Reverse DNS lookups that are successful
                           ncDnsFailedReverseLookups 1.3.6.1.4.1.789.1.8.3.11.8 counter32 read-only
Reverse DNS lookups that failed
                           ncDnsPendingReverseLookups 1.3.6.1.4.1.789.1.8.3.11.9 integer32 read-only
Reverse DNS lookups that are in progress
                           ncDnsIres 1.3.6.1.4.1.789.1.8.3.11.10
                                 ncDnsIresIsEnabled 1.3.6.1.4.1.789.1.8.3.11.10.1 integer read-only
Has Full Service Resolver been enabled Enumeration: 'true': 2, 'false': 1.
                                 ncDnsIresIsInitialised 1.3.6.1.4.1.789.1.8.3.11.10.2 integer read-only
Has Full Service Resolver initalised Enumeration: 'true': 2, 'false': 1.
                                 ncDnsIresForwardLookups 1.3.6.1.4.1.789.1.8.3.11.10.3 counter32 read-only
Full Service Resolver's Forward Lookups
                                 ncDnsIresPendingForwardLookups 1.3.6.1.4.1.789.1.8.3.11.10.4 counter32 read-only
Full Service Resolver's Pending Forward Lookups
                                 ncDnsIresReverseLookups 1.3.6.1.4.1.789.1.8.3.11.10.5 counter32 read-only
Full Service Resolver's Reverse Lookups
                                 ncDnsIresPendingReverseLookups 1.3.6.1.4.1.789.1.8.3.11.10.6 counter32 read-only
Full Service Resolver's Pending Reverse Lookups
                     ncAuth 1.3.6.1.4.1.789.1.8.3.12
                           ncNtlm 1.3.6.1.4.1.789.1.8.3.12.1
                               ncNtlmPossibleProblem 1.3.6.1.4.1.789.1.8.3.12.1.1 integer read-only
Whether a possible ntlm problem is detected in the appliance's domain environment. Enumeration: 'true': 2, 'false': 1.
                     ncRM 1.3.6.1.4.1.789.1.8.3.13
                           ncRMMem 1.3.6.1.4.1.789.1.8.3.13.1
                               ncRMMemTotal 1.3.6.1.4.1.789.1.8.3.13.1.1 integer32 read-only
Total memory in kilobytes available for allocations after boot. It does not imply the total system memory.
                               ncRMMemFree 1.3.6.1.4.1.789.1.8.3.13.1.2 integer32 read-only
Current free memory in kilobytes available for allocations.
             snapmirror 1.3.6.1.4.1.789.1.9
                 snapmirrorOn 1.3.6.1.4.1.789.1.9.1 integer read-only
Indicates whether snapmirror has been turned on or not. Enumeration: 'on': 2, 'off': 1.
                 snapmirrorActiveRestoreCount 1.3.6.1.4.1.789.1.9.2 integer32 read-only
Number of active SnapMirror restores.
                 snapmirrorScheduledRestoreCount 1.3.6.1.4.1.789.1.9.3 integer32 read-only
Number of scheduled SnapMirror restores.
                 snapmirrorBackupNumber 1.3.6.1.4.1.789.1.9.4 integer32 read-only
Number of active SnapMirror backups.
                 snapmirrorBackupSuccesses 1.3.6.1.4.1.789.1.9.5 counter32 read-only
Number of SnapMirror backups which completed. Reset on reboot.
                 snapmirrorRestoreSuccesses 1.3.6.1.4.1.789.1.9.6 counter32 read-only
Number of SnapMirror restores which completed. Reset on reboot.
                 snapmirrorBackupAborts 1.3.6.1.4.1.789.1.9.7 counter32 read-only
Number of SnapMirror backup transfers which have aborted. Reset on reboot.
                 snapmirrorRestoreRestartAborts 1.3.6.1.4.1.789.1.9.8 counter32 read-only
Number of SnapMirror restore temporary aborts. Reset on reboot.
                 snapmirrorRestoreWaitAborts 1.3.6.1.4.1.789.1.9.9 counter32 read-only
Number of SnapMirror restore permanent aborts. Reset on reboot.
                 snapmirrorWrittenBytes 1.3.6.1.4.1.789.1.9.10 counter32 read-only
Number of Megabytes written by SnapMirror. Reset on reboot.
                 snapmirrorReadBytes 1.3.6.1.4.1.789.1.9.11 counter32 read-only
Number of Megabytes read by SnapMirror. Reset on reboot.
                 snapmirrorActiveDstNumber 1.3.6.1.4.1.789.1.9.12 integer32 read-only
Number of active SnapMirror destination.
                 snapmirrorActiveSrcNumber 1.3.6.1.4.1.789.1.9.13 integer32 read-only
Number of active SnapMirror Source.
                 snapmirrorFilerTotalDstSuccesses 1.3.6.1.4.1.789.1.9.14 counter32 read-only
Total number of successful snapmirror transfers to the destination. Persistent across reboot.
                 snapmirrorFilerTotalSrcSuccesses 1.3.6.1.4.1.789.1.9.15 counter32 read-only
Total number of successful snapmirror transfers from the source. Persistent across reboot.
                 snapmirrorFilerTotalSrcFailures 1.3.6.1.4.1.789.1.9.16 counter32 read-only
Total number of failed SnapMirror transfers on the source. Persistent across reboot.
                 snapmirrorFilerTotalDstFailures 1.3.6.1.4.1.789.1.9.17 counter32 read-only
Total number of failed SnapMirror transfers on the destination. Persistent across reboot.
                 snapmirrorFilerTotalDstDeferments 1.3.6.1.4.1.789.1.9.18 counter32 read-only
Total number of deferred snapmirror transfer on the destination. Persistent across reboot.
                 snapmirrorIsLicensed 1.3.6.1.4.1.789.1.9.19 integer read-only
Whether the snapmirror is licensed on the filer. Enumeration: 'true': 2, 'false': 1.
                 snapmirrorStatusTable 1.3.6.1.4.1.789.1.9.20 no-access
provide a list of snapmirror status.
                       snapmirrorStatusEntry 1.3.6.1.4.1.789.1.9.20.1 no-access
Provide a report of current status of snapmirror.
                           snapmirrorIndex 1.3.6.1.4.1.789.1.9.20.1.1 integer32 read-only
Index into the snapmirror status table.
                           snapmirrorSrc 1.3.6.1.4.1.789.1.9.20.1.2 octet string read-only
Source of the snapmirror. : or :/vol/
                           snapmirrorDst 1.3.6.1.4.1.789.1.9.20.1.3 octet string read-only
Destination of the snapmirror. : or :/vol/
                           snapmirrorStatus 1.3.6.1.4.1.789.1.9.20.1.4 integer read-only
Current transfer status of the snapmirror. Enumeration: 'aborting': 4, 'quiescing': 6, 'syncing': 9, 'transferring': 2, 'waiting': 8, 'inSync': 10, 'idle': 1, 'resyncing': 7, 'migrating': 5, 'pending': 3.
                           snapmirrorState 1.3.6.1.4.1.789.1.9.20.1.5 integer read-only
Current state of the snapmirror. Enumeration: 'uninitialized': 1, 'quiesced': 4, 'brokenOff': 3, 'unknown': 6, 'source': 5, 'snapmirrored': 2.
                           snapmirrorLag 1.3.6.1.4.1.789.1.9.20.1.6 timeticks read-only
How far behind from the source the destination is.
                           snapmirrorTotalSuccesses 1.3.6.1.4.1.789.1.9.20.1.7 counter32 read-only
Total number of successful transfer since the snapmirror is initialized. Persistent across reboot.
                           snapmirrorTotalRestartSuccesses 1.3.6.1.4.1.789.1.9.20.1.8 counter32 read-only
Total number of successful restarted transfer since the snapmirror is initialized. Persistent across reboot.
                           snapmirrorTotalFailures 1.3.6.1.4.1.789.1.9.20.1.9 counter32 read-only
Total number of failed or aborted transfer since the snapmirror is initialized. Persistent across reboot.
                           snapmirrorTotalDeferments 1.3.6.1.4.1.789.1.9.20.1.10 counter32 read-only
Total number of deferment since the snapmirror is initialized. Persistent across reboot.
                           snapmirrorTotalTransMBs 1.3.6.1.4.1.789.1.9.20.1.11 counter32 read-only
Total transfer size in MB for the snapmirror. Reset on reboot.
                           snapmirrorTotalTransTimeSeconds 1.3.6.1.4.1.789.1.9.20.1.12 counter32 read-only
Total number of seconds spent in successful transfer for the snapmirror. Reset on reboot.
                           snapmirrorThrottleValue 1.3.6.1.4.1.789.1.9.20.1.13 integer32 read-only
Current throttle value for the snapmirror.
                           snapmirrorMirrorTimestamp 1.3.6.1.4.1.789.1.9.20.1.14 displaystring read-only
Timestamp of the last snapshot successfully transferred from the source to the destination.
                           snapmirrorBaseSnapshot 1.3.6.1.4.1.789.1.9.20.1.15 displaystring read-only
The name of the current base snapshot for the snapmirror.
                           snapmirrorLastTransType 1.3.6.1.4.1.789.1.9.20.1.16 displaystring read-only
The type of the previous successful transfer.
                           snapmirrorLastTransMBs 1.3.6.1.4.1.789.1.9.20.1.17 counter32 read-only
Last successful transfer size in MB for the snapmirror.
                           snapmirrorLastTransTimeSeconds 1.3.6.1.4.1.789.1.9.20.1.18 counter32 read-only
Duration of last successful transfer in seconds for the snapmirror.
                           snapmirrorSchedule 1.3.6.1.4.1.789.1.9.20.1.19 displaystring read-only
Update schedule for the snapmirror in conf file format.
                           snapmirrorScheduleDesc 1.3.6.1.4.1.789.1.9.20.1.20 displaystring read-only
Description of the update schedule for the snapmirror.
                           snapmirrorArguments 1.3.6.1.4.1.789.1.9.20.1.21 displaystring read-only
Arguments for the snapmirror in conf file format.
                           snapmirrorSyncToAsync 1.3.6.1.4.1.789.1.9.20.1.22 counter32 read-only
The number of times changing from sync mode to async mode since the snapmirror is initialized. Persistent across reboot.
                 snapmirrorConnTable 1.3.6.1.4.1.789.1.9.21 no-access
Provide a list of snapmirror connection definitions.
                       snapmirrorConnEntry 1.3.6.1.4.1.789.1.9.21.1 no-access
Provide a report of a defined multipath connection.
                           snapmirrorConnIndex 1.3.6.1.4.1.789.1.9.21.1.1 integer32 read-only
Index into the snapmirror multipath connection table.
                           snapmirrorConnName 1.3.6.1.4.1.789.1.9.21.1.2 displaystring read-only
The name of the snapmirror multipath connection.
                           snapmirrorConnType 1.3.6.1.4.1.789.1.9.21.1.3 integer read-only
The type of the snapmirror multipath connection. Enumeration: 'multi': 1, 'failover': 2.
                           snapmirrorConnSrc1 1.3.6.1.4.1.789.1.9.21.1.4 displaystring read-only
The name of the source for the first path.
                           snapmirrorConnDst1 1.3.6.1.4.1.789.1.9.21.1.5 displaystring read-only
The name of the destination for the first path.
                           snapmirrorConnSrc2 1.3.6.1.4.1.789.1.9.21.1.6 displaystring read-only
The name of the source for the second path.
                           snapmirrorConnDst2 1.3.6.1.4.1.789.1.9.21.1.7 displaystring read-only
The name of the destination for the second path.
             ndmp 1.3.6.1.4.1.789.1.10
                   ndmpOn 1.3.6.1.4.1.789.1.10.1 integer read-only
Indicates whether ndmpd has been turned on or not. Enumeration: 'on': 2, 'off': 1.
                   ndmpSessionOpened 1.3.6.1.4.1.789.1.10.2 integer32 read-only
Total number of ndmpd sessions currently opened. Sessions may be running backups, restores or neither.
                   ndmpBackupActive 1.3.6.1.4.1.789.1.10.3 integer32 read-only
Number of ndmpd backups currently active.
                   ndmpRestoreActive 1.3.6.1.4.1.789.1.10.4 integer32 read-only
Number of ndmpd restores currently active.
                   ndmpTapeActive 1.3.6.1.4.1.789.1.10.5 integer32 read-only
Number of tape drives currently active.
                   ndmpBackupSuccesses 1.3.6.1.4.1.789.1.10.6 counter32 read-only
Number of ndmpd backups that succeeded.
                   ndmpRestoreSuccesses 1.3.6.1.4.1.789.1.10.7 counter32 read-only
Number of ndmpd restores that succeeded.
                   ndmpBackupFailures 1.3.6.1.4.1.789.1.10.8 counter32 read-only
Number of ndmpd backups that failed.
                   ndmpRestoreFailures 1.3.6.1.4.1.789.1.10.9 counter32 read-only
Number of ndmpd restores that failed.
                   ndmpBackupFailureReason 1.3.6.1.4.1.789.1.10.10 displaystring read-only
When the ndmpBackupFailures value is non-zero, this string describes the reason for the most recent backup failure.
                   ndmpRestoreFailureReason 1.3.6.1.4.1.789.1.10.11 displaystring read-only
When the ndmpRestoreFailures value is non-zero, this string describes the reason for the most recent restore failure.
             fabric 1.3.6.1.4.1.789.1.11
                   fabricInstances 1.3.6.1.4.1.789.1.11.1 integer32 read-only
The number of distinct fabrics present.
                   fabricTable 1.3.6.1.4.1.789.1.11.2 no-access
Provide a list of fabrics.
                       fabricEntry 1.3.6.1.4.1.789.1.11.2.1 no-access
Provide a report of current configuration and status of fabrics.
                           fabricIndex 1.3.6.1.4.1.789.1.11.2.1.1 integer32 read-only
A number that identifies this fabric entry.
                           fabricStatus 1.3.6.1.4.1.789.1.11.2.1.2 integer read-only
This indicates the overall status of the SAN fabric(s). Enumeration: 'unknown': 3, 'faulty': 2, 'ok': 1.
                           fabricStatusMessage 1.3.6.1.4.1.789.1.11.2.1.3 displaystring read-only
A string describing the fabric status, including a description of the condition (if any) that caused the status to be anything other than ok(3).
                           fabricName 1.3.6.1.4.1.789.1.11.2.1.4 octet string read-only
This is the WWN of the fabric.
                           fabricOwner 1.3.6.1.4.1.789.1.11.2.1.5 integer read-only
This indicates who owns the management of the fabric. Enumeration: 'unknown': 3, 'other': 2, 'netapp': 1.
                   switchTable 1.3.6.1.4.1.789.1.11.3 no-access
Provide a list of switches and hubs connected to the fabric.
                       switchEntry 1.3.6.1.4.1.789.1.11.3.1 no-access
Provide a report of current configuration and status of fabric interconnect elements. This include switches and hubs.
                           switchIndex 1.3.6.1.4.1.789.1.11.3.1.1 integer32 read-only
A number that identifies this switch entry.
                           switchName 1.3.6.1.4.1.789.1.11.3.1.2 octet string read-only
This is the WWN of the switch.
                           switchSymbolicName 1.3.6.1.4.1.789.1.11.3.1.3 octet string read-only
This is the symbolic name of the switch.
                           switchType 1.3.6.1.4.1.789.1.11.3.1.4 integer read-only
The type of the switch. Enumeration: 'unknown': 3, 'switch': 2, 'hub': 1.
                           switchDomain 1.3.6.1.4.1.789.1.11.3.1.5 integer32 read-only
The domain identifier of the switch.
                           switchManagementId 1.3.6.1.4.1.789.1.11.3.1.6 integer32 read-only
The in-band management identifier of the switch.
                           switchStatus 1.3.6.1.4.1.789.1.11.3.1.7 integer read-only
The current status of the switch. Enumeration: 'ok': 3, 'unknown': 2, 'other': 1, 'critical': 5, 'nonCritical': 4, 'nonRecoverable': 6.
                           switchStatusMessage 1.3.6.1.4.1.789.1.11.3.1.8 displaystring read-only
A string describing the switch status, including a description of the condition (if any) that caused the status to be anything other than ok(3).
                           switchLinkSpeed 1.3.6.1.4.1.789.1.11.3.1.9 integer32 read-only
The link speed of the switch. The value is an integer whose units are Gbits (for example, a value of 2 represents a link speed of 2 Gbit).
                           switchHighPacketsProcessed 1.3.6.1.4.1.789.1.11.3.1.10 counter32 read-only
Number of Packets successfully processed since the last reboot/reset of the switch. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                           switchLowPacketsProcessed 1.3.6.1.4.1.789.1.11.3.1.11 counter32 read-only
Number of Packets successfully processed since the last reboot/reset of the switch. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                           switchHighPacketsRejected 1.3.6.1.4.1.789.1.11.3.1.12 counter32 read-only
Number of Packets rejected since the last reboot/reset of the switch. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                           switchLowPacketsRejected 1.3.6.1.4.1.789.1.11.3.1.13 counter32 read-only
Number of Packets rejected since the last reboot/reset of the switch. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                           switchFabricIndex 1.3.6.1.4.1.789.1.11.3.1.14 integer32 read-only
The index of the fabric on which this switch resides. The value ranges from 1 to the value of fabricInstances.
                           switch64PacketsProcessed 1.3.6.1.4.1.789.1.11.3.1.15 counter64 read-only
Number of Packets successfully processed since the last reboot/reset of the switch. This object returns all of the 64 bit unsigned integer.
                           switch64PacketsRejected 1.3.6.1.4.1.789.1.11.3.1.16 counter64 read-only
Number of Packets rejected since the last reboot/reset of the switch. This object returns all of the 64 bit unsigned integer.
                   portTable 1.3.6.1.4.1.789.1.11.4 no-access
Provide a list of ports connected to the fabric.
                       portEntry 1.3.6.1.4.1.789.1.11.4.1 no-access
Provide a report of current configuration and status of ports in the fabric.
                           portIndex 1.3.6.1.4.1.789.1.11.4.1.1 integer32 read-only
A number that identifies this port entry.
                           portName 1.3.6.1.4.1.789.1.11.4.1.2 octet string read-only
This is the WWN of the port.
                           portSwitchIndex 1.3.6.1.4.1.789.1.11.4.1.3 integer32 read-only
The index of the switch on which this port resides. The value ranges from 1 to the number of of switches.
                           portSwitchName 1.3.6.1.4.1.789.1.11.4.1.4 octet string read-only
This is the WWN of the switch to which the port is attached.
                           portNumber 1.3.6.1.4.1.789.1.11.4.1.5 integer32 read-only
The port number on the switch.
                           portType 1.3.6.1.4.1.789.1.11.4.1.6 integer read-only
The type of the port. Enumeration: 'unidentified': 1, 'nlPort': 3, 'fPort': 4, 'nPort': 2, 'bPort': 7, 'flPort': 5, 'ePort': 6.
                           portState 1.3.6.1.4.1.789.1.11.4.1.7 integer read-only
The current state of the port. Enumeration: 'unknown': 5, 'offline': 2, 'testing': 3, 'faulty': 4, 'online': 1.
                           portFabricIndex 1.3.6.1.4.1.789.1.11.4.1.8 integer32 read-only
The index of the fabric on which this port resides. The value ranges from 1 to the value of fabricInstances.
             dafs 1.3.6.1.4.1.789.1.12
                   dafsOptions 1.3.6.1.4.1.789.1.12.1
                       dafsIsLicensed 1.3.6.1.4.1.789.1.12.1.1 integer read-only
Whether the dafs protocol is licensed on the filer. Data ONTAP Specific Enumeration: 'true': 2, 'false': 1.
                       dafsMaxRequestsServer 1.3.6.1.4.1.789.1.12.1.2 integer32 read-only
Server wide maximum number of concurrent requests Data ONTAP Specific
                       dafsMaxRequests 1.3.6.1.4.1.789.1.12.1.3 integer32 read-only
Server maximum number of concurrent requests per session Data ONTAP Specific
                       dafsMaxRequestSize 1.3.6.1.4.1.789.1.12.1.4 integer32 read-only
Server maximum size of an inline request
                       dafsMaxResponseSize 1.3.6.1.4.1.789.1.12.1.5 integer32 read-only
Server maximum size of an inline response
                       dafsMaxPendingRequestsServer 1.3.6.1.4.1.789.1.12.1.6 integer32 read-only
Server wide maximum number of requests that can queue waiting for resources Data ONTAP Specific
                       dafsUseChecksums 1.3.6.1.4.1.789.1.12.1.7 integer read-only
Server uses checksums Enumeration: 'true': 2, 'false': 1.
                       dafsNicNumRequestDemons 1.3.6.1.4.1.789.1.12.1.8 integer32 read-only
Server default number of request demons per Nic. Data ONTAP Specific
                       dafsAnonymousAuthentication 1.3.6.1.4.1.789.1.12.1.9 integer read-only
Allow the server to acception connections with authentication type NONE. Enumeration: 'true': 2, 'false': 1.
                       dafsServerEnabled 1.3.6.1.4.1.789.1.12.1.10 integer read-only
Current status of the DAFS server. If true, the DAFS server is running. Enumeration: 'true': 2, 'false': 1.
                       dafsDefaultUid 1.3.6.1.4.1.789.1.12.1.11 integer32 read-only
Default client User ID if anonymously connected.
                       dafsDefaultGid 1.3.6.1.4.1.789.1.12.1.12 integer32 read-only
Default client Group ID if anonymously connected.
                       dafsMaxDisconnectedSessions 1.3.6.1.4.1.789.1.12.1.13 integer32 read-only
Maximum number of disconnected sessions for which the DAFS server will retain response cache data.
                       dafsMaxIdleSeconds 1.3.6.1.4.1.789.1.12.1.14 integer32 read-only
Maximum number of seconds server will keep a session open without hearing from the client.
                   dafsNicTable 1.3.6.1.4.1.789.1.12.2 no-access
A table containing DAFS NIC specific information.
                       dafsNicEntry 1.3.6.1.4.1.789.1.12.2.1 no-access
Information about a particular current DAFS nic. An object of this type is transient, in that it ceases to exist when (or soon after) the nic is detached.
                           dafsNicIndex 1.3.6.1.4.1.789.1.12.2.1.1 integer32 read-only
A unique value for each interface. Its value ranges between 1 and the value of DafsNicNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
                           dafsNicName 1.3.6.1.4.1.789.1.12.2.1.2 displaystring read-only
A textual string containing the logical name under which the nic has been attached.
                           dafsNicDevice 1.3.6.1.4.1.789.1.12.2.1.3 displaystring read-only
A textual string containing the physical name of the nic that has been attached.
                           dafsNicState 1.3.6.1.4.1.789.1.12.2.1.4 integer read-only
Current state of DAFS nic Enumeration: 'down': 2, 'testing': 3, 'up': 1.
                           dafsNicListenAddr 1.3.6.1.4.1.789.1.12.2.1.5 octet string read-only
Transport specific address structure giving the DAFS listen address for this NIC.
                           dafsNicNumRqstDemons 1.3.6.1.4.1.789.1.12.2.1.6 integer32 read-only
Number of request demons assigned to this Nic to handle Nic related events. Data ONTAP Specific
                           dafsNicInBytes 1.3.6.1.4.1.789.1.12.2.1.7 counter32 read-only
Total number of bytes, include DMA, received on this interface
                           dafsNicDirectInBytes 1.3.6.1.4.1.789.1.12.2.1.8 counter32 read-only
Total number of bytes read directly from the peer memory through this interface
                           dafsNicOutBytes 1.3.6.1.4.1.789.1.12.2.1.9 counter32 read-only
Total number of bytes, include DMA, sent on this interface
                           dafsNicDirectOutBytes 1.3.6.1.4.1.789.1.12.2.1.10 counter32 read-only
Total number of bytes written directly to the peer memory through this interface
                   curDafs 1.3.6.1.4.1.789.1.12.3
                       dafsPendingRequests 1.3.6.1.4.1.789.1.12.3.1 integer32 read-only
Server wide current number of requests that are queued waiting for resources Data ONTAP Specific
                       dafsCurrentRequests 1.3.6.1.4.1.789.1.12.3.2 integer32 read-only
Server wide current number of active requests Data ONTAP Specific
                   totDafs 1.3.6.1.4.1.789.1.12.4
                       dafsCalls 1.3.6.1.4.1.789.1.12.4.1 counter32 read-only
Total number of DAFS calls since last reboot
                       dafsClientAuths 1.3.6.1.4.1.789.1.12.4.2 counter32 read-only
Total number of Client Auth calls since last reboot
                       dafsClientConnects 1.3.6.1.4.1.789.1.12.4.3 counter32 read-only
Total number of Client Connect calls since last reboot
                       dafsClientConnectAuths 1.3.6.1.4.1.789.1.12.4.4 counter32 read-only
Total number of Client Connect Auth calls since last reboot
                       dafsConnectBinds 1.3.6.1.4.1.789.1.12.4.5 counter32 read-only
Total number of Connect Bind calls since last reboot
                       dafsDisconnects 1.3.6.1.4.1.789.1.12.4.6 counter32 read-only
Total number of Disconnect calls since last reboot
                       dafsRegisterCreds 1.3.6.1.4.1.789.1.12.4.7 counter32 read-only
Total number of Register Credential calls since last reboot
                       dafsReleaseCreds 1.3.6.1.4.1.789.1.12.4.8 counter32 read-only
Total number of Release Credential calls since last reboot
                       dafsSecinfos 1.3.6.1.4.1.789.1.12.4.9 counter32 read-only
Total number of Secinfo calls since last reboot
                       dafsServerAuths 1.3.6.1.4.1.789.1.12.4.10 counter32 read-only
Total number of Server Auth calls since last reboot
                       dafsCheckResponses 1.3.6.1.4.1.789.1.12.4.11 counter32 read-only
Total number of Check Response calls since last reboot
                       dafsFetchResponses 1.3.6.1.4.1.789.1.12.4.12 counter32 read-only
Total number of Fetch Response calls since last reboot
                       dafsDiscardResponses 1.3.6.1.4.1.789.1.12.4.13 counter32 read-only
Total number of Discard Responses calls since last reboot
                       dafsAccesses 1.3.6.1.4.1.789.1.12.4.14 counter32 read-only
Total number of Access calls since last reboot
                       dafsCacheHints 1.3.6.1.4.1.789.1.12.4.15 counter32 read-only
Total number of Cache Hint calls since last reboot
                       dafsCloses 1.3.6.1.4.1.789.1.12.4.16 counter32 read-only
Total number of Close calls since last reboot
                       dafsCommits 1.3.6.1.4.1.789.1.12.4.17 counter32 read-only
Total number of Commit calls since last reboot
                       dafsCreates 1.3.6.1.4.1.789.1.12.4.18 counter32 read-only
Total number of Create calls since last reboot
                       dafsDelegPurges 1.3.6.1.4.1.789.1.12.4.19 counter32 read-only
Total number of Delegate Purge calls since last reboot
                       dafsDelegReturns 1.3.6.1.4.1.789.1.12.4.20 counter32 read-only
Total number of Delegate Return calls since last reboot
                       dafsGetFsattrs 1.3.6.1.4.1.789.1.12.4.21 counter32 read-only
Total number of Get Fsattr calls since last reboot
                       dafsGetRootHandles 1.3.6.1.4.1.789.1.12.4.22 counter32 read-only
Total number of Get Root Handle calls since last reboot
                       dafsGetattrInlines 1.3.6.1.4.1.789.1.12.4.23 counter32 read-only
Total number of Getattr Inline calls since last reboot
                       dafsGetattrDirects 1.3.6.1.4.1.789.1.12.4.24 counter32 read-only
Total number of Getattr Direct calls since last reboot
                       dafsLinks 1.3.6.1.4.1.789.1.12.4.25 counter32 read-only
Total number of Link calls since last reboot
                       dafsLocks 1.3.6.1.4.1.789.1.12.4.26 counter32 read-only
Total number of Lock calls since last reboot
                       dafsLockts 1.3.6.1.4.1.789.1.12.4.27 counter32 read-only
Total number of LockT calls since last reboot
                       dafsLockus 1.3.6.1.4.1.789.1.12.4.28 counter32 read-only
Total number of LockU calls since last reboot
                       dafsLookUps 1.3.6.1.4.1.789.1.12.4.29 counter32 read-only
Total number of LookUp calls since last reboot
                       dafsLookUpps 1.3.6.1.4.1.789.1.12.4.30 counter32 read-only
Total number of LookUpp calls since last reboot
                       dafsNulls 1.3.6.1.4.1.789.1.12.4.31 counter32 read-only
Total number of Null calls since last reboot
                       dafsNverifys 1.3.6.1.4.1.789.1.12.4.32 counter32 read-only
Total number of Nverify calls since last reboot
                       dafsOpens 1.3.6.1.4.1.789.1.12.4.33 counter32 read-only
Total number of Open calls since last reboot
                       dafsOpenDowngrades 1.3.6.1.4.1.789.1.12.4.34 counter32 read-only
Total number of Open Downgrade calls since last reboot
                       dafsOpenattrs 1.3.6.1.4.1.789.1.12.4.35 counter32 read-only
Total number of Openattr calls since last reboot
                       dafsReadInlines 1.3.6.1.4.1.789.1.12.4.36 counter32 read-only
Total number of Read Inline calls since last reboot
                       dafsReadDirects 1.3.6.1.4.1.789.1.12.4.37 counter32 read-only
Total number of Read Direct calls since last reboot
                       dafsReaddirInlines 1.3.6.1.4.1.789.1.12.4.38 counter32 read-only
Total number of Readdir Inline calls since last reboot
                       dafsReaddirDirects 1.3.6.1.4.1.789.1.12.4.39 counter32 read-only
Total number of Readdir Direct calls since last reboot
                       dafsReadlinkInlines 1.3.6.1.4.1.789.1.12.4.40 counter32 read-only
Total number of Readlink Inline calls since last reboot
                       dafsReadlinkDirects 1.3.6.1.4.1.789.1.12.4.41 counter32 read-only
Total number of Readlink Direct calls since last reboot
                       dafsRemoves 1.3.6.1.4.1.789.1.12.4.42 counter32 read-only
Total number of Remove calls since last reboot
                       dafsRenames 1.3.6.1.4.1.789.1.12.4.43 counter32 read-only
Total number of Rename calls since last reboot
                       dafsSetattrInlines 1.3.6.1.4.1.789.1.12.4.44 counter32 read-only
Total number of Setattr Inline calls since last reboot
                       dafsSetattrDirects 1.3.6.1.4.1.789.1.12.4.45 counter32 read-only
Total number of Setattr Direct calls since last reboot
                       dafsVerifys 1.3.6.1.4.1.789.1.12.4.46 counter32 read-only
Total number of Verify calls since last reboot
                       dafsBatchSubmits 1.3.6.1.4.1.789.1.12.4.47 counter32 read-only
Total number of Batch Submit calls since last reboot
                       dafsWriteInlines 1.3.6.1.4.1.789.1.12.4.48 counter32 read-only
Total number of Write Inline calls since last reboot
                       dafsWriteDirects 1.3.6.1.4.1.789.1.12.4.49 counter32 read-only
Total number of Write Direct calls since last reboot
                       dafsBcGetattrs 1.3.6.1.4.1.789.1.12.4.50 counter32 read-only
Total number of BC Getattr calls since last reboot
                       dafsBcNulls 1.3.6.1.4.1.789.1.12.4.51 counter32 read-only
Total number of BC Null calls since last reboot
                       dafsBcRecalls 1.3.6.1.4.1.789.1.12.4.52 counter32 read-only
Total number of BC Recall calls since last reboot
                       dafsBcBatchCompletions 1.3.6.1.4.1.789.1.12.4.53 counter32 read-only
Total number of BC Batch Completion calls since last reboot
                       dafsAppendInlines 1.3.6.1.4.1.789.1.12.4.54 counter32 read-only
Total number of Append Inline calls since last reboot
                       dafsAppendDirects 1.3.6.1.4.1.789.1.12.4.55 counter32 read-only
Total number of Append Direct calls since last reboot
                       dafsGetFencingLists 1.3.6.1.4.1.789.1.12.4.56 counter32 read-only
Total number of Get Fencing List calls since last reboot
                       dafsSetFencingLists 1.3.6.1.4.1.789.1.12.4.57 counter32 read-only
Total number of Set Fencing List calls since last reboot
                       dafsHurryUps 1.3.6.1.4.1.789.1.12.4.58 counter32 read-only
Total number of Hurry Up calls since last reboot
                       dafsInBytes 1.3.6.1.4.1.789.1.12.4.59 counter32 read-only
Total number of bytes, including DMA, received since the last reboot
                       dafsDirectInBytes 1.3.6.1.4.1.789.1.12.4.60 counter32 read-only
Total number of bytes received directly into memory since last reboot
                       dafsOutBytes 1.3.6.1.4.1.789.1.12.4.61 counter32 read-only
Total number of bytes, including DMA, sent since the last reboot
                       dafsDirectOutBytes 1.3.6.1.4.1.789.1.12.4.62 counter32 read-only
Total number of bytes sent directly into remote memory since the last reboot
                   dafsSessionTable 1.3.6.1.4.1.789.1.12.5 no-access
A table containing current DAFS client session information.
                       dafsSessionEntry 1.3.6.1.4.1.789.1.12.5.1 no-access
Information about a particular DAFS session. An object of this type is transient, in that it ceases to exist when (or soon after) the client disconnects.
                           dafsSessionIndex 1.3.6.1.4.1.789.1.12.5.1.1 integer32 read-only
A unique value for each session.
                           dafsSessionId 1.3.6.1.4.1.789.1.12.5.1.2 octet string read-only
Session Identifier assigned by the server.
                           dafsSessionEndian 1.3.6.1.4.1.789.1.12.5.1.3 integer read-only
Byte order used on this session. Enumeration: 'littleEndian': 2, 'bigEndian': 1.
                           dafsSessionAllowBackChannel 1.3.6.1.4.1.789.1.12.5.1.4 integer read-only
Session may use a back control channel. Enumeration: 'true': 2, 'false': 1.
                           dafsSessionAllowRdmaReadChannel 1.3.6.1.4.1.789.1.12.5.1.5 integer read-only
Session may use a RDMA read channel. Enumeration: 'true': 2, 'false': 1.
                           dafsSessionUseChecksums 1.3.6.1.4.1.789.1.12.5.1.6 integer read-only
Session uses checksums. Enumeration: 'true': 2, 'false': 1.
                           dafsSessionMaxCredentials 1.3.6.1.4.1.789.1.12.5.1.7 integer32 read-only
Maximum number of credientials that can be registered on this session.
                           dafsSessionMaxRequestSize 1.3.6.1.4.1.789.1.12.5.1.8 integer32 read-only
Maximum size of a DAFS request.
                           dafsSessionMaxResponseSize 1.3.6.1.4.1.789.1.12.5.1.9 integer32 read-only
Maximum size of a DAFS response.
                           dafsSessionMaxRequests 1.3.6.1.4.1.789.1.12.5.1.10 integer32 read-only
Maximum number of concurrent requests.
                           dafsSessionInlineWriteHeaderSize 1.3.6.1.4.1.789.1.12.5.1.11 integer32 read-only
Size of DAFS headers plus padding to the start of data. Used to better align inline data.
                           dafsSessionClientIdString 1.3.6.1.4.1.789.1.12.5.1.12 octet string read-only
Client ID string supplied by the client. Intended to uniquely identify that client.
                           dafsSessionClientVerifier 1.3.6.1.4.1.789.1.12.5.1.13 octet string read-only
Supplied by the client to uniquely identify an instnce of a client.
                           dafsSessionNumCredentials 1.3.6.1.4.1.789.1.12.5.1.14 integer32 read-only
Current number of credentials registered on this session
                           dafsSessionNumRequests 1.3.6.1.4.1.789.1.12.5.1.15 integer32 read-only
Current number of active requests on this session
                   dafsExportTable 1.3.6.1.4.1.789.1.12.6 no-access
A table containing DAFS Export filesystems.
                       dafsExportEntry 1.3.6.1.4.1.789.1.12.6.1 no-access
Information about a particular current DAFS export. An object of this type is transient, in that it ceases to exist when (or soon after) the export is deleted.
                           dafsExportIndex 1.3.6.1.4.1.789.1.12.6.1.1 integer32 read-only
A unique value for each export. Its value ranges between 1 and the number of exports. The value for each export must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
                           dafsExportName 1.3.6.1.4.1.789.1.12.6.1.2 displaystring read-only
A textual string containing information about the export. This is the logical export name.
                           dafsExportPath 1.3.6.1.4.1.789.1.12.6.1.3 displaystring read-only
A textual string containing information about the export. This is the local filesystem path to the export.
                           dafsExportEnabled 1.3.6.1.4.1.789.1.12.6.1.4 integer read-only
This export is available for access. Enumeration: 'true': 2, 'false': 1.
                           dafsExportRwMode 1.3.6.1.4.1.789.1.12.6.1.5 integer read-only
Global export mode. This represents the maximum access rights. Enumeration: 'readwrite': 1, 'readonly': 3, 'readmostly': 2.
                           dafsExportAccessList 1.3.6.1.4.1.789.1.12.6.1.6 displaystring read-only
A textual string containing information about the export. This is the list of hosts that may access the export. If empty, all hosts may access the export.
             vi 1.3.6.1.4.1.789.1.13
                   viaNodeConnection 1.3.6.1.4.1.789.1.13.1
                       viaNodeSystemName 1.3.6.1.4.1.789.1.13.1.1 displaystring read-only
A string by which the node is identified in the cluster.
                       viaCreated 1.3.6.1.4.1.789.1.13.1.2 integer32 read-only
The number of VIs created.
                       viaConnectRequest 1.3.6.1.4.1.789.1.13.1.3 counter32 read-only
The number of times Connect Request call is made.
                       viaConnectWait 1.3.6.1.4.1.789.1.13.1.4 counter32 read-only
The number of times Connect wait call is made.
                       viaDisconnect 1.3.6.1.4.1.789.1.13.1.5 counter32 read-only
Number of times VI got disconnected with out any error.
                       viaConnectTimeOut 1.3.6.1.4.1.789.1.13.1.6 counter32 read-only
Number of times VI connect request got timed out.
                       viaConnected 1.3.6.1.4.1.789.1.13.1.7 counter32 read-only
Number of time VI got connected with out any error.
                       viaCurrConnectPending 1.3.6.1.4.1.789.1.13.1.8 gauge32 read-only
The number of VIs for which connect request is pending.
                       viaCurrConnectWaitPending 1.3.6.1.4.1.789.1.13.1.9 gauge32 read-only
The number of VIs for which connect wait request is pending.
                       viaCurrConnected 1.3.6.1.4.1.789.1.13.1.10 gauge32 read-only
The number of VIs for which the current state is CONNECTED.
                       viaCurrError 1.3.6.1.4.1.789.1.13.1.11 gauge32 read-only
The number of VIs for which the current state is ERROR
                       viaTotalError 1.3.6.1.4.1.789.1.13.1.12 counter32 read-only
The number of VIs which encountered error state.
                       viaInMsgs 1.3.6.1.4.1.789.1.13.1.13 counter32 read-only
The total number of incoming Messages received.
                       viaInRdma 1.3.6.1.4.1.789.1.13.1.14 counter32 read-only
The total number of incoming RDMA requests received.
                       viaInBytes 1.3.6.1.4.1.789.1.13.1.15 counter32 read-only
The total number of incoming bytes received, including those received in error. This count includes bytes received on currently established connections. This corresponds to the sum of bytes received through received messages, incoming RDMA writes and RDMA reads issued
                       viaInRDMAReadBytes 1.3.6.1.4.1.789.1.13.1.16 counter32 read-only
The total number of incoming bytes received through RDMA read, including those received in error. This count includes bytes received on currently established connections.
                       viaInRDMAWriteBytes 1.3.6.1.4.1.789.1.13.1.17 counter32 read-only
The total number of bytes received through incoming RDMA writes, including those received in error. This count includes bytes received on currently established connections.
                       viaOutMsgs 1.3.6.1.4.1.789.1.13.1.18 counter32 read-only
The total number of Messages sent.
                       viaOutRdma 1.3.6.1.4.1.789.1.13.1.19 counter32 read-only
The total number of RDMA requests sent.
                       viaOutBytes 1.3.6.1.4.1.789.1.13.1.20 counter32 read-only
The total number of bytes sent, including those sent in error. This count includes bytes sent on currently established connections.
                       viaOutRDMAReadBytes 1.3.6.1.4.1.789.1.13.1.21 counter32 read-only
The total number of bytes sent through an incoming RDMA read request, including those sent in error. This count includes bytes sent on currently established connections.
                       viaOutRDMAWriteBytes 1.3.6.1.4.1.789.1.13.1.22 counter32 read-only
The total number of bytes sent through a RDMA write operation, including those sent in error. This count includes bytes sent on currently established connections.
                       viaConnTable 1.3.6.1.4.1.789.1.13.1.23 no-access
A table containing via connection specific information.
                             viaConnEntry 1.3.6.1.4.1.789.1.13.1.23.1 no-access
A conceptual row of the viaConnTable containing information about a particular current via connection. Each row of this table is transient, and it ceases to exist when the connection makes transition to the CLOSED state.
                                 viaConnState 1.3.6.1.4.1.789.1.13.1.23.1.1 integer read-only
The state of this via connection Legal States: Idle 1 Pending Connect 2 Connected 3 Error 4 Enumeration: 'idle': 1, 'pendingConnect': 2, 'connected': 3, 'error': 4.
                                 viaConnVINumber 1.3.6.1.4.1.789.1.13.1.23.1.2 integer32 read-only
A number which uniquely defines a connection.
                                 viaConnRemoteNetAddress 1.3.6.1.4.1.789.1.13.1.23.1.3 ipaddress read-only
IP address of the remote system of the connection.
                                 viaConnLocalNetAddress 1.3.6.1.4.1.789.1.13.1.23.1.4 ipaddress read-only
Local IPadress of the connection.
                                 viaConnRemotePortNumber 1.3.6.1.4.1.789.1.13.1.23.1.5 integer32 read-only
Remote TCP portnumber of the connection.
                                 viaConnLocalPortNumber 1.3.6.1.4.1.789.1.13.1.23.1.6 integer32 read-only
Local TCP Portnumber of the connection.
                                 viaConnLocalDescriminator 1.3.6.1.4.1.789.1.13.1.23.1.7 octet string read-only
An identifier used by the local process to identify the VI connection.
                                 viaConnRemoteDescriminator 1.3.6.1.4.1.789.1.13.1.23.1.8 octet string read-only
An identifier used by the remote process to identify the VI connection.
                                 viaConnLocalMaxTransferSize 1.3.6.1.4.1.789.1.13.1.23.1.9 integer32 read-only
The local limit on the maximum packet size that can be transfered through the connection.
                                 viaConnRemoteMaxTransferSize 1.3.6.1.4.1.789.1.13.1.23.1.10 integer32 read-only
The remote limit on the maximum packet size that can be transfered through the connection.
                                 viaConnLocalEnableRdmaWrite 1.3.6.1.4.1.789.1.13.1.23.1.11 integer32 read-only
The value is 1 if remote DMA write is enabled in the local system otherwise, it is 0.
                                 viaConnLocalEnableRdmaRead 1.3.6.1.4.1.789.1.13.1.23.1.12 integer32 read-only
The value is 1 if remote DMA read is enabled in the local system otherwise, it is 0.
                                 viaConnRemoteEnableRdmaWrite 1.3.6.1.4.1.789.1.13.1.23.1.13 integer32 read-only
The value is 1 if remote DMA write is enabled in the remote system otherwise, it is 0.
                                 viaConnRemoteEnableRdmaRead 1.3.6.1.4.1.789.1.13.1.23.1.14 integer32 read-only
The value is 1 if remote DMA read is enabled in the remote system otherwise, it is 0.
                                 viaConnSentMessages 1.3.6.1.4.1.789.1.13.1.23.1.15 counter32 read-only
Total number of messages sent through the connection.
                                 viaConnSentRdmaReadMessages 1.3.6.1.4.1.789.1.13.1.23.1.16 counter32 read-only
Total number of rdma read messages sent through the connection.
                                 viaConnSentRdmaWriteMessages 1.3.6.1.4.1.789.1.13.1.23.1.17 counter32 read-only
Total number of rdma write messages sent through the connection.
                                 viaConnRcvdMessages 1.3.6.1.4.1.789.1.13.1.23.1.18 counter32 read-only
Total number of messages received through the connection.
                                 viaConnRcvdRdmaReadMessages 1.3.6.1.4.1.789.1.13.1.23.1.19 counter32 read-only
Total number of rdma read messages received through the connection.
                                 viaConnRcvdRdmaWriteMessages 1.3.6.1.4.1.789.1.13.1.23.1.20 counter32 read-only
Total number of rdma write messages received through the connection.
                   viaErrors 1.3.6.1.4.1.789.1.13.2
                       viaErrPostDesc 1.3.6.1.4.1.789.1.13.2.1 counter32 read-only
The total number of descriptors completed in error by NIC.
                       viaErrConnLost 1.3.6.1.4.1.789.1.13.2.2 counter32 read-only
The total number of Lost Connection errors.
                       viaErrRecvQEmpty 1.3.6.1.4.1.789.1.13.2.3 counter32 read-only
The total number of errors due to an empty receive Queue.
                       viaErrRdmawProt 1.3.6.1.4.1.789.1.13.2.4 counter32 read-only
The total number of remote DMA write protection errors.
                       viaErrRdmarProt 1.3.6.1.4.1.789.1.13.2.5 counter32 read-only
The total number of remote DMA read protection errors.
                       viaErrCompProt 1.3.6.1.4.1.789.1.13.2.6 counter32 read-only
The total number of protection errors.
                       viaErrorThreshold 1.3.6.1.4.1.789.1.13.2.7 integer32 read-only
Setting this threshold will cause a trap to be enabled such that if the total error exceeds error threshold set a viaNodeErrorsTrap trap will be generated.
                   viaNicAttributes 1.3.6.1.4.1.789.1.13.3
                       viaNicTable 1.3.6.1.4.1.789.1.13.3.1 no-access
A table containing via NIC-specific information.
                           viaNicEntry 1.3.6.1.4.1.789.1.13.3.1.1 no-access
A conceptual row of the viaNicTable containing information about a particular present VINic.
                               viaNicIndex 1.3.6.1.4.1.789.1.13.3.1.1.1 integer32 read-only
The index of the NIC in the NIC table.
                               viaName 1.3.6.1.4.1.789.1.13.3.1.1.2 displaystring read-only
The symbolic name of the NIC device.
                               viaHardwareVersion 1.3.6.1.4.1.789.1.13.3.1.1.3 displaystring read-only
The version of the VINIC described by this MIB.
                               viaProviderVersion 1.3.6.1.4.1.789.1.13.3.1.1.4 displaystring read-only
The version of the VI provider.
                               viaNicAddress 1.3.6.1.4.1.789.1.13.3.1.1.5 physaddress read-only
The Network address of this NIC.
                               viaThreadSafe 1.3.6.1.4.1.789.1.13.3.1.1.6 integer32 read-only
1 if synchronisation model is thread safe else 0.
                               viaMaxDiscriminatorLength 1.3.6.1.4.1.789.1.13.3.1.1.7 integer32 read-only
The maximum number of bytes that the VI provider allows for a connection descriminator.
                               viaMaxRegisterBytes 1.3.6.1.4.1.789.1.13.3.1.1.8 integer32 read-only
Maximum number of bytes that can be registered.
                               viaMaxRegisterRegions 1.3.6.1.4.1.789.1.13.3.1.1.9 integer32 read-only
Maximum number of memory regions that can be registered.
                               viaMaxRegisterBlockBytes 1.3.6.1.4.1.789.1.13.3.1.1.10 integer32 read-only
Largest contiguous block of memory that can be registered.
                               viaMaxVI 1.3.6.1.4.1.789.1.13.3.1.1.11 integer32 read-only
The limit on the total number of VI instances this entity can support.
                               viaMaxDescriptorsPerQueue 1.3.6.1.4.1.789.1.13.3.1.1.12 integer32 read-only
Maximum Descriptors per VI Work Queue that this VI provider can support.
                               viaMaxSegmentsPerDesc 1.3.6.1.4.1.789.1.13.3.1.1.13 integer32 read-only
Maximum number of segments per descriptor that this VI provider can support.
                               viaMaxCQ 1.3.6.1.4.1.789.1.13.3.1.1.14 integer32 read-only
Maximum number of completion queues this VI provider can support.
                               viaMaxCQEntries 1.3.6.1.4.1.789.1.13.3.1.1.15 integer32 read-only
Maximum number of Completion queue entries per completion queue that this VI provider can support.
                               viaMaxTransferSize 1.3.6.1.4.1.789.1.13.3.1.1.16 integer32 read-only
The maximum transfer size supported by the VI Nic. The maximum transfer size is the amount of data that can be described by a single VI descriptor.
                               viaNativeMTU 1.3.6.1.4.1.789.1.13.3.1.1.17 integer32 read-only
The native MTU size of the underlying network. For frame-based networks, this could reflect its native frame size. For cell-based networks, it could reflect the MTU of the appropriate abstraction layer that it supports.
                               viaMaxPTags 1.3.6.1.4.1.789.1.13.3.1.1.18 integer32 read-only
The maximum number of protection tags that are supported by this VI provider.
                               viaCurrRegisterBytes 1.3.6.1.4.1.789.1.13.3.1.1.19 integer32 read-only
Number of bytes registered by the VI user for this NIC.
                               viaCurrRegisterRegions 1.3.6.1.4.1.789.1.13.3.1.1.20 integer32 read-only
Number of memory regions that is registered by VI user for this NIC.
                               viaCurrVI 1.3.6.1.4.1.789.1.13.3.1.1.21 integer32 read-only
The current number of VI instances for this NIC.
                               viaCurrCQ 1.3.6.1.4.1.789.1.13.3.1.1.22 integer32 read-only
Current number of completion queues this VI provider has.
                               viaCurrPTags 1.3.6.1.4.1.789.1.13.3.1.1.23 integer32 read-only
Current Number of protection tags this VI provider has.
                               viaConnectionListenPort 1.3.6.1.4.1.789.1.13.3.1.1.24 integer32 read-only
Port number on which VI server is listening for VI connection request.
             backup 1.3.6.1.4.1.789.1.14
                   dump 1.3.6.1.4.1.789.1.14.1
                       dmpActives 1.3.6.1.4.1.789.1.14.1.1 integer32 read-only
Number of active dump.
                       dmpAttempts 1.3.6.1.4.1.789.1.14.1.2 counter32 read-only
Number of dump attempted.
                       dmpSuccesses 1.3.6.1.4.1.789.1.14.1.3 counter32 read-only
Number of dump succeeded.
                       dmpFailures 1.3.6.1.4.1.789.1.14.1.4 counter32 read-only
Number of dump failed.
                       dmpTable 1.3.6.1.4.1.789.1.14.1.5 no-access
Provides a report of dumps on each dump subtree.
                           dmpEntry 1.3.6.1.4.1.789.1.14.1.5.1 no-access
Shows statistics of dumps on an unique dump subtree.
                               dmpIndex 1.3.6.1.4.1.789.1.14.1.5.1.1 integer32 read-only
Index into the subtree dump table.
                               dmpStPath 1.3.6.1.4.1.789.1.14.1.5.1.2 displaystring read-only
The full path to the dump subtree. In the format of /vol//...
                               dmpStAttempts 1.3.6.1.4.1.789.1.14.1.5.1.3 counter32 read-only
No. of dump attempted for the subtree.
                               dmpStSuccesses 1.3.6.1.4.1.789.1.14.1.5.1.4 counter32 read-only
No. of dump succeeded for the subtree.
                               dmpStFailures 1.3.6.1.4.1.789.1.14.1.5.1.5 counter32 read-only
No. of dump failed for the subtree.
                               dmpTime 1.3.6.1.4.1.789.1.14.1.5.1.6 integer32 read-only
The start time for the last attempt to dump the subtree, including the currently running one. The time in seconds since January 1, 1970.
                               dmpStatus 1.3.6.1.4.1.789.1.14.1.5.1.7 integer read-only
The status for the last dump attempt on the subtree. Enumeration: 'on': 2, 'off': 1.
                               dmpLevel 1.3.6.1.4.1.789.1.14.1.5.1.8 integer32 read-only
The level of the dump.
                               dmpNumFiles 1.3.6.1.4.1.789.1.14.1.5.1.9 integer32 read-only
The number of files dumped.
                               dmpDataAmount 1.3.6.1.4.1.789.1.14.1.5.1.10 integer32 read-only
The amount of data dumped, in Megabytes.
                               dmpStartTime 1.3.6.1.4.1.789.1.14.1.5.1.11 integer32 read-only
The start time of the dump. The time is in seconds since January 1, 1970.
                               dmpDuration 1.3.6.1.4.1.789.1.14.1.5.1.12 timeticks read-only
The duration of the dump.
                   restore 1.3.6.1.4.1.789.1.14.2
                       rstActives 1.3.6.1.4.1.789.1.14.2.1 integer32 read-only
Number of active restore.
                       rstAttempts 1.3.6.1.4.1.789.1.14.2.2 counter32 read-only
Number of restore attempted.
                       rstSuccesses 1.3.6.1.4.1.789.1.14.2.3 counter32 read-only
Number of restore succeeded.
                       rstFailures 1.3.6.1.4.1.789.1.14.2.4 counter32 read-only
Number of restore failed.
             vfiler 1.3.6.1.4.1.789.1.16
                   vfilerIsLicensed 1.3.6.1.4.1.789.1.16.1 integer read-only
Whether vfiler is licensed on the filer. Enumeration: 'true': 2, 'false': 1.
                   vfFilers 1.3.6.1.4.1.789.1.16.2 counter32 read-only
Number of vfilers in the physical Filer.
                   vfTable 1.3.6.1.4.1.789.1.16.3 no-access
Provide a report of per-vfiler general information
                       vfEntry 1.3.6.1.4.1.789.1.16.3.1 no-access
Provide a report of per-vfiler information
                           vfIndex 1.3.6.1.4.1.789.1.16.3.1.1 integer32 read-only
A number that identifies this entry for the referenced vfiler.
                           vfName 1.3.6.1.4.1.789.1.16.3.1.2 displaystring read-only
A textual string that contains the name of the referenced vfiler.
                           vfUuid 1.3.6.1.4.1.789.1.16.3.1.3 octet string read-only
The UUID of the referenced vfiler.
                           vfIpAddresses 1.3.6.1.4.1.789.1.16.3.1.4 integer32 read-only
The total number of IP addresses for the referenced vfiler.
                           vfStoragePaths 1.3.6.1.4.1.789.1.16.3.1.5 integer32 read-only
The total number of storage paths for the referenced vfiler.
                           vfIpSpace 1.3.6.1.4.1.789.1.16.3.1.6 displaystring read-only
A textual string that contains the name of the ipspace that the referenced vfiler belongs to.
                           vfAllowedProtocols 1.3.6.1.4.1.789.1.16.3.1.7 integer32 read-only
Total number of protocols allowed for the referenced vfiler.
                           vfDisallowedProtocols 1.3.6.1.4.1.789.1.16.3.1.8 integer32 read-only
Total number of protocols disallowed for the referenced vfiler.
                           vfState 1.3.6.1.4.1.789.1.16.3.1.9 integer read-only
Status of the vfiler: Running or stopped. Enumeration: 'running': 2, 'stopped': 1.
                   vfIpTable 1.3.6.1.4.1.789.1.16.4 no-access
Provide a report of per-vfiler IP addresses information
                       vfIpEntry 1.3.6.1.4.1.789.1.16.4.1 no-access
Provide a report of per-vfiler IP addresses information
                           vfFiIndex 1.3.6.1.4.1.789.1.16.4.1.1 integer32 read-only
A number that identifies the referenced vfiler.
                           vfIpIndex 1.3.6.1.4.1.789.1.16.4.1.2 integer32 read-only
A number that identifies which IP address in the referenced vfiler.
                           vfIpAddr 1.3.6.1.4.1.789.1.16.4.1.3 ipaddress read-only
A IP address for the referenced vfiler.
                   vfSpTable 1.3.6.1.4.1.789.1.16.5 no-access
Provide a report of per-vfiler storage path information
                       vfSpEntry 1.3.6.1.4.1.789.1.16.5.1 no-access
Provide a report of per-vfiler storage path information
                           vfFsIndex 1.3.6.1.4.1.789.1.16.5.1.1 integer32 read-only
A number that identifies the referenced vfiler.
                           vfSpIndex 1.3.6.1.4.1.789.1.16.5.1.2 integer32 read-only
A number that identifies which storage path in the referenced vfiler.
                           vfSpName 1.3.6.1.4.1.789.1.16.5.1.3 octet string read-only
The storage path name for the referenced vfiler.
                   vfProTable 1.3.6.1.4.1.789.1.16.6 no-access
Provide a report of per-vfiler protocol information
                       vfProEntry 1.3.6.1.4.1.789.1.16.6.1 no-access
Provide a report of per-vfiler protocol information
                           vfFpIndex 1.3.6.1.4.1.789.1.16.6.1.1 integer32 read-only
A number that identifies the referenced vfiler.
                           vfProIndex 1.3.6.1.4.1.789.1.16.6.1.2 integer32 read-only
A number that identifies a protocol in the referenced vfiler.
                           vfProName 1.3.6.1.4.1.789.1.16.6.1.3 octet string read-only
A textual string that contains the protocol name for the referenced vfiler.
                           vfProStatus 1.3.6.1.4.1.789.1.16.6.1.4 integer read-only
Whether the referenced vfiler protocol is allowed or disallowed. Enumeration: 'true': 2, 'false': 1.
             blocks 1.3.6.1.4.1.789.1.17
                   fcpIsLicensed 1.3.6.1.4.1.789.1.17.1 integer read-only
Whether FCP access protocols are licensed on the filer. Enumeration: 'true': 2, 'false': 1.
                   iscsiIsLicensed 1.3.6.1.4.1.789.1.17.2 integer read-only
Whether iSCSI access protocols are licensed on the filer. Enumeration: 'true': 2, 'false': 1.
                   fcpLowReadBytes 1.3.6.1.4.1.789.1.17.3 counter32 read-only
The total number of bytes read via FCP since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                   fcpHighReadBytes 1.3.6.1.4.1.789.1.17.4 counter32 read-only
The total number of bytes read via FCP since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                   fcpLowWriteBytes 1.3.6.1.4.1.789.1.17.5 counter32 read-only
The total number of bytes written via FCP since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                   fcpHighWriteBytes 1.3.6.1.4.1.789.1.17.6 counter32 read-only
The total number of bytes written via FCP since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                   iscsiLowReadBytes 1.3.6.1.4.1.789.1.17.7 counter32 read-only
The total number of bytes read via iSCSI since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                   iscsiHighReadBytes 1.3.6.1.4.1.789.1.17.8 counter32 read-only
The total number of bytes read via iSCSI since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                   iscsiLowWriteBytes 1.3.6.1.4.1.789.1.17.9 counter32 read-only
The total number of bytes written via iSCSI since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                   iscsiHighWriteBytes 1.3.6.1.4.1.789.1.17.10 counter32 read-only
The total number of bytes written via iSCSI since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                   iscsiHighOps 1.3.6.1.4.1.789.1.17.11 counter32 read-only
The total number of iSCSI ops handled since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                   iscsiLowOps 1.3.6.1.4.1.789.1.17.12 counter32 read-only
The total number of iSCSI ops handled since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                   fcpHighOps 1.3.6.1.4.1.789.1.17.13 counter32 read-only
The total number of FCP ops handled since the last boot. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                   fcpLowOps 1.3.6.1.4.1.789.1.17.14 counter32 read-only
The total number of FCP ops handled since the last boot. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                   lun 1.3.6.1.4.1.789.1.17.15
                         lunCount 1.3.6.1.4.1.789.1.17.15.1 integer32 read-only
Number of LUNs in the Filer.
                         lunTable 1.3.6.1.4.1.789.1.17.15.2 no-access
Provide a report of per-LUN general information
                             lunEntry 1.3.6.1.4.1.789.1.17.15.2.1 no-access
Provide a report of per-LUN information
                                 lunIndex 1.3.6.1.4.1.789.1.17.15.2.1.1 integer32 read-only
A number that identifies the referenced LUN.
                                 lunName 1.3.6.1.4.1.789.1.17.15.2.1.2 displaystring read-only
The name of the LUN. This is also the path to the LUN on the filer.
                                 lunComment 1.3.6.1.4.1.789.1.17.15.2.1.3 displaystring read-only
The comment, if any, for this LUN.
                                 lunSizeLow 1.3.6.1.4.1.789.1.17.15.2.1.4 integer32 read-only
Size of the LUN in bytes. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                                 lunSizeHigh 1.3.6.1.4.1.789.1.17.15.2.1.5 integer32 read-only
Size of the LUN in bytes. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                                 lunMapped 1.3.6.1.4.1.789.1.17.15.2.1.6 integer read-only
This LUN has been mapped to at least one initiator group. Enumeration: 'true': 2, 'false': 1.
                                 lunSerialNumber 1.3.6.1.4.1.789.1.17.15.2.1.7 displaystring read-only
The 12 character SCSI serial number of the LUN.
                                 lunQtreeName 1.3.6.1.4.1.789.1.17.15.2.1.8 displaystring read-only
A string that indicates which qtree this LUN belongs to.
                                 lunHighOps 1.3.6.1.4.1.789.1.17.15.2.1.9 counter32 read-only
The total number of Target side SCSI ops for this LUN since the stats were last reset. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                                 lunLowOps 1.3.6.1.4.1.789.1.17.15.2.1.10 counter32 read-only
The total number of Target side SCSI ops for this LUN since the stats were last reset. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                                 lunHighReadBytes 1.3.6.1.4.1.789.1.17.15.2.1.11 counter32 read-only
The total number of bytes read from this LUN since the stats were last reset. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                                 lunLowReadBytes 1.3.6.1.4.1.789.1.17.15.2.1.12 counter32 read-only
The total number of bytes read from this LUN since the stats were last reset. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                                 lunHighWriteBytes 1.3.6.1.4.1.789.1.17.15.2.1.13 counter32 read-only
The total number of bytes written to this LUN since the stats were last reset. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                                 lunLowWriteBytes 1.3.6.1.4.1.789.1.17.15.2.1.14 counter32 read-only
The total number of bytes written to this LUN since the stats were last reset. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                                 lunHighErrors 1.3.6.1.4.1.789.1.17.15.2.1.15 counter32 read-only
The total number of errors seen on this LUN since the stats were last reset. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                                 lunLowErrors 1.3.6.1.4.1.789.1.17.15.2.1.16 counter32 read-only
The total number of errors seen on this LUN since the stats were last reset. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                                 lunOnline 1.3.6.1.4.1.789.1.17.15.2.1.17 integer read-only
Whether the LUN is online. Enumeration: 'true': 2, 'false': 1.
                                 lunSnapStatus 1.3.6.1.4.1.789.1.17.15.2.1.18 integer read-only
Whether a snapshot of this LUN can be taken. Enumeration: 'true': 2, 'false': 1.
                                 lunShareStatus 1.3.6.1.4.1.789.1.17.15.2.1.19 integer read-only
The sharing status for the LUN. Enumeration: 'read': 2, 'write': 3, 'none': 1, 'all': 4.
                                 lunSpaceReserved 1.3.6.1.4.1.789.1.17.15.2.1.20 integer read-only
Whether the LUN has space reservation enabled. Enumeration: 'true': 2, 'false': 1.
                                 lunStatsResetTime 1.3.6.1.4.1.789.1.17.15.2.1.21 integer32 read-only
Number of seconds since this LUN's stats were last reset.
                                 lunHighReadOps 1.3.6.1.4.1.789.1.17.15.2.1.22 counter32 read-only
The total number of Target side SCSI read ops for this LUN since the stats were last reset. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                                 lunLowReadOps 1.3.6.1.4.1.789.1.17.15.2.1.23 counter32 read-only
The total number of Target side SCSI read ops for this LUN since the stats were last reset. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                                 lunHighWriteOps 1.3.6.1.4.1.789.1.17.15.2.1.24 counter32 read-only
The total number of Target side SCSI write ops for this LUN since the stats were last reset. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                                 lunLowWriteOps 1.3.6.1.4.1.789.1.17.15.2.1.25 counter32 read-only
The total number of Target side SCSI write ops for this LUN since the stats were last reset. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                                 lunHighOtherOps 1.3.6.1.4.1.789.1.17.15.2.1.26 counter32 read-only
The total number of Target side SCSI ops that are not read or write for this LUN since the stats were last reset. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                                 lunLowOtherOps 1.3.6.1.4.1.789.1.17.15.2.1.27 counter32 read-only
The total number of Target side SCSI ops that are not read or write for this LUN since the stats were last reset. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                                 lunSize64 1.3.6.1.4.1.789.1.17.15.2.1.28 counter64 read-only
Size of the LUN in bytes. This object returns all of the 64 bit unsigned integer.
                                 lun64Ops 1.3.6.1.4.1.789.1.17.15.2.1.29 counter64 read-only
The total number of Target side SCSI ops for this LUN since the stats were last reset. This object all of the 64 bit unsigned integer.
                                 lun64ReadBytes 1.3.6.1.4.1.789.1.17.15.2.1.30 counter64 read-only
The total number of bytes read from this LUN since the stats were last reset. This object returns all of the 64 bit unsigned integer.
                                 lun64WriteBytes 1.3.6.1.4.1.789.1.17.15.2.1.31 counter64 read-only
The total number of bytes written to this LUN since the stats were last reset. This object returns all of the 64 bit unsigned integer.
                                 lun64Errors 1.3.6.1.4.1.789.1.17.15.2.1.32 counter64 read-only
The total number of errors seen on this LUN since the stats were last reset. This object returns all the 64 bit unsigned integer.
                                 lun64ReadOps 1.3.6.1.4.1.789.1.17.15.2.1.33 counter64 read-only
The total number of Target side SCSI read ops for this LUN since the stats were last reset. This object returns all of the 64 bit unsigned integer.
                                 lun64WriteOps 1.3.6.1.4.1.789.1.17.15.2.1.34 counter64 read-only
The total number of Target side SCSI write ops for this LUN since the stats were last reset. This object returns all of the 64 bit unsigned integer.
                                 lun64OtherOps 1.3.6.1.4.1.789.1.17.15.2.1.35 counter64 read-only
The total number of Target side SCSI ops that are not read or write for this LUN since the stats were last reset. This object returns all of the 64 bit unsigned integer.
                         lunMapTable 1.3.6.1.4.1.789.1.17.15.3 no-access
Provide a table listing the initiator group to Logical Unit Number mapping for each LUN.
                             lunMapEntry 1.3.6.1.4.1.789.1.17.15.3.1 no-access
Provide a per LUN and Initiator group mapping of SCSI logical unit numbers.
                                 lunMapLUNIndex 1.3.6.1.4.1.789.1.17.15.3.1.1 integer32 read-only
A number that identifies the LUN in the table.
                                 lunMapInitiatorGroupIndex 1.3.6.1.4.1.789.1.17.15.3.1.2 integer32 read-only
A number that identifies an initiator group in the table.
                                 lunMapLUNName 1.3.6.1.4.1.789.1.17.15.3.1.3 displaystring read-only
The name of the LUN.
                                 lunMapInitiatorGroupName 1.3.6.1.4.1.789.1.17.15.3.1.4 displaystring read-only
The name of the initiator group that this LUN is mapped to.
                                 lunMapLogicalUnitNumber 1.3.6.1.4.1.789.1.17.15.3.1.5 integer32 read-only
SCSI Logical Unit Number that this LUN is mapped to for this initiator group.
                   initiator 1.3.6.1.4.1.789.1.17.16
                         initiatorGroupTable 1.3.6.1.4.1.789.1.17.16.1 no-access
Provide a report of per-initiator group general information
                             initiatorGroupEntry 1.3.6.1.4.1.789.1.17.16.1.1 no-access
Provide a report of per-initiator group information
                                 initiatorGroupIndex 1.3.6.1.4.1.789.1.17.16.1.1.1 integer32 read-only
A number that identifies a specific initiator group.
                                 initiatorGroupName 1.3.6.1.4.1.789.1.17.16.1.1.2 displaystring read-only
The name of the initiator group
                                 initiatorGroupType 1.3.6.1.4.1.789.1.17.16.1.1.3 integer read-only
Type of this initiator group, either iSCSI or FCP Enumeration: 'fcp': 1, 'iSCSI': 2.
                                 initiatorGroupOS 1.3.6.1.4.1.789.1.17.16.1.1.4 integer read-only
Operating system the clients in this initiator group run. This governs the finer details of SCSI protocol interaction with these initiators Enumeration: 'solaris': 2, 'aix': 5, 'openvms': 10, 'default': 1, 'invalid': 256, 'windows': 3, 'defaultPartner': 7, 'linux': 6, 'hpux': 4, 'vmware': 9, 'netware': 8.
                                 initiatorGroupThrottleReserve 1.3.6.1.4.1.789.1.17.16.1.1.5 integer32 read-only
Percentage of filer scsi command blocks reserved for this initiator group
                                 initiatorGroupThrottleBorrow 1.3.6.1.4.1.789.1.17.16.1.1.6 integer read-only
True if this inititiator group is allowed to exceed it's throttle settings if more resources are needed and otherwise available. If initiatorGroupThrottleReserve is 0, this value is meaningless Enumeration: 'true': 2, 'false': 1.
                                 initiatorGroupUsePartner 1.3.6.1.4.1.789.1.17.16.1.1.7 integer read-only
The takeover mode for the initiator group. This is only applicable to FCP initiator groups on clustered filers Enumeration: 'true': 2, 'false': 1.
                                 initiatorGroupUseALUA 1.3.6.1.4.1.789.1.17.16.1.1.8 integer read-only
If true this initiator group supports Asymetric Logical Unit Access. Enumeration: 'true': 2, 'false': 1.
                         initiatorGroupMemberTable 1.3.6.1.4.1.789.1.17.16.2 no-access
Table of individual Initator names in each Initiator group
                             initiatorGroupMemberEntry 1.3.6.1.4.1.789.1.17.16.2.1 no-access
Provide a report of per-initiator group information
                                 initiatorGroupMemberIndex 1.3.6.1.4.1.789.1.17.16.2.1.1 integer32 read-only
A number that identifies a specific initiator group.
                                 initiatorGroupMemberNameIndex 1.3.6.1.4.1.789.1.17.16.2.1.2 integer32 read-only
A number the identifies the initiator in the group.
                                 initiatorName 1.3.6.1.4.1.789.1.17.16.2.1.3 displaystring read-only
A textual name for this initiator.
                         initiatorListTable 1.3.6.1.4.1.789.1.17.16.3 no-access
Table of initiators that are connected to the filer.
                             initiatorListEntry 1.3.6.1.4.1.789.1.17.16.3.1 no-access
Provide a report of per-connected-initiator information.
                                 initiatorListEntryIndex 1.3.6.1.4.1.789.1.17.16.3.1.1 integer32 read-only
A number that identifies the initiator connected to the target adapter.
                                 targetAdapterName 1.3.6.1.4.1.789.1.17.16.3.1.2 displaystring read-only
The name of the target adapter in the filer.
                                 connectedInitiatorNodeName 1.3.6.1.4.1.789.1.17.16.3.1.3 displaystring read-only
A textual name for this initiator node.
                                 connectedInitiatorPortName 1.3.6.1.4.1.789.1.17.16.3.1.4 displaystring read-only
The FibreChannel device's portname. This is FCP only.
                                 connectedInitiatorType 1.3.6.1.4.1.789.1.17.16.3.1.5 integer read-only
Type of this init group, either iSCSI or FCP Enumeration: 'fcp': 1, 'iSCSI': 2.
                                 connectedInitiatorIsid 1.3.6.1.4.1.789.1.17.16.3.1.6 displaystring read-only
The iSCSI isid (initiator session id) for this initiator. This is iSCSI only.
                                 connectedInitiatorPortalGroup 1.3.6.1.4.1.789.1.17.16.3.1.7 integer32 read-only
The iSCSI portal group ID for this initiator. This is iSCSI only.
                   fcpTarget 1.3.6.1.4.1.789.1.17.17
                         fcpTargetTable 1.3.6.1.4.1.789.1.17.17.1 no-access
Provide a report of fcp target adapter general information
                             fcpTargetTableEntry 1.3.6.1.4.1.789.1.17.17.1.1 no-access
Provide a report of per fcp target device information
                                 fcpTargetTableIndex 1.3.6.1.4.1.789.1.17.17.1.1.1 integer32 read-only
A number that identifies a specific fcp target device.
                                 fcpTargetName 1.3.6.1.4.1.789.1.17.17.1.1.2 displaystring read-only
The name of the fcp target device
                                 fcpTargetNN 1.3.6.1.4.1.789.1.17.17.1.1.3 displaystring read-only
The FC WWNN of the fcp target device
                                 fcpTargetPN 1.3.6.1.4.1.789.1.17.17.1.1.4 displaystring read-only
The FC WWPN of the fcp target device
                                 fcpTargetSpeed 1.3.6.1.4.1.789.1.17.17.1.1.5 integer32 read-only
speed in gigabits per second. 0 is unknown.
                                 fcpTargetStatus 1.3.6.1.4.1.789.1.17.17.1.1.6 integer read-only
Status of the fcp target adapter Enumeration: 'uninitialized': 2, 'resetting': 8, 'linkDisconnected': 7, 'startup': 1, 'unknown': 11, 'offlinedByUserSystem': 10, 'linkNotConnected': 4, 'waitingForLinkUp': 5, 'online': 6, 'offline': 9, 'initializingFW': 3.
                                 fcpTargetStandby 1.3.6.1.4.1.789.1.17.17.1.1.7 integer read-only
Whether this target adapter is in standby mode. Enumeration: 'true': 2, 'false': 1.
                                 fcpTargetTopology 1.3.6.1.4.1.789.1.17.17.1.1.8 integer read-only
fibre channel topology for this adapter. Enumeration: 'unknown': 1, 'fabric': 2, 'loop': 4, 'pointToPoint': 3.
                                 fcpTargetType 1.3.6.1.4.1.789.1.17.17.1.1.9 integer read-only
Responsibility/Type for this adapter. Enumeration: 'standby': 3, 'partner': 4, 'local': 2, 'unknown': 5, 'physical': 1.
                   fcpCfMode 1.3.6.1.4.1.789.1.17.18 integer read-only
Failover setting for the FCP target cluster. Enumeration: 'standby': 2, 'unknown': 256, 'partnerStandby': 5, 'ssi': 8, 'localPrimary': 6, 'dualFabric': 7, 'mixed': 1, 'partner': 3, 'partnerProxy': 4.
                   pset 1.3.6.1.4.1.789.1.17.19
                         psetTable 1.3.6.1.4.1.789.1.17.19.1 no-access
Provide a report of portset general information
                             psetEntry 1.3.6.1.4.1.789.1.17.19.1.1 no-access
Provide a report of portset information
                                 psetIndex 1.3.6.1.4.1.789.1.17.19.1.1.1 integer32 read-only
A number that identifies a specific port set.
                                 psetName 1.3.6.1.4.1.789.1.17.19.1.1.2 displaystring read-only
The name of the port set
                                 psetType 1.3.6.1.4.1.789.1.17.19.1.1.3 integer read-only
Type of this port set, either iSCSI or FCP Enumeration: 'fcp': 1, 'iSCSI': 2.
                         psetMemberTable 1.3.6.1.4.1.789.1.17.19.2 no-access
Table of individual Port names in each Port set
                             psetMemberEntry 1.3.6.1.4.1.789.1.17.19.2.1 no-access
Provide a report of portset port information
                                 psetMemberIndex 1.3.6.1.4.1.789.1.17.19.2.1.1 integer32 read-only
A number that identifies a specific port set.
                                 psetMemberNameIndex 1.3.6.1.4.1.789.1.17.19.2.1.2 integer32 read-only
A number the identifies the port in the set.
                                 psetPortName 1.3.6.1.4.1.789.1.17.19.2.1.3 displaystring read-only
A textual name for this port.
                   fcp64ReadBytes 1.3.6.1.4.1.789.1.17.20 counter64 read-only
The total number of bytes read via FCP since the last boot. This object returns all of the 64 bit unsigned integer.
                   fcp64WriteBytes 1.3.6.1.4.1.789.1.17.21 counter64 read-only
The total number of bytes written via FCP since the last boot. This object returns all of the 64 bit unsigned integer.
                   iscsi64ReadBytes 1.3.6.1.4.1.789.1.17.22 counter64 read-only
The total number of bytes read via iSCSI since the last boot. This object returns all of the 64 bit unsigned integer.
                   iscsi64WriteBytes 1.3.6.1.4.1.789.1.17.23 counter64 read-only
The total number of bytes written via iSCSI since the last boot. This object returns all of the 64 bit unsigned integer.
                   iscsi64Ops 1.3.6.1.4.1.789.1.17.24 counter64 read-only
The total number of iSCSI ops handled since the last boot. This object returns all of the 64 bit unsigned integer.
                   fcp64Ops 1.3.6.1.4.1.789.1.17.25 counter64 read-only
The total number of FCP ops handled since the last boot. This object returns all of the 64 bit unsigned integer.
             nfscache 1.3.6.1.4.1.789.1.18
                   nfsCacheOptions 1.3.6.1.4.1.789.1.18.1
                       nfsCacheIsEnabled 1.3.6.1.4.1.789.1.18.1.1 integer read-only
Whether NFS caching is enabled on this system. Enumeration: 'true': 2, 'false': 1.
                       nfsCacheIsLicensed 1.3.6.1.4.1.789.1.18.1.2 integer read-only
Whether NFS caching is licensed on this system. Enumeration: 'true': 2, 'false': 1.
                   nfsCacheStats 1.3.6.1.4.1.789.1.18.2
                       nfsCacheBytesFromClients 1.3.6.1.4.1.789.1.18.2.1 counter32 read-only
Total NFS bytes received from clients
                       nfsCacheBytesToClients 1.3.6.1.4.1.789.1.18.2.2 counter32 read-only
Total NFS bytes sent to clients
                       nfsCacheBytesFromServers 1.3.6.1.4.1.789.1.18.2.3 counter32 read-only
Total NFS bytes received from servers
                       nfsCacheBytesToServers 1.3.6.1.4.1.789.1.18.2.4 counter32 read-only
Total NFS bytes sent to servers
                       nfsCacheTotalRequests 1.3.6.1.4.1.789.1.18.2.5 counter32 read-only
Total NFS requests received
                       nfsCacheHitRequests 1.3.6.1.4.1.789.1.18.2.6 counter32 read-only
Total NFS requests resulting in cache hits
                       nfsCacheMissRequests 1.3.6.1.4.1.789.1.18.2.7 counter32 read-only
Total NFS requests resulting in cache misses
                       nfsCacheMissCacheableRequests 1.3.6.1.4.1.789.1.18.2.8 counter32 read-only
Total NFS requests that were cacheable misses
                       nfsCacheMissUnCacheableRequests 1.3.6.1.4.1.789.1.18.2.9 counter32 read-only
Total NFS requests that were uncacheable misses
                       nfsCacheEjectRequests 1.3.6.1.4.1.789.1.18.2.10 counter32 read-only
Total NFS requests resulting in object eject due to expiration
                       nfsCacheVerifyRequests 1.3.6.1.4.1.789.1.18.2.11 counter32 read-only
Total NFS requests resulting in object verification
                       nfsCacheRpcRecords 1.3.6.1.4.1.789.1.18.2.12 counter32 read-only
Total RPC records received
                       nfsCacheBWSavings 1.3.6.1.4.1.789.1.18.2.13 integer32 read-only
Bandwidth savings for NFS requests
                       nfsCacheHighBytesFromClients 1.3.6.1.4.1.789.1.18.2.14 counter32 read-only
Total NFS bytes received from clients. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                       nfsCacheLowBytesFromClients 1.3.6.1.4.1.789.1.18.2.15 counter32 read-only
Total NFS bytes received from clients. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                       nfsCacheHighBytesToClients 1.3.6.1.4.1.789.1.18.2.16 counter32 read-only
Total NFS bytes sent to clients. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                       nfsCacheLowBytesToClients 1.3.6.1.4.1.789.1.18.2.17 counter32 read-only
Total NFS bytes sent to clients. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                       nfsCacheHighBytesFromServers 1.3.6.1.4.1.789.1.18.2.18 counter32 read-only
Total NFS bytes received from servers. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                       nfsCacheLowBytesFromServers 1.3.6.1.4.1.789.1.18.2.19 counter32 read-only
Total NFS bytes received from servers. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                       nfsCacheHighBytesToServers 1.3.6.1.4.1.789.1.18.2.20 counter32 read-only
Total NFS bytes sent to servers. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                       nfsCacheLowBytesToServers 1.3.6.1.4.1.789.1.18.2.21 counter32 read-only
Total NFS bytes sent to servers. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                       nfsCacheHighTotalRequests 1.3.6.1.4.1.789.1.18.2.22 counter32 read-only
Total NFS requests received. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                       nfsCacheLowTotalRequests 1.3.6.1.4.1.789.1.18.2.23 counter32 read-only
Total NFS requests received. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                       nfsCacheHighHitRequests 1.3.6.1.4.1.789.1.18.2.24 counter32 read-only
Total NFS requests resulting in cache hits. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                       nfsCacheLowHitRequests 1.3.6.1.4.1.789.1.18.2.25 counter32 read-only
Total NFS requests resulting in cache hits. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                       nfsCacheHighMissRequests 1.3.6.1.4.1.789.1.18.2.26 counter32 read-only
Total NFS requests resulting in cache misses. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                       nfsCacheLowMissRequests 1.3.6.1.4.1.789.1.18.2.27 counter32 read-only
Total NFS requests resulting in cache misses. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                       nfsCache64BytesFromClients 1.3.6.1.4.1.789.1.18.2.28 counter64 read-only
Total NFS bytes received from clients. This object returns all of the 64 bit unsigned integer.
                       nfsCache64BytesToClients 1.3.6.1.4.1.789.1.18.2.29 counter64 read-only
Total NFS bytes sent to clients. This object returns all of the 64 bit unsigned integer.
                       nfsCache64BytesFromServers 1.3.6.1.4.1.789.1.18.2.30 counter64 read-only
Total NFS bytes received from servers. This object returns all of the 64 bit unsigned integer.
                       nfsCache64BytesToServers 1.3.6.1.4.1.789.1.18.2.31 counter64 read-only
Total NFS bytes sent to servers. This object returns all of the 64 bit unsigned integer.
                       nfsCache64TotalRequests 1.3.6.1.4.1.789.1.18.2.32 counter64 read-only
Total NFS requests received. This object returns all of the 64 bit unsigned integer.
                       nfsCache64HitRequests 1.3.6.1.4.1.789.1.18.2.33 counter64 read-only
Total NFS requests resulting in cache hits. This object returns all of the 64 bit unsigned integer.
                       nfsCache64MissRequests 1.3.6.1.4.1.789.1.18.2.34 counter64 read-only
Total NFS requests resulting in cache misses. This object returns all of the 64 bit unsigned integer.
             snapvault 1.3.6.1.4.1.789.1.19
                   svOn 1.3.6.1.4.1.789.1.19.1 integer read-only
Indicates whether snapvault has been turned on or not. Enumeration: 'on': 2, 'off': 1.
                   svSystemActiveDstNumber 1.3.6.1.4.1.789.1.19.2 integer32 read-only
Number of active snapvault destionations.
                   svSystemActiveSrcNumber 1.3.6.1.4.1.789.1.19.3 integer32 read-only
Number of active snapvault sources.
                   svSystemTotalPrimarySuccesses 1.3.6.1.4.1.789.1.19.4 counter32 read-only
Total number of successful snapvault transfers from the snapvault primary. Persistent across reboot.
                   svSystemTotalSecondarySuccesses 1.3.6.1.4.1.789.1.19.5 counter32 read-only
Total number of successful snapvault transfers to the snapvault secondary. Persistent across reboot.
                   svSystemTotalPrimaryFailures 1.3.6.1.4.1.789.1.19.6 counter32 read-only
Total number of failed snapvault transfers on the snapvault primary. Persistent across reboot.
                   svSystemTotalSecondaryFailures 1.3.6.1.4.1.789.1.19.7 counter32 read-only
Total number of failed snapvault transfers on the snapvault secondary. Persistent across reboot.
                   svSystemTotalSecondaryDeferments 1.3.6.1.4.1.789.1.19.8 counter32 read-only
Total number of deferred snapvault transfers on the snapvault secondary. Persistent across reboot.
                   svPrimaryIsLicensed 1.3.6.1.4.1.789.1.19.9 integer read-only
Whether the snapvault_client(primary) is licensed on the filer. Enumeration: 'true': 2, 'false': 1.
                   svSecondaryIsLicensed 1.3.6.1.4.1.789.1.19.10 integer read-only
Whether the snapvault_server(secondary) is licensed on the filer. Enumeration: 'true': 2, 'false': 1.
                   snapvaultStatusTable 1.3.6.1.4.1.789.1.19.11 no-access
provide a list of snapvault status.
                         snapvaultStatusEntry 1.3.6.1.4.1.789.1.19.11.1 no-access
Provide a report of current status of snapvault.
                             svIndex 1.3.6.1.4.1.789.1.19.11.1.1 integer32 read-only
Index into the snapvault status table.
                             svSrc 1.3.6.1.4.1.789.1.19.11.1.2 octet string read-only
Source of the snapvault relationship. :/vol/
                             svDst 1.3.6.1.4.1.789.1.19.11.1.3 octet string read-only
Destionation of the snapvault relationship. :/vol/
                             svStatus 1.3.6.1.4.1.789.1.19.11.1.4 integer read-only
Current transfer status of the snapvault relationship. Enumeration: 'aborting': 4, 'transferring': 2, 'paused': 12, 'idle': 1, 'resyncing': 7, 'quiescing': 6, 'pending': 3.
                             svState 1.3.6.1.4.1.789.1.19.11.1.5 integer read-only
Current state of the snapvault relationship. Enumeration: 'uninitialized': 1, 'quiesced': 4, 'brokenOff': 3, 'unknown': 6, 'snapvaulted': 2, 'source': 5, 'restoring': 7.
                             svLag 1.3.6.1.4.1.789.1.19.11.1.6 timeticks read-only
How far behind from the source the destination is.
                             svTotalSuccesses 1.3.6.1.4.1.789.1.19.11.1.7 counter32 read-only
Total number of successful transfer since the snapvault relationship was established. Persistent across reboot.
                             svTotalRestartSuccesses 1.3.6.1.4.1.789.1.19.11.1.8 counter32 read-only
Total number of successful restarted transfer since the snapvault relationship was established. Persistent across reboot.
                             svTotalFailures 1.3.6.1.4.1.789.1.19.11.1.9 counter32 read-only
Total number of failed or aborted transfer since the snapvault relationship was established. Persistent across reboot.
                             svTotalDeferments 1.3.6.1.4.1.789.1.19.11.1.10 counter32 read-only
Total number of deferment since the snapvault relationship was established. Persistent across reboot.
                             svTotalTransMBs 1.3.6.1.4.1.789.1.19.11.1.11 counter32 read-only
Total transfer size in MB for the snapvault. Reset on reboot.
                             svTotalTransTimeSeconds 1.3.6.1.4.1.789.1.19.11.1.12 counter32 read-only
Total number of seconds spent in successful transfer for the snapvault relationship. Reset on reboot.
                             svThrottleValue 1.3.6.1.4.1.789.1.19.11.1.13 integer32 read-only
Current throttle value for the snapvault relationship.
                             svSrcSnapshotTime 1.3.6.1.4.1.789.1.19.11.1.14 integer32 read-only
Time when the source snapshot was created. The time in seconds since January 1, 1970. The source snapshot here is the last snapshot successfully transferred from the source to the destination.
                             svBaseSnapshot 1.3.6.1.4.1.789.1.19.11.1.15 displaystring read-only
The name of the current base snapshot for the snapvault relationship.
                             svLastTransType 1.3.6.1.4.1.789.1.19.11.1.16 displaystring read-only
The type of the previous successful transfer.
                             svLastTransMBs 1.3.6.1.4.1.789.1.19.11.1.17 integer32 read-only
Last successful transfer size in MB for the snapvault relationship.
                             svLastTransTimeSeconds 1.3.6.1.4.1.789.1.19.11.1.18 integer32 read-only
Duration of last successful transfer in seconds for the snapvault relationship.
                   snapvaultHostTable 1.3.6.1.4.1.789.1.19.12 no-access
Provide a list of remote snapvault hosts.
                         snapvaultHostEntry 1.3.6.1.4.1.789.1.19.12.1 no-access
Provide snapvault statistics for a remote host which has one or more current established relationships with the local snapvault system.
                             svHostIndex 1.3.6.1.4.1.789.1.19.12.1.1 integer32 read-only
Index into the snapvault remote host table.
                             svHostName 1.3.6.1.4.1.789.1.19.12.1.2 displaystring read-only
The name of the remote snapvault host.
                             svHostType 1.3.6.1.4.1.789.1.19.12.1.3 integer read-only
The type of the remote snapvault host. Enumeration: 'primary': 1, 'secondary': 2.
                             svHostTotalSuccesses 1.3.6.1.4.1.789.1.19.12.1.4 integer32 read-only
Total number of successful snapvault transfers for all current established relationships between the local snapvault system and the given remote host.
                             svHostTotalFailures 1.3.6.1.4.1.789.1.19.12.1.5 integer32 read-only
Total number of failed snapvault transfers for all current established relationships between the local snapvault system and the given remote host.
                             svHostTotalDeferments 1.3.6.1.4.1.789.1.19.12.1.6 integer32 read-only
Total number of deferred snapvault transfers for all current established relationships between the local snapvault system and the given remote host. 0 for snapvault client host.
                   snapvaultSchedTable 1.3.6.1.4.1.789.1.19.13 no-access
Provide a list of snapvault schedules.
                         snapvaultSchedEntry 1.3.6.1.4.1.789.1.19.13.1 no-access
Provide a report of schedules of snapvault.
                             svSchedIndex 1.3.6.1.4.1.789.1.19.13.1.1 integer32 read-only
Index into the snapvault schedule table.
                             svSchedVolume 1.3.6.1.4.1.789.1.19.13.1.2 displaystring read-only
The name of the volume on the snapvault for the snapvault schedule. This does not have a /vol/ prefix.
                             svSchedSnapshot 1.3.6.1.4.1.789.1.19.13.1.3 displaystring read-only
The name of the snapshot for the snapvault schedule.
                             svSchedStatus 1.3.6.1.4.1.789.1.19.13.1.4 integer read-only
Current status of the snapvault schedule. Enumeration: 'active': 3, 'idle': 1, 'aborting': 4, 'queued': 2.
                             svSchedType 1.3.6.1.4.1.789.1.19.13.1.5 integer read-only
The type of the snapvault schedule. Enumeration: 'xfer': 2, 'undef': 1, 'create': 3.
                             svSchedSchedule 1.3.6.1.4.1.789.1.19.13.1.6 displaystring read-only
The update schedule of the snapvault.
                   svDrPrimaryIsLicensed 1.3.6.1.4.1.789.1.19.14 integer read-only
Whether the snapvault disaster recovery primary is licensed on the filer. Enumeration: 'true': 2, 'false': 1.
             ftpd 1.3.6.1.4.1.789.1.20
                   ftpdOn 1.3.6.1.4.1.789.1.20.1 integer read-only
Indicates whether ftpd has been turned on or not. Enumeration: 'on': 2, 'off': 1.
                   ftpdCurrentConns 1.3.6.1.4.1.789.1.20.2 integer32 read-only
Number of currently open TCP/IP connections to ftp daemon (active and idle)
                   ftpdMaxConns 1.3.6.1.4.1.789.1.20.3 integer32 read-only
Number of maximum simultaneous TCP/IP connections to ftp daemon
                   ftpdTotalConns 1.3.6.1.4.1.789.1.20.4 integer32 read-only
Number of total TCP/IP connections to ftp daemon
             storage 1.3.6.1.4.1.789.1.21
                   enclosure 1.3.6.1.4.1.789.1.21.1
                       enclNumber 1.3.6.1.4.1.789.1.21.1.1 integer32 read-only
The number of storage enclosures in the storage subsystem.
                       enclTable 1.3.6.1.4.1.789.1.21.1.2 no-access
Display disk enclosure environmental information for fiber channel shelves and NearStore SCSI shelves. Shelves that do not support SCSI Enclosure Services, such as DEC Storage Shelf, Eurologic XL8 are not supported.
                           enclEntry 1.3.6.1.4.1.789.1.21.1.2.1 no-access
Display disk enclosure (shelf) environmental information for the referenced disk enclosure.
                               enclIndex 1.3.6.1.4.1.789.1.21.1.2.1.1 integer32 read-only
A number that identifies this enclosure among the possible monitored enclosures. This number normally uniquely identifies one shelf within one boot, but may it change between boots. The number may also change within a boot if shelves are removed and added.
                               enclContactState 1.3.6.1.4.1.789.1.21.1.2.1.2 integer read-only
The state of the communication between the filer or storage engine and the enclosure monitoring device in the enclosure. Enumeration: 'nonexistent': 6, 'inactive': 4, 'initializing': 1, 'active': 3, 'transitioning': 2, 'reconfiguring': 5.
                               enclChannelShelfAddr 1.3.6.1.4.1.789.1.21.1.2.1.3 displaystring read-only
The adapter number or switch name and the port number (together, called the channel), and shelf ID of this enclosure. Examples are 8a.1 and switch:5.1.
                               enclProductLogicalID 1.3.6.1.4.1.789.1.21.1.2.1.4 displaystring read-only
The logical identifier of this enclosure. This a form of the World-Wide Name (WWN).
                               enclProductID 1.3.6.1.4.1.789.1.21.1.2.1.5 displaystring read-only
The product ID of the shelf hardware module that provides the enclosure monitoring function. Example is LRC.
                               enclProductVendor 1.3.6.1.4.1.789.1.21.1.2.1.6 displaystring read-only
The name of the vendor of this enclosure. Example is Xyratex.
                               enclProductModel 1.3.6.1.4.1.789.1.21.1.2.1.7 displaystring read-only
The model name of this enclosure. Example is DiskShelf14.
                               enclProductRevision 1.3.6.1.4.1.789.1.21.1.2.1.8 displaystring read-only
The revision number of this enclosure.
                               enclProductSerialNo 1.3.6.1.4.1.789.1.21.1.2.1.9 displaystring read-only
The serial number of this enclosure.
                               enclNumberDiskBays 1.3.6.1.4.1.789.1.21.1.2.1.10 integer32 read-only
The number of disk bays in this enclosure.
                               enclDisksPresent 1.3.6.1.4.1.789.1.21.1.2.1.11 displaystring read-only
The list of disks present by bay number in this enclosure.
                               enclPowerSuppliesMaximum 1.3.6.1.4.1.789.1.21.1.2.1.12 integer32 read-only
The maximum number of power supplies in this enclosure.
                               enclPowerSuppliesPresent 1.3.6.1.4.1.789.1.21.1.2.1.13 displaystring read-only
The list of power supplies present in the enclosure. Numbering is from left to right in their intended location in the shelf, while facing the supplies.
                               enclPowerSuppliesSerialNos 1.3.6.1.4.1.789.1.21.1.2.1.14 displaystring read-only
The list of serial numbers of power supplies present in the enclosure. Not all shelves are able to report the power supply serial number. Communication errors may make the serial number unavailable. Numbering is from left to right in their intended location in the shelf, while facing the supplies.
                               enclPowerSuppliesFailed 1.3.6.1.4.1.789.1.21.1.2.1.15 displaystring read-only
The list of failed power supplies in this enclosure, numbered as in enclPowerSuppliesPresent.
                               enclFansMaximum 1.3.6.1.4.1.789.1.21.1.2.1.16 integer32 read-only
The maximum number of fans or fan modules monitored by this enclosure. R100/R150 shelf power supply fans are not included in this number.
                               enclFansPresent 1.3.6.1.4.1.789.1.21.1.2.1.17 displaystring read-only
The list of fans or fan modules present and for which status is known in this enclosure. Fans are numbered left-to-right as facing the fans. R100/R150 shelf power supply fans are not included in this list.
                               enclFansFailed 1.3.6.1.4.1.789.1.21.1.2.1.18 displaystring read-only
The list of failed fans or fan modules in this enclosure. Fans are numbered as described in enclFansPresent.
                               enclTempSensorsMaximum 1.3.6.1.4.1.789.1.21.1.2.1.19 integer32 read-only
The maximum number of temperature sensors monitored by this enclosure.
                               enclTempSensorsPresent 1.3.6.1.4.1.789.1.21.1.2.1.20 displaystring read-only
The list of temperature sensors present and for which status is known in this enclosure. Temperature sensors are numbered top-to-bottom and left-to-right, beginning with the front of the enclosure, then the rear, as the modules containing them are faced.
                               enclTempSensorsOverTempFail 1.3.6.1.4.1.789.1.21.1.2.1.21 displaystring read-only
The list of temperature sensors reporting overtemperature failure in this enclosure. Sensors are numbered as in TempSensorsPresent.
                               enclTempSensorsOverTempWarn 1.3.6.1.4.1.789.1.21.1.2.1.22 displaystring read-only
The list of temperature sensors reporting overtemperature warning in this enclosure. Sensors are numbered as in TempSensorsPresent.
                               enclTempSensorsUnderTempFail 1.3.6.1.4.1.789.1.21.1.2.1.23 displaystring read-only
The list of temperature sensors reporting undertemperature failure in this enclosure. Sensors are numbered as in TempSensorsPresent.
                               enclTempSensorsUnderTempWarn 1.3.6.1.4.1.789.1.21.1.2.1.24 displaystring read-only
The list of temperature sensors reporting undertemperature warning in this enclosure. Sensors are numbered as in TempSensorsPresent.
                               enclTempSensorsCurrentTemp 1.3.6.1.4.1.789.1.21.1.2.1.25 displaystring read-only
The list of temperatures reported by all temperature sensors in the enclosure, including the ambient temperature. Sensors are numbered as in TempSensorsPresent.
                               enclTempSensorsOverTempFailThr 1.3.6.1.4.1.789.1.21.1.2.1.26 displaystring read-only
The list of overtemperature failure thresholds for all temperature sensors in the enclosure. Sensors are numbered as in TempSensorsPresent.
                               enclTempSensorsOverTempWarnThr 1.3.6.1.4.1.789.1.21.1.2.1.27 displaystring read-only
The list of overtemperature warning thresholds for all temperature sensors in the enclosure. Sensors are numbered as in TempSensorsPresent.
                               enclTempSensorsUnderTempFailThr 1.3.6.1.4.1.789.1.21.1.2.1.28 displaystring read-only
The list of undertemperature failure thresholds for all temperature sensors in the enclosure. Sensors are numbered as in TempSensorsPresent.
                               enclTempSensorsUnderTempWarnThr 1.3.6.1.4.1.789.1.21.1.2.1.29 displaystring read-only
The list of undertemperature warning thresholds for all temperature sensors in the enclosure. Sensors are numbered as in TempSensorsPresent.
                               enclElectronicsMaximum 1.3.6.1.4.1.789.1.21.1.2.1.30 integer32 read-only
The number of enclosure services electronics modules that it is possible for this enclosure to detect and/or monitor.
                               enclElectronicsPresent 1.3.6.1.4.1.789.1.21.1.2.1.31 displaystring read-only
The list those enclosure services electronics modules present in this enclosure. Numbering is from left-to-right or top-to-bottom in their intended location in the shelf, while facing the electronics modules. It is normal for the R200 FC-AT module to be reported as the second module.
                               enclElectronicsSerialNos 1.3.6.1.4.1.789.1.21.1.2.1.32 displaystring read-only
The list of serial numbers of the enclosure services electronics modules present in this enclosure. The order follows that of enclElectronicsPresent.
                               enclElectronicsFailed 1.3.6.1.4.1.789.1.21.1.2.1.33 displaystring read-only
The list of failed electronics elements. Valid only if enclElectronicsPresent shows that some are present.
                               enclVoltSensorsMaximum 1.3.6.1.4.1.789.1.21.1.2.1.34 integer32 read-only
The number of voltage sensors monitored by this enclosure.
                               enclVoltSensorsPresent 1.3.6.1.4.1.789.1.21.1.2.1.35 displaystring read-only
The list of voltage sensors present and for which status is known in this enclosure. Voltage sensors are numbered top-to-bottom and left-to-right, beginning with the front of the enclosure, then the rear, as the modules containing them are faced.
                               enclVoltSensorsOverVoltFail 1.3.6.1.4.1.789.1.21.1.2.1.36 displaystring read-only
The list of voltage sensors reporting overvoltage failure in this enclosure. Sensors are numbered as in VoltSensorsPresent.
                               enclVoltSensorsOverVoltWarn 1.3.6.1.4.1.789.1.21.1.2.1.37 displaystring read-only
The list of voltage sensors reporting overvoltage warning in this enclosure. Sensors are numbered as in VoltSensorsPresent.
                               enclVoltSensorsUnderVoltFail 1.3.6.1.4.1.789.1.21.1.2.1.38 displaystring read-only
The list of voltage sensors reporting undervoltage failure in this enclosure. Sensors are numbered as in VoltSensorsPresent.
                               enclVoltSensorsUnderVoltWarn 1.3.6.1.4.1.789.1.21.1.2.1.39 displaystring read-only
The list of voltage sensors reporting undervoltage warning in this enclosure. Sensors are numbered as in VoltSensorsPresent.
                               enclVoltSensorsCurrentVolt 1.3.6.1.4.1.789.1.21.1.2.1.40 displaystring read-only
The list of voltages reported by all voltage sensors in the enclosure, Sensors are numbered as in VoltSensorsPresent.
                               enclVoltSensorsOverVoltFailThr 1.3.6.1.4.1.789.1.21.1.2.1.41 displaystring read-only
The list of overvoltage failure thresholds for all voltage sensors in the enclosure. Sensors are numbered as in VoltSensorsPresent.
                               enclVoltSensorsOverVoltWarnThr 1.3.6.1.4.1.789.1.21.1.2.1.42 displaystring read-only
The list of overvoltage warning thresholds for all voltage sensors in the enclosure. Sensors are numbered as in VoltSensorsPresent.
                               enclVoltSensorsUnderVoltFailThr 1.3.6.1.4.1.789.1.21.1.2.1.43 displaystring read-only
The list of undervoltage failure thresholds for all voltage sensors in the enclosure. Sensors are numbered as in VoltSensorsPresent.
                               enclVoltSensorsUnderVoltWarnThr 1.3.6.1.4.1.789.1.21.1.2.1.44 displaystring read-only
The list of undervoltage warning thresholds for all voltage sensors in the enclosure. Sensors are numbered as in VoltSensorsPresent.
                               enclCurSensorsMaximum 1.3.6.1.4.1.789.1.21.1.2.1.45 integer32 read-only
The number of current sensors monitored by this enclosure.
                               enclCurSensorsPresent 1.3.6.1.4.1.789.1.21.1.2.1.46 displaystring read-only
The list of current sensors present and for which status is known in this enclosure. Current sensors are numbered top-to-bottom and left-to-right, beginning with the front of the enclosure, then the rear, as the modules containing them are faced.
                               enclCurSensorsOverCurFail 1.3.6.1.4.1.789.1.21.1.2.1.47 displaystring read-only
The list of current sensors reporting overcurrent failure in this enclosure. Sensors are numbered as in CurSensorsPresent.
                               enclCurSensorsOverCurWarn 1.3.6.1.4.1.789.1.21.1.2.1.48 displaystring read-only
The list of current sensors reporting overcurrent warning in this enclosure. Sensors are numbered as in CurSensorsPresent.
                               enclCurSensorsCurrentCur 1.3.6.1.4.1.789.1.21.1.2.1.49 displaystring read-only
The list of currents reported by all current sensors in the enclosure, Sensors are numbered as in CurSensorsPresent.
                               enclCurSensorsOverCurFailThr 1.3.6.1.4.1.789.1.21.1.2.1.50 displaystring read-only
The list of overcurrent failure thresholds for all current sensors in the enclosure. Sensors are numbered as in CurSensorsPresent.
                               enclCurSensorsOverCurWarnThr 1.3.6.1.4.1.789.1.21.1.2.1.51 displaystring read-only
The list of overcurrent warning thresholds for all current sensors in the enclosure. Sensors are numbered as in CurSensorsPresent.
             network 1.3.6.1.4.1.789.1.22
                   netInterfaces 1.3.6.1.4.1.789.1.22.1
                       netifNumber 1.3.6.1.4.1.789.1.22.1.1 integer32 read-only
The number of network interfaces (regardless of their current state) present on this system.
                       netifTable 1.3.6.1.4.1.789.1.22.1.2 no-access
A list of interface entries. The number of entries is given by the value of netifNumber.
                           netifEntry 1.3.6.1.4.1.789.1.22.1.2.1 no-access
An interface entry containing objects at the subnetwork layer and below for a particular interface.
                               netifIndex 1.3.6.1.4.1.789.1.22.1.2.1.1 integer32 read-only
A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
                               netifDescr 1.3.6.1.4.1.789.1.22.1.2.1.2 displaystring read-only
A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the hardware interface.
                               ifHighInOctets 1.3.6.1.4.1.789.1.22.1.2.1.3 counter32 read-only
The total number of octets received on the interface, including framing characters. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                               ifLowInOctets 1.3.6.1.4.1.789.1.22.1.2.1.4 counter32 read-only
The total number of octets received on the interface, including framing characters. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                               ifHighInUcastPkts 1.3.6.1.4.1.789.1.22.1.2.1.5 counter32 read-only
The number of subnetwork-unicast packets delivered to a higher-layer protocol. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                               ifLowInUcastPkts 1.3.6.1.4.1.789.1.22.1.2.1.6 counter32 read-only
The number of subnetwork-unicast packets delivered to a higher-layer protocol. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                               ifHighInNUcastPkts 1.3.6.1.4.1.789.1.22.1.2.1.7 counter32 read-only
The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                               ifLowInNUcastPkts 1.3.6.1.4.1.789.1.22.1.2.1.8 counter32 read-only
The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                               ifHighInDiscards 1.3.6.1.4.1.789.1.22.1.2.1.9 counter32 read-only
The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                               ifLowInDiscards 1.3.6.1.4.1.789.1.22.1.2.1.10 counter32 read-only
The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                               ifHighInErrors 1.3.6.1.4.1.789.1.22.1.2.1.11 counter32 read-only
The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                               ifLowInErrors 1.3.6.1.4.1.789.1.22.1.2.1.12 counter32 read-only
The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                               ifHighInUnknownProtos 1.3.6.1.4.1.789.1.22.1.2.1.13 counter32 read-only
The number of packets received via the interface which were discarded because of an unknown or unsupported protocol. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                               ifLowInUnknownProtos 1.3.6.1.4.1.789.1.22.1.2.1.14 counter32 read-only
The number of packets received via the interface which were discarded because of an unknown or unsupported protocol. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                               ifHighOutOctets 1.3.6.1.4.1.789.1.22.1.2.1.15 counter32 read-only
The total number of octets transmitted out of the interface, including framing characters. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                               ifLowOutOctets 1.3.6.1.4.1.789.1.22.1.2.1.16 counter32 read-only
The total number of octets transmitted out of the interface, including framing characters. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                               ifHighOutUcastPkts 1.3.6.1.4.1.789.1.22.1.2.1.17 counter32 read-only
The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                               ifLowOutUcastPkts 1.3.6.1.4.1.789.1.22.1.2.1.18 counter32 read-only
The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                               ifHighOutNUcastPkts 1.3.6.1.4.1.789.1.22.1.2.1.19 counter32 read-only
The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                               ifLowOutNUcastPkts 1.3.6.1.4.1.789.1.22.1.2.1.20 counter32 read-only
The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                               ifHighOutDiscards 1.3.6.1.4.1.789.1.22.1.2.1.21 counter32 read-only
The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                               ifLowOutDiscards 1.3.6.1.4.1.789.1.22.1.2.1.22 counter32 read-only
The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                               ifHighOutErrors 1.3.6.1.4.1.789.1.22.1.2.1.23 counter32 read-only
The number of outbound packets that could not be transmitted because of errors. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                               ifLowOutErrors 1.3.6.1.4.1.789.1.22.1.2.1.24 counter32 read-only
The number of outbound packets that could not be transmitted because of errors. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                               if64InOctets 1.3.6.1.4.1.789.1.22.1.2.1.25 counter64 read-only
The total number of octets received on the interface, including framing characters. This object returns all of the 64 bit unsigned integer.
                               if64InUcastPkts 1.3.6.1.4.1.789.1.22.1.2.1.26 counter64 read-only
The number of subnetwork-unicast packets delivered to a higher-layer protocol. This object returns all of the 64 bit unsigned integer.
                               if64InNUcastPkts 1.3.6.1.4.1.789.1.22.1.2.1.27 counter64 read-only
The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. This object returns all of the 64 bit unsigned integer.
                               if64InDiscards 1.3.6.1.4.1.789.1.22.1.2.1.28 counter64 read-only
The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. This object returns all of the 64 bit unsigned integer.
                               if64InErrors 1.3.6.1.4.1.789.1.22.1.2.1.29 counter64 read-only
The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. This object returns all of the 64 bit unsigned integer.
                               if64InUnknownProtos 1.3.6.1.4.1.789.1.22.1.2.1.30 counter64 read-only
The number of packets received via the interface which were discarded because of an unknown or unsupported protocol. This object returns all of the 64 bit unsigned integer.
                               if64OutOctets 1.3.6.1.4.1.789.1.22.1.2.1.31 counter64 read-only
The total number of octets transmitted out of the interface, including framing characters. This object returns all of the 64 bit unsigned integer.
                               if64OutUcastPkts 1.3.6.1.4.1.789.1.22.1.2.1.32 counter64 read-only
The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent. This object returns all of the 64 bit unsigned integer.
                               if64OutNUcastPkts 1.3.6.1.4.1.789.1.22.1.2.1.33 counter64 read-only
The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent. This object returns all of the 64 bit unsigned integer.
                               if64OutDiscards 1.3.6.1.4.1.789.1.22.1.2.1.34 counter64 read-only
The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. This object returns all of the 64 bit unsigned integer.
                               if64OutErrors 1.3.6.1.4.1.789.1.22.1.2.1.35 counter64 read-only
The number of outbound packets that could not be transmitted because of errors. This object returns all of the 64 bit unsigned integer.
             sis 1.3.6.1.4.1.789.1.23
                   sisIsLicensed 1.3.6.1.4.1.789.1.23.1 integer read-only
Indicates whether Advanced SIS is licensed on the filer. Enumeration: 'true': 2, 'false': 1.
                   sisTable 1.3.6.1.4.1.789.1.23.2 no-access
Provide a list of the SIS volumes on the system.
                       sisEntry 1.3.6.1.4.1.789.1.23.2.1 no-access
Provide details about a particular SIS volume.
                           sisIndex 1.3.6.1.4.1.789.1.23.2.1.1 integer32 read-only
A number that identifies this entry for the SIS volume.
                           sisPath 1.3.6.1.4.1.789.1.23.2.1.2 displaystring read-only
The path to the SIS volume.
                           sisState 1.3.6.1.4.1.789.1.23.2.1.3 integer read-only
Indicates whether SIS is enabled on the volume or not. Enumeration: 'disabled': 1, 'enabled': 2.
                           sisStatus 1.3.6.1.4.1.789.1.23.2.1.4 integer read-only
Current status of the SIS volume. Enumeration: 'active': 2, 'undoing': 3, 'idle': 1, 'pending': 4.
                           sisProgress 1.3.6.1.4.1.789.1.23.2.1.5 displaystring read-only
The progress of the current SIS operation.
                           sisType 1.3.6.1.4.1.789.1.23.2.1.6 integer read-only
Indicates whether it is a regular or snapvaulted SIS volume. Enumeration: 'snapvault': 2, 'regular': 1.
                           sisSchedule 1.3.6.1.4.1.789.1.23.2.1.7 displaystring read-only
The schedule for the SIS opertions.
                           sisLastOpBeginTime 1.3.6.1.4.1.789.1.23.2.1.8 displaystring read-only
The starting time of the last completed SIS opertion.
                           sisLastOpEndTime 1.3.6.1.4.1.789.1.23.2.1.9 displaystring read-only
The ending time of the last completed SIS operation.
                           sisHighLastOpSize 1.3.6.1.4.1.789.1.23.2.1.10 integer32 read-only
The total amount of data in KBytes that the last completed SIS operation had processed. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                           sisLowLastOpSize 1.3.6.1.4.1.789.1.23.2.1.11 integer32 read-only
The total amount of data in KBytes that the last completed SIS operation had processed. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                           sisLastOpError 1.3.6.1.4.1.789.1.23.2.1.12 displaystring read-only
The error that the last SIS operation encountered if it failed.
                           sis64LastOpSize 1.3.6.1.4.1.789.1.23.2.1.13 counter64 read-only
The total amount of data in KBytes that the last completed SIS operation had processed. This object returns all of the 64 bit unsigned integer.
             compress 1.3.6.1.4.1.789.1.24
                   compressIsLicensed 1.3.6.1.4.1.789.1.24.1 integer read-only
Indicates whether compression is licensed on the filer. Enumeration: 'true': 2, 'false': 1.
                   compressTable 1.3.6.1.4.1.789.1.24.2 no-access
Provide a report of the total space used as well as the space saved by compression on volumes.
                       compressEntry 1.3.6.1.4.1.789.1.24.2.1 no-access
Provide a report of the total space used as well as the space saved by compression on the referenced file system.
                           compressIndex 1.3.6.1.4.1.789.1.24.2.1.1 integer32 read-only
A number that identifies this entry for the referenced file system.
                           compressFileSys 1.3.6.1.4.1.789.1.24.2.1.2 displaystring read-only
The name for the referenced file system.
                           compressHighUsedKBytes 1.3.6.1.4.1.789.1.24.2.1.3 counter32 read-only
The total disk space in KBytes that is in use on the referenced file system. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                           compressLowUsedKBytes 1.3.6.1.4.1.789.1.24.2.1.4 counter32 read-only
The total disk space in KBytes that is in use on the referenced file system. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                           compress64UsedKBytes 1.3.6.1.4.1.789.1.24.2.1.5 counter64 read-only
The total disk space in KBytes that is in use on the referenced file system. This object returns all of the 64 bit unsigned integer.
                           compressHighSavedKBytes 1.3.6.1.4.1.789.1.24.2.1.6 counter32 read-only
The disk space in KBytes of disk space that is saved by compression on the referenced file system. This object returns the most significant 32 bits of the 64 bit unsigned integer.
                           compressLowSavedKBytes 1.3.6.1.4.1.789.1.24.2.1.7 counter32 read-only
The disk space in KBytes of disk space that is saved by compression on the referenced filesystem. This object returns the least significant 32 bits of the 64 bit unsigned integer.
                           compress64SavedKBytes 1.3.6.1.4.1.789.1.24.2.1.8 counter64 read-only
The disk space in KBytes of disk space that is saved by compression on the referenced filesystem. This object returns all of the 64 bit unsigned integer.
                           compressPercentSaved 1.3.6.1.4.1.789.1.24.2.1.9 integer read-only
The percentage of disk space saved by compression on the referenced filesystem.
         netappProducts 1.3.6.1.4.1.789.2
             netappFiler 1.3.6.1.4.1.789.2.1
             netappNetCache 1.3.6.1.4.1.789.2.2
             netappClusteredFiler 1.3.6.1.4.1.789.2.3
             netappNode 1.3.6.1.4.1.789.2.4
         netappDataFabricManager 1.3.6.1.4.1.789.3
         netappSupportConsole 1.3.6.1.4.1.789.4
 netappModuleId 1.3.6.1.6.3.789
The mib module for netapp SNMPv2 entities