NETGEAR-ROUTING-MIB: View SNMP OID List / Download MIB

VENDOR: NETGEAR


 Home MIB: NETGEAR-ROUTING-MIB
Download as:   
SNMPv2-CONF, OSPF-MIB, SNMPv2-SMI, NETGEAR-REF-MIB, SNMPv2-TC, RIPv2-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 agentRouting 1.3.6.1.4.1.4526.10.2
The NETGEAR Private MIB for Routing
     agentSwitchArpGroup 1.3.6.1.4.1.4526.10.2.1
         agentSwitchArpAgeoutTime 1.3.6.1.4.1.4526.10.2.1.1 integer32 read-write
Configures the ARP entry ageout time in seconds. Allowable range: 15-21600
         agentSwitchArpResponseTime 1.3.6.1.4.1.4526.10.2.1.2 integer32 read-write
Configures the ARP request response timeout in seconds. Allowable range: 1-10
         agentSwitchArpMaxRetries 1.3.6.1.4.1.4526.10.2.1.3 integer32 read-write
Configures the ARP count of maximum request for retries. Allowable range: 0-10
         agentSwitchArpCacheSize 1.3.6.1.4.1.4526.10.2.1.4 integer32 read-write
Configures the ARP maximum number of entries in the cache. Allowable range is platform-specific.
         agentSwitchArpDynamicRenew 1.3.6.1.4.1.4526.10.2.1.5 integer read-write
This indicates the current setting of ARP dynamic renew mode. Enumeration: 'enable': 1, 'disable': 2.
         agentSwitchArpTotalEntryCountCurrent 1.3.6.1.4.1.4526.10.2.1.6 gauge32 read-only
Current number of entries in the ARP cache.
         agentSwitchArpTotalEntryCountPeak 1.3.6.1.4.1.4526.10.2.1.7 gauge32 read-only
Peak number of entries recorded in the ARP cache over time. This value is restarted whenever the ARP cache size is changed.
         agentSwitchArpStaticEntryCountCurrent 1.3.6.1.4.1.4526.10.2.1.8 gauge32 read-only
Current number of configured static ARP entries.
         agentSwitchArpStaticEntryCountMax 1.3.6.1.4.1.4526.10.2.1.9 integer32 read-only
Maximum number of configurable static ARP entries.
         agentSwitchArpTable 1.3.6.1.4.1.4526.10.2.1.10 no-access
This table augments the MIB-II ipNetToMediaTable by providing per-interface ARP entry information.
               agentSwitchArpEntry 1.3.6.1.4.1.4526.10.2.1.10.1 no-access
                   agentSwitchArpAge 1.3.6.1.4.1.4526.10.2.1.10.1.1 timeticks read-only
This defines the time (in seconds) since the ARP entry was last refreshed. This value is 0 for ARP entries of type local(1) or static(3), since these entries are not subject to aging.
                   agentSwitchArpIpAddress 1.3.6.1.4.1.4526.10.2.1.10.1.2 ipaddress read-only
The IP Address assigned to each interface.
                   agentSwitchArpMacAddress 1.3.6.1.4.1.4526.10.2.1.10.1.3 physaddress read-only
The hardware MAX Address that each interface maps to.
                   agentSwitchArpInterface 1.3.6.1.4.1.4526.10.2.1.10.1.4 integer32 read-only
The Associated IfIndex which identified the ARP Entry.
                   agentSwitchArpType 1.3.6.1.4.1.4526.10.2.1.10.1.5 integer read-only
The type of ARP entry. Enumeration: 'local': 1, 'static': 3, 'gateway': 2, 'dynamic': 4.
                   agentSwitchArpStatus 1.3.6.1.4.1.4526.10.2.1.10.1.6 rowstatus read-write
The status of this ARP entry. Setting this object destroy will remove the entry.
     agentSwitchIpGroup 1.3.6.1.4.1.4526.10.2.2
         agentSwitchIpRoutingMode 1.3.6.1.4.1.4526.10.2.2.1 integer read-write
Administratively enables/disables routing on the switch. Enumeration: 'enable': 1, 'disable': 2.
         agentSwitchIpInterfaceTable 1.3.6.1.4.1.4526.10.2.2.3 no-access
             agentSwitchIpInterfaceEntry 1.3.6.1.4.1.4526.10.2.2.3.1 no-access
                 agentSwitchIpInterfaceIfIndex 1.3.6.1.4.1.4526.10.2.2.3.1.1 integer32 read-only
The IfIndex associated with this instance.
                 agentSwitchIpInterfaceIpAddress 1.3.6.1.4.1.4526.10.2.2.3.1.2 ipaddress read-write
The IpAddress assigned to this interface. When setting this value, the value of agentSwitchIpInterfaceNetMask must be set at the same time.
                 agentSwitchIpInterfaceNetMask 1.3.6.1.4.1.4526.10.2.2.3.1.3 ipaddress read-write
The NetMask assigned to this interface. When setting this value, the value of agentSwitchIpInterfaceIpAddress must be set at the same time.
                 agentSwitchIpInterfaceClearIp 1.3.6.1.4.1.4526.10.2.2.3.1.4 integer read-write
Sets the interfaces IpAddress and NetMask back to 0.0.0.0 Enumeration: 'enable': 1, 'disable': 2.
                 agentSwitchIpInterfaceRoutingMode 1.3.6.1.4.1.4526.10.2.2.3.1.5 integer read-write
Enables or disables routing for this interface. Enumeration: 'enable': 1, 'disable': 2.
                 agentSwitchIpInterfaceProxyARPMode 1.3.6.1.4.1.4526.10.2.2.3.1.6 integer read-write
Enables or disables Proxy ARP for this interface. Enumeration: 'enable': 1, 'disable': 2.
                 agentSwitchIpInterfaceMtuValue 1.3.6.1.4.1.4526.10.2.2.3.1.7 unsigned32 read-write
Configures the MTU value for this interface. If the value returned is 0 this interface is not enabled for routing. It is not valid to set this value to 0 if routing is enabled.
         agentSwitchIpRouterDiscoveryTable 1.3.6.1.4.1.4526.10.2.2.4 no-access
There is no global administrative flag for router discovery. The global routing flag (agentSwitchIpRoutingMode) will be used for this purpose. If routing is disabled, router discovery is disabled as well.
             agentSwitchIpRouterDiscoveryEntry 1.3.6.1.4.1.4526.10.2.2.4.1 no-access
                 agentSwitchIpRouterDiscoveryIfIndex 1.3.6.1.4.1.4526.10.2.2.4.1.1 integer32 read-only
Interface Number to configure Router Discovery on.
                 agentSwitchIpRouterDiscoveryAdvertiseMode 1.3.6.1.4.1.4526.10.2.2.4.1.2 integer read-write
Enable or disable router discovery on the interface. Enumeration: 'enable': 1, 'disable': 2.
                 agentSwitchIpRouterDiscoveryMaxAdvertisementInterval 1.3.6.1.4.1.4526.10.2.2.4.1.3 integer32 read-write
Maximum time allowed between sending router advertisements from the interface.
                 agentSwitchIpRouterDiscoveryMinAdvertisementInterval 1.3.6.1.4.1.4526.10.2.2.4.1.4 integer32 read-write
Minimum time allowed between sending router advertisements from the interface. This value must be less than or equal to agentSwitchIpRouterDiscoveryMaxAdvertisementInterval.
                 agentSwitchIpRouterDiscoveryAdvertisementLifetime 1.3.6.1.4.1.4526.10.2.2.4.1.5 integer32 read-write
Value of lifetime field of router advertsisement sent from the interface. This value must be greater than or equal to agentSwitchIpRouterDiscoveryMaxAdvertisementInterval.
                 agentSwitchIpRouterDiscoveryPreferenceLevel 1.3.6.1.4.1.4526.10.2.2.4.1.6 integer32 read-write
Preferability of the address as a default router address, related to other addresses on the same subnet. This is defined as the larger the number, the higher the preference.
                 agentSwitchIpRouterDiscoveryAdvertisementAddress 1.3.6.1.4.1.4526.10.2.2.4.1.7 ipaddress read-write
Address used when sending router advertisements from the interface.
         agentSwitchIpVlanTable 1.3.6.1.4.1.4526.10.2.2.5 no-access
             agentSwitchIpVlanEntry 1.3.6.1.4.1.4526.10.2.2.5.1 no-access
A Static VLAN for which routing can be enabled/disabled
                 agentSwitchIpVlanId 1.3.6.1.4.1.4526.10.2.2.5.1.1 integer32 read-only
The Vlan's Id.
                 agentSwitchIpVlanIfIndex 1.3.6.1.4.1.4526.10.2.2.5.1.2 integer32 read-only
The IfIndex associated with this VLAN.
                 agentSwitchIpVlanRoutingStatus 1.3.6.1.4.1.4526.10.2.2.5.1.3 rowstatus read-only
Status of Routing mode per Vlan. active(1) - Vlan is enabled for routing createAndGo(4) - Adds Vlan entry for routing destroy(6) - Removes Vlan from routing
         agentSwitchSecondaryAddressTable 1.3.6.1.4.1.4526.10.2.2.6 no-access
Contains a list of secondary IP Addresses associated with an interface.
             agentSwitchSecondaryAddressEntry 1.3.6.1.4.1.4526.10.2.2.6.1 no-access
A secondary IP Address for a given interface. This IP Address must not conflict with the IP Address configured in the agentSwitchIpInterfaceTable.
                 agentSwitchSecondaryIpAddress 1.3.6.1.4.1.4526.10.2.2.6.1.1 ipaddress no-access
The Secondary IP Address assigned to this interface.
                 agentSwitchSecondaryNetMask 1.3.6.1.4.1.4526.10.2.2.6.1.2 ipaddress read-only
The Secondary Net Mask assigned to this interface. This value must be set during creation, and can not be changed.
                 agentSwitchSecondaryStatus 1.3.6.1.4.1.4526.10.2.2.6.1.3 rowstatus read-only
Creates a new entry in the Secondary Address table. Allowed values are: createAndGo(4) - Creates an entry in this table, associating the address with a given interface. The agentSwitchSecondaryNetMask object must be set during creation. destroy(6) - Removes the associated address from the interface.
     agentRouterRipConfigGroup 1.3.6.1.4.1.4526.10.2.3
         agentRouterRipAdminState 1.3.6.1.4.1.4526.10.2.3.1 integer read-write
Sets the administrative mode of RIP in the router. Enumeration: 'enable': 1, 'disable': 2.
         agentRouterRipSplitHorizonMode 1.3.6.1.4.1.4526.10.2.3.2 integer read-write
Sets the RIP split horizon operating mode in the router. A value of none(1) means split horizon processing is disabled. When set to simple(2), the simple split horizon technique is used. When set to poisonReverse(3), the split horizon with poison reverse technique is used. The default split horizon mode is simple(2). Enumeration: 'simple': 2, 'none': 1, 'poisonReverse': 3.
         agentRouterRipAutoSummaryMode 1.3.6.1.4.1.4526.10.2.3.3 integer read-write
Sets the RIP auto summarization mode in the router. A value of enable(1) means that routes advertized by this RIP router are combined, or summarized, whenever possible into aggregates. When set to disable(2), routes are not aggregated in RIP updates generated by this router. The default auto summary mode is enable(1). Enumeration: 'enable': 1, 'disable': 2.
         agentRouterRipHostRoutesAcceptMode 1.3.6.1.4.1.4526.10.2.3.4 integer read-write
Sets the RIP host route acceptance mode in the router. A value of enable(1) means that host routes advertized to this RIP router will be accepted (learned) into its routing table. When set to disable(2), host routes advertized in RIP updates from neighboring routers are ignored. The default host routes accept mode is enable(1). Enumeration: 'enable': 1, 'disable': 2.
         agentRouterRipDefaultMetric 1.3.6.1.4.1.4526.10.2.3.5 integer32 read-write
Default metric of redistributed routes, when RIP redistributes from other protocols.
         agentRouterRipDefaultMetricConfigured 1.3.6.1.4.1.4526.10.2.3.6 truthvalue read-write
Flag to determine whether RIP default-metric is configured or not.
         agentRouterRipDefaultInfoOriginate 1.3.6.1.4.1.4526.10.2.3.7 truthvalue read-write
Flag to determine, whether RIP can advertise a default-route learned from another protocol.
         agentRipRouteRedistTable 1.3.6.1.4.1.4526.10.2.3.8 no-access
This table contains the MIB objects required to configure route-redistribution for RIP. Here, RIP is the Destination protocol and the source protocols can be any of : BGP, OSPF, Static, Connected.
             agentRipRouteRedistEntry 1.3.6.1.4.1.4526.10.2.3.8.1 no-access
                 agentRipRouteRedistSource 1.3.6.1.4.1.4526.10.2.3.8.1.1 integer read-only
Source route, from which RIP can redistribute routes. This object also acts as the identifier for the RIP redistribution Table entry. Enumeration: 'bgp': 4, 'connected': 1, 'static': 2, 'ospf': 3.
                 agentRipRouteRedistMode 1.3.6.1.4.1.4526.10.2.3.8.1.2 integer read-write
User enabels/disables route-redistribution for a particular source protocol. Enumeration: 'enable': 1, 'disable': 2.
                 agentRipRouteRedistMetric 1.3.6.1.4.1.4526.10.2.3.8.1.3 integer32 read-write
Metric used for redistributing a particular source protocol route into RIP.
                 agentRipRouteRedistMetricConfigured 1.3.6.1.4.1.4526.10.2.3.8.1.4 truthvalue read-write
Flag to determine whether RIP redistribute-metric is configured or not.
                 agentRipRouteRedistMatchInternal 1.3.6.1.4.1.4526.10.2.3.8.1.5 integer read-write
If this flag is true, RIP redistributes OSPF internal routes. It will be non-applicable, when source protocol is other than ospf. Enumeration: 'true': 1, 'false': 2, 'not-applicable': 3.
                 agentRipRouteRedistMatchExternal1 1.3.6.1.4.1.4526.10.2.3.8.1.6 integer read-write
If this flag is true, RIP redistributes OSPF External1 routes. It will be non-applicable, when source protocol is other than ospf. Enumeration: 'true': 1, 'false': 2, 'not-applicable': 3.
                 agentRipRouteRedistMatchExternal2 1.3.6.1.4.1.4526.10.2.3.8.1.7 integer read-write
If this flag is true, RIP redistributes OSPF External2 routes. It will be non-applicable, when source protocol is other than ospf. Enumeration: 'true': 1, 'false': 2, 'not-applicable': 3.
                 agentRipRouteRedistMatchNSSAExternal1 1.3.6.1.4.1.4526.10.2.3.8.1.8 integer read-write
If this flag is true, RIP redistributes OSPF NSSA-External1 routes. It will be non-applicable, when source protocol is other than ospf. Enumeration: 'true': 1, 'false': 2, 'not-applicable': 3.
                 agentRipRouteRedistMatchNSSAExternal2 1.3.6.1.4.1.4526.10.2.3.8.1.9 integer read-write
If this flag is true, RIP redistributes OSPF NSSA-External2 routes. It will be non-applicable, when source protocol is other than ospf. Enumeration: 'true': 1, 'false': 2, 'not-applicable': 3.
                 agentRipRouteRedistDistList 1.3.6.1.4.1.4526.10.2.3.8.1.10 unsigned32 read-write
Access-list number of the access-list, which filters routes received from a source-protocol.
                 agentRipRouteRedistDistListConfigured 1.3.6.1.4.1.4526.10.2.3.8.1.11 truthvalue read-write
Flag to determine whether Access-list is configured or not.
         agentRip2IfConfTable 1.3.6.1.4.1.4526.10.2.3.9 no-access
A list of subnets which require separate configuration in RIP. Augments rip2IfConfTable in the RIPv2-MIB.
             agentRip2IfConfEntry 1.3.6.1.4.1.4526.10.2.3.9.1 no-access
A Single Routing Domain in a single Subnet. Augments rip2IfConfEntry in RIPv2-MIB.
                 agentRip2IfConfAuthKeyId 1.3.6.1.4.1.4526.10.2.3.9.1.1 integer read-only
The identifier for the authentication key used on this interface. This field is only meaningful when the RIPv2-MIB rip2IfConfAuthType is md5(3); otherwise, the value is not used.
     agentRouterOspfConfigGroup 1.3.6.1.4.1.4526.10.2.4
         agentOspfDefaultMetric 1.3.6.1.4.1.4526.10.2.4.1 integer32 read-write
Default metric of redistributed routes, when OSPF redistributes from other protocols.
         agentOspfDefaultMetricConfigured 1.3.6.1.4.1.4526.10.2.4.2 truthvalue read-write
Flag to determine whether OSPF default-metric is configured or not.
         agentOspfDefaultInfoOriginate 1.3.6.1.4.1.4526.10.2.4.3 truthvalue read-write
Flag to determine, whether OSPF can advertise a default-route learned from another protocol.
         agentOspfDefaultInfoOriginateAlways 1.3.6.1.4.1.4526.10.2.4.4 truthvalue read-write
When this flag is true, the router advertises 0.0.0.0/0.0.0.0 always. Without this option, OSPF will only advertise 0.0.0.0/0.0.0.0 if the router's forwarding table contains a default route.
         agentOspfDefaultInfoOriginateMetric 1.3.6.1.4.1.4526.10.2.4.5 integer32 read-write
Metric of the default route,which OSPF advertises when learned from other protocol.
         agentOspfDefaultInfoOriginateMetricConfigured 1.3.6.1.4.1.4526.10.2.4.6 truthvalue read-write
Flag to determine whether OSPF default-info originate metric is configured or not.
         agentOspfDefaultInfoOriginateMetricType 1.3.6.1.4.1.4526.10.2.4.7 integer read-write
Metric Type of the default route,which OSPF advertises when learned from other protocol. It can be 1(external type 1) or 2(external type 2). Enumeration: 'externalType2': 2, 'externalType1': 1.
         agentOspfRouteRedistTable 1.3.6.1.4.1.4526.10.2.4.8 no-access
This table contains the MIB objects required to configure route-redistribution for OSPF. Here, OSPF is the Destination protocol and the source protocols can be any of : BGP, RIP, Static, Connected.
             agentOspfRouteRedistEntry 1.3.6.1.4.1.4526.10.2.4.8.1 no-access
                 agentOspfRouteRedistSource 1.3.6.1.4.1.4526.10.2.4.8.1.1 integer read-only
Source protocol, from which OSPF can redistribute routes. This object also acts as the identifier for the OSPF redistribution Table entry. Enumeration: 'bgp': 4, 'connected': 1, 'static': 2, 'rip': 3.
                 agentOspfRouteRedistMode 1.3.6.1.4.1.4526.10.2.4.8.1.2 integer read-write
User enabels/disables route-redistribution for a particular source protocol. Enumeration: 'enable': 1, 'disable': 2.
                 agentOspfRouteRedistMetric 1.3.6.1.4.1.4526.10.2.4.8.1.3 integer32 read-write
Metric used for redistributing a particular source protocol route into OSPF.
                 agentOspfRouteRedistMetricConfigured 1.3.6.1.4.1.4526.10.2.4.8.1.4 truthvalue read-write
Flag to determine whether OSPF redistribute-metric is configured or not.
                 agentOspfRouteRedistMetricType 1.3.6.1.4.1.4526.10.2.4.8.1.5 integer read-write
Metric Type of routes,which OSPF redistributes from other source protocols. It can be 1(external type 1) or 2(external type 2). Enumeration: 'externalType2': 2, 'externalType1': 1.
                 agentOspfRouteRedistTag 1.3.6.1.4.1.4526.10.2.4.8.1.6 unsigned32 read-write
It specifies the tag field in routes redistributed by OSPF.
                 agentOspfRouteRedistSubnets 1.3.6.1.4.1.4526.10.2.4.8.1.7 truthvalue read-write
If this value is false, then OSPF will not redistribute subnetted routes.
                 agentOspfRouteRedistDistList 1.3.6.1.4.1.4526.10.2.4.8.1.8 unsigned32 read-write
Access-list number of the access-list, which filters routes received from a source-protocol.
                 agentOspfRouteRedistDistListConfigured 1.3.6.1.4.1.4526.10.2.4.8.1.9 truthvalue read-write
Flag to determine whether Access-list is configured or not.
         agentOspfIfTable 1.3.6.1.4.1.4526.10.2.4.9 no-access
The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF. Augments ospfIfTable from the OSPF-MIB.
             agentOspfIfEntry 1.3.6.1.4.1.4526.10.2.4.9.1 no-access
The OSPF Interface Entry describes one inter- face from the viewpoint of OSPF. Augments ospfIfEntry in OSPF-MIB.
                 agentOspfIfAuthKeyId 1.3.6.1.4.1.4526.10.2.4.9.1.1 integer read-only
The identifier for the authentication key used on this interface. This field is only meaningful when the OSPF-MIB ospfIfAuthType is md5(2); otherwise, the value is not used.
                 agentOspfIfIpMtuIgnoreFlag 1.3.6.1.4.1.4526.10.2.4.9.1.2 integer read-write
Configures the IP MTU Ignore Flag value for this OSPF interface. Enumeration: 'enable': 1, 'disable': 2.
         agentOspfVirtIfTable 1.3.6.1.4.1.4526.10.2.4.10 no-access
Information about this router's virtual inter- faces. Augments ospfVirtIfTable from the OSPF-MIB.
               agentOspfVirtIfEntry 1.3.6.1.4.1.4526.10.2.4.10.1 no-access
Information about a single Virtual Interface. Augments ospfVirtIfEntry in OSPF-MIB.
                   agentOspfVirtIfAuthKeyId 1.3.6.1.4.1.4526.10.2.4.10.1.1 integer read-only
The identifier for the authentication key used on this virtual interface. This field is only meaningful when the OSPF-MIB ospfVirtIfAuthType is md5(2); otherwise, the value is not used.
         agentRouterOspfRFC1583CompatibilityMode 1.3.6.1.4.1.4526.10.2.4.11 integer read-write
From RFC2328: Controls the preference rules used in Section 16.4 when choosing among multiple AS-external-LSAs advertising the same destination. When set to 'enabled', the preference rules remain those specified by RFC 1583 ([Ref9]). When set to 'disabled', the preference rules are those stated in Section 16.4.1, which prevent routing loops when AS- external-LSAs for the same destination have been originated from different areas. Set to 'enabled' by default. In order to minimize the chance of routing loops, all OSPF routers in an OSPF routing domain should have RFC1583Compatibility set identically. When there are routers present that have not been updated with the functionality specified in Section 16.4.1 of this memo, all routers should have RFC1583Compatibility set to 'enabled'. Otherwise, all routers should have RFC1583Compatibility set to 'disabled', preventing all routing loops. Enumeration: 'enable': 1, 'disable': 2.
     agentSnmpTrapFlagsConfigGroupLayer3 1.3.6.1.4.1.4526.10.2.5
         agentSnmpVRRPNewMasterTrapFlag 1.3.6.1.4.1.4526.10.2.5.1 integer read-write
This flag enables the sending of VRRP new master notification traps. Enumeration: 'enable': 1, 'disable': 2.
         agentSnmpVRRPAuthFailureTrapFlag 1.3.6.1.4.1.4526.10.2.5.2 integer read-write
This flag enables the sending of VRRP authentication failure notification traps. Enumeration: 'enable': 1, 'disable': 2.
     agentBootpDhcpRelayGroup 1.3.6.1.4.1.4526.10.2.6
         agentBootpDhcpRelayMaxHopCount 1.3.6.1.4.1.4526.10.2.6.1 integer32 read-write
The BOOTP/DHCP Max Hop Count. The relay agent silently discards BOOTREQUEST messages whose hops field exceeds the value 16 assuming that the request is looped through the intermediate agents. The default value is 4.
         agentBootpDhcpRelayForwardingIp 1.3.6.1.4.1.4526.10.2.6.2 ipaddress read-write
The BOOTP/DHCP Server IP Address. All the requests will be forwarded and the replies expected from this address.
         agentBootpDhcpRelayForwardMode 1.3.6.1.4.1.4526.10.2.6.3 integer read-write
The BOOTP/DHCP Admin Mode. The relaying functionality can be administratively enabled or disabled by this object Enumeration: 'enable': 1, 'disable': 2.
         agentBootpDhcpRelayMinWaitTime 1.3.6.1.4.1.4526.10.2.6.4 integer32 read-write
The BOOTP/DHCP Minimum Wait Time. When the BOOTP relay agent receives a BOOTREQUEST message, it MAY use the value of the 'secs' (seconds since client began booting) field of the request as a factor in deciding whether to relay the request or not.
         agentBootpDhcpRelayCircuitIdOptionMode 1.3.6.1.4.1.4526.10.2.6.5 integer read-write
The BOOTP/DHCP Circuit ID Option Mode. This flag is set to enable/disable the network element to add/remove the DHCP Relay agent Circuit ID sub-options. Enumeration: 'enable': 1, 'disable': 2.
         agentBootpDhcpRelayNumOfRequestsReceived 1.3.6.1.4.1.4526.10.2.6.6 integer32 read-only
The Number of BOOTP/DHCP Requests Received. Total number of BOOTREQUESTs received from all clients.
         agentBootpDhcpRelayNumOfRequestsForwarded 1.3.6.1.4.1.4526.10.2.6.7 integer32 read-only
The Number of BOOTP/DHCP Requests Forwarded. Total number of BOOTREQUESTs forwarded to the next agents/servers.
         agentBootpDhcpRelayNumOfDiscards 1.3.6.1.4.1.4526.10.2.6.8 integer32 read-only
The Number of BOOTP/DHCP Discards. Total number of packets discarded by the network element because of error in the packet.
     agentECMPGroup 1.3.6.1.4.1.4526.10.2.7
         agentECMPOspfMaxPaths 1.3.6.1.4.1.4526.10.2.7.1 integer32 read-write
It sets the number of paths that OSPF can report for a given destination where maxpaths is platform-dependent.