NETGEAR-NSF-MIB: View SNMP OID List / Download MIB

VENDOR: NETGEAR


 Home MIB: NETGEAR-NSF-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, NETGEAR-INVENTORY-MIB, NETGEAR-REF-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 fastPathNsf 1.3.6.1.4.1.4526.10.46
       agentNsfTraps 1.3.6.1.4.1.4526.10.46.0
       agentNsfUnitTable 1.3.6.1.4.1.4526.10.46.1
A table of Per-Unit configuration objects for NSF.
           agentNsfUnitEntry 1.3.6.1.4.1.4526.10.46.1.1
Each Instance corresponds with a different unit managed by this agent.
               agentNsfUnitSupport 1.3.6.1.4.1.4526.10.46.1.1.1
Indicates if the unit supports the NSF feature.
       agentNsfGroup 1.3.6.1.4.1.4526.10.46.2
           agentNsfAdminStatus 1.3.6.1.4.1.4526.10.46.2.1
Controls whether NSF is enabled on the unit/stack.
           agentNsfOperStatus 1.3.6.1.4.1.4526.10.46.2.2
Indicates whether NSF is enabled on the unit/stack.
           agentNsfLastStartupReason 1.3.6.1.4.1.4526.10.46.2.3
The type of activation that caused the software to start the last time. unknown: The switch rebooted for an unknown reason. power-on: The switch rebooted. This could have been caused by a power cycle or an administrative Reload command. warm-admin-move: The administrator issued a command for the stand-by manager to take over. cold-admin-move: The administrator issued a command for the stand-by manager to take over, but the system was not ready for a warm-failover. warm-auto-restart: The primary management card restarted due to a failure, and the system executed a nonstop forwarding failover. cold-auto-restart: The system switched from the active manager to the backup manager and was unable to maintain user data traffic. This is usually caused by multiple failures occurring close together
           agentNsfTimeSinceLastRestart 1.3.6.1.4.1.4526.10.46.2.4
Time since the current management card became the active management card.
           agentNsfRestartInProgress 1.3.6.1.4.1.4526.10.46.2.5
Whether a restart is in progress. A restart is not considered complete until all hardware tables have been fully reconciled.
           agentNsfWarmRestartReady 1.3.6.1.4.1.4526.10.46.2.6
Whether the initial full checkpoint has finished.
           agentNsfBackupConfigurationAge 1.3.6.1.4.1.4526.10.46.2.7
Age of the configuration on the backup unit. The time since the running configuration was last copied to the backup unit.
           agentNsfInitiateFailover 1.3.6.1.4.1.4526.10.46.2.8
Triggers an administrative failover to the backup unit.
       agentCheckpointStatsGroup 1.3.6.1.4.1.4526.10.46.3
           agentCheckpointClearStatistics 1.3.6.1.4.1.4526.10.46.3.1
When set to enable(1), resets checkpoint statistics.
           agentCheckpointMessages 1.3.6.1.4.1.4526.10.46.3.2
Total number of checkpoint messages sent.
           agentCheckpointBytes 1.3.6.1.4.1.4526.10.46.3.3
Size in bytes of the total ammount of checkpoint messages sent.
           agentCheckpointTimeSinceCountersCleared 1.3.6.1.4.1.4526.10.46.3.4
Indicates how long since the Checkpoint counters have been cleared.
           agentCheckpointMessageRateInterval 1.3.6.1.4.1.4526.10.46.3.5
Indicates the duration in seconds of the message rate interval.
           agentCheckpointMessageRate 1.3.6.1.4.1.4526.10.46.3.6
Number of checkpoint messages received in the last interval defined by agentCheckpointMessageRateInterval.
           agentCheckpointHighestMessageRate 1.3.6.1.4.1.4526.10.46.3.7
Highest number of checkpoint messages received in an interval defined by agentCheckpointMessageRateInterval.
       agentNsfOspfGroup 1.3.6.1.4.1.4526.10.46.4
           agentNsfOspfSupportMode 1.3.6.1.4.1.4526.10.46.4.1
           agentNsfOspfRestartInterval 1.3.6.1.4.1.4526.10.46.4.2
           agentNsfOspfRestartStatus 1.3.6.1.4.1.4526.10.46.4.3
           agentNsfOspfRestartAge 1.3.6.1.4.1.4526.10.46.4.4
           agentNsfOspfRestartExitReason 1.3.6.1.4.1.4526.10.46.4.5
           agentNsfOspfHelperSupportMode 1.3.6.1.4.1.4526.10.46.4.6
           agentNsfOspfHelperStrictLSAChecking 1.3.6.1.4.1.4526.10.46.4.7