NBS-TUNABLE-MIB: View SNMP OID List / Download MIB

VENDOR: NBASE SWITCH COMMUNICATION

Home	MIB: NBS-TUNABLE-MIB
Download as:		SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, NBS-CMMC-MIB		Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash). Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded. The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.

Object Name	OID	Type	Access	Info
nbsTunableMib	1.3.6.1.4.1.629.203			MIB for representing Tunable Optics parameters
nbsTunableGrp	1.3.6.1.4.1.629.203.1			MIB for representing Tunable Optics parameters
nbsTunableChannelTableSize	1.3.6.1.4.1.629.203.1.1	unsigned32	read-only	The number of entries in nbsTunableChannelTable.
nbsTunableChannelTable	1.3.6.1.4.1.629.203.1.2		no-access	A table to report and configure tunable optics settings.
nbsTunableChannelEntry	1.3.6.1.4.1.629.203.1.2.1		no-access	Describes a setting for an interface's tunable optics.
nbsTunableChannelIfIndex	1.3.6.1.4.1.629.203.1.2.1.1	interfaceindex	read-only	The Mib2 ifIndex of this optic's port
nbsTunableChannelFreqStart	1.3.6.1.4.1.629.203.1.2.1.2	integer	read-only	The first allowable frequency for this tunable optic, in GigaHertz (GHz), unless FreqExponent != 9. For L-Band, ITU Grid 48 is '184800' For Q-Band, ITU Grid 48 is '184850' For C-Band, ITU Grid 1 is '190100' For H-Band, ITU Grid 1 is '190150' If GHz does not provide the appropriate resolution, the tunable optic may report a FreqExponent less than 9. If 32 bits is insufficient to cover the range in GHz, the tunable optic may report a FreqExponent greater than 9.
nbsTunableChannelFreqEnd	1.3.6.1.4.1.629.203.1.2.1.3	integer	read-only	The last allowable frequency (inclusive) for this tunable optic, in GigaHertz (GHz), unless FreqExponent != 9. For L-Band, ITU Grid 99 is '189900' For Q-Band, ITU Grid 99 is '189950' For C-Band, ITU Grid 72 is '197200' For H-Band, ITU Grid 72 is '197250' If GHz does not provide the appropriate resolution, the tunable optic may report a FreqExponent less than 9. If 32 bits is insufficient to cover the range in GHz, the tunable optic may report a FreqExponent greater than 9.
nbsTunableChannelFreqStep	1.3.6.1.4.1.629.203.1.2.1.4	integer	read-only	The spacing of the allowable frequencies that this tunable optic supports, in GigaHertz (GHz), unless FreqExponent != 9. 100 indicates the standard ITU grid spacing of 100GHz. For example, if this tunable optic supports both C and H band, or both Q and L band, FreqStep should report 50. If this tunable optic supports steps finer than 1GHz, the tunable optic may report a FreqExponent less than 9.
nbsTunableChannelFreqExponent	1.3.6.1.4.1.629.203.1.2.1.5	integer	read-only	The exponent of all the Freq values (including FreqStep). 9 (the default) indicates all units are in GigaHertz (GHz).
nbsTunableChannelFreqAdmin	1.3.6.1.4.1.629.203.1.2.1.6	integer	read-write	The administratively desired frequency of this tunable optic, in GigaHertz (GHz), unless FreqExponent != 9.
nbsTunableChannelFreqOper	1.3.6.1.4.1.629.203.1.2.1.7	integer	read-only	The current operational frequency of this tunable optic, in GigaHertz (GHz), unless FreqExponent != 9.
nbsTunableChannelFreqDefault	1.3.6.1.4.1.629.203.1.2.1.8	integer	read-only	The default frequency of this tunable optic, in GigaHertz (GHz), unless FreqExponent != 9.