NBS-OSA-MIB: View SNMP OID List / Download MIB
VENDOR: NBASE SWITCH COMMUNICATION
Home | MIB: NBS-OSA-MIB | |||
---|---|---|---|---|
Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
Object Name | OID | Type | Access | Info |
nbsOsaMib | 1.3.6.1.4.1.629.207 |
MIB for controlling and monitoring optical spectrum analyzers |
||
nbsOsaPortGrp | 1.3.6.1.4.1.629.207.1 |
OSA Card information |
||
nbsOsaPortTableSize | 1.3.6.1.4.1.629.207.1.1 | unsigned32 | read-only |
The number of entries in nbsOsaPortTable. |
nbsOsaPortTable | 1.3.6.1.4.1.629.207.1.2 | no-access | ||
1.3.6.1.4.1.629.207.1.2.1 | no-access | |||
nbsOsaPortIfIndex | 1.3.6.1.4.1.629.207.1.2.1.2 | interfaceindex | no-access |
The Mib2 ifIndex of the optical spectrum analyzer port |
nbsOsaPortAttenuation | 1.3.6.1.4.1.629.207.1.2.1.3 | integer | read-write |
Attenuation subtracted from RxPower readings, in millidecibels (mdB). When SET, agent immediately clears nbsOsaChannelTable and nbsOsaSpectrumTable entries for this ifIndex. |
nbsOsaPortChannels | 1.3.6.1.4.1.629.207.1.2.1.4 | integer | read-only |
The number of nbsOsaChannelTable entries for this port. |
nbsOsaSpectrumGrp | 1.3.6.1.4.1.629.207.2 |
Info and settings for channels |
||
nbsOsaSpectrumTableSize | 1.3.6.1.4.1.629.207.2.1 | unsigned32 | read-only |
The number of entries in nbsOsaSpectrumTable. |
nbsOsaSpectrumTable | 1.3.6.1.4.1.629.207.2.2 | no-access |
Table of supported channels, their signal strength, and user-configured thresholds. |
|
1.3.6.1.4.1.629.207.2.2.1 | no-access |
Reports status of monitored frequencies. |
||
nbsOsaSpectrumIfIndex | 1.3.6.1.4.1.629.207.2.2.1.2 | interfaceindex | no-access |
The Mib2 ifIndex of the optical spectrum analyzer port |
nbsOsaSpectrumWavelength | 1.3.6.1.4.1.629.207.2.2.1.3 | integer | no-access |
The measured wavelength, in picometers (pm). |
nbsOsaSpectrumTimestamp | 1.3.6.1.4.1.629.207.2.2.1.4 | timeticks | read-only |
Value of sysUptime when this table row was last updated. |
nbsOsaSpectrumRxPowerOper | 1.3.6.1.4.1.629.207.2.2.1.5 | integer | read-only |
The last known signal strength, in millidecibels (mdBm), of this channel. |
nbsOsaChannelGrp | 1.3.6.1.4.1.629.207.3 |
Info and settings for channels |
||
nbsOsaChannelTableSize | 1.3.6.1.4.1.629.207.3.1 | unsigned32 | read-only |
The number of entries in nbsOsaChannelTable. |
nbsOsaChannelTable | 1.3.6.1.4.1.629.207.3.2 | no-access |
Table of supported channels, their signal strength, and user-configured thresholds. |
|
1.3.6.1.4.1.629.207.3.2.1 | no-access |
Reports status of monitored frequencies. |
||
nbsOsaChannelIfIndex | 1.3.6.1.4.1.629.207.3.2.1.1 | interfaceindex | no-access |
The Mib2 ifIndex of the optical spectrum analyzer port |
nbsOsaChannelFrequencyNominal | 1.3.6.1.4.1.629.207.3.2.1.2 | integer | no-access |
The nominal frequency, in MHz, of this channel. |
nbsOsaChannelBand | 1.3.6.1.4.1.629.207.3.2.1.3 | integer | read-only |
The ITU grid labels DWDM channels with a letter 'band' and a numeric channel. Within this mib, the band is indicated by this object, and the channel number is shown in the object nbsOsaChannelNumber. Frequencies of at least 180100 GHz but less than 190100 GHz are considered the L spectrum, and frequencies of at least 190100 but less than 200100 GHz are considered the C spectrum. Frequencies evenly divisible by 100 GHz are designated with a 'C' or 'L' prepended to the channel number. Frequencies that are offset by 50 GHz are designated 'H' within the C spectrum, and 'Q' within the L spectrum. Enumeration: 'hBand': 2, 'qBand': 4, 'cBand': 1, 'lBand': 3. |
nbsOsaChannelNumber | 1.3.6.1.4.1.629.207.3.2.1.4 | integer | read-only |
The channel number can be derived by extracting the two middle digits from the six digit frequency in GHz. |
nbsOsaChannelStatus | 1.3.6.1.4.1.629.207.3.2.1.5 | integer | read-only |
If the OSA thinks the channel is there or not. Enumeration: 'absent': 1, 'present': 2. |
nbsOsaChannelTimestamp | 1.3.6.1.4.1.629.207.3.2.1.6 | timeticks | read-only |
Value of sysUptime when this table row was last updated. |
nbsOsaChannelFrequencyOper | 1.3.6.1.4.1.629.207.3.2.1.7 | integer | read-only |
The measured frequency, in MHz, of this channel. |
nbsOsaChannelRxPowerOper | 1.3.6.1.4.1.629.207.3.2.1.8 | integer | read-only |
The last known signal strength, in millidecibels (mdBm), of this channel. |
nbsOsaChannelRxPowerMin | 1.3.6.1.4.1.629.207.3.2.1.9 | integer | read-write |
The user-specified minimum signal strength, in millidecibels (mdBm), of this channel. |
nbsOsaChannelRxPowerMax | 1.3.6.1.4.1.629.207.3.2.1.10 | integer | read-write |
The user-specified maximum signal strength, in millidecibels (mdBm), of this channel. |
nbsOsaChannelOSNROper | 1.3.6.1.4.1.629.207.3.2.1.11 | integer | read-only |
The last known OSNR, in permil, of this channel. |
nbsOsaChannelOSNRMin | 1.3.6.1.4.1.629.207.3.2.1.12 | integer | read-write |
The user-specified minimum OSNR of this channel |
nbsOsaChannelOSNRMax | 1.3.6.1.4.1.629.207.3.2.1.13 | integer | read-write |
The user-specified maximum OSNR of this channel |
nbsOsaTraps | 1.3.6.1.4.1.629.207.4 |
SNMP Traps or Notifications |
||
nbsOsaTrapPortChannelAdded | 1.3.6.1.4.1.629.207.4.1 |
Sent when optical spectrum analyser first detects a channel. This Notification should be of Severity ERROR. |
||
nbsOsaTrapPortChannelDropped | 1.3.6.1.4.1.629.207.4.2 |
Sent when optical spectrum analyser stops detecting a channel. This Notification should be of Severity ERROR. |
||
nbsOsaTrapPortRxPowerTooLow | 1.3.6.1.4.1.629.207.4.3 |
Sent when RxPower is lower then the configured threshold. This Notification should be of Severity ERROR. |
||
nbsOsaTrapPortRxPowerOK | 1.3.6.1.4.1.629.207.4.4 |
Sent when RxPower is OK. This Notification should be of Severity ERROR. |
||
nbsOsaTrapPortRxPowerTooHigh | 1.3.6.1.4.1.629.207.4.5 |
Sent when RxPower is higher then the configured threshold. This Notification should be of Severity ERROR. |
||
nbsOsaTrapPortOSNRTooLow | 1.3.6.1.4.1.629.207.4.6 |
Sent when OSNR is lower then the configured threshold. This Notification should be of Severity ERROR. |
||
nbsOsaTrapPortOSNROK | 1.3.6.1.4.1.629.207.4.7 |
Sent when OSNR is ok. This Notification should be of Severity ERROR. |
||
nbsOsaTrapPortOSNRTooHigh | 1.3.6.1.4.1.629.207.4.8 |
Sent when OSNR is higher then the configured threshold. This Notification should be of Severity ERROR. |