MSERIES-PORT-MIB: View SNMP OID List / Download MIB

VENDOR: SMARTOPTICS AS


 Home MIB: MSERIES-PORT-MIB
Download as:   
SNMPv2-CONF, MSERIES-MIB, SNMPv2-SMI, SNMPv2-TC, MSERIES-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 smartPort 1.3.6.1.4.1.30826.1.3
This is the enterprise specific Port MIB for SmartOptics M-Series.
     smartPortObjects 1.3.6.1.4.1.30826.1.3.1
         smartPortGeneral 1.3.6.1.4.1.30826.1.3.1.1
         smartPortList 1.3.6.1.4.1.30826.1.3.1.2
             smartPortTable 1.3.6.1.4.1.30826.1.3.1.2.1 no-access
A port table.
                 smartPortEntry 1.3.6.1.4.1.30826.1.3.1.2.1.1 no-access
An entry in the port list.
                     smartPortIndex 1.3.6.1.4.1.30826.1.3.1.2.1.1.1 unsigned32 read-only
A unique index for each port that corresponds to the index in the interface table
                     smartPortName 1.3.6.1.4.1.30826.1.3.1.2.1.1.2 displaystring read-only
The name of the port.
                     smartPortAlias 1.3.6.1.4.1.30826.1.3.1.2.1.1.3 displaystring read-write
User configurable Port Alias for the port. Not writeable in SmartOS v2.3
                     smartPortType 1.3.6.1.4.1.30826.1.3.1.2.1.1.4 porttype read-only
The type of port. rx(1) - Receiving port. tx(2) - Transmitting port. biDi(3) - Bidirectional port.
                     smartPortPower 1.3.6.1.4.1.30826.1.3.1.2.1.1.5 integer32 read-only
The power level in units of 0.1 dBm.
                     smartPortStatus 1.3.6.1.4.1.30826.1.3.1.2.1.1.6 portstatus read-only
The operational state for a port. idle(1) - The port is not activated down(2) - The port traffic is lost. up(3) - There is traffic on the port. high(4) - The port got to high power. low(5) - The port got to low power. eyeSafety(6) - The Line Tx port is in Eye Safety Mode. This means that either the connector on the Line Tx port is not inserted or that you have too strong reflection from the line fiber. cd(7) - Channel detected. ncd(8) - No channel detected.
                     smartPortMode 1.3.6.1.4.1.30826.1.3.1.2.1.1.7 portmode read-write
The Mode of the Port. normal (1) - The port is active. No alarms are beeing suppressed. service (2) . The port is in service mode and alarms are beeing suppressed. When service is ready smartPortMode should be set to 'normal' again. Not writeable in SmartOS v2.3
                     smartPortHighPowerAlarmThreshold 1.3.6.1.4.1.30826.1.3.1.2.1.1.8 integer32 read-write
The threshold for the High Power alarm. Not writeable in SmartOS v2.3
                     smartPortLowPowerAlarmThreshold 1.3.6.1.4.1.30826.1.3.1.2.1.1.9 integer32 read-write
The threshold for the Low Power alarm. Not writeable in SmartOS v2.3
     smartPortMIBConformance 1.3.6.1.4.1.30826.1.3.2
         smartPortGroups 1.3.6.1.4.1.30826.1.3.2.1
             smartPortListGroupV1 1.3.6.1.4.1.30826.1.3.2.1.1
The Port List MIB objects v1.
         smartPortCompliances 1.3.6.1.4.1.30826.1.3.2.2
             smartPortBasicComplV1 1.3.6.1.4.1.30826.1.3.2.2.1
Basic implementation requirements for the port MIB V1.