MOXA-W2x50A-MIB: View SNMP OID List / Download MIB
VENDOR: MOXA TECHNOLOGIES CO.
| Home | MIB: MOXA-W2x50A-MIB | |||
|---|---|---|---|---|
| Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
| Object Name | OID | Type | Access | Info |
| moxa | 1.3.6.1.4.1.8691 | |||
| nport | 1.3.6.1.4.1.8691.2 | |||
| w2x50A | 1.3.6.1.4.1.8691.2.13 |
The MIB module for Moxa NPort W2x50A series specific information. |
||
| swMgmt | 1.3.6.1.4.1.8691.2.13.1 | |||
| overview | 1.3.6.1.4.1.8691.2.13.1.1 | |||
| modelName | 1.3.6.1.4.1.8691.2.13.1.1.1 | displaystring | read-only |
The model name of the NPort. The possible values of this parameter are: 'NPort W2x50A' for NPort W2x50A. |
| serialNumber | 1.3.6.1.4.1.8691.2.13.1.1.2 | integer | read-only |
The serial number of the NPort. Every NPort W2x50A series device server is assigned a unique serial number before it is shipped. |
| firmwareVersion | 1.3.6.1.4.1.8691.2.13.1.1.3 | displaystring | read-only |
The version of the firmware currently running on the NPort. |
| ethIPAddress | 1.3.6.1.4.1.8691.2.13.1.1.4 | displaystring | read-only |
The IP address of the NPort's Ethernet interface. |
| ethMacAddress | 1.3.6.1.4.1.8691.2.13.1.1.5 | macaddress | read-only |
The MAC address of the NPort's Ethernet interface. |
| wlanIPAddress | 1.3.6.1.4.1.8691.2.13.1.1.6 | displaystring | read-only |
The IP address of the NPort's WLAN interface. |
| wlanMacAddress | 1.3.6.1.4.1.8691.2.13.1.1.7 | macaddress | read-only |
The MAC address of the NPort's WLAN interface. |
| wlanSSID | 1.3.6.1.4.1.8691.2.13.1.1.8 | displaystring | read-only |
The SSID of WLAN. |
| wlanNetworkType | 1.3.6.1.4.1.8691.2.13.1.1.9 | displaystring | read-only |
Network Type of Wireless LAN. The possible values are 'Infrastrcture Mode' and 'Ad-hoc Mode' |
| wlanSecurityMode | 1.3.6.1.4.1.8691.2.13.1.1.10 | displaystring | read-only |
Security mode of Wireless LAN. The possible values are 'Open System', 'Shared Key', 'WPA', 'WPA-PSK', 'WPA2', 'WPA2-PSK' |
| wlanRFType | 1.3.6.1.4.1.8691.2.13.1.1.11 | displaystring | read-only |
RF type of Wireless LAN. The possible values are 'Auto', '802.11b', '802.11g' |
| wlanCountryCode | 1.3.6.1.4.1.8691.2.13.1.1.12 | displaystring | read-only |
WLAN country code |
| wlanFastRoaming | 1.3.6.1.4.1.8691.2.13.1.1.13 | displaystring | read-only |
Fast roaming state |
| activeNetworkPort | 1.3.6.1.4.1.8691.2.13.1.1.14 | displaystring | read-only |
Current active network port. The possible values are 'WLAN', 'Ethernet' |
| upTime | 1.3.6.1.4.1.8691.2.13.1.1.15 | displaystring | read-only |
The time (in human-readable notation) since the system was last re-initialized. |
| serialPort1 | 1.3.6.1.4.1.8691.2.13.1.1.16 | displaystring | read-only |
View NPort's serial port 1 setting. |
| serialPort2 | 1.3.6.1.4.1.8691.2.13.1.1.17 | displaystring | read-only |
View NPort's serial port 2 setting. |
| basicSetting | 1.3.6.1.4.1.8691.2.13.1.2 | |||
| serverSetting | 1.3.6.1.4.1.8691.2.13.1.2.1 | |||
| serverName | 1.3.6.1.4.1.8691.2.13.1.2.1.1 | displaystring | read-write |
A text string used to identify the NPort. |
| serverLocation | 1.3.6.1.4.1.8691.2.13.1.2.1.2 | displaystring | read-write |
A text string used to identify the location of the NPort. This option is useful for specifying the location or application of different NPort device servers. |
| timeSetting | 1.3.6.1.4.1.8691.2.13.1.2.2 | |||
| timeZone | 1.3.6.1.4.1.8691.2.13.1.2.2.1 | integer | read-write |
The time-zone index of the NPort. Enumeration: 'GMT_0430_Kabul': 40, 'GMT_0100_Brussels-Copenhagen-Madrid-Paris-Vilnius': 26, 'GMT-0600_Saskatchewan': 9, 'GMT_1100_Magadan-Solomon-Is-New-Caledonia': 61, 'GMT_0500_Islamabad-Karachi-Tashkent': 42, 'GMT-0700_Mountain-Time-US_Canada': 6, 'GMT_0300_Moscow-St-Petersburg-Volgograd': 35, 'GMT_0500_Ekaterinburg': 41, 'GMT_0200_Athens-Istanbul-Minsk': 28, 'GMT_0330_Tehran': 37, 'GMT_0900_Osaka-Sapporo-Tokyo': 51, 'GMT_0800_Perth': 48, 'GMT-0400_Atlantic-Time-Canada': 14, 'GMT_1000_Canberra-Melbourne-Sydney': 57, 'GMT_0600_Colombo': 45, 'GMT_0400_Abu-Dhabi-Muscat': 38, 'GMT_1000_Vladivostok': 60, 'GMT-0100_Azores-Cape-Verde-Is': 21, 'GMT_1000_Hobart': 59, 'GMT-0300_Brasilia': 18, 'GMT-0400_Santiago': 16, 'GMT-0500_Indiana-East': 12, 'GMT_0100_Amsterdam-Berlin-Bern-Rome-Stockholm-Vienna': 24, 'GMT_1200_Auckland-Wllington': 62, 'GMT-1100_Midway-Island-Samoa': 1, 'GMT-1000_Hawaii': 2, 'GMT_Greenich-Mean-Time_Dublin-Edinburgh-Lisbon-London': 23, 'GMT_0200_Jerusalem': 33, 'GMT-0330_Newfoundland': 17, 'GMT_0930_Adelaide': 54, 'GMT_0800_Taipei': 50, 'GMT_0900_Yakutsk': 53, 'GMT_0300_Mairobi': 36, 'GMT_0600_Astana-Almaty-Dhaka': 44, 'GMT_0200_Harare-Pretoria': 31, 'GMT-0600_Central-Time-US_Canada': 7, 'GMT-1200_Eniwetok-Kwajalein': 0, 'GMT-0500_Eastern-Time-US_Canada': 11, 'GMT_0300_Baghdad-Kuwait-Riyadh': 34, 'GMT-0500_Bogota-Lima-Quito': 10, 'GMT-0900_Alaska': 3, 'GMT-0600_Mexico-City-Tegucigalpa': 8, 'GMT_0700_Bangkok-Hanoi-Jakarta': 46, 'GMT_0200_Bucharest': 29, 'GMT-0200_Mid-Atlantic': 20, 'GMT_0100_Sarajevo-Skopje-Warsaw-Zagreb': 27, 'GMT_Casabanca-Monrovia': 22, 'GMT-0300_Buenos-Aires': 19, 'GMT_0800_Beijing-Chongqing-Hong-Kong-Urumqi': 47, 'GMT_0200_Helsinki-Riga-Sofia-Tallinn': 32, 'GMT_0530_Bombay-Calcutta-Madras-New-Delhi': 43, 'GMT_0800_Singapore': 49, 'GMT-0430_Caracas': 13, 'GMT_0400_Baku-Tbilisi': 39, 'GMT_1000_Guam-Port-Moresby': 58, 'GMT_0930_Darwin': 55, 'GMT_0900_Seoul': 52, 'GMT_1200_Fiji-Kamchatka-Marshall-Is': 63, 'GMT_0100_Belgrade-Bratislava-Budapest-Ljubljana-Prague': 25, 'GMT_1000_Brisbane': 56, 'GMT-0800_Pacific-Time-US_Canada-Tijuana': 4, 'GMT-0400_Georgetown-La-Paz': 15, 'GMT_0200_Cairo': 30, 'GMT-0700_Arizona': 5. |
| localTime | 1.3.6.1.4.1.8691.2.13.1.2.2.2 | displaystring | read-write |
The system time in the following format yyyy/mm/dd hh:mm:ss |
| timeServer | 1.3.6.1.4.1.8691.2.13.1.2.2.3 | displaystring | read-write |
The NPort W2x50A series device server uses SNTP (RFC-1769) for auto time calibration. Input the correct 'Time server' IP address or domain name. Once the NPort W2x50A series device server is configured with the correct Time server address, it will request time information from the Time server every 10 minutes. |
| networkSetting | 1.3.6.1.4.1.8691.2.13.1.3 | |||
| generalSetting | 1.3.6.1.4.1.8691.2.13.1.3.1 | |||
| dnsServer1IpAddr | 1.3.6.1.4.1.8691.2.13.1.3.1.1 | ipaddress | read-write |
The first DNS server address. When the user wants to visit a particular website, the computer asks a Domain Name System (DNS) server for the website's correct IP address, and then the computer uses the response to connect to the web server. DNS is the way that Internet domain names are identified and translated into IP addresses. A domain name is an alphanumeric name, such as moxa.com, that it is usually easier to remember. A DNS server is a host that translates this kind of text-based domain name into the numeric IP address used to establish a TCP/IP connection. |
| dnsServer2IpAddr | 1.3.6.1.4.1.8691.2.13.1.3.1.2 | ipaddress | read-write |
The second DNS server address. When the user wants to visit a particular website, the computer asks a Domain Name System (DNS) server for the website's correct IP address, and then the computer uses the response to connect to the web server. DNS is the way that Internet domain names are identified and translated into IP addresses. A domain name is an alphanumeric name, such as moxa.com, that it is usually easier to remember. A DNS server is a host that translates this kind of text-based domain name into the numeric IP address used to establish a TCP/IP connection. |
| ethernetSetting | 1.3.6.1.4.1.8691.2.13.1.3.2 | |||
| ethIpConfiguration | 1.3.6.1.4.1.8691.2.13.1.3.2.1 | integer | read-write |
The IP configuration mode of the NPort. You can choose from four possible IP configuration modes: Static, DHCP, DHCP/BOOTP, BOOTP. Enumeration: 'dhcp': 1, 'static': 0, 'bootp': 2. |
| ethIpAddress | 1.3.6.1.4.1.8691.2.13.1.3.2.2 | ipaddress | read-write |
An IP address is a number assigned to a network device (such as a computer) as a permanent address on the network. Computers use the IP address to identify and talk to each other over the network. Choose a proper IP address that is unique and valid in your network environment. |
| ethNetMask | 1.3.6.1.4.1.8691.2.13.1.3.2.3 | ipaddress | read-write |
A subnet mask represents all of the network hosts at one geographic location, in one building, or on the same local area network. When a packet is sent out over the network, the NPort W2x50A series device server will use the subnet mask to check whether the TCP/IP host specified in the packet is on the local network segment. If the address is on the same network segment as the NPort W2x50A series device server, a connection is established directly from the NPort W2x50A series device server. Otherwise, the connection is established through the given default gateway. |
| ethDefaultGateway | 1.3.6.1.4.1.8691.2.13.1.3.2.4 | ipaddress | read-write |
A gateway is a network computer that acts as an entrance to another network. Usually, the computers that control traffic within the network or at the local Internet service provider are gateway nodes. The NPort W2x50A series device server needs to know the IP address of the default gateway computer in order to communicate with the hosts outside the local network environment. For correct gateway IP address information, consult with the network administrator. |
| ethBridgeMode | 1.3.6.1.4.1.8691.2.13.1.3.2.5 | integer | read-write |
Enable or disable the bridge function. Enumeration: 'enable': 1, 'disable': 0. |
| wlanSetting | 1.3.6.1.4.1.8691.2.13.1.3.3 | |||
| wlanIpConfiguration | 1.3.6.1.4.1.8691.2.13.1.3.3.1 | integer | read-write |
The IP configuration mode of the NPort. You can choose from four possible IP configuration modes: Static, DHCP, DHCP/BOOTP, BOOTP. Enumeration: 'dhcp': 1, 'static': 0, 'bootp': 2. |
| wlanIpAddress | 1.3.6.1.4.1.8691.2.13.1.3.3.2 | ipaddress | read-write |
An IP address is a number assigned to a network device (such as a computer) as a permanent address on the network. Computers use the IP address to identify and talk to each other over the network. Choose a proper IP address that is unique and valid in your network environment. |
| wlanNetMask | 1.3.6.1.4.1.8691.2.13.1.3.3.3 | ipaddress | read-write |
A subnet mask represents all of the network hosts at one geographic location, in one building, or on the same local area network. When a packet is sent out over the network, the NPort W2x50A series device server will use the subnet mask to check whether the TCP/IP host specified in the packet is on the local network segment. If the address is on the same network segment as the NPort W2x50A series device server, a connection is established directly from the NPort W2x50A series device server. Otherwise, the connection is established through the given default gateway. |
| wlanDefaultGateway | 1.3.6.1.4.1.8691.2.13.1.3.3.4 | ipaddress | read-write |
A gateway is a network computer that acts as an entrance to another network. Usually, the computers that control traffic within the network or at the local Internet service provider are gateway nodes. The NPort W2x50A series device server needs to know the IP address of the default gateway computer in order to communicate with the hosts outside the local network environment. For correct gateway IP address information, consult with the network administrator. |
| profileSetting | 1.3.6.1.4.1.8691.2.13.1.3.4 | |||
| networkType | 1.3.6.1.4.1.8691.2.13.1.3.4.1 | integer | read-write |
Select WLAN network type. Enumeration: 'ad-hoc': 0, 'infrastructure': 1. |
| adhocProfile | 1.3.6.1.4.1.8691.2.13.1.3.4.2 | |||
| adhocGeneralSetting | 1.3.6.1.4.1.8691.2.13.1.3.4.2.1 | |||
| adhocProfileName | 1.3.6.1.4.1.8691.2.13.1.3.4.2.1.1 | displaystring | read-write |
Assign profile name. |
| adhocRFType | 1.3.6.1.4.1.8691.2.13.1.3.4.2.1.2 | integer | read-write |
Select WLAN network type. Enumeration: 'w802_11b_g': 2. |
| adhocWlanSSID | 1.3.6.1.4.1.8691.2.13.1.3.4.2.1.3 | displaystring | read-write |
Set WLAN SSID |
| adhocChannel | 1.3.6.1.4.1.8691.2.13.1.3.4.2.1.4 | integer | read-write |
Display currently used channel. When in Ad-Hoc mode, this value can be set. mode region possible channel ====================================== 802.11b_g : 1, 2, 3, 4, 5, 7, 8, 9, 10, 11, 12, 13 |
| adhocSecuritySetting | 1.3.6.1.4.1.8691.2.13.1.3.4.2.2 | |||
| adhocAuthentication | 1.3.6.1.4.1.8691.2.13.1.3.4.2.2.1 | integer | read-only |
Wireless LAN autentication type. Enumeration: 'open-system': 0. |
| adhocEncryption | 1.3.6.1.4.1.8691.2.13.1.3.4.2.2.2 | integer | read-write |
Set encryption type. Enumeration: 'wep': 1, 'disable': 0. |
| adhocWepKeyLength | 1.3.6.1.4.1.8691.2.13.1.3.4.2.2.3 | integer | read-write |
WEP key length. Enumeration: 'key-128-bits': 1, 'key-64-bits': 0. |
| adhocWepKeyIndex | 1.3.6.1.4.1.8691.2.13.1.3.4.2.2.4 | integer | read-write |
WEP key index 1~4. |
| adhocWepKeyPassphrase | 1.3.6.1.4.1.8691.2.13.1.3.4.2.2.5 | displaystring | read-write |
WEP key passphrase. |
| adhocWepKeyFormat | 1.3.6.1.4.1.8691.2.13.1.3.4.2.2.6 | integer | read-write |
WEP key format. Enumeration: 'hex': 1, 'ascii': 0. |
| infrastructureProfile | 1.3.6.1.4.1.8691.2.13.1.3.4.3 | |||
| infraGeneralSetting | 1.3.6.1.4.1.8691.2.13.1.3.4.3.1 | |||
| infraGeneralSettingTable | 1.3.6.1.4.1.8691.2.13.1.3.4.3.1.1 | no-access |
WLAN profile general setting table. |
|
| 1.3.6.1.4.1.8691.2.13.1.3.4.3.1.1.1 | no-access |
WLAN profile general setting entry. |
||
| profileIndex | 1.3.6.1.4.1.8691.2.13.1.3.4.3.1.1.1.1 | integer | read-only |
The profile index Enumeration: 'profile1': 1. |
| profileName | 1.3.6.1.4.1.8691.2.13.1.3.4.3.1.1.1.2 | displaystring | read-write |
Assign profile name. |
| profileRFType | 1.3.6.1.4.1.8691.2.13.1.3.4.3.1.1.1.3 | integer | read-write |
Select WLAN network type. Enumeration: 'auto': 0, 'w802_11b_g': 2, 'w802_11a_n': 3, 'w802_11a': 1, 'w802_11b_g_n': 4. |
| profileWlanSSID | 1.3.6.1.4.1.8691.2.13.1.3.4.3.1.1.1.4 | displaystring | read-write |
Set WLAN SSID |
| securitySetting | 1.3.6.1.4.1.8691.2.13.1.3.4.3.2 | |||
| securitySettingTable | 1.3.6.1.4.1.8691.2.13.1.3.4.3.2.1 | no-access |
WLAN profile security setting table. |
|
| 1.3.6.1.4.1.8691.2.13.1.3.4.3.2.1.1 | no-access |
WLAN profile security setting entry. |
||
| authentication | 1.3.6.1.4.1.8691.2.13.1.3.4.3.2.1.1.1 | integer | read-write |
Wireless LAN autentication type. Enumeration: 'wpa-psk': 3, 'wpa2': 4, 'shared-key': 1, 'open-system': 0, 'wpa2-psk': 5, 'wpa': 2. |
| encryption | 1.3.6.1.4.1.8691.2.13.1.3.4.3.2.1.1.2 | integer | read-write |
Set encryption type. Selection rule is as following. authentication selectable encryption ============== ===================== open-system(0) disable(0), wep(1) shared-key(1) wep(1) wpa(2), wpa-psk(3) tkip(2), aes-ccmp(3) wpa2(4), wpa2-psk(5) tkip(2), aes-ccmp(3) Enumeration: 'tkip': 2, 'wep': 1, 'disable': 0, 'aes-ccmp': 3. |
| wepKeyLength | 1.3.6.1.4.1.8691.2.13.1.3.4.3.2.1.1.3 | integer | read-write |
WEP key length. Enumeration: 'key-128-bits': 1, 'key-64-bits': 0. |
| wepKeyIndex | 1.3.6.1.4.1.8691.2.13.1.3.4.3.2.1.1.4 | integer | read-write |
WEP key index 1~4. |
| wepKeyPassphrase | 1.3.6.1.4.1.8691.2.13.1.3.4.3.2.1.1.5 | displaystring | read-write |
WEP key passphrase. |
| wepKeyFormat | 1.3.6.1.4.1.8691.2.13.1.3.4.3.2.1.1.6 | integer | read-write |
WEP key format. Enumeration: 'hex': 1, 'ascii': 0. |
| eapMethod | 1.3.6.1.4.1.8691.2.13.1.3.4.3.2.1.1.12 | integer | read-write |
EAP method for WPA and WPA2 authentication. Enumeration: 'tls': 0, 'leap': 3, 'ttls': 2, 'peap': 1. |
| tunneledAuth | 1.3.6.1.4.1.8691.2.13.1.3.4.3.2.1.1.13 | integer | read-write |
Set tunneled authentication protocol when PEAP/TTLS is selected as EAP method. EAP method selectable tunneled authentication ========== ================================== peap(1) gtc(0), md5(1), mschapv2(5) ttls(2) pap(2), chap(3), mschap(4), mschapv2(5), eap-mschapv2(8), eap-gtc(9), eap-md5(10) Enumeration: 'pap': 2, 'tls': 6, 'mschapv2': 5, 'gtc': 0, 'eap-tls': 7, 'eap-mschapv2': 8, 'eap-md5': 10, 'mschap': 4, 'chap': 3, 'eap-gtc': 9, 'md5': 1. |
| wpaUsername | 1.3.6.1.4.1.8691.2.13.1.3.4.3.2.1.1.14 | displaystring | read-write |
WPA username for WPA and WPA2 authentication. |
| wpaAnonymousUsername | 1.3.6.1.4.1.8691.2.13.1.3.4.3.2.1.1.16 | displaystring | read-write |
Anonymous username needed when TTLS is selected as EAP method. |
| verifyServerCert | 1.3.6.1.4.1.8691.2.13.1.3.4.3.2.1.1.17 | integer | read-write |
The setting of verify server certificate. Enumeration: 'enable': 1, 'disable': 0. |
| trustedServerCert | 1.3.6.1.4.1.8691.2.13.1.3.4.3.2.1.1.18 | integer | read-only |
Display whether or not trusted server certificate is installed. Enumeration: 'installed': 1, 'not-installed': 0. |
| userCert | 1.3.6.1.4.1.8691.2.13.1.3.4.3.2.1.1.19 | integer | read-only |
Display whether or not user certificate is installed. Enumeration: 'installed': 1, 'not-installed': 0. |
| userPrivateKey | 1.3.6.1.4.1.8691.2.13.1.3.4.3.2.1.1.20 | integer | read-only |
Display whether or not user private key is installed. Enumeration: 'installed': 1, 'not-installed': 0. |
| fastRoamingSetting | 1.3.6.1.4.1.8691.2.13.1.3.4.3.3 | integer | read-write |
The setting of fast roaming. Enumeration: 'enable': 1, 'disable': 0. |
| fastRoamingScanChannels1 | 1.3.6.1.4.1.8691.2.13.1.3.4.3.4 | integer | read-write |
The scan channels of fast roaming. 0 represents 'N/A' ====================================================== Auot channel : 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 802.11a, 802.11a_n : 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 802.11b_g, 802.11b_g_n : 1, 2, 3, 4, 5, 7, 8, 9, 10, 11, 12, 13 Enumeration: 'channel_52': 19, 'channel_56': 20, 'channel_128': 30, 'channel_165': 38, 'channel_108': 25, 'channel_104': 24, 'n_a': 0, 'channel_100': 23, 'channel_5': 5, 'channel_4': 4, 'channel_7': 7, 'channel_6': 6, 'channel_1': 1, 'channel_3': 3, 'channel_2': 2, 'channel_161': 37, 'channel_149': 34, 'channel_9': 9, 'channel_8': 8, 'channel_64': 22, 'channel_124': 29, 'channel_40': 16, 'channel_60': 21, 'channel_44': 17, 'channel_48': 18, 'channel_140': 33, 'channel_120': 28, 'channel_112': 26, 'channel_116': 27, 'channel_136': 32, 'channel_132': 31, 'channel_157': 36, 'channel_153': 35, 'channel_36': 15, 'channel_11': 11, 'channel_10': 10, 'channel_13': 13, 'channel_12': 12. |
| fastRoamingScanChannels2 | 1.3.6.1.4.1.8691.2.13.1.3.4.3.5 | integer | read-write |
The scan channels of fast roaming. 0 represents 'N/A' ====================================================== Auot channel : 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 802.11a, 802.11a_n : 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 802.11b_g, 802.11b_g_n : 1, 2, 3, 4, 5, 7, 8, 9, 10, 11, 12, 13 Enumeration: 'channel_52': 19, 'channel_56': 20, 'channel_128': 30, 'channel_165': 38, 'channel_108': 25, 'channel_104': 24, 'n_a': 0, 'channel_100': 23, 'channel_5': 5, 'channel_4': 4, 'channel_7': 7, 'channel_6': 6, 'channel_1': 1, 'channel_3': 3, 'channel_2': 2, 'channel_161': 37, 'channel_149': 34, 'channel_9': 9, 'channel_8': 8, 'channel_64': 22, 'channel_124': 29, 'channel_40': 16, 'channel_60': 21, 'channel_44': 17, 'channel_48': 18, 'channel_140': 33, 'channel_120': 28, 'channel_112': 26, 'channel_116': 27, 'channel_136': 32, 'channel_132': 31, 'channel_157': 36, 'channel_153': 35, 'channel_36': 15, 'channel_11': 11, 'channel_10': 10, 'channel_13': 13, 'channel_12': 12. |
| fastRoamingScanChannels3 | 1.3.6.1.4.1.8691.2.13.1.3.4.3.6 | integer | read-write |
The scan channels of fast roaming. 0 represents 'N/A' ====================================================== Auot channel : 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 802.11a, 802.11a_n : 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 802.11b_g, 802.11b_g_n : 1, 2, 3, 4, 5, 7, 8, 9, 10, 11, 12, 13 Enumeration: 'channel_52': 19, 'channel_56': 20, 'channel_128': 30, 'channel_165': 38, 'channel_108': 25, 'channel_104': 24, 'n_a': 0, 'channel_100': 23, 'channel_5': 5, 'channel_4': 4, 'channel_7': 7, 'channel_6': 6, 'channel_1': 1, 'channel_3': 3, 'channel_2': 2, 'channel_161': 37, 'channel_149': 34, 'channel_9': 9, 'channel_8': 8, 'channel_64': 22, 'channel_124': 29, 'channel_40': 16, 'channel_60': 21, 'channel_44': 17, 'channel_48': 18, 'channel_140': 33, 'channel_120': 28, 'channel_112': 26, 'channel_116': 27, 'channel_136': 32, 'channel_132': 31, 'channel_157': 36, 'channel_153': 35, 'channel_36': 15, 'channel_11': 11, 'channel_10': 10, 'channel_13': 13, 'channel_12': 12. |
| fastRoamingThreshold | 1.3.6.1.4.1.8691.2.13.1.3.4.3.7 | integer | read-write |
Roaming threshold of fast roaming |
| fastRoamingDifference | 1.3.6.1.4.1.8691.2.13.1.3.4.3.8 | integer | read-write |
Roaming difference of fast roaming |
| wlanLogSetting | 1.3.6.1.4.1.8691.2.13.1.3.5 | |||
| wlanLogEnable | 1.3.6.1.4.1.8691.2.13.1.3.5.1 | integer | read-write |
Enable or disable WLAN log Enumeration: 'enable': 1, 'disable': 0. |
| advancedSetting | 1.3.6.1.4.1.8691.2.13.1.3.6 | |||
| gratuitousArp | 1.3.6.1.4.1.8691.2.13.1.3.6.1 | integer | read-write |
Enable or disable the gratuitous ARP function. For some applications, users need the NPort W2x50A series device server to send broadcast packets to update the ARP table on the server. If the customer enables this function and sets the send period, the NPort W2x50A series device server will send broadcast packets periodically. Enumeration: 'enable': 1, 'disable': 0. |
| gratuitousArpSendPeriod | 1.3.6.1.4.1.8691.2.13.1.3.6.2 | integer | read-write |
The send period of the gratuitous ARP function. Range: 10 ~ 1000 sec. |
| gratuitousArpIpAddress1 | 1.3.6.1.4.1.8691.2.13.1.3.6.3 | displaystring | read-write |
The IP address of the static gratuitous ARP. |
| gratuitousArpMacAddress1 | 1.3.6.1.4.1.8691.2.13.1.3.6.4 | displaystring | read-write |
The MAC address of the static gratuitous ARP. |
| gratuitousArpIpAddress2 | 1.3.6.1.4.1.8691.2.13.1.3.6.5 | displaystring | read-write |
The IP address of the static gratuitous ARP. |
| gratuitousArpMacAddress2 | 1.3.6.1.4.1.8691.2.13.1.3.6.6 | displaystring | read-write |
The MAC address of the static gratuitous ARP. |
| gratuitousArpIpAddress3 | 1.3.6.1.4.1.8691.2.13.1.3.6.7 | displaystring | read-write |
The IP address of the static gratuitous ARP. |
| gratuitousArpMacAddress3 | 1.3.6.1.4.1.8691.2.13.1.3.6.8 | displaystring | read-write |
The MAC address of the static gratuitous ARP. |
| gratuitousArpIpAddress4 | 1.3.6.1.4.1.8691.2.13.1.3.6.9 | displaystring | read-write |
The IP address of the static gratuitous ARP. |
| gratuitousArpMacAddress4 | 1.3.6.1.4.1.8691.2.13.1.3.6.10 | displaystring | read-write |
The MAC address of the static gratuitous ARP. |
| portSetting | 1.3.6.1.4.1.8691.2.13.1.4 | |||
| opModeSetting | 1.3.6.1.4.1.8691.2.13.1.4.1 | |||
| opMode | 1.3.6.1.4.1.8691.2.13.1.4.1.1 | |||
| opModePortTable | 1.3.6.1.4.1.8691.2.13.1.4.1.1.1 | no-access |
The serial ports' operation mode table. |
|
| 1.3.6.1.4.1.8691.2.13.1.4.1.1.1.1 | no-access |
The serial port's operation mode entry. |
||
| portIndex | 1.3.6.1.4.1.8691.2.13.1.4.1.1.1.1.1 | integer | read-only |
The serial port index. |
| portMode | 1.3.6.1.4.1.8691.2.13.1.4.1.1.1.1.2 | integer | read-write |
The operation mode of the serial port. Note that changing this setting may also change the application. Enumeration: 'ethernet-modem': 12, 'tcp-Client': 13, 'pair-connection-slave': 0, 'real-Com': 2, 'tcp-Server': 10, 'udp': 14, 'disable': 7, 'rfc-2217': 20, 'pair-connection-master': 1, 'reverse-Terminal': 21. |
| opModeParam | 1.3.6.1.4.1.8691.2.13.1.4.1.2 | |||
| realCOM | 1.3.6.1.4.1.8691.2.13.1.4.1.2.1 | |||
| realCOMTable | 1.3.6.1.4.1.8691.2.13.1.4.1.2.1.1 | no-access |
The Real COM mode table. |
|
| 1.3.6.1.4.1.8691.2.13.1.4.1.2.1.1.1 | no-access |
The Real COM mode entry. |
||
| realCOMTcpAliveCheck | 1.3.6.1.4.1.8691.2.13.1.4.1.2.1.1.1.1 | integer | read-write |
The TCP alive check time. 0 min: TCP connection will not be closed when the TCP connection is idle. 1 to 99 min: The NPort W2x50A series device server automatically closes the TCP connection if there is no TCP activity for the given time. After the connection is closed, the NPort W2x50A series device server starts listening for another Real COM driver Connection. |
| realCOMMaxConnection | 1.3.6.1.4.1.8691.2.13.1.4.1.2.1.1.1.2 | integer | read-write |
Max connection is usually used when the user needs to receive data from different hosts simultaneously. The factory default is 1. In this case, only one specific host can access this port of the NPort W2x50A series device server, and the Real COM driver on that host will have full control over the port. Max. connection = 1: Allows only a single host's Real COM driver to open the specific NPort W2x50A series device server's serial port. Max connection = 2 to 8: Allows 2 to 8 hosts' Real COM drivers to open the specific NPort W2x50A series device server's serial port, at the same time. When multiple hosts' Real COM drivers open the serial port at the same time, the COM driver only provides a pure data tunnel without control ability. The serial port parameter will use the firmware settings instead of getting the settings from your application program (AP). |
| realCOMIgnoreJammedIp | 1.3.6.1.4.1.8691.2.13.1.4.1.2.1.1.1.3 | integer | read-write |
Previously, when Max connection was set to a value greater than 1, and the serial device was transmitting data, if any one of the connected hosts stopped responding, the serial device would wait until the data had been transmitted successfully before transmitting the second group of data to all hosts. Currently, if you select Yes for 'Ignore jammed IP,' the host that is not responding will be ignored, but the data will still be transmitted to the other hosts. Enumeration: 'enable': 1, 'disable': 0. |
| realCOMAllowDriverControl | 1.3.6.1.4.1.8691.2.13.1.4.1.2.1.1.1.4 | integer | read-write |
If Max connection is greater than 1, NPort will ignore driver control commands from all connected hosts. However, if you set Allow driver control to YES, control commands will be accepted. Note that since the NPort W2x50A series device server may get configuration changes from multiple hosts, the most recent command received will take precedence. Enumeration: 'enable': 1, 'disable': 0. |
| realCOMConnectionDownRTS | 1.3.6.1.4.1.8691.2.13.1.4.1.2.1.1.1.5 | integer | read-write |
For some applications, serial devices must obtain the Ethernet link status by reading the RTS signal from the NPort W2x50A series device server. If this setting is set to 'always low,' RTS will change its state to low if the Ethernet link is off. Enumeration: 'always-low': 1, 'always-high': 0. |
| realCOMConnectionDownDTR | 1.3.6.1.4.1.8691.2.13.1.4.1.2.1.1.1.6 | integer | read-write |
For some applications, serial devices must obtain the Ethernet link status by reading the DTR signal from the NPort W2x50A series device server. If this setting is set to 'always low,' DTR will change its state to low if the Ethernet link is off. Enumeration: 'always-low': 1, 'always-high': 0. |
| rfc2217 | 1.3.6.1.4.1.8691.2.13.1.4.1.2.2 | |||
| rfc2217Table | 1.3.6.1.4.1.8691.2.13.1.4.1.2.2.1 | no-access |
The RFC2217 mode table. |
|
| 1.3.6.1.4.1.8691.2.13.1.4.1.2.2.1.1 | no-access |
The RFC2217 mode entry. |
||
| rfc2217TcpAliveCheck | 1.3.6.1.4.1.8691.2.13.1.4.1.2.2.1.1.1 | integer | read-write |
The TCP alive check time. 0 min: TCP connection will not be closed when the TCP connection is idle. 1 to 99 min: The NPort W2x50A series device server automatically closes the TCP connection if there is no TCP activity for the given time. After the connection is closed, the NPort W2x50A series device server starts listening for another TCP Connection. |
| rfc2217TcpPort | 1.3.6.1.4.1.8691.2.13.1.4.1.2.2.1.1.2 | integer | read-write |
TCP server port of RFC2217. |
| tcpServer | 1.3.6.1.4.1.8691.2.13.1.4.1.2.3 | |||
| tcpServerTable | 1.3.6.1.4.1.8691.2.13.1.4.1.2.3.1 | no-access |
The TCP server mode table. |
|
| 1.3.6.1.4.1.8691.2.13.1.4.1.2.3.1.1 | no-access |
The TCP server mode entry. |
||
| tcpServerTcpAliveCheck | 1.3.6.1.4.1.8691.2.13.1.4.1.2.3.1.1.1 | integer | read-write |
The TCP alive check time. 0 min: TCP connection will not be closed when the TCP connection is idle. 1 to 99 min: The NPort W2x50A series device server automatically closes the TCP connection if there is no TCP activity for the given time. After the connection is closed, the NPort W2x50A series device server starts listening for another TCP Connection. |
| tcpServerInactivityTime | 1.3.6.1.4.1.8691.2.13.1.4.1.2.3.1.1.2 | integer | read-write |
0 ms: TCP connection is not closed when the serial line is idle. 1-65535 ms: The NPort W2x50A series device server automatically closes the TCP connection if there is no serial data activity for the given time. After the connection is closed, the NPort W2x50A series device server starts listening for another TCP connection. |
| tcpServerMaxConnection | 1.3.6.1.4.1.8691.2.13.1.4.1.2.3.1.1.3 | integer | read-write |
Max connection is usually used when the user needs to receive data from different hosts simultaneously. The factory default is 1. In this case, only one specific host can access this port of the NPort W2x50A series device server, and the TCP server driver on that host will have full control over the port. Max. connection 1: Allows only a single host's to connect specific NPort W2x50A series device Max connection 2 to 8: Allows 2 to 8 hosts' to conncect NPort W2x50A series device at the same time. |
| tcpServerIgnoreJammedIp | 1.3.6.1.4.1.8691.2.13.1.4.1.2.3.1.1.4 | integer | read-write |
Previously, when Max connection was set to a value greater than 1, and the serial device was transmitting data, if any one of the connected hosts stopped responding, the serial device would wait until the data had been transmitted successfully before transmitting the second group of data to all hosts. Currently, if you select Yes for 'Ignore jammed IP,' the host that is not responding will be ignored, but the data will still be transmitted to the other hosts. Enumeration: 'enable': 1, 'disable': 0. |
| tcpServerAllowDriverControl | 1.3.6.1.4.1.8691.2.13.1.4.1.2.3.1.1.5 | integer | read-write |
If Max connection is greater than 1, NPort will ignore driver control commands from all connected hosts. However, if you set Allow driver control to YES, control commands will be accepted. Note that since the NPort W2x50A series device server may get configuration changes from multiple hosts, the most recent command received will take precedence. Enumeration: 'enable': 1, 'disable': 0. |
| tcpServerTcpPort | 1.3.6.1.4.1.8691.2.13.1.4.1.2.3.1.1.6 | integer | read-write |
The 'TCP port' is the TCP port that the NPort W2x50A series device server uses to listen to connections, and that other devices must use to contact the NPort W2x50A series device server. |
| tcpServerCmdPort | 1.3.6.1.4.1.8691.2.13.1.4.1.2.3.1.1.7 | integer | read-write |
The 'Command port' is a TCP port used to listen for SSDK commands from the host. In order to prevent a TCP port conflict with other applications, the user can set the Command port to another port if needed. |
| tcpServerConnectionDownRTS | 1.3.6.1.4.1.8691.2.13.1.4.1.2.3.1.1.8 | integer | read-write |
For some applications, serial devices must obtain the Ethernet link status from the RTS signal sent by the NPort W2x50A series device server. If this setting is set to 'goes low,' RTS will change the state to low if the Ethernet link is off. Enumeration: 'always-low': 1, 'always-high': 0. |
| tcpServerConnectionDownDTR | 1.3.6.1.4.1.8691.2.13.1.4.1.2.3.1.1.9 | integer | read-write |
For some applications, serial devices must obtain the Ethernet link status from the DTR signal sent by the NPort W2x50A series device server. If this setting is set to 'goes low,' DTR will change the state to low if the Ethernet link is off. Enumeration: 'always-low': 1, 'always-high': 0. |
| tcpClient | 1.3.6.1.4.1.8691.2.13.1.4.1.2.4 | |||
| tcpClientTable | 1.3.6.1.4.1.8691.2.13.1.4.1.2.4.1 | no-access |
The TCP client mode table. |
|
| 1.3.6.1.4.1.8691.2.13.1.4.1.2.4.1.1 | no-access |
The TCP client mode entry. |
||
| tcpClientTcpAliveCheck | 1.3.6.1.4.1.8691.2.13.1.4.1.2.4.1.1.1 | integer | read-write |
The TCP alive check time. 0 min: TCP connection will not be closed when the TCP connection is idle. 1 to 99 min: The NPort W2x50A series device client automatically closes the TCP connection if there is no TCP activity for the given time. |
| tcpClientInactivityTime | 1.3.6.1.4.1.8691.2.13.1.4.1.2.4.1.1.2 | integer | read-write |
0 ms: TCP connection is not closed when the serial line is idle. 1-65535 ms: The NPort W2x50A series device client automatically closes the TCP connection if there is no serial data activity for the given time. |
| tcpClientIgnoreJammedIp | 1.3.6.1.4.1.8691.2.13.1.4.1.2.4.1.1.3 | integer | read-write |
Previously, when Max connection was set to a value greater than 1, and the serial device was transmitting data, if any one of the connected hosts stopped responding, the serial device would wait until the data had been transmitted successfully before transmitting the second group of data to all hosts. Currently, if you select Yes for 'Ignore jammed IP,' the host that is not responding will be ignored, but the data will still be transmitted to the other hosts. Enumeration: 'enable': 1, 'disable': 0. |
| tcpClientDestinationAddress1 | 1.3.6.1.4.1.8691.2.13.1.4.1.2.4.1.1.4 | displaystring | read-write |
The NPort W2x50A series device server can connect actively to a remote host that has this IP address. |
| tcpClientDestinationPort1 | 1.3.6.1.4.1.8691.2.13.1.4.1.2.4.1.1.5 | integer | read-write |
The NPort W2x50A series device server can connect actively to a remote host that has this TCP port number. |
| tcpClientDestinationAddress2 | 1.3.6.1.4.1.8691.2.13.1.4.1.2.4.1.1.6 | displaystring | read-write |
The NPort W2x50A series device server can connect actively to a remote host that has this IP address. |
| tcpClientDestinationPort2 | 1.3.6.1.4.1.8691.2.13.1.4.1.2.4.1.1.7 | integer | read-write |
The NPort W2x50A series device server can connect actively to a remote host that has this TCP port number. |
| tcpClientDestinationAddress3 | 1.3.6.1.4.1.8691.2.13.1.4.1.2.4.1.1.8 | displaystring | read-write |
The NPort W2x50A series device server can connect actively to a remote host that has this IP address. |
| tcpClientDestinationPort3 | 1.3.6.1.4.1.8691.2.13.1.4.1.2.4.1.1.9 | integer | read-write |
The NPort W2x50A series device server can connect actively to a remote host that has this port number. |
| tcpClientDestinationAddress4 | 1.3.6.1.4.1.8691.2.13.1.4.1.2.4.1.1.10 | displaystring | read-write |
The NPort W2x50A series device server can connect actively to a remote host that has this IP address. |
| tcpClientDestinationPort4 | 1.3.6.1.4.1.8691.2.13.1.4.1.2.4.1.1.11 | integer | read-write |
The NPort W2x50A series device server can connect actively to a remote host that has this port number. |
| tcpClientDesignatedLocalPort1 | 1.3.6.1.4.1.8691.2.13.1.4.1.2.4.1.1.12 | integer | read-write |
The local TCP port used to connect actively to the remote host. |
| tcpClientDesignatedLocalPort2 | 1.3.6.1.4.1.8691.2.13.1.4.1.2.4.1.1.13 | integer | read-write |
The local TCP port used to connect actively to the remote host. |
| tcpClientDesignatedLocalPort3 | 1.3.6.1.4.1.8691.2.13.1.4.1.2.4.1.1.14 | integer | read-write |
The local TCP port used to connect actively to the remote host. |
| tcpClientDesignatedLocalPort4 | 1.3.6.1.4.1.8691.2.13.1.4.1.2.4.1.1.15 | integer | read-write |
The local TCP port used to connect actively to the remote host. |
| tcpClientConnectionControl | 1.3.6.1.4.1.8691.2.13.1.4.1.2.4.1.1.16 | integer | read-write |
Events that cause the TCP client to drop the connection. Enumeration: 'dcdOn-None': 264, 'dsrOn-None': 260, 'dcdOn-DCD-Off': 2056, 'anyCharacter-None': 258, 'anyCharacter-InactivityTime': 514, 'dsrOn-DSR-Off': 1028, 'startup-None': 257. |
| udp | 1.3.6.1.4.1.8691.2.13.1.4.1.2.5 | |||
| udpTable | 1.3.6.1.4.1.8691.2.13.1.4.1.2.5.1 | no-access |
The UDP mode table. |
|
| 1.3.6.1.4.1.8691.2.13.1.4.1.2.5.1.1 | no-access |
The UDP mode entry. |
||
| udpDestinationAddress1Begin | 1.3.6.1.4.1.8691.2.13.1.4.1.2.5.1.1.1 | ipaddress | read-write |
The NPort W2x50A series device server can actively send UDP packets to remote hosts whose IP addresses are in the range between this parameter and udpDestinationAddress1End. |
| udpDestinationAddress1End | 1.3.6.1.4.1.8691.2.13.1.4.1.2.5.1.1.2 | ipaddress | read-write |
The NPort W2x50A series device server can actively send UDP packets to remote hosts whose IP addresses are in the range between udpDestinationAddress1Begin and this parameter. |
| udpDestinationPort1 | 1.3.6.1.4.1.8691.2.13.1.4.1.2.5.1.1.3 | integer | read-write |
The NPort W2x50A series device server can actively send UDP packets to remote hosts that have this UDP port number. |
| udpDestinationAddress2Begin | 1.3.6.1.4.1.8691.2.13.1.4.1.2.5.1.1.4 | ipaddress | read-write |
The NPort W2x50A series device server can actively send UDP packets to remote hosts whose IP addresses are in the range between this parameter and udpDestinationAddress2End. |
| udpDestinationAddress2End | 1.3.6.1.4.1.8691.2.13.1.4.1.2.5.1.1.5 | ipaddress | read-write |
The NPort W2x50A series device server can actively send UDP packets to the remote hosts whose IP addresses are in the range between udpDestinationAddress2Begin and this parameter. |
| udpDestinationPort2 | 1.3.6.1.4.1.8691.2.13.1.4.1.2.5.1.1.6 | integer | read-write |
The NPort W2x50A series device server can actively send UDP packets to the remote hosts that have this UDP port number. |
| udpDestinationAddress3Begin | 1.3.6.1.4.1.8691.2.13.1.4.1.2.5.1.1.7 | ipaddress | read-write |
The NPort W2x50A series device server can actively send UDP packets to remote hosts whose IP addresses are in the range between this parameter and udpDestinationAddress3End. |
| udpDestinationAddress3End | 1.3.6.1.4.1.8691.2.13.1.4.1.2.5.1.1.8 | ipaddress | read-write |
The NPort W2x50A series device server can actively send UDP packets to remote hosts whose IP addresses are in the range between udpDestinationAddress3Begin and this parameter. |
| udpDestinationPort3 | 1.3.6.1.4.1.8691.2.13.1.4.1.2.5.1.1.9 | integer | read-write |
The NPort W2x50A series device server can actively send UDP packets to remote hosts that have this UDP port number. |
| udpDestinationAddress4Begin | 1.3.6.1.4.1.8691.2.13.1.4.1.2.5.1.1.10 | ipaddress | read-write |
The NPort W2x50A series device server can actively send UDP packets to remote hosts whose IP addresses are in the range between this parameter and udpDestinationAddress4End. |
| udpDestinationAddress4End | 1.3.6.1.4.1.8691.2.13.1.4.1.2.5.1.1.11 | ipaddress | read-write |
The NPort W2x50A series device server can actively send UDP packets to remote hosts whose IP addresses are in the range between udpDestinationAddress4Begin and this parameter. |
| udpDestinationPort4 | 1.3.6.1.4.1.8691.2.13.1.4.1.2.5.1.1.12 | integer | read-write |
The NPort W2x50A series device server can actively send UDP packets to remote hosts that have this UDP port number. |
| udpLocalListenPort | 1.3.6.1.4.1.8691.2.13.1.4.1.2.5.1.1.13 | integer | read-write |
The UDP port that the NPort W2x50A series device server listens to and that other devices must use to contact the NPort W2x50A series device server. |
| pairConnectionMaster | 1.3.6.1.4.1.8691.2.13.1.4.1.2.6 | |||
| pairConnectionMasterTable | 1.3.6.1.4.1.8691.2.13.1.4.1.2.6.1 | no-access |
The pair connection master mode table. |
|
| 1.3.6.1.4.1.8691.2.13.1.4.1.2.6.1.1 | no-access |
The pair connection master mode entry. |
||
| pairConnectionMasterTcpAliveCheck | 1.3.6.1.4.1.8691.2.13.1.4.1.2.6.1.1.1 | integer | read-write |
The TCP alive check time. 0 min: TCP connection will not be closed when the TCP connection is idle. 1 to 99 min: The NPort W2x50A series device server automatically closes the TCP connection if there is no TCP activity for the given time. After the connection is closed, the NPort W2x50A series device server starts connecting again. |
| pairConnectionMasterDestnationAddress | 1.3.6.1.4.1.8691.2.13.1.4.1.2.6.1.1.2 | displaystring | read-write |
IP address of pair connection slave. |
| pairConnectionMasterDestnationTcpPort | 1.3.6.1.4.1.8691.2.13.1.4.1.2.6.1.1.3 | integer | read-write |
TCP port of pair connection slave. |
| pairConnectionSlave | 1.3.6.1.4.1.8691.2.13.1.4.1.2.7 | |||
| pairConnectionSlaveTable | 1.3.6.1.4.1.8691.2.13.1.4.1.2.7.1 | no-access |
The pair connection slave mode table. |
|
| 1.3.6.1.4.1.8691.2.13.1.4.1.2.7.1.1 | no-access |
The pair connection slave mode entry. |
||
| pairConnectionSlaveTcpAliveCheck | 1.3.6.1.4.1.8691.2.13.1.4.1.2.7.1.1.1 | integer | read-write |
The TCP alive check time. 0 min: TCP connection will not be closed when the TCP connection is idle. 1 to 99 min: The NPort W2x50A series device server automatically closes the TCP connection if there is no TCP activity for the given time. After the connection is closed, the NPort W2x50A series device server starts listening for another TCP Connection. |
| pairConnectionSlaveLocalTcpPort | 1.3.6.1.4.1.8691.2.13.1.4.1.2.7.1.1.2 | integer | read-write |
TCP server port of pair connection slave. |
| ethernetModem | 1.3.6.1.4.1.8691.2.13.1.4.1.2.8 | |||
| ethernetModemTable | 1.3.6.1.4.1.8691.2.13.1.4.1.2.8.1 | no-access |
The ethernet modem mode table. |
|
| 1.3.6.1.4.1.8691.2.13.1.4.1.2.8.1.1 | no-access |
The ethernet modem mode entry. |
||
| ethernetModemTcpAliveCheck | 1.3.6.1.4.1.8691.2.13.1.4.1.2.8.1.1.1 | integer | read-write |
The TCP alive check time. 0 min: TCP connection will not be closed when the TCP connection is idle. 1 to 99 min: The NPort W2x50A series device server automatically closes the TCP connection if there is no TCP activity for the given time. |
| ethernetModemLocalTcpPort | 1.3.6.1.4.1.8691.2.13.1.4.1.2.8.1.1.2 | integer | read-write |
TCP server port of ethernet modem. |
| reverseTerminal | 1.3.6.1.4.1.8691.2.13.1.4.1.2.9 | |||
| reverseTerminalTable | 1.3.6.1.4.1.8691.2.13.1.4.1.2.9.1 | no-access |
The reverse terminal mode table. |
|
| 1.3.6.1.4.1.8691.2.13.1.4.1.2.9.1.1 | no-access |
The reverse terminal mode entry. |
||
| reverseTerminalTcpAliveCheck | 1.3.6.1.4.1.8691.2.13.1.4.1.2.9.1.1.1 | integer | read-write |
The TCP alive check time. 0 min: TCP connection will not be closed when the TCP connection is idle. 1 to 99 min: The NPort W2x50A series device server automatically closes the TCP connection if there is no TCP activity for the given time. |
| reverseTerminalInactivityTime | 1.3.6.1.4.1.8691.2.13.1.4.1.2.9.1.1.2 | integer | read-write |
0 min: TCP connection is not closed when the serial line is idle. 0-99 min: The NPort W2x50A series device server automatically closes the TCP connection if there is no serial data activity for the given time. After the connection is closed, the NPort W2x50P series device server starts listening for another TCP connection. |
| reverseTerminalTcpPort | 1.3.6.1.4.1.8691.2.13.1.4.1.2.9.1.1.3 | integer | read-write |
Each of the NPort W2x50A series device server's serial ports are mapped to a TCP port. |
| reverseTerminalAuthenticationType | 1.3.6.1.4.1.8691.2.13.1.4.1.2.9.1.1.4 | integer | read-write |
The reverse terminal authentication type. Enumeration: 'radius': 2, 'none': 0, 'local': 1. |
| reverseTerminalMapKeys | 1.3.6.1.4.1.8691.2.13.1.4.1.2.9.1.1.5 | integer | read-write |
If data received through NPort W2x50A series device server's Ethernet port is sent using the 'enter' command, the data will be transmitted out through the serial port with an added 1. 'carriage return + line feed' if you select the 'cr-lf' option (i.e., the cursor will jump to the next line, and return to the first character of the line) 2. 'carriage return' if you select the 'cr' option (i.e., the cursor will return to the first character of the line 3. 'line feed' if you select the 'lf' option. (i.e., the cursor will jump to the next line, but not move horizontally) Enumeration: 'lf': 2, 'cr': 1, 'cr-lf': 0. |
| dataPacking | 1.3.6.1.4.1.8691.2.13.1.4.1.3 | |||
| dataPackingPortTable | 1.3.6.1.4.1.8691.2.13.1.4.1.3.1 | no-access |
The Data Packing table. |
|
| 1.3.6.1.4.1.8691.2.13.1.4.1.3.1.1 | no-access |
The Data Packing entry. |
||
| portPacketLength | 1.3.6.1.4.1.8691.2.13.1.4.1.3.1.1.1 | integer | read-write |
If the value is 0, the Delimiter Process will be used, regardless of the length of the data packet. If the data length (in bytes) matches the configured value, the data will be forced out. The data length can be configured from 0 to 1024 bytes. Set to 0 if you do not need to limit the length. |
| portDelimiter1Enable | 1.3.6.1.4.1.8691.2.13.1.4.1.3.1.1.2 | integer | read-write |
Enable the first delimiter character. Enumeration: 'enable': 1, 'disable': 0. |
| portDelimiter1 | 1.3.6.1.4.1.8691.2.13.1.4.1.3.1.1.3 | displaystring | read-write |
The first delimiter character, in hex decimal. |
| portDelimiter2Enable | 1.3.6.1.4.1.8691.2.13.1.4.1.3.1.1.4 | integer | read-write |
Enable the second delimiter character. Enumeration: 'enable': 1, 'disable': 0. |
| portDelimiter2 | 1.3.6.1.4.1.8691.2.13.1.4.1.3.1.1.5 | displaystring | read-write |
The second delimiter character, in hex decimal. |
| portDelimiterProcess | 1.3.6.1.4.1.8691.2.13.1.4.1.3.1.1.6 | integer | read-write |
'delimiterAddOne' or 'delimiterAddTwo': The data will be transmitted when an additional byte (for 'delimiterAddOne'), or an additional 2 bytes (for 'delimiterAddTwo') of data is received after receiving the Delimiter. 'stripDelimiter': When the delimiter is received, the Delimiter is deleted (i.e., stripped), and the remaining data is transmitted. 'doNothing': The data will be transmitted when the delimiter is received. Enumeration: 'delimiterAddTwo': 4, 'stripDelimiter': 8, 'doNothing': 1, 'delimiterAddOne': 2. |
| portForceTransmit | 1.3.6.1.4.1.8691.2.13.1.4.1.3.1.1.7 | integer | read-write |
0: Disable the force transmit timeout. 1 to 65535: Forces the NPort W2x50A series device server's TCP/IP protocol software to try to pack serial data received during the specified time into the same data frame. |
| comParamSetting | 1.3.6.1.4.1.8691.2.13.1.4.2 | |||
| comParamPortTable | 1.3.6.1.4.1.8691.2.13.1.4.2.1 | no-access |
The Communication Parameters table. |
|
| 1.3.6.1.4.1.8691.2.13.1.4.2.1.1 | no-access |
The Communication Parameters entry. |
||
| portAlias | 1.3.6.1.4.1.8691.2.13.1.4.2.1.1.1 | displaystring | read-write |
Port alias is included to allow easy identification of the serial devices that are connected to NPort W2x50A series device server's serial port. |
| portInterface | 1.3.6.1.4.1.8691.2.13.1.4.2.1.1.2 | integer | read-write |
The serial interface that the port works on. Enumeration: 'rs-422': 1, 'rs-232': 0, 'rs-485-2wire': 2, 'rs-485-4wire': 3. |
| portBaudRate | 1.3.6.1.4.1.8691.2.13.1.4.2.1.1.3 | integer | read-write |
The port's speed in bits per second. You can choose a standard baud rate by indexing. Enumeration: 'b1800': 8, 'b150': 4, 'b75': 1, 'b9600': 12, 'b110': 2, 'b50': 0, 'b2400': 9, 'b38400': 14, 'b19200': 13, 'b134': 3, 'b460800': 18, 'b600': 6, 'b921600': 19, 'b115200': 16, 'b300': 5, 'b57600': 15, 'b4800': 10, 'b230400': 17, 'b1200': 7. |
| portDataBits | 1.3.6.1.4.1.8691.2.13.1.4.2.1.1.4 | integer | read-write |
The number of bits in a character for the port. Enumeration: 'bits-8': 3, 'bits-5': 0, 'bits-7': 2, 'bits-6': 1. |
| portStopBits | 1.3.6.1.4.1.8691.2.13.1.4.2.1.1.5 | integer | read-write |
The number of stop bits for the port. Enumeration: 'bits-1': 0, 'bits-2': 2, 'bits-1dot5': 1. |
| portParity | 1.3.6.1.4.1.8691.2.13.1.4.2.1.1.6 | integer | read-write |
The parity bit for the port. Enumeration: 'even': 3, 'none': 0, 'space': 7, 'odd': 1, 'mark': 5. |
| portFlowControl | 1.3.6.1.4.1.8691.2.13.1.4.2.1.1.7 | integer | read-write |
The flow-control method for the port. Enumeration: 'none': 0, 'xon-xoff': 2, 'rts-cts': 1. |
| portFIFO | 1.3.6.1.4.1.8691.2.13.1.4.2.1.1.8 | integer | read-write |
Enable or disable the port's FIFO. Enumeration: 'enable': 1, 'disable': 0. |
| dataBuffering | 1.3.6.1.4.1.8691.2.13.1.4.3 | |||
| dataBufferingPortTable | 1.3.6.1.4.1.8691.2.13.1.4.3.1 | no-access |
The Data Buffering table. |
|
| 1.3.6.1.4.1.8691.2.13.1.4.3.1.1 | no-access |
The Data Buffering entry. |
||
| portBufferingEnable | 1.3.6.1.4.1.8691.2.13.1.4.3.1.1.1 | integer | read-write |
Enable off-line port buffering. Enumeration: 'enable': 1, 'disable': 0. |
| portSerialDataLoggingEnable | 1.3.6.1.4.1.8691.2.13.1.4.3.1.1.2 | integer | read-write |
Enable or disable serial data logging for the port. Enumeration: 'enable': 1, 'disable': 0. |
| sysManagement | 1.3.6.1.4.1.8691.2.13.1.5 | |||
| miscNetworkSettings | 1.3.6.1.4.1.8691.2.13.1.5.1 | |||
| accessibleIp | 1.3.6.1.4.1.8691.2.13.1.5.1.1 | |||
| enableAccessibleIpList | 1.3.6.1.4.1.8691.2.13.1.5.1.1.1 | integer | read-write |
Enable or disable the entire accessible IP list. Enumeration: 'enable': 1, 'disable': 0. |
| accessibleIpListTable | 1.3.6.1.4.1.8691.2.13.1.5.1.1.2 | no-access |
Accessible IP List table. |
|
| 1.3.6.1.4.1.8691.2.13.1.5.1.1.2.1 | no-access |
Accessible IP List entry. |
||
| accessibleIpListIndex | 1.3.6.1.4.1.8691.2.13.1.5.1.1.2.1.1 | integer | read-only |
Accessible IP List index. |
| activeAccessibleIpList | 1.3.6.1.4.1.8691.2.13.1.5.1.1.2.1.2 | integer | read-write |
Enable or disable this accessible IP entry. Enumeration: 'enable': 1, 'disable': 0. |
| accessibleIpListAddress | 1.3.6.1.4.1.8691.2.13.1.5.1.1.2.1.3 | ipaddress | read-write |
Accessible IP address. This value can be the IP address of a single host if the netmask is set to '255.255.255.255,' or it can be a network address. |
| accessibleIpListNetmask | 1.3.6.1.4.1.8691.2.13.1.5.1.1.2.1.4 | ipaddress | read-write |
Accessible IP address netmask. The IP address and netmask are used to specify a group of remote hosts. |
| snmpAgentSettings | 1.3.6.1.4.1.8691.2.13.1.5.1.2 | |||
| snmpEnable | 1.3.6.1.4.1.8691.2.13.1.5.1.2.1 | integer | read-write |
Enable or disable SNMP agent. Enumeration: 'enable': 1, 'disable': 0. |
| snmpContactName | 1.3.6.1.4.1.8691.2.13.1.5.1.2.2 | displaystring | read-write |
The SNMP contact information usually includes an emergency contact name and telephone or pager number. |
| snmpLocation | 1.3.6.1.4.1.8691.2.13.1.5.1.2.3 | displaystring | read-write |
Specify the location string for SNMP agents, such as the NPort W2x50A series device server. This string is usually set to the street address where the NPort W2x50A series device server is physically located. |
| authenticationServer | 1.3.6.1.4.1.8691.2.13.1.5.1.4 | |||
| radiusServerIp | 1.3.6.1.4.1.8691.2.13.1.5.1.4.1 | displaystring | read-write |
The IP address or domain name of the RADIUS server. |
| udpPortAuthenticationServer | 1.3.6.1.4.1.8691.2.13.1.5.1.4.3 | integer | read-write |
The UDP port of the RADIUS server. Enumeration: 'port1645': 1645, 'port1812': 1812. |
| radiusAccounting | 1.3.6.1.4.1.8691.2.13.1.5.1.4.4 | integer | read-write |
Enable or disable RADIUS accounting. Enumeration: 'enable': 1, 'disable': 0. |
| sysLogSettings | 1.3.6.1.4.1.8691.2.13.1.5.1.5 | |||
| sysLocalLog | 1.3.6.1.4.1.8691.2.13.1.5.1.5.1 | integer | read-write |
System cold start, System warm start. Enumeration: 'enable': 1, 'disable': 0. |
| networkLocalLog | 1.3.6.1.4.1.8691.2.13.1.5.1.5.2 | integer | read-write |
DHCP/BOOTP get IP/renew, mail fail, NTP connect fail, IP conflict, network link down. Enumeration: 'enable': 1, 'disable': 0. |
| configLocalLog | 1.3.6.1.4.1.8691.2.13.1.5.1.5.3 | integer | read-write |
Login fail, IP changed, password changed, firmware upgrade, SSL certificate import, config export, wireless certificate import, serial data log export. Enumeration: 'enable': 1, 'disable': 0. |
| opModeLocalLog | 1.3.6.1.4.1.8691.2.13.1.5.1.5.4 | integer | read-write |
Connect, Disconnect, Restart. Enumeration: 'enable': 1, 'disable': 0. |
| autoWarningSettings | 1.3.6.1.4.1.8691.2.13.1.5.2 | |||
| eventSettings | 1.3.6.1.4.1.8691.2.13.1.5.2.1 | |||
| mailWarningColdStart | 1.3.6.1.4.1.8691.2.13.1.5.2.1.1 | integer | read-write |
Refers to starting the system from power off (contrast this with warm start). When performing a cold start, the NPort W2x50A series device server will automatically issue an auto warning message by e-mail after booting up. Enumeration: 'enable': 1, 'disable': 0. |
| mailWarningWarmStart | 1.3.6.1.4.1.8691.2.13.1.5.2.1.2 | integer | read-write |
Refers to restarting the NPort W2x50A without turning the power off. When performing a warm start, the NPort W2x50A series device server will automatically send an e-mail after rebooting. Enumeration: 'enable': 1, 'disable': 0. |
| mailWarningAuthFailure | 1.3.6.1.4.1.8691.2.13.1.5.2.1.3 | integer | read-write |
The user inputs a wrong password from the Console or Administrator. When authentication failure occurs, the NPort W2x50A series device server will immediately send an e-mail. Enumeration: 'enable': 1, 'disable': 0. |
| mailWarningIpChanged | 1.3.6.1.4.1.8691.2.13.1.5.2.1.4 | integer | read-write |
The user has changed the NPort W2x50A series device server's IP address. When the IP address changes,the NPort W2x50A series device server will send an e-mail with the new IP address before it reboots. If the NPort W2x50A series device server is unable to send an e-mail message to the mail server within 15 seconds, it will reboot anyway, and abort the e-mail auto warning. Enumeration: 'enable': 1, 'disable': 0. |
| mailWarningPasswordChanged | 1.3.6.1.4.1.8691.2.13.1.5.2.1.5 | integer | read-write |
The user has changed the NPort W2x50A series device server's password. When the password changes, the NPort W2x50A series device server will send an e-mail with the password changed notice before it reboots. If the NPort W2x50A series device server is unable to send an e-mail message to the mail server within 15 seconds, it will reboot anyway, and abort the e-mail auto warning. Enumeration: 'enable': 1, 'disable': 0. |
| trapServerColdStart | 1.3.6.1.4.1.8691.2.13.1.5.2.1.6 | integer | read-write |
Refers to starting the system from power off (contrast this with warm start). When performing a cold start, the NPort W2x50A series device server will automatically issue an auto warning message by sending an SNMP trap after booting up. Enumeration: 'enable': 1, 'disable': 0. |
| trapServerWarmStart | 1.3.6.1.4.1.8691.2.13.1.5.2.1.7 | integer | read-write |
Refers to restarting the NPort W2x50A without turning the power off. When performing a warm start, the NPort W2x50A series device server will automatically send an SNMP trap after rebooting. Enumeration: 'enable': 1, 'disable': 0. |
| trapServerAuthFailure | 1.3.6.1.4.1.8691.2.13.1.5.2.1.8 | integer | read-write |
The user inputs a wrong password from the Console or Administrator. When authentication failure occurs, the NPort W2x50A series device server will immediately send an SNMP trap. Enumeration: 'enable': 1, 'disable': 0. |
| serialEventSettings | 1.3.6.1.4.1.8691.2.13.1.5.2.2 | |||
| portEventSettingsTable | 1.3.6.1.4.1.8691.2.13.1.5.2.2.1 | no-access |
Port Event Settings Table. |
|
| 1.3.6.1.4.1.8691.2.13.1.5.2.2.1.1 | no-access |
Port Event Settings entry. |
||
| mailDCDchange | 1.3.6.1.4.1.8691.2.13.1.5.2.2.1.1.1 | integer | read-write |
A change in the DCD (Data Carrier Detect) signal indicates that the modem connection status has changed. For example, if the DCD signal changes to low, it indicates that the connection line is down. When the DCD signal changes to low, the NPort W2x50A series device server will immediately send an e-mail message. Enumeration: 'enable': 1, 'disable': 0. |
| trapDCDchange | 1.3.6.1.4.1.8691.2.13.1.5.2.2.1.1.2 | integer | read-write |
A change in the DCD (Data Carrier Detect) signal indicates that the modem connection status has changed. For example, if the DCD signal changes to low, it indicates that the connection line is down. When the DCD signal changes to low, the NPort W2x50A series device server will immediately send an SNMP trap. Enumeration: 'enable': 1, 'disable': 0. |
| mailDSRchange | 1.3.6.1.4.1.8691.2.13.1.5.2.2.1.1.3 | integer | read-write |
A change in the DSR (Data Set Ready) signal indicates that the data communication equipment is powered off. For example, if the DSR signal changes to low, it indicates that the data communication equipment is powered down. When the DSR signal changes to low, the NPort W2x50A series device server will immediately send an e-mail message. Enumeration: 'enable': 1, 'disable': 0. |
| trapDSRchange | 1.3.6.1.4.1.8691.2.13.1.5.2.2.1.1.4 | integer | read-write |
A change in the DSR (Data Set Ready) signal indicates that the data communication equipment is powered off. For example, if the DSR signal changes to low, it indicates that the data communication equipment is powered down. When the DSR signal changes to low, the NPort W2x50A series device server will immediately send an SNMP trap. Enumeration: 'enable': 1, 'disable': 0. |
| emailAlert | 1.3.6.1.4.1.8691.2.13.1.5.2.3 | |||
| emailWarningMailServer | 1.3.6.1.4.1.8691.2.13.1.5.2.3.1 | displaystring | read-write |
The e-mail server's IP address or domain name of the e-mail warning function. |
| emailRequiresAuthentication | 1.3.6.1.4.1.8691.2.13.1.5.2.3.2 | integer | read-write |
Set if the mail server requires user login. Enumeration: 'require': 1, 'non-require': 0. |
| emailWarningUserName | 1.3.6.1.4.1.8691.2.13.1.5.2.3.3 | displaystring | read-write |
The user name used to log into the mail server if authentication is required. |
| emailWarningFromEmail | 1.3.6.1.4.1.8691.2.13.1.5.2.3.5 | displaystring | read-write |
The e-mail address to be filled in the 'From' field of the auto-warning e-mail. |
| emailWarningFirstEmailAddr | 1.3.6.1.4.1.8691.2.13.1.5.2.3.6 | displaystring | read-write |
The first email address to where the auto-warning e-mail is to be sent. |
| emailWarningSecondEmailAddr | 1.3.6.1.4.1.8691.2.13.1.5.2.3.7 | displaystring | read-write |
The second email address to where the auto-warning e-mail is to be sent. |
| emailWarningThirdEmailAddr | 1.3.6.1.4.1.8691.2.13.1.5.2.3.8 | displaystring | read-write |
The third email address to where the auto-warning e-mail is to be sent. |
| emailWarningFourthEmailAddr | 1.3.6.1.4.1.8691.2.13.1.5.2.3.9 | displaystring | read-write |
The fourth email address to where the auto-warning e-mail is to be sent. |
| snmpTrap | 1.3.6.1.4.1.8691.2.13.1.5.2.4 | |||
| snmpTrapReceiverIp | 1.3.6.1.4.1.8691.2.13.1.5.2.4.1 | displaystring | read-write |
SNMP trap server IP address or domain name. |
| trapVersion | 1.3.6.1.4.1.8691.2.13.1.5.2.4.2 | integer | read-write |
SNMP trap version used for the auto-warning function. Enumeration: 'v2c': 1, 'v1': 0. |
| maintenance | 1.3.6.1.4.1.8691.2.13.1.5.3 | |||
| consoleSettings | 1.3.6.1.4.1.8691.2.13.1.5.3.1 | |||
| httpConsole | 1.3.6.1.4.1.8691.2.13.1.5.3.1.1 | integer | read-write |
Enable or disable HTTP console. Enumeration: 'enable': 1, 'disable': 0. |
| httpsConsole | 1.3.6.1.4.1.8691.2.13.1.5.3.1.2 | integer | read-write |
Enable or disable HTTPS console. Enumeration: 'enable': 1, 'disable': 0. |
| telnetConsole | 1.3.6.1.4.1.8691.2.13.1.5.3.1.3 | integer | read-write |
Enable or disable Telnet console. Enumeration: 'enable': 1, 'disable': 0. |
| sshConsole | 1.3.6.1.4.1.8691.2.13.1.5.3.1.4 | integer | read-write |
Enable or disable SSH console. Enumeration: 'enable': 1, 'disable': 0. |
| serialConsole | 1.3.6.1.4.1.8691.2.13.1.5.3.1.5 | integer | read-write |
Enable or disable Serial console. Enumeration: 'enable': 1, 'disable': 0. |
| resetButton | 1.3.6.1.4.1.8691.2.13.1.5.3.1.6 | integer | read-write |
Reset button setting. Enumeration: 'Disable_after_60_sec': 0, 'Always_enable': 1. |
| loadFactoryDefault | 1.3.6.1.4.1.8691.2.13.1.5.3.2 | |||
| loadFactoryDefaultSetting | 1.3.6.1.4.1.8691.2.13.1.5.3.2.1 | integer | read-write |
This function will reset all of the NPort W2x50A series device server's settings to the factory default values. Be aware that previous settings will be lost. Selecting Reset to factory default (excluding IP configuration) will reset all settings except the IP configuration to factory defaults. Selecting Reset to factory default will reset all settings including the IP configuration to factory defaults. Enumeration: 'resetToFactoryDefault-ExcludingIpConfiguration': 0, 'resetToFactoryDefault': 1. |
| sysStatus | 1.3.6.1.4.1.8691.2.13.1.6 | |||
| s2eConnections | 1.3.6.1.4.1.8691.2.13.1.6.1 | |||
| monitorRemoteIpTable | 1.3.6.1.4.1.8691.2.13.1.6.1.1 | no-access |
Serial to Network Connections Remote IP table. |
|
| 1.3.6.1.4.1.8691.2.13.1.6.1.1.1 | no-access |
Serial to Network Connections Remote IP entry. |
||
| remoteIpIndex | 1.3.6.1.4.1.8691.2.13.1.6.1.1.1.1 | integer | read-only |
Serial to Network Connections Remote IP index. |
| monitorRemoteIp | 1.3.6.1.4.1.8691.2.13.1.6.1.1.1.2 | ipaddress | read-only |
The remote IP currently connecting to this port. |
| serialPortStatus | 1.3.6.1.4.1.8691.2.13.1.6.2 | |||
| monitorSerialPortStatusTable | 1.3.6.1.4.1.8691.2.13.1.6.2.1 | no-access |
Serial Port Status table. |
|
| 1.3.6.1.4.1.8691.2.13.1.6.2.1.1 | no-access |
Serial Port Status entry. |
||
| monitorTxCount | 1.3.6.1.4.1.8691.2.13.1.6.2.1.1.1 | integer | read-only |
View the number of bytes transmitted from the port since the last time the port was initialized. |
| monitorRxCount | 1.3.6.1.4.1.8691.2.13.1.6.2.1.1.2 | integer | read-only |
View the number of bytes received by the port since the last time the port was initialized. |
| monitorTxTotalCount | 1.3.6.1.4.1.8691.2.13.1.6.2.1.1.3 | integer | read-only |
View the number of bytes transmitted from the port since the last time the system was initialized. |
| monitorRxTotalCount | 1.3.6.1.4.1.8691.2.13.1.6.2.1.1.4 | integer | read-only |
View the number of bytes received by the port since the last time the system was initialized. |
| monitorDSR | 1.3.6.1.4.1.8691.2.13.1.6.2.1.1.5 | integer | read-only |
View the current DSR status of this port. Enumeration: 'on': 1, 'off': 0. |
| monitorDTR | 1.3.6.1.4.1.8691.2.13.1.6.2.1.1.6 | integer | read-only |
View the current DTR status of this port. Enumeration: 'on': 1, 'off': 0. |
| monitorRTS | 1.3.6.1.4.1.8691.2.13.1.6.2.1.1.7 | integer | read-only |
View the current RTS status of this port. Enumeration: 'on': 1, 'off': 0. |
| monitorCTS | 1.3.6.1.4.1.8691.2.13.1.6.2.1.1.8 | integer | read-only |
View the current CTS status of this port. Enumeration: 'on': 1, 'off': 0. |
| monitorDCD | 1.3.6.1.4.1.8691.2.13.1.6.2.1.1.9 | integer | read-only |
View the current DCD status of this port. Enumeration: 'on': 1, 'off': 0. |
| serialPortErrorCount | 1.3.6.1.4.1.8691.2.13.1.6.3 | |||
| monitorSerialPortErrorCountTable | 1.3.6.1.4.1.8691.2.13.1.6.3.1 | no-access |
Serial Port Error Count table. |
|
| 1.3.6.1.4.1.8691.2.13.1.6.3.1.1 | no-access |
Serial Port Error Count entry. |
||
| monitorErrorCountFrame | 1.3.6.1.4.1.8691.2.13.1.6.3.1.1.1 | integer | read-only |
View the number of 'Frame' errors for this port. |
| monitorErrorCountParity | 1.3.6.1.4.1.8691.2.13.1.6.3.1.1.2 | integer | read-only |
View the number of 'Parity' errors for this port. |
| monitorErrorCountOverrun | 1.3.6.1.4.1.8691.2.13.1.6.3.1.1.3 | integer | read-only |
View the number of 'Overrun' errors for this port. |
| monitorErrorCountBreak | 1.3.6.1.4.1.8691.2.13.1.6.3.1.1.4 | integer | read-only |
View the number of 'Break' errors for this port. |
| serialPortSettings | 1.3.6.1.4.1.8691.2.13.1.6.4 | |||
| monitorSerialPortSettingsTable | 1.3.6.1.4.1.8691.2.13.1.6.4.1 | no-access |
Serial Port Settings table. |
|
| 1.3.6.1.4.1.8691.2.13.1.6.4.1.1 | no-access |
Serial Port Settings entry. |
||
| monitorBaudRate | 1.3.6.1.4.1.8691.2.13.1.6.4.1.1.1 | integer | read-only |
View the current baudrate of the port. |
| monitorDataBits | 1.3.6.1.4.1.8691.2.13.1.6.4.1.1.2 | integer | read-only |
View the number of bits per byte for the port. Enumeration: 'bits-8': 8, 'bits-5': 5, 'bits-7': 7, 'bits-6': 6. |
| monitorStopBits | 1.3.6.1.4.1.8691.2.13.1.6.4.1.1.3 | displaystring | read-only |
View the number of stop bits for the port. |
| monitorParity | 1.3.6.1.4.1.8691.2.13.1.6.4.1.1.4 | integer | read-only |
View the parity bit for the port. Enumeration: 'even': 24, 'none': 0, 'space': 56, 'odd': 8, 'mark': 40. |
| monitorRTSCTSFlowControl | 1.3.6.1.4.1.8691.2.13.1.6.4.1.1.5 | integer | read-only |
View if the port is using RTS/CTS flow control. Enumeration: 'on': 1, 'off': 0. |
| monitorXONXOFFFlowControl | 1.3.6.1.4.1.8691.2.13.1.6.4.1.1.6 | integer | read-only |
View if the port is using XON/XOFF flow control. Enumeration: 'on': 1, 'off': 0. |
| monitorFIFO | 1.3.6.1.4.1.8691.2.13.1.6.4.1.1.7 | integer | read-only |
View FIFO status of this port. Enumeration: 'enable': 1, 'disable': 0. |
| monitorInterface | 1.3.6.1.4.1.8691.2.13.1.6.4.1.1.8 | integer | read-only |
View the serial interface that the port is using. Enumeration: 'rs-422': 1, 'rs-232': 0, 'rs-485-4-wire': 3, 'rs-485-2-wire': 2. |
| serialPortBuffering | 1.3.6.1.4.1.8691.2.13.1.6.5 | |||
| monitorSerialPortBufferingTable | 1.3.6.1.4.1.8691.2.13.1.6.5.1 | no-access |
Serial Port Buffering table. |
|
| 1.3.6.1.4.1.8691.2.13.1.6.5.1.1 | no-access |
Serial Port Settings entry. |
||
| monitorBuffering | 1.3.6.1.4.1.8691.2.13.1.6.5.1.1.1 | integer | read-only |
View length of buffered data for the port. The length unit is byte. |
| sysWlanStatus | 1.3.6.1.4.1.8691.2.13.1.6.6 | |||
| wlanStatusActiveProfileName | 1.3.6.1.4.1.8691.2.13.1.6.6.1 | displaystring | read-only |
The active profile name. |
| wlanStatusIpConfiguration | 1.3.6.1.4.1.8691.2.13.1.6.6.2 | integer | read-only |
The IP configuration mode of the NPort. You can choose from four possible IP configuration modes: Static, DHCP, DHCP/BOOTP, BOOTP. Enumeration: 'dhcp': 1, 'static': 0, 'bootp': 2. |
| wlanStatusIpAddress | 1.3.6.1.4.1.8691.2.13.1.6.6.3 | ipaddress | read-only |
An IP address is a number assigned to a network device (such as a computer) as a permanent address on the network. Computers use the IP address to identify and talk to each other over the network. Choose a proper IP address that is unique and valid in your network environment. |
| wlanStatusNetMask | 1.3.6.1.4.1.8691.2.13.1.6.6.4 | ipaddress | read-only |
A subnet mask represents all of the network hosts at one geographic location, in one building, or on the same local area network. When a packet is sent out over the network, the NPort W2x50A series device server will use the subnet mask to check whether the TCP/IP host specified in the packet is on the local network segment. If the address is on the same network segment as the NPort W2x50A series device server, a connection is established directly from the NPort W2x50A series device server. Otherwise, the connection is established through the given default gateway. |
| wlanStatusDefaultGateway | 1.3.6.1.4.1.8691.2.13.1.6.6.5 | ipaddress | read-only |
A gateway is a network computer that acts as an entrance to another network. Usually, the computers that control traffic within the network or at the local Internet service provider are gateway nodes. The NPort W2x50A series device server needs to know the IP address of the default gateway computer in order to communicate with the hosts outside the local network environment. For correct gateway IP address information, consult with the network administrator. |
| wlanStatusNetworkType | 1.3.6.1.4.1.8691.2.13.1.6.6.6 | displaystring | read-only |
Network Type of Wireless LAN. The possible values are 'Infrastrcture Mode' and 'Ad-hoc Mode' |
| wlanStatusRFType | 1.3.6.1.4.1.8691.2.13.1.6.6.7 | displaystring | read-only |
RF type of Wireless LAN. The possible values are 'N/A', 'Auto', '802.11a', '802.11b', '802.11g' |
| wlanStatusSSID | 1.3.6.1.4.1.8691.2.13.1.6.6.8 | displaystring | read-only |
The SSID of WLAN. |
| wlanStatusChannel | 1.3.6.1.4.1.8691.2.13.1.6.6.9 | displaystring | read-only |
The currently used channel. |
| wlanStatusAuthentication | 1.3.6.1.4.1.8691.2.13.1.6.6.10 | displaystring | read-only |
Authentication type of Wireless LAN. The possible values are 'Unknown', 'Open System', 'Shared Key', 'WPA', 'WPA-PSK', 'WPA2', 'WPA2-PSK' |
| wlanStatusEncryption | 1.3.6.1.4.1.8691.2.13.1.6.6.11 | displaystring | read-only |
Show encryption type of Wireless LAN. |
| wlanStatusRegion | 1.3.6.1.4.1.8691.2.13.1.6.6.12 | displaystring | read-only |
Display region. The possible values are 'US', 'EU', 'JP' |
| wlanStatusSignalStrength | 1.3.6.1.4.1.8691.2.13.1.6.6.13 | displaystring | read-only |
The signal strength of Wireless LAN. |
| wlanStatusConnectionSpeed | 1.3.6.1.4.1.8691.2.13.1.6.6.14 | displaystring | read-only |
The connection speed of Wireless LAN. |
| wlanStatusCurrentBSSID | 1.3.6.1.4.1.8691.2.13.1.6.6.15 | displaystring | read-only |
The current BSSID of Wireless LAN. |
| activateSettings | 1.3.6.1.4.1.8691.2.13.1.7 | |||
| doActivate | 1.3.6.1.4.1.8691.2.13.1.7.1 | integer | read-write |
Activate current settings. Enumeration: 'activate': 1. |
| restart | 1.3.6.1.4.1.8691.2.13.1.8 | |||
| restartPorts | 1.3.6.1.4.1.8691.2.13.1.8.1 | integer | read-write |
Restart serial port. Restarting will cause port reseting. Enumeration: 'port2': 1, 'port1': 0. |
| restartSystem | 1.3.6.1.4.1.8691.2.13.1.8.2 | integer | read-write |
Restart the NPort W2x50A series device server. Be sure to save all of your configuration changes before you restart the system. Otherwise, all of the changes will be lost. Enumeration: 'restart': 1. |