MOXA-IKS6726A-MIB: View SNMP OID List / Download MIB

VENDOR: MOXA TECHNOLOGIES CO.

Home	MIB: MOXA-IKS6726A-MIB
Download as:		SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC		Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash). Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded. The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.

Object Name	OID	Type	Access	Info
moxa	1.3.6.1.4.1.8691
industrialEthernet	1.3.6.1.4.1.8691.7
iks6726A	1.3.6.1.4.1.8691.7.116			The MIB module for Moxa IKS-6726A series specific information.
mibNotificationsPrefix	1.3.6.1.4.1.8691.7.116.0
configChangeTrap	1.3.6.1.4.1.8691.7.116.0.1			The configuration has been changed.
power1Trap	1.3.6.1.4.1.8691.7.116.0.2			The power on/off changed.
power2Trap	1.3.6.1.4.1.8691.7.116.0.3			The power on/off changed.
trafficOverloadTrap	1.3.6.1.4.1.8691.7.116.0.4			The ethernet port's traffic loading exceeds the pre-defined value.
redundancyTopologyChangedTrap	1.3.6.1.4.1.8691.7.116.0.5			The redundancy topology has been changed.
turboRingCouplingPortChangedTrap	1.3.6.1.4.1.8691.7.116.0.6			The coupling path of Turbo Ring has been changed.
turboRingMasterChangedTrap	1.3.6.1.4.1.8691.7.116.0.7			The master of Turbo Ring has been changed.
poeWarningTrap	1.3.6.1.4.1.8691.7.116.0.16			The POE warning message.
portLoopDetectedTrap	1.3.6.1.4.1.8691.7.116.0.17			The DUT port is looping.
rateLimitedOnTrap	1.3.6.1.4.1.8691.7.116.0.18			The DUT port rate limit is ON.
lldpChgTrap	1.3.6.1.4.1.8691.7.116.0.19			The LLDP table is changing.
usbWarningTrap	1.3.6.1.4.1.8691.7.116.0.20			USB warning trap event.
turboRingMasterMismatchTrap	1.3.6.1.4.1.8691.7.116.0.22			The master of Turbo Ring has been mismatch.
swMgmt	1.3.6.1.4.1.8691.7.116.1
numberOfPorts	1.3.6.1.4.1.8691.7.116.1.1	integer	read-only	Total Ports.
switchModel	1.3.6.1.4.1.8691.7.116.1.2	displaystring	read-only	The switch model.
firmwareVersion	1.3.6.1.4.1.8691.7.116.1.4	displaystring	read-only	The firmware version.
enableWebConfig	1.3.6.1.4.1.8691.7.116.1.5	integer	read-write	This enable the Web. configuration function. Enumeration: 'httpsOnly': 2, 'disable': 0, 'httpOrHttps': 1.
enableTelnetConsole	1.3.6.1.4.1.8691.7.116.1.6	integer	read-write	This enable telnet console. Enumeration: 'enable': 1, 'disable': 0.
lineSwapRecovery	1.3.6.1.4.1.8691.7.116.1.7	integer	read-write	This enable line-swap-fast-recovery function. Enumeration: 'enable': 1, 'disable': 0.
networkSetting	1.3.6.1.4.1.8691.7.116.1.8
switchIpAddr	1.3.6.1.4.1.8691.7.116.1.8.1	ipaddress	read-only	The IP Address of this switch.
switchIpMask	1.3.6.1.4.1.8691.7.116.1.8.2	ipaddress	read-only	The netmask of this switch.
defaultGateway	1.3.6.1.4.1.8691.7.116.1.8.3	ipaddress	read-only	The default gateway of this switch.
enableAutoIpConfig	1.3.6.1.4.1.8691.7.116.1.8.4	integer	read-write	This enable the automatic IP address configuration function. Enumeration: 'enableBOOTP': 2, 'enableDHCP': 1, 'disable': 0.
dnsServer1IpAddr	1.3.6.1.4.1.8691.7.116.1.8.5	ipaddress	read-write	The first DNS server's IP address
snmpTrapCommunity	1.3.6.1.4.1.8691.7.116.1.8.6	displaystring	read-write	The SNMP trap community name
trapServerAddr	1.3.6.1.4.1.8691.7.116.1.8.7	displaystring	read-write	The IP address/Domain name of SNMP trap server
dnsServer2IpAddr	1.3.6.1.4.1.8691.7.116.1.8.8	ipaddress	read-write	The second DNS server's IP address
snmpReadCommunity	1.3.6.1.4.1.8691.7.116.1.8.9	displaystring	read-write	The SNMP read community name
snmpTrap2Community	1.3.6.1.4.1.8691.7.116.1.8.11	displaystring	read-write	The Second SNMP trap community name
trap2ServerAddr	1.3.6.1.4.1.8691.7.116.1.8.12	displaystring	read-write	The IP address/Domain name of Second SNMP trap server
snmpInformEnable	1.3.6.1.4.1.8691.7.116.1.8.13	integer	read-write	This enable the snmpInform function. Enumeration: 'enable': 1, 'disable': 0.
snmpInformRetries	1.3.6.1.4.1.8691.7.116.1.8.14	integer	read-write	The snmp inform retry times of SNMP trap server
snmpInformTimeout	1.3.6.1.4.1.8691.7.116.1.8.15	integer	read-write	The snmp inform interval of SNMP trap server
dhcpRetryPeriods	1.3.6.1.4.1.8691.7.116.1.8.16	integer	read-write	The DHCP retry periods.
dhcpRetryTimes	1.3.6.1.4.1.8691.7.116.1.8.17	integer	read-write	The dhcp retry times.
trapVersion	1.3.6.1.4.1.8691.7.116.1.8.18	integer	read-write	Version of SNMP trap Enumeration: 'snmpv2-Notification': 1, 'snmpv2-Inform': 2, 'snmpv1-Trap': 0.
portSetting	1.3.6.1.4.1.8691.7.116.1.9
portTable	1.3.6.1.4.1.8691.7.116.1.9.1		no-access	The port table.
portEntry	1.3.6.1.4.1.8691.7.116.1.9.1.1		no-access	The port entry.
portIndex	1.3.6.1.4.1.8691.7.116.1.9.1.1.1	integer	read-only	The port index.
portDesc	1.3.6.1.4.1.8691.7.116.1.9.1.1.2	displaystring	read-only	The port description
portEnable	1.3.6.1.4.1.8691.7.116.1.9.1.1.3	integer	read-write	This enable the port. Enumeration: 'enable': 1, 'disable': 0.
portSpeed	1.3.6.1.4.1.8691.7.116.1.9.1.1.4	integer	read-write	The port speed and duplex. Enumeration: 'speed10M-Full': 3, 'auto': 0, 'speed1000M-Full': 5, 'speed100M-Full': 1, 'speed10M-Half': 4, 'speed100M-Half': 2.
portMDI	1.3.6.1.4.1.8691.7.116.1.9.1.1.5	integer	read-write	The port MDI/MDIX. Enumeration: 'na': 0, 'mdi': 2, 'mdiX': 3, 'auto': 1.
portFDXFlowCtrl	1.3.6.1.4.1.8691.7.116.1.9.1.1.6	integer	read-write	The port FDX Flow Control Enumeration: 'enable': 1, 'disable': 0.
portName	1.3.6.1.4.1.8691.7.116.1.9.1.1.7	displaystring	read-write	The port Name
monitor	1.3.6.1.4.1.8691.7.116.1.10
power1InputStatus	1.3.6.1.4.1.8691.7.116.1.10.1	integer	read-only	The status of the first power input. Enumeration: 'present': 1, 'not-present': 0.
power2InputStatus	1.3.6.1.4.1.8691.7.116.1.10.2	integer	read-only	The status of the second power input. Enumeration: 'present': 1, 'not-present': 0.
monitorPortTable	1.3.6.1.4.1.8691.7.116.1.10.3		no-access	The port table of monitor function.
monitorPortEntry	1.3.6.1.4.1.8691.7.116.1.10.3.1		no-access	The port table entry of monitor function.
monitorLinkStatus	1.3.6.1.4.1.8691.7.116.1.10.3.1.2	integer	read-only	The port link status. Enumeration: 'on': 1, 'disable': -1, 'off': 0.
monitorSpeed	1.3.6.1.4.1.8691.7.116.1.10.3.1.3	integer	read-only	The port speed and duplex status. Enumeration: 'speed10M-Full': 1, 'speed1000M-Half': 4, 'na': -1, 'speed1000M-Full': 5, 'speed100M-Full': 3, 'speed10M-Half': 0, 'speed100M-Half': 2.
monitorAutoMDI	1.3.6.1.4.1.8691.7.116.1.10.3.1.4	integer	read-only	The port MDI/MDIX status. Enumeration: 'na': -1, 'mdi': 0, 'mdiX': 1.
monitorTraffic	1.3.6.1.4.1.8691.7.116.1.10.3.1.5	integer	read-only	The trafic loading percentage of port.
monitorFDXFlowCtrl	1.3.6.1.4.1.8691.7.116.1.10.3.1.6	integer	read-only	The Full-Duplex flow control status Enumeration: 'on': 1, 'off': 0.
monitorTxTraffic	1.3.6.1.4.1.8691.7.116.1.10.3.1.7	integer	read-only	The TX traffic loading percentage of port.
monitorRxTraffic	1.3.6.1.4.1.8691.7.116.1.10.3.1.8	integer	read-only	The RTX traffic loading percentage of port.
monitorDiTable	1.3.6.1.4.1.8691.7.116.1.10.4		no-access	The DI table of monitor function.
monitorDiEntry	1.3.6.1.4.1.8691.7.116.1.10.4.1		no-access	The DI table entry of monitor function.
diIndex	1.3.6.1.4.1.8691.7.116.1.10.4.1.1	integer	read-only	The DI index of monitor function
diInputStatus	1.3.6.1.4.1.8691.7.116.1.10.4.1.2	integer	read-only	The DI input status. Enumeration: 'on': 1, 'off': 0.
monitorSFPTable	1.3.6.1.4.1.8691.7.116.1.10.7		no-access	The SFP table of monitor function.
monitorSFPEntry	1.3.6.1.4.1.8691.7.116.1.10.7.1		no-access	The SFP table entry of monitor function.
sfpPort	1.3.6.1.4.1.8691.7.116.1.10.7.1.1	displaystring	read-only	The SFP index of monitor function
sfpModelName	1.3.6.1.4.1.8691.7.116.1.10.7.1.2	displaystring	read-only	The SFP ModelName of monitor function
sfpTemperature	1.3.6.1.4.1.8691.7.116.1.10.7.1.3	displaystring	read-only	The SFP Temperature(XC) of monitor function
sfpVoltage	1.3.6.1.4.1.8691.7.116.1.10.7.1.4	displaystring	read-only	The SFP Voltage(V) of monitor function
sfpTxPower	1.3.6.1.4.1.8691.7.116.1.10.7.1.5	displaystring	read-only	The SFP TX power(dBm) of monitor function
sfpRxPower	1.3.6.1.4.1.8691.7.116.1.10.7.1.6	displaystring	read-only	The SFP RX power(dBm) of monitor function
powerConsumption	1.3.6.1.4.1.8691.7.116.1.10.8	displaystring	read-only	Current power comsuption(Watts). Accurate to second decimal place.
emailWarning	1.3.6.1.4.1.8691.7.116.1.11
emailService	1.3.6.1.4.1.8691.7.116.1.11.1
emailWarningMailServer	1.3.6.1.4.1.8691.7.116.1.11.1.1	displaystring	read-write	The email server's Ip Address/Domain name of email warning function.
emailWarningFirstEmailAddr	1.3.6.1.4.1.8691.7.116.1.11.1.2	displaystring	read-write	The first email address of email warning function.
emailWarningSecondEmailAddr	1.3.6.1.4.1.8691.7.116.1.11.1.3	displaystring	read-write	The second email address of email warning function.
emailWarningThirdEmailAddr	1.3.6.1.4.1.8691.7.116.1.11.1.4	displaystring	read-write	The third email address of email warning function.
emailWarningFourthEmailAddr	1.3.6.1.4.1.8691.7.116.1.11.1.5	displaystring	read-write	The fourth email address of email warning function.
emailWarningSMTPPort	1.3.6.1.4.1.8691.7.116.1.11.1.6	integer	read-write	The email server's SMTP port of email warning function.
setDeviceIp	1.3.6.1.4.1.8691.7.116.1.12
setDevIpTable	1.3.6.1.4.1.8691.7.116.1.12.1		no-access	The set devvice IP table.
setDevIpEntry	1.3.6.1.4.1.8691.7.116.1.12.1.1		no-access	The set devvice IP table entry.
setDevIpIndex	1.3.6.1.4.1.8691.7.116.1.12.1.1.1	integer	read-only	The set devvice IP index.
setDevIpCurrentIpofDevice	1.3.6.1.4.1.8691.7.116.1.12.1.1.2	displaystring	read-only	The current IP address of connected to this port.
setDevIpPresentBy	1.3.6.1.4.1.8691.7.116.1.12.1.1.3	integer	read-only	The protocol used that assigning IP to the device. Enumeration: 'rarp': 2, 'dhcpClient': 1, 'bootp': 4, 'no': 0.
setDevIpDedicatedIp	1.3.6.1.4.1.8691.7.116.1.12.1.1.4	ipaddress	read-write	The IP address when assign to the device connected to this port.
mirroring	1.3.6.1.4.1.8691.7.116.1.13
targetPort	1.3.6.1.4.1.8691.7.116.1.13.1	integer	read-write	The mirrored port of mirroring function.
mirroringPort	1.3.6.1.4.1.8691.7.116.1.13.2	integer	read-write	The mirroring port of mirroring function.
monitorDirection	1.3.6.1.4.1.8691.7.116.1.13.3	integer	read-write	The traffic direction of mirroring function. Enumeration: 'biDirectional': 2, 'inputDataStream': 0, 'outputDataStream': 1.
portTrunking	1.3.6.1.4.1.8691.7.116.1.14
trunkSettingTable	1.3.6.1.4.1.8691.7.116.1.14.1		no-access	Port Trunking Setting Table.
trunkSettingEntry	1.3.6.1.4.1.8691.7.116.1.14.1.1		no-access	Port Trunking Setting Entry.
trunkSettingIndex	1.3.6.1.4.1.8691.7.116.1.14.1.1.1	integer	read-only	Trunking Group Index.
trunkType	1.3.6.1.4.1.8691.7.116.1.14.1.1.2	integer	read-write	Trunking Group Type. Enumeration: 'lacp': 2, 'static': 1.
trunkMemberPorts	1.3.6.1.4.1.8691.7.116.1.14.1.1.3	portlist	read-write	Trunking Group Member Ports.
trunkTable	1.3.6.1.4.1.8691.7.116.1.14.2		no-access	Port Trunking Table.
trunkEntry	1.3.6.1.4.1.8691.7.116.1.14.2.1		no-access	Port Trunking Entry.
trunkIndex	1.3.6.1.4.1.8691.7.116.1.14.2.1.1	integer	read-only	Trunking Group Index.
trunkPort	1.3.6.1.4.1.8691.7.116.1.14.2.1.2	integer	read-only	Trunking Group Member Port.
trunkStatus	1.3.6.1.4.1.8691.7.116.1.14.2.1.3	integer	read-only	Trunking Port Status. Enumeration: 'fail': 2, 'standby': 3, 'success': 1.
commRedundancy	1.3.6.1.4.1.8691.7.116.1.16
protocolOfRedundancySetup	1.3.6.1.4.1.8691.7.116.1.16.1	integer	read-write	This set the redundancy protocol of this switch. Enumeration: 'turboRingV2': 3, 'spanningTree': 1, 'turboRing': 2, 'mstp': 5, 'turboChain': 4.
turboRing	1.3.6.1.4.1.8691.7.116.1.16.2
turboRingMaster	1.3.6.1.4.1.8691.7.116.1.16.2.1	integer	read-only	Is this a Master or Slave. Enumeration: 'yes': 1, 'no': 0.
turboRingMasterSetup	1.3.6.1.4.1.8691.7.116.1.16.2.2	integer	read-write	Set this to be Master. Enumeration: 'yes': 1, 'no': 0.
turboRingPortTable	1.3.6.1.4.1.8691.7.116.1.16.2.3		no-access	Turbo Ring Port Table.
turboRingPortEntry	1.3.6.1.4.1.8691.7.116.1.16.2.3.1		no-access	Turbo Ring Port Entry.
turboRingPortIndex	1.3.6.1.4.1.8691.7.116.1.16.2.3.1.1	integer	read-only	Turbo Ring Port Index.
turboRingPortStatus	1.3.6.1.4.1.8691.7.116.1.16.2.3.1.2	integer	read-only	Turbo Ring Port Status. Enumeration: 'portDisabled': 0, 'linkDown': 2, 'learning': 4, 'forwarding': 5, 'notTurboRingPort': 1, 'blocked': 3.
turboRingPortDesignatedBridge	1.3.6.1.4.1.8691.7.116.1.16.2.3.1.3	macaddress	read-only	The MAC address of the bridge which this port considers to be the Designated Bridge for this port's segment.
turboRingPortDesignatedPort	1.3.6.1.4.1.8691.7.116.1.16.2.3.1.4	integer	read-only	The Port Number of the port on the Designated Bridge for this port's segment.
turboRingDesignatedMaster	1.3.6.1.4.1.8691.7.116.1.16.2.6	macaddress	read-only	The MAC address of the bridge which is the Master of the TURBO RING.
turboRingRdntPort1	1.3.6.1.4.1.8691.7.116.1.16.2.7	integer	read-write	The port number of 1st Redundant Port on the TURBO RING.
turboRingRdntPort2	1.3.6.1.4.1.8691.7.116.1.16.2.8	integer	read-write	The port number of 2nd Redundant Port on the TURBO RING.
turboRingEnableCoupling	1.3.6.1.4.1.8691.7.116.1.16.2.9	integer	read-write	This enable the ring coupling function. Enumeration: 'enable': 1, 'disable': 0.
turboRingCouplingPort	1.3.6.1.4.1.8691.7.116.1.16.2.10	integer	read-write	The coupling port of ring coupling function.
turboRingCouplingPortStatus	1.3.6.1.4.1.8691.7.116.1.16.2.11	integer	read-only	The coupling port status of ring coupling function. Enumeration: 'notCouplingPort': 1, 'forwarding': 5, 'linkDown': 2, 'portDisabled': 0, 'blocked': 3.
turboRingControlPort	1.3.6.1.4.1.8691.7.116.1.16.2.12	integer	read-write	The control port of ring coupling function.
turboRingControlPortStatus	1.3.6.1.4.1.8691.7.116.1.16.2.13	integer	read-only	The control port status of ring coupling function. Enumeration: 'portDisabled': 0, 'linkDown': 2, 'inactive': 6, 'active': 7, 'notControlPort': 1, 'forwarding': 5, 'blocked': 3.
turboRingBrokenStatus	1.3.6.1.4.1.8691.7.116.1.16.2.14	integer	read-only	Turbo Ring broken display. Enumeration: 'na': 0, 'broken': 2, 'normal': 1.
spanningTree	1.3.6.1.4.1.8691.7.116.1.16.3
spanningTreeRoot	1.3.6.1.4.1.8691.7.116.1.16.3.1	integer	read-only	The root of spanning tree. Enumeration: 'yes': 1, 'no': 0.
spanningTreeBridgePriority	1.3.6.1.4.1.8691.7.116.1.16.3.2	integer	read-write	The bridge priority of spanning tree protocol. Enumeration: 'priority4096': 4096, 'priority40960': 40960, 'priority32768': 32768, 'priority24576': 24576, 'priority36864': 36864, 'priority20480': 20480, 'priority12288': 12288, 'priority8192': 8192, 'priority0': 0, 'priority57344': 57344, 'priority49152': 49152, 'priority45056': 45056, 'priority61440': 61440, 'priority53248': 53248, 'priority28672': 28672, 'priority16384': 16384.
spanningTreeHelloTime	1.3.6.1.4.1.8691.7.116.1.16.3.3	integer	read-write	The hello time of spanning tree protocol.
spanningTreeMaxAge	1.3.6.1.4.1.8691.7.116.1.16.3.4	integer	read-write	The max. age of spanning tree protocol.
spanningTreeForwardingDelay	1.3.6.1.4.1.8691.7.116.1.16.3.5	integer	read-write	Tje forwarding delay of spanning tree protocol.
spanningTreeTable	1.3.6.1.4.1.8691.7.116.1.16.3.6		no-access	The spanning tree table.
spanningTreeEntry	1.3.6.1.4.1.8691.7.116.1.16.3.6.1		no-access	The spanning tree port entry.
spanningTreeIndex	1.3.6.1.4.1.8691.7.116.1.16.3.6.1.1	integer	read-only	The index of spanning tree table.
enableSpanningTree	1.3.6.1.4.1.8691.7.116.1.16.3.6.1.2	integer	read-write	This enable of spanning tree protocol for this port. Enumeration: 'enable': 1, 'disable': 0.
spanningTreePortPriority	1.3.6.1.4.1.8691.7.116.1.16.3.6.1.3	integer	read-write	The port priority of spanning tree protocol. Enumeration: 'priority144': 144, 'priority224': 224, 'priority64': 64, 'priority48': 48, 'priority32': 32, 'priority80': 80, 'priority112': 112, 'priority160': 160, 'priority96': 96, 'priority0': 0, 'priority208': 208, 'priority240': 240, 'priority16': 16, 'priority128': 128, 'priority192': 192, 'priority176': 176.
spanningTreePortCost	1.3.6.1.4.1.8691.7.116.1.16.3.6.1.4	integer	read-write	The port cost of spanning tree protocol.
spanningTreePortStatus	1.3.6.1.4.1.8691.7.116.1.16.3.6.1.5	integer	read-only	The port status of spanning tree protocol. Enumeration: 'portDisabled': 0, 'notSpanningTreePort': 1, 'linkDown': 2, 'learning': 4, 'forwarding': 5, 'blocked': 3.
spanningTreePortEdge	1.3.6.1.4.1.8691.7.116.1.16.3.6.1.6	integer	read-write	This configures the Edge Port property for this port. Enumeration: 'auto': 0, 'forceEdge': 1, 'false': 2.
activeProtocolOfRedundancy	1.3.6.1.4.1.8691.7.116.1.16.4	integer	read-only	This shows the active redundancy protocol of this switch now. The none(0) stauts will be showed if only if the switch's redundancy protocol is set to spanning tree and none of ports enable spanning tree. Enumeration: 'none': 0, 'turboRingV2': 3, 'turboRing': 2, 'mstp': 5, 'spanningTree': 1, 'turboChain': 4.
turboRingV2	1.3.6.1.4.1.8691.7.116.1.16.5
turboRingV2Ring1	1.3.6.1.4.1.8691.7.116.1.16.5.1
ringIndexRing1	1.3.6.1.4.1.8691.7.116.1.16.5.1.1	integer	read-only	The turboRingV2 Ring Index.
ringEnableRing1	1.3.6.1.4.1.8691.7.116.1.16.5.1.2	integer	read-write	The turboRingV2 Ring1 Enalbe Config. Enumeration: 'enable': 1, 'disable': 0.
masterSetupRing1	1.3.6.1.4.1.8691.7.116.1.16.5.1.3	integer	read-write	Is this a Master or Slave. Enumeration: 'yes': 1, 'no': 0.
masterStatusRing1	1.3.6.1.4.1.8691.7.116.1.16.5.1.4	integer	read-only	Set this to be Master. Enumeration: 'yes': 1, 'no': 0.
designatedMasterRing1	1.3.6.1.4.1.8691.7.116.1.16.5.1.5	macaddress	read-only	The MAC address of the bridge which is the Master of the turboRingV2.
rdnt1stPortRing1	1.3.6.1.4.1.8691.7.116.1.16.5.1.6	integer	read-write	The port number of 1st Redundant Port on the turboRingV2.
rdnt1stPortStatusRing1	1.3.6.1.4.1.8691.7.116.1.16.5.1.7	integer	read-only	The status of 1st Redundant Port on the turboRingV2. Enumeration: 'linkdown': 2, 'disabled': 0, 'learning': 4, 'forwarding': 5, 'blocking': 3, 'notRedundant': 1.
rdnt2ndPortRing1	1.3.6.1.4.1.8691.7.116.1.16.5.1.8	integer	read-write	The port number of 2nd Redundant Port on the turboRingV2.
rdnt2ndPortStatusRing1	1.3.6.1.4.1.8691.7.116.1.16.5.1.9	integer	read-only	The status of 2nd Redundant Port on the turboRingV2. Enumeration: 'linkdown': 2, 'disabled': 0, 'learning': 4, 'forwarding': 5, 'blocking': 3, 'notRedundant': 1.
brokenStatusRing1	1.3.6.1.4.1.8691.7.116.1.16.5.1.10	integer	read-only	turboRingV2 broken display. Enumeration: 'na': 0, 'broken': 2, 'normal': 1.
turboRingV2Ring2	1.3.6.1.4.1.8691.7.116.1.16.5.2
ringIndexRing2	1.3.6.1.4.1.8691.7.116.1.16.5.2.1	integer	read-only	The turboRingV2 Ring Index.
ringEnableRing2	1.3.6.1.4.1.8691.7.116.1.16.5.2.2	integer	read-write	The turboRingV2 Ring2 Enalbe Config. Enumeration: 'enable': 1, 'disable': 0.
masterSetupRing2	1.3.6.1.4.1.8691.7.116.1.16.5.2.3	integer	read-write	Is this a Master or Slave. Enumeration: 'yes': 1, 'no': 0.
masterStatusRing2	1.3.6.1.4.1.8691.7.116.1.16.5.2.4	integer	read-only	Set this to be Master. Enumeration: 'yes': 1, 'no': 0.
designatedMasterRing2	1.3.6.1.4.1.8691.7.116.1.16.5.2.5	macaddress	read-only	The MAC address of the bridge which is the Master of the turboRingV2.
rdnt1stPortRing2	1.3.6.1.4.1.8691.7.116.1.16.5.2.6	integer	read-write	The port number of 1st Redundant Port on the turboRingV2.
rdnt1stPortStatusRing2	1.3.6.1.4.1.8691.7.116.1.16.5.2.7	integer	read-only	The status of 1st Redundant Port on the turboRingV2. Enumeration: 'linkdown': 2, 'disabled': 0, 'learning': 4, 'forwarding': 5, 'blocking': 3, 'notRedundant': 1.
rdnt2ndPortRing2	1.3.6.1.4.1.8691.7.116.1.16.5.2.8	integer	read-write	The port number of 2nd Redundant Port on the turboRingV2.
rdnt2ndPortStatusRing2	1.3.6.1.4.1.8691.7.116.1.16.5.2.9	integer	read-only	The status of 2nd Redundant Port on the turboRingV2. Enumeration: 'linkdown': 2, 'disabled': 0, 'learning': 4, 'forwarding': 5, 'blocking': 3, 'notRedundant': 1.
brokenStatusRing2	1.3.6.1.4.1.8691.7.116.1.16.5.2.10	integer	read-only	turboRingV2 broken display. Enumeration: 'na': 0, 'broken': 2, 'normal': 1.
turboRingV2Coupling	1.3.6.1.4.1.8691.7.116.1.16.5.3
couplingEnable	1.3.6.1.4.1.8691.7.116.1.16.5.3.1	integer	read-write	Setting the ring coupling enable. Enumeration: 'enable': 1, 'disable': 0.
couplingMode	1.3.6.1.4.1.8691.7.116.1.16.5.3.2	integer	read-write	Setting the ring coupling mode. Enumeration: 'couplingBackup': 2, 'couplingPrimary': 3, 'dualHoming': 1.
coupling1stPort	1.3.6.1.4.1.8691.7.116.1.16.5.3.3	integer	read-write	If in 'DUAL HOMING' mode,port name is 'Primary port',If in 'COUPLING' mode,port name is 'Coupling port'
coupling1stPortStatus	1.3.6.1.4.1.8691.7.116.1.16.5.3.4	integer	read-only	The 1st coupling port status of coupling function. Enumeration: 'linkdown': 2, 'disabled': 0, 'learning': 4, 'forwarding': 5, 'blocking': 3, 'notRedundant': 1.
coupling2ndPort	1.3.6.1.4.1.8691.7.116.1.16.5.3.5	integer	read-write	If in 'DUAL HOMING' mode,port name is 'Backup port',If in 'COUPLING' mode,port name is no used.
coupling2ndPortStatus	1.3.6.1.4.1.8691.7.116.1.16.5.3.6	integer	read-only	The 2nd coupling port status of coupling function. Enumeration: 'linkdown': 2, 'disabled': 0, 'learning': 4, 'forwarding': 5, 'blocking': 3, 'notRedundant': 1.
turboChain	1.3.6.1.4.1.8691.7.116.1.16.6
turboChainRole	1.3.6.1.4.1.8691.7.116.1.16.6.1	integer	read-write	The Role of TURBO CHAIN. Enumeration: 'member': 2, 'head': 1, 'tail': 3.
turboChainPort1	1.3.6.1.4.1.8691.7.116.1.16.6.2	integer	read-write	The port number of 1st Redundant Port on the TURBO CHAIN. If switch role is Turbo Chain Head, this is Head port, If Switch role is Turbo Chain Tail, this is Tail port.
turboChainPort2	1.3.6.1.4.1.8691.7.116.1.16.6.3	integer	read-write	The port number of 2nd Redundant Port on the TURBO CHAIN. It is the member port of TurboChain
turboChainPort1Status	1.3.6.1.4.1.8691.7.116.1.16.6.4	integer	read-only	Turbo Chain Port Status. Enumeration: 'na': 5, 'linkDown': 1, 'notTurboChainPort': 0, 'forwarding': 4, 'blocking': 2, 'blocked': 3.
turboChainPort2Status	1.3.6.1.4.1.8691.7.116.1.16.6.5	integer	read-only	Turbo Chain Port Status. Enumeration: 'na': 5, 'linkDown': 1, 'notTurboChainPort': 0, 'forwarding': 4, 'blocking': 2, 'blocked': 3.
turboChainPort1PartnerBridge	1.3.6.1.4.1.8691.7.116.1.16.6.6	macaddress	read-only	The MAC address of the next bridge
turboChainPort2PartnerBridge	1.3.6.1.4.1.8691.7.116.1.16.6.7	macaddress	read-only	The MAC address of the neighbor Turbo Chain switch
trafficPrioritization	1.3.6.1.4.1.8691.7.116.1.18
qosClassification	1.3.6.1.4.1.8691.7.116.1.18.1
queuingMechanism	1.3.6.1.4.1.8691.7.116.1.18.1.1	integer	read-write	The queuing mechanism. Enumeration: 'schedweightfair': 0, 'schedstrict': 1.
qosPortTable	1.3.6.1.4.1.8691.7.116.1.18.1.2		no-access	The QoS port table.
qosPortEntry	1.3.6.1.4.1.8691.7.116.1.18.1.2.1		no-access	The QoS Port Entry.
inspectTos	1.3.6.1.4.1.8691.7.116.1.18.1.2.1.1	integer	read-write	This enable the inspection of ToS field. Enumeration: 'yes': 1, 'no': 0.
inspectCos	1.3.6.1.4.1.8691.7.116.1.18.1.2.1.2	integer	read-write	This enable the inspection of CoS field. Enumeration: 'yes': 1, 'no': 0.
portPriority	1.3.6.1.4.1.8691.7.116.1.18.1.2.1.3	integer	read-write	The deault priority of the port. Enumeration: 'priority1': 1, 'priority0': 0, 'priority3': 3, 'priority2': 2, 'priority5': 5, 'priority4': 4, 'priority7': 7, 'priority6': 6.
cosMapping	1.3.6.1.4.1.8691.7.116.1.18.2
cosMappingTable	1.3.6.1.4.1.8691.7.116.1.18.2.1		no-access	The COS mapping table.
cosMappingEntry	1.3.6.1.4.1.8691.7.116.1.18.2.1.1		no-access	The COS mapping Entry.
cosTag	1.3.6.1.4.1.8691.7.116.1.18.2.1.1.1	integer	read-only	The cos tag of TOS field.
cosMappedPriority	1.3.6.1.4.1.8691.7.116.1.18.2.1.1.2	integer	read-write	The frame's priority corresponding to it's COS tag value. Enumeration: 'TrafficClass2': 2, 'TrafficClass3': 3, 'TrafficClass0': 0, 'TrafficClass1': 1.
tosMapping	1.3.6.1.4.1.8691.7.116.1.18.3
tosMappingTable	1.3.6.1.4.1.8691.7.116.1.18.3.1		no-access	The TOS mapping table.
tosMappingEntry	1.3.6.1.4.1.8691.7.116.1.18.3.1.1		no-access	TOS mapping Entry.
tosClass	1.3.6.1.4.1.8691.7.116.1.18.3.1.1.1	integer	read-only	The TOS class of TOS field.
tosMappedPriority	1.3.6.1.4.1.8691.7.116.1.18.3.1.1.2	integer	read-write	The frame's priority corresponding to it's TOS class value. Enumeration: 'priority1': 1, 'priority0': 0, 'priority3': 3, 'priority2': 2, 'priority5': 5, 'priority4': 4, 'priority7': 7, 'priority6': 6.
vlan	1.3.6.1.4.1.8691.7.116.1.19
vlanPortSettingTable	1.3.6.1.4.1.8691.7.116.1.19.1		no-access	The vlan seting table of ports.
vlanPortSettingEntry	1.3.6.1.4.1.8691.7.116.1.19.1.1		no-access	Port Setting Entry of VLAN.
portVlanType	1.3.6.1.4.1.8691.7.116.1.19.1.1.1	integer	read-write	The vlan type of port. Enumeration: 'access': 0, 'hybrid': 2, 'trunk': 1.
portDefaultVid	1.3.6.1.4.1.8691.7.116.1.19.1.1.2	integer	read-write	The PVID of port.
portFixedVid	1.3.6.1.4.1.8691.7.116.1.19.1.1.3	displaystring	read-write	The fixed vids of (trunk) port.
portForbiddenVid	1.3.6.1.4.1.8691.7.116.1.19.1.1.4	displaystring	read-write	The forbidden vids of (trunk)port.
portFixedVidUntag	1.3.6.1.4.1.8691.7.116.1.19.1.1.5	displaystring	read-write	The fixed untag vids of (trunk) port.
vlanTable	1.3.6.1.4.1.8691.7.116.1.19.2		no-access	The VLAN table.
vlanEntry	1.3.6.1.4.1.8691.7.116.1.19.2.1		no-access	VLAN Entry.
vlanId	1.3.6.1.4.1.8691.7.116.1.19.2.1.1	integer	read-only	The VLAN id.
joinedAccessPorts	1.3.6.1.4.1.8691.7.116.1.19.2.1.2	portlist	read-only	The access ports that joined this VID.
joinedTrunkPorts	1.3.6.1.4.1.8691.7.116.1.19.2.1.3	portlist	read-only	The trunk ports that joined this VID.
joinedHybridPorts	1.3.6.1.4.1.8691.7.116.1.19.2.1.4	portlist	read-only	The hybrid ports that joined this VID.
managementVlanId	1.3.6.1.4.1.8691.7.116.1.19.3	integer	read-write	The management VLAN id.
vlanType	1.3.6.1.4.1.8691.7.116.1.19.4	integer	read-write	VLAN Type. Enumeration: 'tagBased': 0, 'portBased': 1.
portbaseVlanSettingTable	1.3.6.1.4.1.8691.7.116.1.19.5		no-access	Port base Vlan Setting Table.
portbaseVlanSettingEntry	1.3.6.1.4.1.8691.7.116.1.19.5.1		no-access	Port base Vlan Setting Entry.
portbaseVlanSettingIndex	1.3.6.1.4.1.8691.7.116.1.19.5.1.1	integer	read-only	port base Vlan Group Index.
portbaseVlanMemberPorts	1.3.6.1.4.1.8691.7.116.1.19.5.1.2	portlist	read-write	port base Vlan Group Member Ports.
enableGvrp	1.3.6.1.4.1.8691.7.116.1.19.6	integer	read-write	Enable GVRP. Enumeration: 'enable': 1, 'disable': 0.
multicastFiltering	1.3.6.1.4.1.8691.7.116.1.20
igmpSnooping	1.3.6.1.4.1.8691.7.116.1.20.1
querierQueryInterval	1.3.6.1.4.1.8691.7.116.1.20.1.1	integer	read-write	This query interval of the querier function for this VLAN.
igmpSnoopingSettingTable	1.3.6.1.4.1.8691.7.116.1.20.1.2		no-access	The IGMP snooping setting table.
igmpSnoopingSettingEntry	1.3.6.1.4.1.8691.7.116.1.20.1.2.1		no-access	The IGMP snooping setting Entry.
enableIgmpSnooping	1.3.6.1.4.1.8691.7.116.1.20.1.2.1.1	integer	read-write	This enable the IGMP snooping functon in this VLAN. Enumeration: 'enable': 1, 'disable': 0.
enableQuerier	1.3.6.1.4.1.8691.7.116.1.20.1.2.1.2	integer	read-write	This enable the querier function for this VLAN. Enumeration: 'igmpv3': 2, 'igmpv2': 1, 'disable': 0.
fixedMulticastQuerierPorts	1.3.6.1.4.1.8691.7.116.1.20.1.2.1.3	portlist	read-write	The ports that multicast-Querier exist.
learnedMulticastQuerierPorts	1.3.6.1.4.1.8691.7.116.1.20.1.2.1.4	portlist	read-only	The ports that multicast-Querier exist.
enableGlobalIgmpSnooping	1.3.6.1.4.1.8691.7.116.1.20.1.4	integer	read-write	This enable the IGMP snooping functon . Enumeration: 'enable': 1, 'disable': 0.
multicastFastForwarding	1.3.6.1.4.1.8691.7.116.1.20.1.7	integer	read-write	This Enable Multicast Fast Forwarding Mode functon . Enumeration: 'enable': 1, 'disable': 0.
staticMulticast	1.3.6.1.4.1.8691.7.116.1.20.2
staticMulticastTable	1.3.6.1.4.1.8691.7.116.1.20.2.1		no-access	The static multicast table.
staticMulticastEntry	1.3.6.1.4.1.8691.7.116.1.20.2.1.1		no-access	Static multicast Entry.
staticMulticastAddress	1.3.6.1.4.1.8691.7.116.1.20.2.1.1.1	macaddress	read-only	The static multicast address.
staticMulticastPorts	1.3.6.1.4.1.8691.7.116.1.20.2.1.1.2	portlist	read-only	The port map of the static multicast address.
staticMulticastStatus	1.3.6.1.4.1.8691.7.116.1.20.2.1.1.3	integer	read-only	The status is active to indicate normal. Use createAndGo to create new on multiple SET. Use createAndWait to create new on one SET all then actvie. Use destroy to delete this row. Enumeration: 'active': 1, 'destroy': 6, 'createAndGo': 4, 'createAndWait': 5.
gmrp	1.3.6.1.4.1.8691.7.116.1.20.3
gmrpSettingTable	1.3.6.1.4.1.8691.7.116.1.20.3.1		no-access	The GMRP setting table.
gmrpSettingEntry	1.3.6.1.4.1.8691.7.116.1.20.3.1.1		no-access	The GMRP Setting Entry.
enableGMRP	1.3.6.1.4.1.8691.7.116.1.20.3.1.1.1	integer	read-write	Enable/Disable GMRP. Enumeration: 'enable': 1, 'disable': 0.
gmrpTable	1.3.6.1.4.1.8691.7.116.1.20.3.2		no-access	The GMRP status table.
gmrpEntry	1.3.6.1.4.1.8691.7.116.1.20.3.2.1		no-access	The GMRP Status Entry.
gmrpMulticastGroup	1.3.6.1.4.1.8691.7.116.1.20.3.2.1.1	macaddress	read-only	GMRP multicast group.
gmrpFixedPorts	1.3.6.1.4.1.8691.7.116.1.20.3.2.1.2	portlist	read-only	The ports that joined GMRP multicast group manually.
gmrpLearnedPorts	1.3.6.1.4.1.8691.7.116.1.20.3.2.1.3	portlist	read-only	The ports that joined GMRP multicast group by GMRP learning.
mfb	1.3.6.1.4.1.8691.7.116.1.20.4
mfbSettingTable	1.3.6.1.4.1.8691.7.116.1.20.4.1		no-access	The Multicast Filtering Behavior setting table.
mfbSettingEntry	1.3.6.1.4.1.8691.7.116.1.20.4.1.1		no-access	The Multicast Filtering Behavior Setting Entry.
filterBehavior	1.3.6.1.4.1.8691.7.116.1.20.4.1.1.1	integer	read-write	Port forward multicast packet behavior. Enumeration: 'forwardUnknown': 2, 'filterUnknown': 3.
rateLimiting	1.3.6.1.4.1.8691.7.116.1.21
normalModeRateLimitingTable	1.3.6.1.4.1.8691.7.116.1.21.1		no-access	The rate limiting table.
normalModeRateLimitingEntry	1.3.6.1.4.1.8691.7.116.1.21.1.1		no-access	Rate limiting Entry.
ingressLimitRate	1.3.6.1.4.1.8691.7.116.1.21.1.1.1	integer	read-write	The ingress limit mode. Enumeration: 'percentage85': 9, 'percentage65': 8, 'percentage03': 1, 'percentage35': 6, 'notlimited': 0, 'percentage50': 7, 'percentage05': 2, 'percentage15': 4, 'percentage25': 5, 'percentage10': 3.
egressLimit	1.3.6.1.4.1.8691.7.116.1.21.1.1.2	integer	read-write	The ingress limit mode. Enumeration: 'percentage85': 9, 'percentage65': 8, 'percentage03': 1, 'percentage35': 6, 'notlimited': 0, 'percentage50': 7, 'percentage05': 2, 'percentage15': 4, 'percentage25': 5, 'percentage10': 3.
broadcastStormProtection	1.3.6.1.4.1.8691.7.116.1.21.2
enableBcastStormProtection	1.3.6.1.4.1.8691.7.116.1.21.2.1	integer	read-write	Enable Broadcast Storm Protection Enumeration: 'enable': 1, 'disable': 0.
bcastStormIncludeMcast	1.3.6.1.4.1.8691.7.116.1.21.2.2	integer	read-write	Broadcast Storm Protection includes Multicast packets Enumeration: 'yes': 1, 'no': 0.
bcastStormIncludeUnkonwnMcastUcast	1.3.6.1.4.1.8691.7.116.1.21.2.3	integer	read-write	Broadcast Storm Protection includes Unkonwn Multicast and Unknown Unicast Packet packets Enumeration: 'yes': 1, 'no': 0.
unicastFilterBehavior	1.3.6.1.4.1.8691.7.116.1.21.2.4
ufbIncludeUnkonwnUcast	1.3.6.1.4.1.8691.7.116.1.21.2.4.1	integer	read-write	Unicast Filter Behavior includes Unknown Unicast packets Enumeration: 'yes': 1, 'no': 0.
portDisableMode	1.3.6.1.4.1.8691.7.116.1.21.3
portDisableModePeriod	1.3.6.1.4.1.8691.7.116.1.21.3.1	integer	read-write	Check time.
portDisableModeTable	1.3.6.1.4.1.8691.7.116.1.21.3.2		no-access	The rate limiting table.
portDisableModeEntry	1.3.6.1.4.1.8691.7.116.1.21.3.2.1		no-access	Rate limiting Entry.
ingressLimit	1.3.6.1.4.1.8691.7.116.1.21.3.2.1.1	integer	read-write	The ingress limit mode. Enumeration: 'rateMega4Fps22322': 4, 'rateMega1Fps4464': 1, 'rateGiga6Fps520840': 13, 'rateMega7Fps74405': 7, 'rateGiga3Fps148810': 10, 'rateGiga2Fps74410': 9, 'rateGiga7Fps744050': 14, 'notlimited': 0, 'rateGiga5Fps372030': 12, 'rateMega3Fps14881': 3, 'rateMega2Fps7441': 2, 'rateMega5Fps37203': 5, 'rateGiga1Fps44640': 8, 'rateGiga4Fps223220': 11, 'rateMega6Fps52084': 6.
rateLimitingMode	1.3.6.1.4.1.8691.7.116.1.21.4	integer	read-write	The rate limiting mode. Enumeration: 'portDisable': 1, 'normal': 0.
security	1.3.6.1.4.1.8691.7.116.1.22
userLoginSetting	1.3.6.1.4.1.8691.7.116.1.22.1
userLoginServer	1.3.6.1.4.1.8691.7.116.1.22.1.1	integer	read-write	Set user login server option. Enumeration: 'tacacs': 1, 'radius': 2.
tacacsServerSetting	1.3.6.1.4.1.8691.7.116.1.22.1.2
tacacsLoginAuthServer	1.3.6.1.4.1.8691.7.116.1.22.1.2.1	displaystring	read-write	Set Tacacs+ Server IP Address/Domain name.
tacacsLoginAuthPort	1.3.6.1.4.1.8691.7.116.1.22.1.2.2	integer	read-write	Set Tacacs+ Port.
tacacsLoginAuthSharedKey	1.3.6.1.4.1.8691.7.116.1.22.1.2.3	displaystring	read-write	Set Tacacs+ Shared Key.
tacacsLoginAuthAuthType	1.3.6.1.4.1.8691.7.116.1.22.1.2.4	integer	read-write	Set Tacacs+ Shared Key. Enumeration: 'pap': 1, 'mschap': 4, 'chap': 2, 'ascii': 0.
tacacsLoginAuthTimeout	1.3.6.1.4.1.8691.7.116.1.22.1.2.5	integer	read-write	Set Tacacs+ Shared Key.
radiusServerSetting	1.3.6.1.4.1.8691.7.116.1.22.1.3
radiusLoginAuthServer	1.3.6.1.4.1.8691.7.116.1.22.1.3.1	displaystring	read-write	Set Radius Server IP Address/Domain name.
radiusLoginAuthPort	1.3.6.1.4.1.8691.7.116.1.22.1.3.2	integer	read-write	Set Radius Port.
radiusLoginAuthSharedKey	1.3.6.1.4.1.8691.7.116.1.22.1.3.3	displaystring	read-write	Set Radius Shared Key.
radiusLoginAuthAuthType	1.3.6.1.4.1.8691.7.116.1.22.1.3.4	integer	read-write	Set Radius Shared Key. Enumeration: 'eap-md5': 0.
radiusLoginAuthTimeout	1.3.6.1.4.1.8691.7.116.1.22.1.3.5	integer	read-write	Set Radius Shared Key.
portAccessControl	1.3.6.1.4.1.8691.7.116.1.22.2
staticPortLock	1.3.6.1.4.1.8691.7.116.1.22.2.1
staticPortLockAddress	1.3.6.1.4.1.8691.7.116.1.22.2.1.1	macaddress	read-only	The static port lock address.
staticPortLockPort	1.3.6.1.4.1.8691.7.116.1.22.2.1.2	integer	read-only	The port of the static port lock address.
staticPortLockStatus	1.3.6.1.4.1.8691.7.116.1.22.2.1.3	integer	read-only	The status is active to indicate normal. Use createAndGo to create new on multiple SET. Enumeration: 'active': 1, 'createAndGo': 4.
dot1x	1.3.6.1.4.1.8691.7.116.1.22.2.2
dataBaseOption	1.3.6.1.4.1.8691.7.116.1.22.2.2.1	integer	read-write	Set IEEE 802.1X database option. Enumeration: 'radius': 2, 'radiuslocal': 3, 'local': 1.
dot1xReauthEnable	1.3.6.1.4.1.8691.7.116.1.22.2.2.5	integer	read-write	Enable/Disable IEEE 802.1X Re-authentication. Enumeration: 'enable': 1, 'disable': 0.
dot1xReauthPeriod	1.3.6.1.4.1.8691.7.116.1.22.2.2.6	integer	read-write	Set IEEE 802.1X Re-authentication Period.
dot1xSettingTable	1.3.6.1.4.1.8691.7.116.1.22.2.2.7		no-access	IEEE 802.1X Port Setting Table.
dot1xSettingEntry	1.3.6.1.4.1.8691.7.116.1.22.2.2.7.1		no-access	IEEE 802.1X Port Setting Entry.
enableDot1X	1.3.6.1.4.1.8691.7.116.1.22.2.2.7.1.1	integer	read-write	Enable/Disable IEEE 802.1X. Enumeration: 'enable': 1, 'disable': 0.
dot1xReauthTable	1.3.6.1.4.1.8691.7.116.1.22.2.2.8		no-access	IEEE 802.1X Re-authentication Table.
dot1xReauthEntry	1.3.6.1.4.1.8691.7.116.1.22.2.2.8.1		no-access	IEEE 802.1X Re-authentication Entry.
dot1xReauthPortIndex	1.3.6.1.4.1.8691.7.116.1.22.2.2.8.1.1	integer	read-only	IEEE 802.1X Enabled Port Index.
dot1xReauth	1.3.6.1.4.1.8691.7.116.1.22.2.2.8.1.2	integer	read-write	Reauth IEEE 802.1X. Enumeration: 'yes': 1, 'no': 0.
dot1xRadius	1.3.6.1.4.1.8691.7.116.1.22.2.2.9
dot1xSameAsAuthServer	1.3.6.1.4.1.8691.7.116.1.22.2.2.9.1	integer	read-write	Set Radius Server IP Address/Domain name. Enumeration: 'notSame': 0, 'same': 1.
dot1x1stRadiusServer	1.3.6.1.4.1.8691.7.116.1.22.2.2.9.2	displaystring	read-write	Set Radius Server IP Address/Domain name.
dot1x1stRadiusPort	1.3.6.1.4.1.8691.7.116.1.22.2.2.9.3	integer	read-write	Set Radius Port.
dot1x1stRadiusSharedKey	1.3.6.1.4.1.8691.7.116.1.22.2.2.9.4	displaystring	read-write	Set Radius Shared Key.
dot1x2ndRadiusServer	1.3.6.1.4.1.8691.7.116.1.22.2.2.9.5	displaystring	read-write	Set Radius Server IP Address/Domain name.
dot1x2ndRadiusPort	1.3.6.1.4.1.8691.7.116.1.22.2.2.9.6	integer	read-write	Set Radius Port.
dot1x2ndRadiusSharedKey	1.3.6.1.4.1.8691.7.116.1.22.2.2.9.7	displaystring	read-write	Set Radius Shared Key.
portAccessControlTable	1.3.6.1.4.1.8691.7.116.1.22.2.3		no-access	The Port Access Control table.
portAccessControlEntry	1.3.6.1.4.1.8691.7.116.1.22.2.3.1		no-access	The Port Access Control table entry.
portAccessControlAddress	1.3.6.1.4.1.8691.7.116.1.22.2.3.1.1	macaddress	read-only	The MAC address which is static locked or IEEE 802.1X authorized.
portAccessControlPortNo	1.3.6.1.4.1.8691.7.116.1.22.2.3.1.2	integer	read-only	The port number that the Port Access Control address resides.
portAccessControlAccessStatus	1.3.6.1.4.1.8691.7.116.1.22.2.3.1.3	integer	read-only	The access status of the Port Access Control address. Enumeration: 'staticLock': 1, 'authorized': 2, 'unAuthorized': 3, 'authorizing': 4.
portAccessControlStatus	1.3.6.1.4.1.8691.7.116.1.22.2.3.1.4	integer	read-only	The status is active to indicate normal. Use createAndGo to create new on multiple SET. Use createAndWait to create new on one SET all then actvie. Use destroy to delete this row. Enumeration: 'active': 1, 'destroy': 6, 'createAndGo': 4, 'createAndWait': 5.
accessibleIP	1.3.6.1.4.1.8691.7.116.1.30
enableAccessibleIP	1.3.6.1.4.1.8691.7.116.1.30.1	integer	read-write	Enable the accessible IP address list. Enumeration: 'enable': 1, 'disable': 0.
accessibleIpTable	1.3.6.1.4.1.8691.7.116.1.30.2		no-access	accessibleIP.
accessibleIpEntry	1.3.6.1.4.1.8691.7.116.1.30.2.1		no-access	Accessible IP address entry.
accessibleIpAddress	1.3.6.1.4.1.8691.7.116.1.30.2.1.1	ipaddress	read-only	Accessible IP address
accessibleIpNetMask	1.3.6.1.4.1.8691.7.116.1.30.2.1.2	ipaddress	read-only	Accessible IP netmask.
accessibleIpStatus	1.3.6.1.4.1.8691.7.116.1.30.2.1.3	integer	read-only	The status is active to indicate normal. Use createAndGo to create new on multiple SET. Use createAndWait to create new on one SET all then actvie. Use destroy to delete this row. Enumeration: 'active': 1, 'destroy': 6, 'createAndGo': 4, 'createAndWait': 5.
sysFileUpdate	1.3.6.1.4.1.8691.7.116.1.31
tftpServer	1.3.6.1.4.1.8691.7.116.1.31.1	displaystring	read-write	The TFTP Server name(IP Address)
firmwarePathName	1.3.6.1.4.1.8691.7.116.1.31.2	displaystring	read-write	The path name of firmware file in the TFTP Server
logPathName	1.3.6.1.4.1.8691.7.116.1.31.3	displaystring	read-write	The path name of log file in the TFTP Server
confPathName	1.3.6.1.4.1.8691.7.116.1.31.4	displaystring	read-write	The path name of configuration file in the TFTP Server
tftpUpdate	1.3.6.1.4.1.8691.7.116.1.31.5	integer	read-only	Enumeration: 'importConfig': 2, 'importFirmware': 1, 'exportConfig': 3, 'exportLog': 4.
timeSetting	1.3.6.1.4.1.8691.7.116.1.32
sysDateTime	1.3.6.1.4.1.8691.7.116.1.32.1	dateandtime	read-write	The date time of system
calibratePeriod	1.3.6.1.4.1.8691.7.116.1.32.2	integer	read-write	The period (seconds) that calibrate with time server
timeServer1	1.3.6.1.4.1.8691.7.116.1.32.3	displaystring	read-write	The first time server
timeServer2	1.3.6.1.4.1.8691.7.116.1.32.4	displaystring	read-write	The second time server
daylightSaving	1.3.6.1.4.1.8691.7.116.1.32.5
startMonth	1.3.6.1.4.1.8691.7.116.1.32.5.1	integer	read-write	Setting Start Month of Daylight Saving time Enumeration: 'mar': 3, 'feb': 2, 'aug': 8, 'sep': 9, 'apr': 4, 'na': 0, 'jun': 6, 'jul': 7, 'jan': 1, 'may': 5, 'nov': 11, 'dec': 12, 'oct': 10.
startWeek	1.3.6.1.4.1.8691.7.116.1.32.5.2	integer	read-write	Setting Start Week of Daylight Saving time Enumeration: 'na': 0, 'weeklast': 6, 'week1': 1, 'week3': 3, 'week2': 2, 'week4': 4.
startDay	1.3.6.1.4.1.8691.7.116.1.32.5.3	integer	read-write	Setting Start Day of Daylight Saving time Enumeration: 'wed': 4, 'na': 0, 'th': 5, 'mon': 2, 'sun': 1, 'fri': 6, 'tue': 3, 'sat': 7.
startHour	1.3.6.1.4.1.8691.7.116.1.32.5.4	integer	read-write	Setting Start Hour of Daylight Saving time
endMonth	1.3.6.1.4.1.8691.7.116.1.32.5.5	integer	read-write	Setting End Month of Daylight Saving time Enumeration: 'mar': 3, 'feb': 2, 'aug': 8, 'sep': 9, 'apr': 4, 'na': 0, 'jun': 6, 'jul': 7, 'jan': 1, 'may': 5, 'nov': 11, 'dec': 12, 'oct': 10.
endWeek	1.3.6.1.4.1.8691.7.116.1.32.5.6	integer	read-write	Setting End Week of Daylight Saving time Enumeration: 'na': 0, 'weeklast': 6, 'week1': 1, 'week3': 3, 'week2': 2, 'week4': 4.
endDay	1.3.6.1.4.1.8691.7.116.1.32.5.7	integer	read-write	Setting End Day of Daylight Saving time Enumeration: 'wed': 4, 'na': 0, 'th': 5, 'mon': 2, 'sun': 1, 'fri': 6, 'tue': 3, 'sat': 7.
endHour	1.3.6.1.4.1.8691.7.116.1.32.5.8	integer	read-write	Setting End Hour of Daylight Saving time
offsetHours	1.3.6.1.4.1.8691.7.116.1.32.5.9	integer	read-write	Setting Offset Hours of Daylight Saving time
enableNTPServer	1.3.6.1.4.1.8691.7.116.1.32.6	integer	read-write	This enable NTP Server. Enumeration: 'enable': 1, 'disable': 0.
clockSource	1.3.6.1.4.1.8691.7.116.1.32.7	integer	read-write	The clock source of system Enumeration: 'ntp': 2, 'local': 0, 'sntp': 1.
backupMediaSetting	1.3.6.1.4.1.8691.7.116.1.35
abc02Status	1.3.6.1.4.1.8691.7.116.1.35.2	integer	read-only	Current status of ABC-02 Enumeration: 'detecting': 2, 'ready-and-removable': 4, 'working': 3, 'device-not-present': 0, 'unauthorized-media': 1.
abc02AutoImportConfig	1.3.6.1.4.1.8691.7.116.1.35.3	integer	read-write	Auto load configuration from ABC to system when boot up Enumeration: 'enable': 1, 'disable': 0.
abc02AutoExportConfig	1.3.6.1.4.1.8691.7.116.1.35.4	integer	read-write	Auto backup to ABC-02 when configuration change Enumeration: 'enable': 1, 'disable': 0.
abc02AutoExportLog	1.3.6.1.4.1.8691.7.116.1.35.5	integer	read-write	Auto backup of event log to prevent overwrite Enumeration: 'enable': 1, 'disable': 0.
enableWarmStart	1.3.6.1.4.1.8691.7.116.1.36	integer	read-write	Enable to restart MOXA ethernet switch. Enumeration: 'yes': 1, 'no': 0.
syslogSetting	1.3.6.1.4.1.8691.7.116.1.37
syslogServer1	1.3.6.1.4.1.8691.7.116.1.37.1	displaystring	read-write	The syslog server 1
syslogServer1port	1.3.6.1.4.1.8691.7.116.1.37.2	integer	read-write	The syslog server 1 port
syslogServer2	1.3.6.1.4.1.8691.7.116.1.37.3	displaystring	read-write	The syslog server 2
syslogServer2port	1.3.6.1.4.1.8691.7.116.1.37.4	integer	read-write	The syslog server 2 port
syslogServer3	1.3.6.1.4.1.8691.7.116.1.37.5	displaystring	read-write	The syslog server 3
syslogServer3port	1.3.6.1.4.1.8691.7.116.1.37.6	integer	read-write	The syslog server 3 port
dhcpRelayAgentSetting	1.3.6.1.4.1.8691.7.116.1.39
dhcpServer1	1.3.6.1.4.1.8691.7.116.1.39.1	displaystring	read-write	The dhcp Relay Agent Server 1.
dhcpServer2	1.3.6.1.4.1.8691.7.116.1.39.2	displaystring	read-write	The dhcp Relay Agent Server 2.
dhcpServer3	1.3.6.1.4.1.8691.7.116.1.39.3	displaystring	read-write	The dhcp Relay Agent Server 3.
dhcpServer4	1.3.6.1.4.1.8691.7.116.1.39.4	displaystring	read-write	The dhcp Relay Agent Server 4.
option82Setting	1.3.6.1.4.1.8691.7.116.1.39.5
enableOption82	1.3.6.1.4.1.8691.7.116.1.39.5.1	integer	read-write	Enable DHCP Option 82 Enumeration: 'enable': 1, 'disable': 0.
option82Type	1.3.6.1.4.1.8691.7.116.1.39.5.2	integer	read-write	Option 82 Type selector Enumeration: 'client-id': 2, 'ip': 0, 'mac': 1, 'other': 3.
option82Value	1.3.6.1.4.1.8691.7.116.1.39.5.3	displaystring	read-write	Option 82 Type Value
option82ValueDisplay	1.3.6.1.4.1.8691.7.116.1.39.5.4	displaystring	read-only	Option 82 Type Value Display
dhcpFunctionTable	1.3.6.1.4.1.8691.7.116.1.39.6		no-access	DHCP Function Table.
dhcpFunctionTableEntry	1.3.6.1.4.1.8691.7.116.1.39.6.1		no-access	DHCP Function Table Entry.
dhcpPortIndex	1.3.6.1.4.1.8691.7.116.1.39.6.1.1	integer	read-only	The DHCP Port Index.
circuitID	1.3.6.1.4.1.8691.7.116.1.39.6.1.2	displaystring	read-only	The Circuit ID.
option82Enable	1.3.6.1.4.1.8691.7.116.1.39.6.1.3	integer	read-write	This enable option 82 of the port. Enumeration: 'enable': 1, 'disable': 0.
ieee1588Setting	1.3.6.1.4.1.8691.7.116.1.41
ptpv1Setting	1.3.6.1.4.1.8691.7.116.1.41.1
enablePtpv1	1.3.6.1.4.1.8691.7.116.1.41.1.1	integer	read-write	This enable the PTP functon. Enumeration: 'enable': 1, 'disable': 0.
clockModev1	1.3.6.1.4.1.8691.7.116.1.41.1.2	integer	read-write	the clock mode of the PTP clock. Enumeration: 'v2E2EBC': 4, 'v2E2E2stepTC': 1, 'v2P2PBC': 5, 'v2P2PTC': 3, 'v1BC': 0.
syncIntervalv1	1.3.6.1.4.1.8691.7.116.1.41.1.3	integer	read-write	the logSyncInterval of the PTP clock. Enumeration: 'sixteenSec': 4, 'eightSec': 3, 'fourSec': 2, 'oneSec': 0, 'twoSec': 1.
subDomainNamev1	1.3.6.1.4.1.8691.7.116.1.41.1.4	integer	read-write	The subdomain name of the PTP clock. Enumeration: 'alt3': 3, 'alt1': 1, 'dflt': 0, 'alt2': 2.
preferMasterv1	1.3.6.1.4.1.8691.7.116.1.41.1.5	integer	read-write	This enable the PTP prefer master function. Enumeration: 'true': 1, 'false': 0.
ptpv2Setting	1.3.6.1.4.1.8691.7.116.1.41.2
enablePtp	1.3.6.1.4.1.8691.7.116.1.41.2.1	integer	read-write	This enable the PTP functon. Enumeration: 'enable': 1, 'disable': 0.
clockMode	1.3.6.1.4.1.8691.7.116.1.41.2.2	integer	read-write	the clock mode of the PTP clock. Enumeration: 'v2E2EBC': 4, 'v2E2E2stepTC': 1, 'v2P2PBC': 5, 'v2P2PTC': 3, 'v1BC': 0.
transport	1.3.6.1.4.1.8691.7.116.1.41.2.3	integer	read-write	the transport mode of the PTP clock. Enumeration: 'ieee802dot3': 0, 'ipv4': 1.
syncInterval	1.3.6.1.4.1.8691.7.116.1.41.2.4	integer	read-write	the logSyncInterval of the PTP clock. Enumeration: 't2sec': 1, 't256msec': -2, 't512msec': -1, 't1sec': 0, 't128msec': -3.
logMinDelayReqInterval	1.3.6.1.4.1.8691.7.116.1.41.2.5	integer	read-write	the logMinDelayReqInterval of the PTP clock. Enumeration: 't32sec': 5, 't4sec': 2, 't2sec': 1, 't1sec': 0, 't8sec': 3, 't16sec': 4.
logMinPdelayReqInterval	1.3.6.1.4.1.8691.7.116.1.41.2.6	integer	read-write	the logMinPdelayReqInterval of the PTP clock. Enumeration: 't32sec': 5, 't4sec': 2, 't2sec': 1, 't1sec': 0, 't8sec': 3, 't512msec': -1, 't16sec': 4.
logAnnounceInterval	1.3.6.1.4.1.8691.7.116.1.41.2.7	integer	read-write	the logAnnounceInterval of the PTP clock. Enumeration: 't4sec': 2, 't16sec': 4, 't2sec': 1, 't1sec': 0, 't8sec': 3.
announceReceiptTimeout	1.3.6.1.4.1.8691.7.116.1.41.2.8	integer	read-write	the announceReceiptTimeout of the PTP clock.
priority1	1.3.6.1.4.1.8691.7.116.1.41.2.9	integer	read-write	the priority1 of the PTP clock.
priority2	1.3.6.1.4.1.8691.7.116.1.41.2.10	integer	read-write	the priority2 of the PTP clock.
clockClass	1.3.6.1.4.1.8691.7.116.1.41.2.11	integer	read-write	the clockClass of the PTP clock.
domainNumber	1.3.6.1.4.1.8691.7.116.1.41.2.12	integer	read-write	The domain number of the PTP clock. Enumeration: 'alt3': 3, 'alt1': 1, 'dflt': 0, 'alt2': 2.
localUtcOffset	1.3.6.1.4.1.8691.7.116.1.41.2.13	integer	read-write	the UTC offset of the local PTP clock.
localUtcOffsetValid	1.3.6.1.4.1.8691.7.116.1.41.2.14	integer	read-write	the UTC offset valid of the local PTP clock. Enumeration: 'true': 1, 'false': 0.
localLeap59	1.3.6.1.4.1.8691.7.116.1.41.2.15	integer	read-write	the leap59 of the local PTP clock. Enumeration: 'true': 1, 'false': 0.
localLeap61	1.3.6.1.4.1.8691.7.116.1.41.2.16	integer	read-write	the leap61 of the local PTP clock. Enumeration: 'true': 1, 'false': 0.
localPtpTimescale	1.3.6.1.4.1.8691.7.116.1.41.2.17	integer	read-write	the timescale of the local PTP clock. Enumeration: 'arb': 0, 'ptp': 1.
localArbTime	1.3.6.1.4.1.8691.7.116.1.41.2.18	integer	read-write	the ARB time of the local PTP clock.
ptpv1Status	1.3.6.1.4.1.8691.7.116.1.41.3
offsetToMasterv1	1.3.6.1.4.1.8691.7.116.1.41.3.1	integer	read-only	The offset to master for nsec.
meanPathDelayv1	1.3.6.1.4.1.8691.7.116.1.41.3.2	integer	read-only	The mean path delay of the PTP clock.
grandMasterUuidv1	1.3.6.1.4.1.8691.7.116.1.41.3.3	macaddress	read-only	The grand master UUID address of the PTP clock.
parentUuidv1	1.3.6.1.4.1.8691.7.116.1.41.3.4	macaddress	read-only	The parent master UUID address of the PTP clock.
clockStratumv1	1.3.6.1.4.1.8691.7.116.1.41.3.5	integer	read-only	The clock stratum of the PTP clock.
clockIdentifierv1	1.3.6.1.4.1.8691.7.116.1.41.3.6	displaystring	read-only	The clock identifier of the PTP clock.
ptpv2Status	1.3.6.1.4.1.8691.7.116.1.41.4
offsetToMaster	1.3.6.1.4.1.8691.7.116.1.41.4.1	integer	read-only	The offset to master for nsec.
meanPathDelay	1.3.6.1.4.1.8691.7.116.1.41.4.2	integer	read-only	The mean path delay of the PTP clock.
parentIdentity	1.3.6.1.4.1.8691.7.116.1.41.4.3	displaystring	read-only	The parent identity of the PTP clock.
grandmasterIdentity	1.3.6.1.4.1.8691.7.116.1.41.4.4	displaystring	read-only	The grandmaster identity of the PTP clock.
grandmasterClockClass	1.3.6.1.4.1.8691.7.116.1.41.4.5	integer	read-only	The grandmaster clockClass of the PTP clock.
grandmasterClockAccuracy	1.3.6.1.4.1.8691.7.116.1.41.4.6	integer	read-only	The grandmaster clockAccuracy of the PTP clock.
grandmasterPriority1	1.3.6.1.4.1.8691.7.116.1.41.4.7	integer	read-only	The grandmaster priority1 of the PTP clock.
grandmasterPriority2	1.3.6.1.4.1.8691.7.116.1.41.4.8	integer	read-only	The grandmaster priority2 of the PTP clock.
stepsRemoved	1.3.6.1.4.1.8691.7.116.1.41.4.9	integer	read-only	The steps removed of the PTP clock.
currentUtcOffset	1.3.6.1.4.1.8691.7.116.1.41.4.10	integer	read-only	The current utc offset of the PTP clock.
currentUtcOffsetValid	1.3.6.1.4.1.8691.7.116.1.41.4.11	displaystring	read-only	The current utc offset valid flag of the PTP clock.
leap59	1.3.6.1.4.1.8691.7.116.1.41.4.12	displaystring	read-only	The leap59 of the PTP clock.
leap61	1.3.6.1.4.1.8691.7.116.1.41.4.13	displaystring	read-only	The leap61 of the PTP clock.
ptpTimescale	1.3.6.1.4.1.8691.7.116.1.41.4.14	displaystring	read-only	The ptp timescale of the PTP clock.
timesource	1.3.6.1.4.1.8691.7.116.1.41.4.15	displaystring	read-only	The timesource of the PTP clock.
ptpPortTable	1.3.6.1.4.1.8691.7.116.1.41.5		no-access	The ptp port table.
ptpPortEntry	1.3.6.1.4.1.8691.7.116.1.41.5.1		no-access	The ptp port entry.
ptpPortIndex	1.3.6.1.4.1.8691.7.116.1.41.5.1.1	integer	read-only	The ptp port index.
ptpPortEnable	1.3.6.1.4.1.8691.7.116.1.41.5.1.2	integer	read-write	This enable the ptp port. Enumeration: 'enable': 1, 'disable': 0.
ptpPortStatus	1.3.6.1.4.1.8691.7.116.1.41.5.1.3	integer	read-only	This port status of the PTP clock. Enumeration: 'ptpFaulty': 1, 'ptpSlave': 8, 'ptpPassive': 6, 'ptpUncalibrated': 7, 'ptpListening': 3, 'ptpInitializing': 0, 'ptpPreMaster': 4, 'ptpMaster': 5, 'ptpDisabled': 2.
diagnosis	1.3.6.1.4.1.8691.7.116.1.42
lldpSetting	1.3.6.1.4.1.8691.7.116.1.42.1
enableLLDP	1.3.6.1.4.1.8691.7.116.1.42.1.1	integer	read-write	This enable the LLDP functon. Enumeration: 'enable': 1, 'disable': 0.
lldpMSGInterval	1.3.6.1.4.1.8691.7.116.1.42.1.2	integer	read-write	The LLDP message transmit interval.
ageTime	1.3.6.1.4.1.8691.7.116.1.44	integer	read-write	Web Timeout
garpSetting	1.3.6.1.4.1.8691.7.116.1.45
joinTime	1.3.6.1.4.1.8691.7.116.1.45.1	integer	read-write	Join Time (ms).
leaveTime	1.3.6.1.4.1.8691.7.116.1.45.2	integer	read-write	Leave Time (ms).
leaveAllTime	1.3.6.1.4.1.8691.7.116.1.45.3	integer	read-write	Leaveall Time (ms).
eventlog	1.3.6.1.4.1.8691.7.116.1.46
eventlogTable	1.3.6.1.4.1.8691.7.116.1.46.1		no-access	The table of eventlog.
eventlogEntry	1.3.6.1.4.1.8691.7.116.1.46.1.1		no-access	The table entry of eventlog.
eventlogIndex	1.3.6.1.4.1.8691.7.116.1.46.1.1.1	integer	read-only	The index of eventlog entry.
eventlogBootup	1.3.6.1.4.1.8691.7.116.1.46.1.1.2	integer	read-only	The reboot count of the system.
eventlogDate	1.3.6.1.4.1.8691.7.116.1.46.1.1.3	displaystring	read-only	The date of the event occured.
eventlogTime	1.3.6.1.4.1.8691.7.116.1.46.1.1.4	displaystring	read-only	The time of the event occured.
eventlogUptime	1.3.6.1.4.1.8691.7.116.1.46.1.1.5	displaystring	read-only	The time of the event occured after booting up.
eventlogEvent	1.3.6.1.4.1.8691.7.116.1.46.1.1.6	displaystring	read-only	The event which occured in the system.
eventlogClear	1.3.6.1.4.1.8691.7.116.1.46.2	integer	read-write	To clear the eventlog, set value 1 to this field. Enumeration: 'clear': 1, 'noop': 0.
industrialProtocol	1.3.6.1.4.1.8691.7.116.1.47
eipSetting	1.3.6.1.4.1.8691.7.116.1.47.1
enableEtherNetIP	1.3.6.1.4.1.8691.7.116.1.47.1.1	integer	read-write	This enable the EtherNet/IP functon. Enumeration: 'enable': 1, 'disable': 0.
modbusTCPSetting	1.3.6.1.4.1.8691.7.116.1.47.2
enableModbusTCP	1.3.6.1.4.1.8691.7.116.1.47.2.1	integer	read-write	This enable the Modbus TCP functon. Enumeration: 'enable': 1, 'disable': 0.
profinetioSetting	1.3.6.1.4.1.8691.7.116.1.47.3
enableProfinetIO	1.3.6.1.4.1.8691.7.116.1.47.3.1	integer	read-write	This enable the PROFINET IO functon. Enumeration: 'enable': 1, 'disable': 0.
enableFactoryDefault	1.3.6.1.4.1.8691.7.116.1.48	integer	read-write	Reset all EtherDevice switch settings to factory default values Enumeration: 'activate': 1.
consoleLoginMode	1.3.6.1.4.1.8691.7.116.1.51	integer	read-write	This option can change console login mode. Enumeration: 'men': 0, 'cli': 1.
cpuLoading5s	1.3.6.1.4.1.8691.7.116.1.53	integer	read-only	CPU Loading for the past 5 seconds in %.
cpuLoading30s	1.3.6.1.4.1.8691.7.116.1.54	integer	read-only	CPU Loading for the past 30 seconds in %.
cpuLoading300s	1.3.6.1.4.1.8691.7.116.1.55	integer	read-only	CPU Loading for the past 5 minutes in %.
totalMemory	1.3.6.1.4.1.8691.7.116.1.56	integer	read-only	Total size of System RAM.
freeMemory	1.3.6.1.4.1.8691.7.116.1.57	integer	read-only	Total size of free dynamic memory
usedMemory	1.3.6.1.4.1.8691.7.116.1.58	integer	read-only	Total size of used dynamic memory
memoryUsage	1.3.6.1.4.1.8691.7.116.1.59	integer	read-only	The usage of memory size in %.
loopProtection	1.3.6.1.4.1.8691.7.116.1.61	integer	read-write	This enable the Loop Protection functon. Enumeration: 'enable': 1, 'disable': 0.
eventSettings	1.3.6.1.4.1.8691.7.116.1.62
systemEventSettingsTable	1.3.6.1.4.1.8691.7.116.1.62.1		no-access	The system event settings table.
systemEventSettingsEntry	1.3.6.1.4.1.8691.7.116.1.62.1.1		no-access	System Event Settings Entry.
systemEventIndex	1.3.6.1.4.1.8691.7.116.1.62.1.1.1	integer	read-only	Index of system event settings
systemEventActive	1.3.6.1.4.1.8691.7.116.1.62.1.1.2	integer	read-write	Status of active of system event settings Enumeration: 'active': 1, 'inactive': 0.
systemEventName	1.3.6.1.4.1.8691.7.116.1.62.1.1.3	displaystring	read-only	Name of system event settings
systemEventSupport	1.3.6.1.4.1.8691.7.116.1.62.1.1.4	integer	read-only	Status of support modules of system event settings. Enumeration: 'support-SNMP-Trap-Email': 3, 'support-Relay1-Relay2': 24, 'support-Syslog-Relay1-Relay2': 28, 'support-Relay2-only': 16, 'support-SNMPTrap-Relay1-Relay2': 25, 'support-SNMPTrap-only': 1, 'support-Syslog-Relay2': 20, 'support-Syslog-Relay1': 12, 'support-SNMPTrap-Syslog': 5, 'support-Email-Relay2': 18, 'support-Email-Relay1': 10, 'support-all-SNMPTrap-Email-Syslog-Relay1-Relay2': 31, 'support-SNMPTrap-Email-Syslog': 7, 'support-Email-Syslog-Relay2': 22, 'support-Email-Syslog-Relay1': 14, 'support-SNMPTrap-Relay2': 17, 'support-SNMPTrap-Relay1': 9, 'support-SNMPTrap-Email-Syslog-Relay2': 23, 'support-SNMPTrap-Email-Syslog-Relay1': 15, 'support-SNMPTrap-Syslog-Relay2': 21, 'support-SNMPTrap-Syslog-Relay1': 13, 'support-SNMPTrap-Email-Relay1': 11, 'support-SNMPTrap-Email-Relay2': 19, 'support-Syslog-only': 4, 'none': 0, 'support-Relay1-only': 8, 'support-Email-only': 2, 'support-Email-Syslog': 6, 'support-Email-Syslog-Relay1-Relay2': 30.
systemEventModuleEnable	1.3.6.1.4.1.8691.7.116.1.62.1.1.5	integer	read-write	Status of enable of system event settings. Enumeration: 'enable-SNMPTrap-Relay1-Relay2': 25, 'enable-Email-Syslog-Relay1-Relay2': 30, 'enable-Syslog-Relay1-Relay2': 28, 'enable-Email-Syslog-Relay2': 22, 'enable-Email-Syslog-Relay1': 14, 'enable-SNMPTrap-Email': 3, 'enable-Relay1-only': 8, 'enable-Email-only': 2, 'enable-Syslog-Relay2': 20, 'enable-Syslog-Relay1': 12, 'enable-SNMPTrap-Syslog': 5, 'enable-Email-Syslog': 6, 'enable-SNMPTrap-Email-Relay1': 11, 'enable-SNMPTrap-Email-Relay2': 19, 'enable-All-SNMPTrap-Email-Syslog-Relay1-Relay2': 31, 'enable-Email-Relay1': 10, 'enable-Email-Relay2': 18, 'enable-SNMPTrap-Syslog-Relay1': 13, 'enable-SNMPTrap-Syslog-Relay2': 21, 'enable-SNMPTrap-Email-Syslog-Relay1': 15, 'enable-SNMPTrap-Relay2': 17, 'enable-SNMPTrap-Relay1': 9, 'enable-SNMPTrap-Email-Syslog-Relay2': 23, 'none': 0, 'enable-Relay1-Relay2': 24, 'enable-Syslog-only': 4, 'enable-Relay2-only': 16, 'enable-SNMPTrap-only': 1, 'enable-SNMPTrap-Email-Syslog': 7.
systemEventSeverity	1.3.6.1.4.1.8691.7.116.1.62.1.1.6	integer	read-write	Severity of system event settings Enumeration: 'information': 6, 'notice': 5, 'emergency': 0, 'alert': 1, 'critical': 2, 'error': 3, 'debug': 7, 'warning': 4.
portEventSettingsTable	1.3.6.1.4.1.8691.7.116.1.62.2		no-access	The port event settings table.
portEventSettingsEntry	1.3.6.1.4.1.8691.7.116.1.62.2.1		no-access	Port Event Settings Entry.
portEventIndex	1.3.6.1.4.1.8691.7.116.1.62.2.1.1	integer	read-only	Index of port event settings
portEventLabel	1.3.6.1.4.1.8691.7.116.1.62.2.1.2	displaystring	read-only	Label of portEventIndex
portEventActive	1.3.6.1.4.1.8691.7.116.1.62.2.1.3	integer	read-write	Status of active of port event settings Enumeration: 'active': 1, 'inactive': 0.
portEventEnable	1.3.6.1.4.1.8691.7.116.1.62.2.1.4	integer	read-write	Status of event enable of port event settings Enumeration: 'none': 0, 'enable-LinkOn-LinkOff': 3, 'enable-LinkOn-only': 1, 'enable-LinkOff-TrafficOverload': 6, 'enable-All-LinkOn-LinkOff-TrafficOverload': 7, 'enable-LinkOn-TrafficOverload': 5, 'enable-TrafficOverload-only': 4, 'enable-LinkOff-only': 2.
portEventTrafficThreshold	1.3.6.1.4.1.8691.7.116.1.62.2.1.5	integer	read-write	Threshold of Traffic-Overload in percentage(%)
portEventTrafficDuration	1.3.6.1.4.1.8691.7.116.1.62.2.1.6	integer	read-write	Duration of Traffic-Overload in secs(s)
portEventModuleEnable	1.3.6.1.4.1.8691.7.116.1.62.2.1.7	integer	read-write	Status of module enable of port event settings. Enumeration: 'enable-SNMPTrap-Relay1-Relay2': 25, 'enable-Email-Syslog-Relay1-Relay2': 30, 'enable-Syslog-Relay1-Relay2': 28, 'enable-Email-Syslog-Relay2': 22, 'enable-Email-Syslog-Relay1': 14, 'enable-SNMPTrap-Email': 3, 'enable-Relay1-only': 8, 'enable-Email-only': 2, 'enable-Syslog-Relay2': 20, 'enable-Syslog-Relay1': 12, 'enable-SNMPTrap-Syslog': 5, 'enable-Email-Syslog': 6, 'enable-SNMPTrap-Email-Relay1': 11, 'enable-SNMPTrap-Email-Relay2': 19, 'enable-All-SNMPTrap-Email-Syslog-Relay1-Relay2': 31, 'enable-Email-Relay1': 10, 'enable-Email-Relay2': 18, 'enable-SNMPTrap-Syslog-Relay1': 13, 'enable-SNMPTrap-Syslog-Relay2': 21, 'enable-SNMPTrap-Email-Syslog-Relay1': 15, 'enable-SNMPTrap-Relay2': 17, 'enable-SNMPTrap-Relay1': 9, 'enable-SNMPTrap-Email-Syslog-Relay2': 23, 'none': 0, 'enable-Relay1-Relay2': 24, 'enable-Syslog-only': 4, 'enable-Relay2-only': 16, 'enable-SNMPTrap-only': 1, 'enable-SNMPTrap-Email-Syslog': 7.
portEventSeverity	1.3.6.1.4.1.8691.7.116.1.62.2.1.8	integer	read-write	Severity of port event settings Enumeration: 'information': 6, 'notice': 5, 'emergency': 0, 'alert': 1, 'critical': 2, 'error': 3, 'debug': 7, 'warning': 4.
managementInterface	1.3.6.1.4.1.8691.7.116.1.63
httpEnable	1.3.6.1.4.1.8691.7.116.1.63.1	integer	read-write	Status of http service Enumeration: 'enable': 1, 'disable': 0.
httpPort	1.3.6.1.4.1.8691.7.116.1.63.2	integer	read-write	Port of http service
sslEnable	1.3.6.1.4.1.8691.7.116.1.63.3	integer	read-write	Status of ssl(https) service Enumeration: 'enable': 1, 'disable': 0.
sslPort	1.3.6.1.4.1.8691.7.116.1.63.4	integer	read-write	Port of ssl(https) service
telnetEnable	1.3.6.1.4.1.8691.7.116.1.63.5	integer	read-write	Status of telnet service Enumeration: 'enable': 1, 'disable': 0.
telnetPort	1.3.6.1.4.1.8691.7.116.1.63.6	integer	read-write	Port of telnet service
sshEnable	1.3.6.1.4.1.8691.7.116.1.63.7	integer	read-write	Status of ssh service Enumeration: 'enable': 1, 'disable': 0.
sshPort	1.3.6.1.4.1.8691.7.116.1.63.8	integer	read-write	Port of telnet service
webTimeout	1.3.6.1.4.1.8691.7.116.1.63.9	integer	read-write	Web Timeout (Mins). Set 0 to disable
switchLocator	1.3.6.1.4.1.8691.7.116.1.64
blinkingLocatorLED	1.3.6.1.4.1.8691.7.116.1.64.1	integer	read-write	Blinking switch locator LED. Enumeration: 'on': 1, 'off': 0.
disableLocatorLEDTime	1.3.6.1.4.1.8691.7.116.1.64.2	integer	read-write	Configure back-off time for disable switch locator LED.
uiVersion	1.3.6.1.4.1.8691.7.116.1.65	integer	read-only	New UI Version
swTraps	1.3.6.1.4.1.8691.7.116.2
varconfigChangeTrap	1.3.6.1.4.1.8691.7.116.2.1	integer	read-only	The configuration has been changed. Enumeration: 'none': 1, 'configChanged': 2.
varpower1Trap	1.3.6.1.4.1.8691.7.116.2.2	integer	read-only	The power on/off changed. Enumeration: 'none': 1, 'on2off': 2, 'off2on': 3.
varpower2Trap	1.3.6.1.4.1.8691.7.116.2.3	integer	read-only	The power on/off changed. Enumeration: 'none': 1, 'on2off': 2, 'off2on': 3.
vartrafficOverloadTrap	1.3.6.1.4.1.8691.7.116.2.4	integer	read-only	The ethernet port's traffic loading exceeds the pre-defined value.
varredundancyTopologyChangedTrap	1.3.6.1.4.1.8691.7.116.2.5	integer	read-only	The redundancy topology has been changed. Enumeration: 'topologyChangedTurboChainHead': 3, 'none': 1, 'topologyChanged': 2, 'topologyChangedTurboChainTail': 4.
varturboRingCouplingPortChangedTrap	1.3.6.1.4.1.8691.7.116.2.6	integer	read-only	The coupling path of Turbo Ring has been changed. Enumeration: 'none': 1, 'couplingPortChanged': 2.
varturboRingMasterChangedTrap	1.3.6.1.4.1.8691.7.116.2.7	integer	read-only	The master of Turbo Ring has been changed. Enumeration: 'none': 1, 'ringMasterChanged': 2.
varPoEWarningTrap	1.3.6.1.4.1.8691.7.116.2.16	integer	read-only	The POE warning message. Enumeration: 'pseOverTemperature': 7, 'pdPowerOn': 3, 'exceedSystemThreshold': 5, 'pdOverCurrent': 1, 'exceedSystemPowerBudget': 9, 'pdCheckFail': 2, 'pdPowerOff': 4, 'pseFetBad': 6, 'pseVeeUvlo': 8.
varPortLoopDetectedTrap	1.3.6.1.4.1.8691.7.116.2.17	integer	read-only	The DUT port is looping.
varRateLimitedOnTrap	1.3.6.1.4.1.8691.7.116.2.18	integer	read-only	The DUT port is rate limit. Enumeration: 'none': 1, 'rateLimitOFF': 3, 'rateLimitON': 2.
varLLDPChgTrap	1.3.6.1.4.1.8691.7.116.2.19	integer	read-only	The LLDP table is changing.
varusbWarningTrap	1.3.6.1.4.1.8691.7.116.2.20	integer	read-only	USB warning trap event. Enumeration: 'isDetached': 7, 'autoImportFail': 5, 'noEnoughSpace': 1, 'unauthDevice': 2, 'isAttached': 6, 'exportConfigFail': 3, 'exportLogFail': 4.
varturboRingMasterMismatchTrap	1.3.6.1.4.1.8691.7.116.2.22	integer	read-only	The master of Turbo Ring has been mismatch. Enumeration: 'none': 1, 'ringMasterMismatch': 2.