MOXA-EDSG508E-MIB: View SNMP OID List / Download MIB

VENDOR: MOXA TECHNOLOGIES CO.

Home	MIB: MOXA-EDSG508E-MIB
Download as:		SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC		Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash). Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded. The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.

Object Name	OID	Type	Access	Info
moxa	1.3.6.1.4.1.8691
industrialEthernet	1.3.6.1.4.1.8691.7
edsg508e	1.3.6.1.4.1.8691.7.69			The MIB module for Moxa EDS-G508E series specific information.
mibNotificationsPrefix	1.3.6.1.4.1.8691.7.69.0
configChangeTrap	1.3.6.1.4.1.8691.7.69.0.1			The configuration has been changed.
power1Trap	1.3.6.1.4.1.8691.7.69.0.2			The power on/off changed.
power2Trap	1.3.6.1.4.1.8691.7.69.0.3			The power on/off changed.
trafficOverloadTrap	1.3.6.1.4.1.8691.7.69.0.4			The ethernet port's traffic loading exceeds the pre-defined value.
redundancyTopologyChangedTrap	1.3.6.1.4.1.8691.7.69.0.5			The redundancy topology has been changed.
turboRingCouplingPortChangedTrap	1.3.6.1.4.1.8691.7.69.0.6			The coupling path of Turbo Ring has been changed.
turboRingMasterChangedTrap	1.3.6.1.4.1.8691.7.69.0.7			The master of Turbo Ring has been changed.
portLoopDetectedTrap	1.3.6.1.4.1.8691.7.69.0.17			The DUT port is looping.
rateLimitedOnTrap	1.3.6.1.4.1.8691.7.69.0.18			The DUT port rate limit is ON.
lldpChgTrap	1.3.6.1.4.1.8691.7.69.0.19			The LLDP table is changing.
abc02WarningTrap	1.3.6.1.4.1.8691.7.69.0.20			Warning trap while specific error is occured in abc02.
turboRingMasterMismatchTrap	1.3.6.1.4.1.8691.7.69.0.22			The master of Turbo Ring has been mismatch.
userAuthSuccessTrap	1.3.6.1.4.1.8691.7.69.0.24			Account authentication success.
userAuthFailTrap	1.3.6.1.4.1.8691.7.69.0.25			Account authentication failed.
macStickyPortViolationPortDisableTrap	1.3.6.1.4.1.8691.7.69.0.26			The number of sticky Mac address on the port was over the limit. A macStickyPortViolationPortDisableTrap will contain 3 elements: port, macaddr, and vlanid.
fiberWarningTrap	1.3.6.1.4.1.8691.7.69.0.28			Warning trap while fiber is over threshold.
loggingCapacityTrap	1.3.6.1.4.1.8691.7.69.0.29			Warning trap while event log is over capacity threshold.
userInfoChgTrap	1.3.6.1.4.1.8691.7.69.0.31			Account information has been changed.
configImportTrap	1.3.6.1.4.1.8691.7.69.0.32			Configuration has been imported.
remoteAuthSuccessTrap	1.3.6.1.4.1.8691.7.69.0.38			The login authentication is successful by the remote server
remoteAuthFailTrap	1.3.6.1.4.1.8691.7.69.0.39			The login authentication is failed by the remote server
swMgmt	1.3.6.1.4.1.8691.7.69.1
numberOfPorts	1.3.6.1.4.1.8691.7.69.1.1	integer	read-only	Total Ports.
switchModel	1.3.6.1.4.1.8691.7.69.1.2	displaystring	read-only	The switch model.
firmwareVersion	1.3.6.1.4.1.8691.7.69.1.4	displaystring	read-only	The firmware version.
enableWebConfig	1.3.6.1.4.1.8691.7.69.1.5	integer	read-write	This enable the Web. configuration function. Enumeration: 'httpsOnly': 2, 'disable': 0, 'httpOrHttps': 1.
enableTelnetConsole	1.3.6.1.4.1.8691.7.69.1.6	integer	read-write	This enable telnet console. Enumeration: 'enable': 1, 'disable': 0.
lineSwapRecovery	1.3.6.1.4.1.8691.7.69.1.7	integer	read-write	This enable line-swap-fast-recovery function. Enumeration: 'enable': 1, 'disable': 0.
networkSetting	1.3.6.1.4.1.8691.7.69.1.8
switchIpAddr	1.3.6.1.4.1.8691.7.69.1.8.1	ipaddress	read-only	The IP Address of this switch.
switchIpMask	1.3.6.1.4.1.8691.7.69.1.8.2	ipaddress	read-only	The netmask of this switch.
defaultGateway	1.3.6.1.4.1.8691.7.69.1.8.3	ipaddress	read-only	The default gateway of this switch.
enableAutoIpConfig	1.3.6.1.4.1.8691.7.69.1.8.4	integer	read-write	This enable the automatic IP address configuration function. Enumeration: 'enableBOOTP': 2, 'enableDHCP': 1, 'disable': 0.
dnsServer1IpAddr	1.3.6.1.4.1.8691.7.69.1.8.5	ipaddress	read-write	The first DNS server's IP address
snmpTrapCommunity	1.3.6.1.4.1.8691.7.69.1.8.6	displaystring	read-write	The SNMP trap community name
trapServerAddr	1.3.6.1.4.1.8691.7.69.1.8.7	displaystring	read-write	The IP address/Domain name of SNMP trap server
dnsServer2IpAddr	1.3.6.1.4.1.8691.7.69.1.8.8	ipaddress	read-write	The second DNS server's IP address
snmpReadCommunity	1.3.6.1.4.1.8691.7.69.1.8.9	displaystring	read-write	The SNMP read community name
snmpTrap2Community	1.3.6.1.4.1.8691.7.69.1.8.11	displaystring	read-write	The Second SNMP trap community name
trap2ServerAddr	1.3.6.1.4.1.8691.7.69.1.8.12	displaystring	read-write	The IP address/Domain name of Second SNMP trap server
snmpInformEnable	1.3.6.1.4.1.8691.7.69.1.8.13	integer	read-write	This enable the snmpInform function. Enumeration: 'enable': 1, 'disable': 0.
snmpInformRetries	1.3.6.1.4.1.8691.7.69.1.8.14	integer	read-write	The snmp inform retry times of SNMP trap server
snmpInformTimeout	1.3.6.1.4.1.8691.7.69.1.8.15	integer	read-write	The snmp inform interval of SNMP trap server
dhcpRetryPeriods	1.3.6.1.4.1.8691.7.69.1.8.16	integer	read-write	The DHCP retry periods.
dhcpRetryTimes	1.3.6.1.4.1.8691.7.69.1.8.17	integer	read-write	The dhcp retry times.
trapVersion	1.3.6.1.4.1.8691.7.69.1.8.18	integer	read-write	Version of SNMP trap Enumeration: 'snmpv3-Trap': 3, 'snmpv3-Inform': 4, 'snmpv2-Notification': 1, 'snmpv2-Inform': 2, 'snmpv1-Trap': 0.
snmpVersion	1.3.6.1.4.1.8691.7.69.1.8.21	integer	read-only	Version of SNMP Enumeration: 'snmpv1-v2c-v3': 1, 'snmpv1-v2c': 2, 'snmpv3': 3.
snmpAdminSecurityLevel	1.3.6.1.4.1.8691.7.69.1.8.22	integer	read-only	Admin security level Enumeration: 'noAuthNoPriv': 1, 'authPriv': 3, 'authNoPriv': 2.
snmpUserSecurityLevel	1.3.6.1.4.1.8691.7.69.1.8.23	integer	read-only	User security level Enumeration: 'noAuthNoPriv': 1, 'authPriv': 3, 'authNoPriv': 2.
portSetting	1.3.6.1.4.1.8691.7.69.1.9
portTable	1.3.6.1.4.1.8691.7.69.1.9.1		no-access	The port table.
portEntry	1.3.6.1.4.1.8691.7.69.1.9.1.1		no-access	The port entry.
portIndex	1.3.6.1.4.1.8691.7.69.1.9.1.1.1	integer	read-only	The port index.
portDesc	1.3.6.1.4.1.8691.7.69.1.9.1.1.2	displaystring	read-only	The port description
portEnable	1.3.6.1.4.1.8691.7.69.1.9.1.1.3	integer	read-write	This enable the port. Enumeration: 'enable': 1, 'disable': 0.
portSpeed	1.3.6.1.4.1.8691.7.69.1.9.1.1.4	integer	read-write	The port speed and duplex. Enumeration: 'speed10M-Full': 3, 'auto': 0, 'speed1000M-Full': 5, 'speed100M-Full': 1, 'speed10M-Half': 4, 'speed100M-Half': 2.
portMDI	1.3.6.1.4.1.8691.7.69.1.9.1.1.5	integer	read-write	The port MDI/MDIX. Enumeration: 'na': 0, 'mdi': 2, 'mdiX': 3, 'auto': 1.
portFDXFlowCtrl	1.3.6.1.4.1.8691.7.69.1.9.1.1.6	integer	read-write	The port FDX Flow Control Enumeration: 'enable': 1, 'disable': 0.
portName	1.3.6.1.4.1.8691.7.69.1.9.1.1.7	displaystring	read-write	The port Name
portSubdesc	1.3.6.1.4.1.8691.7.69.1.9.1.1.8	displaystring	read-only	The port second description
monitor	1.3.6.1.4.1.8691.7.69.1.10
power1InputStatus	1.3.6.1.4.1.8691.7.69.1.10.1	integer	read-only	The status of the first power input. Enumeration: 'present': 1, 'not-present': 0.
power2InputStatus	1.3.6.1.4.1.8691.7.69.1.10.2	integer	read-only	The status of the second power input. Enumeration: 'present': 1, 'not-present': 0.
monitorPortTable	1.3.6.1.4.1.8691.7.69.1.10.3		no-access	The port table of monitor function.
monitorPortEntry	1.3.6.1.4.1.8691.7.69.1.10.3.1		no-access	The port table entry of monitor function.
monitorLinkStatus	1.3.6.1.4.1.8691.7.69.1.10.3.1.2	integer	read-only	The port link status. Enumeration: 'on': 1, 'disable': -1, 'off': 0.
monitorSpeed	1.3.6.1.4.1.8691.7.69.1.10.3.1.3	integer	read-only	The port speed and duplex status. Enumeration: 'speed10M-Full': 1, 'speed1000M-Half': 4, 'na': -1, 'speed1000M-Full': 5, 'speed100M-Full': 3, 'speed10M-Half': 0, 'speed100M-Half': 2.
monitorAutoMDI	1.3.6.1.4.1.8691.7.69.1.10.3.1.4	integer	read-only	The port MDI/MDIX status. Enumeration: 'auto': 2, 'mdi': 0, 'mdix': 1, 'na': -1.
monitorTraffic	1.3.6.1.4.1.8691.7.69.1.10.3.1.5	integer	read-only	The trafic loading percentage of port.
monitorFDXFlowCtrl	1.3.6.1.4.1.8691.7.69.1.10.3.1.6	integer	read-only	The Full-Duplex flow control status Enumeration: 'on': 1, 'off': 0.
monitorTxTraffic	1.3.6.1.4.1.8691.7.69.1.10.3.1.7	integer	read-only	The TX traffic loading percentage of port.
monitorRxTraffic	1.3.6.1.4.1.8691.7.69.1.10.3.1.8	integer	read-only	The RTX traffic loading percentage of port.
monitorDiTable	1.3.6.1.4.1.8691.7.69.1.10.4		no-access	The DI table of monitor function.
monitorDiEntry	1.3.6.1.4.1.8691.7.69.1.10.4.1		no-access	The DI table entry of monitor function.
diIndex	1.3.6.1.4.1.8691.7.69.1.10.4.1.1	integer	read-only	The DI index of monitor function
diInputStatus	1.3.6.1.4.1.8691.7.69.1.10.4.1.2	integer	read-only	The DI input status. Enumeration: 'on': 1, 'off': 0.
powerConsumption	1.3.6.1.4.1.8691.7.69.1.10.8	displaystring	read-only	Current power comsuption(Watts). Accurate to second decimal place.
monitorFiberCheckTable	1.3.6.1.4.1.8691.7.69.1.10.11		no-access	The Fiber Check table of monitor function.
monitorFiberCheckEntry	1.3.6.1.4.1.8691.7.69.1.10.11.1		no-access	The fiber check table entry of monitor function.
fiberPort	1.3.6.1.4.1.8691.7.69.1.10.11.1.1	displaystring	read-only	The fiber index of monitor function
fiberModelName	1.3.6.1.4.1.8691.7.69.1.10.11.1.2	displaystring	read-only	The fiber ModelName of monitor function
fiberWaveLength	1.3.6.1.4.1.8691.7.69.1.10.11.1.3	displaystring	read-only	The fiber wavelength
fiberVoltage	1.3.6.1.4.1.8691.7.69.1.10.11.1.4	displaystring	read-only	The fiber Voltage of monitor function
fiberTemperature	1.3.6.1.4.1.8691.7.69.1.10.11.1.5	displaystring	read-only	The fiber Temperature of monitor function
fiberTempWarn	1.3.6.1.4.1.8691.7.69.1.10.11.1.6	displaystring	read-only	The Fiber Temperature warning value of monitor function
fiberTxPower	1.3.6.1.4.1.8691.7.69.1.10.11.1.7	displaystring	read-only	The fiber TX power of monitor function
fiberTxPowerWarn	1.3.6.1.4.1.8691.7.69.1.10.11.1.8	displaystring	read-only	The fiber TX power warning value of monitor function
fiberRxPower	1.3.6.1.4.1.8691.7.69.1.10.11.1.9	displaystring	read-only	The fiber RX power of monitor function
fiberRxPowerWarn	1.3.6.1.4.1.8691.7.69.1.10.11.1.10	displaystring	read-only	The Fiber RX power warning value of monitor function
fiberSN	1.3.6.1.4.1.8691.7.69.1.10.11.1.13	displaystring	read-only	The fiber serial number
emailWarning	1.3.6.1.4.1.8691.7.69.1.11
emailService	1.3.6.1.4.1.8691.7.69.1.11.1
emailWarningSMTPServer	1.3.6.1.4.1.8691.7.69.1.11.1.1	displaystring	read-write	The SMTP server's Ip Address/Domain name of email warning function.
emailWarningFirstRecipientEmailAddr	1.3.6.1.4.1.8691.7.69.1.11.1.2	displaystring	read-write	The first recipient email address of email warning function.
emailWarningSecondRecipientEmailAddr	1.3.6.1.4.1.8691.7.69.1.11.1.3	displaystring	read-write	The second recipient email address of email warning function.
emailWarningThirdRecipientEmailAddr	1.3.6.1.4.1.8691.7.69.1.11.1.4	displaystring	read-write	The third recipient email address of email warning function.
emailWarningFourthRecipientEmailAddr	1.3.6.1.4.1.8691.7.69.1.11.1.5	displaystring	read-write	The fourth recipient email address of email warning function.
emailWarningSMTPPort	1.3.6.1.4.1.8691.7.69.1.11.1.6	integer	read-write	The SMTP server's port of email warning function.
emailWarningSMTPUser	1.3.6.1.4.1.8691.7.69.1.11.1.7	displaystring	read-write	The registered user account for SMTP service of email warning function.
emailWarningSMTPPassword	1.3.6.1.4.1.8691.7.69.1.11.1.8	displaystring	read-write	The registered user password for SMTP service of email warning function.
emailWarningSMTPTLS	1.3.6.1.4.1.8691.7.69.1.11.1.9	integer	read-write	The SMTP server use TLS of email warning function. Enumeration: 'yes': 1, 'no': 0.
emailWarningSMTPAuthMethod	1.3.6.1.4.1.8691.7.69.1.11.1.10	integer	read-write	The SMTP server use login method of email warning function. Enumeration: 'plain': 0, 'login': 1, 'cram-md5': 2.
emailWarningSenderEmailAddr	1.3.6.1.4.1.8691.7.69.1.11.1.11	displaystring	read-write	The sender email address of email warning function.
setDeviceIp	1.3.6.1.4.1.8691.7.69.1.12
setDevIpTable	1.3.6.1.4.1.8691.7.69.1.12.1		no-access	The set devvice IP table.
setDevIpEntry	1.3.6.1.4.1.8691.7.69.1.12.1.1		no-access	The set devvice IP table entry.
setDevIpIndex	1.3.6.1.4.1.8691.7.69.1.12.1.1.1	integer	read-only	The set devvice IP index.
setDevIpCurrentIpofDevice	1.3.6.1.4.1.8691.7.69.1.12.1.1.2	displaystring	read-only	The current IP address of connected to this port.
setDevIpPresentBy	1.3.6.1.4.1.8691.7.69.1.12.1.1.3	integer	read-only	The protocol used that assigning IP to the device. Enumeration: 'rarp': 2, 'dhcpClient': 1, 'bootp': 4, 'no': 0.
setDevIpDedicatedIp	1.3.6.1.4.1.8691.7.69.1.12.1.1.4	ipaddress	read-write	The IP address when assign to the device connected to this port.
mirroring	1.3.6.1.4.1.8691.7.69.1.13
targetPort	1.3.6.1.4.1.8691.7.69.1.13.1	integer	read-write	The mirrored port of mirroring function.
mirroringPort	1.3.6.1.4.1.8691.7.69.1.13.2	integer	read-write	The mirroring port of mirroring function.
monitorDirection	1.3.6.1.4.1.8691.7.69.1.13.3	integer	read-write	The traffic direction of mirroring function. Enumeration: 'biDirectional': 2, 'inputDataStream': 0, 'outputDataStream': 1.
portTrunking	1.3.6.1.4.1.8691.7.69.1.14
trunkSettingTable	1.3.6.1.4.1.8691.7.69.1.14.1		no-access	Port Trunking Setting Table.
trunkSettingEntry	1.3.6.1.4.1.8691.7.69.1.14.1.1		no-access	Port Trunking Setting Entry.
trunkSettingIndex	1.3.6.1.4.1.8691.7.69.1.14.1.1.1	integer	read-only	Trunking Group Index.
trunkType	1.3.6.1.4.1.8691.7.69.1.14.1.1.2	integer	read-write	Trunking Group Type. Enumeration: 'lacp': 2, 'static': 1.
trunkMemberPorts	1.3.6.1.4.1.8691.7.69.1.14.1.1.3	portlist	read-write	Trunking Group Member Ports.
trunkTable	1.3.6.1.4.1.8691.7.69.1.14.2		no-access	Port Trunking Table.
trunkEntry	1.3.6.1.4.1.8691.7.69.1.14.2.1		no-access	Port Trunking Entry.
trunkIndex	1.3.6.1.4.1.8691.7.69.1.14.2.1.1	integer	read-only	Trunking Group Index.
trunkPort	1.3.6.1.4.1.8691.7.69.1.14.2.1.2	integer	read-only	Trunking Group Member Port.
trunkStatus	1.3.6.1.4.1.8691.7.69.1.14.2.1.3	integer	read-only	Trunking Port Status. Enumeration: 'fail': 2, 'standby': 3, 'success': 1.
commRedundancy	1.3.6.1.4.1.8691.7.69.1.16
protocolOfRedundancySetup	1.3.6.1.4.1.8691.7.69.1.16.1	integer	read-write	This set the redundancy protocol of this switch. Enumeration: 'turboRingV2': 3, 'spanningTree': 1, 'turboRing': 2, 'mstp': 5, 'turboChain': 4.
turboRing	1.3.6.1.4.1.8691.7.69.1.16.2
turboRingMaster	1.3.6.1.4.1.8691.7.69.1.16.2.1	integer	read-only	Is this a Master or Slave. Enumeration: 'yes': 1, 'no': 0.
turboRingMasterSetup	1.3.6.1.4.1.8691.7.69.1.16.2.2	integer	read-write	Set this to be Master. Enumeration: 'yes': 1, 'no': 0.
turboRingPortTable	1.3.6.1.4.1.8691.7.69.1.16.2.3		no-access	Turbo Ring Port Table.
turboRingPortEntry	1.3.6.1.4.1.8691.7.69.1.16.2.3.1		no-access	Turbo Ring Port Entry.
turboRingPortIndex	1.3.6.1.4.1.8691.7.69.1.16.2.3.1.1	integer	read-only	Turbo Ring Port Index.
turboRingPortStatus	1.3.6.1.4.1.8691.7.69.1.16.2.3.1.2	integer	read-only	Turbo Ring Port Status. Enumeration: 'portDisabled': 0, 'linkDown': 2, 'learning': 4, 'forwarding': 5, 'notTurboRingPort': 1, 'blocked': 3.
turboRingPortDesignatedBridge	1.3.6.1.4.1.8691.7.69.1.16.2.3.1.3	macaddress	read-only	The MAC address of the bridge which this port considers to be the Designated Bridge for this port's segment.
turboRingPortDesignatedPort	1.3.6.1.4.1.8691.7.69.1.16.2.3.1.4	integer	read-only	The Port Number of the port on the Designated Bridge for this port's segment.
turboRingDesignatedMaster	1.3.6.1.4.1.8691.7.69.1.16.2.6	macaddress	read-only	The MAC address of the bridge which is the Master of the TURBO RING.
turboRingRdntPort1	1.3.6.1.4.1.8691.7.69.1.16.2.7	integer	read-write	The port number of 1st Redundant Port on the TURBO RING.
turboRingRdntPort2	1.3.6.1.4.1.8691.7.69.1.16.2.8	integer	read-write	The port number of 2nd Redundant Port on the TURBO RING.
turboRingEnableCoupling	1.3.6.1.4.1.8691.7.69.1.16.2.9	integer	read-write	This enable the ring coupling function. Enumeration: 'enable': 1, 'disable': 0.
turboRingCouplingPort	1.3.6.1.4.1.8691.7.69.1.16.2.10	integer	read-write	The coupling port of ring coupling function.
turboRingCouplingPortStatus	1.3.6.1.4.1.8691.7.69.1.16.2.11	integer	read-only	The coupling port status of ring coupling function. Enumeration: 'notCouplingPort': 1, 'forwarding': 5, 'linkDown': 2, 'portDisabled': 0, 'blocked': 3.
turboRingControlPort	1.3.6.1.4.1.8691.7.69.1.16.2.12	integer	read-write	The control port of ring coupling function.
turboRingControlPortStatus	1.3.6.1.4.1.8691.7.69.1.16.2.13	integer	read-only	The control port status of ring coupling function. Enumeration: 'portDisabled': 0, 'linkDown': 2, 'inactive': 6, 'active': 7, 'notControlPort': 1, 'forwarding': 5, 'blocked': 3.
turboRingBrokenStatus	1.3.6.1.4.1.8691.7.69.1.16.2.14	integer	read-only	Turbo Ring broken display. Enumeration: 'na': 0, 'broken': 2, 'normal': 1.
spanningTree	1.3.6.1.4.1.8691.7.69.1.16.3
spanningTreeRoot	1.3.6.1.4.1.8691.7.69.1.16.3.1	integer	read-only	The root of spanning tree. Enumeration: 'yes': 1, 'no': 0.
spanningTreeBridgePriority	1.3.6.1.4.1.8691.7.69.1.16.3.2	integer	read-write	The bridge priority of spanning tree protocol. Enumeration: 'priority4096': 4096, 'priority40960': 40960, 'priority32768': 32768, 'priority24576': 24576, 'priority36864': 36864, 'priority20480': 20480, 'priority12288': 12288, 'priority8192': 8192, 'priority0': 0, 'priority57344': 57344, 'priority49152': 49152, 'priority45056': 45056, 'priority61440': 61440, 'priority53248': 53248, 'priority28672': 28672, 'priority16384': 16384.
spanningTreeHelloTime	1.3.6.1.4.1.8691.7.69.1.16.3.3	integer	read-write	The hello time of spanning tree protocol.
spanningTreeMaxAge	1.3.6.1.4.1.8691.7.69.1.16.3.4	integer	read-write	The max. age of spanning tree protocol.
spanningTreeForwardingDelay	1.3.6.1.4.1.8691.7.69.1.16.3.5	integer	read-write	Tje forwarding delay of spanning tree protocol.
spanningTreeTable	1.3.6.1.4.1.8691.7.69.1.16.3.6		no-access	The spanning tree table.
spanningTreeEntry	1.3.6.1.4.1.8691.7.69.1.16.3.6.1		no-access	The spanning tree port entry.
spanningTreeIndex	1.3.6.1.4.1.8691.7.69.1.16.3.6.1.1	integer	read-only	The index of spanning tree table.
enableSpanningTree	1.3.6.1.4.1.8691.7.69.1.16.3.6.1.2	integer	read-write	This enable of spanning tree protocol for this port. Enumeration: 'enable': 1, 'disable': 0.
spanningTreePortPriority	1.3.6.1.4.1.8691.7.69.1.16.3.6.1.3	integer	read-write	The port priority of spanning tree protocol. Enumeration: 'priority144': 144, 'priority224': 224, 'priority64': 64, 'priority48': 48, 'priority32': 32, 'priority80': 80, 'priority112': 112, 'priority160': 160, 'priority96': 96, 'priority0': 0, 'priority208': 208, 'priority240': 240, 'priority16': 16, 'priority128': 128, 'priority192': 192, 'priority176': 176.
spanningTreePortCost	1.3.6.1.4.1.8691.7.69.1.16.3.6.1.4	integer	read-write	The port cost of spanning tree protocol.
spanningTreePortStatus	1.3.6.1.4.1.8691.7.69.1.16.3.6.1.5	integer	read-only	The port status of spanning tree protocol. Enumeration: 'portDisabled': 0, 'notSpanningTreePort': 1, 'linkDown': 2, 'learning': 4, 'forwarding': 5, 'blocked': 3.
spanningTreePortEdge	1.3.6.1.4.1.8691.7.69.1.16.3.6.1.6	integer	read-write	This configures the Edge Port property for this port. Enumeration: 'auto': 0, 'false': 2, 'true': 1.
activeProtocolOfRedundancy	1.3.6.1.4.1.8691.7.69.1.16.4	integer	read-only	This shows the active redundancy protocol of this switch now. The none(0) stauts will be showed if only if the switch's redundancy protocol is set to spanning tree and none of ports enable spanning tree. Enumeration: 'none': 0, 'turboRingV2': 3, 'turboRing': 2, 'mstp': 5, 'spanningTree': 1, 'turboChain': 4.
turboRingV2	1.3.6.1.4.1.8691.7.69.1.16.5
turboRingV2Ring1	1.3.6.1.4.1.8691.7.69.1.16.5.1
ringIndexRing1	1.3.6.1.4.1.8691.7.69.1.16.5.1.1	integer	read-only	The turboRingV2 Ring Index.
ringEnableRing1	1.3.6.1.4.1.8691.7.69.1.16.5.1.2	integer	read-write	The turboRingV2 Ring1 Enalbe Config. Enumeration: 'enable': 1, 'disable': 0.
masterSetupRing1	1.3.6.1.4.1.8691.7.69.1.16.5.1.3	integer	read-write	Is this a Master or Slave. Enumeration: 'yes': 1, 'no': 0.
masterStatusRing1	1.3.6.1.4.1.8691.7.69.1.16.5.1.4	integer	read-only	Set this to be Master. Enumeration: 'yes': 1, 'no': 0.
designatedMasterRing1	1.3.6.1.4.1.8691.7.69.1.16.5.1.5	macaddress	read-only	The MAC address of the bridge which is the Master of the turboRingV2.
rdnt1stPortRing1	1.3.6.1.4.1.8691.7.69.1.16.5.1.6	integer	read-write	The port number of 1st Redundant Port on the turboRingV2.
rdnt1stPortStatusRing1	1.3.6.1.4.1.8691.7.69.1.16.5.1.7	integer	read-only	The status of 1st Redundant Port on the turboRingV2. Enumeration: 'linkdown': 2, 'disabled': 0, 'learning': 4, 'forwarding': 5, 'blocking': 3, 'notRedundant': 1.
rdnt2ndPortRing1	1.3.6.1.4.1.8691.7.69.1.16.5.1.8	integer	read-write	The port number of 2nd Redundant Port on the turboRingV2.
rdnt2ndPortStatusRing1	1.3.6.1.4.1.8691.7.69.1.16.5.1.9	integer	read-only	The status of 2nd Redundant Port on the turboRingV2. Enumeration: 'linkdown': 2, 'disabled': 0, 'learning': 4, 'forwarding': 5, 'blocking': 3, 'notRedundant': 1.
brokenStatusRing1	1.3.6.1.4.1.8691.7.69.1.16.5.1.10	integer	read-only	turboRingV2 broken display. Enumeration: 'na': 0, 'broken': 2, 'normal': 1.
turboRingV2Ring2	1.3.6.1.4.1.8691.7.69.1.16.5.2
ringIndexRing2	1.3.6.1.4.1.8691.7.69.1.16.5.2.1	integer	read-only	The turboRingV2 Ring Index.
ringEnableRing2	1.3.6.1.4.1.8691.7.69.1.16.5.2.2	integer	read-write	The turboRingV2 Ring2 Enalbe Config. Enumeration: 'enable': 1, 'disable': 0.
masterSetupRing2	1.3.6.1.4.1.8691.7.69.1.16.5.2.3	integer	read-write	Is this a Master or Slave. Enumeration: 'yes': 1, 'no': 0.
masterStatusRing2	1.3.6.1.4.1.8691.7.69.1.16.5.2.4	integer	read-only	Set this to be Master. Enumeration: 'yes': 1, 'no': 0.
designatedMasterRing2	1.3.6.1.4.1.8691.7.69.1.16.5.2.5	macaddress	read-only	The MAC address of the bridge which is the Master of the turboRingV2.
rdnt1stPortRing2	1.3.6.1.4.1.8691.7.69.1.16.5.2.6	integer	read-write	The port number of 1st Redundant Port on the turboRingV2.
rdnt1stPortStatusRing2	1.3.6.1.4.1.8691.7.69.1.16.5.2.7	integer	read-only	The status of 1st Redundant Port on the turboRingV2. Enumeration: 'linkdown': 2, 'disabled': 0, 'learning': 4, 'forwarding': 5, 'blocking': 3, 'notRedundant': 1.
rdnt2ndPortRing2	1.3.6.1.4.1.8691.7.69.1.16.5.2.8	integer	read-write	The port number of 2nd Redundant Port on the turboRingV2.
rdnt2ndPortStatusRing2	1.3.6.1.4.1.8691.7.69.1.16.5.2.9	integer	read-only	The status of 2nd Redundant Port on the turboRingV2. Enumeration: 'linkdown': 2, 'disabled': 0, 'learning': 4, 'forwarding': 5, 'blocking': 3, 'notRedundant': 1.
brokenStatusRing2	1.3.6.1.4.1.8691.7.69.1.16.5.2.10	integer	read-only	turboRingV2 broken display. Enumeration: 'na': 0, 'broken': 2, 'normal': 1.
turboRingV2Coupling	1.3.6.1.4.1.8691.7.69.1.16.5.3
couplingEnable	1.3.6.1.4.1.8691.7.69.1.16.5.3.1	integer	read-write	Setting the ring coupling enable. Enumeration: 'enable': 1, 'disable': 0.
couplingMode	1.3.6.1.4.1.8691.7.69.1.16.5.3.2	integer	read-write	Setting the ring coupling mode. Enumeration: 'couplingBackup': 2, 'couplingPrimary': 3, 'dualHoming': 1.
coupling1stPort	1.3.6.1.4.1.8691.7.69.1.16.5.3.3	integer	read-write	If in 'DUAL HOMING' mode,port name is 'Primary port',If in 'COUPLING' mode,port name is 'Coupling port'
coupling1stPortStatus	1.3.6.1.4.1.8691.7.69.1.16.5.3.4	integer	read-only	The 1st coupling port status of coupling function. Enumeration: 'linkdown': 2, 'disabled': 0, 'learning': 4, 'forwarding': 5, 'blocking': 3, 'notRedundant': 1.
coupling2ndPort	1.3.6.1.4.1.8691.7.69.1.16.5.3.5	integer	read-write	If in 'DUAL HOMING' mode,port name is 'Backup port',If in 'COUPLING' mode,port name is no used.
coupling2ndPortStatus	1.3.6.1.4.1.8691.7.69.1.16.5.3.6	integer	read-only	The 2nd coupling port status of coupling function. Enumeration: 'linkdown': 2, 'disabled': 0, 'learning': 4, 'forwarding': 5, 'blocking': 3, 'notRedundant': 1.
turboChain	1.3.6.1.4.1.8691.7.69.1.16.6
turboChainRole	1.3.6.1.4.1.8691.7.69.1.16.6.1	integer	read-write	The Role of TURBO CHAIN. Enumeration: 'member': 2, 'head': 1, 'tail': 3.
turboChainPort1	1.3.6.1.4.1.8691.7.69.1.16.6.2	integer	read-write	The port number of 1st Redundant Port on the TURBO CHAIN. If switch role is Turbo Chain Head, this is Head port, If Switch role is Turbo Chain Tail, this is Tail port.
turboChainPort2	1.3.6.1.4.1.8691.7.69.1.16.6.3	integer	read-write	The port number of 2nd Redundant Port on the TURBO CHAIN. It is the member port of TurboChain
turboChainPort1Status	1.3.6.1.4.1.8691.7.69.1.16.6.4	integer	read-only	Turbo Chain Port Status. Enumeration: 'na': 5, 'linkDown': 1, 'notTurboChainPort': 0, 'forwarding': 4, 'blocking': 2, 'blocked': 3.
turboChainPort2Status	1.3.6.1.4.1.8691.7.69.1.16.6.5	integer	read-only	Turbo Chain Port Status. Enumeration: 'na': 5, 'linkDown': 1, 'notTurboChainPort': 0, 'forwarding': 4, 'blocking': 2, 'blocked': 3.
turboChainPort1PartnerBridge	1.3.6.1.4.1.8691.7.69.1.16.6.6	macaddress	read-only	The MAC address of the next bridge
turboChainPort2PartnerBridge	1.3.6.1.4.1.8691.7.69.1.16.6.7	macaddress	read-only	The MAC address of the neighbor Turbo Chain switch
relayWarning	1.3.6.1.4.1.8691.7.69.1.17
relayWarningTable	1.3.6.1.4.1.8691.7.69.1.17.11		no-access	The relay warning table.
relayWarningEntry	1.3.6.1.4.1.8691.7.69.1.17.11.1		no-access	Relay Warning Entry.
relayAlarmIndex	1.3.6.1.4.1.8691.7.69.1.17.11.1.1	integer	read-only	The Relay alarm index.
relayWarningRelayContact	1.3.6.1.4.1.8691.7.69.1.17.11.1.2	integer	read-only	The first Relay contact status. Enumeration: 'opened': 1, 'closed': 0.
overrideRelayWarningSetting	1.3.6.1.4.1.8691.7.69.1.17.11.1.3	integer	read-write	Override the relay warning setting. Enumeration: 'yes': 1, 'no': 0.
relayWarningPower1Off	1.3.6.1.4.1.8691.7.69.1.17.11.1.4	integer	read-write	The relay contact will be opened while the first power input off. Enumeration: 'enable': 1, 'disable': 0.
relayWarningPower1OffStatus	1.3.6.1.4.1.8691.7.69.1.17.11.1.5	integer	read-only	The relay contact is opened as the first power input off.. Enumeration: 'triggered': 1, 'not-triggered': 0.
relayWarningPower2Off	1.3.6.1.4.1.8691.7.69.1.17.11.1.6	integer	read-write	The relay contact will be opened while the second power input off. Enumeration: 'enable': 1, 'disable': 0.
relayWarningPower2OffStatus	1.3.6.1.4.1.8691.7.69.1.17.11.1.7	integer	read-only	The relay contact is opened as the second power input off. Enumeration: 'triggered': 1, 'not-triggered': 0.
relayWarningTurboRingBreak	1.3.6.1.4.1.8691.7.69.1.17.11.1.8	integer	read-write	The relay contact will be opened while turbo ring break. Enumeration: 'enable': 1, 'disable': 0.
relayWarningTurboRingBreakStatus	1.3.6.1.4.1.8691.7.69.1.17.11.1.9	integer	read-only	The relay contact is opened while turbo ring is broken. Enumeration: 'triggered': 1, 'not-triggered': 0.
portRelayWarningTable	1.3.6.1.4.1.8691.7.69.1.17.12		no-access	The relay warning port table.
portRelayWarningEntry	1.3.6.1.4.1.8691.7.69.1.17.12.1		no-access	Port Relay Warning Entry.
relayWarningLinkChanged	1.3.6.1.4.1.8691.7.69.1.17.12.1.1	integer	read-write	The relay contact will be opened while this port's link status is changed. Enumeration: 'ignore': 0, 'on2off': 1, 'off2on': 2.
relayWarningLinkChangedStatus	1.3.6.1.4.1.8691.7.69.1.17.12.1.2	integer	read-only	The relay contact is opened as this port's link status is changed. Enumeration: 'triggered': 1, 'not-triggered': 0.
relayWarningTrafficOverload	1.3.6.1.4.1.8691.7.69.1.17.12.1.3	integer	read-write	The relay contact will be opened while this port's traffic is overload. Enumeration: 'enable': 1, 'disable': 0.
relayWarningTrafficOverloadStatus	1.3.6.1.4.1.8691.7.69.1.17.12.1.4	integer	read-only	The relay contact is opened as this port's traffic is overload. Enumeration: 'triggered': 1, 'not-triggered': 0.
relayWarningRxTrafficThreshold	1.3.6.1.4.1.8691.7.69.1.17.12.1.5	integer	read-write	The threshold of the port traffic will be over loading.
relayWarningTrafficDuration	1.3.6.1.4.1.8691.7.69.1.17.12.1.6	integer	read-write	The duration of the port traffic will be over loading.
diRelayWarningTable	1.3.6.1.4.1.8691.7.69.1.17.13		no-access	The relay warning DI table.
diRelayWarningEntry	1.3.6.1.4.1.8691.7.69.1.17.13.1		no-access	DI Relay Warning Entry.
relayWarningDiInputChanged	1.3.6.1.4.1.8691.7.69.1.17.13.1.1	integer	read-write	The relay contact will be opened while the DI input changed. Enumeration: 'on': 2, 'disable': 0, 'off': 1.
relayWarningDiInputChangedStatus	1.3.6.1.4.1.8691.7.69.1.17.13.1.2	integer	read-only	The relay contact is opened as the first DI input changed.. Enumeration: 'triggered': 1, 'not-triggered': 0.
trafficPrioritization	1.3.6.1.4.1.8691.7.69.1.18
qosClassification	1.3.6.1.4.1.8691.7.69.1.18.1
schedulingMechanism	1.3.6.1.4.1.8691.7.69.1.18.1.1	integer	read-write	The scheduling mechanism. Enumeration: 'schedweightfair': 0, 'schedstrict': 1.
qosPortTable	1.3.6.1.4.1.8691.7.69.1.18.1.2		no-access	The QoS port table.
qosPortEntry	1.3.6.1.4.1.8691.7.69.1.18.1.2.1		no-access	The QoS Port Entry.
dscpInspection	1.3.6.1.4.1.8691.7.69.1.18.1.2.1.1	integer	read-write	This enable the inspection of dscp field. Enumeration: 'yes': 1, 'no': 0.
cosInspection	1.3.6.1.4.1.8691.7.69.1.18.1.2.1.2	integer	read-write	This enable the inspection of CoS field. Enumeration: 'yes': 1, 'no': 0.
portPriority	1.3.6.1.4.1.8691.7.69.1.18.1.2.1.3	integer	read-write	The deault priority of the port. Enumeration: 'priority1': 1, 'priority0': 0, 'priority3': 3, 'priority2': 2, 'priority5': 5, 'priority4': 4, 'priority7': 7, 'priority6': 6.
priorityMapping	1.3.6.1.4.1.8691.7.69.1.18.2
priorityMappingTable	1.3.6.1.4.1.8691.7.69.1.18.2.1		no-access	The priority mapping table.
priorityMappingEntry	1.3.6.1.4.1.8691.7.69.1.18.2.1.1		no-access	The Priority mapping Entry.
priorityTag	1.3.6.1.4.1.8691.7.69.1.18.2.1.1.1	integer	read-only	The priority tag of QOS field.
priorityMappedQueue	1.3.6.1.4.1.8691.7.69.1.18.2.1.1.2	integer	read-write	The egress queue corresponding to it's priority value. Enumeration: 'trafficclass2': 2, 'trafficclass3': 3, 'trafficclass0': 0, 'trafficclass1': 1.
dscpMapping	1.3.6.1.4.1.8691.7.69.1.18.3
dscpMappingTable	1.3.6.1.4.1.8691.7.69.1.18.3.1		no-access	The DSCP mapping table.
dscpMappingEntry	1.3.6.1.4.1.8691.7.69.1.18.3.1.1		no-access	DSCP mapping Entry.
dscpClass	1.3.6.1.4.1.8691.7.69.1.18.3.1.1.1	integer	read-only	The DSCP class of TOS field.
dscpMappedPriority	1.3.6.1.4.1.8691.7.69.1.18.3.1.1.2	integer	read-write	The frame's priority corresponding to it's DSCP class value. Enumeration: 'priority1': 1, 'priority0': 0, 'priority3': 3, 'priority2': 2, 'priority5': 5, 'priority4': 4, 'priority7': 7, 'priority6': 6.
vlan	1.3.6.1.4.1.8691.7.69.1.19
vlanPortSettingTable	1.3.6.1.4.1.8691.7.69.1.19.1		no-access	The vlan seting table of ports.
vlanPortSettingEntry	1.3.6.1.4.1.8691.7.69.1.19.1.1		no-access	Port Setting Entry of VLAN.
portVlanType	1.3.6.1.4.1.8691.7.69.1.19.1.1.1	integer	read-write	The vlan type of port. Enumeration: 'access': 0, 'hybrid': 2, 'trunk': 1.
portDefaultVid	1.3.6.1.4.1.8691.7.69.1.19.1.1.2	integer	read-write	The PVID of port.
portFixedVid	1.3.6.1.4.1.8691.7.69.1.19.1.1.3	displaystring	read-write	The fixed vids of (trunk) port.
portForbiddenVid	1.3.6.1.4.1.8691.7.69.1.19.1.1.4	displaystring	read-write	The forbidden vids of (trunk)port.
portFixedVidUntag	1.3.6.1.4.1.8691.7.69.1.19.1.1.5	displaystring	read-write	The fixed untag vids of (trunk) port.
vlanTable	1.3.6.1.4.1.8691.7.69.1.19.2		no-access	The VLAN table.
vlanEntry	1.3.6.1.4.1.8691.7.69.1.19.2.1		no-access	VLAN Entry.
vlanId	1.3.6.1.4.1.8691.7.69.1.19.2.1.1	integer	read-only	The VLAN id.
joinedAccessPorts	1.3.6.1.4.1.8691.7.69.1.19.2.1.2	portlist	read-only	The access ports that joined this VID.
joinedTrunkPorts	1.3.6.1.4.1.8691.7.69.1.19.2.1.3	portlist	read-only	The trunk ports that joined this VID.
joinedHybridPorts	1.3.6.1.4.1.8691.7.69.1.19.2.1.4	portlist	read-only	The hybrid ports that joined this VID.
vlanName	1.3.6.1.4.1.8691.7.69.1.19.2.1.5	displaystring	read-write	The VLAN name.
managementVlanId	1.3.6.1.4.1.8691.7.69.1.19.3	integer	read-write	The management VLAN id.
vlanType	1.3.6.1.4.1.8691.7.69.1.19.4	integer	read-write	VLAN Type. Enumeration: 'tagBased': 0, 'portBased': 1.
portbaseVlanSettingTable	1.3.6.1.4.1.8691.7.69.1.19.5		no-access	Port base Vlan Setting Table.
portbaseVlanSettingEntry	1.3.6.1.4.1.8691.7.69.1.19.5.1		no-access	Port base Vlan Setting Entry.
portbaseVlanSettingIndex	1.3.6.1.4.1.8691.7.69.1.19.5.1.1	integer	read-only	port base Vlan Group Index.
portbaseVlanMemberPorts	1.3.6.1.4.1.8691.7.69.1.19.5.1.2	portlist	read-write	port base Vlan Group Member Ports.
enableGvrp	1.3.6.1.4.1.8691.7.69.1.19.6	integer	read-write	Enable GVRP. Enumeration: 'enable': 1, 'disable': 0.
multicastFiltering	1.3.6.1.4.1.8691.7.69.1.20
igmpSnooping	1.3.6.1.4.1.8691.7.69.1.20.1
querierQueryInterval	1.3.6.1.4.1.8691.7.69.1.20.1.1	integer	read-write	This query interval of the querier function for this VLAN.
igmpSnoopingSettingTable	1.3.6.1.4.1.8691.7.69.1.20.1.2		no-access	The IGMP snooping setting table.
igmpSnoopingSettingEntry	1.3.6.1.4.1.8691.7.69.1.20.1.2.1		no-access	The IGMP snooping setting Entry.
enableIgmpSnooping	1.3.6.1.4.1.8691.7.69.1.20.1.2.1.1	integer	read-write	This enable the IGMP snooping functon in this VLAN. Enumeration: 'enable': 1, 'disable': 0.
enableQuerier	1.3.6.1.4.1.8691.7.69.1.20.1.2.1.2	integer	read-write	This enable the querier function for this VLAN. Enumeration: 'igmpv3': 2, 'igmpv2': 1, 'disable': 0.
fixedMulticastQuerierPorts	1.3.6.1.4.1.8691.7.69.1.20.1.2.1.3	portlist	read-write	The ports that multicast-Querier exist.
learnedMulticastQuerierPorts	1.3.6.1.4.1.8691.7.69.1.20.1.2.1.4	portlist	read-only	The ports that multicast-Querier exist.
enableGlobalIgmpSnooping	1.3.6.1.4.1.8691.7.69.1.20.1.4	integer	read-write	This enable the IGMP snooping functon . Enumeration: 'enable': 1, 'disable': 0.
multicastFastForwarding	1.3.6.1.4.1.8691.7.69.1.20.1.7	integer	read-write	This Enable Multicast Fast Forwarding Mode functon . Enumeration: 'enable': 1, 'disable': 0.
staticMulticast	1.3.6.1.4.1.8691.7.69.1.20.2
staticMulticastTable	1.3.6.1.4.1.8691.7.69.1.20.2.1		no-access	The static multicast table.
staticMulticastEntry	1.3.6.1.4.1.8691.7.69.1.20.2.1.1		no-access	Static multicast Entry.
staticMulticastAddress	1.3.6.1.4.1.8691.7.69.1.20.2.1.1.1	macaddress	read-only	The static multicast address.
staticMulticastPorts	1.3.6.1.4.1.8691.7.69.1.20.2.1.1.2	portlist	read-only	The port map of the static multicast address.
staticMulticastStatus	1.3.6.1.4.1.8691.7.69.1.20.2.1.1.3	integer	read-only	The status is active to indicate normal. Use createAndGo to create new on multiple SET. Use createAndWait to create new on one SET all then actvie. Use destroy to delete this row. Enumeration: 'active': 1, 'destroy': 6, 'createAndGo': 4, 'createAndWait': 5.
gmrp	1.3.6.1.4.1.8691.7.69.1.20.3
gmrpSettingTable	1.3.6.1.4.1.8691.7.69.1.20.3.1		no-access	The GMRP setting table.
gmrpSettingEntry	1.3.6.1.4.1.8691.7.69.1.20.3.1.1		no-access	The GMRP Setting Entry.
enableGMRP	1.3.6.1.4.1.8691.7.69.1.20.3.1.1.1	integer	read-write	Enable/Disable GMRP. Enumeration: 'enable': 1, 'disable': 0.
gmrpTable	1.3.6.1.4.1.8691.7.69.1.20.3.2		no-access	The GMRP status table.
gmrpEntry	1.3.6.1.4.1.8691.7.69.1.20.3.2.1		no-access	The GMRP Status Entry.
gmrpMulticastGroup	1.3.6.1.4.1.8691.7.69.1.20.3.2.1.1	macaddress	read-only	GMRP multicast group.
gmrpFixedPorts	1.3.6.1.4.1.8691.7.69.1.20.3.2.1.2	portlist	read-only	The ports that joined GMRP multicast group manually.
gmrpLearnedPorts	1.3.6.1.4.1.8691.7.69.1.20.3.2.1.3	portlist	read-only	The ports that joined GMRP multicast group by GMRP learning.
rateLimiting	1.3.6.1.4.1.8691.7.69.1.21
droppacketModeRateLimitingIngressTable	1.3.6.1.4.1.8691.7.69.1.21.1		no-access	The rate limiting table.
droppacketModeRateLimitingIngressEntry	1.3.6.1.4.1.8691.7.69.1.21.1.1		no-access	Rate limiting Entry.
ingressLimitRate	1.3.6.1.4.1.8691.7.69.1.21.1.1.1	integer	read-write	The ingress limit mode. Enumeration: 'percentage85': 9, 'percentage65': 8, 'percentage03': 1, 'percentage35': 6, 'notlimited': 0, 'percentage50': 7, 'percentage05': 2, 'percentage15': 4, 'percentage25': 5, 'percentage10': 3.
broadcastStormProtection	1.3.6.1.4.1.8691.7.69.1.21.2
bcastStormProtection	1.3.6.1.4.1.8691.7.69.1.21.2.1	integer	read-write	Broadcast Storm Protection Enumeration: 'enable': 1, 'disable': 0.
bcastStormProtectionIncludeMcast	1.3.6.1.4.1.8691.7.69.1.21.2.2	integer	read-write	Broadcast Storm Protection includes Multicast packets Enumeration: 'yes': 1, 'no': 0.
bcastStormProtectionIncludeUcast	1.3.6.1.4.1.8691.7.69.1.21.2.3	integer	read-write	Broadcast Storm Protection includes Unicast packets Enumeration: 'yes': 1, 'no': 0.
portDisableMode	1.3.6.1.4.1.8691.7.69.1.21.3
portDisableModePeriod	1.3.6.1.4.1.8691.7.69.1.21.3.1	integer	read-write	Check time.
portDisableModeTable	1.3.6.1.4.1.8691.7.69.1.21.3.2		no-access	The rate limiting table.
portDisableModeEntry	1.3.6.1.4.1.8691.7.69.1.21.3.2.1		no-access	Rate limiting Entry.
ingressLimit	1.3.6.1.4.1.8691.7.69.1.21.3.2.1.1	integer	read-write	The ingress limit mode. Enumeration: 'rateMega4Fps22322': 4, 'rateMega1Fps4464': 1, 'rateGiga6Fps520840': 13, 'rateMega7Fps74405': 7, 'rateGiga3Fps148810': 10, 'rateGiga2Fps74410': 9, 'rateGiga7Fps744050': 14, 'notlimited': 0, 'rateGiga5Fps372030': 12, 'rateMega3Fps14881': 3, 'rateMega2Fps7441': 2, 'rateMega5Fps37203': 5, 'rateGiga1Fps44640': 8, 'rateGiga4Fps223220': 11, 'rateMega6Fps52084': 6.
rateLimitingAction	1.3.6.1.4.1.8691.7.69.1.21.4	integer	read-write	The rate limiting mode. Enumeration: 'droppacket': 0, 'portDisable': 1.
security	1.3.6.1.4.1.8691.7.69.1.22
userLoginSetting	1.3.6.1.4.1.8691.7.69.1.22.1
userLoginServer	1.3.6.1.4.1.8691.7.69.1.22.1.1	integer	read-write	Set user login server option. Enumeration: 'tacacs': 3, 'radius': 4, 'tacacsLocal': 1, 'radiusLocal': 2, 'local': 5.
tacacsServerSetting	1.3.6.1.4.1.8691.7.69.1.22.1.2
tacacsLoginAuthServer	1.3.6.1.4.1.8691.7.69.1.22.1.2.1	displaystring	read-write	Set Tacacs+ Server IP Address/Domain name.
tacacsLoginAuthPort	1.3.6.1.4.1.8691.7.69.1.22.1.2.2	integer	read-write	Set Tacacs+ Port.
tacacsLoginAuthSharedKey	1.3.6.1.4.1.8691.7.69.1.22.1.2.3	displaystring	read-write	Set Tacacs+ Shared Key.
tacacsLoginAuthAuthType	1.3.6.1.4.1.8691.7.69.1.22.1.2.4	integer	read-write	Set Tacacs+ Shared Key. Enumeration: 'pap': 1, 'mschap': 4, 'chap': 2, 'ascii': 0.
tacacsLoginAuthTimeout	1.3.6.1.4.1.8691.7.69.1.22.1.2.5	integer	read-write	Set Tacacs+ Shared Key.
radiusServerSetting	1.3.6.1.4.1.8691.7.69.1.22.1.3
radiusLoginAuthServer	1.3.6.1.4.1.8691.7.69.1.22.1.3.1	displaystring	read-write	Set Radius Server IP Address/Domain name.
radiusLoginAuthPort	1.3.6.1.4.1.8691.7.69.1.22.1.3.2	integer	read-write	Set Radius Port.
radiusLoginAuthSharedKey	1.3.6.1.4.1.8691.7.69.1.22.1.3.3	displaystring	read-write	Set Radius Shared Key.
radiusLoginAuthAuthType	1.3.6.1.4.1.8691.7.69.1.22.1.3.4	integer	read-write	Set Radius Shared Key. Enumeration: 'pap': 0, 'chap': 1.
radiusLoginAuthTimeout	1.3.6.1.4.1.8691.7.69.1.22.1.3.5	integer	read-write	Set Radius Shared Key.
portAccessControl	1.3.6.1.4.1.8691.7.69.1.22.2
staticPortLockLegacy	1.3.6.1.4.1.8691.7.69.1.22.2.1
staticPortLockLegacyAddress	1.3.6.1.4.1.8691.7.69.1.22.2.1.1	macaddress	read-only	The static port lock address.
staticPortLockLegacyPort	1.3.6.1.4.1.8691.7.69.1.22.2.1.2	integer	read-only	The port of the static port lock address.
staticPortLockLegacyStatus	1.3.6.1.4.1.8691.7.69.1.22.2.1.3	integer	read-only	The status is active to indicate normal. Use createAndGo to create new on multiple SET. Enumeration: 'active': 1, 'createAndGo': 4.
dot1x	1.3.6.1.4.1.8691.7.69.1.22.2.2
dataBaseOption	1.3.6.1.4.1.8691.7.69.1.22.2.2.1	integer	read-write	Set IEEE 802.1X database option. Enumeration: 'radius': 2, 'radiuslocal': 3, 'local': 1.
dot1xReauthEnable	1.3.6.1.4.1.8691.7.69.1.22.2.2.5	integer	read-write	Enable/Disable IEEE 802.1X Re-authentication. Enumeration: 'enable': 1, 'disable': 0.
dot1xReauthPeriod	1.3.6.1.4.1.8691.7.69.1.22.2.2.6	integer	read-write	Set IEEE 802.1X Re-authentication Period.
dot1xSettingTable	1.3.6.1.4.1.8691.7.69.1.22.2.2.7		no-access	IEEE 802.1X Port Setting Table.
dot1xSettingEntry	1.3.6.1.4.1.8691.7.69.1.22.2.2.7.1		no-access	IEEE 802.1X Port Setting Entry.
enableDot1X	1.3.6.1.4.1.8691.7.69.1.22.2.2.7.1.1	integer	read-write	Enable/Disable IEEE 802.1X. Enumeration: 'enable': 1, 'disable': 0.
dot1xReauthTable	1.3.6.1.4.1.8691.7.69.1.22.2.2.8		no-access	IEEE 802.1X Re-authentication Table.
dot1xReauthEntry	1.3.6.1.4.1.8691.7.69.1.22.2.2.8.1		no-access	IEEE 802.1X Re-authentication Entry.
dot1xReauthPortIndex	1.3.6.1.4.1.8691.7.69.1.22.2.2.8.1.1	integer	read-only	IEEE 802.1X Enabled Port Index.
dot1xReauth	1.3.6.1.4.1.8691.7.69.1.22.2.2.8.1.2	integer	read-write	Reauth IEEE 802.1X. Enumeration: 'yes': 1, 'no': 0.
dot1xRadius	1.3.6.1.4.1.8691.7.69.1.22.2.2.9
dot1xSameAsAuthServer	1.3.6.1.4.1.8691.7.69.1.22.2.2.9.1	integer	read-write	Set Radius Server IP Address/Domain name. Enumeration: 'notSame': 0, 'same': 1.
dot1x1stRadiusServer	1.3.6.1.4.1.8691.7.69.1.22.2.2.9.2	displaystring	read-write	Set Radius Server IP Address/Domain name.
dot1x1stRadiusPort	1.3.6.1.4.1.8691.7.69.1.22.2.2.9.3	integer	read-write	Set Radius Port.
dot1x1stRadiusSharedKey	1.3.6.1.4.1.8691.7.69.1.22.2.2.9.4	displaystring	read-write	Set Radius Shared Key.
dot1x2ndRadiusServer	1.3.6.1.4.1.8691.7.69.1.22.2.2.9.5	displaystring	read-write	Set Radius Server IP Address/Domain name.
dot1x2ndRadiusPort	1.3.6.1.4.1.8691.7.69.1.22.2.2.9.6	integer	read-write	Set Radius Port.
dot1x2ndRadiusSharedKey	1.3.6.1.4.1.8691.7.69.1.22.2.2.9.7	displaystring	read-write	Set Radius Shared Key.
portAccessControlTable	1.3.6.1.4.1.8691.7.69.1.22.2.3		no-access	The Port Access Control table.
portAccessControlEntry	1.3.6.1.4.1.8691.7.69.1.22.2.3.1		no-access	The Port Access Control table entry.
portAccessControlAddress	1.3.6.1.4.1.8691.7.69.1.22.2.3.1.1	macaddress	read-only	The MAC address which is static locked or IEEE 802.1X authorized.
portAccessControlPortNo	1.3.6.1.4.1.8691.7.69.1.22.2.3.1.2	integer	read-only	The port number that the Port Access Control address resides.
portAccessControlAccessStatus	1.3.6.1.4.1.8691.7.69.1.22.2.3.1.3	integer	read-only	The access status of the Port Access Control address. Enumeration: 'macAddrSticky': 5, 'staticLock': 1, 'authorized': 2, 'unAuthorized': 3, 'authorizing': 4.
portAccessControlStatus	1.3.6.1.4.1.8691.7.69.1.22.2.3.1.4	integer	read-only	The status is active to indicate normal. Use createAndGo to create new on multiple SET. Use createAndWait to create new on one SET all then actvie. Use destroy to delete this row. Enumeration: 'active': 1, 'destroy': 6, 'createAndGo': 4, 'createAndWait': 5.
portAccessControlVid	1.3.6.1.4.1.8691.7.69.1.22.2.3.1.5	integer	read-only	The vid number that the Port Access Control address resides.
portSecurity	1.3.6.1.4.1.8691.7.69.1.22.2.4
portSecurityModeTable	1.3.6.1.4.1.8691.7.69.1.22.2.4.1		no-access	Port security mode
portSecurityModeEntry	1.3.6.1.4.1.8691.7.69.1.22.2.4.1.1		no-access	Port security mode entry.
portSecurityModePort	1.3.6.1.4.1.8691.7.69.1.22.2.4.1.1.1	integer	read-only	Set port security mode to specific port.
portSecurityModeSelect	1.3.6.1.4.1.8691.7.69.1.22.2.4.1.1.2	integer	read-only	Select the port security mode of the port. Enumeration: 'normal-mode': 0, 'static-portlock': 1, 'mac-address-sticky': 2.
portSecurityModeLimit	1.3.6.1.4.1.8691.7.69.1.22.2.4.1.1.3	integer	read-only	If port security mode is MAC address sticky, set the limit of the port. If port security mode is not MAC address sticky, set the limit to 0.
portSecurityModeViolationPortDisable	1.3.6.1.4.1.8691.7.69.1.22.2.4.1.1.4	integer	read-only	Enable the violation port disable. Enumeration: 'enable': 1, 'disable': 0.
portSecurityModeStatus	1.3.6.1.4.1.8691.7.69.1.22.2.4.1.1.5	integer	read-only	The status is active to indicate normal. Use createAndGo to create new on multiple SET. Enumeration: 'active': 1, 'createAndGo': 4.
staticPortLock	1.3.6.1.4.1.8691.7.69.1.22.2.4.2
staticPortLockAddress	1.3.6.1.4.1.8691.7.69.1.22.2.4.2.1	macaddress	read-only	The static port lock address.
staticPortLockPort	1.3.6.1.4.1.8691.7.69.1.22.2.4.2.2	integer	read-only	The port of the static port lock address.
staticPortLockStatus	1.3.6.1.4.1.8691.7.69.1.22.2.4.2.3	integer	read-only	The status is active to indicate normal. Use createAndGo to create new on multiple SET. Enumeration: 'active': 1, 'createAndGo': 4.
staticPortLockVid	1.3.6.1.4.1.8691.7.69.1.22.2.4.2.4	integer	read-only	Add vlan of the static port lock address. For SVL switch, vid should be 0
macAddressSticky	1.3.6.1.4.1.8691.7.69.1.22.2.4.3
macAddressStickyAddress	1.3.6.1.4.1.8691.7.69.1.22.2.4.3.1	macaddress	read-only	Manually add a MAC sticky address.
macAddressStickyPort	1.3.6.1.4.1.8691.7.69.1.22.2.4.3.2	integer	read-only	Add MAC sticky address to the specific port.
macAddressStickyVid	1.3.6.1.4.1.8691.7.69.1.22.2.4.3.3	integer	read-only	Add MAC sticky address to the specific vlan. For SVL switch, vid should be 0
macAddressStickyStatus	1.3.6.1.4.1.8691.7.69.1.22.2.4.3.4	integer	read-only	The status is active to indicate normal. Use createAndGo to create new on multiple SET. Enumeration: 'active': 1, 'createAndGo': 4.
mab	1.3.6.1.4.1.8691.7.69.1.22.2.5
mabDBOption	1.3.6.1.4.1.8691.7.69.1.22.2.5.1	integer	read-write	Set MAB database option. Enumeration: 'radius': 2.
mabReauthEnable	1.3.6.1.4.1.8691.7.69.1.22.2.5.2	integer	read-write	Enable/Disable MAB Re-authorizing. Enumeration: 'enable': 1, 'disable': 0.
mabReauthPeriod	1.3.6.1.4.1.8691.7.69.1.22.2.5.3	integer	read-write	Set MAB Re-authorizing Period.
mabRestartEnable	1.3.6.1.4.1.8691.7.69.1.22.2.5.4	integer	read-write	Enable/Disable MAB Re-start. Enumeration: 'enable': 1, 'disable': 0.
mabRestartPeriod	1.3.6.1.4.1.8691.7.69.1.22.2.5.5	integer	read-write	Set MAB Re-start Period.
mabSettingTable	1.3.6.1.4.1.8691.7.69.1.22.2.5.6		no-access	MAB Setting Table.
mabSettingEntry	1.3.6.1.4.1.8691.7.69.1.22.2.5.6.1		no-access	MAB Port Setting Entry.
enableMAB	1.3.6.1.4.1.8691.7.69.1.22.2.5.6.1.1	integer	read-write	Enable/Disable MAB. Enumeration: 'enable': 1, 'disable': 0.
accessibleIP	1.3.6.1.4.1.8691.7.69.1.30
enableAccessibleIP	1.3.6.1.4.1.8691.7.69.1.30.1	integer	read-write	Enable the accessible IP address list. Enumeration: 'enable': 1, 'disable': 0.
accessibleIpTable	1.3.6.1.4.1.8691.7.69.1.30.2		no-access	accessibleIP.
accessibleIpEntry	1.3.6.1.4.1.8691.7.69.1.30.2.1		no-access	Accessible IP address entry.
accessibleIpAddress	1.3.6.1.4.1.8691.7.69.1.30.2.1.1	ipaddress	read-only	Accessible IP address
accessibleIpNetMask	1.3.6.1.4.1.8691.7.69.1.30.2.1.2	ipaddress	read-only	Accessible IP netmask.
accessibleIpStatus	1.3.6.1.4.1.8691.7.69.1.30.2.1.3	integer	read-only	The status is active to indicate normal. Use createAndGo to create new on multiple SET. Use createAndWait to create new on one SET all then actvie. Use destroy to delete this row. Enumeration: 'active': 1, 'destroy': 6, 'createAndGo': 4, 'createAndWait': 5.
sysFileUpdate	1.3.6.1.4.1.8691.7.69.1.31
tftpServer	1.3.6.1.4.1.8691.7.69.1.31.1	displaystring	read-write	The TFTP Server name(IP Address)
firmwarePathName	1.3.6.1.4.1.8691.7.69.1.31.2	displaystring	read-write	The path name of firmware file in the TFTP Server
logPathName	1.3.6.1.4.1.8691.7.69.1.31.3	displaystring	read-write	The path name of log file in the TFTP Server
confPathName	1.3.6.1.4.1.8691.7.69.1.31.4	displaystring	read-write	The path name of configuration file in the TFTP Server
tftpUpdate	1.3.6.1.4.1.8691.7.69.1.31.5	integer	read-only	Enumeration: 'importConfig': 2, 'importFirmware': 1, 'exportConfig': 3, 'exportLog': 4.
timeSetting	1.3.6.1.4.1.8691.7.69.1.32
sysDateTime	1.3.6.1.4.1.8691.7.69.1.32.1	dateandtime	read-write	The date time of system
calibratePeriod	1.3.6.1.4.1.8691.7.69.1.32.2	integer	read-write	The period (seconds) that calibrate with time server
timeServer1	1.3.6.1.4.1.8691.7.69.1.32.3	displaystring	read-write	The first time server
timeServer2	1.3.6.1.4.1.8691.7.69.1.32.4	displaystring	read-write	The second time server
daylightSaving	1.3.6.1.4.1.8691.7.69.1.32.5
startMonth	1.3.6.1.4.1.8691.7.69.1.32.5.1	integer	read-write	Setting Start Month of Daylight Saving time Enumeration: 'mar': 3, 'feb': 2, 'aug': 8, 'sep': 9, 'apr': 4, 'na': 0, 'jun': 6, 'jul': 7, 'jan': 1, 'may': 5, 'nov': 11, 'dec': 12, 'oct': 10.
startWeek	1.3.6.1.4.1.8691.7.69.1.32.5.2	integer	read-write	Setting Start Week of Daylight Saving time Enumeration: 'na': 0, 'weeklast': 6, 'week1': 1, 'week3': 3, 'week2': 2, 'week4': 4.
startDay	1.3.6.1.4.1.8691.7.69.1.32.5.3	integer	read-write	Setting Start Day of Daylight Saving time Enumeration: 'wed': 4, 'na': 0, 'th': 5, 'mon': 2, 'sun': 1, 'fri': 6, 'tue': 3, 'sat': 7.
startHour	1.3.6.1.4.1.8691.7.69.1.32.5.4	integer	read-write	Setting Start Hour of Daylight Saving time
endMonth	1.3.6.1.4.1.8691.7.69.1.32.5.5	integer	read-write	Setting End Month of Daylight Saving time Enumeration: 'mar': 3, 'feb': 2, 'aug': 8, 'sep': 9, 'apr': 4, 'na': 0, 'jun': 6, 'jul': 7, 'jan': 1, 'may': 5, 'nov': 11, 'dec': 12, 'oct': 10.
endWeek	1.3.6.1.4.1.8691.7.69.1.32.5.6	integer	read-write	Setting End Week of Daylight Saving time Enumeration: 'na': 0, 'weeklast': 6, 'week1': 1, 'week3': 3, 'week2': 2, 'week4': 4.
endDay	1.3.6.1.4.1.8691.7.69.1.32.5.7	integer	read-write	Setting End Day of Daylight Saving time Enumeration: 'wed': 4, 'na': 0, 'th': 5, 'mon': 2, 'sun': 1, 'fri': 6, 'tue': 3, 'sat': 7.
endHour	1.3.6.1.4.1.8691.7.69.1.32.5.8	integer	read-write	Setting End Hour of Daylight Saving time
offsetHours	1.3.6.1.4.1.8691.7.69.1.32.5.9	integer	read-write	Setting Offset Hours of Daylight Saving time
enableNTPServer	1.3.6.1.4.1.8691.7.69.1.32.6	integer	read-write	This enable NTP Server. Enumeration: 'enable': 1, 'disable': 0.
clockSource	1.3.6.1.4.1.8691.7.69.1.32.7	integer	read-write	The clock source of system Enumeration: 'ntp': 2, 'local': 0, 'sntp': 1.
ntpAuthenticate	1.3.6.1.4.1.8691.7.69.1.32.8	integer	read-write	NTP authentication Enumeration: 'enable': 1, 'disable': 0.
ntpPeerTable	1.3.6.1.4.1.8691.7.69.1.32.9		no-access	NTP peer table
ntpPeerEntry	1.3.6.1.4.1.8691.7.69.1.32.9.1		no-access	NTP peer settings
ntpPeerIndex	1.3.6.1.4.1.8691.7.69.1.32.9.1.1	integer	read-only	NTP peer index
ntpPeerAddress	1.3.6.1.4.1.8691.7.69.1.32.9.1.2	displaystring	read-write	NTP peer address
ntpPeerAuthenticate	1.3.6.1.4.1.8691.7.69.1.32.9.1.3	integer	read-write	NTP authentication Enumeration: 'enable': 1, 'disable': 0.
ntpPeerAuthenticateKeyid	1.3.6.1.4.1.8691.7.69.1.32.9.1.4	integer	read-write	NTP authentication key Id
ntpAuthenticateKeyTable	1.3.6.1.4.1.8691.7.69.1.32.10		no-access	NTP authenticate key table
ntpAuthenticateKeyEntry	1.3.6.1.4.1.8691.7.69.1.32.10.1		no-access	NTP authenticate key settings
ntpAuthenticateKeyIndex	1.3.6.1.4.1.8691.7.69.1.32.10.1.1	integer	read-only	NTP authenticate key index
ntpAuthenticateKeyID	1.3.6.1.4.1.8691.7.69.1.32.10.1.2	integer	read-write	NTP authenticate key id
ntpAuthenticateKeyString	1.3.6.1.4.1.8691.7.69.1.32.10.1.3	displaystring	read-write	NTP authenticate key string
ntpAuthenticateKeyTrusted	1.3.6.1.4.1.8691.7.69.1.32.10.1.4	integer	read-write	NTP authenticate key trusted Enumeration: 'distrust': 0, 'trusted': 1.
dipSwitchSetting	1.3.6.1.4.1.8691.7.69.1.34
dipSwitchEnableTurboRing	1.3.6.1.4.1.8691.7.69.1.34.1	integer	read-write	Enable TurboRing Dip Switch functions Enumeration: 'enable': 1, 'disable': 0.
dipSwitchTurboRingPole	1.3.6.1.4.1.8691.7.69.1.34.2	integer	read-only	The TurboRing Pole status of Dip switch. Enumeration: 'on': 1, 'off': 0.
dipSwitchRingCouplingPole	1.3.6.1.4.1.8691.7.69.1.34.3	integer	read-only	The Ring Coupling Pole status of Dip switch. Enumeration: 'on': 1, 'off': 0.
dipSwitchRingMasterPole	1.3.6.1.4.1.8691.7.69.1.34.4	integer	read-only	The Ring Master Pole status of Dip switch. Enumeration: 'on': 1, 'off': 0.
backupMediaSetting	1.3.6.1.4.1.8691.7.69.1.35
abc02Status	1.3.6.1.4.1.8691.7.69.1.35.2	integer	read-only	Current status of ABC-02 Enumeration: 'detecting': 2, 'ready-and-removable': 4, 'working': 3, 'device-not-present': 0, 'unauthorized-media': 1.
abc02AutoImportConfig	1.3.6.1.4.1.8691.7.69.1.35.3	integer	read-write	Auto load configuration from ABC to system when boot up Enumeration: 'enable': 1, 'disable': 0.
abc02AutoExportConfig	1.3.6.1.4.1.8691.7.69.1.35.4	integer	read-write	Auto backup to ABC-02 when configuration change Enumeration: 'enable': 1, 'disable': 0.
abc02AutoExportLog	1.3.6.1.4.1.8691.7.69.1.35.5	integer	read-write	Auto backup of event log to prevent overwrite Enumeration: 'enable': 1, 'disable': 0.
enableWarmStart	1.3.6.1.4.1.8691.7.69.1.36	integer	read-write	Enable to restart MOXA ethernet switch. Enumeration: 'yes': 1, 'no': 0.
syslogSetting	1.3.6.1.4.1.8691.7.69.1.37
syslogServer1	1.3.6.1.4.1.8691.7.69.1.37.1	displaystring	read-write	The syslog server 1
syslogServer1port	1.3.6.1.4.1.8691.7.69.1.37.2	integer	read-write	The syslog server 1 port
syslogServer2	1.3.6.1.4.1.8691.7.69.1.37.3	displaystring	read-write	The syslog server 2
syslogServer2port	1.3.6.1.4.1.8691.7.69.1.37.4	integer	read-write	The syslog server 2 port
syslogServer3	1.3.6.1.4.1.8691.7.69.1.37.5	displaystring	read-write	The syslog server 3
syslogServer3port	1.3.6.1.4.1.8691.7.69.1.37.6	integer	read-write	The syslog server 3 port
dhcpRelayAgentSetting	1.3.6.1.4.1.8691.7.69.1.39
dhcpServer1	1.3.6.1.4.1.8691.7.69.1.39.1	displaystring	read-write	The dhcp Relay Agent Server 1.
dhcpServer2	1.3.6.1.4.1.8691.7.69.1.39.2	displaystring	read-write	The dhcp Relay Agent Server 2.
dhcpServer3	1.3.6.1.4.1.8691.7.69.1.39.3	displaystring	read-write	The dhcp Relay Agent Server 3.
dhcpServer4	1.3.6.1.4.1.8691.7.69.1.39.4	displaystring	read-write	The dhcp Relay Agent Server 4.
option82Setting	1.3.6.1.4.1.8691.7.69.1.39.5
enableOption82	1.3.6.1.4.1.8691.7.69.1.39.5.1	integer	read-write	Enable DHCP Option 82 Enumeration: 'enable': 1, 'disable': 0.
option82Type	1.3.6.1.4.1.8691.7.69.1.39.5.2	integer	read-write	Option 82 Type selector Enumeration: 'client-id': 2, 'ip': 0, 'mac': 1, 'other': 3.
option82Value	1.3.6.1.4.1.8691.7.69.1.39.5.3	displaystring	read-write	Option 82 Type Value
option82ValueDisplay	1.3.6.1.4.1.8691.7.69.1.39.5.4	displaystring	read-only	Option 82 Type Value Display
dhcpFunctionTable	1.3.6.1.4.1.8691.7.69.1.39.6		no-access	DHCP Function Table.
dhcpFunctionEntry	1.3.6.1.4.1.8691.7.69.1.39.6.1		no-access	DHCP Function Table Entry.
dhcpPortIndex	1.3.6.1.4.1.8691.7.69.1.39.6.1.1	integer	read-only	The DHCP Port Index.
circuitID	1.3.6.1.4.1.8691.7.69.1.39.6.1.2	displaystring	read-only	The Circuit ID.
option82Enable	1.3.6.1.4.1.8691.7.69.1.39.6.1.3	integer	read-write	This enable option 82 of the port. Enumeration: 'enable': 1, 'disable': 0.
ieee1588Setting	1.3.6.1.4.1.8691.7.69.1.41
ptpv1Setting	1.3.6.1.4.1.8691.7.69.1.41.1
enablePtpv1	1.3.6.1.4.1.8691.7.69.1.41.1.1	integer	read-write	This enable the PTP functon. Enumeration: 'enable': 1, 'disable': 0.
clockModev1	1.3.6.1.4.1.8691.7.69.1.41.1.2	integer	read-write	the clock mode of the PTP clock. Enumeration: 'v2E2EBC': 4, 'v2E2E2stepTC': 1, 'v2P2PBC': 5, 'v2P2PTC': 3, 'v1BC': 0.
syncIntervalv1	1.3.6.1.4.1.8691.7.69.1.41.1.3	integer	read-write	the logSyncInterval of the PTP clock. Enumeration: 'sixteenSec': 4, 'eightSec': 3, 'fourSec': 2, 'oneSec': 0, 'twoSec': 1.
subDomainNamev1	1.3.6.1.4.1.8691.7.69.1.41.1.4	integer	read-write	The subdomain name of the PTP clock. Enumeration: 'alt3': 3, 'alt1': 1, 'dflt': 0, 'alt2': 2.
preferMasterv1	1.3.6.1.4.1.8691.7.69.1.41.1.5	integer	read-write	This enable the PTP prefer master function. Enumeration: 'true': 1, 'false': 0.
ptpv2Setting	1.3.6.1.4.1.8691.7.69.1.41.2
enablePtp	1.3.6.1.4.1.8691.7.69.1.41.2.1	integer	read-write	This enable the PTP functon. Enumeration: 'enable': 1, 'disable': 0.
clockMode	1.3.6.1.4.1.8691.7.69.1.41.2.2	integer	read-write	the clock mode of the PTP clock. Enumeration: 'v2E2EBC': 4, 'v2E2E2stepTC': 1, 'v2P2PBC': 5, 'v2P2PTC': 3, 'v1BC': 0.
transport	1.3.6.1.4.1.8691.7.69.1.41.2.3	integer	read-write	the transport mode of the PTP clock. Enumeration: 'ieee802dot3': 0, 'ipv4': 1.
syncInterval	1.3.6.1.4.1.8691.7.69.1.41.2.4	integer	read-write	the logSyncInterval of the PTP clock. Enumeration: 't2sec': 1, 't256msec': -2, 't512msec': -1, 't1sec': 0, 't128msec': -3.
logMinDelayReqInterval	1.3.6.1.4.1.8691.7.69.1.41.2.5	integer	read-write	the logMinDelayReqInterval of the PTP clock. Enumeration: 't32sec': 5, 't4sec': 2, 't2sec': 1, 't1sec': 0, 't8sec': 3, 't16sec': 4.
logMinPdelayReqInterval	1.3.6.1.4.1.8691.7.69.1.41.2.6	integer	read-write	the logMinPdelayReqInterval of the PTP clock. Enumeration: 't32sec': 5, 't4sec': 2, 't2sec': 1, 't1sec': 0, 't8sec': 3, 't512msec': -1, 't16sec': 4.
logAnnounceInterval	1.3.6.1.4.1.8691.7.69.1.41.2.7	integer	read-write	the logAnnounceInterval of the PTP clock. Enumeration: 't4sec': 2, 't16sec': 4, 't2sec': 1, 't1sec': 0, 't8sec': 3.
announceReceiptTimeout	1.3.6.1.4.1.8691.7.69.1.41.2.8	integer	read-write	the announceReceiptTimeout of the PTP clock.
priority1	1.3.6.1.4.1.8691.7.69.1.41.2.9	integer	read-write	the priority1 of the PTP clock.
priority2	1.3.6.1.4.1.8691.7.69.1.41.2.10	integer	read-write	the priority2 of the PTP clock.
clockClass	1.3.6.1.4.1.8691.7.69.1.41.2.11	integer	read-write	the clockClass of the PTP clock.
domainNumber	1.3.6.1.4.1.8691.7.69.1.41.2.12	integer	read-write	The domain number of the PTP clock. Enumeration: 'alt3': 3, 'alt1': 1, 'dflt': 0, 'alt2': 2.
localUtcOffset	1.3.6.1.4.1.8691.7.69.1.41.2.13	integer	read-write	the UTC offset of the local PTP clock.
localUtcOffsetValid	1.3.6.1.4.1.8691.7.69.1.41.2.14	integer	read-write	the UTC offset valid of the local PTP clock. Enumeration: 'true': 1, 'false': 0.
localLeap59	1.3.6.1.4.1.8691.7.69.1.41.2.15	integer	read-write	the leap59 of the local PTP clock. Enumeration: 'true': 1, 'false': 0.
localLeap61	1.3.6.1.4.1.8691.7.69.1.41.2.16	integer	read-write	the leap61 of the local PTP clock. Enumeration: 'true': 1, 'false': 0.
localPtpTimescale	1.3.6.1.4.1.8691.7.69.1.41.2.17	integer	read-write	the timescale of the local PTP clock. Enumeration: 'arb': 0, 'ptp': 1.
localArbTime	1.3.6.1.4.1.8691.7.69.1.41.2.18	integer	read-write	the ARB time of the local PTP clock.
ptpv1Status	1.3.6.1.4.1.8691.7.69.1.41.3
offsetToMasterv1	1.3.6.1.4.1.8691.7.69.1.41.3.1	integer	read-only	The offset to master for nsec.
meanPathDelayv1	1.3.6.1.4.1.8691.7.69.1.41.3.2	integer	read-only	The mean path delay of the PTP clock.
grandMasterUuidv1	1.3.6.1.4.1.8691.7.69.1.41.3.3	macaddress	read-only	The grand master UUID address of the PTP clock.
parentUuidv1	1.3.6.1.4.1.8691.7.69.1.41.3.4	macaddress	read-only	The parent master UUID address of the PTP clock.
clockStratumv1	1.3.6.1.4.1.8691.7.69.1.41.3.5	integer	read-only	The clock stratum of the PTP clock.
clockIdentifierv1	1.3.6.1.4.1.8691.7.69.1.41.3.6	displaystring	read-only	The clock identifier of the PTP clock.
ptpv2Status	1.3.6.1.4.1.8691.7.69.1.41.4
offsetToMaster	1.3.6.1.4.1.8691.7.69.1.41.4.1	integer	read-only	The offset to master for nsec.
meanPathDelay	1.3.6.1.4.1.8691.7.69.1.41.4.2	integer	read-only	The mean path delay of the PTP clock.
parentIdentity	1.3.6.1.4.1.8691.7.69.1.41.4.3	displaystring	read-only	The parent identity of the PTP clock.
grandmasterIdentity	1.3.6.1.4.1.8691.7.69.1.41.4.4	displaystring	read-only	The grandmaster identity of the PTP clock.
grandmasterClockClass	1.3.6.1.4.1.8691.7.69.1.41.4.5	integer	read-only	The grandmaster clockClass of the PTP clock.
grandmasterClockAccuracy	1.3.6.1.4.1.8691.7.69.1.41.4.6	integer	read-only	The grandmaster clockAccuracy of the PTP clock.
grandmasterPriority1	1.3.6.1.4.1.8691.7.69.1.41.4.7	integer	read-only	The grandmaster priority1 of the PTP clock.
grandmasterPriority2	1.3.6.1.4.1.8691.7.69.1.41.4.8	integer	read-only	The grandmaster priority2 of the PTP clock.
stepsRemoved	1.3.6.1.4.1.8691.7.69.1.41.4.9	integer	read-only	The steps removed of the PTP clock.
currentUtcOffset	1.3.6.1.4.1.8691.7.69.1.41.4.10	integer	read-only	The current utc offset of the PTP clock.
currentUtcOffsetValid	1.3.6.1.4.1.8691.7.69.1.41.4.11	displaystring	read-only	The current utc offset valid flag of the PTP clock.
leap59	1.3.6.1.4.1.8691.7.69.1.41.4.12	displaystring	read-only	The leap59 of the PTP clock.
leap61	1.3.6.1.4.1.8691.7.69.1.41.4.13	displaystring	read-only	The leap61 of the PTP clock.
ptpTimescale	1.3.6.1.4.1.8691.7.69.1.41.4.14	displaystring	read-only	The ptp timescale of the PTP clock.
timesource	1.3.6.1.4.1.8691.7.69.1.41.4.15	displaystring	read-only	The timesource of the PTP clock.
ptpPortTable	1.3.6.1.4.1.8691.7.69.1.41.5		no-access	The ptp port table.
ptpPortEntry	1.3.6.1.4.1.8691.7.69.1.41.5.1		no-access	The ptp port entry.
ptpPortIndex	1.3.6.1.4.1.8691.7.69.1.41.5.1.1	integer	read-only	The ptp port index.
ptpPortEnable	1.3.6.1.4.1.8691.7.69.1.41.5.1.2	integer	read-write	This enable the ptp port. Enumeration: 'enable': 1, 'disable': 0.
ptpPortStatus	1.3.6.1.4.1.8691.7.69.1.41.5.1.3	integer	read-only	This port status of the PTP clock. Enumeration: 'ptpFaulty': 1, 'ptpSlave': 8, 'ptpPassive': 6, 'ptpUncalibrated': 7, 'ptpListening': 3, 'ptpInitializing': 0, 'ptpPreMaster': 4, 'ptpMaster': 5, 'ptpDisabled': 2.
diagnosis	1.3.6.1.4.1.8691.7.69.1.42
lldpSetting	1.3.6.1.4.1.8691.7.69.1.42.1
enableLLDP	1.3.6.1.4.1.8691.7.69.1.42.1.1	integer	read-write	This enable the LLDP functon. Enumeration: 'enable': 1, 'disable': 0.
lldpMSGInterval	1.3.6.1.4.1.8691.7.69.1.42.1.2	integer	read-write	The LLDP message transmit interval.
agingTime	1.3.6.1.4.1.8691.7.69.1.44	integer	read-write	Web Timeout
garpSetting	1.3.6.1.4.1.8691.7.69.1.45
joinTime	1.3.6.1.4.1.8691.7.69.1.45.1	integer	read-write	Join Time (ms).
leaveTime	1.3.6.1.4.1.8691.7.69.1.45.2	integer	read-write	Leave Time (ms).
leaveAllTime	1.3.6.1.4.1.8691.7.69.1.45.3	integer	read-write	Leaveall Time (ms).
eventlog	1.3.6.1.4.1.8691.7.69.1.46
eventlogTable	1.3.6.1.4.1.8691.7.69.1.46.1		no-access	The table of eventlog.
eventlogEntry	1.3.6.1.4.1.8691.7.69.1.46.1.1		no-access	The table entry of eventlog.
eventlogIndex	1.3.6.1.4.1.8691.7.69.1.46.1.1.1	integer	read-only	The index of eventlog entry.
eventlogBootup	1.3.6.1.4.1.8691.7.69.1.46.1.1.2	integer	read-only	The reboot count of the system.
eventlogDate	1.3.6.1.4.1.8691.7.69.1.46.1.1.3	displaystring	read-only	The date of the event occured.
eventlogTime	1.3.6.1.4.1.8691.7.69.1.46.1.1.4	displaystring	read-only	The time of the event occured.
eventlogUptime	1.3.6.1.4.1.8691.7.69.1.46.1.1.5	displaystring	read-only	The time of the event occured after booting up.
eventlogEvent	1.3.6.1.4.1.8691.7.69.1.46.1.1.6	displaystring	read-only	The event which occured in the system.
eventlogClear	1.3.6.1.4.1.8691.7.69.1.46.2	integer	read-write	To clear the eventlog, set value 1 to this field. Enumeration: 'clear': 1, 'noop': 0.
industrialProtocol	1.3.6.1.4.1.8691.7.69.1.47
eipSetting	1.3.6.1.4.1.8691.7.69.1.47.1
enableEtherNetIP	1.3.6.1.4.1.8691.7.69.1.47.1.1	integer	read-write	This enable the EtherNet/IP functon. Enumeration: 'enable': 1, 'disable': 0.
modbusSetting	1.3.6.1.4.1.8691.7.69.1.47.2
enableModbus	1.3.6.1.4.1.8691.7.69.1.47.2.1	integer	read-write	This enable the Modbus functon. Enumeration: 'enable': 1, 'disable': 0.
profinetioSetting	1.3.6.1.4.1.8691.7.69.1.47.3
enableProfinetIO	1.3.6.1.4.1.8691.7.69.1.47.3.1	integer	read-write	This enable the PROFINET IO functon. Enumeration: 'enable': 1, 'disable': 0.
enableFactoryDefault	1.3.6.1.4.1.8691.7.69.1.48	integer	read-write	Reset all EtherDevice switch settings to factory default values Enumeration: 'activate': 1.
consoleLoginMode	1.3.6.1.4.1.8691.7.69.1.51	integer	read-write	This option can change console login mode. Enumeration: 'men': 0, 'cli': 1.
accessControlList	1.3.6.1.4.1.8691.7.69.1.52
accessControlTable	1.3.6.1.4.1.8691.7.69.1.52.1		no-access	The table of ACL rule settings. This table is used to configure ACL rules.
accessControlEntry	1.3.6.1.4.1.8691.7.69.1.52.1.1		no-access	The entry information of ACL table.
aclRuleIndex	1.3.6.1.4.1.8691.7.69.1.52.1.1.1	integer	read-only	The index of the ACL rule.
listID	1.3.6.1.4.1.8691.7.69.1.52.1.1.2	integer	read-only	The listID of the ACL rule.
filterType	1.3.6.1.4.1.8691.7.69.1.52.1.1.3	integer	read-only	The type of the ACL filter. Enumeration: 'ipBase': 0, 'macBase': 1.
actionFlag	1.3.6.1.4.1.8691.7.69.1.52.1.1.4	integer	read-only	The action of the ACL rule. Enumeration: 'deny': 1, 'permit': 0.
srcMacAddr	1.3.6.1.4.1.8691.7.69.1.52.1.1.5	macaddress	read-only	The source MAC address of the ACL rule.
srcMacMask	1.3.6.1.4.1.8691.7.69.1.52.1.1.6	macaddress	read-only	The mask of the source MAC address in the ACL rule.
dstMacAddr	1.3.6.1.4.1.8691.7.69.1.52.1.1.7	macaddress	read-only	The destination MAC address of the ACL rule.
dstMacMask	1.3.6.1.4.1.8691.7.69.1.52.1.1.8	macaddress	read-only	The mask of the destination MAC address in the ACL rule.
etherType	1.3.6.1.4.1.8691.7.69.1.52.1.1.9	integer	read-only	The ether type of the ACL rule. This setting will apply to both ARP and RARP traffic stream due to hardware platform design ! ! ! Because of hardware platform limitations, when Ether type ARP is selected the switch will not be able to filter packets by specific destination address ! ! !
vlanID	1.3.6.1.4.1.8691.7.69.1.52.1.1.10	integer	read-only	The VLAN ID of the ACL rule.
srcIpAddr	1.3.6.1.4.1.8691.7.69.1.52.1.1.11	ipaddress	read-only	The source IP address of the ACL rule.
srcNetmask	1.3.6.1.4.1.8691.7.69.1.52.1.1.12	ipaddress	read-only	The source IP address's mask of the ACL rule.
dstIpAddr	1.3.6.1.4.1.8691.7.69.1.52.1.1.13	ipaddress	read-only	The destination IP address of the ACL rule
dstNetmask	1.3.6.1.4.1.8691.7.69.1.52.1.1.14	ipaddress	read-only	The destination IP address's mask of the ACL rule.
protocolCode	1.3.6.1.4.1.8691.7.69.1.52.1.1.15	integer	read-only	The protocol code of the ACL rule.
srcsocketPort	1.3.6.1.4.1.8691.7.69.1.52.1.1.16	integer	read-only	The source UDP/TCP port of the ACL rule.
dstsocketPort	1.3.6.1.4.1.8691.7.69.1.52.1.1.17	integer	read-only	The destination UDP/TCP port of the ACL rule.
aclStatus	1.3.6.1.4.1.8691.7.69.1.52.1.1.18	integer	read-only	The status is active to indicate normal. Use createAndGo to create new on multiple SET. Use createAndWait to create new on one SET all then actvie. Use destroy to delete this row. Enumeration: 'active': 1, 'destroy': 6, 'createAndGo': 4, 'createAndWait': 5.
aclAttachmentTable	1.3.6.1.4.1.8691.7.69.1.52.2		no-access	The table of ACL attachment settings. This table is used to configure ACL attachment port and list name.
aclAttachmentEntry	1.3.6.1.4.1.8691.7.69.1.52.2.1		no-access	The entry information of ACL attachment table.
aclID	1.3.6.1.4.1.8691.7.69.1.52.2.1.1	integer	read-only	The listID of the ACL attachment entry.
ingressPort	1.3.6.1.4.1.8691.7.69.1.52.2.1.2	portlist	read-only	The ingress ports of the ACL attachment entry.
aclListName	1.3.6.1.4.1.8691.7.69.1.52.2.1.4	displaystring	read-only	The ACL entry name.
cpuLoading5s	1.3.6.1.4.1.8691.7.69.1.53	integer	read-only	CPU Loading for the past 5 seconds in %.
cpuLoading30s	1.3.6.1.4.1.8691.7.69.1.54	integer	read-only	CPU Loading for the past 30 seconds in %.
cpuLoading300s	1.3.6.1.4.1.8691.7.69.1.55	integer	read-only	CPU Loading for the past 5 minutes in %.
totalMemory	1.3.6.1.4.1.8691.7.69.1.56	integer	read-only	Total size of System RAM.
freeMemory	1.3.6.1.4.1.8691.7.69.1.57	integer	read-only	Total size of free dynamic memory
usedMemory	1.3.6.1.4.1.8691.7.69.1.58	integer	read-only	Total size of used dynamic memory
memoryUsage	1.3.6.1.4.1.8691.7.69.1.59	integer	read-only	The usage of memory size in %.
loopProtection	1.3.6.1.4.1.8691.7.69.1.61	integer	read-write	This enable the Loop Protection functon. Enumeration: 'enable': 1, 'disable': 0.
eventSettings	1.3.6.1.4.1.8691.7.69.1.62
systemEventSettingsTable	1.3.6.1.4.1.8691.7.69.1.62.1		no-access	The system event settings table.
systemEventSettingsEntry	1.3.6.1.4.1.8691.7.69.1.62.1.1		no-access	System Event Settings Entry.
systemEventIndex	1.3.6.1.4.1.8691.7.69.1.62.1.1.1	integer	read-only	Index of system event settings
systemEventActive	1.3.6.1.4.1.8691.7.69.1.62.1.1.2	integer	read-write	Status of active of system event settings Enumeration: 'active': 1, 'inactive': 0.
systemEventName	1.3.6.1.4.1.8691.7.69.1.62.1.1.3	displaystring	read-only	Name of system event settings
systemEventSupport	1.3.6.1.4.1.8691.7.69.1.62.1.1.4	integer	read-only	Status of support modules of system event settings. Enumeration: 'support-SNMP-Trap-Email': 3, 'support-Relay1-Relay2': 24, 'support-Syslog-Relay1-Relay2': 28, 'support-Relay2-only': 16, 'support-SNMPTrap-Relay1-Relay2': 25, 'support-SNMPTrap-only': 1, 'support-Syslog-Relay2': 20, 'support-Syslog-Relay1': 12, 'support-SNMPTrap-Syslog': 5, 'support-Email-Relay2': 18, 'support-Email-Relay1': 10, 'support-all-SNMPTrap-Email-Syslog-Relay1-Relay2': 31, 'support-SNMPTrap-Email-Syslog': 7, 'support-Email-Syslog-Relay2': 22, 'support-Email-Syslog-Relay1': 14, 'support-SNMPTrap-Relay2': 17, 'support-SNMPTrap-Relay1': 9, 'support-SNMPTrap-Email-Syslog-Relay2': 23, 'support-SNMPTrap-Email-Syslog-Relay1': 15, 'support-SNMPTrap-Syslog-Relay2': 21, 'support-SNMPTrap-Syslog-Relay1': 13, 'support-SNMPTrap-Email-Relay1': 11, 'support-SNMPTrap-Email-Relay2': 19, 'support-Syslog-only': 4, 'none': 0, 'support-Relay1-only': 8, 'support-Email-only': 2, 'support-Email-Syslog': 6, 'support-Email-Syslog-Relay1-Relay2': 30.
systemEventModuleEnable	1.3.6.1.4.1.8691.7.69.1.62.1.1.5	integer	read-write	Status of enable of system event settings. Enumeration: 'enable-SNMPTrap-Relay1-Relay2': 25, 'enable-Email-Syslog-Relay1-Relay2': 30, 'enable-Syslog-Relay1-Relay2': 28, 'enable-Email-Syslog-Relay2': 22, 'enable-Email-Syslog-Relay1': 14, 'enable-SNMPTrap-Email': 3, 'enable-Relay1-only': 8, 'enable-Email-only': 2, 'enable-Syslog-Relay2': 20, 'enable-Syslog-Relay1': 12, 'enable-SNMPTrap-Syslog': 5, 'enable-Email-Syslog': 6, 'enable-SNMPTrap-Email-Relay1': 11, 'enable-SNMPTrap-Email-Relay2': 19, 'enable-All-SNMPTrap-Email-Syslog-Relay1-Relay2': 31, 'enable-Email-Relay1': 10, 'enable-Email-Relay2': 18, 'enable-SNMPTrap-Syslog-Relay1': 13, 'enable-SNMPTrap-Syslog-Relay2': 21, 'enable-SNMPTrap-Email-Syslog-Relay1': 15, 'enable-SNMPTrap-Relay2': 17, 'enable-SNMPTrap-Relay1': 9, 'enable-SNMPTrap-Email-Syslog-Relay2': 23, 'none': 0, 'enable-Relay1-Relay2': 24, 'enable-Syslog-only': 4, 'enable-Relay2-only': 16, 'enable-SNMPTrap-only': 1, 'enable-SNMPTrap-Email-Syslog': 7.
systemEventSeverity	1.3.6.1.4.1.8691.7.69.1.62.1.1.6	integer	read-write	Severity of system event settings Enumeration: 'information': 6, 'notice': 5, 'emergency': 0, 'alert': 1, 'critical': 2, 'error': 3, 'debug': 7, 'warning': 4.
portEventSettingsTable	1.3.6.1.4.1.8691.7.69.1.62.2		no-access	The port event settings table.
portEventSettingsEntry	1.3.6.1.4.1.8691.7.69.1.62.2.1		no-access	Port Event Settings Entry.
portEventIndex	1.3.6.1.4.1.8691.7.69.1.62.2.1.1	integer	read-only	Index of port event settings
portEventLabel	1.3.6.1.4.1.8691.7.69.1.62.2.1.2	displaystring	read-only	Label of portEventIndex
portEventActive	1.3.6.1.4.1.8691.7.69.1.62.2.1.3	integer	read-write	Status of active of port event settings Enumeration: 'active': 1, 'inactive': 0.
portEventEnable	1.3.6.1.4.1.8691.7.69.1.62.2.1.4	integer	read-write	Status of event enable of port event settings Enumeration: 'none': 0, 'enable-LinkOn-LinkOff': 3, 'enable-LinkOn-only': 1, 'enable-LinkOff-TrafficOverload': 6, 'enable-All-LinkOn-LinkOff-TrafficOverload': 7, 'enable-LinkOn-TrafficOverload': 5, 'enable-TrafficOverload-only': 4, 'enable-LinkOff-only': 2.
portEventTrafficThreshold	1.3.6.1.4.1.8691.7.69.1.62.2.1.5	integer	read-write	Threshold of Traffic-Overload in percentage(%)
portEventTrafficDuration	1.3.6.1.4.1.8691.7.69.1.62.2.1.6	integer	read-write	Duration of Traffic-Overload in secs(s)
portEventModuleEnable	1.3.6.1.4.1.8691.7.69.1.62.2.1.7	integer	read-write	Status of module enable of port event settings. Enumeration: 'enable-SNMPTrap-Relay1-Relay2': 25, 'enable-Email-Syslog-Relay1-Relay2': 30, 'enable-Syslog-Relay1-Relay2': 28, 'enable-Email-Syslog-Relay2': 22, 'enable-Email-Syslog-Relay1': 14, 'enable-SNMPTrap-Email': 3, 'enable-Relay1-only': 8, 'enable-Email-only': 2, 'enable-Syslog-Relay2': 20, 'enable-Syslog-Relay1': 12, 'enable-SNMPTrap-Syslog': 5, 'enable-Email-Syslog': 6, 'enable-SNMPTrap-Email-Relay1': 11, 'enable-SNMPTrap-Email-Relay2': 19, 'enable-All-SNMPTrap-Email-Syslog-Relay1-Relay2': 31, 'enable-Email-Relay1': 10, 'enable-Email-Relay2': 18, 'enable-SNMPTrap-Syslog-Relay1': 13, 'enable-SNMPTrap-Syslog-Relay2': 21, 'enable-SNMPTrap-Email-Syslog-Relay1': 15, 'enable-SNMPTrap-Relay2': 17, 'enable-SNMPTrap-Relay1': 9, 'enable-SNMPTrap-Email-Syslog-Relay2': 23, 'none': 0, 'enable-Relay1-Relay2': 24, 'enable-Syslog-only': 4, 'enable-Relay2-only': 16, 'enable-SNMPTrap-only': 1, 'enable-SNMPTrap-Email-Syslog': 7.
portEventSeverity	1.3.6.1.4.1.8691.7.69.1.62.2.1.8	integer	read-write	Severity of port event settings Enumeration: 'information': 6, 'notice': 5, 'emergency': 0, 'alert': 1, 'critical': 2, 'error': 3, 'debug': 7, 'warning': 4.
managementInterface	1.3.6.1.4.1.8691.7.69.1.63
httpEnable	1.3.6.1.4.1.8691.7.69.1.63.1	integer	read-write	Status of http service Enumeration: 'enable': 1, 'disable': 0.
httpPort	1.3.6.1.4.1.8691.7.69.1.63.2	integer	read-write	Port of http service
sslEnable	1.3.6.1.4.1.8691.7.69.1.63.3	integer	read-write	Status of ssl(https) service Enumeration: 'enable': 1, 'disable': 0.
sslPort	1.3.6.1.4.1.8691.7.69.1.63.4	integer	read-write	Port of ssl(https) service
telnetEnable	1.3.6.1.4.1.8691.7.69.1.63.5	integer	read-write	Status of telnet service Enumeration: 'enable': 1, 'disable': 0.
telnetPort	1.3.6.1.4.1.8691.7.69.1.63.6	integer	read-write	Port of telnet service
sshEnable	1.3.6.1.4.1.8691.7.69.1.63.7	integer	read-write	Status of ssh service Enumeration: 'enable': 1, 'disable': 0.
sshPort	1.3.6.1.4.1.8691.7.69.1.63.8	integer	read-write	Port of telnet service
mgmtInterfaceAutoLogout	1.3.6.1.4.1.8691.7.69.1.63.9	integer	read-write	Web Timeout (Mins). Set 0 to disable
snmpdEnable	1.3.6.1.4.1.8691.7.69.1.63.10	integer	read-write	Status of snmp agent Enumeration: 'enable': 1, 'disable': 0.
snmpdPort	1.3.6.1.4.1.8691.7.69.1.63.11	integer	read-only	Port of snmp agent
moxaUtilityServiceEnable	1.3.6.1.4.1.8691.7.69.1.63.12	integer	read-write	Status of moxa utility service Enumeration: 'enable': 1, 'disable': 0.
moxaUtilityServicePort	1.3.6.1.4.1.8691.7.69.1.63.13	integer	read-only	Port of moxa utility service
httpMaxLoginUsers	1.3.6.1.4.1.8691.7.69.1.63.14	integer	read-write	Configure HTTP/HTTPS maximum login users
telnetMaxLoginUsers	1.3.6.1.4.1.8691.7.69.1.63.15	integer	read-write	Configure TELNET/SSH maximum login users
moxaNewCmdEnable	1.3.6.1.4.1.8691.7.69.1.63.16	integer	read-write	Status of new moxa utility service Enumeration: 'enable': 1, 'disable': 0.
switchLocator	1.3.6.1.4.1.8691.7.69.1.64
blinkingLocatorLED	1.3.6.1.4.1.8691.7.69.1.64.1	integer	read-write	Blinking switch locator LED. Enumeration: 'on': 1, 'off': 0.
disableLocatorLEDTime	1.3.6.1.4.1.8691.7.69.1.64.2	integer	read-write	Configure back-off time for disable switch locator LED.
uiVersion	1.3.6.1.4.1.8691.7.69.1.65	integer	read-only	New UI Version
supportIfXTable	1.3.6.1.4.1.8691.7.69.1.69	integer	read-only	Support 64 bit Counter (ifXTable). Enumeration: 'yes': 1, 'no': 0.
passwordPolicy	1.3.6.1.4.1.8691.7.69.1.70
pwdMinLength	1.3.6.1.4.1.8691.7.69.1.70.1	integer	read-write	Configure the minimum password length.
pwdComplexityCheckEnable	1.3.6.1.4.1.8691.7.69.1.70.2	integer	read-write	Enable password complexity check. Enumeration: 'enable': 1, 'disable': 0.
pwdComplexityCheckDigitEnable	1.3.6.1.4.1.8691.7.69.1.70.3	integer	read-write	Add password complexity check with digit. Enumeration: 'enable': 1, 'disable': 0.
pwdComplexityCheckAlphabetEnable	1.3.6.1.4.1.8691.7.69.1.70.4	integer	read-write	Add password complexity check with alphabet. Enumeration: 'enable': 1, 'disable': 0.
pwdComplexityCheckSpecialCharEnable	1.3.6.1.4.1.8691.7.69.1.70.5	integer	read-write	Add password complexity check with special-characters. Enumeration: 'enable': 1, 'disable': 0.
loginLockout	1.3.6.1.4.1.8691.7.69.1.71
loginFailureLockoutEnable	1.3.6.1.4.1.8691.7.69.1.71.1	integer	read-write	Enable login failure lockout. Enumeration: 'enable': 1, 'disable': 0.
loginFailureLockoutRetrys	1.3.6.1.4.1.8691.7.69.1.71.2	integer	read-write	Configure login failure lockout retry threshhold.
loginFailureLockoutTime	1.3.6.1.4.1.8691.7.69.1.71.3	integer	read-write	Configure login failure lockout time.(Min)
systemNotifyMessage	1.3.6.1.4.1.8691.7.69.1.72
httpLoginMessage	1.3.6.1.4.1.8691.7.69.1.72.1	displaystring	read-write	Configure HTTP/HTTPS login message.
httpLoginFailureMessage	1.3.6.1.4.1.8691.7.69.1.72.2	displaystring	read-write	Configure HTTP/HTTPS login failure message.
syslogManagement	1.3.6.1.4.1.8691.7.69.1.73
loggingCapacityThreshold	1.3.6.1.4.1.8691.7.69.1.73.1	integer	read-write	Configure event log capacity warning threshold.
loggingCapacityTrapWarningEnable	1.3.6.1.4.1.8691.7.69.1.73.2	integer	read-write	Enable event log capacity SNMP trap warning. Enumeration: 'enable': 1, 'disable': 0.
loggingCapacityEmailWarningEnable	1.3.6.1.4.1.8691.7.69.1.73.3	integer	read-write	Enable event log capacity email warning. Enumeration: 'enable': 1, 'disable': 0.
loggingOversizeAction	1.3.6.1.4.1.8691.7.69.1.73.4	integer	read-write	Set event log over-size action. Enumeration: 'stoprecord': 1, 'overwrite': 0.
certificateManagement	1.3.6.1.4.1.8691.7.69.1.74
sslCertGen	1.3.6.1.4.1.8691.7.69.1.74.1	integer	read-write	Generate SSL certificate. Enumeration: 'na': 0, 'generate': 1.
sshKeyGen	1.3.6.1.4.1.8691.7.69.1.74.2	integer	read-write	Generate SSH host key. Enumeration: 'na': 0, 'generate': 1.
ivlSwitch	1.3.6.1.4.1.8691.7.69.1.76	integer	read-only	Current switch runs IVL(Independent Vlan Learning) or SVL(Shared Vlan Learning) Enumeration: 'ivl': 1, 'svl': 0.
supportMacSticky	1.3.6.1.4.1.8691.7.69.1.77	integer	read-only	Support MAC Sticky feature or not. Enumeration: 'not-support': 0, 'support': 1.
serialNumber	1.3.6.1.4.1.8691.7.69.1.78	displaystring	read-only	Serial Number
configEncryptEnable	1.3.6.1.4.1.8691.7.69.1.79	integer	read-only	Configuration File Encryption Setting. Enumeration: 'enable': 1, 'disable': 0.
swTraps	1.3.6.1.4.1.8691.7.69.2
varconfigChangeTrap	1.3.6.1.4.1.8691.7.69.2.1	integer	read-only	The configuration has been changed. Enumeration: 'none': 1, 'configChanged': 2.
varpower1Trap	1.3.6.1.4.1.8691.7.69.2.2	integer	read-only	The power on/off changed. Enumeration: 'none': 1, 'on2off': 2, 'off2on': 3.
varpower2Trap	1.3.6.1.4.1.8691.7.69.2.3	integer	read-only	The power on/off changed. Enumeration: 'none': 1, 'on2off': 2, 'off2on': 3.
vartrafficOverloadTrap	1.3.6.1.4.1.8691.7.69.2.4	integer	read-only	The ethernet port's traffic loading exceeds the pre-defined value.
varredundancyTopologyChangedTrap	1.3.6.1.4.1.8691.7.69.2.5	integer	read-only	The redundancy topology has been changed. Enumeration: 'topologyChangedTurboChainHead': 3, 'none': 1, 'topologyChanged': 2, 'topologyChangedTurboChainTail': 4.
varturboRingCouplingPortChangedTrap	1.3.6.1.4.1.8691.7.69.2.6	integer	read-only	The coupling path of Turbo Ring has been changed. Enumeration: 'none': 1, 'couplingPortChanged': 2.
varturboRingMasterChangedTrap	1.3.6.1.4.1.8691.7.69.2.7	integer	read-only	The master of Turbo Ring has been changed. Enumeration: 'none': 1, 'ringMasterChanged': 2.
varPortLoopDetectedTrap	1.3.6.1.4.1.8691.7.69.2.17	integer	read-only	The DUT port is looping.
varRateLimitedOnTrap	1.3.6.1.4.1.8691.7.69.2.18	integer	read-only	The DUT port is rate limit. Enumeration: 'none': 1, 'rateLimitOFF': 3, 'rateLimitON': 2.
varLLDPChgTrap	1.3.6.1.4.1.8691.7.69.2.19	integer	read-only	The LLDP table is changing.
varABC02WarningTrap	1.3.6.1.4.1.8691.7.69.2.20	integer	read-only	Warning trap while specific error is occured in abc02. Enumeration: 'nnauthorizedMediaIsDetected': 2, 'autoImportConfigurationFail': 5, 'noEnoughSpace': 1, 'exportLogFail': 4, 'exportConfigurationFail': 3.
varturboRingMasterMismatchTrap	1.3.6.1.4.1.8691.7.69.2.22	integer	read-only	The master of Turbo Ring has been mismatch. Enumeration: 'none': 1, 'ringMasterMismatch': 2.
varUserAuthSuccessTrap	1.3.6.1.4.1.8691.7.69.2.24	octet string	read-only	Account authentication success.
varUserAuthFailTrap	1.3.6.1.4.1.8691.7.69.2.25	octet string	read-only	Account authentication failed.
varMacStickyPortViolationPortDisableTrap	1.3.6.1.4.1.8691.7.69.2.26	integer	read-only	The number of sticky Mac address on the port was over the limit. A macStickyPortViolationPortDisableTrap will contain 3 elements: port, macaddr, and vlanid. Enumeration: 'none': 1, 'violationPortDisable': 2.
varFiberWarningTrap	1.3.6.1.4.1.8691.7.69.2.28	integer	read-only	Warning trap while fiber is over threshold.
varLoggingCapacityTrap	1.3.6.1.4.1.8691.7.69.2.29	integer	read-only	Warning trap while event log is over capacity threshold.
varUserInfoChgTrap	1.3.6.1.4.1.8691.7.69.2.31	octet string	read-only	Account information has been changed.
varConfigImportTrap	1.3.6.1.4.1.8691.7.69.2.32	integer	read-only	Configuration has been imported.
varRemoteAuthSuccessTrap	1.3.6.1.4.1.8691.7.69.2.38	integer	read-only	The login authentication is successful by the remote server Enumeration: 'tacacs': 1, 'radius': 2.
varRemoteAuthFailTrap	1.3.6.1.4.1.8691.7.69.2.39	integer	read-only	The login authentication is failed by the remote server Enumeration: 'tacacs': 1, 'radius': 2.