MMB-COM-MIB: View SNMP OID List / Download MIB

Agent identification string; Not supported.

Agent's company name (e.g. Fujitsu Siemens Computers); Not supported.

Agent's version string (e.g. 1.05); Not supported.

Compilation time and date of agent program; Not supported.

Defines whether writable objects can be written (except shutdown/power-off operations); Not supported. Enumeration: 'unknown': 1, 'write-not-allowed': 2, 'write-allowed': 3.

Defines whether shutdown/power-off objects can be written; Not supported. Enumeration: 'unknown': 1, 'shutdown-not-allowed': 2, 'shutdown-allowed': 3.

Unit identifier number of the local server (usually is ID 1). This ID can be used as index into the units table.

Actual power supply output load in Watts (0 = not available); Not supported.

Number of available units (size of units table).

Description of all units in this MIB

Unit identifier (index: 1..n)

Unit classification (type) Enumeration: 'gspb': 28, 'gspb-nodivided': 30, 'lpci-box': 34, 'iou-nodivided': 9, 'io': 7, 'partition': 2, 'op-panel': 20, 'pci-box': 10, 'iou-divided': 8, 'dvdb': 33, 'gspb-divided': 29, 'chassis': 1, 'fan': 35, 'sas-unit': 31, 'fan-tray': 17, 'sb': 4, 'ps': 32, 'free-pool': 3, 'd': 36, 'mmb': 21.

Physical identification number or partition identification number of units. The ID of the 'chassis' is usually 0.

Unit identification name. (e.g. 'SB#1') This object returns 'Part Number'; if the index shows chassis.

Unit model name (e.g. 'PRIMERGY PRIMEQUEST 3200 model xxx')

Unit manufacturer name (e.g. 'Fujitsu')

Unit serial number (e.g. '0202456123')

Unit location string (e.g. 'ServerCenter Room 17; Rack 9')

Unit contact name (e.g. 'Mr. Bond')

URL of administration HTML interface(MMB-GUI) (e.g. 'http://MyServer/admin')

Status describing whether the front door is open or closed; Not supported. Enumeration: 'unknown': 1, 'open': 2, 'close': 3.

Status describing whether the housing is open or closed; Not supported. Enumeration: 'opened-and-closed': 4, 'unknown': 1, 'open': 2, 'close': 3.

Supported languages of text message log (comma-seperated list of decimal language codes; see sc2MessageTextLogTable). e.g. '1031;1033' means German and English are supported. English (1033) is the default language and is always available; Not supported.

Unit World Wide Name. A 64-bit sized address for storage devices (e.g. '6661E2B0A00B88FB'); Not supported.

REMCS system identification string (binary data); Not supported. Format of Fujitsu REMCS ID (40byte) Format = TTMMMMMMMMMMMMmmmmmmmmmmmmCCnnnnnnnnnnnn TT : 2byte : Type ID for Company Name MM...M : 12byte : Model Name mm...m : 12byte : Device Name CC : 2byte : Checksum nn...n : 12byte : Serial number

Customer specific asset tag (40 bytes)

IPv4 address of the partition for management purpose (e.g. '192.168.0.140')

IPv6 address of the partition for management purpose (e.g. '2001:0db8:0000:85a3:0000:0000:ac1f:8001')

Counter defining the update revision of the unit table. This counter is incremented with every table contents change/update.

Parent-child relationship of all units

Unit identifier (index: 1..n)

Parent number (index: 1..n)

Parent unit. This is the same value as in the object of 'pParentNr'.

Unit classification (type). This is the same value as in units table. Enumeration: 'gspb': 28, 'gspb-nodivided': 30, 'lpci-box': 34, 'iou-nodivided': 9, 'io': 7, 'partition': 2, 'op-panel': 20, 'pci-box': 10, 'iou-divided': 8, 'dvdb': 33, 'gspb-divided': 29, 'chassis': 1, 'fan': 35, 'sas-unit': 31, 'fan-tray': 17, 'sb': 4, 'ps': 32, 'free-pool': 3, 'd': 36, 'mmb': 21.

Parent-child relationship of all units

Unit identifier (index: 1..n)

Child number (index: 1..n)

Child unit. This is the same value as in the object of 'cChildNr'.

Unit classification (type). This is the same value as in units table. Enumeration: 'gspb': 28, 'gspb-nodivided': 30, 'lpci-box': 34, 'iou-nodivided': 9, 'io': 7, 'partition': 2, 'op-panel': 20, 'pci-box': 10, 'iou-divided': 8, 'dvdb': 33, 'gspb-divided': 29, 'chassis': 1, 'fan': 35, 'sas-unit': 31, 'fan-tray': 17, 'sb': 4, 'ps': 32, 'free-pool': 3, 'd': 36, 'mmb': 21.

Counter defining the update revision of the parent-child unit table. This counter is incremented with every table contents change/update.

SNMP management node addresses (how to address the units)

Unit identifier (index: 1..n)

Management node address number (index: 1..n)

Management node interface type Enumeration: 'ipv6-virtual-ip': 6, 'ipv6-ip': 4, 'unknown': 1, 'ip': 2, 'ipx': 3, 'virtual-ip': 5.

Management node address (e.g. 192.168.0.100)

Management node address (e.g. 255.255.255.128)

Management node address (e.g. 192.168.0.126)

Management node name (e.g. 'primequest-no1')

Management node class: primary: operating system interface secondary: remote management controller interface management-blade: management blade in blade server secondary-backup: backup remote management controller interface Enumeration: 'secondary-manegement-blade': 8, 'primery': 2, 'unknown': 1, 'secondary-remote-backup': 6, 'manegement-blade': 4, 'secondary-remote': 5, 'baseboard-controller': 7, 'secondary': 3.

Management node hardware (MAC) address; ff:ff:ff:ff:ff:ff if value not available

Management node uses DHCP to obtain its address Enumeration: 'unknown': 1, 'use-fixed-address': 2, 'use-dhcp': 3.

The type of the remote management controller (for identification); like 'RSB'; 'RSB S2'; 'RSB S2 LP'... These names will not be changed if defined once; Not supported.

The model name of the remote management controller (for displaying); like 'Remote Service Board'; RemoteView Service Board S2'c This name should not be used for identification;only for displaying (can be changed in different firmware versions)! Not supported.

The FW version of the remote management controller; Not supported.

Counter defining the update revision of the management node table. This counter is incremented with every table contents change/update.

The type of the management channel currently used (this MIB instance). Enumeration: 'unknown': 1, 'secondary': 3, 'primery': 2.

System management service processors

Unit identifier (index: 1..n)

Service processor number (index: 1..n)

Service processor model name

Service processor firmware version / revision

Service processor backup battery status Enumeration: 'discharging': 7, 'ok': 3, 'unknown': 1, 'recharging': 5, 'failed': 6, 'not-present': 2, 'on-battery': 4.

Maximum time (in seconds) this backup battery can discharged. after that a shutdown will be performed (-1 = unknown); Not supported.

Time (in seconds) the service processor is running on battery since power fail (will be cleared on power recovery); Not supported.

Perform a discharge/charge cycle on the backup battery by writing a non-zero value. Reading this object just returns the value 0; Not supported.

Reads the current charge level of the rechargeable battery (in percent of the maximum capacity); Not supported.

UPS nodes managed by the units; Not supported.

Unit identifier (index: 1..n); Not supported.

UPS number (index: 1..n); Not supported.

UPS vendor name; Not supported.

UPS model name; Not supported.

UPS IP address (represented as string; may also contain an IP V6 address); Not supported.

UPS MIB root OID; specifies the root OID of the MIB to be used to query UPS via SNMP (empty string if no SNMP agent available); Not supported.

UPS SNMP community name (empty string if no SNMP agent available); Not supported.

UPS HTTP interface port; specifies the TCP port number for accessing the UPS management interface via HTTP (0 if no HTTP server available); Not supported.

Management node timezone (e.g. '2004-9-22 12:15:18+09:00')

Table containing information about the available servers

Unit identifier (index: 1..n)

Size of physical main memory installed (MBytes); Not supported.

Result of last system boot; Not supported. Enumeration: 'no-boot-cp': 4, 'diagnostic-boot-failed': 7, 'os-boot-successful': 2, 'unknown': 1, 'diagnostic-boot-successful': 3, 'hardware-failure': 8, 'no-bootable-media': 5, 'os-failed-load': 6.

Status of the current boot unknown(1)' returns; during the Power-on->POST and the shutdown->Power-off. Enumeration: 'no-boot-cp': 3, 'reset': 12, 'os-shutdown': 10, 'off': 2, 'halt': 16, 'xpar-firm-running': 17, 'dumping': 15, 'unknown': 1, 'setup': 5, 'diagnostic-shutdown': 11, 'os-boot': 6, 'os-running': 8, 'diagnostic-boot': 7, 'panic': 13, 'check-stop': 14, 'self-test': 4, 'diagnostic-running': 9.

Shutdown the server and switch off or reset; a delay (see object below) can be defined before the command is being executed; on reading that value you get the currently pending or executing command value; argument tells what kind of action: power-on: switch power on power-off: switch power off power-cycle: switch power off and switch power on again. shutdown-and-off: execute a shutdown then power off shutdown-and-reset: execute a shutdown then reset shutdown-and-power-cycle: execute a shutdown then power off and on again raise-nmi: raise an NMI (normally causes debugger to start) The value unknown(1) cannot be set; Not supported. Enumeration: 'reset': 10, 'power-off': 2, 'unknown': 1, 'raise-nmi': 8, 'power-on': 3, 'shutdown-and-off': 5, 'shutdown-and-reset': 6, 'abort-pending-command': 9, 'shutdown-and-power-cycle': 7, 'power-cycle': 4.

Delay time (seconds) the agent waits before executing the shutdown command (see previous command). 0 = immediate action; no delay -1 = unknown (delay not supported) The value unknown(-1) cannot be set; Not supported.

Universal Unique ID (UUID) number - this is a world wide unique ID number of the server. Can be used for identifying a server. The format is like this: 157E465A-A4AC-D711-A847-DD85CECD12EC.

Size of physical main memory available to the operating system (MBytes). This value is similar to sc2srvPhysicalMemory'; but may be less if the system has mirror or hot spare memory modules; Not supported.

Trusted Platform Module(TPM) setting. Enumeration: 'enable': 2, 'disable': 1.

BMC management address (e.g. 192.168.0.150)

Unit power-on and -off information

Unit identifier (index: 1..n)

Current power on/off status Enumeration: 'unknown': 1, 'off': 2, 'on': 3.

Reason why the system was switched off last time; Not supported. Enumeration: 'remote-off': 11, 'fan-fail': 6, 'power-limiting': 35, 'watchdog-power-cycle': 37, 'temperature-damage': 8, 'keyboard': 29, 'watchdog': 10, 'power-supply-failure': 9, 'power-button': 3, 'ac-fail': 4, 'clock': 5, 'swoff-command': 2, 'unknown': 1, 'temperature-critical': 7, 'warmstart': 24, 'reset-button': 25, 'firmware-restart': 242, 'cpu-error': 14, 'remote-manager-reset': 32, 'hardware-reset': 23, 'nmi': 20, 'mmb-continuous-operation': 36, 'peripheral-bus-error': 13, 'remote-manager': 31, 'hardware-fail': 12, 'ac-fail-reboot': 26, 'housing-opened': 243.

Source the system was switched on from; Not supported. Enumeration: 'fan-fail': 6, 'chipcard-reader': 30, 'temperature-damage': 8, 'keyboard': 29, 'watchdog': 10, 'power-supply-failure': 9, 'power-button': 3, 'ac-fail': 4, 'clock': 5, 'swoff-command': 2, 'unknown': 1, 'mgmt-processor-fail': 27, 'temperature-critical': 7, 'warmstart': 24, 'power-cycle': 33, 'reset-button': 25, 'pci-pme': 28, 'remote-on': 11, 'firmware-restart': 242, 'cpu-error': 14, 'remote-manager-reset': 32, 'hardware-reset': 23, 'nmi': 20, 'peripheral-bus-error': 13, 'remote-manager': 31, 'hardware-fail': 12, 'ac-fail-reboot': 26, 'housing-opened': 243.

Time and Date the system was booted (seconds since 1/1/1970; -1 = unknown); Not supported.

Tells how often the server was switched on in its life (-1 = unknown); Not supported.

Tells how long the system has stayed ON in its life (in hours; -1 = unknown); Not supported.

Tells how long the system has stayed OFF in its life (in hours; -1 = unknown); Not supported.

Action on AC power recovery after AC has failed. not-available(2) : function not available; behavior is hardware-defined. as-before(3) : server gets the same power state as before the AC fail. remain-off(4) : server remains off on power resume. switch-on(5) : server is always switched on on power resume. schedule-sync(6) : server synchronizes the power state with the schedule setting. Enumeration: 'not-available': 2, 'schedule-sync': 6, 'unknown': 1, 'switch-on': 5, 'as-before': 3, 'remain-off': 4.

Switch the unit on or off; argument tells what kind of action: on: switch power on off: switch power off power-cycle: switch power off and switch power on again. The value unknown(1) cannot be set; Not supported. Enumeration: 'unknown': 1, 'off': 2, 'power-cycle': 4, 'on': 3.

Specifies whether the power supply system contains redundant power supplies: 0 : no redundant power supplies available 1 : redundant power supplies available

Server performance and utilization information; Not supported.

Unit identifier (index; 1..n); Not supported.

Server performance entry number (index; 1..n)

Server performance object type (description see below); Not supported. Enumeration: 'memory-physical': 6, 'memory-percent': 8, 'pci-transfer': 5, 'pci-load': 3, 'memory-total': 7, 'cpu-pverall': 2, 'pci-efficiency': 4, 'cp': 1.

Server performance value (value interpretation depending on type):; Not supported. cpu: Load of a single CPU in percent cpu-overall: Overall CPU load in percent pci-load: PCI bus load in percent pci-efficiency: PCI bus efficiency in percent (100% is optimum) pci-transfer: PCI bus transfer rate in MBytes/sec. memory-physical: Physical memory usage in MBytes memory-total: Total memory usage (physical + virtual) in MBytes memory-percent: Physical memory usage in percent

Name (short description) of the performance value (e.g. 'CPU1'). Can be used for displaying a list of performance values in the management frontend; Not supported.

Power on/off timer table; Not supported.

Unit identifier (index: 1..n); Not supported.

Day of the week the times should act upon (index); 1=Sunday 2=Monday... ; Not supported.

Time the system should be switched on (by the real-time clock; in minutes since midnight; -1 = disabled; no on time). Only values -1 and 0..1439 are allowed; Not supported.

Time the system should be switched off (by the real-time clock of software; in minutes since midnight; -1 = disabled; no on time). Only values -1 and 0..1439 are allowed; Not supported.

Power monitoring table

Unit identifier (index: 1..n)

Power monitoring and control available on this server: true: Power monitoring and power control is available false: Power monitoring and power control is not available

Power monitoring enable value: true: Power monitoring and data gathering is enabled false: Power monitoring and data gathering is disabled or not available

Nominal (maximum) value of the system's power consumption (in Watts; -1 if value not available)

Current value of the system's power consumption (in Watts; 4294967295(0xffffffff) if value not available)

Power mode control value; Not supported. disabled: The baseboard management controller does not control the power saving behaviour best-performance: The baseboard management controller gives best performance to the system (power consumption may be increased) minimum-power: The baseboard management controller controls the system in way to consume minimum power (performance may be reduced) automatic: The baseboard management controller automatically controls power consumption between good performance and low power consumption scheduled: The baseboard management controller controls power consumption by schedule Enumeration: 'scheduled': 6, 'minimum-power': 4, 'limited': 7, 'unknown': 1, 'best-performance': 3, 'disabled': 2, 'automatic': 5.

Maximum limit value of the system's power consumption (in Watts; -1 if value not available; only valid if limiting enabled)

Configured power control mode value: disabled: The management controller does not control the power saving behaviour best-performance: The management controller gives best performance to the system (power consumption may be increased) minimum-power: The management controller controls the system in way to consume minimum power (performance may be reduced) automatic: The management controller automatically controls power consumption between good performance and low power consumption scheduled: The management controller controls power consumption by schedule limited: The management controller controls power consumption by power limit low-noise: The management controller controls the power to ensure running Enumeration: 'scheduled': 6, 'minimum-power': 4, 'limited': 7, 'unknown': 1, 'low-noise': 8, 'best-performance': 3, 'disabled': 2, 'automatic': 5.

Configurd unit for the display of power consumption values: Watt: Power consumption values are displayed in Watts Btu/h: Power consumption values are displyed in Btu Enumeration: 'watt': 2, 'unknown': 1, 'bt': 3.

Utilization history table (for power consumption); table only contains existing values (no values for non-existing values); Not supported.

Unit identifier (index; 1..n); Not supported.

Utilization value entity; describes what kind of value to be requested; Not supported. powerConsumptionDay: power consumption values of the last 24 hours; one value (Watts) per minute powerConsumptionMonth: power consumption values of the last month; one value (Watts) per hour powerConsumptionYear: power consumption values of the last year; one value (Watts) per day Enumeration: 'powerConsumptionYear': 3, 'powerConsumptionDay': 1, 'powerConsumptionMonth': 2.

Time stamp of the currenty history entry (time_t = seconds since 1/1/1970; 0:00 AM); Not supported.

UUID of the hardware instance that delivered the value (from object sc2srvUUID); may change if an installation is migrated to another hardware (e.g. in blade environments); Not supported.

Average value (in Watts) within the monitored time period (minute; hour; day); Not supported.

Minimum (lowest) value within the monitored time period; Not supported.

Maximum (highest) value within the monitored time period; Not supported.

Power source information table

Unit identifier (index; 1..n)

System input power source type (e.g. 'AC'; 'DC')

System input phase of power source. Enumeration: 'unknown': 1, 'three-phase': 3, 'single-phase': 2.

System nominal input voltage of power source (in Volts; -1 if value not available).

Temperature sensors

Unit identifier (index: 1..n)

Temperature sensor number (index: 0..n)

Temperature sensor designation (e.g. SB#0-CPU#A0 Temp.)

Temperature sensor identification string (e.g. TEMP-RSB1); Not supported.

Status of the temperature sensor Status mapping. SEL level MIB Value Warning temperature-warning(6) Error temperature-critical(7) Error failed(5) Enumeration: 'not-available': 2, 'ok': 3, 'temperature-warning': 6, 'unknown': 1, 'temperature-critical': 7, 'failed': 5.

Current temperature at this sensor (degrees Celsius). This object returns 0; if the agent can not get the value.

Maximum temperature - warning level (degrees Celsius)

Maximum temperature - critical level (degrees Celsius). system shutdown may occur if this level is exceeded.

Reaction if temperature exceeds the critical level. Enumeration: 'shutdown-and-poweroff': 3, 'unknown': 1, 'continue': 2.

Fans

Unit identifier (index: 1..n)

Fan number (index: 0..n)

Fan designation (e.g. FAN-TRAY#00-Fan#00-1)

Fan identification string (e.g. FAN-1-POWERSUPPLY); Not supported.

Status of the fan Status mapping. SEL level MIB Value Error failed(5) Enumeration: 'prefailed-predicted': 5, 'redundant-fan-failed': 6, 'ok': 3, 'unknown': 1, 'disabled': 2, 'failed': 4, 'not-manageable': 7, 'not-present': 8.

Current fan speed (revolutions per minute). This object returns 0; if the agent can not get the value.

Quality of fan (in percent of nominal speed - measured at full speed); Not supported.

Reaction if the fan fails. Enumeration: 'shutdown-and-poweroff': 3, 'unknown': 1, 'continue': 2.

Delay time (in seconds) when shutdown should commit on fan fail (if shutdown-and-off is configured; 0 = immediately -1 = unknown; cannot be set); Not supported.

Exhaust airflow volume table

Unit identifier (index; 1..n)

System exhaust airflow volume ('-1' if value not available)

System exhaust airflow volume unit (e.g. 'cbm/h'; 'ccm/min'; ...)

System board (main board) information

Unit identifier (index: 1..n)

Model name (e.g. 'System Board')

Product number (may be identical to ModelName)

Revision string (e.g. 'WGS1 GS3')

Serial number (not available for all boards)

Power supplies

Unit identifier (index: 1..n)

Power supply (bay) number (index: 0..n)

Power supply designation (e.g. PWRSYS#1-FEP#0)

Power supply identification string (e.g. PS1); Not supported.

Power supply status Status mapping. SEL level MIB Value Warning ac-fail(5) Warning predictive-fail(9) Error failed(4) Error not-manageable(8) Enumeration: 'not-manageable': 8, 'ok': 3, 'ac-fail': 5, 'unknown': 1, 'critical-temperature': 7, 'failed': 4, 'not-present': 2, 'predictive-fail': 9, 'dc-fail': 6.

Voltages - all voltage values are in 1/100th Volts; a value of 330 means 3.30 Volts (0xffffffff = unknown)

Unit identifier (index: 1..n)

Voltage sensor number (index: 0..n)

Voltage designation string (e.g. SB#1-+5V#1)

Voltage status Status mapping. SEL level MIB Value Warning low-warning(7) Warning high-warning(8) Error too-low(4) Error too-high(5) Enumeration: 'not-available': 2, 'ok': 3, 'sensor-failed': 6, 'unknown': 1, 'high-warning': 8, 'too-low': 4, 'low-warning': 7, 'too-high': 5.

Voltage current value. This object returns 0; if the agent can not get the value.(1/100V)

Voltage nominal value; Not supported.

Voltage minimum level (1/100V)

Voltage maximum level (1/100V)

Current output load on this voltage line. in percent of the maximum load (0xffffffff = unknown); Not supported.

CPU description table

Unit identifier (index: 1..n)

CPU (socket) number (index: 0..n)

CPU designation (e.g. SB#0-CPU#A0)

CPU status Status mapping. SEL level MIB Value Warning disabled(4) Warning prefailed-warning(8) Error failed(6) Enumeration: 'prefailed-warning': 8, 'ok': 3, 'unknown': 1, 'disabled': 4, 'failed': 6, 'not-present': 2, 'error': 5, 'missing-termination': 7.

CPU model name (e.g. Itanium2 Processor)

CPU manufacturer name (e.g. Intel); Not supported.

CPU step / revision

CPU speed (frequency in MHz)

Number of (physically available) logical CPUs within one physical CPU (for hyper-threading and multi-core CPUs). This is the sum of all cores and all logical CPUs of a hyper-threading CPU; Not supported.

Size of first level cache (in kBytes; -1 if unknown); Not supported.

Size of second level cache (in kBytes; -1 if unknown); Not supported.

Size of third level cache (in kBytes; -1 if unknown)

Number of (physically available) cores within one physical CPU (for multi-core CPUs; platform dependent)

CPU family code. This enumerated value is specified by the DMTF SMBIOS specification (processor information; type 4); Not supported.

Number of effectively enabled cores within one physical CPU (for multi-core CPUs; 0 if unknown)

Main memory module table

Unit identifier (index: 1..n)

Memory module (socket) number (index: 0..n)

Memory module designation (e.g. SB#0-DIMM#0A0)

Memory module status Status mapping. SEL level MIB Value Warning failed-disabled(4) Warning warning(7) Error error(5) Error configuration-error(9) Enumeration: 'configuration-error': 9, 'ok': 3, 'unknown': 1, 'failed-disabled': 4, 'warning': 7, 'not-present': 2, 'error': 5, 'hot-spare': 8.

Memory module bank number (-1 if unknown); Not supported.

Memory module size (capacity in MBytes; -1 if unknown)

Memory module start address (in MBytes; -1 if unknown); Not supported.

Memory module form (SIMM DIMM ...); Not supported.

Memory module type (SDRAM DDRAM DDR2 DDR3 ...); Not supported.

Number of memory module correctable errors (-1 if unknown); Not supported.

Number of memory module uncorrectable errors (-1 if unknown); Not supported.

Memory module approved for this machine; Not supported. Enumeration: 'unknown': 1, 'yes': 3, 'no': 2.

Memory module configuration; Not supported. unknown(1): Module configuration could not be evaluated normal(2): Module is in normal non-redundant configuration or slot is empty disabled(3): Module is disabled (manually through BIOS setup) hotSpare(4): Module is a hot-spare (standby) module; which will be used as a run-time-replacement for failed modules mirror(5): Module is part of a mirror configuration raid(6): Module is part of a RAID configuration notUsable(7): Module is not usable in the actual configuration because of architectural restrictions This object replaces the previous redundancy status values hot-spare and mirror in sc2memModuleStatus. Enumeration: 'raid': 6, 'notUsable': 7, 'normal': 2, 'unknown': 1, 'hotSpare': 4, 'disabled': 3, 'mirror': 5.

Memory module actual front side bus frequency (in MHz; -1 if unknown). This value is based on the BIOS settings; Not supported.

Memory module maximum front side bus frequency (in MHz; -1 if unknown). This value is based on memory module SPD data; Not supported.

Memory module interface voltage interface description; Not supported.

Multithreading of CPU enabled; Not supported. Enumeration: 'disabled': 2, 'unknown': 1, 'enabled': 3.

Table of component power consumption data; Not supported.

Unit identifier (index; 1..n); Not supported.

Component class enumeration (based on IPMI v1.0 entity ID); Not supported. Enumeration: 'cooling-device': 29, 'cooling-unit': 30, 'chassis': 23, 'disk-bay': 26, 'processor-module': 9, 'sub-chassis': 24, 'memory-device': 32, 'disk': 4, 'processor': 3, 'memory-unit': 8.

Component index within class (1..n); Not supported.

Component designation; Not supported.

Current component power consumption in Watts; Not supported.

Trusted Platform Module (TPM) status information (see corresponding TPM specification for detailed description of these states)

Unit identifier (index: 1..n)

TPM hardware is available ('unknown' if hardware availability cannot be detected; no interface found)

TPM hardware is enabled by BIOS ('unknown' if hardware is not available; a reboot is required to change this value)

TPM is enabled (by software; cannot take ownership if disabled; 'unknown' if hardware is not available or disabled)

TPM is activated (by software; 'unknown' if hardware is not available or disabled)

TPM ownership is established (valid endorsement key is existing; 'unknown' if hardware is not available or disabled)

Error and event message handling; Not supported.

Unit identifier (index: 1..n); Not supported..

Message log entry number (index: 0..n); Not supported..

Message log entry data (binary; one message per table entry); Not supported..

Watchdogs

Unit identifier (index: 1..n)

Watchdog type Enumeration: 'management-controller': 6, 'boot': 5, 'management-soft': 8, 'hardware': 2, 'bios': 4, 'other': 1, 'remote-management-controller': 7, 'software': 3.

Watchdog status Enumeration: 'not-available': 4, 'unknown': 1, 'enable': 3, 'disable': 2.

Enable/disable watchdog Enumeration: 'unknown': 1, 'enable': 3, 'disable': 2.

Watchdog timeout period in seconds

Watchdog timeout action Enumeration: 'hardware-reset': 7, 'unknown': 1, 'reboot': 3, 'power-down': 6, 'continue': 2, 'power-cycle': 5, 'nmi': 4.

ASR&R (Automatic server recovery and restart) settings; Not supported.

Unit identifier (index: 1..n); Not supported.

Current number of retries to reboot/restart the server when a failure shutdown (and power-off) had occurred. After this number of retries the action defined in 'sc2asrRebootFailAction' will be executed (-1 = unknown; no retries). The value unknown(1) cannot be set; a SET will deliver 'badValue'; Not supported.

Default number of retries for server failure reboot. The previous object sc2asrNrRebootRetries will be set to this value after the server is working properly for a certain amount of time; Not supported.

Source medium to boot from (next time): operating-system: boot from floppy or hard disk diag-system: boot from alternate diagnostic system (only for SCSI systems; load diagnostic system from alternate IDE disk). remote-disk: boot from remote network disk The value unknown(1) cannot be set; a SET will deliver 'badValue'; Not supported. Enumeration: 'unknown': 1, 'remote-disk': 5, 'reserved': 3, 'operating-system': 2, 'diag-system': 4.

Specifies the action after a specified number of failed reboot retries (the object 'sc2asrNrRebootRetries' has reached zero).The value no-diag-system(4) means that a diagnostic system is not available; no other value can be set. The values unknown(1) and reserved(3) cannot be set; a SET will deliver 'badValue'; Not supported. Enumeration: 'unknown': 1, 'switch-off': 2, 'boot-diag-system': 3, 'no-diag-system': 4.

Delay (in minutes) when the system should be automatically switched on again (by real-time clock) after an error power-off. Setting this value to zero means immediate restart (power-cycle only). You can disable automatic restart by setting the 'sc2asrRebootFailAction' to 'switch-off' and the 'sc2asrDefaultRebootRetries' to zero; Not supported.

Describes what to do when a POST error has occurred (halt on any error; no halt on any error...). The values unknown(1) and other(9) cannot be set; a SET will deliver 'badValue'; Not supported. Enumeration: 'halt-on-any-error': 2, 'unknown': 1, 'other': 4, 'no-halt-on-any-error': 3.

Error and event message handling; reported as text strings; Not supported.

Unit identifier (index: 1..n); Not supported.

Message log entry language (index; Windows language code); Not supported. e.g. 1031; 1033 for German; English (default; always available)

Message log entry sequence number (index; 0..n); Not supported.

Message log entry time stamp (time_t = seconds since 1/1/1970; 0:00 AM); Not supported.

Message log entry message string (multi-byte string; multi-language; not every language may be implemented); Not supported.

Message log entry error code; Not supported.

Message log entry severity; Not supported. Enumeration: 'major': 3, 'critical': 4, 'informational': 1, 'minor': 2.

Component which caused the log message may be replaced by the customer (CSS=Customer Self Service); Not supported.

Action text strings for error and event messages; Not supported.

Action text language (index; Windows language code) e.g. 1031; 1033 for German; English; Not supported.

Action text error code (index); Not supported.

Message log entry severity; Not supported. Enumeration: 'resolution': 3, 'cause': 2, 'summary': 1.

Action text entry string index (index; 1..n); Not supported.

Action message string; Not supported.

Overall status of all monitored components in this agent ok(1): all subsystems and components working properly; no failure degraded(2): at least one component has a problem; system may still work properly error(3): severe problem; system will not work properly failed(4): one or more managed components have failed unknown(5): none of the subsystems had a valid status (e.g. during initialization) Enumeration: 'failed': 4, 'degraded': 2, 'ok': 1, 'unknown': 5, 'error': 3.

Table with status values of the components in this agent. The table summarizes all instances of one component to one status value.

Unit identifier (index: 1..n)

Component status type Enumeration: 'fan-redundancy': 10, 'power': 2, 'memory-modules': 8, 'power-supply-redundancy': 11, 'voltages': 6, 'cpus': 7, 'fans': 4, 'power-supplies': 5, 'temperatures': 3, 'system-boot': 1, 'total': 9.

Component status value (for description of status values see previous object) Status mapping. SEL level MIB Value Warning degraded(2) Warning failed(4) Error error(5) Enumeration: 'failed': 4, 'degraded': 2, 'ok': 1, 'unknown': 5, 'error': 3.

This table contains the component status sensor table of the BMC (baseboard management controller). Additionally it also holds the CSS (Customer Self Service) information; Not supported.

Unit identifier (index: 1..n); Not supported.

BMC component status sensor number (index; 1..n); Not supported.

Component status sensor designation string; Not supported.

Name of device (entity) the component status sensor belongs to; Not supported.

Instance number of device (entity) the component status sensor belongs to; Not supported.

If set; component has a physical status LED showing the sensor status; Not supported.

If set; component may be replaced by the customer (CSS component); Not supported.

Status returned by the component status sensor; Not supported. Enumeration: 'ok': 2, 'prefailure-warning': 4, 'unknown': 1, 'failure': 5, 'identify': 3, 'not-present': 6.

Spare part number of the replaceable component; used to create a link to the spare part list on the service's spare part catalogue. This usually is the component's designation string; with blanks substituted by underscores; Not supported.

Number of entries in the component status sensor table; Not supported.

Table containing some other maintenance objects.

Unit identifier (index: 1..n).

Memory module error counter start time (seconds since 1/1/1970; -1 if unknown). This is the time when the error counters were started or reset last time; Not supported.

Send a test trap (test alarm) to the manager application(s) to test connection and trap configuration; trap cannot be disabled. Initiate test trap sending by writing a non-zero value. Reading this object just returns the value 0; Not supported.

Add the specified IP address (of the management station) to the trap destination list of this server. That client will become an alarm receiver for traps of this server; Not supported.

maitenance status Enumeration: 'on': 2, 'off': 1.

Controller firmware version table

Unit identifier (index: 1..n)

Controller/firmware type Enumeration: 'baseboard-management-controller': 7, 'efi': 6, 'gswb-offline0': 8, 'management-controller': 2, 'bios': 1, 'sal': 5, 'gswb-online1': 11, 'gswb-online0': 10, 'total': 20, 'pal': 4, 'gswb-offline1': 9, 'remote-management-controller': 3.

Controller/firmware model name (e.g. 'Copernicus'...) TOTAL' shows all firmware version in system (including BIOS; BMC; MMB).

Controller/firmware version string (e.g. '3.81.02')

BMM physical number of controller/firmware on IOU.

Table with data of deployment information; Not supported.

Unit identifier (index: 1..n); Not supported.

Chassis serial number; Not supported.

MAC address 1; Not supported.

MAC address 2; Not supported.

MAC address 3; Not supported.

MAC address 4; Not supported.

IP address 1; Not supported.

IP address 2; Not supported.

IP address 3; Not supported.

IP address 4; Not supported.

IP subnet mask 1; Not supported.

IP subnet mask 2; Not supported.

IP subnet mask 3; Not supported.

IP subnet mask 4; Not supported.

IP gateway 1; Not supported.

IP gateway 2; Not supported.

IP gateway 3; Not supported.

IP gateway 4; Not supported.

Host name; Not supported.

URL in UNC notification (but in ASCII) to remote image file (with the extensions of *.img; *.cfg; *.txt); Not supported.

Status of this server: power-down(2): waiting for boot standby(3): power management mode system-boot-failure(4): system boot failure bios-setup(5): BIOS setup or boot phase booting(6): ACPI OS currently booting ; Not supported. Enumeration: 'standby': 3, 'unknown': 1, 'system-boot-failure': 4, 'power-down': 2, 'booting': 6, 'bios-setup': 5.

Defines whether the IP-LAN definitions are valid or not; Not supported. Enumeration: 'true': 3, 'unknown': 1, 'false': 2.

Defines if this server blade should be provided automatic recovery; Not supported. Enumeration: 'true': 3, 'unknown': 1, 'false': 2.

Status of current cloning process; Not supported. Enumeration: 'unknown': 1, 'cloned': 4, 'cloning': 3, 'not-cloned': 2.

Boot mode of the server for remote deployment: normal(2): boot from standard disk subsystem pxeBiosSetup(3): boot from PXE according to BIOS setup settings (for OEM systems) pxeLanx(y): boot from PXE LAN interface x (0..3) ; Not supported. Enumeration: 'normal': 2, 'unknown': 1, 'pxeLan1': 5, 'pxeLan0': 4, 'pxeLan3': 7, 'pxeLan2': 6, 'pxeBiosSetup': 3.

Table with data of server OEM information; Not supported.

Unit identifier (index: 1..n); Not supported.

OEM parameter ID (index: 1..10); Not supported.

OEM parameter data; Not supported.

Table with system LAN interfaces information: This table lists all real LAN interfaces in same physical order as the BIOS uses it for PXE boot. Only on-board interfaces are listed; no virtual interfaces.

Unit identifier (index; 1..n)

LAN interface number (index; 0..n)

LAN interface hardware (MAC) address; ff:ff:ff:ff:ff:ff if value not available