MITEL-IPLOGICAL-MIB: View SNMP OID List / Download MIB

VENDOR: MITEL, CORP.


 Home MIB: MITEL-IPLOGICAL-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, IF-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 mitel 1.3.6.1.4.1.1027
           mitelProprietary 1.3.6.1.4.1.1027.4
               mitelPropIpNetworking 1.3.6.1.4.1.1027.4.8
                   mitelIpNetRouter 1.3.6.1.4.1.1027.4.8.1
                       mitelRouterIpGroup 1.3.6.1.4.1.1027.4.8.1.1
                           mitelIpGrpLogicalGroup 1.3.6.1.4.1.1027.4.8.1.1.5
The MITEL IP MIB module.
                               mitelIpLogGrpLogicalTable 1.3.6.1.4.1.1027.4.8.1.1.5.1 no-access
A table containing information about logical IP LAN destinations.
                                   mitelIpLogGrpLogicalEntry 1.3.6.1.4.1.1027.4.8.1.1.5.1.1 no-access
Each entry of this table contains information about a specific logical interface to a local area network. Each logical LAN can support routing or bridging functions, these are considered virtual interfaces.
                                       mitelIpLogAdvertisementAddress 1.3.6.1.4.1.1027.4.8.1.1.5.1.1.1 ipaddress read-write
The IP destination address to be used for multicast Router Advertisements sent from the interface. The only permissible values are the all-systems multicast address, 224.0.0.1, or the limited-broadcast address, 255.255.255.255. (The all-systems address is preferred wherever possible, i.e., on any link where all listening hosts support IP multicast.) Default Value is 224.0.0.1
                                       mitelIpLogMaxAdvertisementInterval 1.3.6.1.4.1.1027.4.8.1.1.5.1.1.2 integer read-write
The maximum time allowed between sending multicast Router Advertisements from the interface, in seconds.
                                       mitelIpLogMinAdvertisementInterval 1.3.6.1.4.1.1027.4.8.1.1.5.1.1.3 integer read-write
The minimum time allowed between sending unsolicited multicast Router Advertisements from the interface, in seconds. Must be no greater than grIpLMaxAdvertisementInterval.
                                       mitelIpLogAdvertisementLifetime 1.3.6.1.4.1.1027.4.8.1.1.5.1.1.4 integer read-write
The value to be placed in the Lifetime field of Router Advertisements sent from the interface, in seconds. Must be no less than grIpLMaxAdvertisementInterval.
                                       mitelIpLogPerformRouterDiscovery 1.3.6.1.4.1.1027.4.8.1.1.5.1.1.5 integer read-write
A flag indicating whether or not the host is to perform ICMP router discovery on the interface. Enumeration: 'disabled': 2, 'enabled': 1.
                                       mitelIpLogSolicitationAddress 1.3.6.1.4.1.1027.4.8.1.1.5.1.1.6 ipaddress read-write
The IP destination address to be used for sending Router Solicitations from the interface. The only permissible values are the all-routers multicast address, 224.0.0.2, or the limited-broadcast address, 255.255.255.255. (The all-routers address is preferred wherever possible, i.e., on any link where all advertising routers support IP multicast.) Default 224.0.0.2
                                       mitelIpLogStatus 1.3.6.1.4.1.1027.4.8.1.1.5.1.1.7 rowstatus read-only
The current status of this entry.