METRO1500-MIB: View SNMP OID List / Download MIB

VENDOR: ADVA AG OPTICAL NETWORKING


 Home MIB: METRO1500-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 org 1.3
     dod 1.3.6
         internet 1.3.6.1
             private 1.3.6.1.4
                 enterprises 1.3.6.1.4.1
                     adva 1.3.6.1.4.1.2544
                               advaProducts 1.3.6.1.4.1.2544.1
                                   metro1500 1.3.6.1.4.1.2544.1.3
                                       metro1500Main 1.3.6.1.4.1.2544.1.3.1
                                           metro1500Housing 1.3.6.1.4.1.2544.1.3.1.1
                                               metro1500Manufacturer 1.3.6.1.4.1.2544.1.3.1.1.1 displaystring read-only
Manufacturer of the METRO1500 System
                                               metro1500MainType 1.3.6.1.4.1.2544.1.3.1.1.2 displaystring read-only
Type of the METRO1500 System
                                               metro1500MainSerialNumber 1.3.6.1.4.1.2544.1.3.1.1.3 displaystring read-only
Serial Number of the METRO1500 System
                                               metro1500MainHardwareVersion 1.3.6.1.4.1.2544.1.3.1.1.4 displaystring read-only
Hardware Version of the METRO1500 System
                                               metro1500MainSoftwareVersion 1.3.6.1.4.1.2544.1.3.1.1.5 displaystring read-only
Software Version of the METRO1500 System (Device Master).
                                               metro1500MainBusMessages 1.3.6.1.4.1.2544.1.3.1.1.6 integer read-only
Number of received internal Messages. This Number gives Information on the internal Activity of the METRO1500 System. This should be a large integer Number except when the System has just started. The Value is updated every five Seconds.
                                               metro1500MainBusErrors 1.3.6.1.4.1.2544.1.3.1.1.7 integer read-only
Number of dropped received internal Messages. This value should be 0 or a very small Integer.
                                               metro1500MainLastEvent 1.3.6.1.4.1.2544.1.3.1.1.8 integer read-only
Since SNMP Traps are not reliable, this Number can be polled periodically. The Value is set to a nonzero Integer when an Event occurs and cleared ten Minutes after the last Event.
                                               metro1500MainMotd 1.3.6.1.4.1.2544.1.3.1.1.9 displaystring read-only
Message Of The Day is the greeting when login via telnet. It shows the actual Kernel Version and the Software Update State. With the MOTD you get Information on the actual installed Software Packets.
                                               metro1500MainTrapsinkTable 1.3.6.1.4.1.2544.1.3.1.1.10 no-access
Table of Trapsinks
                                                     metro1500MainTrapsinkEntry 1.3.6.1.4.1.2544.1.3.1.1.10.1 no-access
Entries in the Trapsink Table
                                                         metro1500MainTrapsinkNumber 1.3.6.1.4.1.2544.1.3.1.1.10.1.1 integer read-only
Number of Trapsink
                                                         metro1500MainTrapsinkAddress 1.3.6.1.4.1.2544.1.3.1.1.10.1.2 displaystring read-only
IP Address of the Management System which should receive SNMP Traps. The Logfiles are also shown in this Table
                                                         metro1500MainTrapsinkCommunity 1.3.6.1.4.1.2544.1.3.1.1.10.1.3 displaystring read-only
Community String which is sent with a SNMP Trap to the Management Station
                                                         metro1500MainTrapsinkPriority 1.3.6.1.4.1.2544.1.3.1.1.10.1.4 integer read-only
Priority of the Trapsink (lower level gets less Traps)
                                               metro1500MainLogfileTable 1.3.6.1.4.1.2544.1.3.1.1.11 no-access
Table of Log Files
                                                     metro1500MainLogfileEntry 1.3.6.1.4.1.2544.1.3.1.1.11.1 no-access
Entries in the Logfile Table
                                                         metro1500MainLogfileNumber 1.3.6.1.4.1.2544.1.3.1.1.11.1.1 integer read-only
Number of Logfile
                                                         metro1500MainLogfileName 1.3.6.1.4.1.2544.1.3.1.1.11.1.2 displaystring read-only
Name of Logfile
                                                         metro1500MainLogfileSize 1.3.6.1.4.1.2544.1.3.1.1.11.1.3 integer read-only
Size of Logfile
                                                         metro1500MainLogfilePriority 1.3.6.1.4.1.2544.1.3.1.1.11.1.4 integer read-only
Priority of Logfile
                                           metro1500SlotTable 1.3.6.1.4.1.2544.1.3.1.2 no-access
Table of installed METRO1500 Components. Since METRO1500 can handle many different Components, in this Section only the common Information is displayed. Component specific Information is stored in different Subtrees.
                                               metro1500SlotEntry 1.3.6.1.4.1.2544.1.3.1.2.1 no-access
Installed METRO1500 Components
                                                   metro1500SlotNumber 1.3.6.1.4.1.2544.1.3.1.2.1.1 integer read-only
Slot Number of installed Component. The Device Master has always Slot Number 0 and is shown in the Main section.
                                                   metro1500Type 1.3.6.1.4.1.2544.1.3.1.2.1.2 displaystring read-only
Type of installed Component
                                                   metro1500SlotTypeNumber 1.3.6.1.4.1.2544.1.3.1.2.1.3 integer read-only
Integer Number between 0 and 255 unique for a specific type of installed Component. This Number can be used for management Systems to handle automatically the different Options of installed Components. Enumeration: 'metro1000Converter': 2, 'metro1500-EthernetHubCard': 39, 'nemi': 32, 'metro1500-2-5GbConverter': 5, 'metro1500-TRL-Converter': 7, 'metro1000EthernetConverter': 3, 'switch': 64, 'other': 255, 'metro1500-4PortTDMCard': 10, 'demi': 33, 'metro1500Converter': 1.
                                                   metro1500SerialNumber 1.3.6.1.4.1.2544.1.3.1.2.1.4 displaystring read-only
Serial Number of installed Component
                                                   metro1500HardwareVersion 1.3.6.1.4.1.2544.1.3.1.2.1.5 displaystring read-only
Hardware Version of installed Component
                                                   metro1500SoftwareVersion 1.3.6.1.4.1.2544.1.3.1.2.1.6 displaystring read-only
SoftwareVersion of installed Component
                                                   metro1500Temperature 1.3.6.1.4.1.2544.1.3.1.2.1.7 integer read-only
Temperature of installed Component in Celsius
                                                   metro1500BoardVoltage 1.3.6.1.4.1.2544.1.3.1.2.1.8 integer read-only
Voltage measured directly on the board in mV
                                                   metro1500DetailInfo 1.3.6.1.4.1.2544.1.3.1.2.1.9 object identifier read-only
A Reference to the MIB Definition where the special Options of the Component are described with more Details
                                                   metro1500EPLDVersion 1.3.6.1.4.1.2544.1.3.1.2.1.10 integer read-only
Software Version on the programmable Logic Circuit
                                           metro1500PSTable 1.3.6.1.4.1.2544.1.3.1.3 no-access
Table of installed Power Supplies
                                               metro1500PSEntry 1.3.6.1.4.1.2544.1.3.1.3.1 no-access
Installed METRO1500 Power Supplies
                                                   metro1500PSNumber 1.3.6.1.4.1.2544.1.3.1.3.1.1 integer read-only
Number of installed Power Supply
                                                   metro1500PSOn 1.3.6.1.4.1.2544.1.3.1.3.1.2 integer read-only
Is installed Power Supply On or Off Enumeration: 'on': 1, 'off': 2.
                                           metro1500FanTable 1.3.6.1.4.1.2544.1.3.1.4 no-access
Table of installed Fans
                                               metro1500FanEntry 1.3.6.1.4.1.2544.1.3.1.4.1 no-access
Installed METRO1500 Fans
                                                   metro1500FanNumber 1.3.6.1.4.1.2544.1.3.1.4.1.1 integer read-only
Number of installed Fan
                                                   metro1500FanOn 1.3.6.1.4.1.2544.1.3.1.4.1.2 integer read-only
Is installed Fan On or Off Enumeration: 'on': 1, 'off': 2.
                                       metro1500Converter 1.3.6.1.4.1.2544.1.3.5
                                           metro1500ConverterTable 1.3.6.1.4.1.2544.1.3.5.1 no-access
Table of installed METRO1500 Converters
                                               metro1500ConverterEntry 1.3.6.1.4.1.2544.1.3.5.1.1 no-access
Installed METRO1500 Converters
                                                   metro1500ConverterNumber 1.3.6.1.4.1.2544.1.3.5.1.1.1 integer read-only
Slot Number of installed Converter Card
                                                   metro1500RxLoc 1.3.6.1.4.1.2544.1.3.5.1.1.2 integer read-only
Local Receiver has Signal (On) or Loss of Signal (Off) Enumeration: 'on': 1, 'off': 2.
                                                   metro1500TxLoc 1.3.6.1.4.1.2544.1.3.5.1.1.3 integer read-only
Local Transmitter is On or Off Enumeration: 'alwaysOn': 3, 'on': 1, 'off': 2, 'alwaysOff': 4.
                                                   metro1500TxLocC 1.3.6.1.4.1.2544.1.3.5.1.1.4 integer read-only
Current of the local Transmitter in mA. This Entry is only available if a Current Sensor is installed
                                                   metro1500TxLocTemp 1.3.6.1.4.1.2544.1.3.5.1.1.5 integer read-only
Temperature of the local Transmitter in Celsius. This Entry is only available if the Laser is cooled
                                                   metro1500RxRem 1.3.6.1.4.1.2544.1.3.5.1.1.6 integer read-only
Remote Receiver has Signal (On) or Loss of Signal (Off) Enumeration: 'on': 1, 'off': 2.
                                                   metro1500TxRem 1.3.6.1.4.1.2544.1.3.5.1.1.7 integer read-only
Remote Transmitter is On or Off Enumeration: 'alwaysOn': 3, 'on': 1, 'off': 2, 'alwaysOff': 4.
                                                   metro1500TxRemC 1.3.6.1.4.1.2544.1.3.5.1.1.8 integer read-only
Current of the Remote Transmitter in Milli Ampere. This Entry is only available if a Current Sensor is installed
                                                   metro1500TxRemTemp 1.3.6.1.4.1.2544.1.3.5.1.1.9 integer read-only
Temperature of the Remote Transmitter in Celsius This Entry is only available if the Laser is cooled
                                                   metro1500RxRem2 1.3.6.1.4.1.2544.1.3.5.1.1.10 integer read-only
2nd Remote receiver has Signal (On) or Loss of Signal (Off). (Only available if a 2nd Remote Receiver is installed) Enumeration: 'on': 1, 'off': 2.
                                                   metro1500ClockState 1.3.6.1.4.1.2544.1.3.5.1.1.11 integer read-only
Status of the Clock. This Entry is only available if a Clock is installed. If the Clock is enabled, and has an error output, and cannot synchronize to the Signal, the Clock fails. Enumeration: 'fail': 3, 'on': 1, 'off': 2.
                                                   metro1500ClockFreq 1.3.6.1.4.1.2544.1.3.5.1.1.12 integer read-only
Frequency of the Clock in MBit/s. Only available if a Clock is installed.
                                                   metro1500LocLoop 1.3.6.1.4.1.2544.1.3.5.1.1.13 integer read-only
Local Loop is set to On or to Off Enumeration: 'on': 1, 'off': 2.
                                                   metro1500RemLoop 1.3.6.1.4.1.2544.1.3.5.1.1.14 integer read-only
Remote Loop is set to On or to Off Enumeration: 'on': 1, 'off': 2.
                                                   metro1500ClockType 1.3.6.1.4.1.2544.1.3.5.1.1.15 integer read-only
Type of the Clock. Only available, if a Clock is installed. Enumeration: 'fixedClock2500Mbps': 82, 'fixedClock155Mbps': 32, 'multiClockOCxGbEFC': 9, 'multiClockFCGbE': 3, 'fixedClock266MbpsModule': 51, 'multiClockFCGbEOnBoard': 11, 'fixedClock266Mbps': 52, 'other': 255, 'fixedClock125MbpsModule': 21, 'fixedClock125Mbps': 22, 'fixedClock200MbpsModule': 41, 'fixedClock1250Mbps': 76, 'multiClockLSModule': 1, 'fixedClock622Mbps': 62, 'fixedClock1250MbpsModule': 75, 'multiClockOCxGbE': 5, 'multiClockLS': 2, 'fixedClock155MbpsModule': 31, 'fixedClock200Mbps': 42, 'multiClockOCxFC': 7, 'fixedClock1062Mbps': 72, 'fixedClock622MbpsModule': 61, 'fixedClock1062MbpsModule': 71, 'fixedClock2500MbpsModule': 81.
                                       metro1500Switch 1.3.6.1.4.1.2544.1.3.10
                                             metro1500SwitchTable 1.3.6.1.4.1.2544.1.3.10.1 no-access
Table of installed METRO1500 Switches
                                                 metro1500SwitchEntry 1.3.6.1.4.1.2544.1.3.10.1.1 no-access
Installed METRO1500 Switches
                                                     metro1500SwitchNumber 1.3.6.1.4.1.2544.1.3.10.1.1.1 integer read-only
Slot Number of installed Remote Optical Switch Card
                                                     metro1500SwitchLine 1.3.6.1.4.1.2544.1.3.10.1.1.2 integer read-only
Active Line of Remote Optical Switch Enumeration: 'lineB': 2, 'lineA': 1.
                                                     metro1500SwitchMode 1.3.6.1.4.1.2544.1.3.10.1.1.3 integer read-only
Mode of Transmit Line of Remote Optical Switch Enumeration: 'locked': 2, 'automatic': 1.
                                                     metro1500SwitchLaserOn 1.3.6.1.4.1.2544.1.3.10.1.1.4 integer read-only
Shows if the reference Laser is On or Off Enumeration: 'on': 1, 'off': 2.
                                                     metro1500SwitchLineAavail 1.3.6.1.4.1.2544.1.3.10.1.1.5 integer read-only
Is Line A of Remote Optical Switch available? Enumeration: 'available': 1, 'notAvailable': 2.
                                                     metro1500SwitchLineBavail 1.3.6.1.4.1.2544.1.3.10.1.1.6 integer read-only
Is Line B of Remote Optical Switch available Enumeration: 'available': 1, 'notAvailable': 2.
                                       metro1500EthernetHub 1.3.6.1.4.1.2544.1.3.14
                                             metro1500EthernetHubTable 1.3.6.1.4.1.2544.1.3.14.1 no-access
Table of installed FSP-II Hub Cards
                                                 metro1500EthernetHubEntry 1.3.6.1.4.1.2544.1.3.14.1.1 no-access
Installed FSP-II Hub Cards
                                                     metro1500EthernetHubNumber 1.3.6.1.4.1.2544.1.3.14.1.1.1 integer read-only
Slot Number of installed Hub Card
                                                     metro1500EthernetHubPortEnable1 1.3.6.1.4.1.2544.1.3.14.1.1.10 integer read-only
is Hub Port 1 enabled ? Enumeration: 'enable': 1, 'disable': 2.
                                                     metro1500EthernetHubPortPartitionStatus1 1.3.6.1.4.1.2544.1.3.14.1.1.11 integer read-only
is Port 1 partitioned ? Enumeration: 'notPartitioned': 2, 'partitioned': 1.
                                                     metro1500EthernetHubPortLinkStatus1 1.3.6.1.4.1.2544.1.3.14.1.1.12 integer read-only
does Port 1 receive Link Pulses ? Enumeration: 'linked': 1, 'notLinked': 2.
                                                     metro1500EthernetHubPortPolarity1 1.3.6.1.4.1.2544.1.3.14.1.1.13 integer read-only
polarity of input signal at Port 1 Enumeration: 'positive': 1, 'negative': 2.
                                                     metro1500EthernetHubPortEnable2 1.3.6.1.4.1.2544.1.3.14.1.1.20 integer read-only
is Hub Port 2 enabled ? Enumeration: 'enable': 1, 'disable': 2.
                                                     metro1500EthernetHubPortPartitionStatus2 1.3.6.1.4.1.2544.1.3.14.1.1.21 integer read-only
is Port 2 partitioned ? Enumeration: 'notPartitioned': 2, 'partitioned': 1.
                                                     metro1500EthernetHubPortLinkStatus2 1.3.6.1.4.1.2544.1.3.14.1.1.22 integer read-only
does Port 2 receive Link Pulses ? Enumeration: 'linked': 1, 'notLinked': 2.
                                                     metro1500EthernetHubPortPolarity2 1.3.6.1.4.1.2544.1.3.14.1.1.23 integer read-only
polarity of input signal at Port 2 Enumeration: 'positive': 1, 'negative': 2.
                                                     metro1500EthernetHubPortEnable3 1.3.6.1.4.1.2544.1.3.14.1.1.30 integer read-only
is Hub Port 3 enabled ? Enumeration: 'enable': 1, 'disable': 2.
                                                     metro1500EthernetHubPortPartitionStatus3 1.3.6.1.4.1.2544.1.3.14.1.1.31 integer read-only
is Port 3 partitioned ? Enumeration: 'notPartitioned': 2, 'partitioned': 1.
                                                     metro1500EthernetHubPortLinkStatus3 1.3.6.1.4.1.2544.1.3.14.1.1.32 integer read-only
does Port 3 receive Link Pulses ? Enumeration: 'linked': 1, 'notLinked': 2.
                                                     metro1500EthernetHubPortPolarity3 1.3.6.1.4.1.2544.1.3.14.1.1.33 integer read-only
polarity of input signal at Port 3 Enumeration: 'positive': 1, 'negative': 2.
                                                     metro1500EthernetHubPortEnable4 1.3.6.1.4.1.2544.1.3.14.1.1.40 integer read-only
is Hub Port 4 enabled ? Enumeration: 'enable': 1, 'disable': 2.
                                                     metro1500EthernetHubPortPartitionStatus4 1.3.6.1.4.1.2544.1.3.14.1.1.41 integer read-only
is Port 4 partitioned ? Enumeration: 'notPartitioned': 2, 'partitioned': 1.
                                                     metro1500EthernetHubPortLinkStatus4 1.3.6.1.4.1.2544.1.3.14.1.1.42 integer read-only
does Port 4 receive Link Pulses ? Enumeration: 'linked': 1, 'notLinked': 2.
                                                     metro1500EthernetHubPortPolarity4 1.3.6.1.4.1.2544.1.3.14.1.1.43 integer read-only
polarity of input signal at Port 4 Enumeration: 'positive': 1, 'negative': 2.
                                                     metro1500EthernetHubPortEnable5 1.3.6.1.4.1.2544.1.3.14.1.1.50 integer read-only
is Hub Port 5 enabled ? Enumeration: 'enable': 1, 'disable': 2.
                                                     metro1500EthernetHubPortPartitionStatus5 1.3.6.1.4.1.2544.1.3.14.1.1.51 integer read-only
is Port 5 partitioned ? Enumeration: 'notPartitioned': 2, 'partitioned': 1.
                                                     metro1500EthernetHubPortLinkStatus5 1.3.6.1.4.1.2544.1.3.14.1.1.52 integer read-only
does Port 5 receive Link Pulses ? Enumeration: 'linked': 1, 'notLinked': 2.
                                                     metro1500EthernetHubPortPolarity5 1.3.6.1.4.1.2544.1.3.14.1.1.53 integer read-only
polarity of input signal at Port 5 Enumeration: 'positive': 1, 'negative': 2.
                                       metro1500TDM 1.3.6.1.4.1.2544.1.3.15
                                             metro1500TDMTable 1.3.6.1.4.1.2544.1.3.15.1 no-access
Table of installed FSP-II TDM Cards
                                                 metro1500TDMEntry 1.3.6.1.4.1.2544.1.3.15.1.1 no-access
Installed FSP-II TDM Cards
                                                     metro1500TDMNumber 1.3.6.1.4.1.2544.1.3.15.1.1.1 integer read-only
Slot Number of installed TDM Card
                                                     metro1500TDMRxRem 1.3.6.1.4.1.2544.1.3.15.1.1.4 integer read-only
Does the remote receiver receive Light (on) or not (off)? Enumeration: 'on': 1, 'off': 2.
                                                     metro1500TDMRxSync 1.3.6.1.4.1.2544.1.3.15.1.1.5 integer read-only
Is the input signal synchronized with the corresponding TDM card? Enumeration: 'sync': 1, 'noSync': 2.
                                                     metro1500TDMTxRem 1.3.6.1.4.1.2544.1.3.15.1.1.6 integer read-only
State of the Remote Transmitter Enumeration: 'alwaysOn': 3, 'on': 1, 'off': 2, 'alwaysOff': 4.
                                                     metro1500TDMTxRemC 1.3.6.1.4.1.2544.1.3.15.1.1.7 integer read-only
Current of the remote Transmitter in mA
                                                     metro1500TDMTxRemTemp 1.3.6.1.4.1.2544.1.3.15.1.1.8 integer read-only
Temperature of the remote Transmitter in Celsius
                                                     metro1500TDMLocLoop 1.3.6.1.4.1.2544.1.3.15.1.1.9 integer read-only
Loop for all Local Inputs enabled (on) or disabled (off) Enumeration: 'on': 1, 'off': 2.
                                                     metro1500TDMLocModuleInst1 1.3.6.1.4.1.2544.1.3.15.1.1.20 integer read-only
is local Module 1 installed ? Enumeration: 'notInstalled': 2, 'installed': 1.
                                                     metro1500TDMLocModuleEnable1 1.3.6.1.4.1.2544.1.3.15.1.1.21 integer read-only
is local Module 1 enabled ? Enumeration: 'notEnabled': 2, 'enabled': 1.
                                                     metro1500TDMLocModuleRx1 1.3.6.1.4.1.2544.1.3.15.1.1.22 integer read-only
local receiver 1 gets signal (on) Enumeration: 'on': 1, 'off': 2.
                                                     metro1500TDMLocModuleTx1 1.3.6.1.4.1.2544.1.3.15.1.1.23 integer read-only
state of the local transmitter Enumeration: 'alwaysOn': 3, 'on': 1, 'off': 2, 'alwaysOff': 4.
                                                     metro1500TDMLocModuleRemoteData1 1.3.6.1.4.1.2544.1.3.15.1.1.24 integer read-only
receiving data for this module from the remote side Enumeration: 'noData': 2, 'data': 1.
                                                     metro1500TDMLocModuleClockFrequency1 1.3.6.1.4.1.2544.1.3.15.1.1.25 integer read-only
data rate of the clock installed on local Module 1 in MBit/s
                                                     metro1500TDMLocModuleClockError1 1.3.6.1.4.1.2544.1.3.15.1.1.26 integer read-only
data rate and clock frequency are not synchronized Enumeration: 'noError': 2, 'error': 1.
                                                     metro1500TDMLocModuleInst2 1.3.6.1.4.1.2544.1.3.15.1.1.30 integer read-only
is local Module 2 installed ? Enumeration: 'notInstalled': 2, 'installed': 1.
                                                     metro1500TDMLocModuleEnable2 1.3.6.1.4.1.2544.1.3.15.1.1.31 integer read-only
is local Module 2 enabled ? Enumeration: 'notEnabled': 2, 'enabled': 1.
                                                     metro1500TDMLocModuleRx2 1.3.6.1.4.1.2544.1.3.15.1.1.32 integer read-only
local receiver 2 gets signal (on) Enumeration: 'on': 1, 'off': 2.
                                                     metro1500TDMLocModuleTx2 1.3.6.1.4.1.2544.1.3.15.1.1.33 integer read-only
state of the local transmitter Enumeration: 'alwaysOn': 3, 'on': 1, 'off': 2, 'alwaysOff': 4.
                                                     metro1500TDMLocModuleRemoteData2 1.3.6.1.4.1.2544.1.3.15.1.1.34 integer read-only
receiving data for this module from the remote side Enumeration: 'noData': 2, 'data': 1.
                                                     metro1500TDMLocModuleClockFrequency2 1.3.6.1.4.1.2544.1.3.15.1.1.35 integer read-only
data rate of the clock installed on local Module 2 in MBit/s
                                                     metro1500TDMLocModuleClockError2 1.3.6.1.4.1.2544.1.3.15.1.1.36 integer read-only
data rate and clock frequency are not synchronized Enumeration: 'noError': 2, 'error': 1.
                                                     metro1500TDMLocModuleInst3 1.3.6.1.4.1.2544.1.3.15.1.1.40 integer read-only
is local Module 3 installed ? Enumeration: 'notInstalled': 2, 'installed': 1.
                                                     metro1500TDMLocModuleEnable3 1.3.6.1.4.1.2544.1.3.15.1.1.41 integer read-only
is local Module 3 enabled ? Enumeration: 'notEnabled': 2, 'enabled': 1.
                                                     metro1500TDMLocModuleRx3 1.3.6.1.4.1.2544.1.3.15.1.1.42 integer read-only
local receiver 3 gets signal (on) Enumeration: 'on': 1, 'off': 2.
                                                     metro1500TDMLocModuleTx3 1.3.6.1.4.1.2544.1.3.15.1.1.43 integer read-only
state of the local transmitter Enumeration: 'alwaysOn': 3, 'on': 1, 'off': 2, 'alwaysOff': 4.
                                                     metro1500TDMLocModuleRemoteData3 1.3.6.1.4.1.2544.1.3.15.1.1.44 integer read-only
receiving data for this module from the remote side Enumeration: 'noData': 2, 'data': 1.
                                                     metro1500TDMLocModuleClockFrequency3 1.3.6.1.4.1.2544.1.3.15.1.1.45 integer read-only
data rate of the clock installed on local Module 3 in MBit/s
                                                     metro1500TDMLocModuleClockError3 1.3.6.1.4.1.2544.1.3.15.1.1.46 integer read-only
data rate and clock frequency are not synchronized Enumeration: 'noError': 2, 'error': 1.
                                                     metro1500TDMLocModuleInst4 1.3.6.1.4.1.2544.1.3.15.1.1.50 integer read-only
is local Module 4 installed ? Enumeration: 'notInstalled': 2, 'installed': 1.
                                                     metro1500TDMLocModuleEnable4 1.3.6.1.4.1.2544.1.3.15.1.1.51 integer read-only
is local Module 4 enabled ? Enumeration: 'notEnabled': 2, 'enabled': 1.
                                                     metro1500TDMLocModuleRx4 1.3.6.1.4.1.2544.1.3.15.1.1.52 integer read-only
local receiver 4 gets signal (on) Enumeration: 'on': 1, 'off': 2.
                                                     metro1500TDMLocModuleTx4 1.3.6.1.4.1.2544.1.3.15.1.1.53 integer read-only
state of the local transmitter Enumeration: 'alwaysOn': 3, 'on': 1, 'off': 2, 'alwaysOff': 4.
                                                     metro1500TDMLocModuleRemoteData4 1.3.6.1.4.1.2544.1.3.15.1.1.54 integer read-only
receiving data for this module from the remote side Enumeration: 'noData': 2, 'data': 1.
                                                     metro1500TDMLocModuleClockFrequency4 1.3.6.1.4.1.2544.1.3.15.1.1.55 integer read-only
data rate of the clock installed on local Module 4 in MBit/s
                                                     metro1500TDMLocModuleClockError4 1.3.6.1.4.1.2544.1.3.15.1.1.56 integer read-only
data rate and clock frequency are not synchronized Enumeration: 'noError': 2, 'error': 1.
                                       metro1500Trap 1.3.6.1.4.1.2544.1.3.100
                                                 metro1500HardwareAdded 1.3.6.1.4.1.2544.1.3.1000.1
Trap is sent when a new Module is inserted into the FSP-I Box
                                                 metro1500HardwareDeleted 1.3.6.1.4.1.2544.1.3.1000.2
Trap is sent when a Module is removed from the FSP-I Box
                                                 metro1500PSNotFail 1.3.6.1.4.1.2544.1.3.1000.3
Trap is sent when a Power Supply starts working
                                                 metro1500PSFail 1.3.6.1.4.1.2544.1.3.1000.4
Trap is sent when a Power Supply fails
                                                 metro1500FanNotFail 1.3.6.1.4.1.2544.1.3.1000.5
Trap is sent when a Fan starts working
                                                 metro1500FanFail 1.3.6.1.4.1.2544.1.3.1000.6
Trap is sent when a Fan fails
                                                 metro1500BusNotFail 1.3.6.1.4.1.2544.1.3.1000.7
Trap is sent when the internal Bus starts working again
                                                 metro1500BusFail 1.3.6.1.4.1.2544.1.3.1000.8
Trap is sent when an internal Bus Failure occurs
                                                 metro1500RxLocOn 1.3.6.1.4.1.2544.1.3.1000.20
Trap is sent when the local Receiver gets Signal
                                                 metro1500RxLocOff 1.3.6.1.4.1.2544.1.3.1000.21
Trap is sent when the local Receiver has Loss of Signal
                                                 metro1500TxLocOn 1.3.6.1.4.1.2544.1.3.1000.22
Trap is sent when the local Transmitter is switched on, Either this trap or Trap #20 should be disabled in the Configuration because they are typically sent at the same Time.
                                                 metro1500TxLocOff 1.3.6.1.4.1.2544.1.3.1000.23
Trap is sent when the local Transmitter is switched off, Either this trap or Trap #21 should be disabled in the Configuration because they are typically sent at the same Time.
                                                 metro1500RxRemOn 1.3.6.1.4.1.2544.1.3.1000.24
Trap is sent when the remote Receiver gets Signal
                                                 metro1500RxRemOff 1.3.6.1.4.1.2544.1.3.1000.25
Trap is sent when the remote Receiver has Loss of Signal
                                                 metro1500TxRemOn 1.3.6.1.4.1.2544.1.3.1000.26
Trap is sent when the remote Transmitter is switched on, Either this trap or Trap #24 should be disabled in the Configuration because they are typically sent at the same Time.
                                                 metro1500TxRemOff 1.3.6.1.4.1.2544.1.3.1000.27
Trap is sent when the remote Transmitter is switched off, Either this trap or Trap #25 should be disabled in the Configuration because they are typically sent at the same Time.
                                                 metro1500RxRem2On 1.3.6.1.4.1.2544.1.3.1000.28
Trap is sent when the 2nd remote Receiver gets Signal. This Trap is only sent if there is a 2nd remote Receiver.
                                                 metro1500RxRem2Off 1.3.6.1.4.1.2544.1.3.1000.29
Trap is sent when the 2nd remote Receiver has Loss of Signal. This Trap is only sent if there is a 2nd remote Receiver.
                                                 metro1500TxRem2On 1.3.6.1.4.1.2544.1.3.1000.30
Trap is sent when the 2nd remote Transmitter is switched on, Either this Trap or Trap #28 should be disabled in the Configuration because they are typically sent at the same Time. This Trap is only sent if there is a 2nd remote Receiver.
                                                 metro1500TxRem2Off 1.3.6.1.4.1.2544.1.3.1000.31
Trap is sent when the 2nd remote Transmitter is switched off, Either this trap or Trap #29 should be disabled in the Configuration because they are typically sent at the same Time.
                                                 metro1500ClockNoFail 1.3.6.1.4.1.2544.1.3.1000.32
Trap is sent if a Clock is installed and can synchronize with the input Signal. This Trap is not sent if the installed Clock does not have an error Output
                                                 metro1500ClockFail 1.3.6.1.4.1.2544.1.3.1000.33
Trap is sent if a Clock is installed and can not synchronize with the input Signal. This trap is not sent if the installed Clock does not have an error Output
                                                 metro1500ClockChangeFrequency 1.3.6.1.4.1.2544.1.3.1000.34
Trap is sent if a multi frequency Clock is installed and changes its frequency.
                                                 metro1500LocLoopOn 1.3.6.1.4.1.2544.1.3.1000.35
Trap is sent if Local Loop is set to On.
                                                 metro1500LocLoopOff 1.3.6.1.4.1.2544.1.3.1000.36
Trap is sent if Local Loop is set to Off.
                                                 metro1500RemLoopOn 1.3.6.1.4.1.2544.1.3.1000.37
Trap is sent if Remote Loop is set to On.
                                                 metro1500RemLoopOff 1.3.6.1.4.1.2544.1.3.1000.38
Trap is sent if Remote Loop is set to Off.
                                                 metro1500switchReferenceLaserOn 1.3.6.1.4.1.2544.1.3.1000.40
Trap is sent when the Reference Laser is switched on
                                                 metro1500switchReferenceLaserOff 1.3.6.1.4.1.2544.1.3.1000.41
Trap is sent when the Reference Laser is switched off
                                                 metro1500switchToA 1.3.6.1.4.1.2544.1.3.1000.42
Trap is sent when the Switch switches to Line A
                                                 metro1500switchToB 1.3.6.1.4.1.2544.1.3.1000.43
Trap is sent when the Switch switches to Line B
                                                 metro1500switchAutomatic 1.3.6.1.4.1.2544.1.3.1000.44
Trap is sent when the Switch is going to Automatic State
                                                 metro1500switchLocked 1.3.6.1.4.1.2544.1.3.1000.45
Trap is sent when the Switch is going to Locked State
                                                 metro1500switchLineAavail 1.3.6.1.4.1.2544.1.3.1000.46
Trap is sent when the Switch Line A is available
                                                 metro1500switchLineANotAvail 1.3.6.1.4.1.2544.1.3.1000.47
Trap is sent when the Switch Line A is not available
                                                 metro1500switchLineBavail 1.3.6.1.4.1.2544.1.3.1000.48
Trap is sent when the Switch Line B is available
                                                 metro1500switchLineBNotAvail 1.3.6.1.4.1.2544.1.3.1000.49
Trap is sent when the Switch Line B is not available
                                                 metro1500repeatedMessage 1.3.6.1.4.1.2544.1.3.1000.50
Trap is sent, after three times the same trap is sent (instead of the fourth one). The original trap is suppressed for one minute.
                                                 metro1500INNCDown 1.3.6.1.4.1.2544.1.3.1000.51
Trap is sent, when the Inter NEMI Network Connection (INNC) is down.
                                                 metro1500INNCUp 1.3.6.1.4.1.2544.1.3.1000.52
Trap is sent, when the Inter NEMI Network Connection (INNC) is up.
                                                 metro1500EthernetHubPortEnable 1.3.6.1.4.1.2544.1.3.1000.60
Trap is sent, when one of the ports of the Ethernet Hub is enabled by the management software (default). Use SNMP Get to get the Port Number.
                                                 metro1500EthernetHubPortDisable 1.3.6.1.4.1.2544.1.3.1000.61
Trap is sent, when one of the ports of the Ethernet Hub is disabled by the management Software. Use SNMP Get to get the Port number.
                                                 metro1500EthernetHubPortPartitioned 1.3.6.1.4.1.2544.1.3.1000.62
Trap is sent, when a Hub Port is disabled by the Hub Hardware. Use SNMP Get to get the Port Number.
                                                 metro1500EthernetHubPortNotPartitioned 1.3.6.1.4.1.2544.1.3.1000.63
Trap is sent, when a Hub Port is enabled by the Hub Hardware (default). Use SNMP Get to get the Port Number.
                                                 metro1500EthernetHubPortLinkPulses 1.3.6.1.4.1.2544.1.3.1000.64
Trap is sent, when a Hub Port starts receiving Link Pulses. Use SNMP Get to get the Port Number
                                                 metro1500EthernetHubPortNoLinkPulses 1.3.6.1.4.1.2544.1.3.1000.65
Trap is sent, when a Hub Port stops receiving Link Pulses. Use SNMP Get to get the Port Number
                                                 metro1500TDMRemoteSyncLoss 1.3.6.1.4.1.2544.1.3.1000.70
Trap is sent, when the synchronisation of the incoming remote data stream is lost
                                                 metro1500TDMRemoteSync 1.3.6.1.4.1.2544.1.3.1000.71
Trap is sent, when the synchronisation of the incoming remote data stream is established
                                                 metro1500TDMLocModuleEnabled1 1.3.6.1.4.1.2544.1.3.1000.72
Trap is sent, when local module 1 is enabled by software
                                                 metro1500TDMLocModuleDisable1 1.3.6.1.4.1.2544.1.3.1000.73
Trap is sent, when local module 1 is disabled by software
                                                 metro1500TDMLocModuleEnabled2 1.3.6.1.4.1.2544.1.3.1000.74
Trap is sent, when local module 2 is enabled by software
                                                 metro1500TDMLocModuleDisable2 1.3.6.1.4.1.2544.1.3.1000.75
Trap is sent, when local module 2 is disabled by software
                                                 metro1500TDMLocModuleEnabled3 1.3.6.1.4.1.2544.1.3.1000.76
Trap is sent, when local module 3 is enabled by software
                                                 metro1500TDMLocModuleDisable3 1.3.6.1.4.1.2544.1.3.1000.77
Trap is sent, when local module 3 is disabled by software
                                                 metro1500TDMLocModuleEnabled4 1.3.6.1.4.1.2544.1.3.1000.78
Trap is sent, when local module 4 is enabled by software
                                                 metro1500TDMLocModuleDisable4 1.3.6.1.4.1.2544.1.3.1000.79
Trap is sent, when local module 4 is disabled by software
                                                 metro1500TDMLocModuleRxOn1 1.3.6.1.4.1.2544.1.3.1000.88
Trap is sent, when the local receiver 1 of a TDM card gets modulated signal
                                                 metro1500TDMLocModuleRxOff1 1.3.6.1.4.1.2544.1.3.1000.89
Trap is sent, when the local receiver 1 of a TDM card doesn't get modulated signal
                                                 metro1500TDMLocModuleRxOn2 1.3.6.1.4.1.2544.1.3.1000.90
Trap is sent, when the local receiver 2 of a TDM card gets modulated signal
                                                 metro1500TDMLocModuleRxOff2 1.3.6.1.4.1.2544.1.3.1000.91
Trap is sent, when the local receiver 2 of a TDM card doesn't get modulated signal
                                                 metro1500TDMLocModuleRxOn3 1.3.6.1.4.1.2544.1.3.1000.92
Trap is sent, when the local receiver 3 of a TDM card gets modulated signal
                                                 metro1500TDMLocModuleRxOff3 1.3.6.1.4.1.2544.1.3.1000.93
Trap is sent, when the local receiver 3 of a TDM card doesn't get modulated signal
                                                 metro1500TDMLocModuleRxOn4 1.3.6.1.4.1.2544.1.3.1000.94
Trap is sent, when the local receiver 4 of a TDM card gets modulated signal
                                                 metro1500TDMLocModuleRxOff4 1.3.6.1.4.1.2544.1.3.1000.95
Trap is sent, when the local receiver 4 of a TDM card doesn't get modulated signal
                                                 metro1500TDMLocModuleData1 1.3.6.1.4.1.2544.1.3.1000.104
Trap is sent, when data from the remote side is available for this TDM channel
                                                 metro1500TDMLocModuleNoData1 1.3.6.1.4.1.2544.1.3.1000.105
Trap is sent, when no data from the remote side is available for this TDM channel
                                                 metro1500TDMLocModuleData2 1.3.6.1.4.1.2544.1.3.1000.106
Trap is sent, when data from the remote side is available for this TDM channel
                                                 metro1500TDMLocModuleNoData2 1.3.6.1.4.1.2544.1.3.1000.107
Trap is sent, when no data from the remote side is available for this TDM channel
                                                 metro1500TDMLocModuleData3 1.3.6.1.4.1.2544.1.3.1000.108
Trap is sent, when data from the remote side is available for this TDM channel
                                                 metro1500TDMLocModuleNoData3 1.3.6.1.4.1.2544.1.3.1000.109
Trap is sent, when no data from the remote side is available for this TDM channel
                                                 metro1500TDMLocModuleData4 1.3.6.1.4.1.2544.1.3.1000.110
Trap is sent, when data from the remote side is available for this TDM channel
                                                 metro1500TDMLocModuleNoData4 1.3.6.1.4.1.2544.1.3.1000.111
Trap is sent, when no data from the remote side is available for this TDM channel
                                                 metro1500TDMLocModuleClockFail1 1.3.6.1.4.1.2544.1.3.1000.120
Trap is sent, when the Data Rate of the local input signal doesn't match the Data Rate of the local clock
                                                 metro1500TDMLocModuleClockNoFail1 1.3.6.1.4.1.2544.1.3.1000.121
Trap is sent, when the Data Rate of the local input signal matches the Data Rate of the local clock
                                                 metro1500TDMLocModuleClockFail2 1.3.6.1.4.1.2544.1.3.1000.122
Trap is sent, when the Data Rate of the local input signal doesn't match the Data Rate of the local clock
                                                 metro1500TDMLocModuleClockNoFail2 1.3.6.1.4.1.2544.1.3.1000.123
Trap is sent, when the Data Rate of the local input signal matches the Data Rate of the local clock
                                                 metro1500TDMLocModuleClockFail3 1.3.6.1.4.1.2544.1.3.1000.124
Trap is sent, when the Data Rate of the local input signal doesn't match the Data Rate of the local clock
                                                 metro1500TDMLocModuleClockNoFail3 1.3.6.1.4.1.2544.1.3.1000.125
Trap is sent, when the Data Rate of the local input signal matches the Data Rate of the local clock
                                                 metro1500TDMLocModuleClockFail4 1.3.6.1.4.1.2544.1.3.1000.126
Trap is sent, when the Data Rate of the local input signal doesn't match the Data Rate of the local clock
                                                 metro1500TDMLocModuleClockNoFail4 1.3.6.1.4.1.2544.1.3.1000.127
Trap is sent, when the Data Rate of the local input signal matches the Data Rate of the local clock