MELLANOX-IF-VPI-MIB: View SNMP OID List / Download MIB

VENDOR: MELLANOX TECHNOLOGIES


 Home MIB: MELLANOX-IF-VPI-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, MELLANOX-SMI-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 mellanoxIfVPIMib 1.3.6.1.4.1.33049.3.1
Mellanox VPI Interface MIB
     mellanoxIfVPITable 1.3.6.1.4.1.33049.3.1.1 no-access
         mellanoxIfVPIEntry 1.3.6.1.4.1.33049.3.1.1.1 no-access
             mellanoxIfVPIIndex 1.3.6.1.4.1.33049.3.1.1.1.1 integer32 read-only
The index of this table (taken from System II ifIndex)
             mellanoxIfVPIIbPortPhysicalState 1.3.6.1.4.1.33049.3.1.1.1.2 integer read-only
Infiniband Port physical state Enumeration: 'disabled': 3, 'sleep': 1, 'noStateChange': 0, 'polling': 2, 'notAvailable': 100, 'linkUp': 5, 'linkErrorRecovery': 6, 'phyTest': 7, 'portConfigurationTraining': 4.
             mellanoxIfVPIIbPortLogicalState 1.3.6.1.4.1.33049.3.1.1.1.3 integer read-only
Infiniband Port logical state Enumeration: 'noState': 0, 'down': 1, 'notAvailable': 100, 'initialize': 2, 'armed': 3, 'active': 4.
             mellanoxIfVPIIbPortGuid 1.3.6.1.4.1.33049.3.1.1.1.4 displaystring read-only
Infiniband PortGuid (64 bits length) - Value shall differ for each end port on a CA or router , but the same for all ports of a switch.
             mellanoxIfVPIPortXmitWait 1.3.6.1.4.1.33049.3.1.1.1.5 counter64 read-only
A VPI counter. The number of ticks during which the port selected by PortSelect had data to transmit but no data was sent during the entire tick either because of insufficient credits or because of lack of arbitration.
             mellanoxIfVPISymbolErrorCounter 1.3.6.1.4.1.33049.3.1.1.1.6 counter64 read-only
A VPI counter Total number of minor link errors detected on one or more physical lanes.
             mellanoxIfVPIPortAdminSpeed 1.3.6.1.4.1.33049.3.1.1.1.7 gauge32 read-only
The interface's configured bandwidth in units of 1,000,000 bits per second. This value is represented in a similar way to the ifHighSpeed column in IF-MIB.
             mellanoxIfVPISubnetName 1.3.6.1.4.1.33049.3.1.1.1.8 displaystring read-only
This field will only be used in IB router systems. For mapped IB ports, this field will display the name of the subnet the port is mapped to. For L3 IB interfaces: the name assigned to them. In other cases: An empty string will be displayed
             mellanoxIfVPISubnetPrefix 1.3.6.1.4.1.33049.3.1.1.1.9 displaystring read-only
This field will only be used in IB systems. For L2 IB ports: the prefix of the subnet the port is mapped to. For L3 IB interfaces: the prefix assigned to them. In other cases: An empty string will be displayed.
             mellanoxIfVPIIbLocalIdentifier 1.3.6.1.4.1.33049.3.1.1.1.10 integer32 read-only
This field will only be used in L3 interfaces on IB router systems. For L3 IB interfaces, this field will display the local identifier (lid) of the subnet. In other cases: 0 will be displayed.
             mellanoxIfVPI64bytePkts 1.3.6.1.4.1.33049.3.1.1.1.11 counter64 read-only
Total number of packets with a length of 64 bytes.
             mellanoxIfVPI65to127bytePkts 1.3.6.1.4.1.33049.3.1.1.1.12 counter64 read-only
Total number of packets with a length between 65 and 127 bytes.
             mellanoxIfVPI128to255bytePkts 1.3.6.1.4.1.33049.3.1.1.1.13 counter64 read-only
Total number of packets with a length between 128 and 255 bytes.
             mellanoxIfVPI256to511bytePkts 1.3.6.1.4.1.33049.3.1.1.1.14 counter64 read-only
Total number of packets with a length between 256 and 511 bytes.
             mellanoxIfVPI512to1023bytePkts 1.3.6.1.4.1.33049.3.1.1.1.15 counter64 read-only
Total number of packets with a length between 512 and 1023 bytes.
             mellanoxIfVPI1024to1518bytePkts 1.3.6.1.4.1.33049.3.1.1.1.16 counter64 read-only
Total number of packets with a length between 1024 and 1518 bytes.
             mellanoxIfVPIJumboPkts 1.3.6.1.4.1.33049.3.1.1.1.17 counter64 read-only
Total number of Jumbo-sized packets (bigger than 1518 bytes).
             mellanoxIfVPIUndersizedPkts 1.3.6.1.4.1.33049.3.1.1.1.18 counter64 read-only
Total number of undersized packets (smaller than 64 bytes).
             mellanoxIfVPIOversizedPkts 1.3.6.1.4.1.33049.3.1.1.1.19 counter64 read-only
Total number of oversized packets (bigger than 9216 bytes).
             mellanoxIfVPIUnknownControlOpcode 1.3.6.1.4.1.33049.3.1.1.1.20 counter64 read-only
Total number of unknown control opcodes.
             mellanoxIfVPIFCSErrors 1.3.6.1.4.1.33049.3.1.1.1.21 counter64 read-only
Total number of Frame Check Sequence errors.