ME1200-SYNCE-MIB: View SNMP OID List / Download MIB

VENDOR: CISCO


 Home MIB: ME1200-SYNCE-MIB
Download as:   
SNMPv2-CONF, CISCOME1200-MIB, SNMPv2-SMI, ME1200-TC, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 me1200SynceMib 1.3.6.1.4.1.9.9.815.1.42
Private SyncE MIB.
       me1200SynceMibObjects 1.3.6.1.4.1.9.9.815.1.42.1
           me1200SynceCapabilities 1.3.6.1.4.1.9.9.815.1.42.1.1
               me1200SynceCapabilitiesGlobal 1.3.6.1.4.1.9.9.815.1.42.1.1.1
                   me1200SynceCapabilitiesGlobalSourceCount 1.3.6.1.4.1.9.9.815.1.42.1.1.1.1 unsigned32 read-only
The number of SyncE sources supported by the device.
           me1200SynceConfig 1.3.6.1.4.1.9.9.815.1.42.1.2
               me1200SynceConfigGlobal 1.3.6.1.4.1.9.9.815.1.42.1.2.1
                   me1200SynceConfigGlobalClockSelectionMode 1.3.6.1.4.1.9.9.815.1.42.1.2.1.1
                       me1200SynceConfigGlobalClockSelectionModeSelectionMode 1.3.6.1.4.1.9.9.815.1.42.1.2.1.1.1 me1200synceselectionmode read-write
The selection mode.
                       me1200SynceConfigGlobalClockSelectionModeSource 1.3.6.1.4.1.9.9.815.1.42.1.2.1.1.2 unsigned32 read-write
Nominated source for manuel selection mode.
                       me1200SynceConfigGlobalClockSelectionModeWtrTime 1.3.6.1.4.1.9.9.815.1.42.1.2.1.1.3 unsigned32 read-write
WTR timer value in minutes. Range is 0 to 12 minutes where 0 means that the timer is disabled.
                       me1200SynceConfigGlobalClockSelectionModeSsmHoldover 1.3.6.1.4.1.9.9.815.1.42.1.2.1.1.4 me1200syncequalitylevel read-write
Tx overwrite SSM used when clock controller is hold over.
                       me1200SynceConfigGlobalClockSelectionModeSsmFreerun 1.3.6.1.4.1.9.9.815.1.42.1.2.1.1.5 me1200syncequalitylevel read-write
Tx overwrite SSM used when clock controller is free run.
                       me1200SynceConfigGlobalClockSelectionModeEecOption 1.3.6.1.4.1.9.9.815.1.42.1.2.1.1.6 me1200synceeecoption read-write
Synchronous Ethernet Equipment Clock option.
                   me1200SynceConfigGlobalStationClocks 1.3.6.1.4.1.9.9.815.1.42.1.2.1.2
                       me1200SynceConfigGlobalStationClocksStationClkOut 1.3.6.1.4.1.9.9.815.1.42.1.2.1.2.1 me1200syncefrequency read-write
Station clock output frequency setting.
                       me1200SynceConfigGlobalStationClocksStationClkIn 1.3.6.1.4.1.9.9.815.1.42.1.2.1.2.2 me1200syncefrequency read-write
Station clock input frequency setting.
               me1200SynceConfigSources 1.3.6.1.4.1.9.9.815.1.42.1.2.2
                   me1200SynceConfigSourcesClockSourceNominationTable 1.3.6.1.4.1.9.9.815.1.42.1.2.2.1 no-access
This is the SyncE source nomination configuration.
                       me1200SynceConfigSourcesClockSourceNominationEntry 1.3.6.1.4.1.9.9.815.1.42.1.2.2.1.1 no-access
The sourceId index must be a value from 0 up to the number of sources minus one.
                           me1200SynceConfigSourcesClockSourceNominationSourceId 1.3.6.1.4.1.9.9.815.1.42.1.2.2.1.1.1 integer32 no-access
-
                           me1200SynceConfigSourcesClockSourceNominationNominated 1.3.6.1.4.1.9.9.815.1.42.1.2.2.1.1.2 truthvalue read-write
Indicates if source is nominated.
                           me1200SynceConfigSourcesClockSourceNominationNetworkPort 1.3.6.1.4.1.9.9.815.1.42.1.2.2.1.1.3 me1200interfaceindex read-write
Interface index of the norminated source.
                           me1200SynceConfigSourcesClockSourceNominationClkInPort 1.3.6.1.4.1.9.9.815.1.42.1.2.2.1.1.4 me1200unsigned8 read-write
Clock input of the norminated source.
                           me1200SynceConfigSourcesClockSourceNominationPriority 1.3.6.1.4.1.9.9.815.1.42.1.2.2.1.1.5 unsigned32 read-write
Priority of the nominated source.
                           me1200SynceConfigSourcesClockSourceNominationAnegMode 1.3.6.1.4.1.9.9.815.1.42.1.2.2.1.1.6 me1200synceanegmode read-write
Autonogotiation mode auto-master-slave.
                           me1200SynceConfigSourcesClockSourceNominationSsmOverwrite 1.3.6.1.4.1.9.9.815.1.42.1.2.2.1.1.7 me1200syncequalitylevel read-write
SSM overwrite quality.
                           me1200SynceConfigSourcesClockSourceNominationHoldoffTime 1.3.6.1.4.1.9.9.815.1.42.1.2.2.1.1.8 unsigned32 read-write
Hold Off timer value in 100ms (3 - 18). Zero means no hold off.
               me1200SynceConfigPorts 1.3.6.1.4.1.9.9.815.1.42.1.2.3
                   me1200SynceConfigPortsPortConfigTable 1.3.6.1.4.1.9.9.815.1.42.1.2.3.1 no-access
This is the SyncE port configuration.
                       me1200SynceConfigPortsPortConfigEntry 1.3.6.1.4.1.9.9.815.1.42.1.2.3.1.1 no-access
The portId index must be a value from 0 up to the number of ports minus one.
                           me1200SynceConfigPortsPortConfigPortId 1.3.6.1.4.1.9.9.815.1.42.1.2.3.1.1.1 me1200interfaceindex no-access
-
                           me1200SynceConfigPortsPortConfigSsmEnabled 1.3.6.1.4.1.9.9.815.1.42.1.2.3.1.1.2 truthvalue read-write
Quality level via SSM enabled.
           me1200SynceStatus 1.3.6.1.4.1.9.9.815.1.42.1.3
               me1200SynceStatusGlobal 1.3.6.1.4.1.9.9.815.1.42.1.3.1
                   me1200SynceStatusGlobalClockSelectionMode 1.3.6.1.4.1.9.9.815.1.42.1.3.1.1
                       me1200SynceStatusGlobalClockSelectionModeClockInput 1.3.6.1.4.1.9.9.815.1.42.1.3.1.1.1 unsigned32 read-only
The clock source locked to when clock selector is in locked state.
                       me1200SynceStatusGlobalClockSelectionModeSelectorState 1.3.6.1.4.1.9.9.815.1.42.1.3.1.1.2 me1200synceselectorstate read-only
This is indicating the state of the clock selector.
                       me1200SynceStatusGlobalClockSelectionModeLosx 1.3.6.1.4.1.9.9.815.1.42.1.3.1.1.3 truthvalue read-only
LOSX
                       me1200SynceStatusGlobalClockSelectionModeLol 1.3.6.1.4.1.9.9.815.1.42.1.3.1.1.4 truthvalue read-only
Clock selector has raised the Los Of Lock alarm.
                       me1200SynceStatusGlobalClockSelectionModeDhold 1.3.6.1.4.1.9.9.815.1.42.1.3.1.1.5 truthvalue read-only
Clock selector has not yet calculated the holdover frequency offset to local oscillator.
               me1200SynceStatusSources 1.3.6.1.4.1.9.9.815.1.42.1.3.2
                   me1200SynceStatusSourcesClockSourceNominationTable 1.3.6.1.4.1.9.9.815.1.42.1.3.2.1 no-access
This is the clock source nomination status.
                       me1200SynceStatusSourcesClockSourceNominationEntry 1.3.6.1.4.1.9.9.815.1.42.1.3.2.1.1 no-access
The sourceId index must be a value must be a value from 0 up to the number of sources minus one.
                           me1200SynceStatusSourcesClockSourceNominationSourceId 1.3.6.1.4.1.9.9.815.1.42.1.3.2.1.1.1 integer32 no-access
-
                           me1200SynceStatusSourcesClockSourceNominationLocs 1.3.6.1.4.1.9.9.815.1.42.1.3.2.1.1.2 truthvalue read-only
LOCS
                           me1200SynceStatusSourcesClockSourceNominationFos 1.3.6.1.4.1.9.9.815.1.42.1.3.2.1.1.3 truthvalue read-only
FOS
                           me1200SynceStatusSourcesClockSourceNominationSsm 1.3.6.1.4.1.9.9.815.1.42.1.3.2.1.1.4 truthvalue read-only
SSM
                           me1200SynceStatusSourcesClockSourceNominationWtr 1.3.6.1.4.1.9.9.815.1.42.1.3.2.1.1.5 truthvalue read-only
WTR
               me1200SynceStatusPorts 1.3.6.1.4.1.9.9.815.1.42.1.3.3
                   me1200SynceStatusPortsPortStatusTable 1.3.6.1.4.1.9.9.815.1.42.1.3.3.1 no-access
This is the port status.
                       me1200SynceStatusPortsPortStatusEntry 1.3.6.1.4.1.9.9.815.1.42.1.3.3.1.1 no-access
The portId index must be a value must be a value from 0 up to the number of ports minus one.
                           me1200SynceStatusPortsPortStatusPortId 1.3.6.1.4.1.9.9.815.1.42.1.3.3.1.1.1 me1200interfaceindex no-access
-
                           me1200SynceStatusPortsPortStatusSsmRx 1.3.6.1.4.1.9.9.815.1.42.1.3.3.1.1.2 me1200syncequalitylevel read-only
Monitoring of the received SSM QL on this port.
                           me1200SynceStatusPortsPortStatusSsmTx 1.3.6.1.4.1.9.9.815.1.42.1.3.3.1.1.3 me1200syncequalitylevel read-only
Monitoring of the transmitted SSM QL on this port.
                           me1200SynceStatusPortsPortStatusMaster 1.3.6.1.4.1.9.9.815.1.42.1.3.3.1.1.4 truthvalue read-only
If PHY is in 1000BaseT Mode then this is monitoring the master/slave mode.
               me1200SynceStatusPtp 1.3.6.1.4.1.9.9.815.1.42.1.3.4
                   me1200SynceStatusPtpPortStatusTable 1.3.6.1.4.1.9.9.815.1.42.1.3.4.1 no-access
This is the PTP port status.
                       me1200SynceStatusPtpPortStatusEntry 1.3.6.1.4.1.9.9.815.1.42.1.3.4.1.1 no-access
The sourceId index must be a value must be a value from 0 up to the number of PTP sources minus one.
                           me1200SynceStatusPtpPortStatusSourceId 1.3.6.1.4.1.9.9.815.1.42.1.3.4.1.1.1 integer32 no-access
-
                           me1200SynceStatusPtpPortStatusSsmRx 1.3.6.1.4.1.9.9.815.1.42.1.3.4.1.1.2 me1200syncequalitylevel read-only
Monitoring of the received SSM QL on this port.
                           me1200SynceStatusPtpPortStatusPtsf 1.3.6.1.4.1.9.9.815.1.42.1.3.4.1.1.3 me1200synceptsfstate read-only
PTSF status for PTP source.
           me1200SynceControl 1.3.6.1.4.1.9.9.815.1.42.1.4
               me1200SynceControlSources 1.3.6.1.4.1.9.9.815.1.42.1.4.1
                   me1200SynceControlSourcesClockSourceTable 1.3.6.1.4.1.9.9.815.1.42.1.4.1.1 no-access
This is the SyncE sources control structure.
                       me1200SynceControlSourcesClockSourceEntry 1.3.6.1.4.1.9.9.815.1.42.1.4.1.1.1 no-access
The sourceId index must be a value must be a value from 0 up to the number of sources minus one.
                           me1200SynceControlSourcesClockSourceSourceId 1.3.6.1.4.1.9.9.815.1.42.1.4.1.1.1.1 integer32 no-access
-
                           me1200SynceControlSourcesClockSourceClearWtr 1.3.6.1.4.1.9.9.815.1.42.1.4.1.1.1.2 me1200unsigned8 read-write
-
           me1200SynceNotificationPrefix 1.3.6.1.4.1.9.9.815.1.42.1.5
               me1200SynceNotification 1.3.6.1.4.1.9.9.815.1.42.1.5.0
                   me1200SynceNotificationClockSelectorStateChange 1.3.6.1.4.1.9.9.815.1.42.1.5.0.1
Notification is sent when the clock selector state is changed.
       me1200SynceMibConformance 1.3.6.1.4.1.9.9.815.1.42.2
           me1200SynceMibCompliances 1.3.6.1.4.1.9.9.815.1.42.2.1
               me1200SynceMibCompliance 1.3.6.1.4.1.9.9.815.1.42.2.1.1
The compliance statement for the implementation.
           me1200SynceMibGroups 1.3.6.1.4.1.9.9.815.1.42.2.2
               me1200SynceCapabilitiesGlobalInfoGroup 1.3.6.1.4.1.9.9.815.1.42.2.2.1
A collection of objects suitable for bulk operations.
               me1200SynceConfigGlobalClockSelectionModeInfoGroup 1.3.6.1.4.1.9.9.815.1.42.2.2.2
A collection of objects suitable for bulk operations.
               me1200SynceConfigGlobalStationClocksInfoGroup 1.3.6.1.4.1.9.9.815.1.42.2.2.3
A collection of objects suitable for bulk operations.
               me1200SynceConfigSourcesClockSourceNominationInfoGroup 1.3.6.1.4.1.9.9.815.1.42.2.2.4
A collection of objects suitable for bulk operations.
               me1200SynceConfigPortsPortConfigInfoGroup 1.3.6.1.4.1.9.9.815.1.42.2.2.5
A collection of objects suitable for bulk operations.
               me1200SynceStatusGlobalClockSelectionModeInfoGroup 1.3.6.1.4.1.9.9.815.1.42.2.2.6
A collection of objects suitable for bulk operations.
               me1200SynceStatusSourcesClockSourceNominationInfoGroup 1.3.6.1.4.1.9.9.815.1.42.2.2.7
A collection of objects suitable for bulk operations.
               me1200SynceStatusPortsPortStatusInfoGroup 1.3.6.1.4.1.9.9.815.1.42.2.2.8
A collection of objects suitable for bulk operations.
               me1200SynceStatusPtpPortStatusInfoGroup 1.3.6.1.4.1.9.9.815.1.42.2.2.9
A collection of objects suitable for bulk operations.
               me1200SynceControlSourcesClockSourceInfoGroup 1.3.6.1.4.1.9.9.815.1.42.2.2.10
A collection of objects suitable for bulk operations.
               me1200SynceNotificationInfoGroup 1.3.6.1.4.1.9.9.815.1.42.2.2.11
A collection of objects suitable for bulk operations.