ME1200-LLDP-MIB: View SNMP OID List / Download MIB

VENDOR: CISCO


 Home MIB: ME1200-LLDP-MIB
Download as:   
SNMPv2-CONF, CISCOME1200-MIB, SNMPv2-SMI, ME1200-TC, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 me1200LldpMib 1.3.6.1.4.1.9.9.815.1.34
This is a private version of the LLDP MIB
       me1200LldpObjects 1.3.6.1.4.1.9.9.815.1.34.1
           me1200LldpConfig 1.3.6.1.4.1.9.9.815.1.34.1.2
               me1200LldpGlobal 1.3.6.1.4.1.9.9.815.1.34.1.2.1
                   me1200LldpGlobalInitDelay 1.3.6.1.4.1.9.9.815.1.34.1.2.1.1 me1200unsigned16 read-write
Set the LLDP tx reinitialization delay in seconds. Valid range 1-10. Note: Must be less than 0.25 times the Tx interval.
                   me1200LldpGlobalMsgTxHold 1.3.6.1.4.1.9.9.815.1.34.1.2.1.2 me1200unsigned16 read-write
Set the LLDP tx hold time in seconds. Valid range 2-10.
                   me1200LldpGlobalMsgTxInterval 1.3.6.1.4.1.9.9.815.1.34.1.2.1.3 me1200unsigned16 read-write
Set the LLDP tx interval in seconds.. Valid range 5-32768.
                   me1200LldpGlobalTxDelay 1.3.6.1.4.1.9.9.815.1.34.1.2.1.4 me1200unsigned16 read-write
Set the LLDP tx delay in seconds. Valid range 1-8192. Note: Must be larger at least 4 times the size of Tx delay
               me1200LldpConfigurationTable 1.3.6.1.4.1.9.9.815.1.34.1.2.2 no-access
This is a table to configure LLDP configurations for a specific interface.
                   me1200LldpConfigurationEntry 1.3.6.1.4.1.9.9.815.1.34.1.2.2.1 no-access
Each port has a set of control parameters
                       me1200LldpConfigurationIfIndex 1.3.6.1.4.1.9.9.815.1.34.1.2.2.1.1 me1200interfaceindex no-access
Logical interface number.
                       me1200LldpConfigurationAdminState 1.3.6.1.4.1.9.9.815.1.34.1.2.2.1.3 me1200lldpadminstate read-write
Sets the LLDP admin state for the interface.
                       me1200LldpConfigurationCdpAware 1.3.6.1.4.1.9.9.815.1.34.1.2.2.1.4 truthvalue read-write
Enables/disables CDP awareness for the interface.
                       me1200LldpConfigurationOptionalTlvs 1.3.6.1.4.1.9.9.815.1.34.1.2.2.1.5 me1200unsigned8 read-write
Enables/Disables the LLDP optional TLVs. Bit mask, where setting the bit to 1 means enable the optional TLV. Bit 0 represents Port Description TLV. Bit 1 represents System Name TLV. Bit 2 represents System Description. Bit 3 represents System Capabilities TLV. Bit 4 represents Management Address TLV.
           me1200LldpStatus 1.3.6.1.4.1.9.9.815.1.34.1.3
               me1200LldpStatistics 1.3.6.1.4.1.9.9.815.1.34.1.3.2
                   me1200LldpStatisticsGlobalCounters 1.3.6.1.4.1.9.9.815.1.34.1.3.2.1
                       me1200LldpStatisticsGlobalCountersTableInserts 1.3.6.1.4.1.9.9.815.1.34.1.3.2.1.1 unsigned32 read-only
Shows the number of new entries added since switch reboot.
                       me1200LldpStatisticsGlobalCountersTableDeletes 1.3.6.1.4.1.9.9.815.1.34.1.3.2.1.2 unsigned32 read-only
Shows the number of new entries deleted since switch reboot.
                       me1200LldpStatisticsGlobalCountersTableDrops 1.3.6.1.4.1.9.9.815.1.34.1.3.2.1.3 unsigned32 read-only
Shows the number of LLDP frames dropped due to the entry table being full.
                       me1200LldpStatisticsGlobalCountersTableAgeOuts 1.3.6.1.4.1.9.9.815.1.34.1.3.2.1.4 unsigned32 read-only
Shows the number of entries deleted due to Time-To-Live expiring.
                       me1200LldpStatisticsGlobalCountersLastChangeTime 1.3.6.1.4.1.9.9.815.1.34.1.3.2.1.5 me1200unsigned64 read-only
Shows the time when the last entry was last deleted or added. It also shows the time elapsed since the last change was detected.
                   me1200LldpStatisticsTable 1.3.6.1.4.1.9.9.815.1.34.1.3.2.2 no-access
This table represents the LLDP interface counters
                       me1200LldpStatisticsEntry 1.3.6.1.4.1.9.9.815.1.34.1.3.2.2.1 no-access
Each port interface has a set of statistics counters
                           me1200LldpStatisticsIfIndex 1.3.6.1.4.1.9.9.815.1.34.1.3.2.2.1.1 me1200interfaceindex no-access
Logical interface number.
                           me1200LldpStatisticsTxTotal 1.3.6.1.4.1.9.9.815.1.34.1.3.2.2.1.2 unsigned32 read-only
Shows the number of LLDP frames transmitted.
                           me1200LldpStatisticsRxTotal 1.3.6.1.4.1.9.9.815.1.34.1.3.2.2.1.3 unsigned32 read-only
Shows the number of LLDP frames received.
                           me1200LldpStatisticsRxError 1.3.6.1.4.1.9.9.815.1.34.1.3.2.2.1.4 unsigned32 read-only
Shows the number of received LLDP frames containing some kind of error.
                           me1200LldpStatisticsRxDiscarded 1.3.6.1.4.1.9.9.815.1.34.1.3.2.2.1.5 unsigned32 read-only
Show the number of LLDP frames discarded. If a LLDP frame is received at an interface, and the switch's internal table has run full, the LLDP frame is counted and discarded. This situation is known as 'Too Many Neighbors' in the LLDP standard. LLDP frames require a new entry in the table when the Chassis ID or Remote Port ID is not already contained within the table. Entries are removed from the table when a given interface's link is down, an LLDP shutdown frame is received, or when the entry ages out.
                           me1200LldpStatisticsTLVsDiscarded 1.3.6.1.4.1.9.9.815.1.34.1.3.2.2.1.6 unsigned32 read-only
Shows the number of TLVs discarded. Each LLDP frame can contain multiple pieces of information, known as TLVs (TLV is short for 'Type Length Value'). If a TLV is malformed, it is counted and discarded.
                           me1200LldpStatisticsTLVsUnrecognized 1.3.6.1.4.1.9.9.815.1.34.1.3.2.2.1.7 unsigned32 read-only
Shows the number of well-formed TLVs, but with an unknown type value.
                           me1200LldpStatisticsTLVsOrgDiscarded 1.3.6.1.4.1.9.9.815.1.34.1.3.2.2.1.8 unsigned32 read-only
Shows the number of well-formed TLVs, but with an organizationally TLV which is not supported.
                           me1200LldpStatisticsAgeOuts 1.3.6.1.4.1.9.9.815.1.34.1.3.2.2.1.9 unsigned32 read-only
Show the number of age-outs. Each frame contains information about how long time the LLDP information is valid (age-out time). If no new LLDP frame is received within the age out time, the information is removed, and the counter is incremented.
               me1200LldpNeighborsInformationTable 1.3.6.1.4.1.9.9.815.1.34.1.3.3 no-access
This is a table to show the LLDP neighbors information for a specific interface.
                   me1200LldpNeighborsInformationEntry 1.3.6.1.4.1.9.9.815.1.34.1.3.3.1 no-access
Each port has a set of neighbors information
                       me1200LldpNeighborsInformationIfIndex 1.3.6.1.4.1.9.9.815.1.34.1.3.3.1.1 me1200interfaceindex no-access
Logical interface number.
                       me1200LldpNeighborsInformationLldpIndex 1.3.6.1.4.1.9.9.815.1.34.1.3.3.1.2 integer32 no-access
Neighbor information table entry index.
                       me1200LldpNeighborsInformationChassisId 1.3.6.1.4.1.9.9.815.1.34.1.3.3.1.4 me1200displaystring read-only
Shows the LLDP neighbor's chassis Id.
                       me1200LldpNeighborsInformationPortId 1.3.6.1.4.1.9.9.815.1.34.1.3.3.1.5 me1200displaystring read-only
Shows the LLDP neighbor's port id.
                       me1200LldpNeighborsInformationPortDescription 1.3.6.1.4.1.9.9.815.1.34.1.3.3.1.6 me1200displaystring read-only
Shows the LLDP neighbor's port description.
                       me1200LldpNeighborsInformationSystemName 1.3.6.1.4.1.9.9.815.1.34.1.3.3.1.7 me1200displaystring read-only
Shows the LLDP neighbor's system name.
                       me1200LldpNeighborsInformationSystemDescription 1.3.6.1.4.1.9.9.815.1.34.1.3.3.1.8 me1200displaystring read-only
Shows the LLDP neighbor's system description.
                       me1200LldpNeighborsInformationSystemCapabilities 1.3.6.1.4.1.9.9.815.1.34.1.3.3.1.9 me1200unsigned16 read-only
Shows the LLDP neighbor's system capabilities.
                       me1200LldpNeighborsInformationSystemCapabilitiesEnable 1.3.6.1.4.1.9.9.815.1.34.1.3.3.1.10 me1200unsigned16 read-only
Shows the LLDP neighbor's system capabilities which is enabled.
               me1200LldpNeighborsManagementInformationTable 1.3.6.1.4.1.9.9.815.1.34.1.3.4 no-access
This is a table to show the LLDP neighbor`s management information for a specific interface.
                   me1200LldpNeighborsManagementInformationEntry 1.3.6.1.4.1.9.9.815.1.34.1.3.4.1 no-access
Each port has a set of neighbors information
                       me1200LldpNeighborsManagementInformationIfIndex 1.3.6.1.4.1.9.9.815.1.34.1.3.4.1.1 me1200interfaceindex no-access
Logical interface number.
                       me1200LldpNeighborsManagementInformationLldpIndex 1.3.6.1.4.1.9.9.815.1.34.1.3.4.1.2 integer32 no-access
Neighbor information table entry index.
                       me1200LldpNeighborsManagementInformationLldpManagement 1.3.6.1.4.1.9.9.815.1.34.1.3.4.1.3 integer32 no-access
Neighbor management information table entry index.
                       me1200LldpNeighborsManagementInformationSystemManagementAddress 1.3.6.1.4.1.9.9.815.1.34.1.3.4.1.5 me1200displaystring read-only
Shows the LLDP neighbor's management address.
           me1200LldpControl 1.3.6.1.4.1.9.9.815.1.34.1.4
               me1200LldpStatisticsClear 1.3.6.1.4.1.9.9.815.1.34.1.4.1
                   me1200LldpControlStatisticsClearTable 1.3.6.1.4.1.9.9.815.1.34.1.4.1.1 no-access
This is a table to clear LLDP statistics for a specific interface.
                       me1200LldpControlStatisticsClearEntry 1.3.6.1.4.1.9.9.815.1.34.1.4.1.1.1 no-access
Each interface has a set of statistics counters
                           me1200LldpControlStatisticsClearIfIndex 1.3.6.1.4.1.9.9.815.1.34.1.4.1.1.1.1 me1200interfaceindex no-access
Logical interface number index.
                           me1200LldpControlStatisticsClearStatisticsClear 1.3.6.1.4.1.9.9.815.1.34.1.4.1.1.1.2 truthvalue read-write
Set to TRUE to clear the LLDP statistics of an interface.
                   me1200LldpControlStatisticsClearGlobal 1.3.6.1.4.1.9.9.815.1.34.1.4.1.2
                       me1200LldpControlStatisticsClearGlobalClear 1.3.6.1.4.1.9.9.815.1.34.1.4.1.2.1 truthvalue read-write
Set to TRUE to clear the LLDP global statistics.
       me1200LldpMibConformance 1.3.6.1.4.1.9.9.815.1.34.3
           me1200LldpMibCompliances 1.3.6.1.4.1.9.9.815.1.34.3.1
               me1200LldpMibCompliance 1.3.6.1.4.1.9.9.815.1.34.3.1.1
The compliance statement for the implementation.
           me1200LldpMibGroups 1.3.6.1.4.1.9.9.815.1.34.3.2
               me1200LldpGlobalInfoGroup 1.3.6.1.4.1.9.9.815.1.34.3.2.1
A collection of objects suitable for bulk operations.
               me1200LldpConfigurationInfoGroup 1.3.6.1.4.1.9.9.815.1.34.3.2.2
A collection of objects suitable for bulk operations.
               me1200LldpStatisticsGlobalCountersInfoGroup 1.3.6.1.4.1.9.9.815.1.34.3.2.3
A collection of objects suitable for bulk operations.
               me1200LldpStatisticsTableInfoGroup 1.3.6.1.4.1.9.9.815.1.34.3.2.4
A collection of objects suitable for bulk operations.
               me1200LldpNeighborsInformationInfoGroup 1.3.6.1.4.1.9.9.815.1.34.3.2.5
A collection of objects suitable for bulk operations.
               me1200LldpNeighborsManagementInformationInfoGroup 1.3.6.1.4.1.9.9.815.1.34.3.2.6
A collection of objects suitable for bulk operations.
               me1200LldpControlStatisticsClearTableInfoGroup 1.3.6.1.4.1.9.9.815.1.34.3.2.7
A collection of objects suitable for bulk operations.
               me1200LldpControlStatisticsClearGlobalInfoGroup 1.3.6.1.4.1.9.9.815.1.34.3.2.8
A collection of objects suitable for bulk operations.