ME1200-ERPS-MIB: View SNMP OID List / Download MIB

VENDOR: CISCO


 Home MIB: ME1200-ERPS-MIB
Download as:   
SNMPv2-CONF, CISCOME1200-MIB, SNMPv2-SMI, ME1200-TC, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 me1200ErpsMib 1.3.6.1.4.1.9.9.815.1.72
Private MIB for Ethernet Ring Protection Switching, ERPS.
       me1200ErpsMIBObjects 1.3.6.1.4.1.9.9.815.1.72.1
           me1200ErpsCapabilities 1.3.6.1.4.1.9.9.815.1.72.1.1
               me1200ErpsCapabilitiesMaxGroups 1.3.6.1.4.1.9.9.815.1.72.1.1.1 unsigned32 read-only
Maximum number of configured ERPS groups.
               me1200ErpsCapabilitiesMaxVlansPerGroup 1.3.6.1.4.1.9.9.815.1.72.1.1.2 unsigned32 read-only
Maximum number of protected VLANS per ERPS group.
           me1200ErpsConfig 1.3.6.1.4.1.9.9.815.1.72.1.2
               me1200ErpsConfigTable 1.3.6.1.4.1.9.9.815.1.72.1.2.1 no-access
This is the ERPS group configuration table.
                   me1200ErpsConfigEntry 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1 no-access
Each entry in this table represents an ERPS group.
                       me1200ErpsConfigGroupIndex 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.1 integer32 no-access
ERPS group index number. Valid range is (1..max groups). The maximum group number is platform-specific and can be retrieved from the ERPS capabilities.
                       me1200ErpsConfigRingType 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.2 me1200erpsringtype read-write
Type of ring. Can only be set once for a ring instance.
                       me1200ErpsConfigPort0 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.3 me1200interfaceindex read-write
ifindex of ring protection port 0. Can only be set once for a ring instance.
                       me1200ErpsConfigPort1 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.4 me1200interfaceindex read-write
ifindex of ring protection Port 1. For interconnected sub-rings this value must be zero. Can only be set once for a ring instance.
                       me1200ErpsConfigInterconnectMajorRingGroupIndex 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.5 unsigned32 read-write
For sub-ring: zero = not interconnected; > zero = index of major ring group. For major ring: zero = not interconnected; > zero = is interconnected (i.e flag-like semantics). Can only be set once for a ring instance.
                       me1200ErpsConfigVirtualChannel 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.6 truthvalue read-write
Whether to use a virtual channel. Can only be set once for a ring instance.
                       me1200ErpsConfigPort0SignalFailMepIndex 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.7 unsigned32 read-write
Index of SignalFail MEP for Port 0. Zero if not set. To clear an ERPS group's MEP association, set this to zero; it affects all MEP indices.
                       me1200ErpsConfigPort0ApsMepIndex 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.8 unsigned32 read-write
Index of APS MEP for Port 0. Zero if not set.
                       me1200ErpsConfigPort1SignalFailMepIndex 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.9 unsigned32 read-write
Index of SignalFail MEP for Port 1. Zero if not set. Must be zero for interconnected sub-rings.
                       me1200ErpsConfigPort1ApsMepIndex 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.10 unsigned32 read-write
Index of APS MEP for Port 1. Zero if not set. Must be zero for interconnected sub-rings with virtual channel.
                       me1200ErpsConfigHoldOffTime 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.11 unsigned32 read-write
Hold off time in ms. Value is rounded down to 100ms precision. Valid range is 0-10000 ms
                       me1200ErpsConfigWaitToRestoreTime 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.12 unsigned32 read-write
Wait-to-Restore time in ms. Valid range is 60000-720000 ms (1-12 minutes).
                       me1200ErpsConfigGuardTime 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.13 unsigned32 read-write
Guard time in ms. Valid range is 10-2000 ms.
                       me1200ErpsConfigRplMode 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.14 me1200erpsrplmode read-write
Ring Protection Link mode.
                       me1200ErpsConfigRplPort 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.15 me1200erpsport read-write
RPL port. Only valid if the ERPS group is RPL owner or neighbour.
                       me1200ErpsConfigRevertive 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.16 truthvalue read-write
Revertive (true) or Non-revertive (false) mode.
                       me1200ErpsConfigVersion 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.17 me1200erpsversion read-write
ERPS protocol version.
                       me1200ErpsConfigTopologyChange 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.18 truthvalue read-write
Whether to enable Topology Change propagation; only valid for an interconnected node.
                       me1200ErpsConfigProtectedVlans0Kto1K 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.19 me1200vlanlistquarter read-write
First quarter of bit-array indicating whether a VLAN is protected by this ring instance ('1') or not ('0').
                       me1200ErpsConfigProtectedVlans1Kto2K 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.20 me1200vlanlistquarter read-write
Second quarter of bit-array indicating whether a VLAN is protected by this ring instance ('1') or not ('0').
                       me1200ErpsConfigProtectedVlans2Kto3K 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.21 me1200vlanlistquarter read-write
Third quarter of bit-array indicating whether a VLAN is protected by this ring instance ('1') or not ('0').
                       me1200ErpsConfigProtectedVlans3Kto4K 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.22 me1200vlanlistquarter read-write
Fourth quarter of bit-array indicating whether a VLAN is protected by this ring instance ('1') or not ('0').
                       me1200ErpsConfigAction 1.3.6.1.4.1.9.9.815.1.72.1.2.1.1.100 me1200roweditorstate read-write
Action
               me1200ErpsConfigRowEditor 1.3.6.1.4.1.9.9.815.1.72.1.2.2
                   me1200ErpsConfigRowEditorGroupIndex 1.3.6.1.4.1.9.9.815.1.72.1.2.2.1 integer32 read-write
ERPS group index number. Valid range is (1..max groups). The maximum group number is platform-specific and can be retrieved from the ERPS capabilities.
                   me1200ErpsConfigRowEditorRingType 1.3.6.1.4.1.9.9.815.1.72.1.2.2.2 me1200erpsringtype read-write
Type of ring. Can only be set once for a ring instance.
                   me1200ErpsConfigRowEditorPort0 1.3.6.1.4.1.9.9.815.1.72.1.2.2.3 me1200interfaceindex read-write
ifindex of ring protection port 0. Can only be set once for a ring instance.
                   me1200ErpsConfigRowEditorPort1 1.3.6.1.4.1.9.9.815.1.72.1.2.2.4 me1200interfaceindex read-write
ifindex of ring protection Port 1. For interconnected sub-rings this value must be zero. Can only be set once for a ring instance.
                   me1200ErpsConfigRowEditorInterconnectMajorRingGroupIndex 1.3.6.1.4.1.9.9.815.1.72.1.2.2.5 unsigned32 read-write
For sub-ring: zero = not interconnected; > zero = index of major ring group. For major ring: zero = not interconnected; > zero = is interconnected (i.e flag-like semantics). Can only be set once for a ring instance.
                   me1200ErpsConfigRowEditorVirtualChannel 1.3.6.1.4.1.9.9.815.1.72.1.2.2.6 truthvalue read-write
Whether to use a virtual channel. Can only be set once for a ring instance.
                   me1200ErpsConfigRowEditorPort0SignalFailMepIndex 1.3.6.1.4.1.9.9.815.1.72.1.2.2.7 unsigned32 read-write
Index of SignalFail MEP for Port 0. Zero if not set. To clear an ERPS group's MEP association, set this to zero; it affects all MEP indices.
                   me1200ErpsConfigRowEditorPort0ApsMepIndex 1.3.6.1.4.1.9.9.815.1.72.1.2.2.8 unsigned32 read-write
Index of APS MEP for Port 0. Zero if not set.
                   me1200ErpsConfigRowEditorPort1SignalFailMepIndex 1.3.6.1.4.1.9.9.815.1.72.1.2.2.9 unsigned32 read-write
Index of SignalFail MEP for Port 1. Zero if not set. Must be zero for interconnected sub-rings.
                   me1200ErpsConfigRowEditorPort1ApsMepIndex 1.3.6.1.4.1.9.9.815.1.72.1.2.2.10 unsigned32 read-write
Index of APS MEP for Port 1. Zero if not set. Must be zero for interconnected sub-rings with virtual channel.
                   me1200ErpsConfigRowEditorHoldOffTime 1.3.6.1.4.1.9.9.815.1.72.1.2.2.11 unsigned32 read-write
Hold off time in ms. Value is rounded down to 100ms precision. Valid range is 0-10000 ms
                   me1200ErpsConfigRowEditorWaitToRestoreTime 1.3.6.1.4.1.9.9.815.1.72.1.2.2.12 unsigned32 read-write
Wait-to-Restore time in ms. Valid range is 60000-720000 ms (1-12 minutes).
                   me1200ErpsConfigRowEditorGuardTime 1.3.6.1.4.1.9.9.815.1.72.1.2.2.13 unsigned32 read-write
Guard time in ms. Valid range is 10-2000 ms.
                   me1200ErpsConfigRowEditorRplMode 1.3.6.1.4.1.9.9.815.1.72.1.2.2.14 me1200erpsrplmode read-write
Ring Protection Link mode.
                   me1200ErpsConfigRowEditorRplPort 1.3.6.1.4.1.9.9.815.1.72.1.2.2.15 me1200erpsport read-write
RPL port. Only valid if the ERPS group is RPL owner or neighbour.
                   me1200ErpsConfigRowEditorRevertive 1.3.6.1.4.1.9.9.815.1.72.1.2.2.16 truthvalue read-write
Revertive (true) or Non-revertive (false) mode.
                   me1200ErpsConfigRowEditorVersion 1.3.6.1.4.1.9.9.815.1.72.1.2.2.17 me1200erpsversion read-write
ERPS protocol version.
                   me1200ErpsConfigRowEditorTopologyChange 1.3.6.1.4.1.9.9.815.1.72.1.2.2.18 truthvalue read-write
Whether to enable Topology Change propagation; only valid for an interconnected node.
                   me1200ErpsConfigRowEditorProtectedVlans0Kto1K 1.3.6.1.4.1.9.9.815.1.72.1.2.2.19 me1200vlanlistquarter read-write
First quarter of bit-array indicating whether a VLAN is protected by this ring instance ('1') or not ('0').
                   me1200ErpsConfigRowEditorProtectedVlans1Kto2K 1.3.6.1.4.1.9.9.815.1.72.1.2.2.20 me1200vlanlistquarter read-write
Second quarter of bit-array indicating whether a VLAN is protected by this ring instance ('1') or not ('0').
                   me1200ErpsConfigRowEditorProtectedVlans2Kto3K 1.3.6.1.4.1.9.9.815.1.72.1.2.2.21 me1200vlanlistquarter read-write
Third quarter of bit-array indicating whether a VLAN is protected by this ring instance ('1') or not ('0').
                   me1200ErpsConfigRowEditorProtectedVlans3Kto4K 1.3.6.1.4.1.9.9.815.1.72.1.2.2.22 me1200vlanlistquarter read-write
Fourth quarter of bit-array indicating whether a VLAN is protected by this ring instance ('1') or not ('0').
                   me1200ErpsConfigRowEditorAction 1.3.6.1.4.1.9.9.815.1.72.1.2.2.100 me1200roweditorstate read-write
Action
           me1200ErpsStatus 1.3.6.1.4.1.9.9.815.1.72.1.3
               me1200ErpsStatusTable 1.3.6.1.4.1.9.9.815.1.72.1.3.1 no-access
This table contains status per EPRS group.
                   me1200ErpsStatusEntry 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1 no-access
Status.
                       me1200ErpsStatusGroupIndex 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.1 integer32 no-access
ERPS group index number. Valid range is (1..max groups). The maximum group number is platform-specific and can be retrieved from the ERPS capabilities.
                       me1200ErpsStatusActive 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.2 truthvalue read-only
Specifies whether ERPS group is currently active or not.
                       me1200ErpsStatusProtectionState 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.3 me1200erpsprotectionstate read-only
Specifies current ERPS group protection state.
                       me1200ErpsStatusRplBlocked 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.4 truthvalue read-only
Specifies whether the RPL is currently blocked or not.
                       me1200ErpsStatusWtrRemaining 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.5 unsigned32 read-only
Specifies the remaining wait-time before restoring ring.
                       me1200ErpsStatusAdminCmd 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.6 me1200erpsadmincmd read-only
Specifies the currently active administrative command.
                       me1200ErpsStatusFopAlarm 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.7 truthvalue read-only
Specifies whether the FailureOfProtocol alarm is currently active or not.
                       me1200ErpsStatusTxActive 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.8 truthvalue read-only
Specifies whether R-APS transmission is currently active.
                       me1200ErpsStatusTxRequestOrState 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.9 me1200erpsrequeststate read-only
Specifies the currently transmitted request/state. Only relevant when Tx is active.
                       me1200ErpsStatusTxRplBlocked 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.10 truthvalue read-only
Specifies the currently transmitted RPL Blocked flag. Only relevant when Tx is active.
                       me1200ErpsStatusTxDoNotFlush 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.11 truthvalue read-only
Specifies the currently transmitted Do Not Flush flag. Only relevant when Tx is active.
                       me1200ErpsStatusBlockedPortReference 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.12 me1200erpsport read-only
Specifies the currently transmitted Blocked Port Reference. Only relevant when Tx is active.
                       me1200ErpsStatusPort0Blocked 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.13 truthvalue read-only
Specifies whether ring Port 0 is blocked or not.
                       me1200ErpsStatusPort0State 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.14 me1200erpsportstate read-only
Specifies the state of ring Port 0.
                       me1200ErpsStatusPort0RxActive 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.15 truthvalue read-only
Specifies if ring Port0 receives R-APS.
                       me1200ErpsStatusPort0RxRequestOrState 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.16 me1200erpsrequeststate read-only
Specifies the most recently received request/state on ring Port 0. Only relevant when Rx is active.
                       me1200ErpsStatusPort0RxRplBlocked 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.17 truthvalue read-only
Specifies the most recently received RPL Blocked flag on ring Port 0. Only relevant when Rx is active.
                       me1200ErpsStatusPort0RxDoNotFlush 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.18 truthvalue read-only
Specifies the most recently received Do Not Flush flag on ring Port 0. Only relevant when Rx is active.
                       me1200ErpsStatusPort0RxBlockedPortReference 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.19 me1200erpsport read-only
Specifies the most recently received Blocked Port Reference on ring Port 0. Only relevant when Rx is active.
                       me1200ErpsStatusPort0RxNodeId 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.20 octet string read-only
Specifies the most recently received node ID on ring Port 0. Only relevant when Rx is active.
                       me1200ErpsStatusPort1Blocked 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.21 truthvalue read-only
Specifies whether ring Port 1 is blocked or not.
                       me1200ErpsStatusPort1State 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.22 me1200erpsportstate read-only
Specifies the state of ring Port 1.
                       me1200ErpsStatusPort1RxActive 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.23 truthvalue read-only
Specifies if ring Port1 receives R-APS.
                       me1200ErpsStatusPort1RxRequestOrState 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.24 me1200erpsrequeststate read-only
Specifies the most recently received request/state on ring Port 1. Only relevant when Rx is active.
                       me1200ErpsStatusPort1RxRplBlocked 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.25 truthvalue read-only
Specifies the most recently received RPL Blocked flag on ring Port 1. Only relevant when Rx is active.
                       me1200ErpsStatusPort1RxDoNotFlush 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.26 truthvalue read-only
Specifies the most recently received Do Not Flush flag on ring Port 1. Only relevant when Rx is active.
                       me1200ErpsStatusPort1RxBlockedPortReference 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.27 me1200erpsport read-only
Specifies the most recently received Blocked Port Reference on ring Port 1. Only relevant when Rx is active.
                       me1200ErpsStatusPort1RxNodeId 1.3.6.1.4.1.9.9.815.1.72.1.3.1.1.28 octet string read-only
Specifies the most recently received node ID on ring Port 1. Only relevant when Rx is active.
           me1200ErpsStatistics 1.3.6.1.4.1.9.9.815.1.72.1.4
               me1200ErpsStatisticsTable 1.3.6.1.4.1.9.9.815.1.72.1.4.1 no-access
This table contains statistics per EPRS group.
                   me1200ErpsStatisticsEntry 1.3.6.1.4.1.9.9.815.1.72.1.4.1.1 no-access
Various PDU and event counters.
                       me1200ErpsStatisticsGroupIndex 1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.1 integer32 no-access
ERPS group index number. Valid range is (1..max groups). The maximum group number is platform-specific and can be retrieved from the ERPS capabilities.
                       me1200ErpsStatisticsRapsTx 1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.2 counter64 read-only
Number of transmitted RAPS PDUs.
                       me1200ErpsStatisticsRapsRx 1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.3 counter64 read-only
Number of received RAPS PDUs.
                       me1200ErpsStatisticsRapsRxDrop 1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.4 counter64 read-only
Number of received RAPS PDUs that were dropped.
                       me1200ErpsStatisticsLocalSF 1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.5 counter64 read-only
Number of local SignalFail events.
                       me1200ErpsStatisticsLocalSFCleared 1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.6 counter64 read-only
Number of local SignalFail clear events.
                       me1200ErpsStatisticsRemoteSF 1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.7 counter64 read-only
Number of remote SignalFail events.
                       me1200ErpsStatisticsNR 1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.8 counter64 read-only
Number of NoRequest events.
                       me1200ErpsStatisticsRemoteMS 1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.9 counter64 read-only
Number of remote ManualSwitch events.
                       me1200ErpsStatisticsLocalMS 1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.10 counter64 read-only
Number of local ManualSwitch events.
                       me1200ErpsStatisticsRemoteFS 1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.11 counter64 read-only
Number of remote ForcedSwitch events.
                       me1200ErpsStatisticsLocalFS 1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.12 counter64 read-only
Number of local ForcedSwitch events.
                       me1200ErpsStatisticsAdminClear 1.3.6.1.4.1.9.9.815.1.72.1.4.1.1.13 counter64 read-only
Number of AdminClear events.
           me1200ErpsControl 1.3.6.1.4.1.9.9.815.1.72.1.5
               me1200ErpsControlTable 1.3.6.1.4.1.9.9.815.1.72.1.5.1 no-access
This is the ERPS group control table.
                   me1200ErpsControlEntry 1.3.6.1.4.1.9.9.815.1.72.1.5.1.1 no-access
Each entry in this table represents dynamic control elements an ERPS group.
                       me1200ErpsControlGroupIndex 1.3.6.1.4.1.9.9.815.1.72.1.5.1.1.1 integer32 no-access
ERPS group index number. Valid range is (1..max groups). The maximum group number is platform-specific and can be retrieved from the ERPS capabilities.
                       me1200ErpsControlCommand 1.3.6.1.4.1.9.9.815.1.72.1.5.1.1.2 me1200erpscontrolcmd read-write
Control command to execute. Always returns none when read.
                       me1200ErpsControlPort 1.3.6.1.4.1.9.9.815.1.72.1.5.1.1.3 me1200erpsport read-write
Ring port affected by control command. Only relevant for administrative commands. Always returns port0 when read.
       me1200ErpsMIBConformance 1.3.6.1.4.1.9.9.815.1.72.2
           me1200ErpsMIBCompliances 1.3.6.1.4.1.9.9.815.1.72.2.1
               me1200ErpsMibCompliance 1.3.6.1.4.1.9.9.815.1.72.2.1.1
The compliance statement for the implementation.
           me1200ErpsMIBGroups 1.3.6.1.4.1.9.9.815.1.72.2.2
               me1200ErpsCapabilitiesInfoGroup 1.3.6.1.4.1.9.9.815.1.72.2.2.1
A collection of objects suitable for bulk operations.
               me1200ErpsConfigTableInfoGroup 1.3.6.1.4.1.9.9.815.1.72.2.2.2
A collection of objects suitable for bulk operations.
               me1200ErpsConfigRowEditorInfoGroup 1.3.6.1.4.1.9.9.815.1.72.2.2.3
A collection of objects suitable for bulk operations.
               me1200ErpsStatusTableInfoGroup 1.3.6.1.4.1.9.9.815.1.72.2.2.4
A collection of objects suitable for bulk operations.
               me1200ErpsStatisticsTableInfoGroup 1.3.6.1.4.1.9.9.815.1.72.2.2.5
A collection of objects suitable for bulk operations.
               me1200ErpsControlTableInfoGroup 1.3.6.1.4.1.9.9.815.1.72.2.2.6
A collection of objects suitable for bulk operations.