MDS-IF-NX-MIB: View SNMP OID List / Download MIB
VENDOR: MICROWAVE DATA SYSTEMS
Home | MIB: MDS-IF-NX-MIB | |||
---|---|---|---|---|
Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
Object Name | OID | Type | Access | Info |
mdsIfNxMIB | 1.3.6.1.4.1.4130.10.2.3 |
The MIB module to describe the 900 Mhz(NX) interface. |
||
mIfNxMIBObjects | 1.3.6.1.4.1.4130.10.2.3.1 | |||
mIfNxConfig | 1.3.6.1.4.1.4130.10.2.3.1.1 | |||
mIfNxStatus | 1.3.6.1.4.1.4130.10.2.3.1.2 | |||
mIfNxStatusTable | 1.3.6.1.4.1.4130.10.2.3.1.2.1 | no-access |
This table contains status of NX interfaces. This table has a sparse dependent relationship on the ifTable. For each entry in this table, there exists an entry in the ifTable. |
|
1.3.6.1.4.1.4130.10.2.3.1.2.1.1 | no-access |
Each entry contains status of a cellular interface. |
||
mIfNxLinkStatus | 1.3.6.1.4.1.4130.10.2.3.1.2.1.1.1 | linkstatus | read-only |
Link State. |
mIfNxInitStatus | 1.3.6.1.4.1.4130.10.2.3.1.2.1.1.2 | initstatus | read-only |
State of the NIC Initialization. |
mIfNxCurrentModem | 1.3.6.1.4.1.4130.10.2.3.1.2.1.1.3 | modemtype | read-only |
The current operating modem. |
mIfNxAlarms | 1.3.6.1.4.1.4130.10.2.3.1.2.1.1.4 | alarmflags | read-only |
The current NIC alarms. |
mIfNxSerialNumber | 1.3.6.1.4.1.4130.10.2.3.1.2.1.1.5 | unsigned32 | read-only |
Serial Number. |
mIfNxFirmwareRevision | 1.3.6.1.4.1.4130.10.2.3.1.2.1.1.6 | firmwarerevision | read-only |
NIC Firmware Revision. |
mIfNxHardwareId | 1.3.6.1.4.1.4130.10.2.3.1.2.1.1.7 | unsignedbyte | read-only |
The Hardware ID. |
mIfNxHardwareRevision | 1.3.6.1.4.1.4130.10.2.3.1.2.1.1.8 | unsignedbyte | read-only |
The Hardware Revision. |
mIfNxTemperature | 1.3.6.1.4.1.4130.10.2.3.1.2.1.1.9 | integer32 | read-only |
The transceiver temperature. |
mIfNxApInfoApAddress | 1.3.6.1.4.1.4130.10.2.3.1.2.1.1.10 | macaddress | read-only |
MAC address of access point this device is linked to. |
mIfNxApInfoIpAddress | 1.3.6.1.4.1.4130.10.2.3.1.2.1.1.11 | inetipaddress | read-only |
IP address of access point this device is linked to. |
mIfNxApInfoConnectedTime | 1.3.6.1.4.1.4130.10.2.3.1.2.1.1.12 | integer32 | read-only |
Time elapsed since link established. |
mIfNxApInfoAvgRssi | 1.3.6.1.4.1.4130.10.2.3.1.2.1.1.13 | integer32 | read-only |
Average received signal strength index. |
mIfNxApInfoAvgLqi | 1.3.6.1.4.1.4130.10.2.3.1.2.1.1.14 | unsigned32 | read-only |
Average link quality index. |
mIfNxMacStatsTxSuccess | 1.3.6.1.4.1.4130.10.2.3.1.2.1.1.15 | unsigned32 | read-only |
Successful transmissions. |
mIfNxMacStatsTxFail | 1.3.6.1.4.1.4130.10.2.3.1.2.1.1.16 | unsigned32 | read-only |
Failed transmissions, TTL expired or retry count exceeded. |
mIfNxMacStatsTxQueueFull | 1.3.6.1.4.1.4130.10.2.3.1.2.1.1.17 | unsigned32 | read-only |
Failed transmissions, MAC queue full. |
mIfNxMacStatsTxNoSync | 1.3.6.1.4.1.4130.10.2.3.1.2.1.1.18 | unsigned32 | read-only |
Packets dropped because the MAC is not synchronized. |
mIfNxMacStatsTxNoAssoc | 1.3.6.1.4.1.4130.10.2.3.1.2.1.1.19 | unsigned32 | read-only |
Packets dropped because the MAC is not associated. |
mIfNxMacStatsTxError | 1.3.6.1.4.1.4130.10.2.3.1.2.1.1.20 | unsigned32 | read-only |
Packets dropped for other reasons. Currently unused. |
mIfNxMacStatsTxRetry | 1.3.6.1.4.1.4130.10.2.3.1.2.1.1.21 | unsigned32 | read-only |
Re-transmission count due to to previously unsuccessful transmission. |
mIfNxMacStatsRxSuccess | 1.3.6.1.4.1.4130.10.2.3.1.2.1.1.22 | unsigned32 | read-only |
Valid packet received. |
mIfNxMacStatsSyncCheckError | 1.3.6.1.4.1.4130.10.2.3.1.2.1.1.23 | unsigned32 | read-only |
Lost synchronization. |
mIfNxMacStatsSyncChange | 1.3.6.1.4.1.4130.10.2.3.1.2.1.1.24 | unsigned32 | read-only |
Sychronization changed or forced drop. |
mIfNxCurrentDeviceMode | 1.3.6.1.4.1.4130.10.2.3.1.2.1.1.25 | devicemodetype | read-only |
The current device mode. |
mIfNxLastRssi | 1.3.6.1.4.1.4130.10.2.3.1.2.1.1.26 | integer32 | read-only |
Average received signal strength index. |
mIfNxLastLqi | 1.3.6.1.4.1.4130.10.2.3.1.2.1.1.27 | unsigned32 | read-only |
Average link quality index. |
mIfNxLastChan | 1.3.6.1.4.1.4130.10.2.3.1.2.1.1.28 | unsigned32 | read-only |
Average link quality index. |
mIfNxActiveNic | 1.3.6.1.4.1.4130.10.2.3.1.2.1.1.29 | truthvalue | read-only |
If the nic is active. |
mIfNxStatusConnRemTable | 1.3.6.1.4.1.4130.10.2.3.1.2.2 | no-access |
The list of connected remotes. |
|
1.3.6.1.4.1.4130.10.2.3.1.2.2.1 | no-access |
The connected remote status entry. |
||
mIfNxStatusConnRemAddress | 1.3.6.1.4.1.4130.10.2.3.1.2.2.1.1 | macaddress | read-only |
Address of connected remote. |
mIfNxStatusConnRemIpAddress | 1.3.6.1.4.1.4130.10.2.3.1.2.2.1.2 | inetipaddress | read-only |
Ip address of connected remote. |
mIfNxStatusConnRemTimeToLive | 1.3.6.1.4.1.4130.10.2.3.1.2.2.1.3 | unsigned32 | read-only |
Time left until this entry is aged out. |
mIfNxStatusConnRemLinkStatus | 1.3.6.1.4.1.4130.10.2.3.1.2.2.1.4 | linkstatus | read-only |
The status of the connection to a remote device. |
mIfNxStatusConnRemNicId | 1.3.6.1.4.1.4130.10.2.3.1.2.2.1.5 | unsignedshort | read-only |
The RF connection identifier for the connected remote device. |
mIfNxStatusConnRemAvgRssi | 1.3.6.1.4.1.4130.10.2.3.1.2.2.1.6 | integer32 | read-only |
Average received signal strength index. |
mIfNxStatusConnRemAvgLqi | 1.3.6.1.4.1.4130.10.2.3.1.2.2.1.7 | unsigned32 | read-only |
Average link quality index. |
mIfNxStatusConnRemStatsTxPackets | 1.3.6.1.4.1.4130.10.2.3.1.2.2.1.8 | unsigned32 | read-only |
tx packets |
mIfNxStatusConnRemStatsTxBytes | 1.3.6.1.4.1.4130.10.2.3.1.2.2.1.9 | unsigned32 | read-only |
tx bytes |
mIfNxStatusConnRemStatsRxPackets | 1.3.6.1.4.1.4130.10.2.3.1.2.2.1.10 | unsigned32 | read-only |
rx packets |
mIfNxStatusConnRemStatsRxBytes | 1.3.6.1.4.1.4130.10.2.3.1.2.2.1.11 | unsigned32 | read-only |
rx bytes |
mIfNxStatusConnRemStatsTxError | 1.3.6.1.4.1.4130.10.2.3.1.2.2.1.12 | unsigned32 | read-only |
tx error |
mIfNxStatusConnRemStatsRxError | 1.3.6.1.4.1.4130.10.2.3.1.2.2.1.13 | unsigned32 | read-only |
rx error |
mIfNxStatusConnRemStatsTxDrop | 1.3.6.1.4.1.4130.10.2.3.1.2.2.1.14 | unsigned32 | read-only |
tx drop |
mIfNxStatusConnRemStatsRxDrop | 1.3.6.1.4.1.4130.10.2.3.1.2.2.1.15 | unsigned32 | read-only |
rx drop |
mIfNxStatusConnRemAvgSnr | 1.3.6.1.4.1.4130.10.2.3.1.2.2.1.16 | unsigned32 | read-only |
Average signal to noise ratio. |
mIfNxStatusConnRemStatsGateway | 1.3.6.1.4.1.4130.10.2.3.1.2.2.1.17 | macaddress | read-only |
The mac address of the next hop |
mIfNxStatusConnRemStatsAllIp | 1.3.6.1.4.1.4130.10.2.3.1.2.2.1.18 | octet string | read-only |
String version of all IP addresses |
mIfNxStatusConnRemStatsName | 1.3.6.1.4.1.4130.10.2.3.1.2.2.1.19 | octet string | read-only |
System name |
mIfNxStatusConnRemStatsAlarmed | 1.3.6.1.4.1.4130.10.2.3.1.2.2.1.20 | truthvalue | read-only |
Is alarmed |
mIfNxStatusConnRemStatsVersion | 1.3.6.1.4.1.4130.10.2.3.1.2.2.1.21 | octet string | read-only |
Host firmware version |
mIfNxStatusConnRemStatsTemp | 1.3.6.1.4.1.4130.10.2.3.1.2.2.1.22 | integer32 | read-only |
System temprature in celsius |
mIfNxStatusConnRemStatsDwnRssi | 1.3.6.1.4.1.4130.10.2.3.1.2.2.1.23 | integer32 | read-only |
Downstream RSSI |
mIfNxStatusConnRemStatsDwnLqi | 1.3.6.1.4.1.4130.10.2.3.1.2.2.1.24 | unsigned32 | read-only |
Downstream LQI |
mIfNxStatusConnRemStatsDwnSnr | 1.3.6.1.4.1.4130.10.2.3.1.2.2.1.25 | unsigned32 | read-only |
Downstream SNR |
mIfNxStatusEndpointTable | 1.3.6.1.4.1.4130.10.2.3.1.2.3 | no-access |
The list of endpoints. |
|
1.3.6.1.4.1.4130.10.2.3.1.2.3.1 | no-access |
The endpoint status entry. |
||
mIfNxStatusEndpointAddress | 1.3.6.1.4.1.4130.10.2.3.1.2.3.1.1 | macaddress | read-only |
Address of endpoint. |
mIfNxStatusEndpointIpAddress | 1.3.6.1.4.1.4130.10.2.3.1.2.3.1.2 | inetipaddress | read-only |
Ip address of endpoint. |
mIfNxStatusEndpointTimeToLive | 1.3.6.1.4.1.4130.10.2.3.1.2.3.1.3 | unsigned32 | read-only |
Time left until this entry is aged out. |
mIfNxStatusEndpointRemAddress | 1.3.6.1.4.1.4130.10.2.3.1.2.3.1.4 | macaddress | read-only |
The MAC address of the remote device servicing this endpoint. |
mIfNxStatusEndpointStatsTxPackets | 1.3.6.1.4.1.4130.10.2.3.1.2.3.1.5 | unsigned32 | read-only |
tx packets |
mIfNxStatusEndpointStatsTxBytes | 1.3.6.1.4.1.4130.10.2.3.1.2.3.1.6 | unsigned32 | read-only |
tx bytes |
mIfNxStatusEndpointStatsRxPackets | 1.3.6.1.4.1.4130.10.2.3.1.2.3.1.7 | unsigned32 | read-only |
rx packets |
mIfNxStatusEndpointStatsRxBytes | 1.3.6.1.4.1.4130.10.2.3.1.2.3.1.8 | unsigned32 | read-only |
rx bytes |
mIfNxStatusEndpointStatsTxError | 1.3.6.1.4.1.4130.10.2.3.1.2.3.1.9 | unsigned32 | read-only |
tx error |
mIfNxStatusEndpointStatsRxError | 1.3.6.1.4.1.4130.10.2.3.1.2.3.1.10 | unsigned32 | read-only |
rx error |
mIfNxStatusEndpointStatsTxDrop | 1.3.6.1.4.1.4130.10.2.3.1.2.3.1.11 | unsigned32 | read-only |
tx drop |
mIfNxStatusEndpointStatsRxDrop | 1.3.6.1.4.1.4130.10.2.3.1.2.3.1.12 | unsigned32 | read-only |
rx drop |
mIfNxStatusActChanTable | 1.3.6.1.4.1.4130.10.2.3.1.2.4 | no-access |
The list of channels. |
|
1.3.6.1.4.1.4130.10.2.3.1.2.4.1 | no-access |
The endpoint status entry. |
||
mIfNxStatusActChanChannel | 1.3.6.1.4.1.4130.10.2.3.1.2.4.1.1 | unsignedbyte | read-only |
Channel. |
mIfNxStatusActChanFrequency | 1.3.6.1.4.1.4130.10.2.3.1.2.4.1.2 | octet string | read-only |
Frequency. |
mIfNxStatusActChanAvgRssi | 1.3.6.1.4.1.4130.10.2.3.1.2.4.1.3 | integer32 | read-only |
Average received signal strength index. |
mIfNxStatusActChanAvgLqi | 1.3.6.1.4.1.4130.10.2.3.1.2.4.1.4 | unsigned32 | read-only |
Average link quality index. |
mdsIfNxMIBConformance | 1.3.6.1.4.1.4130.10.2.3.3 | |||
mdsIfNxMIBCompliances | 1.3.6.1.4.1.4130.10.2.3.3.1 | |||
mIfNxCompliance | 1.3.6.1.4.1.4130.10.2.3.3.1.1 |
The compliance statement for SNMP entities that implement the MDS-IF-NX-MIB. |
||
mdsIfNxMIBGroups | 1.3.6.1.4.1.4130.10.2.3.3.2 | |||
mIfNxStatusGroup | 1.3.6.1.4.1.4130.10.2.3.3.2.1 |
A collection of objects providing information about common NX interface status. |
||
mIfNxStatusConnRemGroup | 1.3.6.1.4.1.4130.10.2.3.3.2.2 |
A collection of objects providing information about connected remotes status. |
||
mIfNxStatusEndpointGroup | 1.3.6.1.4.1.4130.10.2.3.3.2.3 |
A collection of objects providing information about endpoints status. |
||
mIfNxStatusActChanGroup | 1.3.6.1.4.1.4130.10.2.3.3.2.4 |
A collection of objects providing information about active channel status. |