MDS-IF-LW-MIB: View SNMP OID List / Download MIB
VENDOR: MICROWAVE DATA SYSTEMS
Home | MIB: MDS-IF-LW-MIB | |||
---|---|---|---|---|
Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
Object Name | OID | Type | Access | Info |
mdsIfLwMIB | 1.3.6.1.4.1.4130.10.2.6 |
The MIB module to describe the licenced narrowband interface. |
||
mIfLwMIBObjects | 1.3.6.1.4.1.4130.10.2.6.1 | |||
mIfLwConfig | 1.3.6.1.4.1.4130.10.2.6.1.1 | |||
mIfLwStatus | 1.3.6.1.4.1.4130.10.2.6.1.2 | |||
mIfLwStatusTable | 1.3.6.1.4.1.4130.10.2.6.1.2.1 | no-access |
This table contains status of LW interfaces. This table has a sparse dependent relationship on the ifTable. For each entry in this table, there exists an entry in the ifTable. |
|
1.3.6.1.4.1.4130.10.2.6.1.2.1.1 | no-access |
Each entry contains status of a cellular interface. |
||
mIfLwLinkStatus | 1.3.6.1.4.1.4130.10.2.6.1.2.1.1.1 | linkstatus | read-only |
Link State. |
mIfLwInitStatus | 1.3.6.1.4.1.4130.10.2.6.1.2.1.1.2 | initstatus | read-only |
State of the NIC Initialization. |
mIfLwCurrentDeviceMode | 1.3.6.1.4.1.4130.10.2.6.1.2.1.1.3 | devicemodetype | read-only |
The current device mode. |
mIfLwAlarms | 1.3.6.1.4.1.4130.10.2.6.1.2.1.1.4 | alarmflags | read-only |
The current NIC alarms. |
mIfLwSerialNumber | 1.3.6.1.4.1.4130.10.2.6.1.2.1.1.5 | unsigned32 | read-only |
Serial Number. |
mIfLwFirmwareRevision | 1.3.6.1.4.1.4130.10.2.6.1.2.1.1.6 | firmwarerevision | read-only |
NIC Firmware Revision. |
mIfLwHardwareId | 1.3.6.1.4.1.4130.10.2.6.1.2.1.1.7 | unsignedbyte | read-only |
The Hardware ID. |
mIfLwHardwareRevision | 1.3.6.1.4.1.4130.10.2.6.1.2.1.1.8 | unsignedbyte | read-only |
The Hardware Revision. |
mIfLwTemperature | 1.3.6.1.4.1.4130.10.2.6.1.2.1.1.9 | integer32 | read-only |
The transceiver temperature. |
mIfLwApInfoApAddress | 1.3.6.1.4.1.4130.10.2.6.1.2.1.1.10 | macaddress | read-only |
MAC address of access point this device is linked to. |
mIfLwApInfoIpAddress | 1.3.6.1.4.1.4130.10.2.6.1.2.1.1.11 | inetipaddress | read-only |
IP address of access point this device is linked to. |
mIfLwApInfoConnectedTime | 1.3.6.1.4.1.4130.10.2.6.1.2.1.1.12 | integer32 | read-only |
Time elapsed since link established. |
mIfLwApInfoRssi | 1.3.6.1.4.1.4130.10.2.6.1.2.1.1.13 | integer32 | read-only |
Average received signal strength index. |
mIfLwApInfoSnr | 1.3.6.1.4.1.4130.10.2.6.1.2.1.1.14 | unsigned32 | read-only |
Average error vector magnitude. |
mIfLwApInfoMod | 1.3.6.1.4.1.4130.10.2.6.1.2.1.1.15 | modulationmodetype | read-only |
Last modulation |
mIfLwMacStatsTxSuccess | 1.3.6.1.4.1.4130.10.2.6.1.2.1.1.16 | unsigned32 | read-only |
Successful transmissions. |
mIfLwMacStatsTxQueueFull | 1.3.6.1.4.1.4130.10.2.6.1.2.1.1.17 | unsigned32 | read-only |
Failed transmissions, MAC queue full. |
mIfLwMacStatsTxError | 1.3.6.1.4.1.4130.10.2.6.1.2.1.1.18 | unsigned32 | read-only |
Packets dropped for other reasons. Currently unused. |
mIfLwMacStatsTxRetry | 1.3.6.1.4.1.4130.10.2.6.1.2.1.1.19 | unsigned32 | read-only |
Re-transmission count due to to previously unsuccessful transmission. |
mIfLwMacStatsRxSuccess | 1.3.6.1.4.1.4130.10.2.6.1.2.1.1.20 | unsigned32 | read-only |
Valid packet received. |
mIfLwMacStatsRxError | 1.3.6.1.4.1.4130.10.2.6.1.2.1.1.21 | unsigned32 | read-only |
Valid packet received. |
mIfLwModemStatsTxSuccess | 1.3.6.1.4.1.4130.10.2.6.1.2.1.1.22 | unsigned32 | read-only |
Modem successfully transmitted a packet |
mIfLwModemStatsTxError | 1.3.6.1.4.1.4130.10.2.6.1.2.1.1.23 | unsigned32 | read-only |
Modem failed to transmit a packet |
mIfLwModemStatsRxSuccess | 1.3.6.1.4.1.4130.10.2.6.1.2.1.1.24 | unsigned32 | read-only |
Modem successfully received a packet |
mIfLwModemStatsRxError | 1.3.6.1.4.1.4130.10.2.6.1.2.1.1.25 | unsigned32 | read-only |
Modem failed to receive a packet |
mIfLwLastRssi | 1.3.6.1.4.1.4130.10.2.6.1.2.1.1.26 | integer32 | read-only |
Lasr received signal strength index. |
mIfLwLastSnr | 1.3.6.1.4.1.4130.10.2.6.1.2.1.1.27 | unsigned32 | read-only |
Last error vector magnitude. |
mIfLwLastMod | 1.3.6.1.4.1.4130.10.2.6.1.2.1.1.28 | modulationmodetype | read-only |
Last modulation |
mIfLwLastRate | 1.3.6.1.4.1.4130.10.2.6.1.2.1.1.29 | ratetype | read-only |
Last rate in kbps |
mIfLwActiveNic | 1.3.6.1.4.1.4130.10.2.6.1.2.1.1.30 | truthvalue | read-only |
If nic is active |
mIfLwStatusConnRemTable | 1.3.6.1.4.1.4130.10.2.6.1.2.2 | no-access |
The list of connected remotes. |
|
1.3.6.1.4.1.4130.10.2.6.1.2.2.1 | no-access |
The connected remote status entry. |
||
mIfLwStatusConnRemAddress | 1.3.6.1.4.1.4130.10.2.6.1.2.2.1.1 | macaddress | read-only |
Address of connected remote. |
mIfLwStatusConnRemIpAddress | 1.3.6.1.4.1.4130.10.2.6.1.2.2.1.2 | inetipaddress | read-only |
Ip address of connected remote. |
mIfLwStatusConnRemTimeToLive | 1.3.6.1.4.1.4130.10.2.6.1.2.2.1.3 | unsigned32 | read-only |
Time left until this entry is aged out. |
mIfLwStatusConnRemLinkStatus | 1.3.6.1.4.1.4130.10.2.6.1.2.2.1.4 | linkstatus | read-only |
The status of the connection to a remote device. |
mIfLwStatusConnRemNicId | 1.3.6.1.4.1.4130.10.2.6.1.2.2.1.5 | unsignedshort | read-only |
The RF connection identifier for the connected remote device. |
mIfLwStatusConnRemRssi | 1.3.6.1.4.1.4130.10.2.6.1.2.2.1.6 | integer32 | read-only |
received signal strength index. |
mIfLwStatusConnRemSnr | 1.3.6.1.4.1.4130.10.2.6.1.2.2.1.7 | unsigned32 | read-only |
link quality index. |
mIfLwStatusConnRemMod | 1.3.6.1.4.1.4130.10.2.6.1.2.2.1.8 | modulationmodetype | read-only |
Last modulation |
mIfLwStatusConnRemStatsTxPackets | 1.3.6.1.4.1.4130.10.2.6.1.2.2.1.9 | unsigned32 | read-only |
tx packets |
mIfLwStatusConnRemStatsTxBytes | 1.3.6.1.4.1.4130.10.2.6.1.2.2.1.10 | unsigned32 | read-only |
tx bytes |
mIfLwStatusConnRemStatsRxPackets | 1.3.6.1.4.1.4130.10.2.6.1.2.2.1.11 | unsigned32 | read-only |
rx packets |
mIfLwStatusConnRemStatsRxBytes | 1.3.6.1.4.1.4130.10.2.6.1.2.2.1.12 | unsigned32 | read-only |
rx bytes |
mIfLwStatusConnRemStatsTxError | 1.3.6.1.4.1.4130.10.2.6.1.2.2.1.13 | unsigned32 | read-only |
tx error |
mIfLwStatusConnRemStatsRxError | 1.3.6.1.4.1.4130.10.2.6.1.2.2.1.14 | unsigned32 | read-only |
rx error |
mIfLwStatusConnRemStatsTxDrop | 1.3.6.1.4.1.4130.10.2.6.1.2.2.1.15 | unsigned32 | read-only |
tx drop |
mIfLwStatusConnRemStatsRxDrop | 1.3.6.1.4.1.4130.10.2.6.1.2.2.1.16 | unsigned32 | read-only |
rx drop |
mIfLwStatusConnRemStatsGateway | 1.3.6.1.4.1.4130.10.2.6.1.2.2.1.17 | macaddress | read-only |
The mac address of the next hop |
mIfLwStatusConnRemStatsAllIp | 1.3.6.1.4.1.4130.10.2.6.1.2.2.1.18 | octet string | read-only |
String version of all IP addresses |
mIfLwStatusConnRemStatsName | 1.3.6.1.4.1.4130.10.2.6.1.2.2.1.19 | octet string | read-only |
System name |
mIfLwStatusConnRemStatsAlarmed | 1.3.6.1.4.1.4130.10.2.6.1.2.2.1.20 | truthvalue | read-only |
Is alarmed |
mIfLwStatusConnRemStatsVersion | 1.3.6.1.4.1.4130.10.2.6.1.2.2.1.21 | octet string | read-only |
Host firmware version |
mIfLwStatusConnRemStatsTemp | 1.3.6.1.4.1.4130.10.2.6.1.2.2.1.22 | integer32 | read-only |
System temprature in celsius |
mIfLwStatusConnRemStatsDwnRssi | 1.3.6.1.4.1.4130.10.2.6.1.2.2.1.23 | integer32 | read-only |
Downstream RSSI |
mIfLwStatusConnRemStatsDwnSnr | 1.3.6.1.4.1.4130.10.2.6.1.2.2.1.24 | unsigned32 | read-only |
Downstream SNR |
mIfLwStatusConnRemStatsDwnMod | 1.3.6.1.4.1.4130.10.2.6.1.2.2.1.25 | modulationmodetype | read-only |
Downstream Modulation |
mIfLwStatusEndpointTable | 1.3.6.1.4.1.4130.10.2.6.1.2.3 | no-access |
The list of endpoints. |
|
1.3.6.1.4.1.4130.10.2.6.1.2.3.1 | no-access |
The endpoint status entry. |
||
mIfLwStatusEndpointAddress | 1.3.6.1.4.1.4130.10.2.6.1.2.3.1.1 | macaddress | read-only |
Address of endpoint. |
mIfLwStatusEndpointIpAddress | 1.3.6.1.4.1.4130.10.2.6.1.2.3.1.2 | inetipaddress | read-only |
Ip address of endpoint. |
mIfLwStatusEndpointTimeToLive | 1.3.6.1.4.1.4130.10.2.6.1.2.3.1.3 | unsigned32 | read-only |
Time left until this entry is aged out. |
mIfLwStatusEndpointRemAddress | 1.3.6.1.4.1.4130.10.2.6.1.2.3.1.4 | macaddress | read-only |
The MAC address of the remote device servicing this endpoint. |
mIfLwStatusEndpointStatsTxPackets | 1.3.6.1.4.1.4130.10.2.6.1.2.3.1.5 | unsigned32 | read-only |
tx packets |
mIfLwStatusEndpointStatsTxBytes | 1.3.6.1.4.1.4130.10.2.6.1.2.3.1.6 | unsigned32 | read-only |
tx bytes |
mIfLwStatusEndpointStatsRxPackets | 1.3.6.1.4.1.4130.10.2.6.1.2.3.1.7 | unsigned32 | read-only |
rx packets |
mIfLwStatusEndpointStatsRxBytes | 1.3.6.1.4.1.4130.10.2.6.1.2.3.1.8 | unsigned32 | read-only |
rx bytes |
mIfLwStatusEndpointStatsTxError | 1.3.6.1.4.1.4130.10.2.6.1.2.3.1.9 | unsigned32 | read-only |
tx error |
mIfLwStatusEndpointStatsRxError | 1.3.6.1.4.1.4130.10.2.6.1.2.3.1.10 | unsigned32 | read-only |
rx error |
mIfLwStatusEndpointStatsTxDrop | 1.3.6.1.4.1.4130.10.2.6.1.2.3.1.11 | unsigned32 | read-only |
tx drop |
mIfLwStatusEndpointStatsRxDrop | 1.3.6.1.4.1.4130.10.2.6.1.2.3.1.12 | unsigned32 | read-only |
rx drop |
mdsIfLwMIBConformance | 1.3.6.1.4.1.4130.10.2.6.3 | |||
mdsIfLwMIBCompliances | 1.3.6.1.4.1.4130.10.2.6.3.1 | |||
mIfLwCompliance | 1.3.6.1.4.1.4130.10.2.6.3.1.1 |
The compliance statement for SNMP entities that implement the MDS-IF-LW-MIB. |
||
mdsIfLwMIBGroups | 1.3.6.1.4.1.4130.10.2.6.3.2 | |||
mIfLwStatusGroup | 1.3.6.1.4.1.4130.10.2.6.3.2.1 |
A collection of objects providing information about common LW interface status. |
||
mIfLwStatusConnRemGroup | 1.3.6.1.4.1.4130.10.2.6.3.2.2 |
A collection of objects providing information about connected remotes status. |
||
mIfLwStatusEndpointGroup | 1.3.6.1.4.1.4130.10.2.6.3.2.3 |
A collection of objects providing information about endpoints status. |