MDS-IF-IEEE80211-MIB: View SNMP OID List / Download MIB

VENDOR: MICROWAVE DATA SYSTEMS


 Home MIB: MDS-IF-IEEE80211-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, MDS-ORBIT-SMI-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 mdsIfDot11MIB 1.3.6.1.4.1.4130.10.2.2
The MIB module to describe the IEEE802.11 interface.
     mIfDot11MIBObjects 1.3.6.1.4.1.4130.10.2.2.1
         mIfDot11Config 1.3.6.1.4.1.4130.10.2.2.1.1
         mIfDot11Status 1.3.6.1.4.1.4130.10.2.2.1.2
             mIfDot11StatusTable 1.3.6.1.4.1.4130.10.2.2.1.2.1 no-access
This table contains status of IEEE802.11 interfaces. This table has a sparse dependent relationship on the ifTable. For each entry in this table, there exists an entry in the ifTable.
                 mIfDot11StatusEntry 1.3.6.1.4.1.4130.10.2.2.1.2.1.1 no-access
Each entry contains status of a cellular interface.
                     mIfDot11SerialNumber 1.3.6.1.4.1.4130.10.2.2.1.2.1.1.1 displaystring read-only
IEEE802.11 hardware serial number.
                     mIfDot11Mode 1.3.6.1.4.1.4130.10.2.2.1.2.1.1.2 integer read-only
IEEE802.11 operation mode. Enumeration: 'unknown': 0, 'accessPointStation': 3, 'station': 1, 'accessPoint': 2.
                     mIfDot11TxPower 1.3.6.1.4.1.4130.10.2.2.1.2.1.1.3 unsignedbyte read-only
IEEE802.11 transmit power (dBm).
                     mIfDot11Channel 1.3.6.1.4.1.4130.10.2.2.1.2.1.1.4 unsignedbyte read-only
IEEE802.11 channel
                     mIfDot11StationSsid 1.3.6.1.4.1.4130.10.2.2.1.2.1.1.5 ssid read-only
SSID of access point the unit is connected to
                     mIfDot11StationBssid 1.3.6.1.4.1.4130.10.2.2.1.2.1.1.6 macstring read-only
BSSID of access point the unit is connected to
                     mIfDot11StationRssi 1.3.6.1.4.1.4130.10.2.2.1.2.1.1.7 byte read-only
Received Signal Strength indicator (dBm).
                     mIfDot11StationAuthenticated 1.3.6.1.4.1.4130.10.2.2.1.2.1.1.8 truthvalue read-only
Whether the station has been authenticated by the AP.
                     mIfDot11StationAuthorized 1.3.6.1.4.1.4130.10.2.2.1.2.1.1.9 truthvalue read-only
Whether the station has been authorized by the AP.
                     mIfDot11StationInactive 1.3.6.1.4.1.4130.10.2.2.1.2.1.1.10 unsigned32 read-only
Whether the station is active.
                     mIfDot11StationRxbytes 1.3.6.1.4.1.4130.10.2.2.1.2.1.1.11 unsigned32 read-only
Number of bytes received.
                     mIfDot11StationRxpackets 1.3.6.1.4.1.4130.10.2.2.1.2.1.1.12 unsigned32 read-only
Number of packets received.
                     mIfDot11StationTxbitrate 1.3.6.1.4.1.4130.10.2.2.1.2.1.1.13 unsignedshort read-only
Current RF transmission bit rate.
                     mIfDot11StationTxbytes 1.3.6.1.4.1.4130.10.2.2.1.2.1.1.14 unsigned32 read-only
Number of bytes transmitted.
                     mIfDot11StationTxpackets 1.3.6.1.4.1.4130.10.2.2.1.2.1.1.15 unsigned32 read-only
Number of packets transmitted.
                     mIfDot11StationTxfailed 1.3.6.1.4.1.4130.10.2.2.1.2.1.1.16 unsigned32 read-only
Number of transmissions that failed.
                     mIfDot11StationTxretries 1.3.6.1.4.1.4130.10.2.2.1.2.1.1.17 unsigned32 read-only
Number of transmission retries.
                     mIfDot11ModemType 1.3.6.1.4.1.4130.10.2.2.1.2.1.1.18 integer read-only
Modem type. Enumeration: 'unknown': 0, 'w51': 1, 'w52': 2.
             mIfDot11StatusApTable 1.3.6.1.4.1.4130.10.2.2.1.2.2 no-access
The access point table.
                 mIfDot11StatusApEntry 1.3.6.1.4.1.4130.10.2.2.1.2.2.1 no-access
The Access Point status entry.
                     mIfDot11ApSsid 1.3.6.1.4.1.4130.10.2.2.1.2.2.1.1 ssid read-only
Current BSS SSID/Network name
             mIfDot11StatusApClientTable 1.3.6.1.4.1.4130.10.2.2.1.2.3 no-access
The access point client entry.
                 mIfDot11StatusApClientEntry 1.3.6.1.4.1.4130.10.2.2.1.2.3.1 no-access
The client connected to the AP.
                     mIfDot11ApClientMac 1.3.6.1.4.1.4130.10.2.2.1.2.3.1.1 macstring read-only
The client MAC address.
                     mIfDot11ApClientRssi 1.3.6.1.4.1.4130.10.2.2.1.2.3.1.2 byte read-only
The client RSSI.
                     mIfDot11ApClientAuthenticated 1.3.6.1.4.1.4130.10.2.2.1.2.3.1.3 truthvalue read-only
Whether the client is authenticated.
                     mIfDot11ApClientAuthorized 1.3.6.1.4.1.4130.10.2.2.1.2.3.1.4 truthvalue read-only
Whether the client is authorized.
                     mIfDot11ApClientInactive 1.3.6.1.4.1.4130.10.2.2.1.2.3.1.5 unsigned32 read-only
Whether the client is inactive.
                     mIfDot11ApClientRxbytes 1.3.6.1.4.1.4130.10.2.2.1.2.3.1.6 unsigned32 read-only
Number of bytes received from the client.
                     mIfDot11ApClientRxpackets 1.3.6.1.4.1.4130.10.2.2.1.2.3.1.7 unsigned32 read-only
Number of packets received from the client.
                     mIfDot11ApClientTxbitrate 1.3.6.1.4.1.4130.10.2.2.1.2.3.1.8 unsignedshort read-only
Transmission bit rate at which the client is connected to AP.
                     mIfDot11ApClientTxbytes 1.3.6.1.4.1.4130.10.2.2.1.2.3.1.9 unsigned32 read-only
Number of bytes transmitted to the client.
                     mIfDot11ApClientTxpackets 1.3.6.1.4.1.4130.10.2.2.1.2.3.1.10 unsigned32 read-only
Number of packets transmitted to the client.
                     mIfDot11ApClientTxfailed 1.3.6.1.4.1.4130.10.2.2.1.2.3.1.11 unsigned32 read-only
Number of transmissions to the client that failed.
                     mIfDot11ApClientTxretries 1.3.6.1.4.1.4130.10.2.2.1.2.3.1.12 unsigned32 read-only
Number of transmission retries to the client.
     mdsIfDot11MIBConformance 1.3.6.1.4.1.4130.10.2.2.3
         mdsIfDot11MIBCompliances 1.3.6.1.4.1.4130.10.2.2.3.1
             mIfDot11Compliance 1.3.6.1.4.1.4130.10.2.2.3.1.1
The compliance statement for SNMP entities that implement the MDS-IF-IEEE80211-MIB.
         mdsIfDot11MIBGroups 1.3.6.1.4.1.4130.10.2.2.3.2
             mIfDot11StatusCommonGroup 1.3.6.1.4.1.4130.10.2.2.3.2.1
A collection of objects providing information about common IEEE802.11 interface status.
             mIfDot11StatusStationGroup 1.3.6.1.4.1.4130.10.2.2.3.2.2
A collection of objects providing information about IEEE802.11 interface status in station mode.
             mIfDot11StatusApGroup 1.3.6.1.4.1.4130.10.2.2.3.2.3
A collection of objects providing information about IEEE802.11 interface status in Access Point mode.