MBG-SNMP-LT-MIB: View SNMP OID List / Download MIB

VENDOR: MEINBERG


 Home MIB: MBG-SNMP-LT-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, MBG-SNMP-ROOT-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 mbgLantime 1.3.6.1.4.1.5597.3
Meinberg SNMP Management Information Base
     mbgLtInfo 1.3.6.1.4.1.5597.3.0
         mbgLtFirmwareVersion 1.3.6.1.4.1.5597.3.0.1 displaystring read-only
shows the installed firmware version of your LANTIME
         mbgLtFirmwareVersionVal 1.3.6.1.4.1.5597.3.0.2 integer32 read-only
shows the installed firmware version of your LANTIME as an Integer32 value
     mbgLtNtp 1.3.6.1.4.1.5597.3.1
         mbgLtNtpCurrentState 1.3.6.1.4.1.5597.3.1.1 displaystring read-only
actual state of the NTP as string
         mbgLtNtpCurrentStateVal 1.3.6.1.4.1.5597.3.1.2 integer read-only
current state of the NTP as Integer32 value Enumeration: 'normalOperationRefclock': 5, 'noGoodRefclock': 1, 'unknown': 99, 'notSynchronized': 0, 'normalOperationPPS': 4, 'syncToExtRefclock': 2, 'syncToSerialRefclock': 3.
         mbgLtNtpStratum 1.3.6.1.4.1.5597.3.1.3 integer32 read-only
Stratum value of the NTP
         mbgLtNtpActiveRefclockId 1.3.6.1.4.1.5597.3.1.4 integer read-only
Index of the current refclock selected by the NTP Enumeration: 'pps': 2, 'externalRefclock': 3, 'notSync': 99, 'serialRefclock': 1, 'localClock': 0.
         mbgLtNtpActiveRefclockName 1.3.6.1.4.1.5597.3.1.5 displaystring read-only
Name of the current refclock selected by the NTP
         mbgLtNtpActiveRefclockOffset 1.3.6.1.4.1.5597.3.1.6 displaystring read-only
Time offset between the current selected refclock and time of NTP as string
         mbgLtNtpActiveRefclockOffsetVal 1.3.6.1.4.1.5597.3.1.7 integer32 read-only
Time offset in micro seconds between the current selected refclock and time of NTP
         mbgLtNtpNumberOfRefclocks 1.3.6.1.4.1.5597.3.1.8 integer32 read-only
Number of refclocks configured in the NTP
         mbgLtNtpAuthKeyId 1.3.6.1.4.1.5597.3.1.9 integer32 read-only
Authentication Key ID of active refclock is active
         mbgLtNtpVersion 1.3.6.1.4.1.5597.3.1.10 displaystring read-only
integrated NTP version
     mbgLtRefclock 1.3.6.1.4.1.5597.3.2
         mbgLtRefClockType 1.3.6.1.4.1.5597.3.2.1 displaystring read-only
Type of refclock connected to NTP time server
         mbgLtRefClockTypeVal 1.3.6.1.4.1.5597.3.2.2 integer read-only
Type of refclock connected to NTP time server as value Enumeration: 'mbgNDT167BGT': 18, 'mbgRDTBGTTGP': 12, 'mbgDCT': 19, 'mbgEDTBGTTGP': 14, 'mbgAHS': 15, 'mbgTCR509BGTTGP': 10, 'mbgNDT167': 17, 'mbgSHSBGT': 6, 'mbgRDT': 11, 'mbgEDT': 13, 'mbgGPS167': 1, 'mbgSHS': 5, 'mbgDHS': 16, 'mbgSHSFRCBGT': 8, 'mbgSHSTCR': 21, 'mbgSHSTCRBGT': 22, 'mbgTCR509': 9, 'mbgDCTBGT': 20, 'mbgPZF509BGTTGP': 4, 'mbgSHSFRC': 7, 'notavailable': 0, 'mbgPZF509': 3, 'mbgGPS167BGTTGP': 2.
         mbgLtRefClockMode 1.3.6.1.4.1.5597.3.2.3 displaystring read-only
current mode of refclock connected to NTP time server
         mbgLtRefClockModeVal 1.3.6.1.4.1.5597.3.2.4 integer read-only
current mode of refclock connected to NTP time server as value Enumeration: 'antennaFaulty': 3, 'trackingSearching': 2, 'coldBoot': 5, 'notavailable': 0, 'normalOperation': 1, 'antennaShortcircuit': 6, 'warmBoot': 4.
         mbgLtRefGpsState 1.3.6.1.4.1.5597.3.2.5 displaystring read-only
current State of GPS refclock conneted to NTP time server
         mbgLtRefGpsStateVal 1.3.6.1.4.1.5597.3.2.6 integer read-only
current State of GPS refclock conneted to NTP time server as value Enumeration: 'notavailable': 0, 'notsynchronized': 2, 'synchronized': 1.
         mbgLtRefGpsPosition 1.3.6.1.4.1.5597.3.2.7 displaystring read-only
current Position of GPS refclock conneted to NTP time server
         mbgLtRefGpsSatellites 1.3.6.1.4.1.5597.3.2.8 displaystring read-only
current Satellites in view and good of GPS refclock connected to NTP time server
         mbgLtRefGpsSatellitesGood 1.3.6.1.4.1.5597.3.2.9 integer32 read-only
current good Satellites of GPS refclock connected to NTP time server as value
         mbgLtRefGpsSatellitesInView 1.3.6.1.4.1.5597.3.2.10 integer32 read-only
current Satellites in view of GPS refclock conneted to NTP time server as value
         mbgLtRefPzfState 1.3.6.1.4.1.5597.3.2.11 displaystring read-only
current State of DCF77/PZF refclock connected to NTP time server
         mbgLtRefPzfStateVal 1.3.6.1.4.1.5597.3.2.12 integer read-only
current State of DCF77/PZF refclock connected to NTP time server as value Enumeration: 'notavailable': 0, 'notsyncnow': 2, 'neversynced': 3, 'sync': 1.
         mbgLtRefPzfKorrelation 1.3.6.1.4.1.5597.3.2.13 integer32 read-only
current Korrelation of DCF77/PZF refclock connected to NTP time server
         mbgLtRefPzfField 1.3.6.1.4.1.5597.3.2.14 integer32 read-only
current strength of field of DCF77/PZF refclock connected to NTP time server
         mbgLtRefGpsMode 1.3.6.1.4.1.5597.3.2.15 displaystring read-only
current Mode of GPS refclock connected to NTP time server
         mbgLtRefGpsModeVal 1.3.6.1.4.1.5597.3.2.16 integer read-only
current Mode of GPS refclock connected to NTP time server as value Enumeration: 'antennaFaulty': 3, 'trackingSearching': 2, 'coldBoot': 5, 'notavailable': 0, 'normalOperation': 1, 'antennaShortcircuit': 6, 'warmBoot': 4.
         mbgLtRefIrigMode 1.3.6.1.4.1.5597.3.2.17 displaystring read-only
current Mode of IRIG refclock conneted to NTP time server
         mbgLtRefIrigModeVal 1.3.6.1.4.1.5597.3.2.18 integer read-only
current Mode of IRIG refclock conneted to NTP time server as value Enumeration: 'notavailable': 0, 'notlocked': 2, 'telegramError': 3, 'locked': 1.
         mbgLtRefPzfMode 1.3.6.1.4.1.5597.3.2.19 displaystring read-only
current Mode of PZF refclock connected to NTP time server
         mbgLtRefPzfModeVal 1.3.6.1.4.1.5597.3.2.20 integer read-only
current Mode of PZF refclock connected to NTP time server as value Enumeration: 'notavailable': 0, 'antennaFaulty': 2, 'normalOperation': 1.
         mbgLtRefIrigState 1.3.6.1.4.1.5597.3.2.21 displaystring read-only
current State of IRIG refclock connected to NTP time server
         mbgLtRefIrigStateVal 1.3.6.1.4.1.5597.3.2.22 integer32 read-only
current State of IRIG refclock connected to NTP time server as value
         mbgLtRefSHSMode 1.3.6.1.4.1.5597.3.2.23 displaystring read-only
current Mode of SHS system connected to NTP time server
         mbgLtRefSHSModeVal 1.3.6.1.4.1.5597.3.2.24 integer read-only
current Mode of SHS system connected to NTP time server as value Enumeration: 'notavailable': 0, 'stoppedTimeLimitError': 2, 'normalOperation': 1.
         mbgLtRefSHSTimeDiff 1.3.6.1.4.1.5597.3.2.25 integer32 read-only
current time difference between the two SHS reference time sources in miliseconds
         mbgLtRefDctState 1.3.6.1.4.1.5597.3.2.26 displaystring read-only
current State of DCF77 refclock connected to NTP time server
         mbgLtRefDctStateVal 1.3.6.1.4.1.5597.3.2.27 integer read-only
current State of DCF77 refclock connected to NTP time server as value Enumeration: 'notavailable': 0, 'notsyncnow': 2, 'neversynced': 3, 'sync': 1.
         mbgLtRefDctField 1.3.6.1.4.1.5597.3.2.28 displaystring read-only
current strength of field of DCF77 refclock connected to NTP time server
         mbgLtRefDctMode 1.3.6.1.4.1.5597.3.2.29 displaystring read-only
current Mode of DCF77 refclock connected to NTP time server
         mbgLtRefDctModeVal 1.3.6.1.4.1.5597.3.2.30 integer read-only
current Mode of DCF77 refclock connected to NTP time server as value Enumeration: 'notavailable': 0, 'antennaFaulty': 2, 'normalOperation': 1.
         mbgLtRefGpsLeapSecond 1.3.6.1.4.1.5597.3.2.31 displaystring read-only
Date and Time of leap second announcement received via GPS
         mbgLtRefGpsLeapCorrection 1.3.6.1.4.1.5597.3.2.32 integer32 read-only
Leap Second Correction received via GPS
         mbgLtMrs 1.3.6.1.4.1.5597.3.2.50
               mbgLtRefMrsRef 1.3.6.1.4.1.5597.3.2.50.1 displaystring read-only
ID of currently active reference source as a string
               mbgLtRefMrsRefVal 1.3.6.1.4.1.5597.3.2.50.2 integer read-only
currently active reference as a value Enumeration: 'refIrig': 2, 'refPtp': 5, 'refPps': 3, 'refNtp': 6, 'refFreq': 4, 'refFreeRun': 99, 'notavailable': 0, 'refGps': 1.
               mbgLtRefMrsRefList 1.3.6.1.4.1.5597.3.2.50.3 displaystring read-only
List of all supported MRS references in a comma separated list
               mbgLtRefMrsPrioList 1.3.6.1.4.1.5597.3.2.50.4 displaystring read-only
List of all active MRS references in a comma separated list sorted by priority
               mbgLtMrsRef 1.3.6.1.4.1.5597.3.2.50.10
                     mbgLtMrsRefGps 1.3.6.1.4.1.5597.3.2.50.10.1
                         mbgLtMrsGpsOffs 1.3.6.1.4.1.5597.3.2.50.10.1.1 displaystring read-only
Offset of this reference to the currently active reference, unit included in the string
                         mbgLtMrsGpsOffsVal 1.3.6.1.4.1.5597.3.2.50.10.1.2 integer32 read-only
Offset of this reference to the currently active reference, unit see below
                         mbgLtMrsGpsOffsBase 1.3.6.1.4.1.5597.3.2.50.10.1.3 integer read-only
base of the offset value shown in mbgLtMrsGpsOffsVal Enumeration: 'baseMicroseconds': 6, 'baseNanoseconds': 9, 'baseMiliseconds': 3, 'baseSeconds': 0.
                         mbgLtMrsGpsPrio 1.3.6.1.4.1.5597.3.2.50.10.1.4 integer32 read-only
the configured priority of this reference
                         mbgLtMrsGpsState 1.3.6.1.4.1.5597.3.2.50.10.1.5 displaystring read-only
the current status of this reference as a string
                         mbgLtMrsGpsStateVal 1.3.6.1.4.1.5597.3.2.50.10.1.6 integer read-only
the current status of this reference as an Integer value Enumeration: 'isAccurate': 6, 'isMaster': 7, 'hasLocked': 4, 'notConnected': 2, 'noSignal': 3, 'notAvailable': 0, 'isAvailable': 5, 'notSupported': 1.
                         mbgLtMrsGpsPrecision 1.3.6.1.4.1.5597.3.2.50.10.1.7 integer32 read-write
Precision Factor of this reference in nanoseconds
                     mbgLtMrsRefIrig 1.3.6.1.4.1.5597.3.2.50.10.2
                         mbgLtMrsIrigOffs 1.3.6.1.4.1.5597.3.2.50.10.2.1 displaystring read-only
Offset of this reference to the currently active reference, unit included in the string
                         mbgLtMrsIrigOffsVal 1.3.6.1.4.1.5597.3.2.50.10.2.2 integer32 read-only
Offset of this reference to the currently active reference, unit see below
                         mbgLtMrsIrigOffsBase 1.3.6.1.4.1.5597.3.2.50.10.2.3 integer read-only
base of the offset value shown in mbgLtMrsIrigOffsVal Enumeration: 'baseMicroseconds': 6, 'baseNanoseconds': 9, 'baseMiliseconds': 3, 'baseSeconds': 0.
                         mbgLtMrsIrigPrio 1.3.6.1.4.1.5597.3.2.50.10.2.4 integer32 read-only
the configured priority of this reference
                         mbgLtMrsIrigState 1.3.6.1.4.1.5597.3.2.50.10.2.5 displaystring read-only
the current status of this reference as a string
                         mbgLtMrsIrigStateVal 1.3.6.1.4.1.5597.3.2.50.10.2.6 integer read-only
the current status of this reference as an Integer value Enumeration: 'isAccurate': 6, 'isMaster': 7, 'hasLocked': 4, 'notConnected': 2, 'noSignal': 3, 'notAvailable': 0, 'isAvailable': 5, 'notSupported': 1.
                         mbgLtMrsIrigCorr 1.3.6.1.4.1.5597.3.2.50.10.2.7 integer32 read-write
Correction Value (Fixed Offset) of this reference in nanoseconds
                         mbgLtMrsIrigOffsLimit 1.3.6.1.4.1.5597.3.2.50.10.2.8 integer32 read-write
Offset Limit in nanoseconds, if exceeded this will trigger a notification
                         mbgLtMrsIrigPrecision 1.3.6.1.4.1.5597.3.2.50.10.2.9 integer32 read-write
Precision Factor of this reference in nanoseconds
                     mbgLtMrsRefPps 1.3.6.1.4.1.5597.3.2.50.10.3
                         mbgLtMrsPpsOffs 1.3.6.1.4.1.5597.3.2.50.10.3.1 displaystring read-only
Offset of this reference to the currently active reference, unit included in the string
                         mbgLtMrsPpsOffsVal 1.3.6.1.4.1.5597.3.2.50.10.3.2 integer32 read-only
Offset of this reference to the currently active reference, unit see below
                         mbgLtMrsPpsOffsBase 1.3.6.1.4.1.5597.3.2.50.10.3.3 integer read-only
base of the offset value shown in mbgLtMrsPpsOffsVal Enumeration: 'baseMicroseconds': 6, 'baseNanoseconds': 9, 'baseMiliseconds': 3, 'baseSeconds': 0.
                         mbgLtMrsPpsPrio 1.3.6.1.4.1.5597.3.2.50.10.3.4 integer32 read-only
the configured priority of this reference
                         mbgLtMrsPpsState 1.3.6.1.4.1.5597.3.2.50.10.3.5 displaystring read-only
the current status of this reference as a string
                         mbgLtMrsPpsStateVal 1.3.6.1.4.1.5597.3.2.50.10.3.6 integer read-only
the current status of this reference as an Integer value Enumeration: 'isAccurate': 6, 'isMaster': 7, 'hasLocked': 4, 'notConnected': 2, 'noSignal': 3, 'notAvailable': 0, 'isAvailable': 5, 'notSupported': 1.
                         mbgLtMrsPpsCorr 1.3.6.1.4.1.5597.3.2.50.10.3.7 integer32 read-write
Correction Value (Fixed Offset) of this reference in nanoseconds
                         mbgLtMrsPpsOffsLimit 1.3.6.1.4.1.5597.3.2.50.10.3.8 integer32 read-write
Offset Limit in nanoseconds, if exceeded this will trigger a notification
                         mbgLtMrsPpsPrecision 1.3.6.1.4.1.5597.3.2.50.10.3.9 integer32 read-write
Precision Factor of this reference in nanoseconds
                     mbgLtMrsRefFreq 1.3.6.1.4.1.5597.3.2.50.10.4
                         mbgLtMrsFreqOffs 1.3.6.1.4.1.5597.3.2.50.10.4.1 displaystring read-only
Offset of this reference to the currently active reference, unit included in the string
                         mbgLtMrsFreqOffsVal 1.3.6.1.4.1.5597.3.2.50.10.4.2 integer32 read-only
Offset of this reference to the currently active reference, unit see below
                         mbgLtMrsFreqOffsBase 1.3.6.1.4.1.5597.3.2.50.10.4.3 integer read-only
base of the offset value shown in mbgLtMrsFreqOffsVal Enumeration: 'baseMicroseconds': 6, 'baseNanoseconds': 9, 'baseMiliseconds': 3, 'baseSeconds': 0.
                         mbgLtMrsFreqPrio 1.3.6.1.4.1.5597.3.2.50.10.4.4 integer32 read-only
the configured priority of this reference
                         mbgLtMrsFreqState 1.3.6.1.4.1.5597.3.2.50.10.4.5 displaystring read-only
the current status of this reference as a string
                         mbgLtMrsFreqStateVal 1.3.6.1.4.1.5597.3.2.50.10.4.6 integer read-only
the current status of this reference as an Integer value Enumeration: 'isAccurate': 6, 'isMaster': 7, 'hasLocked': 4, 'notConnected': 2, 'noSignal': 3, 'notAvailable': 0, 'isAvailable': 5, 'notSupported': 1.
                         mbgLtMrsFreqCorr 1.3.6.1.4.1.5597.3.2.50.10.4.7 integer32 read-write
Correction Value (Fixed Offset) of this reference in nanoseconds
                         mbgLtMrsFreqOffsLimit 1.3.6.1.4.1.5597.3.2.50.10.4.8 integer32 read-write
Offset Limit in nanoseconds, if exceeded this will trigger a notification
                         mbgLtMrsFreqPrecision 1.3.6.1.4.1.5597.3.2.50.10.4.9 integer32 read-write
Precision Factor of this reference in nanoseconds
                     mbgLtMrsRefPtp 1.3.6.1.4.1.5597.3.2.50.10.5
                         mbgLtMrsPtpOffs 1.3.6.1.4.1.5597.3.2.50.10.5.1 displaystring read-only
Offset of this reference to the currently active reference, unit included in the string
                         mbgLtMrsPtpOffsVal 1.3.6.1.4.1.5597.3.2.50.10.5.2 integer32 read-only
Offset of this reference to the currently active reference, unit see below
                         mbgLtMrsPtpOffsBase 1.3.6.1.4.1.5597.3.2.50.10.5.3 integer read-only
base of the offset value shown in mbgLtMrsPtpOffsVal Enumeration: 'baseMicroseconds': 6, 'baseNanoseconds': 9, 'baseMiliseconds': 3, 'baseSeconds': 0.
                         mbgLtMrsPtpPrio 1.3.6.1.4.1.5597.3.2.50.10.5.4 integer32 read-only
the configured priority of this reference
                         mbgLtMrsPtpState 1.3.6.1.4.1.5597.3.2.50.10.5.5 displaystring read-only
the current status of this reference as a string
                         mbgLtMrsPtpStateVal 1.3.6.1.4.1.5597.3.2.50.10.5.6 integer read-only
the current status of this reference as an Integer value Enumeration: 'isAccurate': 6, 'isMaster': 7, 'hasLocked': 4, 'notConnected': 2, 'noSignal': 3, 'notAvailable': 0, 'isAvailable': 5, 'notSupported': 1.
                         mbgLtMrsPtpCorr 1.3.6.1.4.1.5597.3.2.50.10.5.7 integer32 read-write
Correction Value (Fixed Offset) of this reference in nanoseconds
                         mbgLtMrsPtpOffsLimit 1.3.6.1.4.1.5597.3.2.50.10.5.8 integer32 read-write
Offset Limit in nanoseconds, if exceeded this will trigger a notification
                         mbgLtMrsPtpPrecision 1.3.6.1.4.1.5597.3.2.50.10.5.9 integer32 read-write
Precision Factor of this reference in nanoseconds
                     mbgLtMrsRefNtp 1.3.6.1.4.1.5597.3.2.50.10.6
                         mbgLtMrsNtpOffs 1.3.6.1.4.1.5597.3.2.50.10.6.1 displaystring read-only
Offset of this reference to the currently active reference, unit included in the string
                         mbgLtMrsNtpOffsVal 1.3.6.1.4.1.5597.3.2.50.10.6.2 integer32 read-only
Offset of this reference to the currently active reference, unit see below
                         mbgLtMrsNtpOffsBase 1.3.6.1.4.1.5597.3.2.50.10.6.3 integer read-only
base of the offset value shown in mbgLtMrsNtpOffsVal Enumeration: 'baseMicroseconds': 6, 'baseNanoseconds': 9, 'baseMiliseconds': 3, 'baseSeconds': 0.
                         mbgLtMrsNtpPrio 1.3.6.1.4.1.5597.3.2.50.10.6.4 integer32 read-only
the configured priority of this reference
                         mbgLtMrsNtpState 1.3.6.1.4.1.5597.3.2.50.10.6.5 displaystring read-only
the current status of this reference as a string
                         mbgLtMrsNtpStateVal 1.3.6.1.4.1.5597.3.2.50.10.6.6 integer read-only
the current status of this reference as an Integer value Enumeration: 'isAccurate': 6, 'isMaster': 7, 'hasLocked': 4, 'notConnected': 2, 'noSignal': 3, 'notAvailable': 0, 'isAvailable': 5, 'notSupported': 1.
                         mbgLtMrsNtpCorr 1.3.6.1.4.1.5597.3.2.50.10.6.7 integer32 read-write
Correction Value (Fixed Offset) of this reference in nanoseconds
                         mbgLtMrsNtpOffsLimit 1.3.6.1.4.1.5597.3.2.50.10.6.8 integer32 read-write
Offset Limit in nanoseconds, if exceeded this will trigger a notification
                         mbgLtMrsNtpPrecision 1.3.6.1.4.1.5597.3.2.50.10.6.9 integer32 read-write
Precision Factor of this reference in nanoseconds
     mbgLtNotifications 1.3.6.1.4.1.5597.3.3
         mbgLtTraps 1.3.6.1.4.1.5597.3.3.0
             mbgLtTrapNTPNotSync 1.3.6.1.4.1.5597.3.3.0.1
trap to be sent when NTP is not synchronised
             mbgLtTrapNTPStopped 1.3.6.1.4.1.5597.3.3.0.2
trap to be sent when NTP is stopped
             mbgLtTrapServerBoot 1.3.6.1.4.1.5597.3.3.0.3
trap to be sent when time server has finished boot sequence
             mbgLtTrapReceiverNotResponding 1.3.6.1.4.1.5597.3.3.0.4
trap to be sent when receiver is not responding
             mbgLtTrapReceiverNotSync 1.3.6.1.4.1.5597.3.3.0.5
trap to be sent when receiver is not synchronised
             mbgLtTrapAntennaFaulty 1.3.6.1.4.1.5597.3.3.0.6
trap to be sent when connection to antenna is broken
             mbgLtTrapAntennaReconnect 1.3.6.1.4.1.5597.3.3.0.7
trap to be sent when antenna has been reconnected
             mbgLtTrapConfigChanged 1.3.6.1.4.1.5597.3.3.0.8
trap to be sent when timeserver reloaded its configuration
             mbgLtTrapLeapSecondAnnounced 1.3.6.1.4.1.5597.3.3.0.9
trap to be sent when a leap second has been announced
             mbgLtTrapSHSTimeLimitError 1.3.6.1.4.1.5597.3.3.0.10
trap to be sent when SHS timelimit exceeded
             mbgLtTrapSecondaryRecNotSync 1.3.6.1.4.1.5597.3.3.0.11
trap to be sent when secondary receiver in SHS system is not synchronised
             mbgLtTrapPowerSupplyFailure 1.3.6.1.4.1.5597.3.3.0.12
trap to be sent when one of the redundant power supplies fails
             mbgLtTrapAntennaShortCircuit 1.3.6.1.4.1.5597.3.3.0.13
trap to be sent when a connected antenna fails due to a short circuit
             mbgLtTrapReceiverSync 1.3.6.1.4.1.5597.3.3.0.14
trap to be sent when receiver is synchronised
             mbgLtTrapNTPClientAlarm 1.3.6.1.4.1.5597.3.3.0.15
trap to be sent when an NTP Client Monitoring alarm occurs, e.g. when a monitored client is not reachable.
             mbgLtTrapPowerSupplyUp 1.3.6.1.4.1.5597.3.3.0.16
trap to be sent when a power supply returned to a healthy state.
             mbgLtTrapNetworkDown 1.3.6.1.4.1.5597.3.3.0.17
trap to be sent when a monitored network port is down.
             mbgLtTrapNetworkUp 1.3.6.1.4.1.5597.3.3.0.18
trap to be sent when a monitored network port is up.
             mbgLtTrapSecondaryRecNotResp 1.3.6.1.4.1.5597.3.3.0.19
trap to be sent when secondary receiver is not responding
             mbgLtTrapXmrLimitExceeded 1.3.6.1.4.1.5597.3.3.0.30
trap to be sent when a reference offset exceeds the configured limit
             mbgLtTrapXmrRefDisconnect 1.3.6.1.4.1.5597.3.3.0.31
trap to be sent when a reference signal has been lost
             mbgLtTrapXmrRefReconnect 1.3.6.1.4.1.5597.3.3.0.32
trap to be sent when a reference signal recovered
             mbgLtTrapFdmError 1.3.6.1.4.1.5597.3.3.0.33
trap to be sent when the Fdm module generates an alarm
             mbgLtTrapSHSTimeLimitWarning 1.3.6.1.4.1.5597.3.3.0.34
trap to be sent when SHS warning limit exceeded
             mbgLtTrapSecondaryRecSync 1.3.6.1.4.1.5597.3.3.0.35
trap to be sent when secondary receiver is synchronised
             mbgLtTrapNTPSync 1.3.6.1.4.1.5597.3.3.0.36
trap to be sent when NTP is synchronised
             mbgLtTrapPtpPortDisconnected 1.3.6.1.4.1.5597.3.3.0.37
trap to be sent when PTP network port got disconnected
             mbgLtTrapPtpPortConnected 1.3.6.1.4.1.5597.3.3.0.38
trap to be sent when PTP network port got connected
             mbgLtTrapPtpStateChanged 1.3.6.1.4.1.5597.3.3.0.39
trap to be sent when PTP state changed (e.g. from 'passive' to 'master')
             mbgLtTrapPtpError 1.3.6.1.4.1.5597.3.3.0.40
trap to be sent when PTP raised an error
             mbgLtTrapNormalOperation 1.3.6.1.4.1.5597.3.3.0.77
trap to be sent when the system returned to a healthy state
             mbgLtTrapHeartbeat 1.3.6.1.4.1.5597.3.3.0.88
trap to be sent periodically to indicate that time server is still alive
             mbgLtTrapTestNotification 1.3.6.1.4.1.5597.3.3.0.99
trap to be sent when a test notification has been requested
             mbgLtTrapMessage 1.3.6.1.4.1.5597.3.3.0.100 displaystring read-only
used as a payload object for all traps, holds a clear text event message
     mbgLtCfg 1.3.6.1.4.1.5597.3.4
         mbgLtCfgNetwork 1.3.6.1.4.1.5597.3.4.1
             mbgLtCfgHostname 1.3.6.1.4.1.5597.3.4.1.1 displaystring read-write
The hostname configured for this LANTIME
             mbgLtCfgDomainname 1.3.6.1.4.1.5597.3.4.1.2 displaystring read-write
The domainname configured for this LANTIME
             mbgLtCfgNameserver1 1.3.6.1.4.1.5597.3.4.1.3 displaystring read-write
The first nameserver used by this LANTIME
             mbgLtCfgNameserver2 1.3.6.1.4.1.5597.3.4.1.4 displaystring read-write
The second nameserver used this LANTIME
             mbgLtCfgSyslogserver1 1.3.6.1.4.1.5597.3.4.1.5 displaystring read-write
The first syslog server we are sending log entries to
             mbgLtCfgSyslogserver2 1.3.6.1.4.1.5597.3.4.1.6 displaystring read-write
The second syslog server we are sending log entries to
             mbgLtCfgTelnetAccess 1.3.6.1.4.1.5597.3.4.1.7 integer read-write
Is telnet administration enabled Enumeration: 'disabled': 0, 'enabled': 1.
             mbgLtCfgFTPAccess 1.3.6.1.4.1.5597.3.4.1.8 integer read-write
Is FTP administration enabled Enumeration: 'disabled': 0, 'enabled': 1.
             mbgLtCfgHTTPAccess 1.3.6.1.4.1.5597.3.4.1.9 integer read-write
Is web based administration enabled Enumeration: 'disabled': 0, 'enabled': 1.
             mbgLtCfgHTTPSAccess 1.3.6.1.4.1.5597.3.4.1.10 integer read-write
Is secure web based administration enabled Enumeration: 'disabled': 0, 'enabled': 1.
             mbgLtCfgSNMPAccess 1.3.6.1.4.1.5597.3.4.1.11 integer read-write
Is SNMP administration enabled Enumeration: 'disabled': 0, 'enabled': 1.
             mbgLtCfgSambaAccess 1.3.6.1.4.1.5597.3.4.1.12 integer read-write
Is Samba administration enabled Enumeration: 'disabled': 0, 'enabled': 1.
             mbgLtCfgIPv6Access 1.3.6.1.4.1.5597.3.4.1.13 integer read-write
Is IPv6 support enabled Enumeration: 'disabled': 0, 'enabled': 1.
             mbgLtCfgSSHAccess 1.3.6.1.4.1.5597.3.4.1.14 integer read-write
Is SSH administration enabled Enumeration: 'disabled': 0, 'enabled': 1.
         mbgLtCfgNTP 1.3.6.1.4.1.5597.3.4.2
             mbgLtCfgNTPServer1 1.3.6.1.4.1.5597.3.4.2.1
                 mbgLtCfgNTPServer1IP 1.3.6.1.4.1.5597.3.4.2.1.1 displaystring read-write
IP address for external NTP server
                 mbgLtCfgNTPServer1Key 1.3.6.1.4.1.5597.3.4.2.1.2 integer32 read-write
Key for external NTP server
                 mbgLtCfgNTPServer1Autokey 1.3.6.1.4.1.5597.3.4.2.1.3 integer read-write
Is autokey enabled for the external NTP server Enumeration: 'disabled': 0, 'enabled': 1.
                 mbgLtCfgNTPServer1Prefer 1.3.6.1.4.1.5597.3.4.2.1.4 integer read-write
Is the preferred flag enabled for the external NTP server Enumeration: 'disabled': 0, 'enabled': 1.
             mbgLtCfgNTPServer2 1.3.6.1.4.1.5597.3.4.2.2
                 mbgLtCfgNTPServer2IP 1.3.6.1.4.1.5597.3.4.2.2.1 displaystring read-write
IP address for external NTP server
                 mbgLtCfgNTPServer2Key 1.3.6.1.4.1.5597.3.4.2.2.2 integer32 read-write
Key for external NTP server
                 mbgLtCfgNTPServer2Autokey 1.3.6.1.4.1.5597.3.4.2.2.3 integer read-write
Is autokey enabled for the external NTP server Enumeration: 'disabled': 0, 'enabled': 1.
                 mbgLtCfgNTPServer2Prefer 1.3.6.1.4.1.5597.3.4.2.2.4 integer read-write
Is the preferred flag enabled for the external NTP server Enumeration: 'disabled': 0, 'enabled': 1.
             mbgLtCfgNTPServer3 1.3.6.1.4.1.5597.3.4.2.3
                 mbgLtCfgNTPServer3IP 1.3.6.1.4.1.5597.3.4.2.3.1 displaystring read-write
IP address for external NTP server
                 mbgLtCfgNTPServer3Key 1.3.6.1.4.1.5597.3.4.2.3.2 integer32 read-write
Key for external NTP server
                 mbgLtCfgNTPServer3Autokey 1.3.6.1.4.1.5597.3.4.2.3.3 integer read-write
Is autokey enabled for the external NTP server Enumeration: 'disabled': 0, 'enabled': 1.
                 mbgLtCfgNTPServer3Prefer 1.3.6.1.4.1.5597.3.4.2.3.4 integer read-write
Is the preferred flag enabled for the external NTP server Enumeration: 'disabled': 0, 'enabled': 1.
             mbgLtCfgNTPServer4 1.3.6.1.4.1.5597.3.4.2.4
                 mbgLtCfgNTPServer4IP 1.3.6.1.4.1.5597.3.4.2.4.1 displaystring read-write
IP address for external NTP server
                 mbgLtCfgNTPServer4Key 1.3.6.1.4.1.5597.3.4.2.4.2 integer32 read-write
Key for external NTP server
                 mbgLtCfgNTPServer4Autokey 1.3.6.1.4.1.5597.3.4.2.4.3 integer read-write
Is autokey enabled for the external NTP server Enumeration: 'disabled': 0, 'enabled': 1.
                 mbgLtCfgNTPServer4Prefer 1.3.6.1.4.1.5597.3.4.2.4.4 integer read-write
Is the preferred flag enabled for the external NTP server Enumeration: 'disabled': 0, 'enabled': 1.
             mbgLtCfgNTPServer5 1.3.6.1.4.1.5597.3.4.2.5
                 mbgLtCfgNTPServer5IP 1.3.6.1.4.1.5597.3.4.2.5.1 displaystring read-write
IP address for external NTP server
                 mbgLtCfgNTPServer5Key 1.3.6.1.4.1.5597.3.4.2.5.2 integer32 read-write
Key for external NTP server
                 mbgLtCfgNTPServer5Autokey 1.3.6.1.4.1.5597.3.4.2.5.3 integer read-write
Is autokey enabled for the external NTP server Enumeration: 'disabled': 0, 'enabled': 1.
                 mbgLtCfgNTPServer5Prefer 1.3.6.1.4.1.5597.3.4.2.5.4 integer read-write
Is the preferred flag enabled for the external NTP server Enumeration: 'disabled': 0, 'enabled': 1.
             mbgLtCfgNTPServer6 1.3.6.1.4.1.5597.3.4.2.6
                 mbgLtCfgNTPServer6IP 1.3.6.1.4.1.5597.3.4.2.6.1 displaystring read-write
IP address for external NTP server
                 mbgLtCfgNTPServer6Key 1.3.6.1.4.1.5597.3.4.2.6.2 integer32 read-write
Key for external NTP server
                 mbgLtCfgNTPServer6Autokey 1.3.6.1.4.1.5597.3.4.2.6.3 integer read-write
Is autokey enabled for the external NTP server Enumeration: 'disabled': 0, 'enabled': 1.
                 mbgLtCfgNTPServer6Prefer 1.3.6.1.4.1.5597.3.4.2.6.4 integer read-write
Is the preferred flag enabled for the external NTP server Enumeration: 'disabled': 0, 'enabled': 1.
             mbgLtCfgNTPServer7 1.3.6.1.4.1.5597.3.4.2.7
                 mbgLtCfgNTPServer7IP 1.3.6.1.4.1.5597.3.4.2.7.1 displaystring read-write
IP address for external NTP server
                 mbgLtCfgNTPServer7Key 1.3.6.1.4.1.5597.3.4.2.7.2 integer32 read-write
Key for external NTP server
                 mbgLtCfgNTPServer7Autokey 1.3.6.1.4.1.5597.3.4.2.7.3 integer read-write
Is autokey enabled for the external NTP server Enumeration: 'disabled': 0, 'enabled': 1.
                 mbgLtCfgNTPServer7Prefer 1.3.6.1.4.1.5597.3.4.2.7.4 integer read-write
Is the preferred flag enabled for the external NTP server Enumeration: 'disabled': 0, 'enabled': 1.
             mbgLtCfgNTPStratumLocalClock 1.3.6.1.4.1.5597.3.4.2.8 integer32 read-write
The stratum value assigned to the local clock of the timeserver
             mbgLtCfgNTPTrustedKey 1.3.6.1.4.1.5597.3.4.2.9 integer32 read-write
The key used for the internal refclock of the timeserver
             mbgLtCfgNTPBroadcastIP 1.3.6.1.4.1.5597.3.4.2.10 displaystring read-write
NTP broadcast IP address
             mbgLtCfgNTPBroadcastKey 1.3.6.1.4.1.5597.3.4.2.11 integer32 read-write
Key used for NTP broadcasts
             mbgLtCfgNTPBroadcastAutokey 1.3.6.1.4.1.5597.3.4.2.12 integer read-write
Is autokey generation used for NTP broadcasts Enumeration: 'disabled': 0, 'enabled': 1.
             mbgLtCfgNTPAutokeyFeature 1.3.6.1.4.1.5597.3.4.2.13 integer read-write
Is the NTP autokey feature enabled Enumeration: 'disabled': 0, 'enabled': 1.
             mbgLtCfgNTPAtomPPS 1.3.6.1.4.1.5597.3.4.2.14 integer read-write
Is the NTP atom pps feature enabled Enumeration: 'disabled': 0, 'enabled': 1.
         mbgLtCfgEMail 1.3.6.1.4.1.5597.3.4.3
             mbgLtCfgEMailTo 1.3.6.1.4.1.5597.3.4.3.1 displaystring read-write
EMail address to send alerts etc. to (receiving address)
             mbgLtCfgEMailFrom 1.3.6.1.4.1.5597.3.4.3.2 displaystring read-write
EMail address to send alerts etc. from (sending address)
             mbgLtCfgEMailSmarthost 1.3.6.1.4.1.5597.3.4.3.3 displaystring read-write
SMTP smarthost used to send mail
         mbgLtCfgSNMP 1.3.6.1.4.1.5597.3.4.4
             mbgLtCfgSNMPTrapReceiver1 1.3.6.1.4.1.5597.3.4.4.1 displaystring read-write
First SNMP trap receiver host
             mbgLtCfgSNMPTrapReceiver2 1.3.6.1.4.1.5597.3.4.4.2 displaystring read-write
Second SNMP trap receiver host
             mbgLtCfgSNMPTrapRec1Community 1.3.6.1.4.1.5597.3.4.4.3 displaystring read-write
First SNMP trap receiver community
             mbgLtCfgSNMPTrapRec2Community 1.3.6.1.4.1.5597.3.4.4.4 displaystring read-write
Second SNMP trap receiver community
             mbgLtCfgSNMPReadOnlyCommunity 1.3.6.1.4.1.5597.3.4.4.5 displaystring read-write
SNMP community string for read-only access
             mbgLtCfgSNMPReadWriteCommunity 1.3.6.1.4.1.5597.3.4.4.6 displaystring read-write
SNMP community string for read-write access
             mbgLtCfgSNMPContact 1.3.6.1.4.1.5597.3.4.4.7 displaystring read-write
SNMP contact string for Lantime
             mbgLtCfgSNMPLocation 1.3.6.1.4.1.5597.3.4.4.8 displaystring read-write
SNMP location string for Lantime
         mbgLtCfgWinpopup 1.3.6.1.4.1.5597.3.4.5
             mbgLtCfgWMailAddress1 1.3.6.1.4.1.5597.3.4.5.1 displaystring read-write
First windows popup alert receiver
             mbgLtCfgWMailAddress2 1.3.6.1.4.1.5597.3.4.5.2 displaystring read-write
Second windows popup alert receiver
         mbgLtCfgWalldisplay 1.3.6.1.4.1.5597.3.4.6
             mbgLtCfgVP100Display1IP 1.3.6.1.4.1.5597.3.4.6.1 displaystring read-write
IP address of first VP100 wall display
             mbgLtCfgVP100Display1SN 1.3.6.1.4.1.5597.3.4.6.2 displaystring read-write
Serial number of first VP100 wall display
             mbgLtCfgVP100Display2IP 1.3.6.1.4.1.5597.3.4.6.3 displaystring read-write
IP address of second VP100 wall display
             mbgLtCfgVP100Display2SN 1.3.6.1.4.1.5597.3.4.6.4 displaystring read-write
Serial number of second VP100 wall display
         mbgLtCfgNotify 1.3.6.1.4.1.5597.3.4.7
             mbgLtCfgNotifyNTPNotSync 1.3.6.1.4.1.5597.3.4.7.1 displaystring read-write
Which alerts are sent in case of a NTP_not_sync event
             mbgLtCfgNotifyNTPStopped 1.3.6.1.4.1.5597.3.4.7.2 displaystring read-write
Which alerts are sent in case of a NTP_stopped event
             mbgLtCfgNotifyServerBoot 1.3.6.1.4.1.5597.3.4.7.3 displaystring read-write
Which alerts are sent in case of a server_boot event
             mbgLtCfgNotifyRefclkNoResponse 1.3.6.1.4.1.5597.3.4.7.4 displaystring read-write
Which alerts are sent in case of a refclock_not_responding event
             mbgLtCfgNotifyRefclockNotSync 1.3.6.1.4.1.5597.3.4.7.5 displaystring read-write
Which alerts are sent in case of a refclock_not_sync event
             mbgLtCfgNotifyAntennaFaulty 1.3.6.1.4.1.5597.3.4.7.6 displaystring read-write
Which alerts are sent in case of an antenna_faulty event
             mbgLtCfgNotifyAntennaReconnect 1.3.6.1.4.1.5597.3.4.7.7 displaystring read-write
Which alerts are sent in case of an antenna_reconnect event
             mbgLtCfgNotifyConfigChanged 1.3.6.1.4.1.5597.3.4.7.8 displaystring read-write
Which alerts are sent in case of a config_changed event
             mbgLtCfgNotifySHSTimeLimitError 1.3.6.1.4.1.5597.3.4.7.9 displaystring read-write
Which alerts are sent in case of a SHS_timelimiterror event
             mbgLtCfgNotifyLeapSecond 1.3.6.1.4.1.5597.3.4.7.10 displaystring read-write
Which alerts are sent in case of a Leap_Second_Announced event
         mbgLtCfgEthernet 1.3.6.1.4.1.5597.3.4.8
             mbgLtCfgEthernetIf0 1.3.6.1.4.1.5597.3.4.8.0
                 mbgLtCfgEthernetIf0IPv4IP 1.3.6.1.4.1.5597.3.4.8.0.1 displaystring read-write
The IPv4 address of the first ethernet interface
                 mbgLtCfgEthernetIf0IPv4Netmask 1.3.6.1.4.1.5597.3.4.8.0.2 displaystring read-write
The IPv4 netmask of the first ethernet interface
                 mbgLtCfgEthernetIf0IPv4Gateway 1.3.6.1.4.1.5597.3.4.8.0.3 displaystring read-write
The IPv4 gateway address of the first ethernet interface
                 mbgLtCfgEthernetIf0DHCPClient 1.3.6.1.4.1.5597.3.4.8.0.4 integer read-write
Is DHCP used to get IP parameters for this interface Enumeration: 'disabled': 0, 'enabled': 1.
                 mbgLtCfgEthernetIf0IPv6IP1 1.3.6.1.4.1.5597.3.4.8.0.5 displaystring read-write
The first IPv6 address of the first ethernet interface
                 mbgLtCfgEthernetIf0IPv6IP2 1.3.6.1.4.1.5597.3.4.8.0.6 displaystring read-write
The second IPv6 address of the first ethernet interface
                 mbgLtCfgEthernetIf0IPv6IP3 1.3.6.1.4.1.5597.3.4.8.0.7 displaystring read-write
The third IPv6 address of the first ethernet interface
                 mbgLtCfgEthernetIf0IPv6Autoconf 1.3.6.1.4.1.5597.3.4.8.0.8 integer read-write
Is IPv6 Autoconf used for this interface Enumeration: 'disabled': 0, 'enabled': 1.
                 mbgLtCfgEthernetIf0NetLinkMode 1.3.6.1.4.1.5597.3.4.8.0.9 integer read-write
Link mode for this interface Enumeration: 'link100half': 3, 'link10half': 1, 'link100full': 4, 'link10full': 2, 'autosensing': 0.
             mbgLtCfgEthernetIf1 1.3.6.1.4.1.5597.3.4.8.1
                 mbgLtCfgEthernetIf1IPv4IP 1.3.6.1.4.1.5597.3.4.8.1.1 displaystring read-write
The IPv4 address of the second ethernet interface
                 mbgLtCfgEthernetIf1IPv4Netmask 1.3.6.1.4.1.5597.3.4.8.1.2 displaystring read-write
The IPv4 netmask of the second ethernet interface
                 mbgLtCfgEthernetIf1IPv4Gateway 1.3.6.1.4.1.5597.3.4.8.1.3 displaystring read-write
The IPv4 gateway address of the second ethernet interface
                 mbgLtCfgEthernetIf1DHCPClient 1.3.6.1.4.1.5597.3.4.8.1.4 integer read-write
Is DHCP used to get IP parameters for this interface Enumeration: 'disabled': 0, 'enabled': 1.
                 mbgLtCfgEthernetIf1IPv6IP1 1.3.6.1.4.1.5597.3.4.8.1.5 displaystring read-write
The first IPv6 address of the second ethernet interface
                 mbgLtCfgEthernetIf1IPv6IP2 1.3.6.1.4.1.5597.3.4.8.1.6 displaystring read-write
The second IPv6 address of the second ethernet interface
                 mbgLtCfgEthernetIf1IPv6IP3 1.3.6.1.4.1.5597.3.4.8.1.7 displaystring read-write
The third IPv6 address of the second ethernet interface
                 mbgLtCfgEthernetIf1IPv6Autoconf 1.3.6.1.4.1.5597.3.4.8.1.8 integer read-write
Is IPv6 Autoconf used for this interface Enumeration: 'disabled': 0, 'enabled': 1.
                 mbgLtCfgEthernetIf1NetLinkMode 1.3.6.1.4.1.5597.3.4.8.1.9 integer read-write
Link mode for this interface Enumeration: 'link100half': 3, 'link10half': 1, 'link100full': 4, 'link10full': 2, 'autosensing': 0.
             mbgLtCfgEthernetIf2 1.3.6.1.4.1.5597.3.4.8.2
                 mbgLtCfgEthernetIf2IPv4IP 1.3.6.1.4.1.5597.3.4.8.2.1 displaystring read-write
The IPv4 address of the third ethernet interface
                 mbgLtCfgEthernetIf2IPv4Netmask 1.3.6.1.4.1.5597.3.4.8.2.2 displaystring read-write
The IPv4 netmask of the third ethernet interface
                 mbgLtCfgEthernetIf2IPv4Gateway 1.3.6.1.4.1.5597.3.4.8.2.3 displaystring read-write
The IPv4 gateway address of the third ethernet interface
                 mbgLtCfgEthernetIf2DHCPClient 1.3.6.1.4.1.5597.3.4.8.2.4 integer read-write
Is DHCP used to get IP parameters for this interface Enumeration: 'disabled': 0, 'enabled': 1.
                 mbgLtCfgEthernetIf2IPv6IP1 1.3.6.1.4.1.5597.3.4.8.2.5 displaystring read-write
The first IPv6 address of the third ethernet interface
                 mbgLtCfgEthernetIf2IPv6IP2 1.3.6.1.4.1.5597.3.4.8.2.6 displaystring read-write
The second IPv6 address of the third ethernet interface
                 mbgLtCfgEthernetIf2IPv6IP3 1.3.6.1.4.1.5597.3.4.8.2.7 displaystring read-write
The third IPv6 address of the third ethernet interface
                 mbgLtCfgEthernetIf2IPv6Autoconf 1.3.6.1.4.1.5597.3.4.8.2.8 integer read-write
Is IPv6 Autoconf used for this interface Enumeration: 'disabled': 0, 'enabled': 1.
                 mbgLtCfgEthernetIf2NetLinkMode 1.3.6.1.4.1.5597.3.4.8.2.9 integer read-write
Link mode for this interface Enumeration: 'link100half': 3, 'link10half': 1, 'link100full': 4, 'link10full': 2, 'autosensing': 0.
             mbgLtCfgEthernetIf3 1.3.6.1.4.1.5597.3.4.8.3
                 mbgLtCfgEthernetIf3IPv4IP 1.3.6.1.4.1.5597.3.4.8.3.1 displaystring read-write
The IPv4 address of the fourth ethernet interface
                 mbgLtCfgEthernetIf3IPv4Netmask 1.3.6.1.4.1.5597.3.4.8.3.2 displaystring read-write
The IPv4 netmask of the fourth ethernet interface
                 mbgLtCfgEthernetIf3IPv4Gateway 1.3.6.1.4.1.5597.3.4.8.3.3 displaystring read-write
The IPv4 gateway address of the fourth ethernet interface
                 mbgLtCfgEthernetIf3DHCPClient 1.3.6.1.4.1.5597.3.4.8.3.4 integer read-write
Is DHCP used to get IP parameters for this interface Enumeration: 'disabled': 0, 'enabled': 1.
                 mbgLtCfgEthernetIf3IPv6IP1 1.3.6.1.4.1.5597.3.4.8.3.5 displaystring read-write
The first IPv6 address of the fourth ethernet interface
                 mbgLtCfgEthernetIf3IPv6IP2 1.3.6.1.4.1.5597.3.4.8.3.6 displaystring read-write
The second IPv6 address of the fourth ethernet interface
                 mbgLtCfgEthernetIf3IPv6IP3 1.3.6.1.4.1.5597.3.4.8.3.7 displaystring read-write
The third IPv6 address of the fourth ethernet interface
                 mbgLtCfgEthernetIf3IPv6Autoconf 1.3.6.1.4.1.5597.3.4.8.3.8 integer read-write
Is IPv6 Autoconf used for this interface Enumeration: 'disabled': 0, 'enabled': 1.
                 mbgLtCfgEthernetIf3NetLinkMode 1.3.6.1.4.1.5597.3.4.8.3.9 integer read-write
Link mode for this interface Enumeration: 'link100half': 3, 'link10half': 1, 'link100full': 4, 'link10full': 2, 'autosensing': 0.
             mbgLtCfgEthernetIf4 1.3.6.1.4.1.5597.3.4.8.4
                 mbgLtCfgEthernetIf4IPv4IP 1.3.6.1.4.1.5597.3.4.8.4.1 displaystring read-write
The IPv4 address of the fifth ethernet interface
                 mbgLtCfgEthernetIf4IPv4Netmask 1.3.6.1.4.1.5597.3.4.8.4.2 displaystring read-write
The IPv4 netmask of the fifth ethernet interface
                 mbgLtCfgEthernetIf4IPv4Gateway 1.3.6.1.4.1.5597.3.4.8.4.3 displaystring read-write
The IPv4 gateway address of the fifth ethernet interface
                 mbgLtCfgEthernetIf4DHCPClient 1.3.6.1.4.1.5597.3.4.8.4.4 integer read-write
Is DHCP used to get IP parameters for this interface Enumeration: 'disabled': 0, 'enabled': 1.
                 mbgLtCfgEthernetIf4IPv6IP1 1.3.6.1.4.1.5597.3.4.8.4.5 displaystring read-write
The first IPv6 address of the fifth ethernet interface
                 mbgLtCfgEthernetIf4IPv6IP2 1.3.6.1.4.1.5597.3.4.8.4.6 displaystring read-write
The second IPv6 address of the fifth ethernet interface
                 mbgLtCfgEthernetIf4IPv6IP3 1.3.6.1.4.1.5597.3.4.8.4.7 displaystring read-write
The third IPv6 address of the fifth ethernet interface
                 mbgLtCfgEthernetIf4IPv6Autoconf 1.3.6.1.4.1.5597.3.4.8.4.8 integer read-write
Is IPv6 Autoconf used for this interface Enumeration: 'disabled': 0, 'enabled': 1.
                 mbgLtCfgEthernetIf4NetLinkMode 1.3.6.1.4.1.5597.3.4.8.4.9 integer read-write
Link mode for this interface Enumeration: 'link100half': 3, 'link10half': 1, 'link100full': 4, 'link10full': 2, 'autosensing': 0.
             mbgLtCfgEthernetIf5 1.3.6.1.4.1.5597.3.4.8.5
                 mbgLtCfgEthernetIf5IPv4IP 1.3.6.1.4.1.5597.3.4.8.5.1 displaystring read-write
The IPv4 address of the sixth ethernet interface
                 mbgLtCfgEthernetIf5IPv4Netmask 1.3.6.1.4.1.5597.3.4.8.5.2 displaystring read-write
The IPv4 netmask of the sixth ethernet interface
                 mbgLtCfgEthernetIf5IPv4Gateway 1.3.6.1.4.1.5597.3.4.8.5.3 displaystring read-write
The IPv4 gateway address of the sixth ethernet interface
                 mbgLtCfgEthernetIf5DHCPClient 1.3.6.1.4.1.5597.3.4.8.5.4 integer read-write
Is DHCP used to get IP parameters for this interface Enumeration: 'disabled': 0, 'enabled': 1.
                 mbgLtCfgEthernetIf5IPv6IP1 1.3.6.1.4.1.5597.3.4.8.5.5 displaystring read-write
The first IPv6 address of the sixth ethernet interface
                 mbgLtCfgEthernetIf5IPv6IP2 1.3.6.1.4.1.5597.3.4.8.5.6 displaystring read-write
The second IPv6 address of the sixth ethernet interface
                 mbgLtCfgEthernetIf5IPv6IP3 1.3.6.1.4.1.5597.3.4.8.5.7 displaystring read-write
The third IPv6 address of the sixth ethernet interface
                 mbgLtCfgEthernetIf5IPv6Autoconf 1.3.6.1.4.1.5597.3.4.8.5.8 integer read-write
Is IPv6 Autoconf used for this interface Enumeration: 'disabled': 0, 'enabled': 1.
                 mbgLtCfgEthernetIf5NetLinkMode 1.3.6.1.4.1.5597.3.4.8.5.9 integer read-write
Link mode for this interface Enumeration: 'link100half': 3, 'link10half': 1, 'link100full': 4, 'link10full': 2, 'autosensing': 0.
             mbgLtCfgEthernetIf6 1.3.6.1.4.1.5597.3.4.8.6
                 mbgLtCfgEthernetIf6IPv4IP 1.3.6.1.4.1.5597.3.4.8.6.1 displaystring read-write
The IPv4 address of the seventh ethernet interface
                 mbgLtCfgEthernetIf6IPv4Netmask 1.3.6.1.4.1.5597.3.4.8.6.2 displaystring read-write
The IPv4 netmask of the seventh ethernet interface
                 mbgLtCfgEthernetIf6IPv4Gateway 1.3.6.1.4.1.5597.3.4.8.6.3 displaystring read-write
The IPv4 gateway address of the seventh ethernet interface
                 mbgLtCfgEthernetIf6DHCPClient 1.3.6.1.4.1.5597.3.4.8.6.4 integer read-write
Is DHCP used to get IP parameters for this interface Enumeration: 'disabled': 0, 'enabled': 1.
                 mbgLtCfgEthernetIf6IPv6IP1 1.3.6.1.4.1.5597.3.4.8.6.5 displaystring read-write
The first IPv6 address of the seventh ethernet interface
                 mbgLtCfgEthernetIf6IPv6IP2 1.3.6.1.4.1.5597.3.4.8.6.6 displaystring read-write
The second IPv6 address of the seventh ethernet interface
                 mbgLtCfgEthernetIf6IPv6IP3 1.3.6.1.4.1.5597.3.4.8.6.7 displaystring read-write
The third IPv6 address of the seventh ethernet interface
                 mbgLtCfgEthernetIf6IPv6Autoconf 1.3.6.1.4.1.5597.3.4.8.6.8 integer read-write
Is IPv6 Autoconf used for this interface Enumeration: 'disabled': 0, 'enabled': 1.
                 mbgLtCfgEthernetIf6NetLinkMode 1.3.6.1.4.1.5597.3.4.8.6.9 integer read-write
Link mode for this interface Enumeration: 'link100half': 3, 'link10half': 1, 'link100full': 4, 'link10full': 2, 'autosensing': 0.
             mbgLtCfgEthernetIf7 1.3.6.1.4.1.5597.3.4.8.7
                 mbgLtCfgEthernetIf7IPv4IP 1.3.6.1.4.1.5597.3.4.8.7.1 displaystring read-write
The IPv4 address of the eighth ethernet interface
                 mbgLtCfgEthernetIf7IPv4Netmask 1.3.6.1.4.1.5597.3.4.8.7.2 displaystring read-write
The IPv4 netmask of the eighth ethernet interface
                 mbgLtCfgEthernetIf7IPv4Gateway 1.3.6.1.4.1.5597.3.4.8.7.3 displaystring read-write
The IPv4 gateway address of the eighth ethernet interface
                 mbgLtCfgEthernetIf7DHCPClient 1.3.6.1.4.1.5597.3.4.8.7.4 integer read-write
Is DHCP used to get IP parameters for this interface Enumeration: 'disabled': 0, 'enabled': 1.
                 mbgLtCfgEthernetIf7IPv6IP1 1.3.6.1.4.1.5597.3.4.8.7.5 displaystring read-write
The first IPv6 address of the eighth ethernet interface
                 mbgLtCfgEthernetIf7IPv6IP2 1.3.6.1.4.1.5597.3.4.8.7.6 displaystring read-write
The second IPv6 address of the eighth ethernet interface
                 mbgLtCfgEthernetIf7IPv6IP3 1.3.6.1.4.1.5597.3.4.8.7.7 displaystring read-write
The third IPv6 address of the eighth ethernet interface
                 mbgLtCfgEthernetIf7IPv6Autoconf 1.3.6.1.4.1.5597.3.4.8.7.8 integer read-write
Is IPv6 Autoconf used for this interface Enumeration: 'disabled': 0, 'enabled': 1.
                 mbgLtCfgEthernetIf7NetLinkMode 1.3.6.1.4.1.5597.3.4.8.7.9 integer read-write
Link mode for this interface Enumeration: 'link100half': 3, 'link10half': 1, 'link100full': 4, 'link10full': 2, 'autosensing': 0.
             mbgLtCfgEthernetIf8 1.3.6.1.4.1.5597.3.4.8.8
                 mbgLtCfgEthernetIf8IPv4IP 1.3.6.1.4.1.5597.3.4.8.8.1 displaystring read-write
The IPv4 address of the nineth ethernet interface
                 mbgLtCfgEthernetIf8IPv4Netmask 1.3.6.1.4.1.5597.3.4.8.8.2 displaystring read-write
The IPv4 netmask of the nineth ethernet interface
                 mbgLtCfgEthernetIf8IPv4Gateway 1.3.6.1.4.1.5597.3.4.8.8.3 displaystring read-write
The IPv4 gateway address of the nineth ethernet interface
                 mbgLtCfgEthernetIf8DHCPClient 1.3.6.1.4.1.5597.3.4.8.8.4 integer read-write
Is DHCP used to get IP parameters for this interface Enumeration: 'disabled': 0, 'enabled': 1.
                 mbgLtCfgEthernetIf8IPv6IP1 1.3.6.1.4.1.5597.3.4.8.8.5 displaystring read-write
The first IPv6 address of the nineth ethernet interface
                 mbgLtCfgEthernetIf8IPv6IP2 1.3.6.1.4.1.5597.3.4.8.8.6 displaystring read-write
The second IPv6 address of the nineth ethernet interface
                 mbgLtCfgEthernetIf8IPv6IP3 1.3.6.1.4.1.5597.3.4.8.8.7 displaystring read-write
The third IPv6 address of the nineth ethernet interface
                 mbgLtCfgEthernetIf8IPv6Autoconf 1.3.6.1.4.1.5597.3.4.8.8.8 integer read-write
Is IPv6 Autoconf used for this interface Enumeration: 'disabled': 0, 'enabled': 1.
                 mbgLtCfgEthernetIf8NetLinkMode 1.3.6.1.4.1.5597.3.4.8.8.9 integer read-write
Link mode for this interface Enumeration: 'link100half': 3, 'link10half': 1, 'link100full': 4, 'link10full': 2, 'autosensing': 0.
             mbgLtCfgEthernetIf9 1.3.6.1.4.1.5597.3.4.8.9
                 mbgLtCfgEthernetIf9IPv4IP 1.3.6.1.4.1.5597.3.4.8.9.1 displaystring read-write
The IPv4 address of the tenth ethernet interface
                 mbgLtCfgEthernetIf9IPv4Netmask 1.3.6.1.4.1.5597.3.4.8.9.2 displaystring read-write
The IPv4 netmask of the tenth ethernet interface
                 mbgLtCfgEthernetIf9IPv4Gateway 1.3.6.1.4.1.5597.3.4.8.9.3 displaystring read-write
The IPv4 gateway address of the tenth ethernet interface
                 mbgLtCfgEthernetIf9DHCPClient 1.3.6.1.4.1.5597.3.4.8.9.4 integer read-write
Is DHCP used to get IP parameters for this interface Enumeration: 'disabled': 0, 'enabled': 1.
                 mbgLtCfgEthernetIf9IPv6IP1 1.3.6.1.4.1.5597.3.4.8.9.5 displaystring read-write
The first IPv6 address of the tenth ethernet interface
                 mbgLtCfgEthernetIf9IPv6IP2 1.3.6.1.4.1.5597.3.4.8.9.6 displaystring read-write
The second IPv6 address of the tenth ethernet interface
                 mbgLtCfgEthernetIf9IPv6IP3 1.3.6.1.4.1.5597.3.4.8.9.7 displaystring read-write
The third IPv6 address of the tenth ethernet interface
                 mbgLtCfgEthernetIf9IPv6Autoconf 1.3.6.1.4.1.5597.3.4.8.9.8 integer read-write
Is IPv6 Autoconf used for this interface Enumeration: 'disabled': 0, 'enabled': 1.
                 mbgLtCfgEthernetIf9NetLinkMode 1.3.6.1.4.1.5597.3.4.8.9.9 integer read-write
Link mode for this interface Enumeration: 'link100half': 3, 'link10half': 1, 'link100full': 4, 'link10full': 2, 'autosensing': 0.
         mbgLtCfgSHS 1.3.6.1.4.1.5597.3.4.9
             mbgLtCfgSHSCritLimit 1.3.6.1.4.1.5597.3.4.9.1 integer32 read-write
Max. number of milliseconds the two SHS references can differ before a SHS Critical Timelimit error is issued
             mbgLtCfgSHSWarnLimit 1.3.6.1.4.1.5597.3.4.9.2 integer32 read-write
Max. number of milliseconds the two SHS references can differ before a SHS Warning Timelimit error is issued
         mbgLtCfgMRS 1.3.6.1.4.1.5597.3.4.10
               mbgLtCfgMRSRefPriority 1.3.6.1.4.1.5597.3.4.10.1 displaystring read-write
Priority of MRS Reference Sources, as a comma-separated list
     mbgLtCmd 1.3.6.1.4.1.5597.3.5
         mbgLtCmdExecute 1.3.6.1.4.1.5597.3.5.1 integer read-write
Send a command to the timeserver to be executed Enumeration: 'doGenerateSSHKey': 4, 'doReloadConfig': 3, 'doResetSHSTimeLimitError': 9, 'doSendTestNotification': 8, 'doGenerateHTTPSKey': 5, 'doResetFactoryDefaults': 6, 'doReboot': 1, 'doGenerateNewNTPAutokeyCert': 7, 'ready': 0, 'doFirmwareUpdate': 2.
         mbgLtCmdSetRefTime 1.3.6.1.4.1.5597.3.5.2 displaystring read-write
Set the time of the reference clock and the LANTIME itself
     mbgLtPtp 1.3.6.1.4.1.5597.3.10
           mbgLtPtpMode 1.3.6.1.4.1.5597.3.10.1 displaystring read-only
Display current PTPv2 modus as string
           mbgLtPtpModeVal 1.3.6.1.4.1.5597.3.10.2 integer read-only
Display current PTPv2 modus as integer Enumeration: 'master': 1, 'ordinary': 3, 'stopped': 0, 'slave': 2.
           mbgLtPtpPortState 1.3.6.1.4.1.5597.3.10.3 displaystring read-only
Current PTPv2 port state as string
           mbgLtPtpPortStateVal 1.3.6.1.4.1.5597.3.10.4 integer read-only
Current PTPv2 port state as integer Enumeration: 'uncalibrated': 0, 'slave': 4, 'unicastslave': 6, 'unicastmaster': 5, 'master': 3, 'listening': 2, 'initializing': 1.
           mbgLtPtpOffsetFromGM 1.3.6.1.4.1.5597.3.10.5 displaystring read-only
Current PTPv2 offset from grandmaster as string
           mbgLtPtpOffsetFromGMVal 1.3.6.1.4.1.5597.3.10.6 integer32 read-only
Current PTPv2 offset from grandmaster in nanoseconds
           mbgLtPtpDelay 1.3.6.1.4.1.5597.3.10.7 displaystring read-only
shows the current network delay in nanoseconds as string
           mbgLtPtpDelayVal 1.3.6.1.4.1.5597.3.10.8 integer32 read-only
shows the current network delay in nanoseconds
     mbgLtFdm 1.3.6.1.4.1.5597.3.11
           mbgLtFdmPlFreq 1.3.6.1.4.1.5597.3.11.1 integer32 read-only
shows the current powerline frequency in mHz as an Integer32 value
           mbgLtFdmFreqDev 1.3.6.1.4.1.5597.3.11.2 integer32 read-only
shows the current frequency deviation in mHz as an Integer32 value
           mbgLtFdmNomFreq 1.3.6.1.4.1.5597.3.11.3 integer32 read-only
shows the nominal frequency in mHz as an Integer32 value
     mbgLtConformance 1.3.6.1.4.1.5597.3.90
           mbgLtCompliances 1.3.6.1.4.1.5597.3.90.1
               mbgLtCompliance 1.3.6.1.4.1.5597.3.90.1.1
The compliance statement for SNMP entities which implement version 2 of the LANTIME MIB
           mbgLtGroups 1.3.6.1.4.1.5597.3.90.2
               mbgLtObjectsGroup 1.3.6.1.4.1.5597.3.90.2.1
The collection of objects for the LANTIME MIB
               mbgLtTrapsGroup 1.3.6.1.4.1.5597.3.90.2.2
The collection of traps for the LANTIME MIB