LUM-OA-MIB: View SNMP OID List / Download MIB

VENDOR: LUMENTIS AB


 Home MIB: LUM-OA-MIB
Download as:   
LUM-REG, SNMPv2-CONF, SNMPv2-SMI, LUM-TC, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 lumOaMIBModule 1.3.6.1.4.1.8708.1.1.20
   lumOaConfs 1.3.6.1.4.1.8708.2.19.1
       lumOaGroups 1.3.6.1.4.1.8708.2.19.1.1
       lumOaCompl 1.3.6.1.4.1.8708.2.19.1.2
       lumOaMinimalGroups 1.3.6.1.4.1.8708.2.19.1.3
       lumOaMinimalCompl 1.3.6.1.4.1.8708.2.19.1.4
   lumOaMIBObjects 1.3.6.1.4.1.8708.2.19.2
       oaGeneral 1.3.6.1.4.1.8708.2.19.2.1
           oaGeneralLastChangeTime 1.3.6.1.4.1.8708.2.19.2.1.1
The time when the configuration of the MIB was last changed.
           oaGeneralStateLastChangeTime 1.3.6.1.4.1.8708.2.19.2.1.2
The time when the state of the MIB was last changed.
           oaGeneralOaIfTableSize 1.3.6.1.4.1.8708.2.19.2.1.3
Size of table
           oaGeneralVoaIfTableSize 1.3.6.1.4.1.8708.2.19.2.1.4
Size of table
           oaGeneralVoaClientIfTableSize 1.3.6.1.4.1.8708.2.19.2.1.5
Size of table
           oaGeneralVoaLineIfTableSize 1.3.6.1.4.1.8708.2.19.2.1.6
Size of table
           oaGeneralOaModuleTableSize 1.3.6.1.4.1.8708.2.19.2.1.7
Size of table
       oaIfList 1.3.6.1.4.1.8708.2.19.2.2
           oaIfTable 1.3.6.1.4.1.8708.2.19.2.2.1
The interface list.
               oaIfEntry 1.3.6.1.4.1.8708.2.19.2.2.1.1
An entry in the interface list.
                   oaIfIndex 1.3.6.1.4.1.8708.2.19.2.2.1.1.1
An arbitrary index assigned to each entry.
                   oaIfName 1.3.6.1.4.1.8708.2.19.2.2.1.1.2
The management name of the interface, for example oa:1:2:1-2, where the first number indicates sub-rack, the second slot number and the third is the port number. Examples: oa:s:s:p - Optical amplifier interface
                   oaIfDescr 1.3.6.1.4.1.8708.2.19.2.2.1.1.3
User configurable label.
                   oaIfSubrack 1.3.6.1.4.1.8708.2.19.2.2.1.1.4
The number of the subrack where the interface is located.
                   oaIfSlot 1.3.6.1.4.1.8708.2.19.2.2.1.1.5
The number of the slot where the interface is located.
                   oaIfTxPort 1.3.6.1.4.1.8708.2.19.2.2.1.1.6
The number of the port where the TX-side of the interface is located.
                   oaIfRxPort 1.3.6.1.4.1.8708.2.19.2.2.1.1.7
The number of the port where the RX-side of the interface is located.
                   oaIfInvPhysIndexOrZero 1.3.6.1.4.1.8708.2.19.2.2.1.1.8
The row in the invPhysTable for this interface. Set to 0 if not known.
                   oaIfAdminStatus 1.3.6.1.4.1.8708.2.19.2.2.1.1.9
The administrative state for the interface. down - The interface should be inactive. service - The interface is activated but alarms are suppressed. Intended for use during service or re-configuration. When service is concluded adminStatus should be set to up again. up - The interface should be activated when it becomes available. Alarms are not suppressed. This attribute can be written via SNMP.
                   oaIfOperStatus 1.3.6.1.4.1.8708.2.19.2.2.1.1.10
The operational state for the interface. notPresent - The physical resources are not available. down - The interface is de-activated or the are faults preventing it from going to the up-state. up - The interface is operational.
                   oaIfLaserStatus 1.3.6.1.4.1.8708.2.19.2.2.1.1.11
The operational state of the laser. off - The laser is turned off. on - The laser is turned on.
                   oaIfAmplifierType 1.3.6.1.4.1.8708.2.19.2.2.1.1.12
The type of amplifier for this interface. preAmp25GAd - pre-amplifier for 2.5 G, add-drop preAmp25GTm - pre-amplifier for 2.5 G, terminal multiplexor powAmp10G - power amplifier for 10 G preAmp10GAd - pre-amplifier for 10 G, add-drop preAmp10GTm - pre-amplifier for 10 G, terminal multiplexor constantGain - used for pre-amps and other point-to-point links. Uses ASE compensation. => specify wantedGain constantGainLI - Default value. Works as constantGain but uses low input power mode. Please, refer to OA commissioning manual to decideoaIfRxSignalStatus which gain mode that should be used. constantGainHI - Works as constantGain but uses high input power mode. Please, refer to OA commissioning manual to decide which gain mode that should be used. constantSignalPower - used in combination with 2 channel add-drop filters. Uses ASE compensation. => specify wantedSignalPower constantPower - For test purposes No ASE compensation. => specify wantedAbsolutePower
                   oaIfWantedAbsolutePowerLevel 1.3.6.1.4.1.8708.2.19.2.2.1.1.13
For powAmp10G and constantPower, the user can give the wanted absolute power level in units of 0.1 dBm. For OA10 and OA17 in constantGain and constantSignalPower, this parameter shows the derived absolute power level. The value is calculated from the other given parameters.
                   oaIfWantedRelativePowerLevel 1.3.6.1.4.1.8708.2.19.2.2.1.1.14
Wanted offset from production setting in units of 0.1 dBm. Applicable for preAmp25GAd and preAmp10GAd. Note that the output power level is dependent on the power of the input signal, so you might not always get the power that you want.
                   oaIfWantedGain 1.3.6.1.4.1.8708.2.19.2.2.1.1.15
Signal gain setting in units of 0.1 dB. Applicable for preAmp25GTm, preAmp10GTm and constantGain/LI/HI. This attribute can be written via SNMP.
                   oaIfFrequencyMin 1.3.6.1.4.1.8708.2.19.2.2.1.1.16
Lowest amplified freqency in hundreds of GHz (0.01 GHz). Supported range 19210 ... 19590 (c921 .. c959)
                   oaIfFrequencyMax 1.3.6.1.4.1.8708.2.19.2.2.1.1.17
Highest amplified freqency in hundreds of GHz (0.01 GHz). Supported range 19210 ... 19590 (c921 .. c959)
                   oaIfNominalTxPower 1.3.6.1.4.1.8708.2.19.2.2.1.1.18
The production setting for output power in units of 0.1 dBm.
                   oaIfTxPowerLevel 1.3.6.1.4.1.8708.2.19.2.2.1.1.19
The transmitted power level in units of 0.1 dBm.
                   oaIfRxPowerLevel 1.3.6.1.4.1.8708.2.19.2.2.1.1.20
The received power level in units of 0.1 dBm.
                   oaIfRxPowerLevelLowThreshold 1.3.6.1.4.1.8708.2.19.2.2.1.1.21
The lower threshold for received power level relative to the loss of signal threshold, in units of 0.1 dB.
                   oaIfLaserBias 1.3.6.1.4.1.8708.2.19.2.2.1.1.22
Measures laser bias current value in tenths of mA (0.1 mA).
                   oaIfNominalLaserTemp 1.3.6.1.4.1.8708.2.19.2.2.1.1.23
The pre-set laser temperature (0.1 deg C)
                   oaIfRelativeLaserTemp 1.3.6.1.4.1.8708.2.19.2.2.1.1.24
The current offset from the pre-set temperature in units of 0.1 degrees centigrade.
                   oaIfLossOfSignalThreshold 1.3.6.1.4.1.8708.2.19.2.2.1.1.25
The threshold for loss of signal. Note: Depending on the type of optical amplifier the value range may vary.
                   oaIfLossOfSignal 1.3.6.1.4.1.8708.2.19.2.2.1.1.26
Loss of signal. Applicable for all signal formats. A(ctivation): Active loss of signal HW indication. D(e-activation): Inactive loss of signal HW indication.
                   oaIfPumpLaserTempHigh 1.3.6.1.4.1.8708.2.19.2.2.1.1.27
Pump laser temperature too high. A(ctivation): Temperature exceedes threshold. D(e-activation): Temperature below threshold again.
                   oaIfRegulationProblemRxPowerHigh 1.3.6.1.4.1.8708.2.19.2.2.1.1.28
The input power is above meassuring range. A: The received power level exceeds the associated threshold. D: The received power level is 0.5 dBm below the threshold.
                   oaIfRegulationProblemTxPowerHigh 1.3.6.1.4.1.8708.2.19.2.2.1.1.29
The output power is above meassuring range. A: The received power level exceeds the associated threshold. D: The received power level is 0.5 dBm below the threshold.
                   oaIfRegulationProblemTxPowerLow 1.3.6.1.4.1.8708.2.19.2.2.1.1.30
The output power is below meassuring range. A: The transmitted power level below the associated threshold. D: The transmitted power level is 0.5 dBm above the threshold.
                   oaIfReceivedPowerLow 1.3.6.1.4.1.8708.2.19.2.2.1.1.31
Received power level low threshold exceeded. A: The received power level is below the associated threshold. D: The received power level is 0.5 dBm above the threshold.
                   oaIfLaserBiasHigh 1.3.6.1.4.1.8708.2.19.2.2.1.1.32
Laser bias high threshold exceeded. A: The laser bias current exceeds the associated threshold. D: The laser bias current is 0.5 mA below the associated threshold.
                   oaIfLaserTempControlFault 1.3.6.1.4.1.8708.2.19.2.2.1.1.33
The pump laser temperature exceeds the associated threshold. A: The temperature exceeds the value. D: The temperature is below the value.
                   oaIfHwMissing 1.3.6.1.4.1.8708.2.19.2.2.1.1.34
The HW for this i/f is not present A: Wrong HW is inserted in subrack. D: Correct HW is inserted in subrack.
                   oaIfConfigurationCommand 1.3.6.1.4.1.8708.2.19.2.2.1.1.35
Select which amplifier type to use. All modes are not applicable for all type of amplifier boards. constantGain: Amplifier will set output power according to the input power and the given gain constantSignalPower: Amplifier will set a constant output power with noise-compensation constantPower: Amplifier will set a constant output power independent of input power constantGainLI: Amplifier will work with constant gain in the low input power region (-35 to -5 dBm) constantGainHI: Amplifier will work with constant gain in the high input power region (-25 to +8 dBm) pow10: Power amplifier for 10G pre10ad: Pre-amplifier for 10G in add/drop config. pre25ad: Pre-amplifier for 2.5G in add/drop config. pre10tm: Pre-amplifier for 10G in TM configuration pre25tm: Pre-amplifier for 2.5G in TM configuration
                   oaIfPumpLaserTempLow 1.3.6.1.4.1.8708.2.19.2.2.1.1.36
Pump laser temperature too low. A(ctivation): Temperature exceedes threshold. D(e-activation): Temperature above threshold again.
                   oaIfLaserTempLowRelativeThreshold 1.3.6.1.4.1.8708.2.19.2.2.1.1.37
Threshold for the Laser Temp Low alarm, expressed as an offset from a pre-set nominal temperature, in units of 0.1 degrees centigrade.
                   oaIfLaserTempHighRelativeThreshold 1.3.6.1.4.1.8708.2.19.2.2.1.1.38
Threshold for the Laser Temp High alarm, expressed as an offset from a pre-set nominal temperature, in units of 0.1 degrees centigrade.
                   oaIfAmpTypeNotSupportedByHw 1.3.6.1.4.1.8708.2.19.2.2.1.1.39
The HW revision does not support the selected amplifier type.
                   oaIfWantedSignalPowerLevel 1.3.6.1.4.1.8708.2.19.2.2.1.1.40
Wanted offset from production setting in units of 0.1 dBm. Applicable for preAmp25GAd and preAmp10GAd. Note that the output power level is dependent on the power of the input signal, so you might not always get the power that you want.
                   oaIfObjectProperty 1.3.6.1.4.1.8708.2.19.2.2.1.1.41
Property mask.
                   oaIfLaserForcedOn 1.3.6.1.4.1.8708.2.19.2.2.1.1.42
When enabled, the laser is on regardless of whether there is an input signal present or not. disabled - the laser is only on when there is an input signal. enabled - the laser is always on. This is intended to be used at installation to generate light in order to verify the connectivity. NOTE: This attribute is not persistent
                   oaIfActualLaserTemp 1.3.6.1.4.1.8708.2.19.2.2.1.1.43
The current laser temperature in units of 0.1 degrees centigrade.
                   oaIfAutomaticPowerShutdown 1.3.6.1.4.1.8708.2.19.2.2.1.1.44
When enabled, the laser is turned off if the input signal to the other gain block is lost. disabled - the laser is NOT affected by the other gain block. enabled - the laser is turned off if the input to the other gain block is lost.
                   oaIfDisabled 1.3.6.1.4.1.8708.2.19.2.2.1.1.45
The interface is disabled. A: Interface disabled. D: Interface enabled.
                   oaIfWantedPowerLimit 1.3.6.1.4.1.8708.2.19.2.2.1.1.46
Applicable for constantGainLI/HI. Sets the maximum allowed output power. This attribute can be written via SNMP.
                   oaIfModuleInfo 1.3.6.1.4.1.8708.2.19.2.2.1.1.47
Information (for example firmware and serial number) about the module.
                   oaIfMonitorInsertionLoss 1.3.6.1.4.1.8708.2.19.2.2.1.1.48
The insertion loss for the monitor port. When the real insertion loss is not possible to read from unit (older HW revsions), 20 (default) dB will be shown which is the normal value.
                   oaIfNumMonitorInsertionLoss 1.3.6.1.4.1.8708.2.19.2.2.1.1.49
This is the same parameter as Monitor Port Insertion Loss. The difference is that you will not see if the value can be read from the port or not (if not 20 dB will be shown).
                   oaIfFunctionalType 1.3.6.1.4.1.8708.2.19.2.2.1.1.50
The functional type of amplifier. This attribute is ONLY used by TNM and the traffic is not affected if changed. undefined - default preAmp - pre-amplifier. Receiving amplifier on a terminal node. offLinePreAmp - offline pre-amplifier. Receiving amplifier in a non-terminal node. Offline pre-amplifier amplifies dropped traffic, NOT line traffic. lineAmp - line amplifier. Amplifier situated between the terminal nodes, which amplifies passing line traffic and (if applicable) added traffic. booster - booster. The transmitting amplifier from a terminal node.
                   oaIfActualGain 1.3.6.1.4.1.8708.2.19.2.2.1.1.51
Actual measured gain in units of 0.1 dB.
                   oaIfSaturationFault 1.3.6.1.4.1.8708.2.19.2.2.1.1.52
Saturation alarm threshold is passed. Actual Gain < (Wanted Gain -1 dB). The alarm can be cleared be cleared by reducing the wanted gain attribute.
                   oaIfWantedGainTilt 1.3.6.1.4.1.8708.2.19.2.2.1.1.53
Settable gain tilt for variable gain OA in units of 0.1 dB. Positive gain tilt is defined as gain increasing wavelength. Negative gain tilt is defined as gain decreasing wavelength.
                   oaIfTxPowerLevelLowThreshold 1.3.6.1.4.1.8708.2.19.2.2.1.1.54
The lower threshold for transmitted power level transmits to the loss of signal threshold, in units of 0.1 dB.
                   oaIfLaserPumpBias 1.3.6.1.4.1.8708.2.19.2.2.1.1.55
Measures laser pump bias current in per cent (%) of max value.
                   oaIfCaseTempOutOfrange 1.3.6.1.4.1.8708.2.19.2.2.1.1.56
The module has shutdown automatically because of too high case temp (>85 degC) or too low case temp (-40 degC). A(ctivation): Case temperature exceedes pre-set temp range. D(e-activation): Case temperature within pre-set temp range again.
                   oaIfLaserTempOutOfRange 1.3.6.1.4.1.8708.2.19.2.2.1.1.57
the module has shutdown automatically because of pump laser temp out of range (15-35 degC). A(ctivation): Laser temperature exceedes pre-set value. D(e-activation): Laser temperature below pre-set value again.
                   oaIfSupportsReadMonitorInsertionLoss 1.3.6.1.4.1.8708.2.19.2.2.1.1.58
This value tells whether a OA interface has the ability to read the insertion loss value for the monitor port on an interface. true: Insertion loss can be read for this interface false: Insertion loss cannot be read for this interface
                   oaIfTxSignalStatus 1.3.6.1.4.1.8708.2.19.2.2.1.1.59
The operational state for outgoing (TX) signal of the interface. down - A fault that would lead to a protection switch has occurred. degraded - The signal quality is impaired. up - The signal is OK. notApplicable (2147483647) - Attribute is not used on board.
                   oaIfRxSignalStatus 1.3.6.1.4.1.8708.2.19.2.2.1.1.60
The operational state for incoming (RX) signal of the interface. down - A major fault has occurred degraded - The signal quality is impaired. up - The signal is OK. notApplicable (2147483647) - Attribute is not used on board
                   oaIfOutputPowerFail 1.3.6.1.4.1.8708.2.19.2.2.1.1.61
Output power failed alarm threshold is passed. Actual Gain < (Wanted Gain -1 dB) and Output Power < (Power Limit -1 dB).
       lumentisOaNotifications 1.3.6.1.4.1.8708.2.19.2.3
       oaVoaIfList 1.3.6.1.4.1.8708.2.19.2.4
           oaVoaIfTable 1.3.6.1.4.1.8708.2.19.2.4.1
The interface list.
               oaVoaIfEntry 1.3.6.1.4.1.8708.2.19.2.4.1.1
An entry in the interface list.
                   oaVoaIfIndex 1.3.6.1.4.1.8708.2.19.2.4.1.1.1
An arbitrary index assigned to each entry.
                   oaVoaIfName 1.3.6.1.4.1.8708.2.19.2.4.1.1.2
The management name of the interface, for example voa:1:2:1.
                   oaVoaIfDescr 1.3.6.1.4.1.8708.2.19.2.4.1.1.3
User configurable label.
                   oaVoaIfSubrack 1.3.6.1.4.1.8708.2.19.2.4.1.1.4
The number of the subrack where the interface is located.
                   oaVoaIfSlot 1.3.6.1.4.1.8708.2.19.2.4.1.1.5
The number of the slot where the interface is located.
                   oaVoaIfTxPort 1.3.6.1.4.1.8708.2.19.2.4.1.1.6
The number of the port where the TX part of the interface is located.
                   oaVoaIfRxPort 1.3.6.1.4.1.8708.2.19.2.4.1.1.7
The number of the port where the RX part of the interface is located.
                   oaVoaIfInvPhysIndexOrZero 1.3.6.1.4.1.8708.2.19.2.4.1.1.8
The row in the invPhysTable for this interface. Set to 0 if not known.
                   oaVoaIfAdminStatus 1.3.6.1.4.1.8708.2.19.2.4.1.1.9
The administrative state for the interface. down - The interface should be inactive. service - The interface is activated but alarms are suppressed. Intended for use during service or re-configuration. When service is concluded adminStatus should be set to up again. Note that there is no difference between up and service, if no alarms can be rasied from this object. up - The interface should be activated when it becomes available. Alarms are not suppressed. This attribute can be written via SNMP.
                   oaVoaIfOperStatus 1.3.6.1.4.1.8708.2.19.2.4.1.1.10
The operational state for the interface. notPresent - The interface is not available. down - The interface is not used. up - The interface is active.
                   oaVoaIfObjectProperty 1.3.6.1.4.1.8708.2.19.2.4.1.1.11
Property mask.
                   oaVoaIfControlMode 1.3.6.1.4.1.8708.2.19.2.4.1.1.12
The control mode of the VOA channel. constPower - regulate slowly towards a given output power. constAttenuation - set a fix attenuation constPowerAtInstallation - like constPower but allow faster changes (this mode is not released)
                   oaVoaIfWantedOutputPower 1.3.6.1.4.1.8708.2.19.2.4.1.1.13
The wanted output power. Applicable for constPower.
                   oaVoaIfCurrentOutputPower 1.3.6.1.4.1.8708.2.19.2.4.1.1.14
The actual output power.
                   oaVoaIfRegulationRange 1.3.6.1.4.1.8708.2.19.2.4.1.1.15
An offset below the wanted output power at which the Current Power Out Of Range alarm shall be raised. When the current output power is so far below the wanted output power, the regulation stops and the alarm is raised. Applicable for constPower.
                   oaVoaIfWantedAttenuation 1.3.6.1.4.1.8708.2.19.2.4.1.1.16
The wanted attenuation. voa8ch: applicable for constAttenuation voa2ch: always applicable This attribute can be written via SNMP.
                   oaVoaIfCurrentAttenuation 1.3.6.1.4.1.8708.2.19.2.4.1.1.17
The current attenuation. Applicable for constPower.
                   oaVoaIfSamplePeriod 1.3.6.1.4.1.8708.2.19.2.4.1.1.18
The approximate period between 2 consecutive measurements of the output power
                   oaVoaIfOuputPowerControlFailure 1.3.6.1.4.1.8708.2.19.2.4.1.1.19
Alarm raised when the wanted output power can not be obtained. That is, even if the attenuation is reduced to zero, the wanted power can not be obtained.
                   oaVoaIfCurrentPowerOutOfRange 1.3.6.1.4.1.8708.2.19.2.4.1.1.20
Alarm raised when the current output power is outside the regulation range. The regulation range is defined by Wanted Output Power +/- Regulation Range At this point, no regulation will be performed. The operator must change the wantedOutputPower.
                   oaVoaIfConfigurationCommand 1.3.6.1.4.1.8708.2.19.2.4.1.1.21
Select which control mode to use: constPower constAttenuation
                   oaVoaIfInInstallationMode 1.3.6.1.4.1.8708.2.19.2.4.1.1.22
Alarm raised when the VOA is put in the mode constPowerAtInstallation.
       oaVoaClientIfList 1.3.6.1.4.1.8708.2.19.2.5
           oaVoaClientIfTable 1.3.6.1.4.1.8708.2.19.2.5.1
The interface list.
               oaVoaClientIfEntry 1.3.6.1.4.1.8708.2.19.2.5.1.1
An entry in the interface list.
                   oaVoaClientIfIndex 1.3.6.1.4.1.8708.2.19.2.5.1.1.1
An arbitrary index assigned to each entry.
                   oaVoaClientIfName 1.3.6.1.4.1.8708.2.19.2.5.1.1.2
The management name of the interface, for example voaClient:1:2:1 which indicates subrack 1, board 2 and port 1.
                   oaVoaClientIfDescr 1.3.6.1.4.1.8708.2.19.2.5.1.1.3
User configurable label.
                   oaVoaClientIfSubrack 1.3.6.1.4.1.8708.2.19.2.5.1.1.4
The number of the subrack where the interface is located.
                   oaVoaClientIfSlot 1.3.6.1.4.1.8708.2.19.2.5.1.1.5
The number of the slot where the interface is located.
                   oaVoaClientIfTxPort 1.3.6.1.4.1.8708.2.19.2.5.1.1.6
The number of the port where the Tx part of the interface is located.
                   oaVoaClientIfRxPort 1.3.6.1.4.1.8708.2.19.2.5.1.1.7
The number of the port where the Rx part of the interface is located.
                   oaVoaClientIfInvPhysIndexOrZero 1.3.6.1.4.1.8708.2.19.2.5.1.1.8
The row in the invPhysTable for this interface. Set to 0 if not known.
                   oaVoaClientIfAdminStatus 1.3.6.1.4.1.8708.2.19.2.5.1.1.9
The administrative state for the interface. down - The interface should be inactive. service - The interface is activated but alarms are suppressed. Intended for use during service or re-configuration. When service is concluded adminStatus should be set to up again. up - The interface should be activated when it becomes available. Alarms are not suppressed.
                   oaVoaClientIfOperStatus 1.3.6.1.4.1.8708.2.19.2.5.1.1.10
The operational state for the interface. notPresent - The interface is not available. down - The interface is not used. up - The interface is active.
                   oaVoaClientIfObjectProperty 1.3.6.1.4.1.8708.2.19.2.5.1.1.11
Property mask.
                   oaVoaClientIfControlMode 1.3.6.1.4.1.8708.2.19.2.5.1.1.12
The control mode of the VOA channel. constAttenuation - set a fix attenuation
                   oaVoaClientIfWantedAttenuation 1.3.6.1.4.1.8708.2.19.2.5.1.1.13
The wanted attenuation. Applicable for constAttenuation This attribute can be written via SNMP if not set to 2147483647.
                   oaVoaClientIfCurrentAttenuation 1.3.6.1.4.1.8708.2.19.2.5.1.1.14
The current attenuation. Applicable in case of MDU40 boards.
                   oaVoaClientIfLambda 1.3.6.1.4.1.8708.2.19.2.5.1.1.15
The frequency given in hundreds of GHz (0.01 GHz). Set to 0 for transparent ports.
                   oaVoaClientIfAbsoluteAttenuation 1.3.6.1.4.1.8708.2.19.2.5.1.1.16
The wanted absolute attenuation including the insertion loss. This value can never be set below the upper limit of the insertion loss. VOA8CHSFP: The range is dependent on the inserted VOA SFP. This attribute can be written via SNMP.
                   oaVoaClientIfVoa2CurrentAttenuation 1.3.6.1.4.1.8708.2.19.2.5.1.1.17
This value shows the current set absolute attenua- tion on VOA8ch-II and voa8chsfp. This value is usually the same value as the absolute attenuation except when a decrase or increase of attenuation is ongoing or when administrative status is set to down.
                   oaVoaClientIfDecreaseAttenuation 1.3.6.1.4.1.8708.2.19.2.5.1.1.18
The wanted decrease of the current attenuation. This attribute can be written via SNMP.
                   oaVoaClientIfIncreaseAttenuation 1.3.6.1.4.1.8708.2.19.2.5.1.1.19
The wanted increase of the current attenuation. This attribute can be written via SNMP.
                   oaVoaClientIfInsertionLoss 1.3.6.1.4.1.8708.2.19.2.5.1.1.20
The insertion loss for the port. The attenuation can never be set to a value below this value.
                   oaVoaClientIfExpectedFrequency 1.3.6.1.4.1.8708.2.19.2.5.1.1.21
The frequency given in hundreds of GHz (0.01 GHz). This value is only used for presentation purposes in name of port.
                   oaVoaClientIfSfpMissing 1.3.6.1.4.1.8708.2.19.2.5.1.1.22
An expected VOA SFP is missing. A(ctivation): An expected SFP is missing. D(e-activation): The missing SFP is inserted.
                   oaVoaClientIfSfpClass 1.3.6.1.4.1.8708.2.19.2.5.1.1.23
String that contains general information about the SFP.
                   oaVoaClientIfSfpTransmitterFailed 1.3.6.1.4.1.8708.2.19.2.5.1.1.24
The SFP has detected a failure in the transmitter part. A(ctivation): The transmitter has failed D(e-activation): The transmitter is OK again
                   oaVoaClientIfSfpMediaMismatch 1.3.6.1.4.1.8708.2.19.2.5.1.1.25
The type of the inserted SFP is not the expected one. A(ctivation): Invalid or mismatching SFP media is detected. D(e-activation): The correct SFP is used.
                   oaVoaClientIfLossOfSignal 1.3.6.1.4.1.8708.2.19.2.5.1.1.26
Loss of signal. A(ctivation): Active loss of signal HW indication. D(e-activation): Inactive loss of signal HW indication.
                   oaVoaClientIfSfpCodeMismatch 1.3.6.1.4.1.8708.2.19.2.5.1.1.27
The inserted SFP does not have a legal manufacturer code. A(ctivation): A SFP with illegal code is inserted. D(e-activation): The SFP with illegal code is removed.
                   oaVoaClientIfAttenuationConfigMismatch 1.3.6.1.4.1.8708.2.19.2.5.1.1.28
The wanted attenuation is not supported by the inserted SFP.
       oaVoaLineIfList 1.3.6.1.4.1.8708.2.19.2.6
           oaVoaLineIfTable 1.3.6.1.4.1.8708.2.19.2.6.1
The interface list.
               oaVoaLineIfEntry 1.3.6.1.4.1.8708.2.19.2.6.1.1
An entry in the interface list.
                   oaVoaLineIfIndex 1.3.6.1.4.1.8708.2.19.2.6.1.1.1
An arbitrary index assigned to each entry.
                   oaVoaLineIfName 1.3.6.1.4.1.8708.2.19.2.6.1.1.2
The management name of the interface, for example VoaLine:1:2:1-2, where the first number indicates sub-rack, the second slot number and the third is the port number. Examples: oaVoaLine:s:s:p - line interface
                   oaVoaLineIfDescr 1.3.6.1.4.1.8708.2.19.2.6.1.1.3
User configurable label. This attribute can be written via SNMP.
                   oaVoaLineIfSubrack 1.3.6.1.4.1.8708.2.19.2.6.1.1.4
The number of the subrack where the interface is located.
                   oaVoaLineIfSlot 1.3.6.1.4.1.8708.2.19.2.6.1.1.5
The number of the slot where the interface is located.
                   oaVoaLineIfTxPort 1.3.6.1.4.1.8708.2.19.2.6.1.1.6
The number of the port where the TX-side of the interface is located.
                   oaVoaLineIfRxPort 1.3.6.1.4.1.8708.2.19.2.6.1.1.7
The number of the port where the RX-side of the interface is located.
                   oaVoaLineIfInvPhysIndexOrZero 1.3.6.1.4.1.8708.2.19.2.6.1.1.8
The row in the invPhysTable for this interface. Set to 0 if not known.
                   oaVoaLineIfAdminStatus 1.3.6.1.4.1.8708.2.19.2.6.1.1.9
The administrative state for the interface. down - The interface should be inactive. service - The interface is activated but alarms are suppressed. Intended for use during service or re-configuration. When service is concluded adminStatus should be set to up again. up - The interface should be activated when it becomes available. Alarms are not suppressed.
                   oaVoaLineIfOperStatus 1.3.6.1.4.1.8708.2.19.2.6.1.1.10
The operational state for the interface. notPresent - The interface is not available. down - The interface is not used. up - The interface is active.
                   oaVoaLineIfModuleFailure 1.3.6.1.4.1.8708.2.19.2.6.1.1.11
The module HW has detected a failure. A: The module has failed D: The module is OK again
                   oaVoaLineIfObjectProperty 1.3.6.1.4.1.8708.2.19.2.6.1.1.12
Property mask.
       oaModuleList 1.3.6.1.4.1.8708.2.19.2.7
           oaModuleTable 1.3.6.1.4.1.8708.2.19.2.7.1
The module list.
               oaModuleEntry 1.3.6.1.4.1.8708.2.19.2.7.1.1
An entry in the module list.
                   oaModuleIndex 1.3.6.1.4.1.8708.2.19.2.7.1.1.1
An arbitrary index assigned to each entry.
                   oaModuleName 1.3.6.1.4.1.8708.2.19.2.7.1.1.2
The management name of the interface, for example module:1:2:1.
                   oaModuleDescr 1.3.6.1.4.1.8708.2.19.2.7.1.1.3
User configurable label.
                   oaModuleSubrack 1.3.6.1.4.1.8708.2.19.2.7.1.1.4
The number of the subrack where the module is located.
                   oaModuleSlot 1.3.6.1.4.1.8708.2.19.2.7.1.1.5
The number of the slot where the module is located.
                   oaModuleNumber 1.3.6.1.4.1.8708.2.19.2.7.1.1.6
The number of the module on the board.
                   oaModuleInvPhysIndexOrZero 1.3.6.1.4.1.8708.2.19.2.7.1.1.7
The row in the invPhysTable for this interface. Set to 0 if not known.
                   oaModuleAdminStatus 1.3.6.1.4.1.8708.2.19.2.7.1.1.8
The administrative state for the module. up - Alarms are not suppressed. service - Alarms from the module are suppressed. The module is still activated. down - Currently not used.
                   oaModuleOperStatus 1.3.6.1.4.1.8708.2.19.2.7.1.1.9
The operational state for the module. notPresent - The module is not available. down - The module is not used. up - The module is active.
                   oaModuleObjectProperty 1.3.6.1.4.1.8708.2.19.2.7.1.1.10
Property mask.
                   oaModuleNominalTemp 1.3.6.1.4.1.8708.2.19.2.7.1.1.11
The set temperature in units of 0.1 degrees centigrade.
                   oaModuleRelativeTemp 1.3.6.1.4.1.8708.2.19.2.7.1.1.12
The relative temperature in units of 0.1 degrees centigrade.
                   oaModuleTempFailure 1.3.6.1.4.1.8708.2.19.2.7.1.1.13
The module temperature is above/below expected one. A: The temperature is not correct. D: The temperature becomes correct.
                   oaModuleTemperature 1.3.6.1.4.1.8708.2.19.2.7.1.1.14
The temperature of the module in 0.1 degrees centigrade
                   oaModuleCommunicationFailure 1.3.6.1.4.1.8708.2.19.2.7.1.1.15
The communication with the module failed. A(ctivation): Failed to talk to the module D(e-activation): Could talk to the module again
                   oaModuleModuleInfo 1.3.6.1.4.1.8708.2.19.2.7.1.1.16
Information (for example firmware and serial number) about the module.
                   oaModuleVcomThresholdExceeded 1.3.6.1.4.1.8708.2.19.2.7.1.1.17
The common voltage supply in the ROADM module has exceeded recommended threshold. Firmware upgrade is recommended to resolve this alarm. A(ctivation): The VCOM threshold is exceeded D(e-activation): The VCOM threshold is OK again
                   oaModuleFirmwareUpgradeAvailable 1.3.6.1.4.1.8708.2.19.2.7.1.1.18
An upgrade is available for the ROADM module. See release notes for details on how to obtain and install the upgrade
                   oaModuleWarmingUp 1.3.6.1.4.1.8708.2.19.2.7.1.1.19
ROADM module is warming up, the optics has not reached a stable temperature, all channels are blocked. A(ctivation): cold start of ROADM board D(e-activation): the warning is cleared as soon as the module has reached a stable temperature, this takes 3-8 minutes
                   oaModuleFailure 1.3.6.1.4.1.8708.2.19.2.7.1.1.20
The module HW has detected a failure. A(ctivation): The module has failed D(e-activation): The module is OK again