LUM-INVENTORY-MIB: View SNMP OID List / Download MIB

VENDOR: LUMENTIS AB


 Home MIB: LUM-INVENTORY-MIB
Download as:   
LUM-REG, SNMPv2-CONF, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, LUM-TC, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 lumInventoryMIBModule 1.3.6.1.4.1.8708.1.1.5
The inventory MIB. In large parts modeled after the Entity MIB version 2 see RFC2737. - General - Physical entitites
 lumInventoryConfs 1.3.6.1.4.1.8708.2.3.1
     lumInventoryGroups 1.3.6.1.4.1.8708.2.3.1.1
         invPhysGroup 1.3.6.1.4.1.8708.2.3.1.1.1
The physical inventory objects.
         invGeneralGroup 1.3.6.1.4.1.8708.2.3.1.1.2
The physical inventory objects.
         invEventGroup 1.3.6.1.4.1.8708.2.3.1.1.3
The inventory notifications.
         invGeneralGroupV2 1.3.6.1.4.1.8708.2.3.1.1.4
The physical inventory objects.
         invPhysGroupV2 1.3.6.1.4.1.8708.2.3.1.1.5
The physical inventory objects V2.
         invPhysGroupV3 1.3.6.1.4.1.8708.2.3.1.1.6
The physical inventory objects V3.
         invEntityGroup 1.3.6.1.4.1.8708.2.3.1.1.7
The entity objects V1.
         invRelationGroup 1.3.6.1.4.1.8708.2.3.1.1.8
The relation objects V1.
         invGeneralGroupV3 1.3.6.1.4.1.8708.2.3.1.1.9
The physical inventory objects.
         invGeneralGroupV4 1.3.6.1.4.1.8708.2.3.1.1.10
The physical inventory objects v4.
         invPhysGroupV4 1.3.6.1.4.1.8708.2.3.1.1.11
The physical inventory objects V4 (release R23.1).
         invPhysGroupV5 1.3.6.1.4.1.8708.2.3.1.1.12
The physical inventory objects V5 (release R28).
         invInsRemGroup 1.3.6.1.4.1.8708.2.3.1.1.13
The insert remove events objects V1 (release R28).
         invGeneralGroupV5 1.3.6.1.4.1.8708.2.3.1.1.14
The physical inventory objects V5 (release R28).
     lumInventoryCompl 1.3.6.1.4.1.8708.2.3.1.2
         lumInventoryBasicComplV1 1.3.6.1.4.1.8708.2.3.1.2.1
Basic implementation requirements for the inventory MIB.
         lumInventoryBasicComplV2 1.3.6.1.4.1.8708.2.3.1.2.2
Basic implementation requirements for the inventory MIB v2.
         lumInventoryBasicComplV3 1.3.6.1.4.1.8708.2.3.1.2.3
Basic implementation requirements for the inventory MIB v3.
         lumInventoryBasicComplV4 1.3.6.1.4.1.8708.2.3.1.2.4
Basic implementation requirements for the inventory MIB v4.
         lumInventoryBasicComplV5 1.3.6.1.4.1.8708.2.3.1.2.5
Basic implementation requirements for the inventory MIB v5.
         lumInventoryBasicComplV6 1.3.6.1.4.1.8708.2.3.1.2.6
Basic implementation requirements for the inventory MIB v6.
         lumInventoryBasicComplV7 1.3.6.1.4.1.8708.2.3.1.2.7
Basic implementation requirements for the inventory MIB v7.
         lumInventoryBasicComplV8 1.3.6.1.4.1.8708.2.3.1.2.8
Basic implementation requirements for the inventory MIB v8.
         lumInventoryBasicComplV9 1.3.6.1.4.1.8708.2.3.1.2.9
Basic implementation requirements for the inventory MIB v9.
         lumInventoryBasicComplV10 1.3.6.1.4.1.8708.2.3.1.2.10
Basic implementation requirements for the inventory MIB v10. (R28.0)
     lumInventoryMinimalGroups 1.3.6.1.4.1.8708.2.3.1.3
         inventoryGeneralMinimalGroupV1 1.3.6.1.4.1.8708.2.3.1.3.1
The minimal general inventory objects.
     lumInventoryMinimalCompl 1.3.6.1.4.1.8708.2.3.1.4
         lumInventoryMinimalComplV1 1.3.6.1.4.1.8708.2.3.1.4.1
Minimal implementation requirements for the inventory MIB v1.
         lumInventoryMinimalComplV2 1.3.6.1.4.1.8708.2.3.1.4.2
Minimal implementation requirements for the inventory MIB v1.
         lumInventoryMinimalComplV3 1.3.6.1.4.1.8708.2.3.1.4.3
Minimal implementation requirements for the inventory MIB v2.
 lumInventoryMIBObjects 1.3.6.1.4.1.8708.2.3.2
     invPhysical 1.3.6.1.4.1.8708.2.3.2.1
         invPhysTable 1.3.6.1.4.1.8708.2.3.2.1.1 no-access
This table contains one row per physical entity. There is always at least one row for an 'overall' physical entity.
             invPhysEntry 1.3.6.1.4.1.8708.2.3.2.1.1.1 no-access
Information about a particular physical entity. Each entry provides objects (invPhysicalDescr, invPhysicalVendorType, and invPhysicalClass) to help an NMS identify and characterize the entry, and objects (invPhysicalContainedIn and invPhysicalParentRelPos) to help an NMS relate the particular entry to other entries in this table.
                 invPhysIndex 1.3.6.1.4.1.8708.2.3.2.1.1.1.1 unsigned32 read-only
The index for this entry.
                 invPhysDescr 1.3.6.1.4.1.8708.2.3.2.1.1.1.2 snmpadminstring read-only
A textual description of physical entity. This object should contain a string which identifies the manufacturers name for the physical entity, and should be set to a distinct value for each version or model of the physical entity.
                 invPhysVendorType 1.3.6.1.4.1.8708.2.3.2.1.1.1.3 autonomoustype read-only
An indication of the vendor-specific hardware type of the physical entity. Note that this is different from the definition of MIB-IIs sysObjectID. An agent should set this object to a enterprise-specific registration identifier value indicating the specific equipment type in detail. The associated instance of invPhysClass is used to indicate the general type of hardware device. If no vendor-specific registration identifier exists for this physical entity, or the value is unknown by this agent, then the value { 0 0 } is returned.
                 invPhysContainedIn 1.3.6.1.4.1.8708.2.3.2.1.1.1.4 unsigned32 read-only
The value of invPhysIndex for the physical entity which 'contains' this physical entity. A value of zero indicates this physical entity is not contained in any other physical entity. Note that the set of 'containment' relationships define a strict hierarchy; that is, recursion is not allowed. In the event a physical entity is contained by more than one physical entity (e.g., double-wide modules), this object should identify the containing entity with the lowest value of invPhysIndex.
                 invPhysClass 1.3.6.1.4.1.8708.2.3.2.1.1.1.5 physicalclass read-only
An indication of the general hardware type of the physical entity. An agent should set this object to the standard enumeration value which most accurately indicates the general class of the physical entity, or the primary class if there is more than one. If no appropriate standard registration identifier exists for this physical entity, then the value 'other(1)' is returned. If the value is unknown by this agent, then the value 'unknown(2)' is returned.
                 invPhysParentRelPos 1.3.6.1.4.1.8708.2.3.2.1.1.1.6 integer32 read-only
An indication of the relative position of this 'child' component among all its 'sibling' components. Sibling components are defined as invPhysEntries which share the same instance values of each of the invPhysContainedIn and invPhysClass objects. An NMS can use this object to identify the relative ordering for all sibling components of a particular parent (identified by the invPhysContainedIn instance in each sibling entry). This value should match any external labeling of the physical component if possible. For example, for a container (e.g., card slot) labeled as 'slot #3', invPhysParentRelPos should have the value '3'. Note that the invPhysEntry for the module plugged in slot 3 should have an invPhysParentRelPos value of '1'. If the physical position of this component does not match any external numbering or clearly visible ordering, then user documentation or other external reference material should be used to determine the parent-relative position. If this is not possible, then the the agent should assign a consistent (but possibly arbitrary) ordering to a given set of 'sibling' components, perhaps based on internal representation of the components. If the agent cannot determine the parent-relative position for some reason, or if the associated value of invPhysContainedIn is '0', then the value '-1' is returned. Otherwise a non-negative integer is returned, indicating the parent-relative position of this physical entity. Parent-relative ordering normally starts from '1' and continues to 'N', where 'N' represents the highest positioned child entity. However, if the physical entities (e.g., slots) are labeled from a starting position of zero, then the first sibling should be associated with a invPhysParentRelPos value of '0'. Note that this ordering may be sparse or dense, depending on agent implementation. The actual values returned are not globally meaningful, as each 'parent' component may use different numbering algorithms. The ordering is only meaningful among siblings of the same parent component. The agent should retain parent-relative position values across reboots, either through algorithmic assignment or use of non-volatile storage.
                 invPhysName 1.3.6.1.4.1.8708.2.3.2.1.1.1.7 mgmtnamestring read-only
The textual name of the physical entity. The value of this object should be the name of the component as assigned by the local device and should be suitable for use in commands entered at the 'console' of the device. This might be a text name, such as 'console' or a simple component number (e.g., port or module number), such as '1', depending on the physical component naming syntax of the device. If there is no local name, or this object is otherwise not applicable, then this object contains a zero-length string. Note that the value of invPhysName for two physical entities will be the same in the event that the console interface does not distinguish between them, e.g., slot-1 and the card in slot-1.
                 invPhysHardwareRev 1.3.6.1.4.1.8708.2.3.2.1.1.1.8 snmpadminstring read-only
The vendor-specific hardware revision string for the physical entity. The preferred value is the hardware revision identifier actually printed on the component itself (if present). Note that if revision information is stored internally in a non-printable (e.g., binary) format, then the agent must convert such information to a printable format, in an implementation-specific manner. If no specific hardware revision string is associated with the physical component, or this information is unknown to the agent, then this object will contain a zero-length string.
                 invPhysFirmwareRev 1.3.6.1.4.1.8708.2.3.2.1.1.1.9 snmpadminstring read-only
The vendor-specific firmware revision string for the physical entity. Note that if revision information is stored internally in a non-printable (e.g., binary) format, then the agent must convert such information to a printable format, in an implementation-specific manner. If no specific firmware programs are associated with the physical component, or this information is unknown to the agent, then this object will contain a zero-length string.
                 invPhysProductDataRev 1.3.6.1.4.1.8708.2.3.2.1.1.1.10 snmpadminstring read-only
The vendor-specific product data revision string for the physical entity. Note that if revision information is stored internally in a non-printable (e.g., binary) format, then the agent must convert such information to a printable format, in an implementation-specific manner. If no specific software programs are associated with the physical component, or this information is unknown to the agent, then this object will contain a zero-length string.
                 invPhysSerialNum 1.3.6.1.4.1.8708.2.3.2.1.1.1.11 snmpadminstring read-only
The vendor-specific serial number string for the physical entity. The preferred value is the serial number string actually printed on the component itself (if present). On the first instantiation of an physical entity, the value of invPhysSerialNum associated with that entity is set to the correct vendor-assigned serial number, if this information is available to the agent. If a serial number is unknown or non-existent, the invPhysSerialNum will be set to a zero-length string instead.
                 invPhysMfgName 1.3.6.1.4.1.8708.2.3.2.1.1.1.12 snmpadminstring read-only
The name of the manufacturer of this physical component. The preferred value is the manufacturer name string actually printed on the component itself (if present). If the manufacturer name string associated with the physical component is unknown to the agent, then this object will contain a zero-length string.
                 invPhysModelName 1.3.6.1.4.1.8708.2.3.2.1.1.1.13 snmpadminstring read-only
The vendor-specific model name identifier string associated with this physical component. The preferred value is the customer-visible product/part number, which may be printed on the component itself. If the model name string associated with the physical component is unknown to the agent, then this object will contain a zero-length string.
                 invPhysIsFRU 1.3.6.1.4.1.8708.2.3.2.1.1.1.14 truthvalue read-only
This object indicates whether or not this physical entity is considered a 'field replaceable unit' by the vendor. If this object contains the value 'true(1)' then this invPhysEntry identifies a field replaceable unit. For all invPhysEntries which represent components that are permanently contained within a field replaceable unit, the value 'false(2)' should be returned for this object.
                 invPhysSoftwareRev 1.3.6.1.4.1.8708.2.3.2.1.1.1.15 snmpadminstring read-only
The vendor-specific software revision string for the physical entity. If no specific software revision string is associated with the physical component, or this information is unknown to the agent, then this object will contain a zero-length string.
                 invPhysSoftwareProduct 1.3.6.1.4.1.8708.2.3.2.1.1.1.16 snmpadminstring read-only
The vendor-specific software part/product number string for the physical entity. If no specific software part/product number string is associated with the physical component, or this information is unknown to the agent, then this object will contain a zero-length string.
                 invPhysClei 1.3.6.1.4.1.8708.2.3.2.1.1.1.17 displaystring read-only
The Common Language Equipment Identifier (CLEI) code for the product. The format is according to RFC 4152.
                 invPhysAid 1.3.6.1.4.1.8708.2.3.2.1.1.1.18 displaystring read-only
The access identifier (AID) of the equipment. The format is according to GR-833.
     invGeneral 1.3.6.1.4.1.8708.2.3.2.2
         invGeneralLastChangeTime 1.3.6.1.4.1.8708.2.3.2.2.1 dateandtime read-only
The time the inventory list was last changed.
         invGeneralTestAndIncr 1.3.6.1.4.1.8708.2.3.2.2.2 testandincr read-write
Protection against simultaneous access from multiple managers. See SNMPv2-TC.
         invGeneralMibSpecVersion 1.3.6.1.4.1.8708.2.3.2.2.3 displaystring read-write
The version of the MIB specification.
         invGeneralMibImplVersion 1.3.6.1.4.1.8708.2.3.2.2.4 displaystring read-write
The version of the MIB implementation.
         invGeneralConfigLastChangeTime 1.3.6.1.4.1.8708.2.3.2.2.5 dateandtime read-only
The time when the configuration of the MIB was last changed.
         invGeneralPhysTableSize 1.3.6.1.4.1.8708.2.3.2.2.6 unsigned32 read-only
Number of rows available in the physical entities list.
         invGeneralEntityTableSize 1.3.6.1.4.1.8708.2.3.2.2.7 unsigned32 read-only
Number of rows available in the logical entity list.
         invGeneralRelationTableSize 1.3.6.1.4.1.8708.2.3.2.2.8 unsigned32 read-only
Number of rows available in the relation list.
         invGeneralInsRemTableSize 1.3.6.1.4.1.8708.2.3.2.2.9 unsigned32 read-only
Number of rows available in the insert and remove list.
         invGeneralInsRemLastSeqNumber 1.3.6.1.4.1.8708.2.3.2.2.10 counter32 read-only
The sequence number last used when creating a new entry in the insert remove log.
     lumentisInvNotifications 1.3.6.1.4.1.8708.2.3.2.3
         invNotifyPrefix 1.3.6.1.4.1.8708.2.3.2.3.0
             invNotificationPhysAdded 1.3.6.1.4.1.8708.2.3.2.3.0.1
Sent when a physical entity is added to the inventory.
             invNotificationPhysRemoved 1.3.6.1.4.1.8708.2.3.2.3.0.2
Sent when a physical entity is removed from the inventory.
     invEntities 1.3.6.1.4.1.8708.2.3.2.4
         invEntityTable 1.3.6.1.4.1.8708.2.3.2.4.1 no-access
The entity table.
             invEntityEntry 1.3.6.1.4.1.8708.2.3.2.4.1.1 no-access
An entry in the entity table.
                 invEntityIndex 1.3.6.1.4.1.8708.2.3.2.4.1.1.1 unsigned32 read-only
An arbitrary index assigned to each entry.
                 invEntityName 1.3.6.1.4.1.8708.2.3.2.4.1.1.2 mgmtnamestring read-only
The management name of the object this entry is related to.
                 invEntityObject 1.3.6.1.4.1.8708.2.3.2.4.1.1.3 rowpointer read-only
Pointer to the object related to this entry.
                 invEntityClass 1.3.6.1.4.1.8708.2.3.2.4.1.1.4 entityclass read-only
Indicates the type of entity.
     invRelations 1.3.6.1.4.1.8708.2.3.2.5
         invRelationTable 1.3.6.1.4.1.8708.2.3.2.5.1 no-access
Relation table.
             invRelationEntry 1.3.6.1.4.1.8708.2.3.2.5.1.1 no-access
An entry in the relation table.
                 invRelationIndex 1.3.6.1.4.1.8708.2.3.2.5.1.1.1 unsigned32 read-only
An arbitrary index assigned to each entry.
                 invRelationEntityIndex1 1.3.6.1.4.1.8708.2.3.2.5.1.1.2 unsigned32 read-only
Index in to the entity table.
                 invRelationEntityName1 1.3.6.1.4.1.8708.2.3.2.5.1.1.3 mgmtnamestring read-only
Index in to the entity table.
                 invRelationType 1.3.6.1.4.1.8708.2.3.2.5.1.1.4 integer read-only
Indicates how entity 2 is related to entity 1. containedIn - Physical containment. Entity 2 is physically contained within entity 1. dependsOn - The correct function of entity 2 depends on the function of entity 1. Enumeration: 'dependsOn': 2, 'undefined': 0, 'containedIn': 1.
                 invRelationEntityIndex2 1.3.6.1.4.1.8708.2.3.2.5.1.1.5 unsigned32 read-only
Index in to the entity table.
                 invRelationEntityName2 1.3.6.1.4.1.8708.2.3.2.5.1.1.6 mgmtnamestring read-only
Name of the object.
     invInsRemLog 1.3.6.1.4.1.8708.2.3.2.6
         invInsRemTable 1.3.6.1.4.1.8708.2.3.2.6.1 no-access
This table contains one row per insert or remove event of any physical entity.
             invInsRemEntry 1.3.6.1.4.1.8708.2.3.2.6.1.1 no-access
Information about a particular insert or remove entry.
                 invInsRemIndex 1.3.6.1.4.1.8708.2.3.2.6.1.1.1 unsigned32 read-only
The index for this entry.
                 invInsRemName 1.3.6.1.4.1.8708.2.3.2.6.1.1.2 mgmtnamestring read-only
The management name of the object this entry is related to.
                 invInsRemEvent 1.3.6.1.4.1.8708.2.3.2.6.1.1.3 insremeventtype read-only
The type of event.
                 invInsRemTimestamp 1.3.6.1.4.1.8708.2.3.2.6.1.1.4 dateandtime read-only
The time when the event occurred.
                 invInsRemEquipmentType 1.3.6.1.4.1.8708.2.3.2.6.1.1.5 physicalclass read-only
The Part Number of the product.
                 invInsRemPhysicalLocation 1.3.6.1.4.1.8708.2.3.2.6.1.1.6 displaystring read-only
The physical location of the product.
                 invInsRemClei 1.3.6.1.4.1.8708.2.3.2.6.1.1.7 displaystring read-only
The Common Language Equipment Identifier (CLEI) code for the product.
                 invInsRemSerialNumber 1.3.6.1.4.1.8708.2.3.2.6.1.1.8 displaystring read-only
The serial number string for the physical entity.
                 invInsRemPartNumber 1.3.6.1.4.1.8708.2.3.2.6.1.1.9 displaystring read-only
The Part Number of the product.
                 invInsRemSeqNumber 1.3.6.1.4.1.8708.2.3.2.6.1.1.10 counter32 read-only
The last sequence number used when this event occurred.