LUM-IFPHYSICAL-MIB: View SNMP OID List / Download MIB

VENDOR: LUMENTIS AB


 Home MIB: LUM-IFPHYSICAL-MIB
Download as:   
LUM-REG, SNMPv2-CONF, SNMPv2-SMI, LUM-TC, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 lumIfPhysicalMIBModule 1.3.6.1.4.1.8708.1.1.47
   lumIfPhysicalConfs 1.3.6.1.4.1.8708.2.47.1
       lumIfPhysicalGroups 1.3.6.1.4.1.8708.2.47.1.1
       lumIfPhysicalCompl 1.3.6.1.4.1.8708.2.47.1.2
   lumIfPhysicalMIBObjects 1.3.6.1.4.1.8708.2.47.2
       ifPhysicalGeneral 1.3.6.1.4.1.8708.2.47.2.1
           ifPhysicalGeneralConfigLastChangeTime 1.3.6.1.4.1.8708.2.47.2.1.1
The time when the configuration of the MIB was last changed.
           ifPhysicalGeneralStateLastChangeTime 1.3.6.1.4.1.8708.2.47.2.1.2
The time when the state and/or configuration of the MIB was last changed.
           ifPhysicalGeneralIfPhysicalTrxTableSize 1.3.6.1.4.1.8708.2.47.2.1.3
Size of transceiver table
           ifPhysicalGeneralIfPhysicalTrxConfigLastChangeTime 1.3.6.1.4.1.8708.2.47.2.1.4
The time when the configuration of the table was last changed.
           ifPhysicalGeneralIfPhysicalTrxStateLastChangeTime 1.3.6.1.4.1.8708.2.47.2.1.5
The time when the state and/or configuration of the MIB was last changed.
           ifPhysicalGeneralIfPhysicalCageTableSize 1.3.6.1.4.1.8708.2.47.2.1.6
Size of transceiver table
           ifPhysicalGeneralIfPhysicalCageConfigLastChangeTime 1.3.6.1.4.1.8708.2.47.2.1.7
The time when the configuration of the table was last changed.
           ifPhysicalGeneralIfPhysicalCageStateLastChangeTime 1.3.6.1.4.1.8708.2.47.2.1.8
The time when the state and/or configuration of the MIB was last changed.
       ifPhysicalTrxList 1.3.6.1.4.1.8708.2.47.2.2
           ifPhysicalTrxTable 1.3.6.1.4.1.8708.2.47.2.2.1
The if physical trx interface list.
               ifPhysicalTrxEntry 1.3.6.1.4.1.8708.2.47.2.2.1.1
An entry in the ifPhysical trx list.
                   ifPhysicalTrxIndex 1.3.6.1.4.1.8708.2.47.2.2.1.1.1
An index assigned to each entry.
                   ifPhysicalTrxName 1.3.6.1.4.1.8708.2.47.2.2.1.1.2
The management name of the transceiver, for example trx:1:2:1-2, where the first number indicates subrack, the second slot number and the third/fourth are the physical port numbers.
                   ifPhysicalTrxConnIfBasicIfIndex 1.3.6.1.4.1.8708.2.47.2.2.1.1.3
An index describing to which index in ifBasicIf table this object is related to.
                   ifPhysicalTrxLaserBias 1.3.6.1.4.1.8708.2.47.2.2.1.1.4
Measures laser bias current value in tenth of mA (0.1 mA).
                   ifPhysicalTrxLaserTemp 1.3.6.1.4.1.8708.2.47.2.2.1.1.5
The actual laser temperature in units of 0.1 degrees Centigrades.
                   ifPhysicalTrxTrxClass 1.3.6.1.4.1.8708.2.47.2.2.1.1.6
String that describes the transceiver class.
                   ifPhysicalTrxTrxMedia 1.3.6.1.4.1.8708.2.47.2.2.1.1.7
Defines the transceiver media. For example optical or electrical.
                   ifPhysicalTrxActualTrxMedia 1.3.6.1.4.1.8708.2.47.2.2.1.1.8
Defines the media and capability of the TRX.
                   ifPhysicalTrxTxSignalStatus 1.3.6.1.4.1.8708.2.47.2.2.1.1.9
The state for outgoing (TX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK.
                   ifPhysicalTrxRxSignalStatus 1.3.6.1.4.1.8708.2.47.2.2.1.1.10
The state for incoming (RX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK.
                   ifPhysicalTrxTransmitterFailed 1.3.6.1.4.1.8708.2.47.2.2.1.1.11
Transmitter failed. The transceiver hardware has detected a failure in the transmitter part. Alarm - The transmitter has failed Ok - The transmitter is OK again
                   ifPhysicalTrxNonQualifiedTrx 1.3.6.1.4.1.8708.2.47.2.2.1.1.12
Non-qualified transceiver. The inserted transceiver does not have a legal manufacturer code. Alarm - A non-qualified transceiver is inserted. Ok - The transceiver is qualified.
                   ifPhysicalTrxTrxMissing 1.3.6.1.4.1.8708.2.47.2.2.1.1.13
Transceiver missing. An expected transceiver is missing. Alarm - An expected transceiver is missing. Ok - The missing transceiver is inserted.
                   ifPhysicalTrxTrxMediaMismatch 1.3.6.1.4.1.8708.2.47.2.2.1.1.14
Transceiver media mismatch. The TRX media does not match the expected one. Alarm - Invalid or mismatching trx media is detected. Ok - The (pluggable) transceiver or board is replaced, or the configuration is changed.
                   ifPhysicalTrxTrxRxState 1.3.6.1.4.1.8708.2.47.2.2.1.1.15
The current Rx state of the transciever, in case it is a coherent CFP. The unit is ready if state=Ready. The states could be one of the followings: Rx State: Init started. Rx State: Init ready. Rx State: Frequency ready. Rx State: Input signal received. Rx State: A/D Converter ready. Rx State: Dispersion compensated. Rx State: Ready.
                   ifPhysicalTrxTrxTxState 1.3.6.1.4.1.8708.2.47.2.2.1.1.16
The current Tx state of the transciever, in case it is a coherent CFP. The unit is ready if state=Ready. The states could be one of the followings: Tx State: Init started. Tx State: Init ready. Tx State: Data path locked. Tx State: Laser ready off. Tx State: Laser ready. Tx State: Laser bias ready. Tx State: Ready.
                   ifPhysicalTrxOpticalLayerMappingMismatch 1.3.6.1.4.1.8708.2.47.2.2.1.1.17
The inserted transceiver does not support the configuration of the optical layer mapping. alarm: A transceiver with other supported optical layer mapping than the requested mapping is inserted. ok: The transceiver with the non-requested optical layer mapping is removed, or the object is reconfigured.
                   ifPhysicalTrxPowerCycleReset 1.3.6.1.4.1.8708.2.47.2.2.1.1.18
When the attribute is set to reset the trx power cycle is re-initialised, meaning the trx is cold started. Then the attribute is set to normal again automatically. Note: This function is only to be used as a last resort to resolve a TRX deadlock. Please read I&C manual for further details before usage. reset - Re-initialises the trx power cycle normal - The trx power cycle is in normal state
                   ifPhysicalTrxUId 1.3.6.1.4.1.8708.2.47.2.2.1.1.19
An index assigned to each entry.
                   ifPhysicalTrxAid 1.3.6.1.4.1.8708.2.47.2.2.1.1.20
The access identifier (AID) of the trx. The format is according to GR-833.
                   ifPhysicalTrxPhysicalLocation 1.3.6.1.4.1.8708.2.47.2.2.1.1.21
The physical location of the trx. The format is according to GR-833.
                   ifPhysicalTrxPowerOutOfRange 1.3.6.1.4.1.8708.2.47.2.2.1.1.22
The power classification of the transceiver exceeds the design limit of the board. alarm: A transceiver with a power classification that exceeds the design limit of the board is inserted. ok: The transceiver with a power classification that exceeds the design limit of the board is removed.
                   ifPhysicalTrxLowTemp 1.3.6.1.4.1.8708.2.47.2.2.1.1.23
The temperature of the transceiver is below its designed limit. alarm: The temperature of the transceiver is below its designed limit. ok: The temperature of the transceiver is within designed limits.
                   ifPhysicalTrxCommunicationFailure 1.3.6.1.4.1.8708.2.47.2.2.1.1.24
The board is unable to communicate with the transceiver. alarm: Protocol errors detected on the transceiver control link. ok: No communication errors detected on the transceiver control link.
       ifPhysicalCageList 1.3.6.1.4.1.8708.2.47.2.3
           ifPhysicalCageTable 1.3.6.1.4.1.8708.2.47.2.3.1
The if physical cage list.
               ifPhysicalCageEntry 1.3.6.1.4.1.8708.2.47.2.3.1.1
An entry in the ifPhysical cage list.
                   ifPhysicalCageIndex 1.3.6.1.4.1.8708.2.47.2.3.1.1.1
An index assigned to each entry.
                   ifPhysicalCageName 1.3.6.1.4.1.8708.2.47.2.3.1.1.2
The management name of the cage, for example cage:1:2:1-2, where the first number indicates subrack, the second slot number and the third/fourth are the physical port numbers.
                   ifPhysicalCageConnIfBasicIfIndex 1.3.6.1.4.1.8708.2.47.2.3.1.1.3
An index describing to which index in ifBasicIf table this object is related to.
                   ifPhysicalCageSubrack 1.3.6.1.4.1.8708.2.47.2.3.1.1.4
The number of the subrack in which the cage module is present.
                   ifPhysicalCageSlot 1.3.6.1.4.1.8708.2.47.2.3.1.1.5
The number of the slot in which the cage module is present.
                   ifPhysicalCageAid 1.3.6.1.4.1.8708.2.47.2.3.1.1.6
The access identifier (AID) of the cage. The format is according to GR-833.
                   ifPhysicalCagePhysicalLocation 1.3.6.1.4.1.8708.2.47.2.3.1.1.7
The physical location of the cage. The format is according to GR-833.
                   ifPhysicalCageEquipped 1.3.6.1.4.1.8708.2.47.2.3.1.1.8
Is the entity equipped.
                   ifPhysicalCageUId 1.3.6.1.4.1.8708.2.47.2.3.1.1.9
An index assigned to each entry.