LLDP-EXT-DOT3-V2-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: LLDP-EXT-DOT3-V2-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, LLDP-V2-TC-MIB, LLDP-V2-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 lldpV2Xdot3MIB 1.3.111.2.802.1.1.13.1.5.4623
The LLDP Management Information Base extension module for IEEE 802.3 organizationally defined discovery information. In order to assure the uniqueness of the LLDP-MIB, lldpV2Xdot3MIB is branched from lldpV2Extensions using OUI value as the node. An OUI/'company_id' is a 24 bit globally unique assigned number referenced by various standards. Unless otherwise indicated, the references in this MIB module are to IEEE 802.1AB-2009. Copyright (C) IEEE (2009). This version of this MIB module is published as Annex F.6.5 of IEEE Std 802.1AB-2009; see the standard itself for full legal notices.
           lldpV2Xdot3Objects 1.3.111.2.802.1.1.13.1.5.4623.1
               lldpV2Xdot3Config 1.3.111.2.802.1.1.13.1.5.4623.1.1
                   lldpV2Xdot3PortConfigTable 1.3.111.2.802.1.1.13.1.5.4623.1.1.1 no-access
A table that controls selection of LLDP TLVs to be transmitted on individual ports.
                       lldpV2Xdot3PortConfigEntry 1.3.111.2.802.1.1.13.1.5.4623.1.1.1.1 no-access
LLDP configuration information that controls the transmission of IEEE 802.3 organizationally defined TLVs on LLDP transmission capable ports. This configuration object augments the lldpV2PortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpV2PortConfigEntry entry. Each active lldpV2Xdot3PortConfigEntry is restored from non-volatile storage (along with the corresponding lldpV2PortConfigEntry) after a re-initialization of the management system.
                           lldpV2Xdot3PortConfigTLVsTxEnable 1.3.111.2.802.1.1.13.1.5.4623.1.1.1.1.1 bits read-write
The lldpV2Xdot3PortConfigTLVsTxEnable, defined as a bitmap, includes the IEEE 802.3 organizationally defined set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network management. Each bit in the bitmap corresponds to an IEEE 802.3 subtype associated with a specific IEEE 802.3 optional TLV. The bit 0 is not used since there is no corresponding subtype. The bit 'macPhyConfigStatus(0)' indicates that LLDP agent should transmit 'MAC/PHY configuration/status TLV'. The bit 'powerViaMDI(1)' indicates that LLDP agent should transmit 'Power via MDI TLV'. The bit 'unused(2)' is no longer used; this was used for the 'Link Aggregation TLV' in the previous version. The bit 'maxFrameSize(3)' indicates that LLDP agent should transmit 'Maximum-frame-size TLV'. The default value for lldpV2Xdot3PortConfigTLVsTxEnable object is an empty set, which means no enumerated values are set. The value of this object is restored from non-volatile storage after a re-initialization of the management system. Bits: 'unused': 2, 'powerViaMDI': 1, 'macPhyConfigStatus': 0, 'maxFrameSize': 3.
               lldpV2Xdot3LocalData 1.3.111.2.802.1.1.13.1.5.4623.1.2
                   lldpV2Xdot3LocPortTable 1.3.111.2.802.1.1.13.1.5.4623.1.2.1 no-access
This table contains one row per port of Ethernet port information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agent.
                       lldpV2Xdot3LocPortEntry 1.3.111.2.802.1.1.13.1.5.4623.1.2.1.1 no-access
Information about a particular port component.
                           lldpV2Xdot3LocPortAutoNegSupported 1.3.111.2.802.1.1.13.1.5.4623.1.2.1.1.1 truthvalue read-only
The truth value used to indicate whether the given port (associated with the local system) supports Auto-negotiation.
                           lldpV2Xdot3LocPortAutoNegEnabled 1.3.111.2.802.1.1.13.1.5.4623.1.2.1.1.2 truthvalue read-only
The truth value used to indicate whether port Auto-negotiation is enabled on the given port associated with the local system.
                           lldpV2Xdot3LocPortAutoNegAdvertisedCap 1.3.111.2.802.1.1.13.1.5.4623.1.2.1.1.3 octet string read-only
This object contains the value (bitmap) of the ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636) which is associated with the given port on the local system.
                           lldpV2Xdot3LocPortOperMauType 1.3.111.2.802.1.1.13.1.5.4623.1.2.1.1.4 unsigned32 read-only
An integer value that indicates the operational MAU type of the given port on the local system. This object contains the integer value derived from the list position of the corresponding dot3MauType as listed in IETF RFC 4836 (or subsequent revisions) and is equal to the last number in the respective dot3MauType OID. For example, if the ifMauType object is dot3MauType1000BaseTHD which corresponds to {dot3MauType 29}, the numerical value of this field is 29. For MAU types not listed in RFC 4836 (or subsequent revisions), the value of this field shall be set to zero.
                   lldpV2Xdot3LocPowerTable 1.3.111.2.802.1.1.13.1.5.4623.1.2.2 no-access
This table contains one row per port of power ethernet information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agent.
                       lldpV2Xdot3LocPowerEntry 1.3.111.2.802.1.1.13.1.5.4623.1.2.2.1 no-access
Information about a particular port component.
                           lldpV2Xdot3LocPowerPortClass 1.3.111.2.802.1.1.13.1.5.4623.1.2.2.1.1 lldpv2powerportclass read-only
The value that identifies the port Class of the given port associated with the local system.
                           lldpV2Xdot3LocPowerMDISupported 1.3.111.2.802.1.1.13.1.5.4623.1.2.2.1.2 truthvalue read-only
The truth value used to indicate whether the MDI power is supported on the given port associated with the local system.
                           lldpV2Xdot3LocPowerMDIEnabled 1.3.111.2.802.1.1.13.1.5.4623.1.2.2.1.3 truthvalue read-only
The truth value used to identify whether MDI power is enabled on the given port associated with the local system.
                           lldpV2Xdot3LocPowerPairControlable 1.3.111.2.802.1.1.13.1.5.4623.1.2.2.1.4 truthvalue read-only
The truth value is derived from the value of pethPsePortPowerPairsControlAbility object (defined in IETF RFC 3621) and is used to indicate whether the pair selection can be controlled on the given port associated with the local system.
                           lldpV2Xdot3LocPowerPairs 1.3.111.2.802.1.1.13.1.5.4623.1.2.2.1.5 unsigned32 read-only
This object contains the value of the pethPsePortPowerPairs object (defined in IETF RFC 3621) which is associated with the given port on the local system.
                           lldpV2Xdot3LocPowerClass 1.3.111.2.802.1.1.13.1.5.4623.1.2.2.1.6 unsigned32 read-only
This object contains the value of the pethPsePortPowerClassifications object (defined in IETF RFC 3621) which is associated with the given port on the local system.
                   lldpV2Xdot3LocMaxFrameSizeTable 1.3.111.2.802.1.1.13.1.5.4623.1.2.3 no-access
This table contains one row per port of maximum frame size information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agent.
                       lldpV2Xdot3LocMaxFrameSizeEntry 1.3.111.2.802.1.1.13.1.5.4623.1.2.3.1 no-access
Maximum Frame Size information about a particular port component.
                           lldpV2Xdot3LocMaxFrameSize 1.3.111.2.802.1.1.13.1.5.4623.1.2.3.1.1 unsigned32 read-only
An integer value indicating the maximum supported frame size in octets on the given port of the local system.
               lldpV2Xdot3RemoteData 1.3.111.2.802.1.1.13.1.5.4623.1.3
                   lldpV2Xdot3RemPortTable 1.3.111.2.802.1.1.13.1.5.4623.1.3.1 no-access
This table contains Ethernet port information (as a part of the LLDP 802.3 organizational extension) of the remote system.
                       lldpV2Xdot3RemPortEntry 1.3.111.2.802.1.1.13.1.5.4623.1.3.1.1 no-access
Information about a particular physical network connection.
                           lldpV2Xdot3RemPortAutoNegSupported 1.3.111.2.802.1.1.13.1.5.4623.1.3.1.1.1 truthvalue read-only
The truth value used to indicate whether the given port (associated with remote system) supports Auto-negotiation.
                           lldpV2Xdot3RemPortAutoNegEnabled 1.3.111.2.802.1.1.13.1.5.4623.1.3.1.1.2 truthvalue read-only
The truth value used to indicate whether port Auto-negotiation is enabled on the given port associated with the remote system.
                           lldpV2Xdot3RemPortAutoNegAdvertisedCap 1.3.111.2.802.1.1.13.1.5.4623.1.3.1.1.3 octet string read-only
This object contains the value (bitmap) of the ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636) which is associated with the given port on the remote system.
                           lldpV2Xdot3RemPortOperMauType 1.3.111.2.802.1.1.13.1.5.4623.1.3.1.1.4 unsigned32 read-only
An integer value that indicates the operational MAU type of the sending device. This object contains the integer value derived from the list position of the corresponding dot3MauType as listed in in IETF RFC 4836 (or subsequent revisions) and is equal to the last number in the respective dot3MauType OID. For example, if the ifMauType object is dot3MauType1000BaseTHD which corresponds to {dot3MauType 29}, the numerical value of this field is 29. For MAU types not listed in RFC 4836 (or subsequent revisions), the value of this field shall be set to zero.
                   lldpV2Xdot3RemPowerTable 1.3.111.2.802.1.1.13.1.5.4623.1.3.2 no-access
This table contains Ethernet power information (as a part of the LLDP 802.3 organizational extension) of the remote system.
                       lldpV2Xdot3RemPowerEntry 1.3.111.2.802.1.1.13.1.5.4623.1.3.2.1 no-access
Information about a particular physical network connection.
                           lldpV2Xdot3RemPowerPortClass 1.3.111.2.802.1.1.13.1.5.4623.1.3.2.1.1 lldpv2powerportclass read-only
The value that identifies the port Class of the given port associated with the remote system.
                           lldpV2Xdot3RemPowerMDISupported 1.3.111.2.802.1.1.13.1.5.4623.1.3.2.1.2 truthvalue read-only
The truth value used to indicate whether the MDI power is supported on the given port associated with the remote system.
                           lldpV2Xdot3RemPowerMDIEnabled 1.3.111.2.802.1.1.13.1.5.4623.1.3.2.1.3 truthvalue read-only
The truth value used to identify whether MDI power is enabled on the given port associated with the remote system.
                           lldpV2Xdot3RemPowerPairControlable 1.3.111.2.802.1.1.13.1.5.4623.1.3.2.1.4 truthvalue read-only
The truth value is derived from the value of pethPsePortPowerPairsControlAbility object (defined in IETF RFC 3621) and is used to indicate whether the pair selection can be controlled on the given port associated with the remote system.
                           lldpV2Xdot3RemPowerPairs 1.3.111.2.802.1.1.13.1.5.4623.1.3.2.1.5 unsigned32 read-only
This object contains the value of the pethPsePortPowerPairs object (defined in IETF RFC 3621) which is associated with the given port on the remote system.
                           lldpV2Xdot3RemPowerClass 1.3.111.2.802.1.1.13.1.5.4623.1.3.2.1.6 unsigned32 read-only
This object contains the value of the pethPsePortPowerClassifications object (defined in IETF RFC 3621) which is associated with the given port on the remote system.
                   lldpV2Xdot3RemMaxFrameSizeTable 1.3.111.2.802.1.1.13.1.5.4623.1.3.3 no-access
This table contains one row per port/destination address pair of maximum frame size information (as a part of the LLDP IEEE 802.3 organizational extension) of the remote system.
                       lldpV2Xdot3RemMaxFrameSizeEntry 1.3.111.2.802.1.1.13.1.5.4623.1.3.3.1 no-access
Maximum Frame Size information about a particular port component.
                           lldpV2Xdot3RemMaxFrameSize 1.3.111.2.802.1.1.13.1.5.4623.1.3.3.1.1 unsigned32 read-only
An integer value indicating the maximum supported frame size in octets on the port component associated with the remote system.
           lldpV2Xdot3Conformance 1.3.111.2.802.1.1.13.1.5.4623.2
               lldpV2Xdot3Compliances 1.3.111.2.802.1.1.13.1.5.4623.2.1
                   lldpV2Xdot3TxRxCompliance 1.3.111.2.802.1.1.13.1.5.4623.2.1.1
A compliance statement for SNMP entities that implement the LLDP 802.3 organizational extension MIB. This group is mandatory for all agents that implement the LLDP 802.3 organizational extension in TX and/or RX mode. This version defines compliance requirements for V2 of the LLDP MIB.
                   lldpV2Xdot3TxCompliance 1.3.111.2.802.1.1.13.1.5.4623.2.1.2
The compliance statement for SNMP entities which implement the LLDP 802.3 organizational extension MIB. This group is mandatory for agents which implement the LLDP 802.3 organizational extension in the TX mode. This version defines compliance requirements for V2 of the LLDP MIB.
                   lldpV2Xdot3RxCompliance 1.3.111.2.802.1.1.13.1.5.4623.2.1.3
The compliance statement for SNMP entities which implement the LLDP 802.3 organizational extension MIB. This group is mandatory for agents which implement the LLDP 802.3 organizational extension in the RX mode. This version defines compliance requirements for V2 of the LLDP MIB.
               lldpV2Xdot3Groups 1.3.111.2.802.1.1.13.1.5.4623.2.2
                   lldpV2Xdot3ConfigGroup 1.3.111.2.802.1.1.13.1.5.4623.2.2.1
The collection of objects which are used to configure the LLDP 802.3 organizational extension implementation behavior.
                   lldpV2Xdot3LocSysGroup 1.3.111.2.802.1.1.13.1.5.4623.2.2.2
The collection of objects which are used to represent LLDP 802.3 organizational extension Local Device Information.
                   lldpV2Xdot3RemSysGroup 1.3.111.2.802.1.1.13.1.5.4623.2.2.3
The collection of objects which are used to represent LLDP 802.3 organizational extension Local Device Information.