LANPLEX-OPT-FDDI-MIB-1-1-2: View SNMP OID List / Download MIB

VENDOR: SYNERNETICS


 Home MIB: LANPLEX-OPT-FDDI-MIB-1-1-2
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, DRAFT-FDDI-MIB-VER-3-2

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 synernetics 1.3.6.1.4.1.114
         lanplex 1.3.6.1.4.1.114.1
             lanplexOptFddi 1.3.6.1.4.1.114.1.10
                   lpOptSMT 1.3.6.1.4.1.114.1.10.1
                       lpOptSMTTable 1.3.6.1.4.1.114.1.10.1.1 no-access
A list of optional SMT entries. The number of entries shall not exceed the value of snmpFddiSMTNumber.
                           lpOptSMTEntry 1.3.6.1.4.1.114.1.10.1.1.1 no-access
An optional SMT entry containing information common to a given optional SMT.
                               lpOptSMTIndex 1.3.6.1.4.1.114.1.10.1.1.1.1 integer read-only
A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
                               lpOptSMTManufacturerOUI 1.3.6.1.4.1.114.1.10.1.1.1.2 octet string read-only
The three octets of manufacturer data which make up the manufacturerOUI component.
                               lpOptSMTManufacturerData 1.3.6.1.4.1.114.1.10.1.1.1.3 octet string read-only
The 29 octets of manufacturer data which make up the manufacturerData component.
                               lpOptSMTHoldState 1.3.6.1.4.1.114.1.10.1.1.1.4 integer read-only
This variable indicates the current state of the Hold function. The value 'not-holding' is the default and initial value. The value must be set to 'not-holding' as part of Active_Actions and when the conditions causing 'holding-prm' or 'holding-sec' are no longer true. The value 'holding-prm' must be set when the condition (notTR_Flag & not RE_Flag & (PC_LS=QLS | LEM_Fail | TNE>NS_Max | (not LS_Flag & TPC > T_Out))) is satisfied in state PC8:ACTIVE for the A Port. The value 'holding-sec' must be set when the condition (notTR_Flag & not RE_Flag & (PC_LS=QLS | LEM_Fail | TNE>NS_Max | (not LS_Flag & TPC > T_Out))) is satisfied in state PC8:ACTIVE for the B Port. Enumeration: 'holding-prm': 3, 'not-implemented': 1, 'holding-sec': 4, 'not-holding': 2.
                               lpOptSMTSetCount 1.3.6.1.4.1.114.1.10.1.1.1.5 integer read-only
This variable is composed of a count incremented in response to a Set operation on the MIB, and the time of the change, however only the count is reported here (refer to ANSI SMT 8.4.1).
                               lpOptSMTLastSetStationId 1.3.6.1.4.1.114.1.10.1.1.1.6 fddismtstationidtype read-only
The Station ID of the station that effected the last change in the FDDI MIB.
                   lpOptMAC 1.3.6.1.4.1.114.1.10.2
                       lpOptMACBridgeFunctionTable 1.3.6.1.4.1.114.1.10.2.1 no-access
A list of MAC bridge function entries.
                           lpOptMACBridgeFunctionEntry 1.3.6.1.4.1.114.1.10.2.1.1 no-access
Bridge function information for a given MAC within a given SMT.
                               lpOptMACBridgeFunctionSMTIndex 1.3.6.1.4.1.114.1.10.2.1.1.1 integer read-only
A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
                               lpOptMACBridgeFunctionMACIndex 1.3.6.1.4.1.114.1.10.2.1.1.2 integer read-only
Index variable for uniquely identifying the MAC object instances.
                               lpOptMACBridgeFunctions 1.3.6.1.4.1.114.1.10.2.1.1.3 integer read-only
Indicates the MAC's optional bridging functions. The Value -1 is used to indicate that bridging is not supported by this MAC. The value is a sum. This value initially takes the value zero, then for each function present, 2 raised to a power is added to the sum. The powers are according to the following table: Function Power tb 0 -- Transparent bridging active sr 1 -- Src routing active srt 2 -- Src routing transparent active
                       lpOptMACTPriTable 1.3.6.1.4.1.114.1.10.2.2 no-access
A list of MAC T-Pri entries.
                           lpOptMACTPriEntry 1.3.6.1.4.1.114.1.10.2.2.1 no-access
A collection of T-Pri information for a given MAC within a given SMT.
                               lpOptMACTPriSMTIndex 1.3.6.1.4.1.114.1.10.2.2.1.1 integer read-only
A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
                               lpOptMACTPriMACIndex 1.3.6.1.4.1.114.1.10.2.2.1.2 integer read-only
Index variable for uniquely identifying the MAC object instances.
                               lpOptMACTPri0 1.3.6.1.4.1.114.1.10.2.2.1.3 fdditimenano read-only
This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units.
                               lpOptMACTPri1 1.3.6.1.4.1.114.1.10.2.2.1.4 fdditimenano read-only
This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units.
                               lpOptMACTPri2 1.3.6.1.4.1.114.1.10.2.2.1.5 fdditimenano read-only
This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units.
                               lpOptMACTPri3 1.3.6.1.4.1.114.1.10.2.2.1.6 fdditimenano read-only
This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units.
                               lpOptMACTPri4 1.3.6.1.4.1.114.1.10.2.2.1.7 fdditimenano read-only
This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units.
                               lpOptMACTPri5 1.3.6.1.4.1.114.1.10.2.2.1.8 fdditimenano read-only
This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units.
                               lpOptMACTPri6 1.3.6.1.4.1.114.1.10.2.2.1.9 fdditimenano read-only
This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units.
                   lpOptPATH 1.3.6.1.4.1.114.1.10.3
                       lpOptPATHRingTable 1.3.6.1.4.1.114.1.10.3.1 no-access
A list of PATH ring entries.
                           lpOptPATHRingEntry 1.3.6.1.4.1.114.1.10.3.1.1 no-access
Ring latency, trace status, and T-Rmode information for a given PATH within a given SMT.
                               lpOptPATHRingSMTIndex 1.3.6.1.4.1.114.1.10.3.1.1.1 integer read-only
A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
                               lpOptPATHRingPATHIndex 1.3.6.1.4.1.114.1.10.3.1.1.2 integer read-only
Index variable for uniquely identifying the primary, secondary and local PATH object instances. Local PATH object instances are represented with integer values 3 to 255.
                               lpOptPATHRingLatency 1.3.6.1.4.1.114.1.10.3.1.1.3 fdditimenano read-write
Gives the total accumulated latency of the ring associated with this path. May be measured directly by the station or calculated by a management station. Values of this object are reported in 1 ns units.
                               lpOptPATHTraceStatus 1.3.6.1.4.1.114.1.10.3.1.1.4 integer read-only
This attribute indicates the current trace status of the path. The value is a sum which represents all of the trace status information which applies. This value initially takes the value zero, then for each condition which applies, 2 raised to a power is added to the sum. the powers are according to the following table: TraceStatus Power traceinitiated 0 tracepropragated 1 traceterminated 2 tracetimeout 3
                               lpOptPATHT_Rmode 1.3.6.1.4.1.114.1.10.3.1.1.5 fdditimenano read-write
Used by RMT to limit the duration of restricted dialogs on a path. This object is reported in 1 ns units.
                       lpOptPATHSbaTable 1.3.6.1.4.1.114.1.10.3.2 no-access
A list of PATH Sba entries.
                           lpOptPATHSbaEntry 1.3.6.1.4.1.114.1.10.3.2.1 no-access
Sba information for a given PATH within a given SMT.
                               lpOptPATHSbaSMTIndex 1.3.6.1.4.1.114.1.10.3.2.1.1 integer read-only
A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
                               lpOptPATHSbaPATHIndex 1.3.6.1.4.1.114.1.10.3.2.1.2 integer read-only
Index variable for uniquely identifying the primary, secondary and local PATH object instances. Local PATH object instances are represented with integer values 3 to 255.
                               lpOptPATHSbaPayload 1.3.6.1.4.1.114.1.10.3.2.1.3 integer read-write
The payload portion of the Synchronous Bandwidth Allocation for thi path. This value represents the maximum number of bytes of data allocated for transmission per 125 microseconds.
                               lpOptPATHSbaOverhead 1.3.6.1.4.1.114.1.10.3.2.1.4 integer read-write
The overhead portion of the Synchronous Bandwith Allocation for this path. This value repersents the maximum number of bytes overhead (token capture, frame header, etc.) used pre negotiated Target Token Rotation Time (T_neg).
                               lpOptPATHSbaAvailable 1.3.6.1.4.1.114.1.10.3.2.1.5 integer read-write
This value is the maximum Synchronous Bandwith available for a path in bytes per second.
                   lpOptPORT 1.3.6.1.4.1.114.1.10.4
                       lpOptPORTTable 1.3.6.1.4.1.114.1.10.4.1 no-access
A list of optional PORT entries.
                           lpOptPORTEntry 1.3.6.1.4.1.114.1.10.4.1.1 no-access
MAC loop time and EB error count information for a given PORT within a given SMT.
                               lpOptPORTSMTIndex 1.3.6.1.4.1.114.1.10.4.1.1.1 integer read-only
A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
                               lpOptPORTIndex 1.3.6.1.4.1.114.1.10.4.1.1.2 integer read-only
Index variable for uniquely identifying the PORT object instances.
                               lpOptPORTMACLoopTime 1.3.6.1.4.1.114.1.10.4.1.1.3 fdditimenano read-write
This attribute controls the value used for T_Next(9) (see 9.4.4.2.3). This object is reported in 1 ns units.
                               lpOptPORTEBErrorCt 1.3.6.1.4.1.114.1.10.4.1.1.4 counter read-only
A count that should as closely as possible match the times an Elasticity Buffer Error has occurred while in active line state.
                       lpOptPORTLSTable 1.3.6.1.4.1.114.1.10.4.2 no-access
A list of optional PORT line state entries.
                           lpOptPORTLSEntry 1.3.6.1.4.1.114.1.10.4.2.1 no-access
Maintenance line state and PC line state information for a given PORT within a given SMT.
                               lpOptPORTLSSMTIndex 1.3.6.1.4.1.114.1.10.4.2.1.1 integer read-only
A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
                               lpOptPORTLSPORTIndex 1.3.6.1.4.1.114.1.10.4.2.1.2 integer read-only
Index variable for uniquely identifying the PORT object instances.
                               lpOptPORTMaintLS 1.3.6.1.4.1.114.1.10.4.2.1.3 integer read-write
The PORT Maintenance Line State specifies the line state (Maint_LS) to be transmitted when the PCM state machine for the port is in state PC9 Maint. Enumeration: 'receive-unknown': 6, 'halt': 4, 'receive-noise': 7, 'quiet': 1, 'receive-active': 5, 'idle': 2, 'master': 3.
                               lpOptPORTPCLS 1.3.6.1.4.1.114.1.10.4.2.1.4 integer read-only
This attribute indicates the line state (PC_LS) received by the port. Enumeration: 'receive-unknown': 6, 'halt': 4, 'receive-noise': 7, 'quiet': 1, 'receive-active': 5, 'idle': 2, 'master': 3.
                     lpOptSMTHoldCondition 1.3.6.1.4.1.114.1.100.1
Generated when fddiSMTHoldState (fddimibSMTHoldState) assumes the state holding-prm or holding-sec. This notification is a Condition in the Status Report Protocol (see 7.2.7 and 8.3).
                     lpOptSMTPeerWrapCondition 1.3.6.1.4.1.114.1.100.2
This condition is active when fddiSMTPeerWrapFlag (fddimibSMTPeerWrapFlag) is set. This notification is a Condition in the Status Report Protocol (see 7.2.7 and 8.3).
                     lpOptMACDuplicateAddressCondition 1.3.6.1.4.1.114.1.100.3
This condition is active when either fddiMACDA-Flag (fddimibMACDaFlag) or fddiMACUNDA-Flag (fddimibMACUnaDaFlag) is set. This event is handled as a Condition in the Status Report Protocol (see 7.2.7 and 8.3).
                     lpOptMACFrameErrorCondition 1.3.6.1.4.1.114.1.100.4
Generated when the fddiMACFrameErrorRatio (fddimibMACFrameErrorRatio) is greater than or equal to fddiMACFrameErrorThreshold (fddimibMACFrameErrorThreshold). This event is handled as a Condition in the Status Report Protocol (see 7.2.7 and 8.3).
                     lpOptMACNotCopiedCondition 1.3.6.1.4.1.114.1.100.5
Generated when the fddiMACNotCopiedRatio (fddimibMACNotCopiedRatio) is greater than or equal to the fddiMACNotCopiedThreshold (lpOptMACNotCopiedThreshold). This event is handled as a Condition in the Status Report Protocol (see 7.2.7 and 8.3).
                     lpOptMACNeighborChangeEvent 1.3.6.1.4.1.114.1.100.6
Generated when a change in a MAC's upstream neighbor address or downstream neighbor address is detected. (see 7.2.7 and 8.3).
                     lpOptMACPathChangeEvent 1.3.6.1.4.1.114.1.100.7
This event is generated when the value of the fddiMACCurrentPath (fddimibMACCurrentPath) changes. This event shall be supressed if the value changes from isolated to local or local to isolated (see 7.2.7 and 8.3).
                     lpOptPORTLerCondition 1.3.6.1.4.1.114.1.100.8
This condition becomes active when the value of fddiPORTLer-Estimate (fddimibPORTLerEstimate) is less than or equal to fddiPORTLer-Alarm (fddimibPORTLerAlarm). This will be reported with the Status Report Frames (SRF) (see 7.2.7 and 8.3).
                     lpOptPORTUndesiredConnAttemptEvent 1.3.6.1.4.1.114.1.100.9
Generated when an undesired connection attempt has been made (see 5.2.4, 7.2.7, and 8.3).
                     lpOptPORTEBErrorCondition 1.3.6.1.4.1.114.1.100.10
Generated when the Elasticity Buffer Error-Ct (lpOptPORTEBErrorCt) increments. This is handled as a condition in the Status Report Protocol. It is generated when an increment occurs in the station's sampling period (see 7.2.7 and 8.3).
                     lpOptPORTPathChangeEvent 1.3.6.1.4.1.114.1.100.11
This event is generated when the value of the fddiPORTCurrentPath (lpOptPORTCurrentPath) changes. This event shall be surpressed if the value changes from isolated to local or local to isolated (see 7.2.7 and 8.3).