LANOPTICS-SYSTEM-MIB: View SNMP OID List / Download MIB

VENDOR: LANOPTICS LTD., ISRAEL


 Home MIB: LANOPTICS-SYSTEM-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 lanOptics 1.3.6.1.4.1.224
         lanOpticsSystem 1.3.6.1.4.1.224.2
             snSysDirectory 1.3.6.1.4.1.224.2.1 displaystring read-only
Gives the agent directory content (make DOS DIR command on agent directory).
             snAgentVersion 1.3.6.1.4.1.224.2.2 integer read-only
Gives the agent major version in the high order word and the minor version in low order word.
             lanOpticsSystemCMOS 1.3.6.1.4.1.224.2.3
                 lanOpticsSystemCMOSIp 1.3.6.1.4.1.224.2.3.1
                     snSysCMOSIpInterfaceTable 1.3.6.1.4.1.224.2.3.1.1 no-access
A list of network interfaces.
                         snSysCMOSIpInterfaceEntry 1.3.6.1.4.1.224.2.3.1.1.1 no-access
An interface entry containing the Ipaddress and net-mask.
                             snSysCMOSIpIpAddr 1.3.6.1.4.1.224.2.3.1.1.1.1 ipaddress read-write
Gives the interface's IpAddress
                             snSysCMOSIpNetMask 1.3.6.1.4.1.224.2.3.1.1.1.2 ipaddress read-write
Gives the interfaces's netmask
                     snSysCMOSIpDefGw 1.3.6.1.4.1.224.2.3.1.2 ipaddress read-write
Gives the agent's default gateway.
                     snSysCMOSIpTFTPOp 1.3.6.1.4.1.224.2.3.1.3 integer read-write
Gives the TFTP policy: 1 - No TFTP, 2 - Optional, 3 - Always Enumeration: 'limited': 2, 'continuous': 3, 'noTFTP': 1.
                     snSysCMOSIpTFTPAddr 1.3.6.1.4.1.224.2.3.1.4 ipaddress read-write
Gives the TFTP server Ip address.
                     snSysCMOSIpTFTPFileName 1.3.6.1.4.1.224.2.3.1.5 displaystring read-write
Gives the boot file name at the server (full path).
                     snSysCMOSIpTFTPDrive 1.3.6.1.4.1.224.2.3.1.6 integer read-write
Gives the TFTP operation destination drive (value of ASCII character). Enumeration: 'driveD': 44, 'driveB': 42, 'driveC': 43, 'driveA': 41.
                 lanOpticsSystemCMOSHub 1.3.6.1.4.1.224.2.3.2
                     snSysCMOSHubSlotConfigTable 1.3.6.1.4.1.224.2.3.2.1 no-access
A list of slots entries. Each entry in this table, contains the last 20 operations performed on the slot.
                         snSysCMOSHubSlotConfigEntry 1.3.6.1.4.1.224.2.3.2.1.1 no-access
                             snSysSlotLastOperations 1.3.6.1.4.1.224.2.3.2.1.1.1 octet string read-write
A description of last 20 operations performed, on the slot
                             snSysResetSlotQueue 1.3.6.1.4.1.224.2.3.2.1.1.2 integer read-write
Resets the last 20 operations queue.
                     snSysCMOSHubSaveHubFunctions 1.3.6.1.4.1.224.2.3.2.2 integer read-write
Save (2) /Do not Save (1) Hub managment functions in non-volatile memory. Enumeration: 'not-saved': 1, 'saved': 2.
                 lanOpticsSystemCMOSRPL 1.3.6.1.4.1.224.2.3.3
                     snSysCMOSRPLMode 1.3.6.1.4.1.224.2.3.3.1 integer read-write
Determine if the image will be loaded through RPL at next boot: RPL off - 1, RPL on - 2. Enumeration: 'rpl-off': 1, 'rpl-on': 2.
                     snSysCMOSFlashMode 1.3.6.1.4.1.224.2.3.3.2 integer read-write
Determine if the image will be loaded from flash memory at next boot : flash on - 2, flash off - 1. Enumeration: 'flash-on': 2, 'flash-off': 1.
                 lanOpticsSystemCMOSSerial 1.3.6.1.4.1.224.2.3.4
                     snSysCMOSSerialMode 1.3.6.1.4.1.224.2.3.4.1 integer read-write
Determine the serial port usage mode : Proprietary - 1, SLIP - 2, None - 3. Enumeration: 'none': 3, 'proprietary': 1, 'slip': 2.
                     snSysCMOSSerialComSelect 1.3.6.1.4.1.224.2.3.4.2 integer read-write
Determine which COM port is used. Enumeration: 'sr-COM2': 2, 'sr-COM1': 1.
                     snSysCMOSSerialBaudRate 1.3.6.1.4.1.224.2.3.4.3 integer read-write
Determine the serial port baud rate : 1200 - 1, 2400 - 2, 4800 - 3, 9600 - 4, 19200 - 5, 38300 - 6, 57600 - 7 Enumeration: 'baud1200': 1, 'baud19200': 5, 'baud38300': 6, 'baud2400': 2, 'baud4800': 3, 'baud9600': 4, 'baud57600': 7.
                     snSysCMOSSerialWordLength 1.3.6.1.4.1.224.2.3.4.4 integer read-write
Determine the data bits length : 7 Bits - 1, 8 Bits -2 Enumeration: 'bits-8': 2, 'bits-7': 1.
                     snSysCMOSSerialStopBits 1.3.6.1.4.1.224.2.3.4.5 integer read-write
Determine the number of stop bits; values allowed : 1 Bit - 1, 1.5 Bits - 2, 2 Bits - 3. Enumeration: 'bits-1': 1, 'bits-15': 2, 'bits-2': 3.
                     snSysCMOSSerialParityCheck 1.3.6.1.4.1.224.2.3.4.6 integer read-write
Determine the parity check policy : Even - 1, Odd - 2, None - 3. Enumeration: 'even': 1, 'none': 3, 'odd': 2.
                 lanOpticsSystemCMOSSRAM 1.3.6.1.4.1.224.2.3.5
                     snSysCMOSSRAMKeepAliveSecInterval 1.3.6.1.4.1.224.2.3.5.1 integer read-write
Determine the interval of the keep alive frame in seconds
                 lanOpticsSystemCMOSSNMP 1.3.6.1.4.1.224.2.3.6
                     snSysCMOSSNMPCommunitiesNum 1.3.6.1.4.1.224.2.3.6.1 integer read-only
Keeps the number of communities.
                     snSysCMOSSNMPTrapManagersNum 1.3.6.1.4.1.224.2.3.6.2 integer read-only
Keeps the number of managers that traps are send to.
                     snSysCMOSSNMPCommunitiesTable 1.3.6.1.4.1.224.2.3.6.3 no-access
A table containing the SNMP communities
                         snSysCMOSSNMPCommunitiesEntry 1.3.6.1.4.1.224.2.3.6.3.1 no-access
An entry community info
                             snSysCMOSSNMPCommunityName 1.3.6.1.4.1.224.2.3.6.3.1.1 displaystring read-write
This variable will give the community name.
                             snSysCMOSSNMPCommunityPrivs 1.3.6.1.4.1.224.2.3.6.3.1.2 integer read-write
This variable will give the community privilages: Read Only - 1, Read/Write - 2. Enumeration: 'read-Write': 2, 'read-Only': 1.
                     snSysCMOSSNMPTrapCommunitiesTable 1.3.6.1.4.1.224.2.3.6.4 no-access
A table containing the SNMP communities
                         snSysCMOSSNMPTrapCommunitiesEntry 1.3.6.1.4.1.224.2.3.6.4.1 no-access
An entry of trap IP destinations.
                             snSysCMOSSNMPTrapCommunityIpAddr 1.3.6.1.4.1.224.2.3.6.4.1.1 ipaddress read-write
This variable gives a manager IP address for traps destination.
                 lanOpticsSystemCMOSACCESS 1.3.6.1.4.1.224.2.3.7
                     snSysCMOSACCESSOffset 1.3.6.1.4.1.224.2.3.7.1 integer read-write
Gives the offset in the CMOS array. For internal use only
                     snSysCMOSACCESSLength 1.3.6.1.4.1.224.2.3.7.2 integer read-write
Gives the length (max 512) in the CMOS array. For internal use only,
                     snSysCMOSACCESSSequence 1.3.6.1.4.1.224.2.3.7.3 integer read-write
Gives a sequnce of bytes from CMOS array. For internal use only
                 lanOpticsSystemCMOSBRDG 1.3.6.1.4.1.224.2.3.8
                     snSysCMOSBRDGradius 1.3.6.1.4.1.224.2.3.8.1 integer read-write
Sets the discovery radius. Value = 0-7. 0=disable bridge.
                     snSysCMOSBRDGlinkNumber 1.3.6.1.4.1.224.2.3.8.2 integer read-write
Sets the Link number. Value = 0-3.
                     snSysCMOSBRDGpassword 1.3.6.1.4.1.224.2.3.8.3 displaystring read-write
Sets the bridge password. 8 characters .