KST-2000AB: View SNMP OID List / Download MIB

VENDOR: COMTECH EFDATA CORPORATION


 Home MIB: KST-2000AB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, ComtechEFData

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 kst2000AB 1.3.6.1.4.1.6247.30
Module Identity for KST-2000A/B Transceiver.
       kst2000ABObjects 1.3.6.1.4.1.6247.30.1
           kstSystemInfo 1.3.6.1.4.1.6247.30.1.1
               kstEquipmentType 1.3.6.1.4.1.6247.30.1.1.1 octet string read-only
KST Equipment Type. (RET?)
               kstSerialNumbers 1.3.6.1.4.1.6247.30.1.1.2 octet string read-only
KST-2000A/B Serial Numbers. (SNM?)
               kstAssemblyNumbers 1.3.6.1.4.1.6247.30.1.1.3 octet string read-only
KST-2000A/B Assembly Numbers. (ANM?)
               kstFirmwareNumbers 1.3.6.1.4.1.6247.30.1.1.4 octet string read-only
KST-2000A/B Firmware Numbers and Versions. (FRM?)
           kstUnitParameters 1.3.6.1.4.1.6247.30.1.2
               kstCircuitID 1.3.6.1.4.1.6247.30.1.2.1 octet string read-write
KST-2000A/B Unit Circuit ID. (CID?, CID=)
               kstAgc 1.3.6.1.4.1.6247.30.1.2.2 integer read-write
KST-2000A/B Unit AGC. (AGC?, AGC=) Enumeration: 'on': 1, 'off': 0, 'burst': 2.
               kstRefOscillatorAdjust 1.3.6.1.4.1.6247.30.1.2.3 integer read-write
KST-2000A/B Reference Oscillator Adjust. (REF?, REF=)
               kstLockMode 1.3.6.1.4.1.6247.30.1.2.4 integer read-write
KST-2000A/B Lock Mode. (LOK?, LOK=) Enumeration: 'on': 1, 'off': 0.
           kstTxParameters 1.3.6.1.4.1.6247.30.1.3
               kstUpConvFrequency 1.3.6.1.4.1.6247.30.1.3.1 integer read-write
KST-2000A/B Up Converter Frequency. (UFQ?, UFQ=)
               kstUpConvAttenuation 1.3.6.1.4.1.6247.30.1.3.2 integer read-write
KST-2000A/B Up Converter Attenuation. (UAT?, UAT=)
               kstUpConvOutput 1.3.6.1.4.1.6247.30.1.3.3 integer read-write
KST-2000A/B Up Converter Output. (UMU?, UMU=) Enumeration: 'on': 1, 'warm': 2, 'off': 0.
               kstHpaPowerEnable 1.3.6.1.4.1.6247.30.1.3.4 integer read-write
KST-2000A/B HPA Power Enable. (AMP?, AMP=) Enumeration: 'on': 1, 'off': 0.
               kstHpaFaultLogic 1.3.6.1.4.1.6247.30.1.3.5 integer read-write
KST-2000A/B HPA Fault Logic. (KFE?, KFE=) Enumeration: 'noSummary': 0, 'summary': 1.
           kstRxParameters 1.3.6.1.4.1.6247.30.1.4
               kstDownConvFrequency 1.3.6.1.4.1.6247.30.1.4.1 integer read-write
KST-2000A/B Down Converter Frequency. (DFQ?, DFQ=)
               kstDownConvAttenuation 1.3.6.1.4.1.6247.30.1.4.2 integer read-write
KST-2000A/B Down Converter Attenuation. (DAT?, DAT=)
               kstReceiveBand 1.3.6.1.4.1.6247.30.1.4.3 integer read-write
KST-2000B Receive Band. (SRB?, SRB=) SRB=x, where x is, A = band 10950 to 11700 MHz B = band 11700 to 12200 MHz C = band 12250 to 12750 MHz Enumeration: 'bandB': 1, 'bandC': 2, 'bandA': 0.
               kstLnaPowerEnable 1.3.6.1.4.1.6247.30.1.4.4 integer read-write
KST-2000A/B LNA Power Enable. (LCS?, LCS=) Enumeration: 'on': 1, 'off': 0.
               kstLnaFaultLogic 1.3.6.1.4.1.6247.30.1.4.5 integer read-write
KST-2000A/B LNA Fault Logic. (LFL?, LFL=) Enumeration: 'noSummary': 0, 'summary': 1.
           kstUnitStatus 1.3.6.1.4.1.6247.30.1.5
               kstUnitFaultStatus 1.3.6.1.4.1.6247.30.1.5.1 octet string read-only
KST-2000A/B Unit Fault Status. (CFS?, CFS=) CFS=ABCDEFG, where A = Common Equipment Status, 0=OK, 1=FLT B = Reference Status, 0=OK, 1=FLT C = AGC Status, 0=OK, 1=FLT D = Up Converter Status, 0=OK, 1=FLT E = Down Converter Status, 0=OK, 1=FLT F = HPA Status, 0=OK, 1=FLT G = LNA Status, 0=OK, 1=FLT
               kstCommonEquipmentStatus 1.3.6.1.4.1.6247.30.1.5.2 octet string read-only
KST-2000A/B Common Equipment Status. (CES?, CES=) CES=ABCD, where A = -7V PS Status, 0=OK, 1=FLT B = +7V PS Status, 0=OK, 1=FLT C = +12V PS Status, 0=OK, 1=FLT D = +17V PS Status, 0=OK, 1=FLT
               kstReferenceStatus 1.3.6.1.4.1.6247.30.1.5.3 octet string read-only
KST-2000A/B Reference Status. (CRS?, CRS=) CRS=ABCDEF, where A = REF Source, 0=INT, 1=EXT B = Oscillator State, 0=COLD, 1=WARM C = 72M Lock Status, 0=OK, 1=FLT D = EXT REF Lock Status, 0=OK, 1=FLT, 2=NA E = EXT REF Phase_N Status, 0=OK, 1=FLT, 2=NA F = EXT REF Range Status, 0=OK, 1=FLT, 2=NA
               kstAgcStatus 1.3.6.1.4.1.6247.30.1.5.4 octet string read-only
KST-2000A/B AGC Status. (CAS?, CAS=) CAS=ABC, where A = Loop Convergence, 0=OK, 1=FLT B = Excessive Input Power (EIP), 0=OK, 1=FLT C = Insufficient Input Power (IIP), 0=OK, 1=FLT
               kstUpConvStatus 1.3.6.1.4.1.6247.30.1.5.5 octet string read-only
KST-2000A/B Up Converter Status. (CUS?, CUS=) CUS=ABCD, where A = Overtemperature Status, 0=OK, 1=FLT B = L-Band Synthesizer Lock Status, 0=OK, 1=FLT C = Ku-Band Synthesizer Lock Status, 0=OK, 1=FLT D = Interprocessor Comm. Status, 0=OK, 1=FLT
               kstDownConvStatus 1.3.6.1.4.1.6247.30.1.5.6 octet string read-only
KST-2000A/B Down Converter Status. (CDS?, CDS=) CDS=ABCD, where A = Overtemperature Status, 0=OK, 1=FLT B = L-Band Synthesizer Lock Status, 0=OK, 1=FLT C = Ku-Band Synthesizer Lock Status, 0=OK, 1=FLT D = Interprocessor Comm. Status, 0=OK, 1=FLT
               kstHpaStatus 1.3.6.1.4.1.6247.30.1.5.7 octet string read-only
KST-2000A/B HPA Status. (CHS?, CHS=) CHS=ABCDE, where A = Overtemperature Status, 0=OK, 1=FLT, 2=NA B = +9.5V Status, 0=OK, 1=FLT, 2=NA C = -5V Status, 0=OK, 1=FLT, 2=NA D = BIAS Voltage Summary Status, 0=OK, 1=FLT, 2=NA E = Interprocessor Comm. Status, 0=OK, 1=FLT, 2=NA
               kstLnaStatus 1.3.6.1.4.1.6247.30.1.5.8 octet string read-only
KST-2000A/B LNA Status. 0=OK, 1=FLT
       kst2000ABConformance 1.3.6.1.4.1.6247.30.2
           kst2000ABGroups 1.3.6.1.4.1.6247.30.2.1
               kst2000ABObjectsGroup 1.3.6.1.4.1.6247.30.2.1.1
KST-2000A/B Objects Group.
           kst2000ABCompliances 1.3.6.1.4.1.6247.30.2.2
               kst2000ABCompliance 1.3.6.1.4.1.6247.30.2.2.1
KST-2000A/B Compliance.