Juniper-V35-MIB: View SNMP OID List / Download MIB

VENDOR: JUNIPER


 Home MIB: Juniper-V35-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, Juniper-MIBs, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 juniV35MIB 1.3.6.1.4.1.4874.2.2.59
The X.21/V.35 Server MIB for the Juniper Networks enterprise.
       juniV35Objects 1.3.6.1.4.1.4874.2.2.59.1
           juniV35IfTable 1.3.6.1.4.1.4874.2.2.59.1.2 no-access
This table contains entries for X.21/V.35 interfaces present in the system. This table provides an extension to the Juniper-HDLC-MIB.juniHdlcIfTable for HDLC interfaces that support X.21/V.35 signalling.
               juniV35IfEntry 1.3.6.1.4.1.4874.2.2.59.1.2.1 no-access
Each entry describes the characteristics of an X.21/V.35 interface.
                   juniV35IfIndex 1.3.6.1.4.1.4874.2.2.59.1.2.1.1 interfaceindex no-access
The ifIndex of the X.21/V.35 interface. It has the same value as the juniHdlcIfIndex for the common interface.
                   juniV35IfType 1.3.6.1.4.1.4874.2.2.59.1.2.1.2 integer read-only
Read only parameter of interface type X.21/V.35. Enumeration: 'x21': 0, 'v35': 1, 'interfaceTypeNoCable': 2.
                   juniV35IfMode 1.3.6.1.4.1.4874.2.2.59.1.2.1.3 integer read-only
Read only parameter of interface mode of interface X.21/V.35 Data Terminating Equipment(DTE)/Data Communication Equipment(DCE). Enumeration: 'dce': 1, 'interfaceModeNoCable': 2, 'dte': 0.
                   juniV35IfClockRate 1.3.6.1.4.1.4874.2.2.59.1.2.1.4 unsigned32 read-write
The clock rate setting in hertz for this X.21/V.35 interface. Only the following values are valid: 1200, 2400, 4800, 9600, 19200, 38400, 56000, 64000, 128000, 1024000, 1536000, 2048000, 3072000, 4096000, 4915200, 6144000, and 8192000. If a value other than one of the predefined values is set, then the closest matching value is used. The clock rate parameter is only meaningful when the interface is in DCE mode. When the interface is in DTE mode, the value is simply ignored.
                   juniV35IfNrzEncoding 1.3.6.1.4.1.4874.2.2.59.1.2.1.5 integer read-write
The non-return-to-zero (NRZ) encoding for X.21/V.35 interface. Inverted encoding is provided with NRZI-encoding command, which is non-return-to-zero inverted (NRZI) encoding. Enumeration: 'inverted': 1, 'normal': 0.
                   juniV35IfTxClock 1.3.6.1.4.1.4874.2.2.59.1.2.1.6 integer read-write
There is an option of inverting the transmit clock signal for X.21/V.35 interface. Inverting the tranmit clock is used to compensate for skews between the clock and data when transmitting across long cables at fast data rates. Enumeration: 'inverted': 1, 'normal': 0.
                   juniV35IfIgnoreDcd 1.3.6.1.4.1.4874.2.2.59.1.2.1.7 integer read-write
When in X.21/V.35 DTE mode we have the capability of ignoring the DCD signal in determining whether or not an interface is up. Enumeration: 'ignoredNone': 0, 'linkStateIgnored': 2, 'dcdIgnored': 1.
                   juniV35IfLoopback 1.3.6.1.4.1.4874.2.2.59.1.2.1.8 integer read-write
Loopback interface is configured (or not) for X.21/V.35 interface Enumeration: 'none': 0, 'loopback': 1.
       juniV35Conformance 1.3.6.1.4.1.4874.2.2.59.4
           juniV35Compliances 1.3.6.1.4.1.4874.2.2.59.4.1
               juniV35Compliance 1.3.6.1.4.1.4874.2.2.59.4.1.1
The compliance statement for entities that implement the Juniper X.21/V.35 MIB.
           juniV35Groups 1.3.6.1.4.1.4874.2.2.59.4.2
               juniV35Group 1.3.6.1.4.1.4874.2.2.59.4.2.1
A collection of objects providing management of X.21/V.35 interfaces in a Juniper product.