Juniper-ISIS-MIB: View SNMP OID List / Download MIB

VENDOR: JUNIPER


 Home MIB: Juniper-ISIS-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, Juniper-MIBs, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 juniIsisMIB 1.3.6.1.4.1.4874.2.2.38
The intermediate system to intermediate system (IS-IS) routing protocol MIB for Juniper Networks E-series products. This MIB provides objects for management of the IS-IS Routing protocol, as described in ISO 10589, when it is used to construct routing tables for IP networks, as described in RFC 1195.
       juniIsisObjects 1.3.6.1.4.1.4874.2.2.38.1
           juniIsisSystemGroup 1.3.6.1.4.1.4874.2.2.38.1.1
               juniIsisSysTable 1.3.6.1.4.1.4874.2.2.38.1.1.1 no-access
The set of instances of the Integrated IS-IS protocol existing on the system.
                   juniIsisSysEntry 1.3.6.1.4.1.4874.2.2.38.1.1.1.1 no-access
Each row defines information specific to a single instance of the protocol existing on the system.
                       juniIsisSysInstance 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.1 integer32 no-access
The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.
                       juniIsisSysVersion 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.2 displaystring read-only
The version number of the IS-IS protocol to which this instance conforms. This value must be set by the implementation when the row is valid.
                       juniIsisSysType 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.3 integer read-write
The type of this instance of the Integrated IS-IS protocol. This object follows the replaceOnlyWhileDisabled behaviour. Enumeration: 'level2Only': 3, 'level1l2IS': 2, 'level1IS': 1.
                       juniIsisSysID 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.4 systemid read-write
The ID for this instance of the Integrated IS-IS protocol. This value is appended to each of the instance's area addresses to form the Network Entity Titles valid for this instance. The derivation of a value for this object is implementation-specific. Some implementations may assign values and not permit write MAX-ACCESS, others may require the value to be set manually.
                       juniIsisSysMaxPathSplits 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.5 integer32 read-write
Maximum number of paths with equal routing metric value which it is permitted to split between. This object follows the replaceOnlyWhileDisabled behaviour.
                       juniIsisSysMaxLSPGenInt 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.6 integer32 read-write
Maximum interval, in seconds, between generated LSPs by this instance. This object follows the resettingTimer behaviour.
                       juniIsisSysOrigLSPBuffSize 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.7 lspbuffsize read-write
The maximum size of LSPs and SNPs originated by this instance. This object follows the replaceOnlyWhileDisabled behaviour.
                       juniIsisSysMaxAreaAddresses 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.8 integer32 read-only
The maximum number of area addresses to be permitted for the area in which this instance exists. Note that all Intermediate Systems in the same area must have the same value configured for this attribute if correct operation is to be assumed. This object follows the replaceOnlyWhileDisabled behaviour.
                       juniIsisSysMinL1LSPGenInt 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.9 integer32 read-write
Minimum interval, in seconds, between successive generation of L1 LSPs with the same LSPID by this instance. This object follows the resettingTimer behaviour.
                       juniIsisSysMinL2LSPGenInt 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.10 integer32 read-write
Minimum interval, in seconds, between successive generation of L2 LSPs with the same LSPID by this instance. This object follows the resettingTimer behaviour.
                       juniIsisSysPollESHelloRate 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.11 integer32 read-only
The value, in seconds, to be used for the suggested ES configuration timer in ISH PDUs when soliciting the ES configuration.
                       juniIsisSysWaitTime 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.12 integer32 read-only
Number of seconds to delay in waiting state before entering on state. This object follows the resettingTimer behaviour.
                       juniIsisSysOperState 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.13 operstate read-write
The operational state of this instance of the Integrated IS-IS protocol. Setting this object to the value on when its current value is off enables operation of this instance of the Integrated IS-IS protocol.
                       juniIsisSysL1State 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.14 levelstate read-only
The state of the Level 1 database.
                       juniIsisSysCorrLSPs 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.15 counter32 read-only
Number of corrupted LSPs detected.
                       juniIsisSysLSPL1DbaseOloads 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.16 counter32 read-only
Number of times the LSP L1 database has become overloaded.
                       juniIsisSysManAddrDropFromAreas 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.17 counter32 read-only
Number of times a manual address has been dropped from the area.
                       juniIsisSysAttmptToExMaxSeqNums 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.18 counter32 read-only
Number of times the IS has attempted to exceed the maximum sequence number.
                       juniIsisSysSeqNumSkips 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.19 counter32 read-only
Number of times a sequence number skip has occurred.
                       juniIsisSysOwnLSPPurges 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.20 counter32 read-only
Number of times a zero-aged copy of the system's own LSP is received from some other node.
                       juniIsisSysIDFieldLenMismatches 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.21 counter32 read-only
Number of times a PDU is received with a different value for ID field length to that of the receiving system.
                       juniIsisSysMaxAreaAddrMismatches 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.22 counter32 read-only
Number of times a PDU is received with a different value for MaximumAreaAddresses from that of the receiving system.
                       juniIsisSysOrigL2LSPBuffSize 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.23 lspbuffsize read-write
The maximum size of Level 2 LSPs and SNPs originated by this system. This object follows the replaceOnlyWhileDisabled behaviour.
                       juniIsisSysL2State 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.24 levelstate read-only
The state of the Level 2 database.
                       juniIsisSysLSPL2DbaseOloads 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.25 counter32 read-only
Number of times the Level 2 LSP database has become overloaded.
                       juniIsisSysAuthFails 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.26 counter32 read-only
The number of authentication failures recognized by this instance of the protocol.
                       juniIsisSysLSPIgnoreErrors 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.27 truthvalue read-write
If true, allow the router to ignore IS-IS link state packets (LSPs) that are received with internal checksum errors rather than purging the LSPs.
                       juniIsisSysMaxAreaCheck 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.28 truthvalue read-only
When on, enables checking of maximum area addresses per IS version of ISO10589.
                       juniIsisSysSetOverloadBit 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.29 truthvalue read-write
Isis overload bit
                       juniIsisSysSetOverloadBitStartupDuration 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.30 integer32 read-write
Specifies the length in time of seconds to set the overload bit from startup. This object must be set together with juniIsisSysSetOverloadBit, otherwise the agent will return zero. Zero value for this object implies that the overload bit is not set. Zero value does not have any meaning for this object.
                       juniIsisSysMaxLspLifetime 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.31 integer32 read-write
Specifies the maximum time (in seconds) a LSP will remain in the box without being refreshed before being considered invalid.
                       juniIsisSysL1SpfInterval 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.32 integer32 read-write
Minimum interval, in seconds, between level 1 SPF calculations.
                       juniIsisSysL2SpfInterval 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.33 integer32 read-write
Minimum interval, in seconds, between level 2 SPF calculations.
                       juniIsisSysIshHoldTime 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.34 integer32 read-write
Specify a holdtime advertised in ESH/ISH PDUs.
                       juniIsisSysIshConfigTimer 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.35 integer32 read-write
Specify the rate of transmission for ESH and ISH packets.
                       juniIsisSysDistributeDomainWide 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.36 truthvalue read-write
When on, enables distribution of prefixes throughout a multi-level domain.
                       juniIsisSysDistance 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.37 integer32 read-write
The weight applied to IS-IS routes.
                       juniIsisSysL1MetricStyle 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.38 integer read-write
Specifies the type of IP reachability TLV to advertise in level 1 LSPs. Enumeration: 'juniIsisMetricStyleNarrowTransition': 3, 'juniIsisMetricStyleWide': 5, 'juniIsisMetricStyleWideTransition': 6, 'juniIsisMetricStyleTransition': 4, 'juniIsisMetricStyleNarrow': 2.
                       juniIsisSysL2MetricStyle 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.39 integer read-write
Specifies the type of IP reachability TLV to advertise in level 2 LSPs. Enumeration: 'juniIsisMetricStyleNarrowTransition': 3, 'juniIsisMetricStyleWide': 5, 'juniIsisMetricStyleWideTransition': 6, 'juniIsisMetricStyleTransition': 4, 'juniIsisMetricStyleNarrow': 2.
                       juniIsisSysIsoRouteTag 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.40 octet string read-write
The ISO routing area tag.
                       juniIsisSysMplsTeLevel 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.41 integer read-write
Select flooding of MPLS traffic engineering link information into the specified ISIS level. Enumeration: 'level1': 1, 'level2': 2, 'levelNone': 0.
                       juniIsisSysMplsTeRtrIdIfIndex 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.42 interfaceindexorzero read-write
Configure the stable router interface ID to designate it as TE capable. A value of zero is used to remove any configured router interface ID.
                       juniIsisSysMplsTeSpfUseAnyBestPath 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.43 truthvalue read-write
Configure whether or not to consider spf paths when alternate tunnel path exists
                       juniIsisSysReferenceBandwidth 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.44 gauge32 read-write
Configure the reference bandwitdth used to calculate the link cost in bits per second.If the reference bandwidth is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295) and juniIsisSysHighReferenceBandwidth must be used to report the reference bandwidth.
                       juniIsisSysHighReferenceBandwidth 1.3.6.1.4.1.4874.2.2.38.1.1.1.1.45 gauge32 read-write
Configure the reference bandwitdth in mega bits per second. It is used to calculate the link cost.
               juniIsisManAreaAddrTable 1.3.6.1.4.1.4874.2.2.38.1.1.2 no-access
The set of manual area addresses configured on this Intermediate System.
                   juniIsisManAreaAddrEntry 1.3.6.1.4.1.4874.2.2.38.1.1.2.1 no-access
Each entry contains one area address manually configured on this system.
                       juniIsisManAreaAddrSysInstance 1.3.6.1.4.1.4874.2.2.38.1.1.2.1.1 integer32 no-access
The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.
                       juniIsisManAreaAddr 1.3.6.1.4.1.4874.2.2.38.1.1.2.1.2 osinsaddress no-access
A manually configured area address for this system. This object follows the index behaviour. Note: an index for the entry {1, {49.0001} active} in this table would be the ordered pair (1, (0x03 0x49 0x00 0x01)), as the length of an octet string is part of the OID.
                       juniIsisManAreaAddrRowStatus 1.3.6.1.4.1.4874.2.2.38.1.1.2.1.3 rowstatus read-only
The state of the juniIsisManAreaAddrEntry. This object follows the RowStatus behaviour. If an attempt is made to set this object to the value off when the corresponding juniIsisManAreaAddrEntry is the only valid entry for this instance and when the corresponding IS-IS instance has juniIsisSysOperState set to on then the attempt is rejected.
               juniIsisSysProtSuppTable 1.3.6.1.4.1.4874.2.2.38.1.1.3 no-access
This table contains the manually configured set of protocols supported by each instance of the Integrated ISIS protocol.
                   juniIsisSysProtSuppEntry 1.3.6.1.4.1.4874.2.2.38.1.1.3.1 no-access
Each entry contains one protocol supported by an instance of the Integrated ISIS protocol.
                       juniIsisSysProtSuppSysInstance 1.3.6.1.4.1.4874.2.2.38.1.1.3.1.1 integer32 no-access
The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.
                       juniIsisSysProtSuppProtocol 1.3.6.1.4.1.4874.2.2.38.1.1.3.1.2 supportedprotocol no-access
One supported protocol. This object follows the index behaviour.
                       juniIsisSysProtSuppRowStatus 1.3.6.1.4.1.4874.2.2.38.1.1.3.1.3 rowstatus read-only
The state of the juniIsisSysProtSuppEntry. This object follows the RowStatus behavior.
               juniIsisSummAddrTable 1.3.6.1.4.1.4874.2.2.38.1.1.4 no-access
The set of IP summary addresses to use in forming the contents of Level 2 LSPs originated by this level 2 Intermediate System.
                   juniIsisSummAddrEntry 1.3.6.1.4.1.4874.2.2.38.1.1.4.1 no-access
Each entry contains one IP summary address.
                       juniIsisSummAddrSysInstance 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.1 integer32 no-access
The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviours.
                       juniIsisSummAddress 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.2 ipaddress no-access
The IP Address value for this summary address. This object follows the index behaviour.
                       juniIsisSummAddrMask 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.3 ipaddress no-access
The mask value for this summary address. This object follows the index behaviour.
                       juniIsisSummAddrRowStatus 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.4 rowstatus read-only
The existence state of this summary address. This object follows the RowStatus behaviour.
                       juniIsisSummAddrOperState 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.5 operstate read-only
The operational state of this entry. This object follows the operationalState behaviour. When the operational state changes if this would cause the contents of LSPs originated by the system to change then those new LSPs must be generated and sent as soon as is permitted by the ISIS protocol.
                       juniIsisSummAddrDefaultMetric 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.6 integer32 read-only
The default metric value to announce this summary address with in Level 1 or 2 LSPs generated by this system. A Metric value of 0 indicates to use the lowest metric value amongst the routes being summarized. When advertising a metric value into a narrow domain (juniIsisSysL1MetricStyle or juniIsisSysL2MetricStyle is set to juniIsisMetricStyleNarrow) the value will be truncated to 63.
                       juniIsisSummAddrDelayMetric 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.7 othermetric read-only
The delay metric value to announce this summary address with in Level 2 LSPs generated by this system. The value of zero is reserved to indicate that this metric is not supported.
                       juniIsisSummAddrExpenseMetric 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.8 othermetric read-only
The expense metric value to announce this summary address with in Level 2 LSPs generated by this system. The value of zero is reserved to indicate that this metric is not supported.
                       juniIsisSummAddrErrorMetric 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.9 othermetric read-only
The error metric value to announce this summary address with in Level n LSPs generated by this system. The value of zero is reserved to indicate that this metric is not supported.
                       juniIsisSummLevel 1.3.6.1.4.1.4874.2.2.38.1.1.4.1.10 integer read-only
The level of database at which to annouce this summary. Enumeration: 'level1l2IS': 3, 'level2IS': 2, 'level1IS': 1.
               juniIsisSysHostNameTable 1.3.6.1.4.1.4874.2.2.38.1.1.5 no-access
This table contains the manually configured set of host name to system ID aliases supported by each instance of the Integrated ISIS protocol.
                   juniIsisSysHostNameEntry 1.3.6.1.4.1.4874.2.2.38.1.1.5.1 no-access
Each entry contains one name to system ID alias supported by an instance of the Integrated ISIS protocol.
                       juniIsisSysHostNameSysInstance 1.3.6.1.4.1.4874.2.2.38.1.1.5.1.1 integer32 no-access
The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.
                       juniIsisSysHostNameSysId 1.3.6.1.4.1.4874.2.2.38.1.1.5.1.2 systemid no-access
The ID for the system which this name will be assigned.
                       juniIsisSysHostNameAreaAddr 1.3.6.1.4.1.4874.2.2.38.1.1.5.1.3 osinsaddress read-only
A configured area address for the system which this name will be assigned. This object follows the index behaviour. Note: an index for the entry {1, {49.0001} active} in this table would be the ordered pair (1, (0x03 0x49 0x00 0x01)), as the length of an Octet string is part of the OID.
                       juniIsisSysHostNameName 1.3.6.1.4.1.4874.2.2.38.1.1.5.1.4 octet string read-write
A string to use when displaying system data with this system ID.
                       juniIsisSysHostNameType 1.3.6.1.4.1.4874.2.2.38.1.1.5.1.5 integer read-only
The type of host name entry. Enumeration: 'hostNameTypeDynamic': 2, 'hostNameTypeStatic': 1.
                       juniIsisSysHostNameRowStatus 1.3.6.1.4.1.4874.2.2.38.1.1.5.1.6 rowstatus read-write
The status of this host name entry. This object follows the RowStatus behaviour.
               juniIsisSysAreaAuthenticationTable 1.3.6.1.4.1.4874.2.2.38.1.1.6 no-access
This table contains the manually configured set of area authentication keys supported by each instance of the Integrated ISIS protocol.
                   juniIsisSysAreaAuthenticationEntry 1.3.6.1.4.1.4874.2.2.38.1.1.6.1 no-access
Each entry contains one area authentication key supported by an instance of the Integrated ISIS protocol.
                       juniIsisSysAreaAuthenticationSysInstance 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.1 integer32 no-access
The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.
                       juniIsisSysAreaAuthenticationKeyId 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.2 integer32 no-access
The unique identifier of the instance to which this row corresponds. This object follows the index behaviour.
                       juniIsisSysAreaAuthenticationPwd 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.3 octet string read-write
The value to be used as the Authentication Key in Level 1 Link State Packets whenever the value of juniIsisSysAreaAuthenticationKeyType has a value of plaintext or hmacMd5. A modification of juniIsisSysAreaAuthenticationKeyType does not modify the juniIsisSysAreaAuthenticationPwd value. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.
                       juniIsisSysAreaAuthenticationKeyType 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.4 integer read-write
What authentication scheme, if any, is used to protect Level 1 Link State packets and sequence number packets Enumeration: 'plaintext': 1, 'hmacMd5': 2, 'none': 0.
                       juniIsisSysAreaAuthenticationStartAcceptTime 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.5 authtime read-write
The date and time when this authentication key will start to be used to validate level 1 LSPs and SNPs received. The Default value the start accept time will be the current time when the key was created
                       juniIsisSysAreaAuthenticationStartGenerateTime 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.6 authtime read-write
The date and time when this authentication key will start to be used to authenticate level 1 LSPs and SNPs transmitted. The Default value the start accept time will be the current time when the key was created + 2 minutes
                       juniIsisSysAreaAuthenticationStopAcceptTime 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.7 authtime read-write
The date and time when this authentication key will stop being accepted as a valid level 1 LSP and SNP key received. A value of zero indicates the key will never stop being used to authenticate packets.
                       juniIsisSysAreaAuthenticationStopGenerateTime 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.8 authtime read-write
The date and time when this authentication key will stop being used to authenticate level 1 LSPs and SNPs transmitted. A value of zero indicates the key will never stop being used to authenticate packets.
                       juniIsisSysAreaAuthenticationRowStatus 1.3.6.1.4.1.4874.2.2.38.1.1.6.1.9 rowstatus read-write
The existence state of this authentication key. This object follows the RowStatus behaviour.
               juniIsisSysDomainAuthenticationTable 1.3.6.1.4.1.4874.2.2.38.1.1.7 no-access
This table contains the manually configured set of domain authentication keys supported by each instance of the Integrated ISIS protocol.
                   juniIsisSysDomainAuthenticationEntry 1.3.6.1.4.1.4874.2.2.38.1.1.7.1 no-access
Each entry contains one domain authentication key supported by an instance of the Integrated ISIS protocol.
                       juniIsisSysDomainAuthenticationSysInstance 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.1 integer32 no-access
The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.
                       juniIsisSysDomainAuthenticationKeyId 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.2 integer32 no-access
The unique identifier of the instance to which this row corresponds. This object follows the index behaviour.
                       juniIsisSysDomainAuthenticationPwd 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.3 octet string read-write
The value to be used as the Authentication Key in Level 2 Link State Packets whenever the value of juniIsisSysDomainAuthenticationKeyType has a value of plaintext or hmacMd5. A modification of juniIsisSysDomainAuthenticationKeyType does not modify the juniIsisSysDomainAuthenticationPwd value. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.
                       juniIsisSysDomainAuthenticationKeyType 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.4 integer read-write
What authentication scheme, if any, is used to protect Level 2 Link State packets and Sequence Number packets Enumeration: 'plaintext': 1, 'hmacMd5': 2, 'none': 0.
                       juniIsisSysDomainAuthenticationStartAcceptTime 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.5 authtime read-write
The date and time when this authentication key will start to be used to validate level 2 LSPs and SNPs received. The Default value the start accept time will be the current time when the key was created
                       juniIsisSysDomainAuthenticationStartGenerateTime 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.6 authtime read-write
The date and time when this authentication key will start to be used to authenticate level 2 LSPs and SNPs transmitted. The Default value the start accept time will be the current time when the key was created + 2 minutes
                       juniIsisSysDomainAuthenticationStopAcceptTime 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.7 authtime read-write
The date and time when this authentication key will stop being accepted as a valid level 2 LSP and SNP key received. A value of zero indicates the key will never stop being used to authenticate packets.
                       juniIsisSysDomainAuthenticationStopGenerateTime 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.8 authtime read-write
The date and time when this authentication key will stop being used to authenticate level 2 LSPs and SNPs transmitted. A value of zero indicates the key will never stop being used to authenticate packets.
                       juniIsisSysDomainAuthenticationRowStatus 1.3.6.1.4.1.4874.2.2.38.1.1.7.1.9 rowstatus read-write
The existence state of this authentication key. This object follows the RowStatus behaviour.
               juniIsisMplsTeTunnelTable 1.3.6.1.4.1.4874.2.2.38.1.1.8 no-access
The set of tunnels imported from MPLS.
                   juniIsisMplsTeTunnelEntry 1.3.6.1.4.1.4874.2.2.38.1.1.8.1 no-access
Each entry contains metric details of an MPLS LSP
                       juniIsisMplsTeTunnelSysInstance 1.3.6.1.4.1.4874.2.2.38.1.1.8.1.1 integer32 no-access
The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.
                       juniIsisMplsNextHopIndex 1.3.6.1.4.1.4874.2.2.38.1.1.8.1.2 integer32 no-access
An index to uniquely identify the tunnels.
                       juniIsisMplsTeSystemId 1.3.6.1.4.1.4874.2.2.38.1.1.8.1.3 systemid read-only
The ID for the instance of the Integrated IS-IS protocol running in the tunnel's end point.
                       juniIsisMplsTeRouterId 1.3.6.1.4.1.4874.2.2.38.1.1.8.1.4 ipaddress read-only
The router ID of the tunnel's end point.
                       juniIsisMplsTeTunnelMetric 1.3.6.1.4.1.4874.2.2.38.1.1.8.1.5 integer32 read-only
The metric associated with the tunnel.
                       juniIsisMplsTeTunnelRelMetric 1.3.6.1.4.1.4874.2.2.38.1.1.8.1.6 integer32 read-only
The metric associated with the tunnel relative to the spf path.
                       juniIsisMplsTeTunnelName 1.3.6.1.4.1.4874.2.2.38.1.1.8.1.7 octet string read-only
The name associated with the tunnel.
           juniIsisCircuitGroup 1.3.6.1.4.1.4874.2.2.38.1.2
               juniIsisCircTable 1.3.6.1.4.1.4874.2.2.38.1.2.1 no-access
The table of circuits used by each instance of Integrated IS-IS on this system.
                   juniIsisCircEntry 1.3.6.1.4.1.4874.2.2.38.1.2.1.1 no-access
An juniIsisCircEntry exists for each circuit used by Integrated IS-IS on this system.
                       juniIsisCircSysInstance 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.1 integer32 no-access
The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.
                       juniIsisCircIfIndex 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.2 integer32 no-access
The value of ifIndex for the interface to which this circuit corresponds.
                       juniIsisCircLocalID 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.3 integer32 read-only
An identification that can be used in protocol packets to identify a circuit. Implementations may devise ways to assure that this value is suitable for the circuit it is used on. LAN packets only have space for 8 bits. Values of juniIsisCircLocalID do not need to be unique. They are only required to differ on LANs where the Intermediate System is the Designated Intermediate System.
                       juniIsisCircOperState 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.4 operstate read-write
The operational state of the circuit. This object follows the operationalState behaviour.
                       juniIsisCircRowStatus 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.5 rowstatus read-write
The existence state of this circuit. This object follows the RowStatus behaviour.
                       juniIsisCircType 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.6 integer read-only
The type of the circuit. This object follows the replaceOnlyWhileDisabled behaviour. The type specified must be compatible with the type of the interface defined by the value of juniIsisCircIfIndex. Enumeration: 'broadcast': 1, 'ptToPt': 2.
                       juniIsisCircL1DefaultMetric 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.7 junidefaultmetric read-write
The default metric value of this circuit for Level 1 traffic.
                       juniIsisCircL1DelayMetric 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.8 othermetric read-only
The delay metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported.
                       juniIsisCircL1ExpenseMetric 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.9 othermetric read-only
The expense metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported.
                       juniIsisCircL1ErrorMetric 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.10 othermetric read-only
The error metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported.
                       juniIsisCircExtDomain 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.11 truthvalue read-only
If true, suppress normal transmission of and interpretation of Intra-domain ISIS PDUs on this circuit.
                       juniIsisCircAdjChanges 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.12 counter32 read-only
The number of times an adjacency state change has occurred on this circuit.
                       juniIsisCircInitFails 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.13 counter32 read-only
The number of times initialization of this circuit has failed.
                       juniIsisCircRejAdjs 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.14 counter32 read-only
The number of times an adjacency has been rejected on this circuit.
                       juniIsisCircOutCtrlPDUs 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.15 counter32 read-only
The number of IS-IS control PDUs sent on this circuit.
                       juniIsisCircInCtrlPDUs 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.16 counter32 read-only
The number of IS-IS control PDUs received on this circuit.
                       juniIsisCircIDFieldLenMismatches 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.17 counter32 read-only
The number of times an IS-IS control PDU with an ID field length different to that for this system has been received.
                       juniIsisCircL2DefaultMetric 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.18 junidefaultmetric read-write
The default metric value of this circuit for level 2 traffic.
                       juniIsisCircL2DelayMetric 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.19 othermetric read-only
The delay metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported.
                       juniIsisCircL2ExpenseMetric 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.20 othermetric read-only
The expense metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported.
                       juniIsisCircL2ErrorMetric 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.21 othermetric read-only
The error metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported.
                       juniIsisCircManL2Only 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.22 truthvalue read-only
When true, indicates that this circuit is to be used only for level 2. This object follows the replaceOnlyWhileDisabled behaviour.
                       juniIsisCircL1ISPriority 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.23 ispriority read-write
The priority for becoming LAN Level 1 Deignated Intermediate System on a broadcast circuit.
                       juniIsisCircL1CircID 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.24 circuitid read-only
The LAN ID allocated by the LAN Level 1 Designated Intermediate System. Where this system is not aware of the value (because it is not participating in the Level 1 Designated Intermediate System election), this object has the value which would be proposed for this circuit (i.e. the concatenation of the local system ID and the one octet local Circuit ID for this circuit.
                       juniIsisCircL1DesIS 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.25 systemid read-only
The ID of the LAN Level 1 Designated Intermediate System on this circuit. If, for any reason this system is not partaking in the relevant Designated Intermediate System election process, then the value returned is the zero length OCTET STRING.
                       juniIsisCircLANL1DesISChanges 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.26 counter32 read-only
The number of times the LAN Level 1 Designated Intermediate System has changed.
                       juniIsisCircL2ISPriority 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.27 ispriority read-write
The priority for becoming LAN level 2 Designated Intermediate System.
                       juniIsisCircL2CircID 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.28 circuitid read-only
The LAN ID allocated by the LAN Level 2 Designated Intermediate System. Where this system is not aware of this value (because it is not participating in the Level 2 Designated Intermediate System election), this object has the value which would be proposed for this circuit (i.e. the concatenation of the local system ID and the one octet local Circuit ID for this circuit.
                       juniIsisCircL2DesIS 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.29 systemid read-only
The ID of the LAN Level 2 Designated Intermediate System on this circuit. If, for any reason, this system is not partaking in the relevant Designated Intermediate System election process, then the value returned is the zero length OCTET STRING.
                       juniIsisCircLANL2DesISChanges 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.30 counter32 read-only
The number of times the LAN Level 2 Designated Intermediate System has changed.
                       juniIsisCircMCAddr 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.31 integer read-only
Specifies which type of multicast address will be used for sending HELLO PDUs on this circuit. Enumeration: 'group': 1, 'functional': 2.
                       juniIsisCircPtToPtCircID 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.32 circuitid read-only
The ID of the circuit allocated during initialization. If no value has been negotiated (either because the adjacency is to an End System, or because initialization has not yet successfully completed), this object has the value which would be proposed for this circuit (i.e. the concatenation of the local system ID and the one octet local Circuit ID for this circuit.
                       juniIsisCircL1HelloTimer 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.33 integer32 read-write
Maximum period, in seconds, between Level 1 IIH PDUs on multiaccess networks. It is also used as the period between Hellos on point to point circuits. This object follows the resettingTimer behaviour.
                       juniIsisCircL2HelloTimer 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.34 integer32 read-write
Maximum period, in seconds, between Level 1 IIH PDUs on multiaccess networks. This object follows the resettingTimer behaviour.
                       juniIsisCircL1HelloMultiplier 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.35 integer32 read-write
This value is multiplied by the corresponding HelloTimer and the result in seconds (rounded up) is used as the holding time in transmitted hellos, to be used by receivers of hello packets from this IS.
                       juniIsisCircL2HelloMultiplier 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.36 integer32 read-write
This value is multiplied by the corresponding HelloTimer and the result in seconds (rounded up) is used as the holding time in transmitted hellos, to be used by receivers of hello packets from this IS
                       juniIsisCircMinLSPTransInt 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.37 unsigned32 read-write
Minimum interval, in milliseconds, between transmission of LSPs on a circuit. This object follows the resettingTimer behaviour. This timer shall be capable of a resolution not coarser than 10 milliseconds.
                       juniIsisCircMinLSPReTransInt 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.38 integer32 read-write
Minimum interval, in seconds, between re-transmission of an Level 1 or 2 LSP. This object follows the resettingTimer behaviour.
                       juniIsisCircL1CSNPInterval 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.39 integer32 read-write
Interval of time, in seconds, between transmission of Level 1 CSNPs on multiaccess networks if this router is the designated router. On point-to-point networks the default is to not transmit CSNPs. Hence CSNP interval will be 0 for point-to-point networks.
                       juniIsisCircL2CSNPInterval 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.40 integer32 read-write
Interval of time, in seconds, between transmission of Level 2 CSNPs on multiaccess networks if this router is the designated router. On point-to-point networks the default is to not transmit CSNPs. Hence CSNP interval will be 0 for point-to-point networks.
                       juniIsisCircLSPThrottle 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.41 integer32 read-write
Minimal interval of time, in milliseconds, between retransmissions of LSPs on a point to point interface.
                       juniIsisCircMeshGroupEnabled 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.42 integer read-write
Is this port a member of a mesh group, or blocked? Circuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh group will not be flooded to another circuit in the same mesh group. Enumeration: 'inactive': 1, 'set': 3, 'blocked': 2.
                       juniIsisCircMeshGroup 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.43 unsigned32 read-write
Circuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh group will not be flooded to another circuit in the same mesh group. If juniIsisCircMeshGroupEnabled is false, this value is ignored. Default value returned as 0 has no significance for this variable.
                       juniIsisCircLevel 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.44 integer read-write
The type of this circuit. This object follows the replaceOnlyWhileDisabled behavior. Enumeration: 'level2Only': 2, 'level1l2IS': 1, 'level1IS': 0.
                       juniIsisCircState 1.3.6.1.4.1.4874.2.2.38.1.2.1.1.45 integer read-only
The operational state of the circuit. Enumeration: 'isisCircuitDown': 1, 'isisCircuitUp': 2.
               juniIsisSysL1CircAuthenticationTable 1.3.6.1.4.1.4874.2.2.38.1.2.2 no-access
This table contains the manually configured set of Level 1 Circuit authentication keys supported by each instance of the Integrated ISIS protocol.
                   juniIsisSysL1CircAuthenticationEntry 1.3.6.1.4.1.4874.2.2.38.1.2.2.1 no-access
Each entry contains one Level 1 circuit authentication key supported by an instance of the Integrated ISIS protocol.
                       juniIsisSysL1CircAuthenticationSysInstance 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.1 integer32 no-access
The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.
                       juniIsisSysL1CircAuthenticationIfIndex 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.2 integer32 no-access
The value of ifIndex for the interface to which this circuit corresponds.
                       juniIsisSysL1CircAuthenticationKeyId 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.3 integer32 no-access
The unique identifier of the instance to which this row corresponds. This object follows the index behaviour.
                       juniIsisSysL1CircAuthenticationPwd 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.4 octet string read-write
The value to be used as the Authentication Key in Level 1 Hello Packets whenever the value of juniIsisSysL1CircAuthenticationKeyType has a value of hmacMd5. A modification of juniIsisSysL1CircAuthenticationKeyType does not modify the juniIsisSysL1CircAuthenticationPwd value. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.
                       juniIsisSysL1CircAuthenticationKeyType 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.5 integer read-write
What authentication scheme, if any, is used to protect Level 1 hello packets. Enumeration: 'plaintext': 1, 'hmacMd5': 2, 'none': 0.
                       juniIsisSysL1CircAuthenticationStartAcceptTime 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.6 authtime read-write
The date and time when this authentication key will start to be used to validate level 1 IIH packets received. The Default value the start accept time will be the current time when the key was created.
                       juniIsisSysL1CircAuthenticationStartGenerateTime 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.7 authtime read-write
The date and time when this authentication key will start to be used to authenticate level 1 IIH packets transmitted. The Default value the start accept time will be the current time when the key was created + 2 minutes.
                       juniIsisSysL1CircAuthenticationStopAcceptTime 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.8 authtime read-write
The date and time when this authentication key will stop being accepted as a valid level 1 IIH packets key received. A value of zero indicates the key will never stop being used to authenticate packets.
                       juniIsisSysL1CircAuthenticationStopGenerateTime 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.9 authtime read-write
The date and time when this authentication key will stop being used to authenticate level 1 IIH packets transmitted. A value of zero indicates the key will never stop being used to authenticate packets.
                       juniIsisSysL1CircAuthenticationRowStatus 1.3.6.1.4.1.4874.2.2.38.1.2.2.1.10 rowstatus read-write
The existence state of this authentication key. This object follows the RowStatus behaviour.
               juniIsisSysL2CircAuthenticationTable 1.3.6.1.4.1.4874.2.2.38.1.2.3 no-access
This table contains the manually configured set of Level 2 Circuit authentication keys supported by each instance of the Integrated ISIS protocol.
                   juniIsisSysL2CircAuthenticationEntry 1.3.6.1.4.1.4874.2.2.38.1.2.3.1 no-access
Each entry contains one Level 2 circuit authentication key supported by an instance of the Integrated ISIS protocol.
                       juniIsisSysL2CircAuthenticationSysInstance 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.1 integer32 no-access
The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.
                       juniIsisSysL2CircAuthenticationIfIndex 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.2 integer32 no-access
The value of ifIndex for the interface to which this circuit corresponds.
                       juniIsisSysL2CircAuthenticationKeyId 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.3 integer32 no-access
The unique identifier of the instance to which this row corresponds. This object follows the index behaviour.
                       juniIsisSysL2CircAuthenticationPwd 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.4 octet string read-write
The value to be used as the Authentication Key in Level 2 Hello Packets whenever the value of juniIsisSysL2CircAuthenticationKeyType has a value of hmacMd5. A modification of juniIsisSysL2CircAuthenticationKeyType does not modify the juniIsisSysL2CircAuthenticationPwd value. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.
                       juniIsisSysL2CircAuthenticationKeyType 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.5 integer read-write
What authentication scheme, if any, is used to protect Level 2 hello packets. Enumeration: 'plaintext': 1, 'hmacMd5': 2, 'none': 0.
                       juniIsisSysL2CircAuthenticationStartAcceptTime 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.6 authtime read-write
The date and time when this authentication key will start to be used to validate level 2 IIH packets received. The Default value the start accept time will be the current time when the key was created.
                       juniIsisSysL2CircAuthenticationStartGenerateTime 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.7 authtime read-write
The date and time when this authentication key will start to be used to authenticate level 2 IIH packets transmitted. The Default value the start accept time will be the current time when the key was created + 2 minutes.
                       juniIsisSysL2CircAuthenticationStopAcceptTime 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.8 authtime read-write
The date and time when this authentication key will stop being accepted as a valid level 2 IIH packets key received. A value of zero indicates the key will never stop being used to authenticate packets.
                       juniIsisSysL2CircAuthenticationStopGenerateTime 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.9 authtime read-write
The date and time when this authentication key will stop being used to authenticate level 2 IIH packets transmitted. A value of zero indicates the key will never stop being used to authenticate packets.
                       juniIsisSysL2CircAuthenticationRowStatus 1.3.6.1.4.1.4874.2.2.38.1.2.3.1.10 rowstatus read-write
The existence state of this authentication key. This object follows the RowStatus behaviour.
               juniIsisCircBFDTable 1.3.6.1.4.1.4874.2.2.38.1.2.4 no-access
The Juniper ISIS circuit table describes the BFD-specific characteristics of interfaces.
                   juniIsisCircBFDEntry 1.3.6.1.4.1.4874.2.2.38.1.2.4.1 no-access
The Juniper ISIS circuit table describes the BFD-specific characteristics of one interface.
                       juniIsisCircBfdEnable 1.3.6.1.4.1.4874.2.2.38.1.2.4.1.1 truthvalue read-only
This variable indicates whether BFD session on the interface is active or not
                       juniIsisCircBfdMinRxInterval 1.3.6.1.4.1.4874.2.2.38.1.2.4.1.2 integer32 read-only
This variable specifies upper-limit on rate local-system requires remote-system to transmit bfd control-packets [milliseconds]
                       juniIsisCircBfdMinTxInterval 1.3.6.1.4.1.4874.2.2.38.1.2.4.1.3 integer32 read-only
This variable specifies lower-limit on rate local-system requires remote-system to transmit bfd control-packets [milliseconds]
                       juniIsisCircBfdMultiplier 1.3.6.1.4.1.4874.2.2.38.1.2.4.1.4 integer32 read-only
This variable specifies detection-multiplier
       juniIsisTrapGroup 1.3.6.1.4.1.4874.2.2.38.2
       juniIsisConformance 1.3.6.1.4.1.4874.2.2.38.3
           juniIsisCompliances 1.3.6.1.4.1.4874.2.2.38.3.1
               juniIsisCompliance 1.3.6.1.4.1.4874.2.2.38.3.1.1
Obsolete compliance statement for systems supporting ISIS functionality. This statement became obsolete when the juniIsisCircState object was added.
               juniIsisCompliance2 1.3.6.1.4.1.4874.2.2.38.3.1.2
Obsolete compliance statement for systems supporting ISIS functionality. This statement became obsolete when MPSL support was added.
               juniIsisCompliance3 1.3.6.1.4.1.4874.2.2.38.3.1.3
The compliance statement for systems supporting ISIS functionality. This statement became obsolete when juniIsisCircBFDTable is implemented.
               juniIsisCompliance4 1.3.6.1.4.1.4874.2.2.38.3.1.4
The compliance statement for systems supporting ISIS functionality.
               juniIsisCompliance5 1.3.6.1.4.1.4874.2.2.38.3.1.5
The compliance statement for systems supporting ISIS functionality.
               juniIsisCompliance6 1.3.6.1.4.1.4874.2.2.38.3.1.6
The compliance statement for systems supporting ISIS functionality.
           juniIsisMIBGroups 1.3.6.1.4.1.4874.2.2.38.3.2
               juniIsisSystemMgmtGroup 1.3.6.1.4.1.4874.2.2.38.3.2.1
Obsolete system level objects for ISIS management functionality. This group became obsolete when the MPLS management objects were added.
               juniIsisCircuitMgmtGroup 1.3.6.1.4.1.4874.2.2.38.3.2.2
Obsolete circuit management objects. This group became obsolete when the juniIsisCircState object was added.
               juniIsisCircuitMgmtGroup2 1.3.6.1.4.1.4874.2.2.38.3.2.3
The circuit management objects.
               juniIsisSystemMgmtGroup2 1.3.6.1.4.1.4874.2.2.38.3.2.4
Obsolete system level objects for ISIS management functionality. This group became obsolete when the MPLS tunnel table was added.
               juniIsisCircBFDGroup 1.3.6.1.4.1.4874.2.2.38.3.2.5
The circuit level ISIS BFD configuration parameters.
               juniIsisSystemMgmtGroup3 1.3.6.1.4.1.4874.2.2.38.3.2.6
Obsolete system level objects for ISIS management functionality. This group became obsolete when the reference bandwidth related variables were added.
               juniIsisSystemMgmtGroup4 1.3.6.1.4.1.4874.2.2.38.3.2.7
The system level objects for ISIS management functionality.