Juniper-ETHERNET-MIB: View SNMP OID List / Download MIB

VENDOR: JUNIPER


 Home MIB: Juniper-ETHERNET-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, Juniper-MIBs, Juniper-TC, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 juniEthernetMIB 1.3.6.1.4.1.4874.2.2.34
The Ethernet MIB for the Juniper Networks enterprise. This MIB contains managed objects for the Ethernet interfaces that extend the IF-MIB.ifTable. It also contains managed objects for creation of Ethernet subInterfaces.
       juniEthernetObjects 1.3.6.1.4.1.4874.2.2.34.1
           juniEthernetIfLayer 1.3.6.1.4.1.4874.2.2.34.1.1
               juniEthernetIfTable 1.3.6.1.4.1.4874.2.2.34.1.1.1 no-access
The parameters for the Ethernet interface.
                   juniEthernetIfEntry 1.3.6.1.4.1.4874.2.2.34.1.1.1.1 no-access
The Parameters for a particular Ethernet interface. Entries in this table correspond with entries in the ifTable/ifXTable/juniIfTable.
                       juniEthernetIfIndex 1.3.6.1.4.1.4874.2.2.34.1.1.1.1.1 interfaceindex no-access
The ifIndex value of the corresponding ethernet interface.
                       juniEthernetIfDuplexMode 1.3.6.1.4.1.4874.2.2.34.1.1.1.1.2 integer read-write
The configured duplex setting for this ethernet interface. The operational value is reported in this table entry's corresponding juniEthernetIfOperDuplexMode object. NOTE, configuration dependency: Setting this object to values other than 'autoDuplex' takes effect only when the corresponding juniEthernetIfSpeed object is simultaneously set to other than 'autoNegotiate'. Otherwise (i.e. this object is set to 'autoDuplex', AND/OR corresponding juniEthernetIfSpeed object is set to 'autoNegotiate'), duplex mode is negotiated. Enumeration: 'fullDuplex': 3, 'autoDuplex': 1, 'halfDuplex': 2.
                       juniEthernetIfSpeed 1.3.6.1.4.1.4874.2.2.34.1.1.1.1.3 integer read-write
The configured speed setting for this ethernet interface. The operational value is reported in the corresponding Interfaces MIB ifSpeed object. NOTE, configuration dependency: Setting this object to values other than 'autoNegotiate' takes effect only when the corresponding juniEthernetIfDuplexMode object is simultaneously set to other than 'autoDuplex'. Otherwise (i.e. this object is set to 'autoNegotiate', AND/OR the corresponding juniEthernetIfDuplexMode object is set to 'autoDuplex'), speed is negotiated. Enumeration: 'speed1000Mbps': 4, 'autoNegotiate': 1, 'speed100Mbps': 3, 'speed10000Mbps': 5, 'speed10Mbps': 2.
                       juniEthernetIfMtu 1.3.6.1.4.1.4874.2.2.34.1.1.1.1.4 integer32 read-write
The configured maximum transfer unit (MTU) for this ethernet interface. The operational value is reported in the corresponding Interfaces MIB ifMtu object.
                       juniEthernetIfOperDuplexMode 1.3.6.1.4.1.4874.2.2.34.1.1.1.1.5 integer read-only
The current operational duplex mode for this ethernet interface. Enumeration: 'fullDuplex': 3, 'autoDuplex': 1, 'halfDuplex': 2.
                       juniEthernetIfPrimaryMauType 1.3.6.1.4.1.4874.2.2.34.1.1.1.1.6 juniethernetifmautype read-only
The primary MAU type.
                       juniEthernetIfSecondaryMauType 1.3.6.1.4.1.4874.2.2.34.1.1.1.1.7 juniethernetifmautype read-only
The secondary MAU type for those ports that support a secondary.
                       juniEthernetIfPrimaryLength 1.3.6.1.4.1.4874.2.2.34.1.1.1.1.8 integer32 read-only
The rated cable length in meters for the primary MAU. If the value is 0, the length is unspecified.
                       juniEthernetIfSecondaryLength 1.3.6.1.4.1.4874.2.2.34.1.1.1.1.9 integer32 read-only
The rated cable length in meters for the secondary MAU for those ports that support a secondary. If the value is 0, the length is unspecified.
           juniEthernetSubIfLayer 1.3.6.1.4.1.4874.2.2.34.1.2
               juniEthernetSubIfNextIfIndex 1.3.6.1.4.1.4874.2.2.34.1.2.1 juninextifindex read-only
Coordinate ifIndex value allocation for entries in juniEthernetSubIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.
               juniEthernetSubIfTable 1.3.6.1.4.1.4874.2.2.34.1.2.2 no-access
This table contains entries for Ethernet Subinterfaces present in the system.
                   juniEthernetSubIfEntry 1.3.6.1.4.1.4874.2.2.34.1.2.2.1 no-access
Each entry describes the characteristics of an Ethernet Subinterface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in ifTable/ifXTable/juniIfTable.
                       juniEthernetSubIfIndex 1.3.6.1.4.1.4874.2.2.34.1.2.2.1.1 interfaceindex no-access
The ifIndex of the Ethernet Subinterface. When creating entries in this table, suitable values for this object are determined by reading juniEthernetSubNextIfIndex.
                       juniEthernetSubIfRowStatus 1.3.6.1.4.1.4874.2.2.34.1.2.2.1.2 rowstatus read-only
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: juniEthernetSubIfRowStatus juniEthernetSubIfLowerIfIndex In addition, when creating an entry the following conditions must hold: A value for juniEthernetSubIfIndex must have been determined previously, by reading juniEthernetSubIfNextIfIndex. The interface identified by juniEthernetSubIfLowerIfIndex must exist, and must be a Ethernet interface. A positive value configured for juniEthernetSubIfId must not already be assigned to another subinterface layered onto the same underlying Ethernet interface. A corresponding entry in ifTable/ifXTable/juniIfTable is created/destroyed as a result of creating/destroying an entry in this table.
                       juniEthernetSubIfLowerIfIndex 1.3.6.1.4.1.4874.2.2.34.1.2.2.1.3 interfaceindexorzero read-only
The ifIndex of a Ethernet interface over which this Ethernet Subinterface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation.
                       juniEthernetSubIfId 1.3.6.1.4.1.4874.2.2.34.1.2.2.1.4 integer32 read-only
An integer identifier for the Ethernet subinterface, used in conjunction with the command-line interface. It is provided here for cross-reference purposes only. The value must be unique among subinterfaces configured on the same underlying Ethernet interface. If this object is not configured, or is configured with a value of -1, a nonzero value will be allocated internally and can be retrieved from this object after table entry creation has succeeded. A value of zero for this object is reserved for future use.
           juniVlanMajorIfLayer 1.3.6.1.4.1.4874.2.2.34.1.3
               juniVlanMajorNextIfIndex 1.3.6.1.4.1.4874.2.2.34.1.3.1 juninextifindex read-only
Coordinate ifIndex value allocation for entries in juniVlanMajorIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.
               juniVlanMajorIfTable 1.3.6.1.4.1.4874.2.2.34.1.3.2 no-access
This table contains entries for major VLAN interfaces present in the system.
                   juniVlanMajorIfEntry 1.3.6.1.4.1.4874.2.2.34.1.3.2.1 no-access
Each entry describes the characteristics of a major VLAN interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in ifTable/ifXTable/juniIfTable.
                       juniVlanMajorIfIndex 1.3.6.1.4.1.4874.2.2.34.1.3.2.1.1 interfaceindex no-access
The ifIndex of the major VLAN interface. When creating entries in this table, suitable values for this object are determined by reading juniVlanMajorNextIfIndex.
                       juniVlanMajorIfLowerIfIndex 1.3.6.1.4.1.4874.2.2.34.1.3.2.1.2 interfaceindexorzero read-only
The ifIndex of the interface over which this major VLAN interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation.
                       juniVlanMajorIfRowStatus 1.3.6.1.4.1.4874.2.2.34.1.3.2.1.3 rowstatus read-only
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create or delete an entry in this table, the following entry objects MUST be explicitly configured: juniVlanMajorIfRowStatus juniVlanMajorIfLowerIfIndex In addition, when creating an entry the following conditions must hold: A value for juniVlanMajorIfIndex must have been determined previously by reading juniVlanMajorIfNextIfIndex. The interface identified by juniVlanMajorIfLowerIfIndex must exist. A corresponding entry in ifTable/ifXTable/juniIfTable is created/destroyed as a result of creating/destroying an entry in this table.
           juniVlanSubIfLayer 1.3.6.1.4.1.4874.2.2.34.1.4
               juniVlanSubNextIfIndex 1.3.6.1.4.1.4874.2.2.34.1.4.1 juninextifindex read-only
Coordinate ifIndex value allocation for entries in juniVlanSubIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.
               juniVlanSubIfTable 1.3.6.1.4.1.4874.2.2.34.1.4.2 no-access
This table contains entries for VLAN Subinterfaces present in the system.
                   juniVlanSubIfEntry 1.3.6.1.4.1.4874.2.2.34.1.4.2.1 no-access
Each entry describes the characteristics of a VLAN Subinterface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in ifTable/ifXTable/juniIfTable.
                       juniVlanSubIfIndex 1.3.6.1.4.1.4874.2.2.34.1.4.2.1.1 interfaceindex no-access
The ifIndex of the VLAN Subinterface. When creating entries in this table, suitable values for this object are determined by reading juniVlanSubNextIfIndex.
                       juniVlanSubIfVlanId 1.3.6.1.4.1.4874.2.2.34.1.4.2.1.2 integer32 read-only
An integer identifier or tag ID for this VLAN A value of zero indicates the default VLAN. When VLANs are enabled, the value must be unique among subinterfaces configured on the same underlying major VLAN interface. If the VLAN ID is non-zero, then the juniVlanSubIfVlanUntagged field must be disabled. The VLAN ID default value of 5000 indicates that the VLAN Subinterface has been created but the VLAN ID has yet to be assigned. The VLAN ID value of 5001 indicates that this VLAN Subinterface is of type S-VLAN any. The juniVlanSubIfVlanStackId object should be set to a non-default value (i.e. this VLAN Subinterface should be a S-VLAN).
                       juniVlanSubIfVlanUntagged 1.3.6.1.4.1.4874.2.2.34.1.4.2.1.3 truthvalue read-only
When VLANs are enabled, this allows tagged frames to be received, while transmitted frames remain untagged. This can only be enabled when the juniVlanSubIfVlanId field is zero.
                       juniVlanSubIfLowerIfIndex 1.3.6.1.4.1.4874.2.2.34.1.4.2.1.4 interfaceindexorzero read-only
The ifIndex of VLAN major interface over which this VLAN Subinterface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation.
                       juniVlanSubIfRowStatus 1.3.6.1.4.1.4874.2.2.34.1.4.2.1.5 rowstatus read-only
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: juniVlanSubIfRowStatus juniVlanSubIfLowerIfIndex juniVlanSubIfVlanId juniVlanSubIfVlanUntagged To delete an entry in this table, the following entry objects MUST be explicitly configured: juniVlanSubIfRowStatus juniVlanSubIfLowerIfIndex In addition, when creating an entry the following conditions must hold: A value for juniVlanSubIfIndex must have been determined previously by reading juniVlanSubIfNextIfIndex. The interface identified by juniVlanSubIfLowerIfIndex must exist, and must be a Ethernet interface. A corresponding entry in ifTable/ifXTable/juniIfTable is created/destroyed as a result of creating/destroying an entry in this table.
                       juniVlanSubIfVlanStackId 1.3.6.1.4.1.4874.2.2.34.1.4.2.1.6 integer32 read-only
An integer identifier or tag ID for this S-VLAN. When S-VLANs are enabled, the VLAN and S-VLAN ID valuse must be unique among subinterfaces configured on the same underlying major VLAN interface. If the S-VLANs are enabled, then the juniVlanSubIfVlanUntagged field must be disabled. The S-VLAN ID default value of 5000 indicates that this VLAN Subinterface is not configured as a S-VLAN.
                       juniVlanSubIfVlanStackEthertype 1.3.6.1.4.1.4874.2.2.34.1.4.2.1.7 integer read-only
The ethertype is used to recognize and demultiplex traffic for this S-VLAN. Must be either 0x8100, 0x88a8, or 0x9100. Enumeration: 'etherType9100h': 37120, 'etherType8100h': 33024, 'etherType88a8h': 34984.
                       juniVlanSubIfVlanAdvisoryRxSpeed 1.3.6.1.4.1.4874.2.2.34.1.4.2.1.8 integer32 read-only
Advisory receive speed, in kilobits per second (kbps), of this subinterface. This object has no impact on forwarding performance but may be used as a hint for underlying circuit receive speed.
                       juniVlanSubIfVlanAdvisoryTxSpeed 1.3.6.1.4.1.4874.2.2.34.1.4.2.1.9 integer32 read-only
Advisory transmit speed, in kilobits per second (kbps), of this subinterface. This object has no impact on forwarding performance but may be used as a hint for underlying circuit transmit speed.
           juniEthernetIfStats 1.3.6.1.4.1.4874.2.2.34.1.5
               juniEthernetIfStatsTable 1.3.6.1.4.1.4874.2.2.34.1.5.1 no-access
The parameters for the Ethernet interface statistics.
                   juniEthernetIfStatsEntry 1.3.6.1.4.1.4874.2.2.34.1.5.1.1 no-access
The Parameters for a particular Ethernet interface statistics.
                       juniEthernetIfStatsIndex 1.3.6.1.4.1.4874.2.2.34.1.5.1.1.1 interfaceindex no-access
The ifIndex value of the corresponding ethernet interface.
                       juniEthernetIfIngressLineUtilization 1.3.6.1.4.1.4874.2.2.34.1.5.1.1.2 unsigned32 read-only
The ingress line utilization statistic for this ethernet interface.
                       juniEthernetIfEgressLineUtilization 1.3.6.1.4.1.4874.2.2.34.1.5.1.1.3 unsigned32 read-only
The egress line utilization statistic for this ethernet interface.
           juniLagIfLayer 1.3.6.1.4.1.4874.2.2.34.1.6
               juniLagNextIfIndex 1.3.6.1.4.1.4874.2.2.34.1.6.1 juninextifindex read-only
Coordinate ifIndex value allocation for entries in juniLagIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.
       juniEthernetConformance 1.3.6.1.4.1.4874.2.2.34.4
           juniEthernetCompliances 1.3.6.1.4.1.4874.2.2.34.4.1
               juniEthernetCompliance 1.3.6.1.4.1.4874.2.2.34.4.1.1
Obsolete compliance statement for entities which implement the Juniper Ethernet MIB. This statement became obsolete when support for VLANs was added.
               juniEthernetCompliance2 1.3.6.1.4.1.4874.2.2.34.4.1.2
Obsolete compliance statement for entities which implement the Juniper Ethernet MIB. This statement became obsolete when VLAN stack support was added.
               juniEthernetCompliance3 1.3.6.1.4.1.4874.2.2.34.4.1.3
Obsolete compliance statement for entities which implement the Juniper Ethernet MIB. This statement became obsolete when MAU type and length support was added.
               juniEthernetCompliance4 1.3.6.1.4.1.4874.2.2.34.4.1.4
The compliance statement for entities which implement the Juniper Ethernet MIB. This statement became obsolete when Ethernet interface statistics support was added.
               juniEthernetCompliance5 1.3.6.1.4.1.4874.2.2.34.4.1.5
The compliance statement for entities which implement the Juniper Ethernet MIB.
               juniEthernetCompliance6 1.3.6.1.4.1.4874.2.2.34.4.1.6
The compliance statement for entities which implement the Juniper Ethernet MIB.
           juniEthernetGroups 1.3.6.1.4.1.4874.2.2.34.4.2
               juniEthernetGroup 1.3.6.1.4.1.4874.2.2.34.4.2.1
Obsolete collection of objects providing management of Ethernet interfaces in a Juniper product. This group became obsolete when MAU type and length support was added.
               juniEthernetSubIfGroup 1.3.6.1.4.1.4874.2.2.34.4.2.2
A collection of objects providing management of Ethernet SubInterfaces in a Juniper product.
               juniVlanGroup 1.3.6.1.4.1.4874.2.2.34.4.2.3
A collection of objects providing management of Major VLAN interfaces in a Juniper product.
               juniVlanSubIfGroup 1.3.6.1.4.1.4874.2.2.34.4.2.4
Obsolete collection of objects providing management of VLAN SubInterfaces in a Juniper product. This group became obsolete when VLAN stack support was added.
               juniVlanSubIfGroup2 1.3.6.1.4.1.4874.2.2.34.4.2.5
A collection of objects providing management of VLAN SubInterfaces in a Juniper product.
               juniEthernetGroup2 1.3.6.1.4.1.4874.2.2.34.4.2.6
A collection of objects providing management of Ethernet interfaces in a Juniper product.
               juniEthernetIfStatsGroup 1.3.6.1.4.1.4874.2.2.34.4.2.7
A collection of objects providing Ethernet interface statistics in a Juniper product.
               juniLagIfGroup 1.3.6.1.4.1.4874.2.2.34.4.2.8
A collection of objects providing management of LAG interfaces in a Juniper product.