Juniper-DS1-MIB: View SNMP OID List / Download MIB

VENDOR: JUNIPER


 Home MIB: Juniper-DS1-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, Juniper-MIBs, Juniper-TC, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 juniDs1MIB 1.3.6.1.4.1.4874.2.2.5
The DS1/E1 MIB for the Juniper enterprise. This MIB contains managed objects to supplement those found in RFC1406 DS1/E1 MIB.
     juniDs1Objects 1.3.6.1.4.1.4874.2.2.5.1
         juniDsx1ConfigTable 1.3.6.1.4.1.4874.2.2.5.1.1 no-access
This table contains entries for DS1/E1 interfaces present in the system.
             juniDsx1ConfigEntry 1.3.6.1.4.1.4874.2.2.5.1.1.1 no-access
Each entry describes the characteristics of an DS1/E1 interface.
                 juniDsx1TimeSlotMap 1.3.6.1.4.1.4874.2.2.5.1.1.1.1 junitimeslotmap read-only
A bitmap representing the timeslots on the DS1/E1 interface that have been allocated for service. For channelized DS1/E1, set bits reflect the union of timeslot allocations across all fractional arrangements operating over this DS1/E1 interface. For unchannelized DS1/E1, all relevant timeslot bits will be set.
                 juniDsx1Ds1ChannelNumber 1.3.6.1.4.1.4874.2.2.5.1.1.1.2 integer32 read-only
This variable represents the channel number of the DS1/E1 on its parent DS3/E3. A value of 0 indicates this DS1/E1 does not have a parent DS3/E3.
                 juniDsx1Capabilities 1.3.6.1.4.1.4874.2.2.5.1.1.1.3 integer32 read-only
A value which indicates the set of capabilities of the DS1/E1 interface. The value is a sum. This sum initially takes the value zero. Then, for each capability, C, in the range 1 through 3, that this interface supports, 2 raised to (C - 1) is added to the sum. For example, an interface which is only E1 capable would have a value of 2 (2^(2-1)). In contrast, an interface which is both T1 and J1 capable would have a value of 5 (2^(1-1) + 2^(3-1)). The values for DS1/E1 interface capabilities are as follows: capability function 1 T1 2 E1 3 J1
                 juniDsx1Mode 1.3.6.1.4.1.4874.2.2.5.1.1.1.4 integer read-only
This variable represents the DS1/E1 interface mode. The value of the juniDsx1Capabilities object for the DS1/E1 interface indicates the valid set of values for this object. Enumeration: 'e1': 2, 'j1': 3, 't1': 1.
                 juniDsx1LineBuildOutCapabilities 1.3.6.1.4.1.4874.2.2.5.1.1.1.5 integer32 read-only
A value which indicates the set of line build out capabilities of the DS1/E1 interface. The value is a sum. This sum initially takes the value zero. Then, for each line build out capability, C, in the range 1 or 2, that this interface supports, 2 raised to (C - 1) is added to the sum. For example, an interface which is only short haul capable would have a value of 2 (2^(2-1)). In contrast, an interface which is both short haul and long haul capable would have a value of 3 (2^(1-1) + 2^(2-1)). The values for DS1/E1 interface line build out capabilities are as follows: line build out capability function 1 short haul 2 long haul
                 juniDsx1LineBuildOutType 1.3.6.1.4.1.4874.2.2.5.1.1.1.6 integer read-only
This variable represents the configured line build out type of the DS1/E1 interface. The value of the juniDsx1LineBuildOutCapabilities object for the DS1/E1 interface indicates the valid set of values for this object. Enumeration: 'longHaul': 2, 'notSupported': 3, 'shortHaul': 1.
                 juniDsx1LineAttenuation 1.3.6.1.4.1.4874.2.2.5.1.1.1.7 integer read-only
This variable represents the configured line attenuation of the DS1/E1 interface. Note that the value of this object only takes effect when the value of the juniDsx1LineBuildOutType for the DS1/E1 interface is set to longHaul(2). Enumeration: 'dbMinus7Point5': 2, 'db0': 1, 'notSupported': 5, 'dbMinus22Point5': 4, 'dbMinus15': 3.
                 juniDsx1LineLength 1.3.6.1.4.1.4874.2.2.5.1.1.1.8 integer32 read-only
This variable represents the length of the DS1/E1 line in meters. Note that the value of this object only takes effect when the value of the juniDsx1LineBuildOutType for the DS1/E1 interface is set to shortHaul(1).
                 juniDsx1LowerIfIndex 1.3.6.1.4.1.4874.2.2.5.1.1.1.9 interfaceindexorzero read-only
The ifIndex of the interface over which this Dsx1 interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation.
                 juniDsx1RowStatus 1.3.6.1.4.1.4874.2.2.5.1.1.1.10 rowstatus read-only
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: juniDsx1RowStatus juniDsx1LowerIfIndex In addition, when creating an entry the following conditions must hold: A value for ifIndex must have been determined previously, by reading juniDsx1NextIfIndex. The interface identified by juniDsx1hLowerIfIndex must exist. A corresponding entry in ifTable/ifXTable/juniIfTable is created/ destroyed as a result of creating/destroying an entry in this table.
                 juniDsx1SendCode 1.3.6.1.4.1.4874.2.2.5.1.1.1.11 integer read-only
This variable indicates what type of code is being sent across the DS1 interface by the device. Enumeration: 'sendTwo23Pattern': 11, 'sendUnfrTwo11Pattern': 16, 'sendUnfrTwo23Pattern': 19, 'sendAllZerosPattern': 5, 'sendUnfrAltZeroOnePattern': 15, 'sendUnfrTwo20Pattern': 18, 'sendUnfrAllOnesPattern': 14, 'sendTwo15Pattern': 9, 'sendQRSPattern': 4, 'sendBellcoreInbandLineCode': 3, 'sendBellcoreLineCode': 2, 'sendTwo11Pattern': 8, 'sendTwo20Pattern': 10, 'sendInbandLineCode': 1, 'sendAllOnesPattern': 6, 'otherPattern': 20, 'sendAltZeroOnePattern': 7, 'sendUnfrTwo15Pattern': 17, 'sendUnfrAllZerosPattern': 13, 'sendUnfrQRSPattern': 12.
                 juniDsx1YellowAlarm 1.3.6.1.4.1.4874.2.2.5.1.1.1.12 integer read-only
This bitmap indicates the yellow alarm settings, and is the sum of the capabilities. Enumeration: 'none': 4, 'detect': 2, 'generateAndDetect': 3, 'generate': 1.
                 juniDsx1RemoteLoopback 1.3.6.1.4.1.4874.2.2.5.1.1.1.13 integer read-only
This variable indicates the remote loopback setting. Enumeration: 'disabled': 0, 'enabled': 1.
                 juniDsx1FdlCarrier 1.3.6.1.4.1.4874.2.2.5.1.1.1.14 integer read-only
Specifies the interface is used in carrier environment. Enumeration: 'disabled': 0, 'enabled': 1.
                 juniDsx1FdlEic 1.3.6.1.4.1.4874.2.2.5.1.1.1.15 displaystring read-only
This is the equipment identification code.
                 juniDsx1FdlLic 1.3.6.1.4.1.4874.2.2.5.1.1.1.16 displaystring read-only
This is the location identification code.
                 juniDsx1FdlFic 1.3.6.1.4.1.4874.2.2.5.1.1.1.17 displaystring read-only
This is the frame identification code.
                 juniDsx1FdlUnit 1.3.6.1.4.1.4874.2.2.5.1.1.1.18 displaystring read-only
This is the unit identification code.
                 juniDsx1FdlPfi 1.3.6.1.4.1.4874.2.2.5.1.1.1.19 displaystring read-only
This is the facility identification code.
                 juniDsx1FdlPort 1.3.6.1.4.1.4874.2.2.5.1.1.1.20 displaystring read-only
This is the equipment port number.
                 juniDsx1FdlGenerator 1.3.6.1.4.1.4874.2.2.5.1.1.1.21 displaystring read-only
This is the generator number.
                 juniDsx1FdlTransmit 1.3.6.1.4.1.4874.2.2.5.1.1.1.22 bits read-only
Specifies transmission enabling. path - Bit 0 for path transmit. When this bit is set indicates path transmit is enabled; otherwise path transmit disabled. idlesignal - Bit 1 for idlesignal transmit. When this bit is set idlesingal transmit is enabled; otherwise idlesignal transmit disabled. testsignal - Bit 2 for testsignal transmit. When this bit is set testsignal transmit is enabled; otherwise testsignal transmit disabled. The value of this object defaults to zero, indicating that none of FDL transmit methods are enabled. Bits: 'path': 0, 'testsignal': 2, 'idlesignal': 1.
         juniDs1NextIfIndex 1.3.6.1.4.1.4874.2.2.5.1.2 juninextifindex read-only
Coordinate ifIndex value allocation for entries in juniDsx1ConfigTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.
         juniDsx1FarEndConfigTable 1.3.6.1.4.1.4874.2.2.5.1.3 no-access
The DS1 Far End Configuration table.
             juniDsx1FarEndConfigEntry 1.3.6.1.4.1.4874.2.2.5.1.3.1 no-access
An entry in the DS1 Far End Configuration table.
                 juniDsx1FarEndLineIndex 1.3.6.1.4.1.4874.2.2.5.1.3.1.1 integer no-access
The index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value a dsx1LineIndex object instance.
                 juniDsx1FarEndEquipCode 1.3.6.1.4.1.4874.2.2.5.1.3.1.2 displaystring read-only
This is the Far End Equipment Identification code that describes the specific piece of equipment. It is sent within the Path Identification Message.
                 juniDsx1FarEndLocationIDCode 1.3.6.1.4.1.4874.2.2.5.1.3.1.3 displaystring read-only
This is the Far End Location Identification code that describes the specific location of the equipment. It is sent within the Path Identification Message.
                 juniDsx1FarEndFrameIDCode 1.3.6.1.4.1.4874.2.2.5.1.3.1.4 displaystring read-only
This is the Far End Frame Identification code that identifies where the equipment is located within a building at a given location. It is sent within the Path Identification Message.
                 juniDsx1FarEndUnitCode 1.3.6.1.4.1.4874.2.2.5.1.3.1.5 displaystring read-only
This is the Far End code that identifies the equipment location within a bay. It is sent within the Path Identification Message.
                 juniDsx1FarEndFacilityIDCode 1.3.6.1.4.1.4874.2.2.5.1.3.1.6 displaystring read-only
This code identifies a specific Far End DS1 path. It is sent within the Path Identification Message.
                 juniDsx1FarEndPortNumber 1.3.6.1.4.1.4874.2.2.5.1.3.1.7 displaystring read-only
This code identifies the port number of the Far End DS1. It is sent within the Idle Signal Message.
                 juniDsx1FarEndGeneratorNumber 1.3.6.1.4.1.4874.2.2.5.1.3.1.8 displaystring read-only
This code identifies the Far End DS1 Generator Number. It is sent within the Test Signal Message.
                 juniDsx1FarEndCarrier 1.3.6.1.4.1.4874.2.2.5.1.3.1.9 integer read-only
Specifies the interface is used in carrier environment. It is sent with all FDL messages. Enumeration: 'disabled': 0, 'enabled': 1.
     juniDs1Conformance 1.3.6.1.4.1.4874.2.2.5.4
         juniDs1Compliances 1.3.6.1.4.1.4874.2.2.5.4.1
             juniDs1Compliance 1.3.6.1.4.1.4874.2.2.5.4.1.1
Obsolete compliance statement for entities which implement the Juniper DS1/E1 MIB. This statement became obsolete when new objects were added.
             juniDs1Compliance2 1.3.6.1.4.1.4874.2.2.5.4.1.2
Obsolete compliance statement for entities which implement the Juniper DS1/E1 MIB. This statement became obsolete when dynamic DS1 interface support was added.
             juniDs1Compliance3 1.3.6.1.4.1.4874.2.2.5.4.1.3
Obsolete compliance statement for entities which implement the Juniper DS1/E1 MIB. This statement became obsolete when FDL support was added.
             juniDs1Compliance4 1.3.6.1.4.1.4874.2.2.5.4.1.4
Obsolete compliance statement for entities which implement the Juniper DS1/E1 MIB. This statement became obsolete when support for remote FDL strings and FDL transmit mode was added.
             juniDs1Compliance5 1.3.6.1.4.1.4874.2.2.5.4.1.5
The compliance statement for entities which implement the Juniper DS1/E1 MIB.
         juniDs1Groups 1.3.6.1.4.1.4874.2.2.5.4.2
             juniDs1Group 1.3.6.1.4.1.4874.2.2.5.4.2.1
Obsolete collection of objects providing management of DS1/E1 interfaces in a Juniper product. This group became obsolete when new objects where added to the MIB.
             juniDs1Group2 1.3.6.1.4.1.4874.2.2.5.4.2.2
Obsolete collection of objects providing management of DS1/E1 interfaces in a Juniper product. This group became obsolete when dynamic DS1 interface support was added.
             juniDs1Group3 1.3.6.1.4.1.4874.2.2.5.4.2.3
Obsolete collection of objects providing management of DS1/E1 interfaces in a Juniper product. This group became obsolete when FDL support was added.
             juniDs1Group4 1.3.6.1.4.1.4874.2.2.5.4.2.4
Obsolete collection of objects providing management of DS1/E1 interfaces in a Juniper product. This group became obsolete when support for remote FDL strings and FDL transmit mode was added.
             juniDs1Group5 1.3.6.1.4.1.4874.2.2.5.4.2.5
A collection of objects providing management of DS1/E1 interfaces in a Juniper product.