Juniper-BRIDGE-ETHERNET-MIB: View SNMP OID List / Download MIB

VENDOR: JUNIPER


 Home MIB: Juniper-BRIDGE-ETHERNET-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, Juniper-MIBs, Juniper-TC, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 juniBridgeEthernetMIB 1.3.6.1.4.1.4874.2.2.31
The Bridge Ethernet MIB for the Juniper Networks enterprise.
       juniBridgedEthernetObjects 1.3.6.1.4.1.4874.2.2.31.1
           juniBridgedEthernetIfLayer 1.3.6.1.4.1.4874.2.2.31.1.1
               juniBridgedEthernetNextIfIndex 1.3.6.1.4.1.4874.2.2.31.1.1.1 juninextifindex read-only
Coordinate ifIndex value allocation for entries in juniBridgedEthernetIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.
               juniBridgedEthernetIfTable 1.3.6.1.4.1.4874.2.2.31.1.1.2 no-access
The parameters for the BridgedEthernet service on this interface.
                   juniBridgedEthernetIfEntry 1.3.6.1.4.1.4874.2.2.31.1.1.2.1 no-access
The Parameters for a particular Bridged Ethernet interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in ifTable/ifXTable/juniIfTable.
                       juniBridgedEthernetIfIfIndex 1.3.6.1.4.1.4874.2.2.31.1.1.2.1.1 interfaceindex read-only
The ifIndex value of the corresponding ifEntry.
                       juniBridgedEthernetProxyArp 1.3.6.1.4.1.4874.2.2.31.1.1.2.1.2 integer read-only
The proxyArp configuration setting for this entry. *** NOTE: This MIB object has been obsoleted. *** Enumeration: 'enableUnrestricted': 2, 'enableRestricted': 1, 'disable': 3.
                       juniBridgedEthernetIfLowerIfIndex 1.3.6.1.4.1.4874.2.2.31.1.1.2.1.3 interfaceindexorzero read-only
The ifIndex of an interface over which this Bridged Ethernet interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation.
                       juniBridgedEthernetIfRowStatus 1.3.6.1.4.1.4874.2.2.31.1.1.2.1.4 rowstatus read-only
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: juniBridgedEthernetIfRowStatus juniBridgedEthernetIfLowerIfIndex In addition, when creating an entry the following conditions must hold: A value for juniBridgedEthernetIfIndex must have been determined previously, by reading juniBridgedEthernetNextIfIndex. The interface identified by juniBridgedEthernetIfLowerIfIndex must exist, and must be an interface type that permits layering of Bridged Ethernet above it. A corresponding entry in ifTable/ifXTable/juniIfTable is created/destroyed as a result of creating/destroying an entry in this table.
                       juniBridgedEthernetIfMtu 1.3.6.1.4.1.4874.2.2.31.1.1.2.1.5 integer32 read-only
The configured maximum transfer unit (MTU) for this ethernet interface. The operational value is reported in the corresponding Interfaces MIB ifMtu object.
       juniBridgeEthernetConformance 1.3.6.1.4.1.4874.2.2.31.4
           juniBridgeEthernetCompliances 1.3.6.1.4.1.4874.2.2.31.4.1
               juniBridgedEthernetCompliance 1.3.6.1.4.1.4874.2.2.31.4.1.1
The compliance statement for entities which implement the Juniper bridged Ethernet MIB. This statement became deprecated when additional configuration for Bridged Ethernet was added.
               juniBridgedEthernetCompliance2 1.3.6.1.4.1.4874.2.2.31.4.1.2
The compliance statement for entities which implement the Juniper bridged Ethernet MIB.
           juniBridgeEthernetGroups 1.3.6.1.4.1.4874.2.2.31.4.2
               juniBridgedEthernetGroup 1.3.6.1.4.1.4874.2.2.31.4.2.1
A collection of objects providing management of Bridged Ethernet interfaces in a Juniper product. This group became obsolete when juniBridgedEthernetProxyArp was made obsolete.
               juniBridgedEthernetGroup2 1.3.6.1.4.1.4874.2.2.31.4.2.2
A collection of objects providing management of Bridged Ethernet interfaces in a Juniper product. This group became deprecated when the juniBridgedEthernetIfMtu object was added.
               juniBridgedEthernetGroup3 1.3.6.1.4.1.4874.2.2.31.4.2.3
A collection of objects providing management of Bridged Ethernet interfaces in a Juniper product.