JUNIPER-IFOPTICS-MIB: View SNMP OID List / Download MIB

VENDOR: JUNIPER


 Home MIB: JUNIPER-IFOPTICS-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, JUNIPER-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 jnxIfOpticsMib 1.3.6.1.4.1.2636.3.71.1
This MIB module defines objects used for managing the Optics interface for Juniper products.
     jnxOptics 1.3.6.1.4.1.2636.3.71.1.1
         jnxOpticsConfigTable 1.3.6.1.4.1.2636.3.71.1.1.1 no-access
Information about the optics config Table.
             jnxOpticsConfigEntry 1.3.6.1.4.1.2636.3.71.1.1.1.1 no-access
A conceptual row that contains information about the optics config Table.
                 jnxOpticsConfigContainerIndex 1.3.6.1.4.1.2636.3.71.1.1.1.1.1 integer32 no-access
The associated jnxContentsContainerIndex - eg shelf..
                 jnxOpticsConfigL1Index 1.3.6.1.4.1.2636.3.71.1.1.1.1.2 integer32 no-access
The level one index associated with this subject ... eg fpc slot.
                 jnxOpticsConfigL2Index 1.3.6.1.4.1.2636.3.71.1.1.1.1.3 integer32 no-access
The level two index associated with this subject .. eg pic slot.
                 jnxOpticsConfigL3Index 1.3.6.1.4.1.2636.3.71.1.1.1.1.4 integer32 no-access
The level three index associated with this subject.. eg port.
                 jnxOpticsType 1.3.6.1.4.1.2636.3.71.1.1.1.1.5 integer32 read-only
0 - none 1 - SFP 2 - XFP 3 - SFP+ 4 - XFP+ 5 - CFP 6 - CFP+ 7 - Non pluggable
                 jnxLaserEnable 1.3.6.1.4.1.2636.3.71.1.1.1.1.6 truthvalue read-write
0 - laser off 1 - laser on
                 jnxWavelength 1.3.6.1.4.1.2636.3.71.1.1.1.1.7 unsigned32 read-write
The transmit wavelength of the laser.
                 jnxSpacing 1.3.6.1.4.1.2636.3.71.1.1.1.1.8 jnxopticschannelspacing read-only
A minimum nominal difference in frequency (GHz) between two adjacent channels.
                 jnxModulation 1.3.6.1.4.1.2636.3.71.1.1.1.1.9 unsigned32 read-only
Modulation Unknown - (1), NonPSK - (2), ODB - (3), DPSK - (4), QPSK - (5), DQPSK - (6), DPQPSK - (7), 16QAM - (8), 64QAM - (9), 256QAM - (10)
                 jnxTxOpticalPower 1.3.6.1.4.1.2636.3.71.1.1.1.1.10 integer32 read-write
Transmit optical power.
                 jnxRxOpticalPower 1.3.6.1.4.1.2636.3.71.1.1.1.1.11 integer32 read-only
Receive optical power.
                 jnxModuleTempHighThresh 1.3.6.1.4.1.2636.3.71.1.1.1.1.12 integer32 read-only
High module temerature in degree fahrenheit for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
                 jnxModuleTempLowThresh 1.3.6.1.4.1.2636.3.71.1.1.1.1.13 integer32 read-only
Low module temerature in degree fahrenheit for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
                 jnxTxPowerHighThresh 1.3.6.1.4.1.2636.3.71.1.1.1.1.14 integer32 read-write
Tx power for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
                 jnxTxPowerLowThresh 1.3.6.1.4.1.2636.3.71.1.1.1.1.15 integer32 read-write
Tx Power for a 15 minute period below which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
                 jnxRxPowerHighThresh 1.3.6.1.4.1.2636.3.71.1.1.1.1.16 integer32 read-write
Rx power for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
                 jnxRxPowerLowThresh 1.3.6.1.4.1.2636.3.71.1.1.1.1.17 integer32 read-write
Rx Power for a 15 minute period below which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
                 jnx24HourModuleTempHighThresh 1.3.6.1.4.1.2636.3.71.1.1.1.1.18 integer32 read-only
High module temerature in degree fahrenheit for a 24 hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
                 jnx24HourModuleTempLowThresh 1.3.6.1.4.1.2636.3.71.1.1.1.1.19 integer32 read-only
Low module temerature in degree fahrenheit for a 24 hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
                 jnx24HourTxPowerHighThresh 1.3.6.1.4.1.2636.3.71.1.1.1.1.20 integer32 read-write
Tx power for a 24 hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
                 jnx24HourTxPowerLowThresh 1.3.6.1.4.1.2636.3.71.1.1.1.1.21 integer32 read-write
Tx for a 24 hour period Power below which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
                 jnx24HourRxPowerHighThresh 1.3.6.1.4.1.2636.3.71.1.1.1.1.22 integer32 read-write
Rx power for a 24 hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
                 jnx24HourRxPowerLowThresh 1.3.6.1.4.1.2636.3.71.1.1.1.1.23 integer32 read-write
Rx Power for a 24 hour period below which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
                 jnxRxLosPowerWarningThresh 1.3.6.1.4.1.2636.3.71.1.1.1.1.24 integer32 read-write
Rx Power warning threshold for seeting the optical LOS warning.
                 jnxRxLosPowerAlarmThresh 1.3.6.1.4.1.2636.3.71.1.1.1.1.25 integer32 read-write
Rx Power alarm threshold for seeting the optical LOS warning.
                 jnxOpticsCurrentStatus 1.3.6.1.4.1.2636.3.71.1.1.1.1.26 bits read-only
Bits: 'powerTxLowWarning': 29, 'powerHighAlarm': 3, 'moduleTempLow24HourThreshAlert': 25, 'txPowerLow24HourThreshAlert': 21, 'txPowerLowThreshAlert': 15, 'biasCurrentLowAlarm': 6, 'lossofACPowerAlarm': 13, 'moduleTempHigh24HourThreshAlert': 24, 'txPowerHigh24HourThreshAlert': 20, 'rxPowerLow24HourThreshAlert': 23, 'temperatureHighAlarm': 7, 'powerRxHighAlarm': 26, 'powerRxLowAlarm': 27, 'powerRxHighWarning': 30, 'temperaturelowAlarm': 8, 'rxPowerHigh24HourThreshAlert': 22, 'temperaturelowWarning': 33, 'opticalLos': 1, 'txPowerHighThreshAlert': 14, 'powerRxLowWarning': 31, 'moduleTempHighThreshAlert': 18, 'powerTxHighWarning': 28, 'moduleTempLowThreshAlert': 19, 'rxPowerHighThreshAlert': 16, 'avgPowerAlarm': 11, 'temperatureHighWarning': 32, 'wavelenthLockErr': 2, 'txPLLLockAlarm': 9, 'rxLossAvgPowerAlarm': 12, 'biasCurrentHighAlarm': 5, 'powerLowAlarm': 4, 'rxPowerLowThreshAlert': 17, 'rxPLLLockAlarm': 10.
                 jnxTxPowerHighEnableTCA 1.3.6.1.4.1.2636.3.71.1.1.1.1.27 truthvalue read-write
Enable/Disable for the Tx Power High TCA.
                 jnxTxPowerLowEnableTCA 1.3.6.1.4.1.2636.3.71.1.1.1.1.28 truthvalue read-write
Enable/Disable for the Tx Power Low TCA.
                 jnxRxPowerHighEnableTCA 1.3.6.1.4.1.2636.3.71.1.1.1.1.29 truthvalue read-write
Enable/Disable for the Rx Power High TCA.
                 jnxRxPowerLowEnableTCA 1.3.6.1.4.1.2636.3.71.1.1.1.1.30 truthvalue read-write
Enable/Disable for the Rx Power Low TCA.
                 jnxModuleTempHighEnableTCA 1.3.6.1.4.1.2636.3.71.1.1.1.1.31 truthvalue read-write
Enable/Disable for the Module Temp High TCA.
                 jnxModuleTempLowEnableTCA 1.3.6.1.4.1.2636.3.71.1.1.1.1.32 truthvalue read-write
Enable/Disable for the Module Temp Low TCA.
                 jnxCarFreqOffsetHighEnableTCA 1.3.6.1.4.1.2636.3.71.1.1.1.1.33 truthvalue read-write
Enable/Disable for the Carrier Frequency Offset High TCA.
                 jnxCarFreqOffsetLowEnableTCA 1.3.6.1.4.1.2636.3.71.1.1.1.1.34 truthvalue read-write
Enable/Disable for the CarrierFreqOffetLow TCA's.
                 jnxCarFreqOffsetHighThresh 1.3.6.1.4.1.2636.3.71.1.1.1.1.35 integer32 read-write
Carrier frequency offset for a 15 minute period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
                 jnx24HourCarFreqOffsetHighThresh 1.3.6.1.4.1.2636.3.71.1.1.1.1.36 integer32 read-write
Carrier frequency offset for a 24 Hour period above which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
                 jnxCarFreqOffsetLowThresh 1.3.6.1.4.1.2636.3.71.1.1.1.1.37 integer32 read-write
Carrier frequency offset for a 15 minute period Low which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
                 jnx24HourCarFreqOffsetLowThresh 1.3.6.1.4.1.2636.3.71.1.1.1.1.38 integer32 read-write
Carrier frequency offset for a 24 Hour period Low which a Threshold Crossing Alert (TCA) should be sent. Only one TCA will be sent per period .
         jnxOpticsTraceToneCfgTable 1.3.6.1.4.1.2636.3.71.1.1.2 no-access
Information about the optics tests.
             jnxOpticsTraceToneCfgEntry 1.3.6.1.4.1.2636.3.71.1.1.2.1 no-access
Information about the optics FRU's.
                 jnxOpticsTraceToneCfgContainerIndex 1.3.6.1.4.1.2636.3.71.1.1.2.1.1 integer32 no-access
The associated jnxContentsContainerIndex - eg shelf..
                 jnxOpticsTraceToneCfgL1Index 1.3.6.1.4.1.2636.3.71.1.1.2.1.2 integer32 no-access
The level one index associated with this subject ... eg fpc slot.
                 jnxOpticsTraceToneCfgL2Index 1.3.6.1.4.1.2636.3.71.1.1.2.1.3 integer32 no-access
The level two index associated with this subject .. eg pic slot.
                 jnxOpticsTraceToneCfgL3Index 1.3.6.1.4.1.2636.3.71.1.1.2.1.4 integer32 no-access
The level three index associated with this subject.. eg port.
                 jnxOpticsTraceToneCfgTxEnable 1.3.6.1.4.1.2636.3.71.1.1.2.1.5 truthvalue read-write
This will enable/disable the transmit Trace tone feature.
                 jnxOpticsTraceToneCfgRxEnable 1.3.6.1.4.1.2636.3.71.1.1.2.1.6 truthvalue read-write
This will enable/disable the receive Trace tone feature.
                 jnxOpticsTraceToneCfgDestId 1.3.6.1.4.1.2636.3.71.1.1.2.1.7 octet string read-write
This is the destination Id of the link ID/ the chassis and the blade. The transmit messages will also have the src id which is this chassis id and this port info.
                 jnxOpticsTraceToneCfgTxMsg 1.3.6.1.4.1.2636.3.71.1.1.2.1.8 octet string read-write
This will be the transmit data in the tracetone message.
                 jnxOpticsTraceToneCfgRxMsg 1.3.6.1.4.1.2636.3.71.1.1.2.1.9 octet string read-only
This will be the receive data in the trace tone message.
         jnxOpticsNotificationTrigDefaultHoldtimeUp 1.3.6.1.4.1.2636.3.71.1.1.3 integer32 read-write
This object will indicate the time (ms) for the defect to persist before it is declared an alarm.
         jnxOpticsNotificationTrigDefaultHoldtimeDown 1.3.6.1.4.1.2636.3.71.1.1.4 integer32 read-write
This object will indicate the time (ms) for the defect to absent before the alarm is cleared.
         jnxOpticsNotificationTrigTable 1.3.6.1.4.1.2636.3.71.1.1.5 no-access
Information about the otn Alarm/Alart/Info trigger table.
             jnxOpticsNotificationTrigEntry 1.3.6.1.4.1.2636.3.71.1.1.5.1 no-access
A conceptual row that contains information about the Otn Alarm Trigger Table.
                 jnxOpticsNotificationTrigContainerIndex 1.3.6.1.4.1.2636.3.71.1.1.5.1.1 integer32 no-access
The associated jnxContentsContainerIndex - eg shelf.
                 jnxOpticsNotificationTrigL1Index 1.3.6.1.4.1.2636.3.71.1.1.5.1.2 integer32 no-access
The level one index associated with this subject ... eg fpc slot.
                 jnxOpticsNotificationTrigL2Index 1.3.6.1.4.1.2636.3.71.1.1.5.1.3 integer32 no-access
The level two index associated with this subject .. eg pic slot.
                 jnxOpticsNotificationTrigL3Index 1.3.6.1.4.1.2636.3.71.1.1.5.1.4 integer32 no-access
The level three index associated with this subject.. eg port.
                 jnxOpticsNotificationTrigAlmId 1.3.6.1.4.1.2636.3.71.1.1.5.1.5 jnxopticsnotificationid no-access
This will be the type of Alarm as defined by JnxOpticsNotificationId
                 jnxOpticsNotificationTrigSeverity 1.3.6.1.4.1.2636.3.71.1.1.5.1.6 jnxopticsseverity read-write
This will be the Severity of the Notification.
                 jnxOpticsNotificationTrigIgnore 1.3.6.1.4.1.2636.3.71.1.1.5.1.7 truthvalue read-write
This object will ignore the alarm when set.
                 jnxOpticsNotificationTrigHoldtimeUp 1.3.6.1.4.1.2636.3.71.1.1.5.1.8 integer32 read-write
This object will indicate the time (ms) for the defect to persist before it is declared an alarm.
                 jnxOpticsNotificationTrigHoldtimeDown 1.3.6.1.4.1.2636.3.71.1.1.5.1.9 integer32 read-write
This object will indicate the time (ms) the defect is absent before the alarm is cleared.
                 jnxOpticsTrigServiceStateAction 1.3.6.1.4.1.2636.3.71.1.1.5.1.10 jnxopticsservicestateaction read-only
This will indicate whether this alarm is service affecting or not .
         jnxOpticsClearAllPMs 1.3.6.1.4.1.2636.3.71.1.1.6 truthvalue read-write
To clear all optics Performance monitoring counters on all interfaces.
         jnxOpticsClearIfPMsTable 1.3.6.1.4.1.2636.3.71.1.1.7 no-access
To clear optics Performance monitoring counters on this interfaces
             jnxOpticsClearIfPMsEntry 1.3.6.1.4.1.2636.3.71.1.1.7.1 no-access
A conceptual row that s used to clear the Optics PM Table.
                 jnxOpticsClearCurrent 1.3.6.1.4.1.2636.3.71.1.1.7.1.1 truthvalue read-write
1- to clear all the Current Optics PM's for this interface
                 jnxOpticsClearInterfaceInterval 1.3.6.1.4.1.2636.3.71.1.1.7.1.2 truthvalue read-write
1- to clear all the Optics PM's intervals(1-96) for this interface
                 jnxOpticsClearInterfaceDay 1.3.6.1.4.1.2636.3.71.1.1.7.1.3 truthvalue read-write
1 - to clear all the Current Day and Previous Day Optics PM's for this interface
                 jnxOpticsClearInterfaceAll 1.3.6.1.4.1.2636.3.71.1.1.7.1.4 truthvalue read-write
1 - to clear all the Optics PM's for this interface
     jnxOpticsPerformanceMonitoring 1.3.6.1.4.1.2636.3.71.1.2
         jnxOpticsPMCurrentTable 1.3.6.1.4.1.2636.3.71.1.2.1 no-access
A table of current PM entries.
             jnxOpticsPMCurrentEntry 1.3.6.1.4.1.2636.3.71.1.2.1.1 no-access
A conceptual row that contains information about the PM Current Table.
                 jnxPMCurChromaticDispersion 1.3.6.1.4.1.2636.3.71.1.2.1.1.1 integer32 read-only
Residual Chromatic Dispersion measured at Rx Transceiver port
                 jnxPMCurDiffGroupDelay 1.3.6.1.4.1.2636.3.71.1.2.1.1.2 integer32 read-only
Differential group delay
                 jnxPMCurPolarizationState 1.3.6.1.4.1.2636.3.71.1.2.1.1.3 integer32 read-only
Polarization state
                 jnxPMCurPolarDepLoss 1.3.6.1.4.1.2636.3.71.1.2.1.1.4 integer32 read-only
The polarisation dependent loss (PDL) is the difference (in dB) between the maximum and minimum values of the channel insertion loss (or gain) of the black-link from point SS to RS due to a variation of the state of polarization (SOP) over all SOPs
                 jnxPMCurQ 1.3.6.1.4.1.2636.3.71.1.2.1.1.5 integer32 read-only
'Q' factor estimated at Rx Transceiver port
                 jnxPMCurSNR 1.3.6.1.4.1.2636.3.71.1.2.1.1.6 integer32 read-only
SNR - signal to noise ratio
                 jnxPMCurTxOutputPower 1.3.6.1.4.1.2636.3.71.1.2.1.1.7 integer32 read-only
TxOutputPower - transmit output power
                 jnxPMCurRxInputPower 1.3.6.1.4.1.2636.3.71.1.2.1.1.8 integer32 read-only
RxInputPower - receive output power
                 jnxPMCurMinChromaticDispersion 1.3.6.1.4.1.2636.3.71.1.2.1.1.9 integer32 read-only
Min Residual Chromatic Dispersion measured at Rx Transceiver port
                 jnxPMCurMaxChromaticDispersion 1.3.6.1.4.1.2636.3.71.1.2.1.1.10 integer32 read-only
Max Residual Chromatic Dispersion measured at Rx Transceiver port
                 jnxPMCurAvgChromaticDispersion 1.3.6.1.4.1.2636.3.71.1.2.1.1.11 integer32 read-only
Average Residual Chromatic Dispersion measured at Rx Transceiver port
                 jnxPMCurMinDiffGroupDelay 1.3.6.1.4.1.2636.3.71.1.2.1.1.12 integer32 read-only
Min Differential group delay
                 jnxPMCurMaxDiffGroupDelay 1.3.6.1.4.1.2636.3.71.1.2.1.1.13 integer32 read-only
Max Differential group delay
                 jnxPMCurAvgDiffGroupDelay 1.3.6.1.4.1.2636.3.71.1.2.1.1.14 integer32 read-only
Average Differential group delay
                 jnxPMCurMinPolarState 1.3.6.1.4.1.2636.3.71.1.2.1.1.15 integer32 read-only
Min Polarization state
                 jnxPMCurMaxPolarState 1.3.6.1.4.1.2636.3.71.1.2.1.1.16 integer32 read-only
Max Polarization state
                 jnxPMCurAvgPolarState 1.3.6.1.4.1.2636.3.71.1.2.1.1.17 integer32 read-only
Avg Polarization state
                 jnxPMCurMinPolarDepLoss 1.3.6.1.4.1.2636.3.71.1.2.1.1.18 integer32 read-only
Min - The polarisation dependent loss (PDL)
                 jnxPMCurMaxPolarDepLoss 1.3.6.1.4.1.2636.3.71.1.2.1.1.19 integer32 read-only
Max - The polarisation dependent loss (PDL)
                 jnxPMCurAvgPolarDepLoss 1.3.6.1.4.1.2636.3.71.1.2.1.1.20 integer32 read-only
Avg - The polarisation dependent loss (PDL)
                 jnxPMCurMinQ 1.3.6.1.4.1.2636.3.71.1.2.1.1.21 integer32 read-only
Min 'Q' factor estimated at Rx Transceiver port
                 jnxPMCurMaxQ 1.3.6.1.4.1.2636.3.71.1.2.1.1.22 integer32 read-only
Max 'Q' factor estimated at Rx Transceiver port
                 jnxPMCurAvgQ 1.3.6.1.4.1.2636.3.71.1.2.1.1.23 integer32 read-only
Avg 'Q' factor estimated at Rx Transceiver port
                 jnxPMCurMinSNR 1.3.6.1.4.1.2636.3.71.1.2.1.1.24 integer32 read-only
Min SNR - signal to noise ratio
                 jnxPMCurMaxSNR 1.3.6.1.4.1.2636.3.71.1.2.1.1.25 integer32 read-only
Max SNR - signal to noise ratio
                 jnxPMCurAvgSNR 1.3.6.1.4.1.2636.3.71.1.2.1.1.26 integer32 read-only
Avg SNR - signal to noise ratio
                 jnxPMCurMinTxOutputPower 1.3.6.1.4.1.2636.3.71.1.2.1.1.27 integer32 read-only
Min TxOutputPower - transmit output power
                 jnxPMCurMaxTxOutputPower 1.3.6.1.4.1.2636.3.71.1.2.1.1.28 integer32 read-only
Max TxOutputPower - transmit output power
                 jnxPMCurAvgTxOutputPower 1.3.6.1.4.1.2636.3.71.1.2.1.1.29 integer32 read-only
Avg TxOutputPower - transmit output power
                 jnxPMCurMinRxInputPower 1.3.6.1.4.1.2636.3.71.1.2.1.1.30 integer32 read-only
Min RxInputPower - receive output power
                 jnxPMCurMaxRxInputPower 1.3.6.1.4.1.2636.3.71.1.2.1.1.31 integer32 read-only
Max RxInputPower - receive output power
                 jnxPMCurAvgRxInputPower 1.3.6.1.4.1.2636.3.71.1.2.1.1.32 integer32 read-only
Avg RxInputPower - receive output power
                 jnxPMCurSuspectedFlag 1.3.6.1.4.1.2636.3.71.1.2.1.1.33 truthvalue read-only
If true, the data in this entry may be unreliable.
                 jnxPMCurSuspectReason 1.3.6.1.4.1.2636.3.71.1.2.1.1.34 integer32 read-only
If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detected 5 - cleared by user 6 - interval too short secs < 890 7 - interval too long secs > 910 8 - near end unavailable 9 - far end unavailable 10 - partial data 11 - missing intervals due to restarts
                 jnxPMCurTxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.1.1.35 integer32 read-only
Trasmit LaserBiasCurrent measured at Transceiver port
                 jnxPMCurMinTxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.1.1.36 integer32 read-only
Minimum trasmit LaserBiasCurrent measured at Transceiver port
                 jnxPMCurMaxTxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.1.1.37 integer32 read-only
Maximum trasmit LaserBiasCurrent measured at Transceiver port
                 jnxPMCurAvgTxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.1.1.38 integer32 read-only
Average LaserBiasCurrent measured at Transceiver port
                 jnxPMCurTemperature 1.3.6.1.4.1.2636.3.71.1.2.1.1.39 integer32 read-only
Temperature measured at Transceiver port
                 jnxPMCurMinTemperature 1.3.6.1.4.1.2636.3.71.1.2.1.1.40 integer32 read-only
Minimum Temperature measured at Transceiver port
                 jnxPMCurMaxTemperature 1.3.6.1.4.1.2636.3.71.1.2.1.1.41 integer32 read-only
Maximum Temperature measure at Transceiver port
                 jnxPMCurAvgTemperature 1.3.6.1.4.1.2636.3.71.1.2.1.1.42 integer32 read-only
Average Temperature measure at Transceiver port
                 jnxPMCurCarFreqOffset 1.3.6.1.4.1.2636.3.71.1.2.1.1.43 integer32 read-only
Carrier frequency offset measured at Transceiver port
                 jnxPMCurMinCarFreqOffset 1.3.6.1.4.1.2636.3.71.1.2.1.1.44 integer32 read-only
Minimum Carrier frequency offset measured at Transceiver port
                 jnxPMCurMaxCarFreqOffset 1.3.6.1.4.1.2636.3.71.1.2.1.1.45 integer32 read-only
Maximum Carrier frequency offset measured at Transceiver port
                 jnxPMCurAvgCarFreqOffset 1.3.6.1.4.1.2636.3.71.1.2.1.1.46 integer32 read-only
Average Carrier frequency offset measured at Transceiver port
                 jnxPMCurRxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.1.1.47 integer32 read-only
Received LaserBiasCurrent measured at Transceiver port
                 jnxPMCurMinRxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.1.1.48 integer32 read-only
Received Minimum LaserBiasCurrent measured at Transceiver port
                 jnxPMCurMaxRxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.1.1.49 integer32 read-only
Received Maximum LaserBiasCurrent measured at Transceiver port
                 jnxPMCurAvgRxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.1.1.50 integer32 read-only
Received Average LaserBiasCurrent measured at Transceiver port
         jnxOpticsPMIntervalTable 1.3.6.1.4.1.2636.3.71.1.2.2 no-access
A table of current PM entries.
             jnxOpticsPMIntervalEntry 1.3.6.1.4.1.2636.3.71.1.2.2.1 no-access
A conceptual row that contains information about the PM Interval Table.
                 jnxOpticsPMIntervalNumber 1.3.6.1.4.1.2636.3.71.1.2.2.1.1 unsigned32 no-access
This is the 15 mintute interavl number.
                 jnxPMIntMinChromaticDispersion 1.3.6.1.4.1.2636.3.71.1.2.2.1.2 integer32 read-only
Residual Chromatic Dispersion measured at Rx Transceiver port - min in the 15 minute interval
                 jnxPMIntMaxChromaticDispersion 1.3.6.1.4.1.2636.3.71.1.2.2.1.3 integer32 read-only
Residual Chromatic Dispersion measured at Rx Transceiver port - max in the 15 minute interval
                 jnxPMIntAvgChromaticDispersion 1.3.6.1.4.1.2636.3.71.1.2.2.1.4 integer32 read-only
Residual Chromatic Dispersion measured at Rx Transceiver port - average in the 15 minute interval
                 jnxPMIntMinDiffGroupDelay 1.3.6.1.4.1.2636.3.71.1.2.2.1.5 integer32 read-only
Differential group delay measured at Rx Transceiver port -- min in the 15 minute interval
                 jnxPMIntMaxDiffGroupDelay 1.3.6.1.4.1.2636.3.71.1.2.2.1.6 integer32 read-only
Differential group delay measured at Rx Transceiver port -- max in the 15 minute interval
                 jnxPMIntAvgDiffGroupDelay 1.3.6.1.4.1.2636.3.71.1.2.2.1.7 integer32 read-only
Differential group delay measured at Rx Transceiver port -- average in the 15 minute interval
                 jnxPMIntMinPolarState 1.3.6.1.4.1.2636.3.71.1.2.2.1.8 integer32 read-only
Polarization state -- min in the 15 minute interval
                 jnxPMIntMaxPolarState 1.3.6.1.4.1.2636.3.71.1.2.2.1.9 integer32 read-only
Polarization state -- max in the 15 minute interval
                 jnxPMIntAvgPolarState 1.3.6.1.4.1.2636.3.71.1.2.2.1.10 integer32 read-only
Polarization state -- average in the 15 minute interval
                 jnxPMIntMinPolarDependentLoss 1.3.6.1.4.1.2636.3.71.1.2.2.1.11 integer32 read-only
Polarization Dependent Loss -- min in the 15 minute interval
                 jnxPMIntMaxPolarDependentLoss 1.3.6.1.4.1.2636.3.71.1.2.2.1.12 integer32 read-only
Polarization Dependent Loss -- max in the 15 minute interval
                 jnxPMIntAvgPolarDependentLoss 1.3.6.1.4.1.2636.3.71.1.2.2.1.13 integer32 read-only
Polarization Dependent Loss -- average in the 15 minute interval
                 jnxPMIntMinQ 1.3.6.1.4.1.2636.3.71.1.2.2.1.14 integer32 read-only
Q -- min in the 15 minute interval
                 jnxPMIntMaxQ 1.3.6.1.4.1.2636.3.71.1.2.2.1.15 integer32 read-only
Q -- max in the 15 minute interval
                 jnxPMIntAvgQ 1.3.6.1.4.1.2636.3.71.1.2.2.1.16 integer32 read-only
Q -- Avg in the 15 minute interval
                 jnxPMIntMinSNR 1.3.6.1.4.1.2636.3.71.1.2.2.1.17 integer32 read-only
SNR -- min in the 15 minute interval
                 jnxPMIntMaxSNR 1.3.6.1.4.1.2636.3.71.1.2.2.1.18 integer32 read-only
SNR -- max in the 15 minute interval
                 jnxPMIntAvgSNR 1.3.6.1.4.1.2636.3.71.1.2.2.1.19 integer32 read-only
SNR -- avg in the 15 minute interval
                 jnxPMIntMinTxOutputPower 1.3.6.1.4.1.2636.3.71.1.2.2.1.20 integer32 read-only
TxOutputPower -- min in the 15 minute interval
                 jnxPMIntMaxTxOutputPower 1.3.6.1.4.1.2636.3.71.1.2.2.1.21 integer32 read-only
TxOutputPower -- max in the 15 minute interval
                 jnxPMIntAvgTxOutputPower 1.3.6.1.4.1.2636.3.71.1.2.2.1.22 integer32 read-only
TxOutputPower -- average in the 15 minute interval
                 jnxPMIntMinRxInputPower 1.3.6.1.4.1.2636.3.71.1.2.2.1.23 integer32 read-only
RxInputPower -- min in the 15 minute interval
                 jnxPMIntMaxRxInputPower 1.3.6.1.4.1.2636.3.71.1.2.2.1.24 integer32 read-only
RxInputPower -- max in the 15 minute interval
                 jnxPMIntAvgRxInputPower 1.3.6.1.4.1.2636.3.71.1.2.2.1.25 integer32 read-only
RxInputPower -- average in the 15 minute interval
                 jnxPMIntTimeStamp 1.3.6.1.4.1.2636.3.71.1.2.2.1.26 dateandtime read-only
Time stamp PM interval
                 jnxPMIntSuspectedFlag 1.3.6.1.4.1.2636.3.71.1.2.2.1.27 truthvalue read-only
If true, the data in this entry may be unreliable.
                 jnxPMIntSuspectReason 1.3.6.1.4.1.2636.3.71.1.2.2.1.28 integer32 read-only
If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detected 5 - cleared by user 6 - interval too short secs < 890 7 - interval too long secs > 910 8 - near end unavailable 9 - far end unavailable 10 - partial data 11 - missing intervals due to restarts
                 jnxPMIntMinTxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.2.1.29 integer32 read-only
Transmit Minimum LaserBiasCurrent measured at Transceiver port
                 jnxPMIntMaxTxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.2.1.30 integer32 read-only
Transmit Maximum LaserBiasCurrent measured at Transceiver port
                 jnxPMIntAvgTxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.2.1.31 integer32 read-only
Transmit Average LaserBiasCurrent measured at Transceiver port
                 jnxPMIntMinTemperature 1.3.6.1.4.1.2636.3.71.1.2.2.1.32 integer32 read-only
Minimum Temperature measured at Transceiver port
                 jnxPMIntMaxTemperature 1.3.6.1.4.1.2636.3.71.1.2.2.1.33 integer32 read-only
Maximum Temperature measure at Transceiver port
                 jnxPMIntAvgTemperature 1.3.6.1.4.1.2636.3.71.1.2.2.1.34 integer32 read-only
Average Temperature measure at Transceiver port
                 jnxPMIntMinCarFreqOffset 1.3.6.1.4.1.2636.3.71.1.2.2.1.35 integer32 read-only
Minimum Carrier frequency offset measured at Transceiver port
                 jnxPMIntMaxCarFreqOffset 1.3.6.1.4.1.2636.3.71.1.2.2.1.36 integer32 read-only
Maximum Carrier frequency offset measured at Transceiver port
                 jnxPMIntAvgCarFreqOffset 1.3.6.1.4.1.2636.3.71.1.2.2.1.37 integer32 read-only
Average Carrier frequency offset measured at Transceiver port
                 jnxPMIntMinRxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.2.1.38 integer32 read-only
Receive Minimum LaserBiasCurrent measured at Transceiver port
                 jnxPMIntMaxRxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.2.1.39 integer32 read-only
Receive Maximum LaserBiasCurrent measured at Transceiver port
                 jnxPMIntAvgRxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.2.1.40 integer32 read-only
Receive Average LaserBiasCurrent measured at Transceiver port
         jnxOpticsPMDayTable 1.3.6.1.4.1.2636.3.71.1.2.3 no-access
A table of current PM Day entries.
             jnxOpticsPMDayEntry 1.3.6.1.4.1.2636.3.71.1.2.3.1 no-access
A conceptual row that contains information about the PM Day Table
                 jnxOpticsPMDayIndex 1.3.6.1.4.1.2636.3.71.1.2.3.1.1 unsigned32 no-access
This is 1 - cur day/ 2 - prev day
                 jnxPMDayMinChromaticDispersion 1.3.6.1.4.1.2636.3.71.1.2.3.1.2 integer32 read-only
Residual Chromatic Dispersion measured at Rx Transceiver port - min in the day
                 jnxPMDayMaxChromaticDispersion 1.3.6.1.4.1.2636.3.71.1.2.3.1.3 integer32 read-only
Residual Chromatic Dispersion measured at Rx Transceiver port - max in the day
                 jnxPMDayAvgChromaticDispersion 1.3.6.1.4.1.2636.3.71.1.2.3.1.4 integer32 read-only
Residual Chromatic Dispersion measured at Rx Transceiver port - average in the day
                 jnxPMDayMinDiffGroupDelay 1.3.6.1.4.1.2636.3.71.1.2.3.1.5 integer32 read-only
Differential Group Delay measured at Rx Transceiver port -- min in the day
                 jnxPMDayMaxDiffGroupDelay 1.3.6.1.4.1.2636.3.71.1.2.3.1.6 integer32 read-only
Differential Group Delay measured at Rx Transceiver port -- max in the day
                 jnxPMDayAvgDiffGroupDelay 1.3.6.1.4.1.2636.3.71.1.2.3.1.7 integer32 read-only
Differential Group Delay measured at Rx Transceiver port -- average in the day
                 jnxPMDayMinPolarState 1.3.6.1.4.1.2636.3.71.1.2.3.1.8 integer32 read-only
Polarization state -- min in the day
                 jnxPMDayMaxPolarState 1.3.6.1.4.1.2636.3.71.1.2.3.1.9 integer32 read-only
Polarization state -- max in the day
                 jnxPMDayAvgPolarState 1.3.6.1.4.1.2636.3.71.1.2.3.1.10 integer32 read-only
Polarization state -- average in the day
                 jnxPMDayMinPolarDependentLoss 1.3.6.1.4.1.2636.3.71.1.2.3.1.11 integer32 read-only
Polarization Dependent Loss -- min in the day
                 jnxPMDayMaxPolarDependentLoss 1.3.6.1.4.1.2636.3.71.1.2.3.1.12 integer32 read-only
Polarization Dependent Loss -- max in the day
                 jnxPMDayAvgPolarDependentLoss 1.3.6.1.4.1.2636.3.71.1.2.3.1.13 integer32 read-only
Polarization Dependent Loss -- average in the day interval
                 jnxPMDayMinQ 1.3.6.1.4.1.2636.3.71.1.2.3.1.14 integer32 read-only
Q -- min in the day
                 jnxPMDayMaxQ 1.3.6.1.4.1.2636.3.71.1.2.3.1.15 integer32 read-only
Q -- max in the day
                 jnxPMDayAvgQ 1.3.6.1.4.1.2636.3.71.1.2.3.1.16 integer32 read-only
Q -- Avg in the day
                 jnxPMDayMinSNR 1.3.6.1.4.1.2636.3.71.1.2.3.1.17 integer32 read-only
SNR -- min in the day
                 jnxPMDayMaxSNR 1.3.6.1.4.1.2636.3.71.1.2.3.1.18 integer32 read-only
SNR -- max in the day
                 jnxPMDayAvgSNR 1.3.6.1.4.1.2636.3.71.1.2.3.1.19 integer32 read-only
SNR -- avg in the day
                 jnxPMDayMinTxOutputPower 1.3.6.1.4.1.2636.3.71.1.2.3.1.20 integer32 read-only
TxOutputPower -- min in the day
                 jnxPMDayMaxTxOutputPower 1.3.6.1.4.1.2636.3.71.1.2.3.1.21 integer32 read-only
TxOutputPower -- max in the day.
                 jnxPMDayAvgTxOutputPower 1.3.6.1.4.1.2636.3.71.1.2.3.1.22 integer32 read-only
TxOutputPower -- average in the day.
                 jnxPMDayMinRxInputPower 1.3.6.1.4.1.2636.3.71.1.2.3.1.23 integer32 read-only
RxInputPower -- min in the day.
                 jnxPMDayMaxRxInputPower 1.3.6.1.4.1.2636.3.71.1.2.3.1.24 integer32 read-only
RxInputPower -- max in the day.
                 jnxPMDayAvgRxInputPower 1.3.6.1.4.1.2636.3.71.1.2.3.1.25 integer32 read-only
RxInputPower -- average in the day.
                 jnxPMDayTimeStamp 1.3.6.1.4.1.2636.3.71.1.2.3.1.26 dateandtime read-only
Time for the Day.
                 jnxPMDaySuspectedFlag 1.3.6.1.4.1.2636.3.71.1.2.3.1.27 truthvalue read-only
If true, the data in this entry may be unreliable.
                 jnxPMDaySuspectReason 1.3.6.1.4.1.2636.3.71.1.2.3.1.28 integer32 read-only
If SuspectedFlag is true, the reson for the PM data being suspect. 0 - not applicable 1 - unknown 2 - new object 3 - interface disabled 4 - clock shift detected 5 - cleared by user 6 - partial data 7 - one or more intervals are invaild
                 jnxPMDayMinTxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.3.1.29 integer32 read-only
Transmit LaserBiasCurrent measured at Transceiver port
                 jnxPMDayMaxTxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.3.1.30 integer32 read-only
Transmit Minimum LaserBiasCurrent measured at Transceiver port
                 jnxPMDayAvgTxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.3.1.31 integer32 read-only
Transmit Maximum LaserBiasCurrent measured at Transceiver port
                 jnxPMDayMinTemperature 1.3.6.1.4.1.2636.3.71.1.2.3.1.32 integer32 read-only
Minimum Temperature measured at Transceiver port
                 jnxPMDayMaxTemperature 1.3.6.1.4.1.2636.3.71.1.2.3.1.33 integer32 read-only
Maximum Temperature measure at Transceiver port
                 jnxPMDayAvgTemperature 1.3.6.1.4.1.2636.3.71.1.2.3.1.34 integer32 read-only
Average Temperature measure at Transceiver port
                 jnxPMDayMinCarFreqOffset 1.3.6.1.4.1.2636.3.71.1.2.3.1.35 integer32 read-only
Minimum Carrier frequency offset measured at Transceiver port
                 jnxPMDayMaxCarFreqOffset 1.3.6.1.4.1.2636.3.71.1.2.3.1.36 integer32 read-only
Maximum Carrier frequency offset measured at Transceiver port
                 jnxPMDayAvgCarFreqOffset 1.3.6.1.4.1.2636.3.71.1.2.3.1.37 integer32 read-only
Average Carrier frequency offset measured at Transceiver port
                 jnxPMDayMinRxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.3.1.38 integer32 read-only
Receive LaserBiasCurrent measured at Transceiver port
                 jnxPMDayMaxRxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.3.1.39 integer32 read-only
Receive Minimum LaserBiasCurrent measured at Transceiver port
                 jnxPMDayAvgRxLaserBiasCurrent 1.3.6.1.4.1.2636.3.71.1.2.3.1.40 integer32 read-only
Receive Maximum LaserBiasCurrent measured at Transceiver port
     jnxOpticsAlarm 1.3.6.1.4.1.2636.3.71.1.3
         jnxOpticsNotificationTable 1.3.6.1.4.1.2636.3.71.1.3.1 no-access
A table of Notification entries.
             jnxOpticsNotificationEntry 1.3.6.1.4.1.2636.3.71.1.3.1.1 no-access
A conceptual entry in the Notification table.
                 jnxOpticsNotificationLocation 1.3.6.1.4.1.2636.3.71.1.3.1.1.1 jnxopticslocation no-access
The object identifies indicates if this entry was for Near end/Far end.
                 jnxOpticsNotificationDirection 1.3.6.1.4.1.2636.3.71.1.3.1.1.2 jnxopticsdirection no-access
The object identifies indicates if this entry was for for the Tx/Rx or both.
                 jnxOpticsLastNotificationId 1.3.6.1.4.1.2636.3.71.1.3.1.1.3 jnxopticsnotificationid no-access
The object identifies the OTN alarm that most recently was set or cleared.
                 jnxOpticsNotificationSeverity 1.3.6.1.4.1.2636.3.71.1.3.1.1.4 jnxopticsseverity no-access
The object identifies the severity of the last alarm/alert that most recently was set or cleared.
                 jnxOpticsNotificationDate 1.3.6.1.4.1.2636.3.71.1.3.1.1.5 dateandtime no-access
This specifies the date and time when this alarm occurred.
 jnxOpticsNotificationPrefix 1.3.6.1.4.1.2636.4.22.0
     jnxOpticsNotificationSet 1.3.6.1.4.1.2636.4.22.0.1
Notification of a recently set optics alarm.
     jnxOpticsNotificationCleared 1.3.6.1.4.1.2636.4.22.0.2
Notification of a recently cleared optics alarm.